From 752ab0d785178869492b4cf90af69d8c9d14aa7b Mon Sep 17 00:00:00 2001 From: Zheng Bao Date: Tue, 18 Jan 2011 09:32:15 +0000 Subject: remove the code which is not ready to release. Signed-off-by: Zheng Bao Acked-by: Zheng Bao git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6263 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/amd/cimx_wrapper/Kconfig | 30 -- src/southbridge/amd/cimx_wrapper/Makefile.inc | 21 - src/southbridge/amd/cimx_wrapper/sb800/Amd.h | 383 ------------------- src/southbridge/amd/cimx_wrapper/sb800/Amdlib.h | 174 --------- src/southbridge/amd/cimx_wrapper/sb800/Kconfig | 27 -- .../amd/cimx_wrapper/sb800/Makefile.inc | 35 -- .../amd/cimx_wrapper/sb800/SBPLATFORM.h | 153 -------- src/southbridge/amd/cimx_wrapper/sb800/SbEarly.h | 36 -- src/southbridge/amd/cimx_wrapper/sb800/bootblock.c | 110 ------ src/southbridge/amd/cimx_wrapper/sb800/cbtypes.h | 54 --- src/southbridge/amd/cimx_wrapper/sb800/cfg.c | 124 ------ src/southbridge/amd/cimx_wrapper/sb800/cfg.h | 234 ------------ src/southbridge/amd/cimx_wrapper/sb800/chip.h | 42 -- src/southbridge/amd/cimx_wrapper/sb800/chip_name.c | 25 -- src/southbridge/amd/cimx_wrapper/sb800/early.c | 61 --- src/southbridge/amd/cimx_wrapper/sb800/late.c | 425 --------------------- src/southbridge/amd/cimx_wrapper/sb800/lpc.c | 171 --------- src/southbridge/amd/cimx_wrapper/sb800/lpc.h | 29 -- src/southbridge/amd/cimx_wrapper/sb800/smbus.c | 249 ------------ src/southbridge/amd/cimx_wrapper/sb800/smbus.h | 79 ---- 20 files changed, 2462 deletions(-) delete mode 100644 src/southbridge/amd/cimx_wrapper/Kconfig delete mode 100644 src/southbridge/amd/cimx_wrapper/Makefile.inc delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/Amd.h delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/Amdlib.h delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/Kconfig delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/Makefile.inc delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/SBPLATFORM.h delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/SbEarly.h delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/bootblock.c delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/cbtypes.h delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/cfg.c delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/cfg.h delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/chip.h delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/chip_name.c delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/early.c delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/late.c delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/lpc.c delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/lpc.h delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/smbus.c delete mode 100644 src/southbridge/amd/cimx_wrapper/sb800/smbus.h diff --git a/src/southbridge/amd/cimx_wrapper/Kconfig b/src/southbridge/amd/cimx_wrapper/Kconfig deleted file mode 100644 index 6dfd5f6c2e..0000000000 --- a/src/southbridge/amd/cimx_wrapper/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2010 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -config SOUTHBRIDGE_AMD_CIMX_WRAPPER - bool - default n - -config SOUTHBRIDGE_AMD_CIMX_WRAPPER_SB800 - bool - select IOAPIC - select SOUTHBRIDGE_AMD_CIMX_WRAPPER - -source src/southbridge/amd/cimx_wrapper/sb800/Kconfig - diff --git a/src/southbridge/amd/cimx_wrapper/Makefile.inc b/src/southbridge/amd/cimx_wrapper/Makefile.inc deleted file mode 100644 index 1d9abf76dd..0000000000 --- a/src/southbridge/amd/cimx_wrapper/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2010 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -subdirs-$(CONFIG_SOUTHBRIDGE_AMD_CIMX_WRAPPER_SB800) += sb800 - diff --git a/src/southbridge/amd/cimx_wrapper/sb800/Amd.h b/src/southbridge/amd/cimx_wrapper/sb800/Amd.h deleted file mode 100644 index 93a6234059..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/Amd.h +++ /dev/null @@ -1,383 +0,0 @@ -/***************************************************************************** - * AMD Generic Encapsulated Software Architecture */ -/** - * @file - * - * Agesa structures and definitions - * - * Contains AMD AGESA/CIMx core interface - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: Include - * @e \$Revision:$ @e \$Date:$ - */ -/* - ***************************************************************************** - * - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * *************************************************************************** - * - */ - -#ifndef _AMD_H_ -#define _AMD_H_ - -// AGESA Types and Definitions - -#ifndef NULL - #define NULL 0 -#endif - -#define LAST_ENTRY 0xFFFFFFFF -#define IOCF8 0xCF8 -#define IOCFC 0xCFC -#define IN -#define OUT - -#ifndef Int16FromChar -#define Int16FromChar(a,b) ((a) << 0 | (b) << 8) -#endif -#ifndef Int32FromChar -#define Int32FromChar(a,b,c,d) ((a) << 0 | (b) << 8 | (c) << 16 | (d) << 24) -#endif - -#define IMAGE_SIGNATURE Int32FromChar ('$', 'A', 'M', 'D') - -typedef UINTN AGESA_STATUS; - -#define AGESA_SUCCESS ((AGESA_STATUS) 0x0) -#define AGESA_ALERT ((AGESA_STATUS) 0x40000000) -#define AGESA_WARNING ((AGESA_STATUS) 0x40000001) -#define AGESA_UNSUPPORTED ((AGESA_STATUS) 0x80000003) -#define AGESA_ERROR ((AGESA_STATUS) 0xC0000001) -#define AGESA_CRITICAL ((AGESA_STATUS) 0xC0000002) -#define AGESA_FATAL ((AGESA_STATUS) 0xC0000003) - -typedef AGESA_STATUS (*CALLOUT_ENTRY) (UINT32 Param1, UINTN Param2, VOID* ConfigPtr); -typedef AGESA_STATUS (*IMAGE_ENTRY) (IN OUT VOID* ConfigPtr); -typedef AGESA_STATUS (*MODULE_ENTRY) (IN OUT VOID* ConfigPtr); - -///This allocation type is used by the AmdCreateStruct entry point -typedef enum { - PreMemHeap = 0, ///< Create heap in cache. - PostMemDram, ///< Create heap in memory. - ByHost ///< Create heap by Host. -} ALLOCATION_METHOD; - -/// These width descriptors are used by the library function, and others, to specify the data size -typedef enum ACCESS_WIDTH { - AccessWidth8 = 1, ///< Access width is 8 bits. - AccessWidth16, ///< Access width is 16 bits. - AccessWidth32, ///< Access width is 32 bits. - AccessWidth64, ///< Access width is 64 bits. - - AccessS3SaveWidth8 = 0x81, ///< Save 8 bits data. - AccessS3SaveWidth16, ///< Save 16 bits data. - AccessS3SaveWidth32, ///< Save 32 bits data. - AccessS3SaveWidth64, ///< Save 64 bits data. -} ACCESS_WIDTH; - -// AGESA Structures - -/// The standard header for all AGESA services. -typedef struct _AMD_CONFIG_PARAMS { - IN UINT32 ImageBasePtr; ///< The AGESA Image base address. - IN UINT32 Func; ///< The service desired, @sa dispatch.h. - IN UINT32 AltImageBasePtr; ///< Alternate Image location - IN UINT32 PcieBasePtr; ///< PCIe MMIO Base address, if configured. - union { ///< Callback pointer - IN UINT64 PlaceHolder; ///< Place holder - IN CALLOUT_ENTRY CalloutPtr; ///< For Callout from AGESA - } CALLBACK; - IN OUT UINT32 Reserved[2]; ///< This space is reserved for future use. -} AMD_CONFIG_PARAMS; - - -/// AGESA Binary module header structure -typedef struct _AMD_IMAGE_HEADER { - IN UINT32 Signature; ///< Binary Signature - IN CHAR8 CreatorID[8]; ///< 8 characters ID - IN CHAR8 Version[12]; ///< 12 characters version - IN UINT32 ModuleInfoOffset; ///< Offset of module - IN UINT32 EntryPointAddress; ///< Entry address - IN UINT32 ImageBase; ///< Image base - IN UINT32 RelocTableOffset; ///< Relocate Table offset - IN UINT32 ImageSize; ///< Size - IN UINT16 Checksum; ///< Checksum - IN UINT8 ImageType; ///< Type - IN UINT8 V_Reserved; ///< Reserved -} AMD_IMAGE_HEADER; - -/// AGESA Binary module header structure -typedef struct _AMD_MODULE_HEADER { - IN UINT32 ModuleHeaderSignature; ///< Module signature - IN CHAR8 ModuleIdentifier[8]; ///< 8 characters ID - IN CHAR8 ModuleVersion[12]; ///< 12 characters version - IN MODULE_ENTRY ModuleDispatcherPtr; ///< A pointer point to dispatcher - IN struct _AMD_MODULE_HEADER *NextBlockPtr; ///< Next module header link -} AMD_MODULE_HEADER; - -#define FUNC_0 0 // bit-placed for PCI address creation -#define FUNC_1 1 -#define FUNC_2 2 -#define FUNC_3 3 -#define FUNC_4 4 -#define FUNC_5 5 -#define FUNC_6 6 -#define FUNC_7 7 - -// SBDFO - Segment Bus Device Function Offset -// 31:28 Segment (4-bits) -// 27:20 Bus (8-bits) -// 19:15 Device (5-bits) -// 14:12 Function (3-bits) -// 11:00 Offset (12-bits) - -#if 0 -#define MAKE_SBDFO(Seg, Bus, Dev, Fun, Off) ((((UINT32) (Seg)) << 28) | (((UINT32) (Bus)) << 20) | \ - (((UINT32) (Dev)) << 15) | (((UINT32) (Fun)) << 12) | ((UINT32) (Off))) -#endif -#define ILLEGAL_SBDFO 0xFFFFFFFF - -/// CPUID data received registers format -typedef struct _SB_CPUID_DATA { - IN OUT UINT32 EAX_Reg; ///< CPUID instruction result in EAX - IN OUT UINT32 EBX_Reg; ///< CPUID instruction result in EBX - IN OUT UINT32 ECX_Reg; ///< CPUID instruction result in ECX - IN OUT UINT32 EDX_Reg; ///< CPUID instruction result in EDX -} SB_CPUID_DATA; - -#define WARM_RESET 1 -#define COLD_RESET 2 // Cold reset -#define RESET_CPU 4 // Triggers a CPU reset - -/// HT frequency for external callbacks -typedef enum { - HT_FREQUENCY_200M = 0, ///< HT speed 200 for external callbacks - HT_FREQUENCY_400M = 2, ///< HT speed 400 for external callbacks - HT_FREQUENCY_600M = 4, ///< HT speed 600 for external callbacks - HT_FREQUENCY_800M = 5, ///< HT speed 800 for external callbacks - HT_FREQUENCY_1000M = 6, ///< HT speed 1000 for external callbacks - HT_FREQUENCY_1200M = 7, ///< HT speed 1200 for external callbacks - HT_FREQUENCY_1400M = 8, ///< HT speed 1400 for external callbacks - HT_FREQUENCY_1600M = 9, ///< HT speed 1600 for external callbacks - HT_FREQUENCY_1800M = 10, ///< HT speed 1800 for external callbacks - HT_FREQUENCY_2000M = 11, ///< HT speed 2000 for external callbacks - HT_FREQUENCY_2200M = 12, ///< HT speed 2200 for external callbacks - HT_FREQUENCY_2400M = 13, ///< HT speed 2400 for external callbacks - HT_FREQUENCY_2600M = 14, ///< HT speed 2600 for external callbacks - HT_FREQUENCY_2800M = 17, ///< HT speed 2800 for external callbacks - HT_FREQUENCY_3000M = 18, ///< HT speed 3000 for external callbacks - HT_FREQUENCY_3200M = 19 ///< HT speed 3200 for external callbacks -} HT_FREQUENCIES; - -#ifndef BIT0 - #define BIT0 0x0000000000000001ull -#endif -#ifndef BIT1 - #define BIT1 0x0000000000000002ull -#endif -#ifndef BIT2 - #define BIT2 0x0000000000000004ull -#endif -#ifndef BIT3 - #define BIT3 0x0000000000000008ull -#endif -#ifndef BIT4 - #define BIT4 0x0000000000000010ull -#endif -#ifndef BIT5 - #define BIT5 0x0000000000000020ull -#endif -#ifndef BIT6 - #define BIT6 0x0000000000000040ull -#endif -#ifndef BIT7 - #define BIT7 0x0000000000000080ull -#endif -#ifndef BIT8 - #define BIT8 0x0000000000000100ull -#endif -#ifndef BIT9 - #define BIT9 0x0000000000000200ull -#endif -#ifndef BIT10 - #define BIT10 0x0000000000000400ull -#endif -#ifndef BIT11 - #define BIT11 0x0000000000000800ull -#endif -#ifndef BIT12 - #define BIT12 0x0000000000001000ull -#endif -#ifndef BIT13 - #define BIT13 0x0000000000002000ull -#endif -#ifndef BIT14 - #define BIT14 0x0000000000004000ull -#endif -#ifndef BIT15 - #define BIT15 0x0000000000008000ull -#endif -#ifndef BIT16 - #define BIT16 0x0000000000010000ull -#endif -#ifndef BIT17 - #define BIT17 0x0000000000020000ull -#endif -#ifndef BIT18 - #define BIT18 0x0000000000040000ull -#endif -#ifndef BIT19 - #define BIT19 0x0000000000080000ull -#endif -#ifndef BIT20 - #define BIT20 0x0000000000100000ull -#endif -#ifndef BIT21 - #define BIT21 0x0000000000200000ull -#endif -#ifndef BIT22 - #define BIT22 0x0000000000400000ull -#endif -#ifndef BIT23 - #define BIT23 0x0000000000800000ull -#endif -#ifndef BIT24 - #define BIT24 0x0000000001000000ull -#endif -#ifndef BIT25 - #define BIT25 0x0000000002000000ull -#endif -#ifndef BIT26 - #define BIT26 0x0000000004000000ull -#endif -#ifndef BIT27 - #define BIT27 0x0000000008000000ull -#endif -#ifndef BIT28 - #define BIT28 0x0000000010000000ull -#endif -#ifndef BIT29 - #define BIT29 0x0000000020000000ull -#endif -#ifndef BIT30 - #define BIT30 0x0000000040000000ull -#endif -#ifndef BIT31 - #define BIT31 0x0000000080000000ull -#endif -#ifndef BIT32 - #define BIT32 0x0000000100000000ull -#endif -#ifndef BIT33 - #define BIT33 0x0000000200000000ull -#endif -#ifndef BIT34 - #define BIT34 0x0000000400000000ull -#endif -#ifndef BIT35 - #define BIT35 0x0000000800000000ull -#endif -#ifndef BIT36 - #define BIT36 0x0000001000000000ull -#endif -#ifndef BIT37 - #define BIT37 0x0000002000000000ull -#endif -#ifndef BIT38 - #define BIT38 0x0000004000000000ull -#endif -#ifndef BIT39 - #define BIT39 0x0000008000000000ull -#endif -#ifndef BIT40 - #define BIT40 0x0000010000000000ull -#endif -#ifndef BIT41 - #define BIT41 0x0000020000000000ull -#endif -#ifndef BIT42 - #define BIT42 0x0000040000000000ull -#endif -#ifndef BIT43 - #define BIT43 0x0000080000000000ull -#endif -#ifndef BIT44 - #define BIT44 0x0000100000000000ull -#endif -#ifndef BIT45 - #define BIT45 0x0000200000000000ull -#endif -#ifndef BIT46 - #define BIT46 0x0000400000000000ull -#endif -#ifndef BIT47 - #define BIT47 0x0000800000000000ull -#endif -#ifndef BIT48 - #define BIT48 0x0001000000000000ull -#endif -#ifndef BIT49 - #define BIT49 0x0002000000000000ull -#endif -#ifndef BIT50 - #define BIT50 0x0004000000000000ull -#endif -#ifndef BIT51 - #define BIT51 0x0008000000000000ull -#endif -#ifndef BIT52 - #define BIT52 0x0010000000000000ull -#endif -#ifndef BIT53 - #define BIT53 0x0020000000000000ull -#endif -#ifndef BIT54 - #define BIT54 0x0040000000000000ull -#endif -#ifndef BIT55 - #define BIT55 0x0080000000000000ull -#endif -#ifndef BIT56 - #define BIT56 0x0100000000000000ull -#endif -#ifndef BIT57 - #define BIT57 0x0200000000000000ull -#endif -#ifndef BIT58 - #define BIT58 0x0400000000000000ull -#endif -#ifndef BIT59 - #define BIT59 0x0800000000000000ull -#endif -#ifndef BIT60 - #define BIT60 0x1000000000000000ull -#endif -#ifndef BIT61 - #define BIT61 0x2000000000000000ull -#endif -#ifndef BIT62 - #define BIT62 0x4000000000000000ull -#endif -#ifndef BIT63 - #define BIT63 0x8000000000000000ull -#endif - -#endif diff --git a/src/southbridge/amd/cimx_wrapper/sb800/Amdlib.h b/src/southbridge/amd/cimx_wrapper/sb800/Amdlib.h deleted file mode 100644 index e8b94303cb..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/Amdlib.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - ***************************************************************************** - * - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * *************************************************************************** - * - */ - -#ifndef _AMD_SB_LIB_H_ -#define _AMD_SB_LIB_H_ - -typedef CHAR8 *va_list; -#ifndef _INTSIZEOF - #define _INTSIZEOF (n) ( (sizeof (n) + sizeof (UINTN) - 1) & ~(sizeof (UINTN) - 1) ) -#endif - -// Also support coding convention rules for var arg macros -#ifndef va_start - #define va_start(ap, v) ( ap = (va_list)&(v) + _INTSIZEOF (v) ) -#endif -#define va_arg(ap, t) ( *(t *) ((ap += _INTSIZEOF (t)) - _INTSIZEOF (t)) ) -#define va_end(ap) ( ap = (va_list)0 ) - -#pragma pack (push, 1) - -#define IMAGE_ALIGN 32*1024 -#define NUM_IMAGE_LOCATION 32 - -//Entry Point Call -typedef void (*CIM_IMAGE_ENTRY) (void* pConfig); - -//Hook Call - -typedef struct _CIMFILEHEADER -{ - UINT32 AMDLogo; - UINT64 CreatorID; - UINT32 Version1; - UINT32 Version2; - UINT32 Version3; - UINT32 ModuleInfoOffset; - UINT32 EntryPoint; - UINT32 ImageBase; - UINT32 RelocTableOffset; - UINT32 ImageSize; - UINT16 CheckSum; - UINT8 ImageType; - UINT8 Reserved2; -} CIMFILEHEADER; - -#ifndef BIT0 - #define BIT0 (1 << 0) -#endif -#ifndef BIT1 - #define BIT1 (1 << 1) -#endif -#ifndef BIT2 - #define BIT2 (1 << 2) -#endif -#ifndef BIT3 - #define BIT3 (1 << 3) -#endif -#ifndef BIT4 - #define BIT4 (1 << 4) -#endif -#ifndef BIT5 - #define BIT5 (1 << 5) -#endif -#ifndef BIT6 - #define BIT6 (1 << 6) -#endif -#ifndef BIT7 - #define BIT7 (1 << 7) -#endif -#ifndef BIT8 - #define BIT8 (1 << 8) -#endif -#ifndef BIT9 - #define BIT9 (1 << 9) -#endif -#ifndef BIT10 - #define BIT10 (1 << 10) -#endif -#ifndef BIT11 - #define BIT11 (1 << 11) -#endif -#ifndef BIT12 - #define BIT12 (1 << 12) -#endif -#ifndef BIT13 - #define BIT13 (1 << 13) -#endif -#ifndef BIT14 - #define BIT14 (1 << 14) -#endif -#ifndef BIT15 - #define BIT15 (1 << 15) -#endif -#ifndef BIT16 - #define BIT16 (1 << 16) -#endif -#ifndef BIT17 - #define BIT17 (1 << 17) -#endif -#ifndef BIT18 - #define BIT18 (1 << 18) -#endif -#ifndef BIT19 - #define BIT19 (1 << 19) -#endif -#ifndef BIT20 - #define BIT20 (1 << 20) -#endif -#ifndef BIT21 - #define BIT21 (1 << 21) -#endif -#ifndef BIT22 - #define BIT22 (1 << 22) -#endif -#ifndef BIT23 - #define BIT23 (1 << 23) -#endif -#ifndef BIT24 - #define BIT24 (1 << 24) -#endif -#ifndef BIT25 - #define BIT25 (1 << 25) -#endif -#ifndef BIT26 - #define BIT26 (1 << 26) -#endif -#ifndef BIT27 - #define BIT27 (1 << 27) -#endif -#ifndef BIT28 - #define BIT28 (1 << 28) -#endif -#ifndef BIT29 - #define BIT29 (1 << 29) -#endif -#ifndef BIT30 - #define BIT30 (1 << 30) -#endif -#ifndef BIT31 - #define BIT31 (1 << 31) -#endif - -#pragma pack (pop) - -typedef enum -{ - AccWidthUint8 = 0, - AccWidthUint16, - AccWidthUint32, -} ACC_WIDTH; - -#define S3_SAVE 0x80 - -#endif diff --git a/src/southbridge/amd/cimx_wrapper/sb800/Kconfig b/src/southbridge/amd/cimx_wrapper/sb800/Kconfig deleted file mode 100644 index 8b9ddf820e..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -if SOUTHBRIDGE_AMD_CIMX_WRAPPER_SB800 - -config BOOTBLOCK_SOUTHBRIDGE_INIT - string - default "southbridge/amd/cimx_wrapper/sb800/bootblock.c" - -endif - diff --git a/src/southbridge/amd/cimx_wrapper/sb800/Makefile.inc b/src/southbridge/amd/cimx_wrapper/sb800/Makefile.inc deleted file mode 100644 index c48234d1f5..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/Makefile.inc +++ /dev/null @@ -1,35 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2010 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -# - -subdirs-y += ../../../../../src/vendorcode/amd/cimx/sb800 -#TODO: merge with agesa lib function -subdirs-y += ../../../../../src/vendorcode/amd/cimx/lib - -# SB800 Platform Files - -romstage-y += cfg.c -romstage-y += early.c -romstage-y += smbus.c - -ramstage-y += cfg.c -ramstage-y += late.c - -driver-y += smbus.c -driver-y += lpc.c - diff --git a/src/southbridge/amd/cimx_wrapper/sb800/SBPLATFORM.h b/src/southbridge/amd/cimx_wrapper/sb800/SBPLATFORM.h deleted file mode 100644 index 9127dbee5f..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/SBPLATFORM.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - ***************************************************************************** - * - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * *************************************************************************** - * - */ - -#ifndef _AMD_SBPLATFORM_H_ -#define _AMD_SBPLATFORM_H_ - -#include -typedef UINT64 PLACEHOLDER; -#include -#include -#include //TODO merge with agesa wrapper -#include -#include -#include -#include -#include -#include -#include - -#ifdef NULL - #undef NULL -#endif -#define NULL 0 - -#ifndef SBOEM_ACPI_RESTORE_SWSMI - #define SBOEM_BEFORE_PCI_RESTORE_SWSMI 0xD3 - #define SBOEM_AFTER_PCI_RESTORE_SWSMI 0xD4 -#endif - -#ifndef _AMD_NB_CIM_X_PROTOCOL_H_ - -/// Extended PCI Address -typedef struct _EXT_PCI_ADDR { - UINT32 Reg :16; ///< / PCI Register - UINT32 Func:3; ///< / PCI Function - UINT32 Dev :5; ///< / PCI Device - UINT32 Bus :8; ///< / PCI Address -} EXT_PCI_ADDR; - -/// PCI Address -typedef union _PCI_ADDR { - UINT32 ADDR; ///< / 32 bit Address - EXT_PCI_ADDR Addr; ///< / Extended PCI Address -} PCI_ADDR; -#endif - -#define FIXUP_PTR(ptr) ptr - -//------------------------------------------------------------------------------------------------------------------------// -/** - * SB_CIMx_PARAMETER 0 1 2 Defult Value When CIMx Take over - * SpreadSpectrum CIMx take over User (Setup Option) User (Setup Option) Enable - * SpreadSpectrumType CIMx take over User (Setup Option) User (Setup Option) Normal - * HpetTimer CIMx take over User (Setup Option) User (Setup Option) Enable - * HpetMsiDis CIMx take over User (Setup Option) User (Setup Option) Enable (0x00) - * IrConfig CIMx take over User (Setup Option) User (Setup Option) Disable (0x00) - * SpiFastReadEnable CIMx take over User (Setup Option) User (Setup Option) Disable - * SpiFastReadSpeed CIMx take over User (Setup Option) User (Setup Option) Disable (NULL) - * NbSbGen2 CIMx take over User (Setup Option) User (Setup Option) Enable - * AlinkPhyPllPowerDown CIMx take over User (Setup Option) User (Setup Option) Enable - * ResetCpuOnSyncFlood CIMx take over User (Setup Option) User (Setup Option) Enable - * GppGen2 CIMx take over User (Setup Option) User (Setup Option) Disable - * GppMemWrImprove CIMx take over User (Setup Option) User (Setup Option) Enable - * GppPortAspm CIMx take over User (Setup Option) User (Setup Option) Disable - * GppLaneReversal CIMx take over User (Setup Option) User (Setup Option) Disable - * GppPhyPllPowerDown CIMx take over User (Setup Option) User (Setup Option) Enable - * UsbPhyPowerDown CIMx take over User (Setup Option) User (Setup Option) Disable - * SBGecDebugBus CIMx take over User (Setup Option) User (Setup Option) Disable - * SBGecPwr CIMx take over User (Setup Option) User (Setup Option) Nerver Power down (0x11) - * SataSetMaxGen2 CIMx take over User (Setup Option) User (Setup Option) Max Gen3 (0x00) - * SataClkMode CIMx take over User (Setup Option) User (Setup Option) 0x90 int. 100Mhz - * SataAggrLinkPmCap CIMx take over User (Setup Option) User (Setup Option) Enable - * SataPortMultCap CIMx take over User (Setup Option) User (Setup Option) Enable - * SataPscCap CIMx take over User (Setup Option) User (Setup Option) Enable (0x00) - * SataSscCap CIMx take over User (Setup Option) User (Setup Option) Enable (0x00) - * SataFisBasedSwitching CIMx take over User (Setup Option) User (Setup Option) Disable - * SataCccSupport CIMx take over User (Setup Option) User (Setup Option) Disable - * SataMsiCapability CIMx take over User (Setup Option) User (Setup Option) Enable - * SataClkAutoOff CIMx take over User (Setup Option) User (Setup Option) Disable - * AcDcMsg CIMx take over User (Setup Option) User (Setup Option) Disable - * TimerTickTrack CIMx take over User (Setup Option) User (Setup Option) Disable - * ClockInterruptTag CIMx take over User (Setup Option) User (Setup Option) Disable - * OhciTrafficHanding CIMx take over User (Setup Option) User (Setup Option) Disable - * EhciTrafficHanding CIMx take over User (Setup Option) User (Setup Option) Disable - * FusionMsgCMultiCore CIMx take over User (Setup Option) User (Setup Option) Disable - * FusionMsgCStage CIMx take over User (Setup Option) User (Setup Option) Disable - */ -#define SB_CIMx_PARAMETER 0x02 - -// Generic -#define cimSpreadSpectrumDefault TRUE -#define cimSpreadSpectrumTypeDefault 0x00 // Normal -#define cimHpetTimerDefault TRUE -#define cimHpetMsiDisDefault FALSE // Enable -#define cimIrConfigDefault 0x00 // Disable -#define cimSpiFastReadEnableDefault 0x00 // Disable -#define cimSpiFastReadSpeedDefault 0x00 // NULL -// GPP/AB Controller -#define cimNbSbGen2Default TRUE -#define cimAlinkPhyPllPowerDownDefault TRUE -#define cimResetCpuOnSyncFloodDefault TRUE -#define cimGppGen2Default FALSE -#define cimGppMemWrImproveDefault TRUE -#define cimGppPortAspmDefault FALSE -#define cimGppLaneReversalDefault FALSE -#define cimGppPhyPllPowerDownDefault TRUE -// USB Controller -#define cimUsbPhyPowerDownDefault FALSE -// GEC Controller -#define cimSBGecDebugBusDefault FALSE -#define cimSBGecPwrDefault 0x03 -// Sata Controller -#define cimSataSetMaxGen2Default 0x00 -#define cimSATARefClkSelDefault 0x10 -#define cimSATARefDivSelDefault 0x80 -#define cimSataAggrLinkPmCapDefault TRUE -#define cimSataPortMultCapDefault TRUE -#define cimSataPscCapDefault 0x00 // Enable -#define cimSataSscCapDefault 0x00 // Enable -#define cimSataFisBasedSwitchingDefault FALSE -#define cimSataCccSupportDefault FALSE -#define cimSataClkAutoOffDefault FALSE -#define cimNativepciesupportDefault FALSE -// Fusion Related -#define cimAcDcMsgDefault FALSE -#define cimTimerTickTrackDefault FALSE -#define cimClockInterruptTagDefault FALSE -#define cimOhciTrafficHandingDefault FALSE -#define cimEhciTrafficHandingDefault FALSE -#define cimFusionMsgCMultiCoreDefault FALSE -#define cimFusionMsgCStageDefault FALSE - -#endif // _AMD_SBPLATFORM_H_ diff --git a/src/southbridge/amd/cimx_wrapper/sb800/SbEarly.h b/src/southbridge/amd/cimx_wrapper/sb800/SbEarly.h deleted file mode 100644 index 706d9153cd..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/SbEarly.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _CIMX_SB_EARLY_H_ -#define _CIMX_SB_EARLY_H_ - -/** - * @brief Get SouthBridge device number, called by finalize_node_setup() - * @param[in] bus target bus number - * @return southbridge device number - */ -u32 get_sbdn(u32 bus); - -/** - * South Bridge CIMx romstage entry, sbPowerOnInit entry point wrapper. - */ -void sb_poweron_init(void); -//void sb_before_pci_init(void); - -#endif diff --git a/src/southbridge/amd/cimx_wrapper/sb800/bootblock.c b/src/southbridge/amd/cimx_wrapper/sb800/bootblock.c deleted file mode 100644 index a29bf8c3f5..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/bootblock.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include - -#if CONFIG_SERIAL_POST == 1 - -/* Data */ -#define UART_RBR 0x00 -#define UART_TBR 0x00 - -/* Control */ -#define UART_IER 0x01 -#define UART_IIR 0x02 -#define UART_FCR 0x02 -#define UART_LCR 0x03 -#define UART_MCR 0x04 -#define UART_DLL 0x00 -#define UART_DLM 0x01 - -/* Status */ -#define UART_LSR 0x05 -#define UART_MSR 0x06 -#define UART_SCR 0x07 - -#ifndef CONFIG_TTYS0_DIV -#if ((115200%CONFIG_TTYS0_BAUD) != 0) -#error Bad ttys0 baud rate -#endif -#define CONFIG_TTYS0_DIV (115200/CONFIG_TTYS0_BAUD) -#endif // CONFIG_TTYS0_DIV - -#define UART_LCS CONFIG_TTYS0_LCS - -#endif // CONFIG_SERIAL_POST == 1 - -static void sb800_enable_rom(void) -{ - u32 word; - u32 dword; - device_t dev; - - dev = PCI_DEV(0, 0x14, 0x03); - /* SB800 LPC Bridge 0:20:3:44h. - * BIT6: Port Enable for serial port 0x3f8-0x3ff - * BIT29: Port Enable for KBC port 0x60 and 0x64 - * BIT30: Port Enable for ACPI Micro-Controller port 0x66 and 0x62 - */ - dword = pci_io_read_config32(dev, 0x44); - //dword |= (1<<6) | (1<<29) | (1<<30) ; - /*Turn on all of LPC IO Port decode enable */ - dword = 0xffffffff; - pci_io_write_config32(dev, 0x44, dword); - - /* SB800 LPC Bridge 0:20:3:48h. - * BIT0: Port Enable for SuperIO 0x2E-0x2F - * BIT1: Port Enable for SuperIO 0x4E-0x4F - * BIT4: Port Enable for LPC ROM Address Arrage2 (0x68-0x6C) - * BIT6: Port Enable for RTC IO 0x70-0x73 - * BIT21: Port Enable for Port 0x80 - */ - dword = pci_io_read_config32(dev, 0x48); - dword |= (1<<0) | (1<<1) | (1<<4) | (1<<6) | (1<<21) ; - pci_io_write_config32(dev, 0x48, dword); - - /* Enable 2MB rom access at 0xFFE00000 - 0xFFFFFFFF */ - /* Set the 2MB enable bits */ - word = pci_io_read_config16(dev, 0x6c); - word = 0xFFE0; - pci_io_write_config16(dev, 0x6c, word); -} - -static void uart_init(void) -{ -#if CONFIG_SERIAL_POST == 1 - /* disable interrupts */ - outb(0x0, CONFIG_TTYS0_BASE + UART_IER); - /* enable fifo's */ - outb(0x01, CONFIG_TTYS0_BASE + UART_FCR); - /* Set Baud Rate Divisor to 12 ==> 115200 Baud */ - outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR); - outb(CONFIG_TTYS0_DIV & 0xFF, CONFIG_TTYS0_BASE + UART_DLL); - outb((CONFIG_TTYS0_DIV >> 8) & 0xFF, CONFIG_TTYS0_BASE + UART_DLM); - outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR); -#endif // CONFIG_SERIAL_POST == 1 -} - -static void bootblock_southbridge_init(void) -{ - /* Setup the rom access for 2M */ - sb800_enable_rom(); - uart_init(); -} diff --git a/src/southbridge/amd/cimx_wrapper/sb800/cbtypes.h b/src/southbridge/amd/cimx_wrapper/sb800/cbtypes.h deleted file mode 100644 index 2d765f8d68..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/cbtypes.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _CBTYPES_H_ -#define _CBTYPES_H_ - -//#include - -typedef signed long long __int64; -typedef void VOID; -typedef unsigned int UINTN; -typedef signed char CHAR8; -typedef unsigned char UINT8; -typedef unsigned short UINT16; -typedef unsigned int UINT32; -typedef unsigned long long UINT64; - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif -typedef unsigned char BOOLEAN; - -#ifndef VOLATILE -#define VOLATILE volatile -#endif - -#ifndef IN -#define IN -#endif -#ifndef OUT -#define OUT -#endif - -#endif diff --git a/src/southbridge/amd/cimx_wrapper/sb800/cfg.c b/src/southbridge/amd/cimx_wrapper/sb800/cfg.c deleted file mode 100644 index 64fb0ff115..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/cfg.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include - -/** - * @brief South Bridge CIMx configuration - * - * should be called before exeucte CIMx function. - * this function will be called in romstage and ramstage. - */ -void sb800_cimx_config(AMDSBCFG *sb_config) -{ - if (!sb_config) { - return; - } - //memset(sb_config, 0, sizeof(AMDSBCFG)); - - /* header */ - sb_config->StdHeader.PcieBasePtr = PCIEX_BASE_ADDRESS; - - /* static Build Parameters */ - sb_config->BuildParameters.BiosSize = BIOS_SIZE; - sb_config->BuildParameters.LegacyFree = LEGACY_FREE; - sb_config->BuildParameters.WatchDogTimerBase = WATCHDOG_TIMER_BASE_ADDRESS; - sb_config->BuildParameters.AcpiGpe0BlkAddr = GPE0_BLK_ADDRESS; - sb_config->BuildParameters.CpuControlBlkAddr = CPU_CNT_BLK_ADDRESS; - sb_config->BuildParameters.AcpiPmTmrBlkAddr = PM1_TMR_BLK_ADDRESS; - sb_config->BuildParameters.AcpiPm1CntBlkAddr = PM1_CNT_BLK_ADDRESS; - sb_config->BuildParameters.AcpiPm1EvtBlkAddr = PM1_EVT_BLK_ADDRESS; - sb_config->BuildParameters.SioPmeBaseAddress = SIO_PME_BASE_ADDRESS; - sb_config->BuildParameters.SpiRomBaseAddress = SPI_BASE_ADDRESS; - sb_config->BuildParameters.GecShadowRomBase = GEC_BASE_ADDRESS; - sb_config->BuildParameters.Smbus0BaseAddress = SMBUS0_BASE_ADDRESS; - sb_config->BuildParameters.Smbus1BaseAddress = SMBUS1_BASE_ADDRESS; - sb_config->BuildParameters.SataIDESsid = SATA_IDE_MODE_SSID; - sb_config->BuildParameters.SataRAIDSsid = SATA_RAID_MODE_SSID; - sb_config->BuildParameters.SataRAID5Ssid = SATA_RAID5_MODE_SSID; - sb_config->BuildParameters.SataAHCISsid = SATA_AHCI_SSID; - sb_config->BuildParameters.OhciSsid = OHCI_SSID; - sb_config->BuildParameters.EhciSsid = EHCI_SSID; - sb_config->BuildParameters.Ohci4Ssid = OHCI4_SSID; - sb_config->BuildParameters.SmbusSsid = SMBUS_SSID; - sb_config->BuildParameters.IdeSsid = IDE_SSID; - sb_config->BuildParameters.AzaliaSsid = AZALIA_SSID; - sb_config->BuildParameters.LpcSsid = LPC_SSID; - sb_config->BuildParameters.PCIBSsid = PCIB_SSID; - sb_config->BuildParameters.SpreadSpectrumType = Spread_Spectrum_Type; - sb_config->BuildParameters.HpetBase = HPET_BASE_ADDRESS; - - /* General */ - sb_config->SpreadSpectrum = SPREAD_SPECTRUM; - sb_config->PciClks = PCI_CLOCK_CTRL; - sb_config->HpetTimer = HPET_TIMER; - - /* USB */ - sb_config->USBMODE.UsbModeReg = USB_CINFIG; - sb_config->SbUsbPll = 0; - - /* SATA */ - sb_config->SataClass = SATA_MODE; - sb_config->SataIdeMode = SATA_IDE_MODE; - sb_config->SataPortMultCap = SATA_PORT_MULT_CAP_RESERVED; - sb_config->SATAMODE.SataMode.SataController = SATA_CONTROLLER; - sb_config->SATAMODE.SataMode.SataIdeCombMdPriSecOpt = 0; //0 -IDE as primary, 1 -IDE as secondary. - //TODO: set to secondary not take effect. - sb_config->SATAMODE.SataMode.SataIdeCombinedMode = 0; //IDE controlor exposed and combined mode enabled - sb_config->SATAMODE.SataMode.SATARefClkSel = SATA_CLOCK_SOURCE; - - /* Azalia HDA */ - sb_config->AzaliaController = AZALIA_CONTROLLER; - sb_config->AzaliaPinCfg = AZALIA_PIN_CONFIG; - sb_config->AZALIACONFIG.AzaliaSdinPin = AZALIA_SDIN_PIN; - sb_config->AZOEMTBL.pAzaliaOemCodecTablePtr = NULL; - - /* - * GPP. default configure only enable port0 with 4 lanes, - * configure in devicetree.cb would overwrite the default configuration - */ - sb_config->GppFunctionEnable = GPP_CONTROLLER; - sb_config->GppLinkConfig = GPP_CFGMODE; - //sb_config->PORTCONFIG[0].PortCfg.PortHotPlug = TRUE; - sb_config->PORTCONFIG[0].PortCfg.PortPresent = ENABLED; - sb_config->PORTCONFIG[1].PortCfg.PortPresent = ENABLED; - sb_config->PORTCONFIG[2].PortCfg.PortPresent = ENABLED; - sb_config->PORTCONFIG[3].PortCfg.PortPresent = ENABLED; - sb_config->GppUnhidePorts = TRUE; //visable always, even port empty - //sb_config->NbSbGen2 = TRUE; - //sb_config->GppGen2 = TRUE; - - //cimx BTS fix - sb_config->GppMemWrImprove = TRUE; - sb_config->SbPcieOrderRule = TRUE; - sb_config->AlinkPhyPllPowerDown = TRUE; - sb_config->GppPhyPllPowerDown = TRUE; //GPP power saving - sb_config->SBGecPwr = 0x03;//11b << 5, rpr BDF: 00:20:06, PLATFORM.H default define 0x11 was wrong - sb_config->GecConfig = 0; //ENABLE GEC controller - -#ifndef __PRE_RAM__ - /* ramstage cimx config here */ - if (!sb_config->StdHeader.CALLBACK.CalloutPtr) { - sb_config->StdHeader.CALLBACK.CalloutPtr = sb800_callout_entry; - } - - //sb_config-> -#endif //!__PRE_RAM__ -} diff --git a/src/southbridge/amd/cimx_wrapper/sb800/cfg.h b/src/southbridge/amd/cimx_wrapper/sb800/cfg.h deleted file mode 100644 index 9fae525cb9..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/cfg.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _SB800_CFG_H_ -#define _SB800_CFG_H_ - -#include - -/** - * @def BIOS_SIZE_1M - * @def BIOS_SIZE_2M - * @def BIOS_SIZE_4M - * @def BIOS_SIZE_8M - */ -#define BIOS_SIZE_1M 0 -#define BIOS_SIZE_2M 1 -#define BIOS_SIZE_4M 3 -#define BIOS_SIZE_8M 7 - -/* In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 - #define BIOS_SIZE BIOS_SIZE_1M -#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 - #define BIOS_SIZE BIOS_SIZE_2M -#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1 - #define BIOS_SIZE BIOS_SIZE_4M -#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1 - #define BIOS_SIZE BIOS_SIZE_8M -#endif -#endif - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @breif - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CINFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @breif bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @breif INCHIP Sata Controller - */ -#ifndef SATA_CONTROLLER - #define SATA_CONTROLLER ENABLED -#endif - -/** - * @def SATA_MODE - * @breif INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#ifndef SATA_MODE - #define SATA_MODE NATIVE_IDE_MODE -#endif - -/** - * @breif INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @breif INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#ifndef SATA_IDE_MODE - #define SATA_IDE_MODE IDE_LEGACY_MODE -#endif - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @breif INCHIP HDA controller - */ -#ifndef AZALIA_CONTROLLER - #define AZALIA_CONTROLLER AZALIA_AUTO -#endif - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#ifndef AZALIA_PIN_CONFIG - #define AZALIA_PIN_CONFIG 1 -#endif - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -#ifndef AZALIA_SDIN_PIN - //#define AZALIA_SDIN_PIN 0xAA - #define AZALIA_SDIN_PIN 0x2A -#endif - -/** - * @def GPP_CONTROLLER - */ -#ifndef GPP_CONTROLLER - #define GPP_CONTROLLER ENABLED -#endif - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#ifndef GPP_CFGMODE - #define GPP_CFGMODE GPP_CFGMODE_X1111 -#endif - -/** - * @brief South Bridge CIMx configuration - */ -void sb800_cimx_config(AMDSBCFG *sb_cfg); - -/** - * @brief Entry point of Southbridge CIMx callout - * - * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig) - * - * @param[in] func Southbridge CIMx Function ID. - * @param[in] data Southbridge Input Data. - * @param[in] sb_cfg Southbridge configuration structure pointer. - */ -u32 sb800_callout_entry(u32 func, u32 data, void* sb_cfg); - -#endif diff --git a/src/southbridge/amd/cimx_wrapper/sb800/chip.h b/src/southbridge/amd/cimx_wrapper/sb800/chip.h deleted file mode 100644 index 295c46126b..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/chip.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _CIMX_WRAPPER_SB800_CHIP_H_ -#define _CIMX_WRAPPER_SB800_CHIP_H_ - -extern struct chip_operations southbridge_amd_cimx_wrapper_sb800_ops; - -/* - * configuration set in mainboard/devicetree.cb - * boot_switch_sata_ide: - * 0 -set SATA as primary, PATA(IDE) as secondary. - * 1 -set PATA(IDE) as primary, SATA as secondary. if you want to boot from IDE, - * gpp_configuration - The configuration of General Purpose Port A/B/C/D - * 0(GPP_CFGMODE_X4000) -PortA Lanes[3:0] - * 2(GPP_CFGMODE_X2200) -PortA Lanes[1:0], PortB Lanes[3:2] - * 3(GPP_CFGMODE_X2110) -PortA Lanes[1:0], PortB Lane2, PortC Lane3 - * 4(GPP_CFGMODE_X1111) -PortA Lanes0, PortB Lane1, PortC Lane2, PortD Lane3 - */ -struct southbridge_amd_cimx_wrapper_sb800_config -{ - u32 boot_switch_sata_ide : 1; - u8 gpp_configuration; -}; - -#endif /* _CIMX_WRAPPER_SB800_CHIP_H_ */ diff --git a/src/southbridge/amd/cimx_wrapper/sb800/chip_name.c b/src/southbridge/amd/cimx_wrapper/sb800/chip_name.c deleted file mode 100644 index 817f49fb09..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/chip_name.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include "chip.h" - -struct chip_operations southbridge_amd_cimx_wrapper_sb800_ops = { - CHIP_NAME("AMD SB800 Southbridge") -}; diff --git a/src/southbridge/amd/cimx_wrapper/sb800/early.c b/src/southbridge/amd/cimx_wrapper/sb800/early.c deleted file mode 100644 index a97bdb3253..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/early.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -//#include -#include -#include -#include -#include -#include -#include -#include - -/** - * @brief Get SouthBridge device number - * @param[in] bus target bus number - * @return southbridge device number - */ -u32 get_sbdn(u32 bus) -{ - device_t dev; - - //dev = PCI_DEV(bus, 0x14, 0); - dev = pci_locate_device_on_bus( - PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB800_SM), - bus); - - return (dev >> 15) & 0x1f; -} - -/** - * @brief South Bridge CIMx romstage entry, - * wrapper of sbPowerOnInit entry point. - */ -void sb_poweron_init(void) -{ - AMDSBCFG sb_early_cfg; - - sb800_cimx_config(&sb_early_cfg); - //sb_early_cfg.StdHeader.Func = SB_POWERON_INIT; - //AmdSbDispatcher(&sb_early_cfg); - //TODO - //AMD_IMAGE_HEADER was missing, when using AmdSbDispatcher, - // VerifyImage() will fail, LocateImage() take minitues to find the image. - sbPowerOnInit(&sb_early_cfg); -} diff --git a/src/southbridge/amd/cimx_wrapper/sb800/late.c b/src/southbridge/amd/cimx_wrapper/sb800/late.c deleted file mode 100644 index 1df3edcc09..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/late.c +++ /dev/null @@ -1,425 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "chip.h" - -/*implement in mainboard.c*/ -//void set_pcie_assert(void); -//void set_pcie_deassert(void); -void set_pcie_reset(void); -void set_pcie_dereset(void); - -#ifndef _RAMSTAGE_ -#define _RAMSTAGE_ -#endif - -static AMDSBCFG sb_late_cfg; //global, init in sb800_cimx_config -static AMDSBCFG *sb_config = &sb_late_cfg; - -/** - * @brief Entry point of Southbridge CIMx callout - * - * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig) - * - * @param[in] func Southbridge CIMx Function ID. - * @param[in] data Southbridge Input Data. - * @param[in] sb_config Southbridge configuration structure pointer. - * - */ -u32 sb800_callout_entry(u32 func, u32 data, void* config) -{ - u32 ret = 0; - - switch (func) { - case CB_SBGPP_RESET_ASSERT: - //set_pcie_assert(); - set_pcie_reset(); - break; - - case CB_SBGPP_RESET_DEASSERT: - //set_pcie_deassert(); - set_pcie_dereset(); - break; - - case IMC_FIRMWARE_FAIL: - break; - - default: - break; - } - - return ret; -} - -static struct pci_operations lops_pci = { - .set_subsystem = 0, -}; - -static void lpc_enable_resources(device_t dev) -{ - pci_dev_enable_resources(dev); - //lpc_enable_childrens_resources(dev); -} - -static void lpc_init(device_t dev) -{ - /* SB Configure HPET base and enable bit */ - hpetInit(sb_config, &(sb_config->BuildParameters)); -} - -static struct device_operations lpc_ops = { - .read_resources = lpc_read_resources, - .set_resources = lpc_set_resources, - .enable_resources = lpc_enable_resources, - .init = lpc_init, - .scan_bus = scan_static_bus, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver lpc_driver __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_LPC, -}; - -static void sata_enable_resources(struct device *dev) -{ - sataInitAfterPciEnum(sb_config); - pci_dev_enable_resources(dev); -} - -static void sata_init(struct device *dev) -{ - sb_config->StdHeader.Func = SB_MID_POST_INIT; - AmdSbDispatcher(sb_config); //sataInitMidPost only - commonInitLateBoot(sb_config); - sataInitLatePost(sb_config); -} - -static struct device_operations sata_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = sata_enable_resources, //pci_dev_enable_resources, - .init = sata_init, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver sata_driver __pci_driver = { - .ops = &sata_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_SATA, //SATA IDE Mode 4390 -}; - -#if CONFIG_USBDEBUG -static void usb_set_resources(struct device *dev) -{ - struct resource *res; - u32 base; - u32 old_debug; - - old_debug = get_ehci_debug(); - set_ehci_debug(0); - - pci_dev_set_resources(dev); - - res = find_resource(dev, 0x10); - set_ehci_debug(old_debug); - if (!res) - return; - base = res->base; - set_ehci_base(base); - report_resource_stored(dev, res, ""); -} -#endif - -static void usb_init(struct device *dev) -{ - usbInitAfterPciInit(sb_config); - commonInitLateBoot(sb_config); -} - -static struct device_operations usb_ops = { - .read_resources = pci_dev_read_resources, -#if CONFIG_USBDEBUG - .set_resources = usb_set_resources, -#else - .set_resources = pci_dev_set_resources, -#endif - .enable_resources = pci_dev_enable_resources, - .init = usb_init, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -/* - * The pci id of usb ctrl 0 and 1 are the same. - */ -static const struct pci_driver usb_ohci123_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_USB_18_0, /* OHCI-USB1, OHCI-USB2, OHCI-USB3 */ -}; - -static const struct pci_driver usb_ehci123_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_USB_18_2, /* EHCI-USB1, EHCI-USB2, EHCI-USB3 */ -}; - -static const struct pci_driver usb_ohci4_driver __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_USB_20_5, /* OHCI-USB4 */ -}; - - -static void azalia_init(struct device *dev) -{ - azaliaInitAfterPciEnum(sb_config); //Detect and configure High Definition Audio -} - -static struct device_operations azalia_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = azalia_init, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver azalia_driver __pci_driver = { - .ops = &azalia_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_HDA, -}; - -static void gec_init(struct device *dev) -{ - gecInitAfterPciEnum(sb_config); - gecInitLatePost(sb_config); - printk(BIOS_DEBUG, "gec hda enabled\n"); -} - -static struct device_operations gec_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = gec_init, - .scan_bus = 0, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver gec_driver __pci_driver = { - .ops = &gec_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_GEC, -}; - -static void pcie_init(device_t dev) -{ - sbPcieGppLateInit(sb_config); -} - -static struct device_operations pci_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = pcie_init, - .scan_bus = pci_scan_bridge, - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -static const struct pci_driver pci_driver __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_PCI, -}; - -struct device_operations bridge_ops = { - .read_resources = pci_bus_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_bus_enable_resources, - .init = pcie_init, - .scan_bus = pci_scan_bridge, - .enable = 0, - .reset_bus = pci_bus_reset, - .ops_pci = &lops_pci, -}; - -/* 0:15:0 PCIe PortA */ -static const struct pci_driver PORTA_driver __pci_driver = { - .ops = &bridge_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_PCIEA, -}; - -/* 0:15:1 PCIe PortB */ -static const struct pci_driver PORTB_driver __pci_driver = { - .ops = &bridge_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_PCIEB, -}; - -/* 0:15:2 PCIe PortC */ -static const struct pci_driver PORTC_driver __pci_driver = { - .ops = &bridge_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_PCIEC, -}; - -/* 0:15:3 PCIe PortD */ -static const struct pci_driver PORTD_driver __pci_driver = { - .ops = &bridge_ops, - .vendor = PCI_VENDOR_ID_ATI, - .device = PCI_DEVICE_ID_ATI_SB800_PCIED, -}; - -/** - * @brief SB Cimx entry point sbBeforePciInit wrapper - */ -static void sb800_enable(device_t dev) -{ - u8 gpp_port = 0; - struct southbridge_amd_cimx_wrapper_sb800_config *sb_chip = - (struct southbridge_amd_cimx_wrapper_sb800_config *)(dev->chip_info); - - sb800_cimx_config(sb_config); - printk(BIOS_DEBUG, "sb800_enable() "); - - /* Config SouthBridge SMBUS/ACPI/IDE/LPC/PCIB.*/ - commonInitEarlyBoot(sb_config); - commonInitEarlyPost(sb_config); - - switch (dev->path.pci.devfn) { - case (0x11 << 3) | 0: /* 0:11.0 SATA */ - if (dev->enabled) { - sb_config->SATAMODE.SataMode.SataController = ENABLED; - if (1 == sb_chip->boot_switch_sata_ide) - sb_config->SATAMODE.SataMode.SataIdeCombMdPriSecOpt = 0; //0 -IDE as primary. - else if (0 == sb_chip->boot_switch_sata_ide) - sb_config->SATAMODE.SataMode.SataIdeCombMdPriSecOpt = 1; //1 -IDE as secondary. - } else { - sb_config->SATAMODE.SataMode.SataController = DISABLED; - } - - sataInitBeforePciEnum(sb_config); // Init SATA class code and PHY - break; - - case (0x12 << 3) | 0: /* 0:12:0 OHCI-USB1 */ - case (0x12 << 3) | 2: /* 0:12:2 EHCI-USB1 */ - case (0x13 << 3) | 0: /* 0:13:0 OHCI-USB2 */ - case (0x13 << 3) | 2: /* 0:13:2 EHCI-USB2 */ - case (0x14 << 3) | 5: /* 0:14:5 OHCI-USB4 */ - case (0x16 << 3) | 0: /* 0:16:0 OHCI-USB3 */ - case (0x16 << 3) | 2: /* 0:16:2 EHCI-USB3 */ - usbInitBeforePciEnum(sb_config); // USB POST TIME Only - break; - - case (0x14 << 3) | 0: /* 0:14:0 SMBUS */ - break; - - case (0x14 << 3) | 1: /* 0:14:1 IDE */ - if (dev->enabled) { - sb_config->SATAMODE.SataMode.SataIdeCombinedMode = ENABLED; - } else { - sb_config->SATAMODE.SataMode.SataIdeCombinedMode = DISABLED; - } - sataInitBeforePciEnum(sb_config); // Init SATA class code and PHY - break; - - case (0x14 << 3) | 2: /* 0:14:2 HDA */ - if (dev->enabled) { - if (AZALIA_DISABLE == sb_config->AzaliaController) { - sb_config->AzaliaController = AZALIA_AUTO; - } - printk(BIOS_DEBUG, "hda enabled\n"); - } else { - sb_config->AzaliaController = AZALIA_DISABLE; - printk(BIOS_DEBUG, "hda disabled\n"); - } - azaliaInitBeforePciEnum(sb_config); // Detect and configure High Definition Audio - break; - - - case (0x14 << 3) | 3: /* 0:14:3 LPC */ - break; - - case (0x14 << 3) | 4: /* 0:14:4 PCI */ - break; - - case (0x14 << 3) | 6: /* 0:14:6 GEC */ - if (dev->enabled) { - sb_config->GecConfig = 0; - printk(BIOS_DEBUG, "gec enabled\n"); - } else { - sb_config->GecConfig = 1; - printk(BIOS_DEBUG, "gec disabled\n"); - } - gecInitBeforePciEnum(sb_config); // Init GEC - break; - - case (0x15 << 3) | 0: /* 0:15:0 PCIe PortA */ - case (0x15 << 3) | 1: /* 0:15:1 PCIe PortB */ - case (0x15 << 3) | 2: /* 0:15:2 PCIe PortC */ - case (0x15 << 3) | 3: /* 0:15:3 PCIe PortD */ - gpp_port = (dev->path.pci.devfn) & 0x03; - if (dev->enabled) { - sb_config->PORTCONFIG[gpp_port].PortCfg.PortPresent = ENABLED; - } else { - sb_config->PORTCONFIG[gpp_port].PortCfg.PortPresent = DISABLED; - } - - /* - * GPP_CFGMODE_X4000: PortA Lanes[3:0] - * GPP_CFGMODE_X2200: PortA Lanes[1:0], PortB Lanes[3:2] - * GPP_CFGMODE_X2110: PortA Lanes[1:0], PortB Lane2, PortC Lane3 - * GPP_CFGMODE_X1111: PortA Lanes0, PortB Lane1, PortC Lane2, PortD Lane3 - */ - if (sb_config->GppLinkConfig != sb_chip->gpp_configuration) { - sb_config->GppLinkConfig = sb_chip->gpp_configuration; - } - - sbPcieGppEarlyInit(sb_config); - break; - - default: - break; - } - - /* Special setting ABCFG registers before PCI emulation. */ - abSpecialSetBeforePciEnum(sb_config); - usbDesertPll(sb_config); - //sb_config->StdHeader.Func = SB_BEFORE_PCI_INIT; - //AmdSbDispatcher(sb_config); -} - -struct chip_operations southbridge_amd_cimx_wrapper_sb800_ops = { - CHIP_NAME("ATI SB800") - .enable_dev = sb800_enable, -}; diff --git a/src/southbridge/amd/cimx_wrapper/sb800/lpc.c b/src/southbridge/amd/cimx_wrapper/sb800/lpc.c deleted file mode 100644 index 7cc4d27efa..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/lpc.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include - -void lpc_read_resources(device_t dev) -{ - struct resource *res; - - /* Get the normal pci resources of this device */ - pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */ - - pci_get_resource(dev, SPIROM_BASE_ADDRESS); /* SPI ROM base address */ - - /* Add an extra subtractive resource for both memory and I/O. */ - res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); - res->base = 0; - res->size = 0x1000; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); - res->base = 0xff800000; - res->size = 0x00800000; /* 8 MB for flash */ - res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = 0xfec00000; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - compact_resources(dev); -} - -void lpc_set_resources(struct device *dev) -{ - struct resource *res; - - pci_dev_set_resources(dev); - - /* Specical case. SPI Base Address. The SpiRomEnable should be set. */ - res = find_resource(dev, SPIROM_BASE_ADDRESS); - pci_write_config32(dev, SPIROM_BASE_ADDRESS, res->base | 1 << 1); -} - -/** - * @brief Enable resources for children devices - * - * @param dev the device whos children's resources are to be enabled - * - */ -void lpc_enable_childrens_resources(device_t dev) -{ - struct bus *link; - u32 reg, reg_x; - int var_num = 0; - u16 reg_var[3]; - - reg = pci_read_config32(dev, 0x44); - reg_x = pci_read_config32(dev, 0x48); - - for (link = dev->link_list; link; link = link->next) { - device_t child; - for (child = link->children; child; - child = child->sibling) { - if (child->enabled - && (child->path.type == DEVICE_PATH_PNP)) { - struct resource *res; - for (res = child->resource_list; res; res = res->next) { - u32 base, end; /* don't need long long */ - if (!(res->flags & IORESOURCE_IO)) - continue; - base = res->base; - end = resource_end(res); -/* - printk(BIOS_DEBUG, "sb800 lpc decode:%s, base=0x%08x, end=0x%08x\n", - dev_path(child), base, end); -*/ - switch (base) { - case 0x60: /* KB */ - case 0x64: /* MS */ - reg |= (1 << 29); - break; - case 0x3f8: /* COM1 */ - reg |= (1 << 6); - break; - case 0x2f8: /* COM2 */ - reg |= (1 << 7); - break; - case 0x378: /* Parallal 1 */ - reg |= (1 << 0); - break; - case 0x3f0: /* FD0 */ - reg |= (1 << 26); - break; - case 0x220: /* Aduio 0 */ - reg |= (1 << 8); - break; - case 0x300: /* Midi 0 */ - reg |= (1 << 18); - break; - case 0x400: - reg_x |= (1 << 16); - break; - case 0x480: - reg_x |= (1 << 17); - break; - case 0x500: - reg_x |= (1 << 18); - break; - case 0x580: - reg_x |= (1 << 19); - break; - case 0x4700: - reg_x |= (1 << 22); - break; - case 0xfd60: - reg_x |= (1 << 23); - break; - default: - if (var_num >= 3) - continue; /* only 3 var ; compact them ? */ - switch (var_num) { - case 0: - reg_x |= (1 << 2); - break; - case 1: - reg_x |= (1 << 24); - break; - case 2: - reg_x |= (1 << 25); - break; - } - reg_var[var_num++] = - base & 0xffff; - } - } - } - } - } - pci_write_config32(dev, 0x44, reg); - pci_write_config32(dev, 0x48, reg_x); - /* Set WideIO for as many IOs found (fall through is on purpose) */ - switch (var_num) { - case 2: - pci_write_config16(dev, 0x90, reg_var[2]); - case 1: - pci_write_config16(dev, 0x66, reg_var[1]); - case 0: - //pci_write_config16(dev, 0x64, reg_var[0]); //cause filo can not find sata - break; - } -} diff --git a/src/southbridge/amd/cimx_wrapper/sb800/lpc.h b/src/southbridge/amd/cimx_wrapper/sb800/lpc.h deleted file mode 100644 index 00f15a3ebc..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/lpc.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _SB800_LPC_H_ -#define _SB800_LPC_H_ - -#define SPIROM_BASE_ADDRESS 0xA0 /* SPI ROM base address */ - -void lpc_read_resources(device_t dev); -void lpc_set_resources(device_t dev); -void lpc_enable_childrens_resources(device_t dev); - -#endif diff --git a/src/southbridge/amd/cimx_wrapper/sb800/smbus.c b/src/southbridge/amd/cimx_wrapper/sb800/smbus.c deleted file mode 100644 index 6599cafc30..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/smbus.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include - -static inline void smbus_delay(void) -{ - outb(inb(0x80), 0x80); -} - -static int smbus_wait_until_ready(u32 smbus_io_base) -{ - u32 loops; - - loops = SMBUS_TIMEOUT; - do { - u8 val; - val = inb(smbus_io_base + SMBHSTSTAT); - val &= 0x1f; - if (val == 0) { /* ready now */ - return 0; - } - outb(val, smbus_io_base + SMBHSTSTAT); - } while (--loops); - - return -2; /* time out */ -} - -static int smbus_wait_until_done(u32 smbus_io_base) -{ - u32 loops; - - loops = SMBUS_TIMEOUT; - do { - u8 val; - - val = inb(smbus_io_base + SMBHSTSTAT); - val &= 0x1f; /* mask off reserved bits */ - if (val & 0x1c) { - return -5; /* error */ - } - if (val == 0x02) { - outb(val, smbus_io_base + SMBHSTSTAT); /* clear status */ - return 0; - } - } while (--loops); - - return -3; /* timeout */ -} - -int do_smbus_recv_byte(u32 smbus_io_base, u32 device) -{ - u8 byte; - - if (smbus_wait_until_ready(smbus_io_base) < 0) { - return -2; /* not ready */ - } - - /* set the device I'm talking too */ - outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); - - byte = inb(smbus_io_base + SMBHSTCTRL); - byte &= 0xe3; /* Clear [4:2] */ - byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ - outb(byte, smbus_io_base + SMBHSTCTRL); - - /* poll for transaction completion */ - if (smbus_wait_until_done(smbus_io_base) < 0) { - return -3; /* timeout or error */ - } - - /* read results of transaction */ - byte = inb(smbus_io_base + SMBHSTCMD); - - return byte; -} - -int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val) -{ - u8 byte; - - if (smbus_wait_until_ready(smbus_io_base) < 0) { - return -2; /* not ready */ - } - - /* set the command... */ - outb(val, smbus_io_base + SMBHSTCMD); - - /* set the device I'm talking too */ - outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); - - byte = inb(smbus_io_base + SMBHSTCTRL); - byte &= 0xe3; /* Clear [4:2] */ - byte |= (1 << 2) | (1 << 6); /* Byte data read/write command, start the command */ - outb(byte, smbus_io_base + SMBHSTCTRL); - - /* poll for transaction completion */ - if (smbus_wait_until_done(smbus_io_base) < 0) { - return -3; /* timeout or error */ - } - - return 0; -} - -int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address) -{ - u8 byte; - - if (smbus_wait_until_ready(smbus_io_base) < 0) { - return -2; /* not ready */ - } - - /* set the command/address... */ - outb(address & 0xff, smbus_io_base + SMBHSTCMD); - - /* set the device I'm talking too */ - outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR); - - byte = inb(smbus_io_base + SMBHSTCTRL); - byte &= 0xe3; /* Clear [4:2] */ - byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ - outb(byte, smbus_io_base + SMBHSTCTRL); - - /* poll for transaction completion */ - if (smbus_wait_until_done(smbus_io_base) < 0) { - return -3; /* timeout or error */ - } - - /* read results of transaction */ - byte = inb(smbus_io_base + SMBHSTDAT0); - - return byte; -} - -int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val) -{ - u8 byte; - - if (smbus_wait_until_ready(smbus_io_base) < 0) { - return -2; /* not ready */ - } - - /* set the command/address... */ - outb(address & 0xff, smbus_io_base + SMBHSTCMD); - - /* set the device I'm talking too */ - outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR); - - /* output value */ - outb(val, smbus_io_base + SMBHSTDAT0); - - byte = inb(smbus_io_base + SMBHSTCTRL); - byte &= 0xe3; /* Clear [4:2] */ - byte |= (1 << 3) | (1 << 6); /* Byte data read/write command, start the command */ - outb(byte, smbus_io_base + SMBHSTCTRL); - - /* poll for transaction completion */ - if (smbus_wait_until_done(smbus_io_base) < 0) { - return -3; /* timeout or error */ - } - - return 0; -} - -void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val) -{ - u32 tmp; - - outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); - tmp = inl(AB_DATA); - /* rpr 4.2 - * For certain revisions of the chip, the ABCFG registers, - * with an address of 0x100NN (where 'N' is any hexadecimal - * number), require an extra programming step.*/ - outl(0, AB_INDX); - - tmp &= ~mask; - tmp |= val; - - /* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */ - outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ - outl(tmp, AB_DATA); - outl(0, AB_INDX); -} - -void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val) -{ - u32 tmp; - - outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); - tmp = inl(AB_DATA); - /* rpr 4.2 - * For certain revisions of the chip, the ABCFG registers, - * with an address of 0x100NN (where 'N' is any hexadecimal - * number), require an extra programming step.*/ - outl(0, AB_INDX); - - tmp &= ~mask; - tmp |= val; - - //printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr); - outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX); /* probably we dont have to do it again. */ - outl(tmp, AB_DATA); - outl(0, AB_INDX); -} - -/* space = 0: AX_INDXC, AX_DATAC - * space = 1: AX_INDXP, AX_DATAP - */ -void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, u32 mask, u32 val) -{ - u32 tmp; - - /* read axindc to tmp */ - outl(space << 29 | space << 3 | 0x30, AB_INDX); - outl(axindc, AB_DATA); - outl(0, AB_INDX); - outl(space << 29 | space << 3 | 0x34, AB_INDX); - tmp = inl(AB_DATA); - outl(0, AB_INDX); - - tmp &= ~mask; - tmp |= val; - - /* write tmp */ - outl(space << 29 | space << 3 | 0x30, AB_INDX); - outl(axindc, AB_DATA); - outl(0, AB_INDX); - outl(space << 29 | space << 3 | 0x34, AB_INDX); - outl(tmp, AB_DATA); - outl(0, AB_INDX); -} diff --git a/src/southbridge/amd/cimx_wrapper/sb800/smbus.h b/src/southbridge/amd/cimx_wrapper/sb800/smbus.h deleted file mode 100644 index 6f00a85cf0..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/smbus.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _SB800_SMBUS_H_ -#define _SB800_SMBUS_H_ - -//#include - -#define SMBUS_IO_BASE SMBUS0_BASE_ADDRESS - -#define SMBHSTSTAT 0x0 -#define SMBSLVSTAT 0x1 -#define SMBHSTCTRL 0x2 -#define SMBHSTCMD 0x3 -#define SMBHSTADDR 0x4 -#define SMBHSTDAT0 0x5 -#define SMBHSTDAT1 0x6 -#define SMBHSTBLKDAT 0x7 - -#define SMBSLVCTRL 0x8 -#define SMBSLVCMD_SHADOW 0x9 -#define SMBSLVEVT 0xa -#define SMBSLVDAT 0xc - -/*//SB00.H -#define AX_INDXC 0 -#define AX_INDXP 2 -#define AXCFG 4 -#define ABCFG 6 -#define RC_INDXC 1 -#define RC_INDXP 3 -*/ - -#define AB_INDX 0xCD8 -#define AB_DATA (AB_INDX+4) - -/* Between 1-10 seconds, We should never timeout normally - * Longer than this is just painful when a timeout condition occurs. - */ -#define SMBUS_TIMEOUT (100*1000*10) - -#define abcfg_reg(reg, mask, val) \ - alink_ab_indx((ABCFG), (reg), (mask), (val)) -#define axcfg_reg(reg, mask, val) \ - alink_ab_indx((AXCFG), (reg), (mask), (val)) -#define axindxc_reg(reg, mask, val) \ - alink_ax_indx((AX_INDXC), (reg), (mask), (val)) -#define axindxp_reg(reg, mask, val) \ - alink_ax_indx((AX_INDXP), (reg), (mask), (val)) -#define rcindxc_reg(reg, port, mask, val) \ - alink_rc_indx((RC_INDXC), (reg), (port), (mask), (val)) -#define rcindxp_reg(reg, port, mask, val) \ - alink_rc_indx((RC_INDXP), (reg), (port), (mask), (val)) - -int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); -int do_smbus_recv_byte(u32 smbus_io_base, u32 device); -int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val); -void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port, u32 mask, u32 val); -void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val); -void alink_ax_indx(u32 space /*c or p? */ , u32 axindc, u32 mask, u32 val); - -#endif -- cgit v1.2.3