From 707fad0508ffabc6a5137e35d0248ccaa188dea9 Mon Sep 17 00:00:00 2001 From: Myles Watson Date: Fri, 23 Oct 2009 18:22:27 +0000 Subject: White space and comment fixes for cache_as_ram.inc files so it's easier to spot differences. Trivial. Signed-off-by: Myles Watson Acked-by: Myles Watson git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4827 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/amd/car/cache_as_ram.inc | 35 ++-- src/cpu/via/car/cache_as_ram.inc | 145 +++++++-------- src/cpu/x86/car/cache_as_ram.inc | 387 +++++++++++++++++++-------------------- 3 files changed, 284 insertions(+), 283 deletions(-) diff --git a/src/cpu/amd/car/cache_as_ram.inc b/src/cpu/amd/car/cache_as_ram.inc index dcd357438d..55209c57e5 100644 --- a/src/cpu/amd/car/cache_as_ram.inc +++ b/src/cpu/amd/car/cache_as_ram.inc @@ -31,7 +31,7 @@ #define jmp_if_k8(x) comisd %xmm2, %xmm1; jb x -#define CPUID_MASK 0x0ff00f00 +#define CPUID_MASK 0x0ff00f00 #define CPUID_VAL_FAM10_ROTATED 0x0f000010 #include @@ -127,13 +127,13 @@ CAR_FAM10_out: /* Erratum 343, RevGuide for Fam10h, Pub#41322 Rev. 3.33 */ /* read-address has to be stored in the ecx register */ - movl $MSR_FAM10, %ecx + movl $MSR_FAM10, %ecx /* execute special read command for msr-register. Result is then in the EDX:EAX-registers (MSBs in EDX) */ rdmsr /* Set bit 35 to 1 in EAX */ - bts $35, %eax + bts $35, %eax /* write back the modified register EDX:EAX to the MSR specified in ECX */ wrmsr @@ -157,13 +157,13 @@ enable_fixed_mtrr_dram_modify: clear_fixed_var_mtrr: lodsl (%esi), %eax testl %eax, %eax - jz clear_fixed_var_mtrr_out + jz clear_fixed_var_mtrr_out movl %eax, %ecx xorl %eax, %eax wrmsr - jmp clear_fixed_var_mtrr + jmp clear_fixed_var_mtrr clear_fixed_var_mtrr_out: /* 0x06 is the WB IO type for a given 4k segment. @@ -231,15 +231,15 @@ clear_fixed_var_mtrr_out: #error Invalid CAR size, is not a multiple of 4k. This is a processor limitation. #endif -#if CacheSize > 0x8000 - /* enable caching for 32K-64K using fixed mtrr */ - movl $0x268, %ecx /* fix4k_c0000*/ +#if CacheSize > 0x8000 + /* enable caching for 32K-64K using fixed mtrr */ + movl $0x268, %ecx /* fix4k_c0000*/ simplemask CacheSize, 0x8000 - wrmsr + wrmsr #endif - /* enable caching for 0-32K using fixed mtrr */ - movl $0x269, %ecx /* fix4k_c8000*/ + /* enable caching for 0-32K using fixed mtrr */ + movl $0x269, %ecx /* fix4k_c8000*/ simplemask CacheSize, 0 wrmsr @@ -253,7 +253,7 @@ clear_fixed_var_mtrr_out: #if ((CONFIG_HAVE_FAILOVER_BOOT == 1) && (CONFIG_USE_FAILOVER_IMAGE == 0)) || ((CONFIG_HAVE_FAILOVER_BOOT == 0) && (CONFIG_USE_FALLBACK_IMAGE == 0)) /* disable cache */ movl %cr0, %eax - orl $(1 << 30),%eax + orl $(0x1 << 30), %eax movl %eax, %cr0 #endif @@ -287,7 +287,7 @@ wbcache_post_fam10_setup: /* Enable the MTRRs and IORRs in SYSCFG */ movl $SYSCFG_MSR, %ecx rdmsr - orl $(SYSCFG_MSR_MtrrVarDramEn | SYSCFG_MSR_MtrrFixDramEn), %eax + orl $(SYSCFG_MSR_MtrrVarDramEn | SYSCFG_MSR_MtrrFixDramEn), %eax wrmsr #endif @@ -312,16 +312,17 @@ fam10_end_part1: outb %al, $0x80 #if ((CONFIG_HAVE_FAILOVER_BOOT == 1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT == 0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - /* Read the range with lodsl*/ + /* Read the range with lodsl*/ cld movl $CacheBase, %esi movl $(CacheSize >> 2), %ecx - rep lodsl + rep lodsl + /* Clear the range */ movl $CacheBase, %edi movl $(CacheSize >> 2), %ecx xorl %eax, %eax - rep stosl + rep stosl #endif /*CONFIG_USE_FAILOVER_IMAGE == 1*/ @@ -395,7 +396,7 @@ CAR_FAM10_ap_out: call cache_as_ram_main /* We will not go back */ - movb $0xAF, %al /* Should never see this postcode */ + movb $0xAF, %al /* Should never see this postcode */ outb %al, $0x80 fixed_mtrr_msr: diff --git a/src/cpu/via/car/cache_as_ram.inc b/src/cpu/via/car/cache_as_ram.inc index 3e5729aa1f..f59596d171 100644 --- a/src/cpu/via/car/cache_as_ram.inc +++ b/src/cpu/via/car/cache_as_ram.inc @@ -1,6 +1,6 @@ -/* +/* * This file is part of the coreboot project. - * + * * Copyright (C) 2000,2007 Ronald G. Minnich * Copyright (C) 2005 Eswar Nallusamy, LANL * Copyright (C) 2005 Tyan @@ -10,153 +10,154 @@ * Copyright (C) 2007,2008 Carl-Daniel Hailfinger * Copyright (C) 2008 VIA Technologies, Inc. * (Written by Jason Zhao for VIA) - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#define CacheSize CONFIG_DCACHE_RAM_SIZE -#define CacheBase CONFIG_DCACHE_RAM_BASE +#define CacheSize CONFIG_DCACHE_RAM_SIZE +#define CacheBase CONFIG_DCACHE_RAM_BASE -#include +#include /* Save the BIST result */ - movl %eax, %ebp + movl %eax, %ebp CacheAsRam: /* disable cache */ - movl %cr0, %eax - orl $(0x1<<30),%eax - movl %eax,%cr0 + movl %cr0, %eax + orl $(0x1<<30),%eax + movl %eax,%cr0 invd /* Set the default memory type and enable fixed and variable MTRRs */ - movl $MTRRdefType_MSR, %ecx - xorl %edx, %edx + movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx /* Enable Variable and Fixed MTRRs */ - movl $0x00000c00, %eax + movl $0x00000c00, %eax wrmsr /* Clear all MTRRs */ - xorl %edx, %edx - movl $fixed_mtrr_msr, %esi + xorl %edx, %edx + movl $fixed_mtrr_msr, %esi + clear_fixed_var_mtrr: - lodsl (%esi), %eax - testl %eax, %eax - jz clear_fixed_var_mtrr_out + lodsl (%esi), %eax + testl %eax, %eax + jz clear_fixed_var_mtrr_out - movl %eax, %ecx - xorl %eax, %eax + movl %eax, %ecx + xorl %eax, %eax wrmsr - jmp clear_fixed_var_mtrr + jmp clear_fixed_var_mtrr clear_fixed_var_mtrr_out: /* MTRRPhysBase */ - movl $0x200, %ecx - xorl %edx, %edx - movl $(CacheBase|MTRR_TYPE_WRBACK),%eax + movl $0x200, %ecx + xorl %edx, %edx + movl $(CacheBase|MTRR_TYPE_WRBACK),%eax wrmsr /* MTRRPhysMask */ - movl $0x201, %ecx + movl $0x201, %ecx /* This assumes we never access addresses above 2^36 in CAR. */ - movl $0x0000000f,%edx - movl $(~(CacheSize-1)|0x800),%eax + movl $0x0000000f,%edx + movl $(~(CacheSize-1)|0x800),%eax wrmsr - /* enable write base caching so we can do execute in place - * on the flash rom. - */ + /* enable write base caching so we can do execute in place + * on the flash rom. + */ /* MTRRPhysBase */ - movl $0x202, %ecx - xorl %edx, %edx - movl $(CONFIG_XIP_ROM_BASE|MTRR_TYPE_WRBACK),%eax + movl $0x202, %ecx + xorl %edx, %edx + movl $(CONFIG_XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax wrmsr /* MTRRPhysMask */ - movl $0x203, %ecx - movl $0x0000000f,%edx - movl $(~(CONFIG_XIP_ROM_SIZE - 1) | 0x800), %eax + movl $0x203, %ecx + movl $0x0000000f, %edx + movl $(~(CONFIG_XIP_ROM_SIZE - 1) | 0x800), %eax wrmsr - - movl $MTRRdefType_MSR, %ecx - xorl %edx, %edx + movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx /* Enable Variable and Fixed MTRRs */ - movl $0x00000800, %eax + movl $0x00000800, %eax wrmsr - movl %cr0, %eax - andl $0x9fffffff,%eax - movl %eax, %cr0 + movl %cr0, %eax + andl $0x9fffffff, %eax + movl %eax, %cr0 /* Read the range with lodsl*/ cld - movl $CacheBase, %esi - movl %esi, %edi - movl $(CacheSize>>2), %ecx - rep lodsl + movl $CacheBase, %esi + movl %esi, %edi + movl $(CacheSize>>2), %ecx + rep lodsl - movl $CacheBase, %esi - movl %esi, %edi - movl $(CacheSize>>2), %ecx + movl $CacheBase, %esi + movl %esi, %edi + movl $(CacheSize >> 2), %ecx /* 0x5c5c5c5c is a memory test pattern. - * TODO: Check if everything works with the zero pattern as well. */ - /*xorl %eax, %eax*/ - xorl $0x5c5c5c5c,%eax - rep stosl + * TODO: Check if everything works with the zero pattern as well. */ + /*xorl %eax, %eax*/ + xorl $0x5c5c5c5c,%eax + rep stosl - movl CONFIG_XIP_ROM_BASE, %esi - movl %esi, %edi - movl $(CONFIG_XIP_ROM_SIZE>>2), %ecx - rep lodsl + movl CONFIG_XIP_ROM_BASE, %esi + movl %esi, %edi + movl $(CONFIG_XIP_ROM_SIZE>>2), %ecx + rep lodsl /* The key point of this CAR code is C7 cache does not turn into * "no fill" mode, which is not compatible with general CAR code. */ - movl $(CacheBase+CacheSize-4), %eax - movl %eax, %esp + movl $(CacheBase + CacheSize - 4), %eax + movl %eax, %esp #ifdef CARTEST testok: movb $0x40,%al outb %al, $0x80 - xorl %edx, %edx - xorl %eax, %eax - movl $0x5c5c,%edx + xorl %edx, %edx + xorl %eax, %eax + movl $0x5c5c,%edx pushl %edx pushl %edx pushl %edx pushl %edx pushl %edx - popl %esi - popl %esi - popl %eax - popl %eax - popl %eax + popl %esi + popl %esi + popl %eax + popl %eax + popl %eax cmpl %edx,%eax jne stackerr #endif /* Restore the BIST result */ movl %ebp, %eax + /* We need to set ebp ? No need */ movl %esp, %ebp - pushl %eax /* bist */ - call amd64_main + pushl %eax /* bist */ + call amd64_main /* We will not go back */ fixed_mtrr_msr: diff --git a/src/cpu/x86/car/cache_as_ram.inc b/src/cpu/x86/car/cache_as_ram.inc index 4f1ae86af0..5c616c52fa 100644 --- a/src/cpu/x86/car/cache_as_ram.inc +++ b/src/cpu/x86/car/cache_as_ram.inc @@ -1,6 +1,6 @@ -/* +/* * This file is part of the coreboot project. - * + * * Copyright (C) 2000,2007 Ronald G. Minnich * Copyright (C) 2005 Eswar Nallusamy, LANL * Copyright (C) 2005 Tyan @@ -8,16 +8,16 @@ * Copyright (C) 2007 coresystems GmbH * (Written by Stefan Reinauer for coresystems GmbH) * Copyright (C) 2007 Carl-Daniel Hailfinger - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA @@ -28,107 +28,107 @@ /* other's is the same as AMD except remove amd specific msr */ #define CacheSize CONFIG_DCACHE_RAM_SIZE -#define CacheBase (0xd0000 - CacheSize) +#define CacheBase (0xd0000 - CacheSize) #include /* Save the BIST result */ - movl %eax, %ebp + movl %eax, %ebp CacheAsRam: /* hope we can skip the double set for normal part */ #if CONFIG_USE_FALLBACK_IMAGE == 1 - // Check whether the processor has HT capability - movl $01, %eax - cpuid - btl $28, %edx - jnc NotHtProcessor - bswapl %ebx - cmpb $01, %bh - jbe NotHtProcessor - - // It is a HT processor; Send SIPI to the other logical processor - // within this processor so that the CAR related common system registers - // are programmed accordingly - - // Use some register that is common to both logical processors - // as semaphore. Refer Appendix B, Vol.3 - xorl %eax, %eax - xorl %edx, %edx - movl $0x250, %ecx - wrmsr - - // Figure out the logical AP's APIC ID; the following logic will work - // only for processors with 2 threads - // Refer to Vol 3. Table 7-1 for details about this logic - movl $0xFEE00020, %esi - movl (%esi), %ebx - andl $0xFF000000, %ebx - bswapl %ebx - btl $0, %ebx - jnc LogicalAP0 - andb $0xFE, %bl - jmp Send_SIPI + // Check whether the processor has HT capability + movl $01, %eax + cpuid + btl $28, %edx + jnc NotHtProcessor + bswapl %ebx + cmpb $01, %bh + jbe NotHtProcessor + + // It is a HT processor; Send SIPI to the other logical processor + // within this processor so that the CAR related common system registers + // are programmed accordingly + + // Use some register that is common to both logical processors + // as semaphore. Refer Appendix B, Vol.3 + xorl %eax, %eax + xorl %edx, %edx + movl $0x250, %ecx + wrmsr + + // Figure out the logical AP's APIC ID; the following logic will work + // only for processors with 2 threads + // Refer to Vol 3. Table 7-1 for details about this logic + movl $0xFEE00020, %esi + movl (%esi), %ebx + andl $0xFF000000, %ebx + bswapl %ebx + btl $0, %ebx + jnc LogicalAP0 + andb $0xFE, %bl + jmp Send_SIPI LogicalAP0: - orb $0x01, %bl + orb $0x01, %bl Send_SIPI: - bswapl %ebx // ebx - logical AP's APIC ID + bswapl %ebx // ebx - logical AP's APIC ID - // Fill up the IPI command registers in the Local APIC mapped to default address - // and issue SIPI to the other logical processor within this processor die. + // Fill up the IPI command registers in the Local APIC mapped to default address + // and issue SIPI to the other logical processor within this processor die. Retry_SIPI: - movl %ebx, %eax - movl $0xFEE00310, %esi - movl %eax, (%esi) + movl %ebx, %eax + movl $0xFEE00310, %esi + movl %eax, (%esi) - // SIPI vector - F900:0000 - movl $0x000006F9, %eax - movl $0xFEE00300, %esi - movl %eax, (%esi) + // SIPI vector - F900:0000 + movl $0x000006F9, %eax + movl $0xFEE00300, %esi + movl %eax, (%esi) - movl $0x30, %ecx + movl $0x30, %ecx SIPI_Delay: - pause - decl %ecx - jnz SIPI_Delay + pause + decl %ecx + jnz SIPI_Delay - movl (%esi), %eax - andl $0x00001000, %eax - jnz Retry_SIPI + movl (%esi), %eax + andl $0x00001000, %eax + jnz Retry_SIPI - // Wait for the Logical AP to complete initialization + // Wait for the Logical AP to complete initialization LogicalAP_SIPINotdone: - movl $0x250, %ecx - rdmsr - orl %eax, %eax - jz LogicalAP_SIPINotdone + movl $0x250, %ecx + rdmsr + orl %eax, %eax + jz LogicalAP_SIPINotdone NotHtProcessor: #if 1 - /* Set the default memory type and enable fixed and variable MTRRs */ - movl $MTRRdefType_MSR, %ecx - xorl %edx, %edx - /* Enable Variable and Fixed MTRRs */ - movl $0x00000c00, %eax - wrmsr + /* Set the default memory type and enable fixed and variable MTRRs */ + movl $MTRRdefType_MSR, %ecx + xorl %edx, %edx + /* Enable Variable and Fixed MTRRs */ + movl $0x00000c00, %eax + wrmsr #endif - /*Clear all MTRRs */ + /* Clear all MTRRs */ + xorl %edx, %edx + movl $fixed_mtrr_msr, %esi - xorl %edx, %edx - movl $fixed_mtrr_msr, %esi clear_fixed_var_mtrr: - lodsl (%esi), %eax - testl %eax, %eax - jz clear_fixed_var_mtrr_out + lodsl (%esi), %eax + testl %eax, %eax + jz clear_fixed_var_mtrr_out - movl %eax, %ecx - xorl %eax, %eax - wrmsr + movl %eax, %ecx + xorl %eax, %eax + wrmsr - jmp clear_fixed_var_mtrr + jmp clear_fixed_var_mtrr clear_fixed_var_mtrr_out: /* 0x06 is the WB IO type for a given 4k segment. @@ -144,13 +144,13 @@ clear_fixed_var_mtrr_out: */ xorl \reg, \reg .elseif \segs == 1 - movl $0x06000000, \reg + movl $0x06000000, \reg /* WB IO type */ .elseif \segs == 2 - movl $0x06060000, \reg + movl $0x06060000, \reg /* WB IO type */ .elseif \segs == 3 - movl $0x06060600, \reg + movl $0x06060600, \reg /* WB IO type */ .elseif \segs >= 4 - movl $0x06060606, \reg + movl $0x06060606, \reg /* WB IO type */ .endif .endm @@ -179,170 +179,169 @@ clear_fixed_var_mtrr_out: #error Invalid CAR size, is not a multiple of 4k. This is a processor limitation. #endif -#if CacheSize > 0x8000 - /* enable caching for 32K-64K using fixed mtrr */ - movl $0x268, %ecx /* fix4k_c0000*/ +#if CacheSize > 0x8000 + /* enable caching for 32K-64K using fixed mtrr */ + movl $0x268, %ecx /* fix4k_c0000*/ simplemask CacheSize, 0x8000 - wrmsr + wrmsr #endif - /* enable caching for 0-32K using fixed mtrr */ - movl $0x269, %ecx /* fix4k_c8000*/ + /* enable caching for 0-32K using fixed mtrr */ + movl $0x269, %ecx /* fix4k_c8000*/ simplemask CacheSize, 0 wrmsr #else - /* disable cache */ - movl %cr0, %eax - orl $(0x1<<30),%eax - movl %eax, %cr0 + /* disable cache */ + movl %cr0, %eax + orl $(0x1 << 30), %eax + movl %eax, %cr0 #endif /* CONFIG_USE_FALLBACK_IMAGE == 1*/ #if defined(CONFIG_XIP_ROM_SIZE) && defined(CONFIG_XIP_ROM_BASE) - /* enable write base caching so we can do execute in place - * on the flash rom. - */ - movl $0x202, %ecx - xorl %edx, %edx - movl $(CONFIG_XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax - wrmsr - - movl $0x203, %ecx - movl $0x0000000f, %edx - movl $(~(CONFIG_XIP_ROM_SIZE - 1) | 0x800), %eax - wrmsr + /* enable write base caching so we can do execute in place + * on the flash rom. + */ + movl $0x202, %ecx + xorl %edx, %edx + movl $(CONFIG_XIP_ROM_BASE | MTRR_TYPE_WRBACK), %eax + wrmsr + + movl $0x203, %ecx + movl $0x0000000f, %edx + movl $(~(CONFIG_XIP_ROM_SIZE - 1) | 0x800), %eax + wrmsr #endif /* CONFIG_XIP_ROM_SIZE && CONFIG_XIP_ROM_BASE */ - /* enable cache */ - movl %cr0, %eax - andl $0x9fffffff,%eax - movl %eax, %cr0 + /* enable cache */ + movl %cr0, %eax + andl $0x9fffffff, %eax + movl %eax, %cr0 #if CONFIG_USE_FALLBACK_IMAGE == 1 /* Read the range with lodsl*/ - movl $CacheBase, %esi + movl $CacheBase, %esi cld - movl $(CacheSize>>2), %ecx - rep lodsl + movl $(CacheSize >> 2), %ecx + rep lodsl /* Clear the range */ - movl $CacheBase, %edi - movl $(CacheSize>>2), %ecx - xorl %eax, %eax - rep stosl + movl $CacheBase, %edi + movl $(CacheSize >> 2), %ecx + xorl %eax, %eax + rep stosl #if 0 /* check the cache as ram */ - movl $CacheBase, %esi - movl $(CacheSize>>2), %ecx -.xin1: - movl %esi, %eax - movl %eax, (%esi) - decl %ecx - je .xout1 - add $4, %esi - jmp .xin1 -.xout1: - - movl $CacheBase, %esi + movl $CacheBase, %esi + movl $(CacheSize>>2), %ecx +.xin1: + movl %esi, %eax + movl %eax, (%esi) + decl %ecx + je .xout1 + add $4, %esi + jmp .xin1 +.xout1: + + movl $CacheBase, %esi // movl $(CacheSize>>2), %ecx movl $4, %ecx .xin1x: - movl %esi, %eax - - movl $0x4000, %edx - movb %ah, %al -.testx1: - outb %al, $0x80 - decl %edx - jnz .testx1 - - movl (%esi), %eax - cmpb 0xff, %al - je .xin2 /* dont show */ - - movl $0x4000, %edx + movl %esi, %eax + + movl $0x4000, %edx + movb %ah, %al +.testx1: + outb %al, $0x80 + decl %edx + jnz .testx1 + + movl (%esi), %eax + cmpb 0xff, %al + je .xin2 /* dont show */ + + movl $0x4000, %edx .testx2: - outb %al, $0x80 - decl %edx - jnz .testx2 - + outb %al, $0x80 + decl %edx + jnz .testx2 + .xin2: decl %ecx - je .xout1x - add $4, %esi - jmp .xin1x + je .xout1x + add $4, %esi + jmp .xin1x .xout1x: #endif #endif /*CONFIG_USE_FALLBACK_IMAGE == 1*/ - movl $(CacheBase+CacheSize-4), %eax - movl %eax, %esp + movl $(CacheBase + CacheSize - 4), %eax + movl %eax, %esp /* Load a different set of data segments */ #if CONFIG_USE_INIT - movw $CACHE_RAM_DATA_SEG, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %ss + movw $CACHE_RAM_DATA_SEG, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss #endif lout: - /* Restore the BIST result */ movl %ebp, %eax + /* We need to set ebp ? No need */ movl %esp, %ebp - pushl %eax /* bist */ - call amd64_main + pushl %eax /* bist */ + call amd64_main /* We will not go back */ - -fixed_mtrr_msr: - .long 0x250, 0x258, 0x259 - .long 0x268, 0x269, 0x26A - .long 0x26B, 0x26C, 0x26D - .long 0x26E, 0x26F -var_mtrr_msr: - .long 0x200, 0x201, 0x202, 0x203 - .long 0x204, 0x205, 0x206, 0x207 - .long 0x208, 0x209, 0x20A, 0x20B - .long 0x20C, 0x20D, 0x20E, 0x20F - .long 0x000 /* NULL, end of table */ +fixed_mtrr_msr: + .long 0x250, 0x258, 0x259 + .long 0x268, 0x269, 0x26A + .long 0x26B, 0x26C, 0x26D + .long 0x26E, 0x26F +var_mtrr_msr: + .long 0x200, 0x201, 0x202, 0x203 + .long 0x204, 0x205, 0x206, 0x207 + .long 0x208, 0x209, 0x20A, 0x20B + .long 0x20C, 0x20D, 0x20E, 0x20F + .long 0x000 /* NULL, end of table */ #if CONFIG_USE_FALLBACK_IMAGE == 1 - .align 0x1000 - .code16 + .align 0x1000 + .code16 .global LogicalAP_SIPI LogicalAP_SIPI: - // cr0 register is shared among the logical processors; - // so clear CD & NW bits so that the BSP's cr0 register - // controls the cache behavior - // Note: The cache behavior is determined by "OR" result - // of the cr0 registers of the logical processors - - movl %cr0, %eax - andl $0x9FFFFFFF, %eax - movl %eax, %cr0 - - finit - - // Set the semaphore to indicate the Logical AP is done - // with CAR specific initialization - movl $0x250, %ecx - movl $0x06, %eax - xorl %edx, %edx - wrmsr - - // Halt this AP - cli + // cr0 register is shared among the logical processors; + // so clear CD & NW bits so that the BSP's cr0 register + // controls the cache behavior + // Note: The cache behavior is determined by "OR" result + // of the cr0 registers of the logical processors + + movl %cr0, %eax + andl $0x9FFFFFFF, %eax + movl %eax, %cr0 + + finit + + // Set the semaphore to indicate the Logical AP is done + // with CAR specific initialization + movl $0x250, %ecx + movl $0x06, %eax + xorl %edx, %edx + wrmsr + + // Halt this AP + cli Halt_LogicalAP: - hlt - jmp Halt_LogicalAP - .code32 + hlt + jmp Halt_LogicalAP + .code32 #endif /*CONFIG_USE_FALLBACK_IMAGE == 1*/ .CacheAsRam_out: -- cgit v1.2.3