From 714caaea388062bb89c320a871347f23c24a790b Mon Sep 17 00:00:00 2001 From: Greg Watson Date: Mon, 28 Jul 2003 21:21:03 +0000 Subject: PPC 4XX support git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1056 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/arch/ppc/include/ppc4xx.h | 415 +++++++++++++++++++++++ src/cpu/ppc/ppc4xx/Config.lb | 9 + src/cpu/ppc/ppc4xx/clock.c | 173 ++++++++++ src/cpu/ppc/ppc4xx/mem.c | 7 + src/cpu/ppc/ppc4xx/ppc4xx.inc | 750 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 1354 insertions(+) create mode 100644 src/arch/ppc/include/ppc4xx.h create mode 100644 src/cpu/ppc/ppc4xx/Config.lb create mode 100644 src/cpu/ppc/ppc4xx/clock.c create mode 100644 src/cpu/ppc/ppc4xx/mem.c create mode 100644 src/cpu/ppc/ppc4xx/ppc4xx.inc diff --git a/src/arch/ppc/include/ppc4xx.h b/src/arch/ppc/include/ppc4xx.h new file mode 100644 index 0000000000..5d5c979970 --- /dev/null +++ b/src/arch/ppc/include/ppc4xx.h @@ -0,0 +1,415 @@ +/*----------------------------------------------------------------------------+ +| +| This source code has been made available to you by IBM on an AS-IS +| basis. Anyone receiving this source is licensed under IBM +| copyrights to use it in any way he or she deems fit, including +| copying it, modifying it, compiling it, and redistributing it either +| with or without modifications. No license under IBM patents or +| patent applications is to be implied by the copyright license. +| +| Any user of this software should understand that IBM cannot provide +| technical support for this software and will not be responsible for +| any consequences resulting from the use of this software. +| +| Any person who transfers this source code or any derivative work +| must include the IBM copyright notice, this paragraph, and the +| preceding two paragraphs in the transferred software. +| +| COPYRIGHT I B M CORPORATION 1999 +| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M ++----------------------------------------------------------------------------*/ + +#ifndef __PPC4XX_H__ +#define __PPC4XX_H__ + +/*--------------------------------------------------------------------- */ +/* Special Purpose Registers */ +/*--------------------------------------------------------------------- */ + #define srr2 0x3de /* save/restore register 2 */ + #define srr3 0x3df /* save/restore register 3 */ + #define dbsr 0x3f0 /* debug status register */ + #define dbcr0 0x3f2 /* debug control register 0 */ + #define dbcr1 0x3bd /* debug control register 1 */ + #define iac1 0x3f4 /* instruction address comparator 1 */ + #define iac2 0x3f5 /* instruction address comparator 2 */ + #define iac3 0x3b4 /* instruction address comparator 3 */ + #define iac4 0x3b5 /* instruction address comparator 4 */ + #define dac1 0x3f6 /* data address comparator 1 */ + #define dac2 0x3f7 /* data address comparator 2 */ + #define dccr 0x3fa /* data cache control register */ + #define iccr 0x3fb /* instruction cache control register */ + #define esr 0x3d4 /* execption syndrome register */ + #define dear 0x3d5 /* data exeption address register */ + #define evpr 0x3d6 /* exeption vector prefix register */ + #define tsr 0x3d8 /* timer status register */ + #define tcr 0x3da /* timer control register */ + #define pit 0x3db /* programmable interval timer */ + #define sgr 0x3b9 /* storage guarded reg */ + #define dcwr 0x3ba /* data cache write-thru reg*/ + #define sler 0x3bb /* storage little-endian reg */ + #define cdbcr 0x3d7 /* cache debug cntrl reg */ + #define icdbdr 0x3d3 /* instr cache dbug data reg*/ + #define ccr0 0x3b3 /* core configuration register */ + #define dvc1 0x3b6 /* data value compare register 1 */ + #define dvc2 0x3b7 /* data value compare register 2 */ + #define pid 0x3b1 /* process ID */ + #define su0r 0x3bc /* storage user-defined register 0 */ + #define zpr 0x3b0 /* zone protection regsiter */ + + #define tbl 0x11c /* time base lower - privileged write */ + #define tbu 0x11d /* time base upper - privileged write */ + + #define sprg4r 0x104 /* Special purpose general 4 - read only */ + #define sprg5r 0x105 /* Special purpose general 5 - read only */ + #define sprg6r 0x106 /* Special purpose general 6 - read only */ + #define sprg7r 0x107 /* Special purpose general 7 - read only */ + #define sprg4w 0x114 /* Special purpose general 4 - write only */ + #define sprg5w 0x115 /* Special purpose general 5 - write only */ + #define sprg6w 0x116 /* Special purpose general 6 - write only */ + #define sprg7w 0x117 /* Special purpose general 7 - write only */ + +/****************************************************************************** + * Special for PPC405GP + ******************************************************************************/ + +/****************************************************************************** + * DMA + ******************************************************************************/ +#define DMA_DCR_BASE 0x100 +#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ +#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ +#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */ +#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */ +#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */ +#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ +#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ +#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */ +#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */ +#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */ +#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ +#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ +#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */ +#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */ +#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */ +#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */ +#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */ +#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */ +#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */ +#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */ +#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */ +#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ +#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */ + +/****************************************************************************** + * Universal interrupt controller + ******************************************************************************/ +#define UIC_DCR_BASE 0xc0 +#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */ +#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */ +#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */ +#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */ +#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */ +#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */ +#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */ +#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */ +#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */ + +/*-----------------------------------------------------------------------------+ +| Universal interrupt controller interrupts ++-----------------------------------------------------------------------------*/ +#define UIC_UART0 0x80000000 /* UART 0 */ +#define UIC_UART1 0x40000000 /* UART 1 */ +#define UIC_IIC 0x20000000 /* IIC */ +#define UIC_EXT_MAST 0x10000000 /* External Master */ +#define UIC_PCI 0x08000000 /* PCI write to command reg */ +#define UIC_DMA0 0x04000000 /* DMA chan. 0 */ +#define UIC_DMA1 0x02000000 /* DMA chan. 1 */ +#define UIC_DMA2 0x01000000 /* DMA chan. 2 */ +#define UIC_DMA3 0x00800000 /* DMA chan. 3 */ +#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */ +#define UIC_MAL_SERR 0x00200000 /* MAL SERR */ +#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */ +#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */ +#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */ +#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */ +#define UIC_ENET 0x00010000 /* Ethernet */ +#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */ +#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error */ +#define UIC_PCI_PM 0x00002000 /* PCI Power Management */ +#define UIC_EXT0 0x00000040 /* External interrupt 0 */ +#define UIC_EXT1 0x00000020 /* External interrupt 1 */ +#define UIC_EXT2 0x00000010 /* External interrupt 2 */ +#define UIC_EXT3 0x00000008 /* External interrupt 3 */ +#define UIC_EXT4 0x00000004 /* External interrupt 4 */ +#define UIC_EXT5 0x00000002 /* External interrupt 5 */ +#define UIC_EXT6 0x00000001 /* External interrupt 6 */ + +/****************************************************************************** + * SDRAM Controller + ******************************************************************************/ +#define SDRAM_DCR_BASE 0x10 +#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */ +#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */ + /* values for memcfga register - indirect addressing of these regs */ +#ifndef CONFIG_405EP + #define mem_besra 0x00 /* bus error syndrome reg a */ + #define mem_besrsa 0x04 /* bus error syndrome reg set a */ + #define mem_besrb 0x08 /* bus error syndrome reg b */ + #define mem_besrsb 0x0c /* bus error syndrome reg set b */ + #define mem_bear 0x10 /* bus error address reg */ +#endif + #define mem_mcopt1 0x20 /* memory controller options 1 */ + #define mem_rtr 0x30 /* refresh timer reg */ + #define mem_pmit 0x34 /* power management idle timer */ + #define mem_mb0cf 0x40 /* memory bank 0 configuration */ + #define mem_mb1cf 0x44 /* memory bank 1 configuration */ + #define mem_mb2cf 0x48 /* memory bank 2 configuration */ + #define mem_mb3cf 0x4c /* memory bank 3 configuration */ + #define mem_sdtr1 0x80 /* timing reg 1 */ +#ifndef CONFIG_405EP + #define mem_ecccf 0x94 /* ECC configuration */ + #define mem_eccerr 0x98 /* ECC error status */ +#endif + +/****************************************************************************** + * Decompression Controller + ******************************************************************************/ +#define DECOMP_DCR_BASE 0x14 +#define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */ +#define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */ + /* values for kiar register - indirect addressing of these regs */ + #define kitor0 0x00 /* index table origin register 0 */ + #define kitor1 0x01 /* index table origin register 1 */ + #define kitor2 0x02 /* index table origin register 2 */ + #define kitor3 0x03 /* index table origin register 3 */ + #define kaddr0 0x04 /* address decode definition regsiter 0 */ + #define kaddr1 0x05 /* address decode definition regsiter 1 */ + #define kconf 0x40 /* decompression core config register */ + #define kid 0x41 /* decompression core ID register */ + #define kver 0x42 /* decompression core version # reg */ + #define kpear 0x50 /* bus error addr reg (PLB addr) */ + #define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/ + #define kesr0 0x52 /* bus error status reg 0 (R/clear) */ + #define kesr0s 0x53 /* bus error status reg 0 (set) */ + /* There are 0x400 of the following registers, from krom0 to krom3ff*/ + /* Only the first one is given here. */ + #define krom0 0x400 /* SRAM/ROM read/write */ + +/****************************************************************************** + * Power Management + ******************************************************************************/ +#define POWERMAN_DCR_BASE 0xb8 +#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */ +#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */ +#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */ + +/****************************************************************************** + * Extrnal Bus Controller + ******************************************************************************/ +#define EBC_DCR_BASE 0x12 +#define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */ +#define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */ + /* values for ebccfga register - indirect addressing of these regs */ + #define pb0cr 0x00 /* periph bank 0 config reg */ + #define pb1cr 0x01 /* periph bank 1 config reg */ + #define pb2cr 0x02 /* periph bank 2 config reg */ + #define pb3cr 0x03 /* periph bank 3 config reg */ + #define pb4cr 0x04 /* periph bank 4 config reg */ + #define pb5cr 0x05 /* periph bank 5 config reg */ + #define pb6cr 0x06 /* periph bank 6 config reg */ + #define pb7cr 0x07 /* periph bank 7 config reg */ + #define pb0ap 0x10 /* periph bank 0 access parameters */ + #define pb1ap 0x11 /* periph bank 1 access parameters */ + #define pb2ap 0x12 /* periph bank 2 access parameters */ + #define pb3ap 0x13 /* periph bank 3 access parameters */ + #define pb4ap 0x14 /* periph bank 4 access parameters */ + #define pb5ap 0x15 /* periph bank 5 access parameters */ + #define pb6ap 0x16 /* periph bank 6 access parameters */ + #define pb7ap 0x17 /* periph bank 7 access parameters */ + #define pbear 0x20 /* periph bus error addr reg */ + #define pbesr0 0x21 /* periph bus error status reg 0 */ + #define pbesr1 0x22 /* periph bus error status reg 1 */ + #define epcr 0x23 /* external periph control reg */ + +/****************************************************************************** + * Control + ******************************************************************************/ +#define CNTRL_DCR_BASE 0x0b0 +#define CPC0_PLLMR (CNTRL_DCR_BASE+0x0) /* PLL mode register */ +#define CPC0_CR0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */ +#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */ +#define CPC0_PSR (CNTRL_DCR_BASE+0x4) /* strap register */ + +#define ecr (0xaa) /* edge conditioner register (405gpr) */ + +/* Bit definitions */ +#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ +#define PLLMR_FWD_DIV_BYPASS 0xE0000000 +#define PLLMR_FWD_DIV_3 0xA0000000 +#define PLLMR_FWD_DIV_4 0x80000000 +#define PLLMR_FWD_DIV_6 0x40000000 + +#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */ +#define PLLMR_FB_DIV_1 0x02000000 +#define PLLMR_FB_DIV_2 0x04000000 +#define PLLMR_FB_DIV_3 0x06000000 +#define PLLMR_FB_DIV_4 0x08000000 + +#define PLLMR_TUNING_MASK 0x01F80000 + +#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */ +#define PLLMR_CPU_PLB_DIV_1 0x00000000 +#define PLLMR_CPU_PLB_DIV_2 0x00020000 +#define PLLMR_CPU_PLB_DIV_3 0x00040000 +#define PLLMR_CPU_PLB_DIV_4 0x00060000 + +#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */ +#define PLLMR_OPB_PLB_DIV_1 0x00000000 +#define PLLMR_OPB_PLB_DIV_2 0x00008000 +#define PLLMR_OPB_PLB_DIV_3 0x00010000 +#define PLLMR_OPB_PLB_DIV_4 0x00018000 + +#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */ +#define PLLMR_PCI_PLB_DIV_1 0x00000000 +#define PLLMR_PCI_PLB_DIV_2 0x00002000 +#define PLLMR_PCI_PLB_DIV_3 0x00004000 +#define PLLMR_PCI_PLB_DIV_4 0x00006000 + +#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */ +#define PLLMR_EXB_PLB_DIV_2 0x00000000 +#define PLLMR_EXB_PLB_DIV_3 0x00000800 +#define PLLMR_EXB_PLB_DIV_4 0x00001000 +#define PLLMR_EXB_PLB_DIV_5 0x00001800 + +/* definitions for PPC405GPr (new mode strapping) */ +#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */ + +#define PSR_PLL_FWD_MASK 0xC0000000 +#define PSR_PLL_FDBACK_MASK 0x30000000 +#define PSR_PLL_TUNING_MASK 0x0E000000 +#define PSR_PLB_CPU_MASK 0x01800000 +#define PSR_OPB_PLB_MASK 0x00600000 +#define PSR_PCI_PLB_MASK 0x00180000 +#define PSR_EB_PLB_MASK 0x00060000 +#define PSR_ROM_WIDTH_MASK 0x00018000 +#define PSR_ROM_LOC 0x00004000 +#define PSR_PCI_ASYNC_EN 0x00001000 +#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */ +#define PSR_PCI_ARBIT_EN 0x00000400 +#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */ + +/* + * PLL Voltage Controlled Oscillator (VCO) definitions + * Maximum and minimum values (in MHz) for correct PLL operation. + */ +#define VCO_MIN 400 +#define VCO_MAX 800 + +/****************************************************************************** + * Memory Access Layer + ******************************************************************************/ +#define MAL_DCR_BASE 0x180 +#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ +#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ +#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ +#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ +#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */ +#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ +#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ +#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ +#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */ +#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ +#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ +#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ +#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */ +#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */ +#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ +#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ + +/*----------------------------------------------------------------------------- +| IIC Register Offsets +'----------------------------------------------------------------------------*/ +#define IICMDBUF 0x00 +#define IICSDBUF 0x02 +#define IICLMADR 0x04 +#define IICHMADR 0x05 +#define IICCNTL 0x06 +#define IICMDCNTL 0x07 +#define IICSTS 0x08 +#define IICEXTSTS 0x09 +#define IICLSADR 0x0A +#define IICHSADR 0x0B +#define IICCLKDIV 0x0C +#define IICINTRMSK 0x0D +#define IICXFRCNT 0x0E +#define IICXTCNTLSS 0x0F +#define IICDIRECTCNTL 0x10 + +/*----------------------------------------------------------------------------- +| UART Register Offsets +'----------------------------------------------------------------------------*/ +#define DATA_REG 0x00 +#define DL_LSB 0x00 +#define DL_MSB 0x01 +#define INT_ENABLE 0x01 +#define FIFO_CONTROL 0x02 +#define LINE_CONTROL 0x03 +#define MODEM_CONTROL 0x04 +#define LINE_STATUS 0x05 +#define MODEM_STATUS 0x06 +#define SCRATCH 0x07 + +/****************************************************************************** + * On Chip Memory + ******************************************************************************/ +#define OCM_DCR_BASE 0x018 +#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */ +#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ +#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */ +#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */ + +/****************************************************************************** + * GPIO macro register defines + ******************************************************************************/ +#define GPIO_BASE 0xEF600700 +#define GPIO0_OR (GPIO_BASE+0x0) +#define GPIO0_TCR (GPIO_BASE+0x4) +#define GPIO0_OSRH (GPIO_BASE+0x8) +#define GPIO0_OSRL (GPIO_BASE+0xC) +#define GPIO0_TSRH (GPIO_BASE+0x10) +#define GPIO0_TSRL (GPIO_BASE+0x14) +#define GPIO0_ODR (GPIO_BASE+0x18) +#define GPIO0_IR (GPIO_BASE+0x1C) +#define GPIO0_RR1 (GPIO_BASE+0x20) +#define GPIO0_RR2 (GPIO_BASE+0x24) +#define GPIO0_ISR1H (GPIO_BASE+0x30) +#define GPIO0_ISR1L (GPIO_BASE+0x34) +#define GPIO0_ISR2H (GPIO_BASE+0x38) +#define GPIO0_ISR2L (GPIO_BASE+0x3C) + + +/* + * Macro for accessing the indirect EBC register + */ +#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) +#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd) + +struct ppc4xx_sys_info +{ + unsigned long pllFwdDiv; + unsigned long pllFwdDivB; + unsigned long pllFbkDiv; + unsigned long pllPlbDiv; + unsigned long pllPciDiv; + unsigned long pllExtBusDiv; + unsigned long pllOpbDiv; + unsigned long freqVCOMhz; /* in MHz */ + unsigned long freqProcessor; + unsigned long freqPLB; + unsigned long freqPCI; + unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */ + unsigned long pciClkSync; /* PCI clock is synchronous */ +}; + +#endif /* __PPC4XX_H__ */ + diff --git a/src/cpu/ppc/ppc4xx/Config.lb b/src/cpu/ppc/ppc4xx/Config.lb new file mode 100644 index 0000000000..1f1002293f --- /dev/null +++ b/src/cpu/ppc/ppc4xx/Config.lb @@ -0,0 +1,9 @@ +## +## CPU initialization +## +initinclude "EARLY_INIT" cpu/ppc/ppc4xx/ppc4xx.inc + +object mem.o +object pci.S +object clock.o + diff --git a/src/cpu/ppc/ppc4xx/clock.c b/src/cpu/ppc/ppc4xx/clock.c new file mode 100644 index 0000000000..770c0fa117 --- /dev/null +++ b/src/cpu/ppc/ppc4xx/clock.c @@ -0,0 +1,173 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +/* ------------------------------------------------------------------------- */ + +#define ONE_BILLION 1000000000 + +void get_sys_info (struct ppc4xx_sys_info * sysInfo) +{ + unsigned long pllmr; + unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ * 1000); + unsigned pvr = ppc_getpvr(); + unsigned long psr; + unsigned long m; + + memset(&sysInfo, 0, sizeof(*sysInfo)); + + /* + * Read PLL Mode register + */ + pllmr = ppc_getdcr(CPC0_PLLMR); + + /* + * Read Pin Strapping register + */ + psr = ppc_getdcr(CPC0_PSR); + + /* + * Determine FWD_DIV. + */ + sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29); + + /* + * Determine FBK_DIV. + */ + sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25); + if (sysInfo->pllFbkDiv == 0) { + sysInfo->pllFbkDiv = 16; + } + + /* + * Determine PLB_DIV. + */ + sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1; + + /* + * Determine PCI_DIV. + */ + sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1; + + /* + * Determine EXTBUS_DIV. + */ + sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2; + + /* + * Determine OPB_DIV. + */ + sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1; + + /* + * Check if PPC405GPr used (mask minor revision field) + */ + if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) { + /* + * Determine FWD_DIV B (only PPC405GPr with new mode strapping). + */ + sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK); + + /* + * Determine factor m depending on PLL feedback clock source + */ + if (!(psr & PSR_PCI_ASYNC_EN)) { + if (psr & PSR_NEW_MODE_EN) { + /* + * sync pci clock used as feedback (new mode) + */ + m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv; + } else { + /* + * sync pci clock used as feedback (legacy mode) + */ + m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv; + } + } else if (psr & PSR_NEW_MODE_EN) { + if (psr & PSR_PERCLK_SYNC_MODE_EN) { + /* + * PerClk used as feedback (new mode) + */ + m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv; + } else { + /* + * CPU clock used as feedback (new mode) + */ + m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv; + } + } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) { + /* + * PerClk used as feedback (legacy mode) + */ + m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv; + } else { + /* + * PLB clock used as feedback (legacy mode) + */ + m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv; + } + + sysInfo->freqVCOMhz = (1000000 * m) / sysClkPeriodPs; + sysInfo->freqProcessor = (sysInfo->freqVCOMhz * 1000000) / sysInfo->pllFwdDiv; + sysInfo->freqPLB = (sysInfo->freqVCOMhz * 1000000) / + (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv); + } else { + /* + * Check pllFwdDiv to see if running in bypass mode where the CPU speed + * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO + * to make sure it is within the proper range. + * spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV + * Note freqVCO is calculated in Mhz to avoid errors introduced by rounding. + */ + if (sysInfo->pllFwdDiv == 1) { + sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ * 1000000; + sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv; + } else { + sysInfo->freqVCOMhz = ( 1000000 * + sysInfo->pllFwdDiv * + sysInfo->pllFbkDiv * + sysInfo->pllPlbDiv + ) / sysClkPeriodPs; + if (sysInfo->freqVCOMhz >= VCO_MIN + && sysInfo->freqVCOMhz <= VCO_MAX) { + sysInfo->freqPLB = (ONE_BILLION / + ((sysClkPeriodPs * 10) / + sysInfo->pllFbkDiv)) * 10000; + sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv; + } + } + } +} + +unsigned long get_clock_speed(void) +{ + struct ppc4xx_sys_info sys_info; + + get_sys_info(&sys_info); + return sys_info.freqProcessor; +} diff --git a/src/cpu/ppc/ppc4xx/mem.c b/src/cpu/ppc/ppc4xx/mem.c new file mode 100644 index 0000000000..9fa6daa19b --- /dev/null +++ b/src/cpu/ppc/ppc4xx/mem.c @@ -0,0 +1,7 @@ +#include + +struct mem_range * +sizeram(void) +{ + return 0; +} diff --git a/src/cpu/ppc/ppc4xx/ppc4xx.inc b/src/cpu/ppc/ppc4xx/ppc4xx.inc new file mode 100644 index 0000000000..b365988d6c --- /dev/null +++ b/src/cpu/ppc/ppc4xx/ppc4xx.inc @@ -0,0 +1,750 @@ +#if 0 +/* + * Copyright (C) 1998 Dan Malek + * Copyright (C) 1999 Magnus Damm + * Copyright (C) 2000,2001,2002 Wolfgang Denk + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This source code has been made available to you by IBM on an AS-IS + * basis. Anyone receiving this source is licensed under IBM + * copyrights to use it in any way he or she deems fit, including + * copying it, modifying it, compiling it, and redistributing it either + * with or without modifications. No license under IBM patents or + * patent applications is to be implied by the copyright license. + * + * Any user of this software should understand that IBM cannot provide + * technical support for this software and will not be responsible for + * any consequences resulting from the use of this software. + * + * Any person who transfers this source code or any derivative work + * must include the IBM copyright notice, this paragraph, and the + * preceding two paragraphs in the transferred software. + * + * COPYRIGHT I B M CORPORATION 1995 + * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + * + */ + +/* + * Startup Code for IBM 4xx PowerPC based Embedded Boards + * + * Base on the U-Boot Startup Code + * + * The processor starts at 0xfffffffc and the code is executed + * from flash/rom. + * in memory, but as long we don't jump around before relocating. + * board_init lies at a quite high address and when the cpu has + * jumped there, everything is ok. + * This works because the cpu gives the FLASH (CS0) the whole + * address space at startup, and board_init lies as a echo of + * the flash somewhere up there in the memorymap. + * + * board_init will change CS0 to be positioned at the correct + * address and (s)dram will be positioned at address 0 + */ +#include +#include + + .globl _start +_start: + +/*****************************************************************************/ + addi r4,r0,0x0000 + mtspr sgr,r4 + mtspr dcwr,r4 + mtesr r4 /* clear Exception Syndrome Reg */ + mttcr r4 /* clear Timer Control Reg */ + mtxer r4 /* clear Fixed-Point Exception Reg */ + mtevpr r4 /* clear Exception Vector Prefix Reg */ + addi r4,r0,0x1000 /* set ME bit (Machine Exceptions) */ + oris r4,r4,0x0002 /* set CE bit (Critical Exceptions) */ + mtmsr r4 /* change MSR */ + addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */ + /* dbsr is cleared by setting bits to 1) */ + mtdbsr r4 /* clear/reset the dbsr */ + + /*----------------------------------------------------------------------- */ + /* Invalidate I and D caches. Enable I cache for defined memory regions */ + /* to speed things up. Leave the D cache disabled for now. It will be */ + /* enabled/left disabled later based on user selected menu options. */ + /* Be aware that the I cache may be disabled later based on the menu */ + /* options as well. See miscLib/main.c. */ + /*----------------------------------------------------------------------- */ + bl invalidate_icache + bl invalidate_dcache + + /*----------------------------------------------------------------------- */ + /* Enable two 128MB cachable regions. */ + /*----------------------------------------------------------------------- */ + addis r4,r0,0x8000 + addi r4,r4,0x0001 + mticcr r4 /* instruction cache */ + isync + + addis r4,r0,0x0000 + addi r4,r4,0x0000 + mtdccr r4 /* data cache */ + +#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) + /*----------------------------------------------------------------------- */ + /* Tune the speed and size for flash CS0 */ + /*----------------------------------------------------------------------- */ + bl ext_bus_cntlr_init +#endif + +#if defined(CONFIG_405EP) + /*----------------------------------------------------------------------- */ + /* DMA Status, clear to come up clean */ + /*----------------------------------------------------------------------- */ + addis r3,r0, 0xFFFF /* Clear all existing DMA status */ + ori r3,r3, 0xFFFF + mtdcr dmasr, r3 + + bl ppc405ep_init /* do ppc405ep specific init */ +#endif /* CONFIG_405EP */ + + /*----------------------------------------------------------------------- */ + /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */ + /*----------------------------------------------------------------------- */ +#ifdef CFG_INIT_DCACHE_CS + /*----------------------------------------------------------------------- */ + /* Memory Bank x (nothingness) initialization 1GB+64MEG */ + /* used as temporary stack pointer for stage0 */ + /*----------------------------------------------------------------------- */ + li r4,PBxAP + mtdcr ebccfga,r4 + lis r4,0x0380 + ori r4,r4,0x0480 + mtdcr ebccfgd,r4 + + addi r4,0,PBxCR + mtdcr ebccfga,r4 + lis r4,0x400D + ori r4,r4,0xa000 + mtdcr ebccfgd,r4 + + /* turn on data chache for this region */ + lis r4,0x0080 + mtdccr r4 + + /* set stack pointer and clear stack to known value */ + + lis r1,CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET@l + + li r4,2048 /* we store 2048 words to stack */ + mtctr r4 + + lis r2,CFG_INIT_RAM_ADDR@h /* we also clear data area */ + ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */ + + lis r4,0xdead /* we store 0xdeaddead in the stack */ + ori r4,r4,0xdead + +..stackloop: + stwu r4,-4(r2) + bdnz ..stackloop + + li r0, 0 /* Make room for stack frame header and */ + stwu r0, -4(r1) /* clear final stack frame so that */ + stwu r0, -4(r1) /* stack backtraces terminate cleanly */ + /* + * Set up a dummy frame to store reset vector as return address. + * this causes stack underflow to reset board. + */ + stwu r1, -8(r1) /* Save back chain and move SP */ + addis r0, 0, RESET_VECTOR@h /* Address of reset vector */ + ori r0, r0, RESET_VECTOR@l + stwu r1, -8(r1) /* Save back chain and move SP */ + stw r0, +12(r1) /* Save return addr (underflow vect) */ +#endif /* CFG_INIT_DCACHE_CS */ + + /*----------------------------------------------------------------------- */ + /* Initialize SDRAM Controller */ + /*----------------------------------------------------------------------- */ + bl sdram_init + + /* + * Setup temporary stack pointer only for boards + * that do not use SDRAM SPD I2C stuff since it + * is already initialized to use DCACHE or OCM + * stacks. + */ +#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM)) + lis r1, CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */ + + li r0, 0 /* Make room for stack frame header and */ + stwu r0, -4(r1) /* clear final stack frame so that */ + stwu r0, -4(r1) /* stack backtraces terminate cleanly */ + /* + * Set up a dummy frame to store reset vector as return address. + * this causes stack underflow to reset board. + */ + stwu r1, -8(r1) /* Save back chain and move SP */ + lis r0, RESET_VECTOR@h /* Address of reset vector */ + ori r0, r0, RESET_VECTOR@l + stwu r1, -8(r1) /* Save back chain and move SP */ + stw r0, +12(r1) /* Save return addr (underflow vect) */ +#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */ + + GET_GOT /* initialize GOT access */ + + bl cpu_init_f /* run low-level CPU init code (from Flash) */ + + /* NEVER RETURNS! */ + bl board_init_f /* run first part of init code (from Flash) */ + + + +/* Cache functions. +*/ +invalidate_icache: + iccci r0,r0 /* for 405, iccci invalidates the */ + blr /* entire I cache */ + +invalidate_dcache: + addi r6,0,0x0000 /* clear GPR 6 */ + /* Do loop for # of dcache congruence classes. */ + addi r7,r0, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2) + /* NOTE: dccci invalidates both */ + mtctr r7 /* ways in the D cache */ +..dcloop: + dccci 0,r6 /* invalidate line */ + addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */ + bdnz ..dcloop + blr + +flush_dcache: + addis r9,r0,0x0002 /* set mask for EE and CE msr bits */ + ori r9,r9,0x8000 + mfmsr r12 /* save msr */ + andc r9,r12,r9 + mtmsr r9 /* disable EE and CE */ + addi r10,r0,0x0001 /* enable data cache for unused memory */ + mfdccr r9 /* region 0xF8000000-0xFFFFFFFF via */ + or r10,r10,r9 /* bit 31 in dccr */ + mtdccr r10 + + /* do loop for # of congruence classes. */ + addi r10,r0,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2) + addi r11,r0,(CFG_DCACHE_SIZE / 2) /* D cache set size - 2 way sets */ + mtctr r10 + addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */ + add r11,r10,r11 /* add to get to other side of cache line */ +..flush_dcache_loop: + lwz r3,0(r10) /* least recently used side */ + lwz r3,0(r11) /* the other side */ + dccci r0,r11 /* invalidate both sides */ + addi r10,r10,CFG_CACHELINE_SIZE /* bump to next line */ + addi r11,r11,CFG_CACHELINE_SIZE /* bump to next line */ + bdnz ..flush_dcache_loop + sync /* allow memory access to complete */ + mtdccr r9 /* restore dccr */ + mtmsr r12 /* restore msr */ + blr + + .globl icache_enable +icache_enable: + mflr r8 + bl invalidate_icache + mtlr r8 + isync + addis r3,r0, 0x8000 /* set bit 0 */ + mticcr r3 + blr + + .globl icache_disable +icache_disable: + addis r3,r0, 0x0000 /* clear bit 0 */ + mticcr r3 + isync + blr + + .globl icache_status +icache_status: + mficcr r3 + srwi r3, r3, 31 /* >>31 => select bit 0 */ + blr + + .globl dcache_enable +dcache_enable: + mflr r8 + bl invalidate_dcache + mtlr r8 + isync + addis r3,r0, 0x8000 /* set bit 0 */ + mtdccr r3 + blr + + .globl dcache_disable +dcache_disable: + mflr r8 + bl flush_dcache + mtlr r8 + addis r3,r0, 0x0000 /* clear bit 0 */ + mtdccr r3 + blr + + .globl dcache_status +dcache_status: + mfdccr r3 + srwi r3, r3, 31 /* >>31 => select bit 0 */ + blr + + .globl get_pvr +get_pvr: + mfspr r3, PVR + blr + +#if !defined(CONFIG_440) + .globl wr_pit +wr_pit: + mtspr pit, r3 + blr +#endif + + .globl wr_tcr +wr_tcr: + mtspr tcr, r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: ppcDcbf */ +/* Description: Data Cache block flush */ +/* Input: r3 = effective address */ +/* Output: none. */ +/*------------------------------------------------------------------------------- */ + .globl ppcDcbf +ppcDcbf: + dcbf r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: ppcDcbi */ +/* Description: Data Cache block Invalidate */ +/* Input: r3 = effective address */ +/* Output: none. */ +/*------------------------------------------------------------------------------- */ + .globl ppcDcbi +ppcDcbi: + dcbi r0,r3 + blr + +/*------------------------------------------------------------------------------- */ +/* Function: ppcSync */ +/* Description: Processor Synchronize */ +/* Input: none. */ +/* Output: none. */ +/*------------------------------------------------------------------------------- */ + .globl ppcSync +ppcSync: + sync + blr + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + mr r1, r3 /* Set new stack pointer */ + mr r9, r4 /* Save copy of Init Data pointer */ + mr r10, r5 /* Save copy of Destination Address */ + + mr r3, r5 /* Destination Address */ + lis r4, CFG_MONITOR_BASE@h /* Source Address */ + ori r4, r4, CFG_MONITOR_BASE@l + lwz r5, GOT(__init_end) + sub r5, r5, r4 + li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ + + /* + * Fix GOT pointer: + * + * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address + * + * Offset: + */ + sub r15, r10, r4 + + /* First our own GOT */ + add r14, r14, r15 + /* the the one used by the C code */ + add r30, r30, r15 + + /* + * Now relocate code + */ + + cmplw cr1,r3,r4 + addi r0,r5,3 + srwi. r0,r0,2 + beq cr1,4f /* In place copy is not necessary */ + beq 7f /* Protect against 0 count */ + mtctr r0 + bge cr1,2f + + la r8,-4(r4) + la r7,-4(r3) +1: lwzu r0,4(r8) + stwu r0,4(r7) + bdnz 1b + b 4f + +2: slwi r0,r0,2 + add r8,r4,r0 + add r7,r3,r0 +3: lwzu r0,-4(r8) + stwu r0,-4(r7) + bdnz 3b + +/* + * Now flush the cache: note that we must start from a cache aligned + * address. Otherwise we might miss one cache line. + */ +4: cmpwi r6,0 + add r5,r3,r5 + beq 7f /* Always flush prefetch queue in any case */ + subi r0,r6,1 + andc r3,r3,r0 + mr r4,r3 +5: dcbst 0,r4 + add r4,r4,r6 + cmplw r4,r5 + blt 5b + sync /* Wait for all dcbst to complete on bus */ + mr r4,r3 +6: icbi 0,r4 + add r4,r4,r6 + cmplw r4,r5 + blt 6b +7: sync /* Wait for all icbi to complete on bus */ + isync + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + + addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET + mtlr r0 + blr /* NEVER RETURNS! */ + +in_ram: + + /* + * Relocation Function, r14 point to got2+0x8000 + * + * Adjust got2 pointers, no need to check for 0, this code + * already puts a few entries in the table. + */ + li r0,__got2_entries@sectoff@l + la r3,GOT(_GOT2_TABLE_) + lwz r11,GOT(_GOT2_TABLE_) + mtctr r0 + sub r11,r3,r11 + addi r3,r3,-4 +1: lwzu r0,4(r3) + add r0,r0,r11 + stw r0,0(r3) + bdnz 1b + + /* + * Now adjust the fixups and the pointers to the fixups + * in case we need to move ourselves again. + */ +2: li r0,__fixup_entries@sectoff@l + lwz r3,GOT(_FIXUP_TABLE_) + cmpwi r0,0 + mtctr r0 + addi r3,r3,-4 + beq 4f +3: lwzu r4,4(r3) + lwzux r0,r4,r11 + add r0,r0,r11 + stw r10,0(r3) + stw r0,0(r4) + bdnz 3b +4: +clear_bss: + /* + * Now clear BSS segment + */ + lwz r3,GOT(__bss_start) + lwz r4,GOT(_end) + + cmplw 0, r3, r4 + beq 6f + + li r0, 0 +5: + stw r0, 0(r3) + addi r3, r3, 4 + cmplw 0, r3, r4 + bne 5b +6: + + mr r3, r9 /* Init Data pointer */ + mr r4, r10 /* Destination Address */ + bl board_init_r + + /* + * Copy exception vector code to low memory + * + * r3: dest_addr + * r7: source address, r8: end address, r9: target address + */ + .globl trap_init +trap_init: + lwz r7, GOT(_start) + lwz r8, GOT(_end_of_vectors) + + li r9, 0x100 /* reset vector always at 0x100 */ + + cmplw 0, r7, r8 + bgelr /* return if r7>=r8 - just in case */ + + mflr r4 /* save link register */ +1: + lwz r0, 0(r7) + stw r0, 0(r9) + addi r7, r7, 4 + addi r9, r9, 4 + cmplw 0, r7, r8 + bne 1b + + /* + * relocate `hdlr' and `int_return' entries + */ + li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET + li r8, Alignment - _start + EXC_OFF_SYS_RESET +2: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 2b + + li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET + bl trap_reloc + + li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET + bl trap_reloc + + li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET + li r8, SystemCall - _start + EXC_OFF_SYS_RESET +3: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 3b + + li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET + li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET +4: + bl trap_reloc + addi r7, r7, 0x100 /* next exception vector */ + cmplw 0, r7, r8 + blt 4b + + mtlr r4 /* restore link register */ + blr + + /* + * Function: relocate entries for one exception vector + */ +trap_reloc: + lwz r0, 0(r7) /* hdlr ... */ + add r0, r0, r3 /* ... += dest_addr */ + stw r0, 0(r7) + + lwz r0, 4(r7) /* int_return ... */ + add r0, r0, r3 /* ... += dest_addr */ + stw r0, 4(r7) + + blr + + +#ifdef CONFIG_405EP +ppc405ep_init: + /* + !----------------------------------------------------------------------- + ! Check FPGA for PCI internal/external arbitration + ! If board is set to internal arbitration, update cpc0_pci + !----------------------------------------------------------------------- + */ + addi r3,0,CPC0_PCI_HOST_CFG_EN +#ifdef CONFIG_BUBINGA405EP + addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */ + ori r5,r5,FPGA_REG1@l + lbz r5,0x0(r5) /* read to get PCI arb selection */ + andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/ + beq ..pci_cfg_set /* if not set, then bypass reg write*/ +#endif + ori r3,r3,CPC0_PCI_ARBIT_EN +..pci_cfg_set: + mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ + + /* + !----------------------------------------------------------------------- + ! Check to see if chip is in bypass mode. + ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a + ! CPU reset Otherwise, skip this step and keep going. + ! Note: Running BIOS in bypass mode is not supported since PLB speed + ! will not be fast enough for the SDRAM (min 66MHz) + !----------------------------------------------------------------------- + */ + mfdcr r5, CPC0_PLLMR1 + rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */ + cmpi cr0,0,r4,0x1 + + beq pll_done /* if SSCS =b'1' then PLL has */ + /* already been set */ + /* and CPU has been reset */ + /* so skip to next section */ + +#ifdef CONFIG_BUBINGA405EP + /* + !----------------------------------------------------------------------- + ! Read NVRAM to get value to write in PLLMR. + ! If value has not been correctly saved, write default value + ! Default config values (assuming on-board 33MHz SYS_CLK) are above. + ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above. + ! + ! WARNING: This code assumes the first three words in the nvram_t + ! structure in openbios.h. Changing the beginning of + ! the structure will break this code. + ! + !----------------------------------------------------------------------- + */ + addis r3,0,NVRAM_BASE@h + addi r3,r3,NVRAM_BASE@l + + lwz r4, 0(r3) + addis r5,0,NVRVFY1@h + addi r5,r5,NVRVFY1@l + cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/ + bne ..no_pllset + addi r3,r3,4 + lwz r4, 0(r3) + addis r5,0,NVRVFY2@h + addi r5,r5,NVRVFY2@l + cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */ + bne ..no_pllset + addi r3,r3,8 /* Skip over conf_size */ + lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */ + lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */ + rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */ + cmpi cr0,0,r5,1 /* See if PLL is locked */ + beq pll_write +..no_pllset: +#endif /* CONFIG_BUBINGA405EP */ + + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ + ori r3,r3,PLLMR0_DEFAULT@l /* */ + addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ + ori r4,r4,PLLMR1_DEFAULT@l /* */ + + b pll_write /* Write the CPC0_PLLMR with new value */ + +pll_done: + /* + !----------------------------------------------------------------------- + ! Clear Soft Reset Register + ! This is needed to enable PCI if not booting from serial EPROM + !----------------------------------------------------------------------- + */ + addi r3, 0, 0x0 + mtdcr CPC0_SRR, r3 + + addis r3,0,0x0010 + mtctr r3 +pci_wait: + bdnz pci_wait + + blr /* return to main code */ + +/* +!----------------------------------------------------------------------------- +! Function: pll_write +! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation +! That is: +! 1. Pll is first disabled (de-activated by putting in bypass mode) +! 2. PLL is reset +! 3. Clock dividers are set while PLL is held in reset and bypassed +! 4. PLL Reset is cleared +! 5. Wait 100us for PLL to lock +! 6. A core reset is performed +! Input: r3 = Value to write to CPC0_PLLMR0 +! Input: r4 = Value to write to CPC0_PLLMR1 +! Output r3 = none +!----------------------------------------------------------------------------- +*/ +pll_write: + mfdcr r5, CPC0_UCR + andis. r5,r5,0xFFFF + ori r5,r5,0x0101 /* Stop the UART clocks */ + mtdcr CPC0_UCR,r5 /* Before changing PLL */ + + mfdcr r5, CPC0_PLLMR1 + rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */ + mtdcr CPC0_PLLMR1,r5 + oris r5,r5,0x4000 /* Set PLL Reset */ + mtdcr CPC0_PLLMR1,r5 + + mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */ + rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */ + oris r5,r5,0x4000 /* Set PLL Reset */ + mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */ + rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */ + mtdcr CPC0_PLLMR1,r5 + + /* + ! Wait min of 100us for PLL to lock. + ! See CMOS 27E databook for more info. + ! At 200MHz, that means waiting 20,000 instructions + */ + addi r3,0,20000 /* 2000 = 0x4e20 */ + mtctr r3 +pll_wait: + bdnz pll_wait + + oris r5,r5,0x8000 /* Enable PLL */ + mtdcr CPC0_PLLMR1,r5 /* Engage */ + + /* + * Reset CPU to guarantee timings are OK + * Not sure if this is needed... + */ + addis r3,0,0x1000 + mtspr dbcr0,r3 /* This will cause a CPU core reset, and */ + /* execution will continue from the poweron */ + /* vector of 0xfffffffc */ +#endif /* CONFIG_405EP */ +#endif -- cgit v1.2.3