From 8cbf47f12cfbf4ef8130b3e91bc1b29044238af5 Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Wed, 4 Dec 2013 11:03:20 -0600 Subject: baytrail: add lpe codec clock configuration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add device tree option to determine if the LPE audio codec has a platform clock signal connected to it from the SoC. If a frequency is selected the platform clock number is used to enable the clock. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted rambi with 25MHz option. Probed pin to audio codec. Noted 25MHz clock. Change-Id: I67d0d034f30ae1c7ee8269c0aea43e8c92ff868c Signed-off-by: Aaron Durbin Reviewed-on: https://chromium-review.googlesource.com/178780 Reviewed-by: Shawn Nematbakhsh Reviewed-on: http://review.coreboot.org/4986 Reviewed-by: Kyösti Mälkki Tested-by: build bot (Jenkins) --- src/soc/intel/baytrail/baytrail/pmc.h | 11 ++++++++ src/soc/intel/baytrail/chip.h | 4 +++ src/soc/intel/baytrail/lpe.c | 51 ++++++++++++++++++++++++++++++----- 3 files changed, 59 insertions(+), 7 deletions(-) diff --git a/src/soc/intel/baytrail/baytrail/pmc.h b/src/soc/intel/baytrail/baytrail/pmc.h index 088083fcdc..ab2e169243 100644 --- a/src/soc/intel/baytrail/baytrail/pmc.h +++ b/src/soc/intel/baytrail/baytrail/pmc.h @@ -73,6 +73,17 @@ # define ROUTE_NONE 0 # define ROUTE_SMI 1 # define ROUTE_SCI 2 +#define PLT_CLK_CTL_0 0x60 +#define PLT_CLK_CTL_1 0x64 +#define PLT_CLK_CTL_2 0x68 +#define PLT_CLK_CTL_3 0x6c +#define PLT_CLK_CTL_4 0x70 +#define PLT_CLK_CTL_5 0x74 +# define CLK_FREQ_25MHZ (0x0 << 2) +# define CLK_FREQ_19P2MHZ (0x1 << 2) +# define CLK_CTL_D3_LPE (0x0 << 0) +# define CLK_CTL_ON (0x1 << 0) +# define CLK_CTL_OFF (0x2 << 0) /* IO Mapped registers behind ACPI_BASE_ADDRESS */ #define PM1_STS 0x00 diff --git a/src/soc/intel/baytrail/chip.h b/src/soc/intel/baytrail/chip.h index 4c8897c752..250f644cac 100644 --- a/src/soc/intel/baytrail/chip.h +++ b/src/soc/intel/baytrail/chip.h @@ -47,6 +47,10 @@ struct soc_intel_baytrail_config { uint32_t usb2_per_port_rcomp_hs_pullup2; uint32_t usb2_per_port_lane3; uint32_t usb2_per_port_rcomp_hs_pullup3; + + /* LPE Audio Clock configuration. */ + int lpe_codec_clk_freq; /* 19 or 25 are valid. */ + int lpe_codec_clk_num; /* Platform clock pins. [0:5] are valid. */ }; extern struct chip_operations soc_intel_baytrail_ops; diff --git a/src/soc/intel/baytrail/lpe.c b/src/soc/intel/baytrail/lpe.c index e422ff6262..72ac4cb295 100644 --- a/src/soc/intel/baytrail/lpe.c +++ b/src/soc/intel/baytrail/lpe.c @@ -17,23 +17,60 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include #include #include -#include +#include +#include +#include #include +#include "chip.h" -static void lpe_init(device_t dev) + +static void setup_codec_clock(device_t dev) { uint32_t reg; + int clk_reg; + struct soc_intel_baytrail_config *config; + const char *freq_str; + + config = dev->chip_info; + switch (config->lpe_codec_clk_freq) { + case 19: + freq_str = "19.2"; + reg = CLK_FREQ_19P2MHZ; + break; + case 25: + freq_str = "25"; + reg = CLK_FREQ_25MHZ; + break; + default: + printk(BIOS_DEBUG, "LPE codec clock not required.\n"); + return; + } + + /* Default to always running. */ + reg |= CLK_CTL_ON; + + if (config->lpe_codec_clk_num < 0 || config->lpe_codec_clk_num > 5) { + printk(BIOS_DEBUG, "Invalid LPE codec clock number.\n"); + return; + } + + printk(BIOS_DEBUG, "LPE Audio codec clock set to %sMHz.\n", freq_str); - /* Work around for Audio Clock. */ - reg = iosf_ccu_read(PLT_CLK_CTRL_3); - reg &= ~0xff; - reg |= PLT_CLK_CTRL_25MHZ_FREQ | PLT_CLK_CTRL_SELECT_FREQ; - iosf_ccu_write(PLT_CLK_CTRL_3, reg); + clk_reg = PMC_BASE_ADDRESS + PLT_CLK_CTL_0; + clk_reg += 4 * config->lpe_codec_clk_num; + + write32(clk_reg, (read32(clk_reg) & ~0x7) | reg); +} + +static void lpe_init(device_t dev) +{ + setup_codec_clock(dev); } static const struct device_operations device_ops = { -- cgit v1.2.3