From 7e22ac15b298f579cffff67236ee09289ff74137 Mon Sep 17 00:00:00 2001 From: Shon Wang Date: Thu, 7 Apr 2022 16:23:14 +0800 Subject: mb/google/brya/var/vell: Fix camera LED flicker problem Camera LED flicker 3 times or so as sensor is being probed during kernel boot. Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot preventing camera LED flicker. Corrects that by explicitly sequencing the reset GPIO and power GPIO BUG=b:219644184 TEST=Build and boot on vell, observe whether camera LED flickers Change-Id: I846ec4cb5c4527f5664699b31d0d561d390d938c Signed-off-by: Shon Wang Reviewed-on: https://review.coreboot.org/c/coreboot/+/63441 Reviewed-by: Tim Wawrzynczak Tested-by: build bot (Jenkins) --- .../google/brya/variants/vell/overridetree.cb | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/src/mainboard/google/brya/variants/vell/overridetree.cb b/src/mainboard/google/brya/variants/vell/overridetree.cb index a2fe72d239..cd813bf6f8 100644 --- a/src/mainboard/google/brya/variants/vell/overridetree.cb +++ b/src/mainboard/google/brya/variants/vell/overridetree.cb @@ -299,11 +299,12 @@ chip soc/intel/alderlake register "has_power_resource" = "1" register "ssdb.lanes_used" = "4" - register "ssdb.link_used" = "0" + register "ssdb.link_used" = "1" register "num_freq_entries" = "2" register "link_freq[0]" = "360000000" register "link_freq[1]" = "180000000" register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" #Controls register "clk_panel.clks[0].clknum" = "IMGCLKOUT_2" @@ -313,28 +314,27 @@ chip soc/intel/alderlake register "gpio_panel.gpio[1].gpio_num" = "GPP_C4" #power #_ON - register "on_seq.ops_cnt" = "5" + register "on_seq.ops_cnt" = "4" register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" - register "on_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" - register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" #_OFF register "off_seq.ops_cnt" = "3" - register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - register "off_seq.ops[1]" = "SEQ_OPS_CLK_DISABLE(0, 0)" - register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_CLK_DISABLE(0, 0)" device i2c 36 on end end chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" register "acpi_uid" = "1" register "acpi_name" = ""NVM0"" register "chip_name" = ""GT24C08"" register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC"" register "nvm_compat" = ""atmel,24c1024"" register "nvm_size" = "0x2000" -- cgit v1.2.3