From 6de6571f1c362c43dbfd04c79d1ddedcb953c724 Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Tue, 7 Aug 2018 12:12:58 +0200 Subject: src/superio: Fix typo and remove unneeded whitespace Change-Id: Iadc28d1632aa9b7d0b028c229049a348d5c07882 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/27875 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Martin Roth --- src/superio/ite/it8772f/it8772f.h | 2 +- src/superio/smsc/sio1036/sio1036.h | 2 +- src/superio/smsc/sio1036/sio1036_early_init.c | 26 +++++++++++++------------- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h index ec210a8bec..91d107a9a2 100644 --- a/src/superio/ite/it8772f/it8772f.h +++ b/src/superio/ite/it8772f/it8772f.h @@ -120,7 +120,7 @@ enum thermal_mode { /* GPIO Inernal Pull-up: 1: Enable, 0: Disable */ #define GPIO_REG_PULLUP(x) (0xb8 + (x)) -/* GPIO Fucntion Select: 1: Simple I/O, 0: Alternate function */ +/* GPIO Function Select: 1: Simple I/O, 0: Alternate function */ #define GPIO_REG_ENABLE(x) (0xc0 + (x)) /* GPIO Mode: 0: input mode, 1: output mode */ diff --git a/src/superio/smsc/sio1036/sio1036.h b/src/superio/smsc/sio1036/sio1036.h index 37ef041aec..683dcd113e 100644 --- a/src/superio/smsc/sio1036/sio1036.h +++ b/src/superio/smsc/sio1036/sio1036.h @@ -20,7 +20,7 @@ #define UART_POWER_DOWN (1 << 7) #define LPT_POWER_DOWN (1 << 2) -#define IR_OUPUT_MUX (1 << 6) +#define IR_OUTPUT_MUX (1 << 6) #include #include diff --git a/src/superio/smsc/sio1036/sio1036_early_init.c b/src/superio/smsc/sio1036/sio1036_early_init.c index b01151061c..1f2c9f2e5c 100644 --- a/src/superio/smsc/sio1036/sio1036_early_init.c +++ b/src/superio/smsc/sio1036/sio1036_early_init.c @@ -38,8 +38,8 @@ static u8 detect_sio1036_chip(unsigned port) pnp_devfn_t dev = PNP_DEV(port, SIO1036_SP1); unsigned data; - sio1036_enter_conf_state (dev); - data = pnp_read_config (dev, 0x0D); + sio1036_enter_conf_state(dev); + data = pnp_read_config(dev, 0x0D); sio1036_exit_conf_state(dev); /* Detect SMSC SIO1036 chip */ @@ -59,37 +59,37 @@ void sio1036_enable_serial(pnp_devfn_t dev, u16 iobase) if (detect_sio1036_chip(port) != 0) return; - sio1036_enter_conf_state (dev); + sio1036_enter_conf_state(dev); /* Enable SMSC UART 0 */ /* Valid configuration cycle */ - pnp_write_config (dev, 0x00, 0x28); + pnp_write_config(dev, 0x00, 0x28); /* PP power/mode/cr lock */ - pnp_write_config (dev, 0x01, 0x98 | LPT_POWER_DOWN); - pnp_write_config (dev, 0x02, 0x08 | UART_POWER_DOWN); + pnp_write_config(dev, 0x01, 0x98 | LPT_POWER_DOWN); + pnp_write_config(dev, 0x02, 0x08 | UART_POWER_DOWN); /*Auto power management*/ - pnp_write_config (dev, 0x07, 0x00 ); + pnp_write_config(dev, 0x07, 0x00); /*ECP FIFO threhod */ - pnp_write_config (dev, 0x0A, 0x00 | IR_OUPUT_MUX); + pnp_write_config(dev, 0x0A, 0x00 | IR_OUTPUT_MUX); /*GPIO direction register 2 */ - pnp_write_config (dev, 0x033, 0x00); + pnp_write_config(dev, 0x033, 0x00); /*UART Mode */ - pnp_write_config (dev, 0x0C, 0x02); + pnp_write_config(dev, 0x0C, 0x02); /* GPIO polarity regisgter 2 */ - pnp_write_config (dev, 0x034, 0x00); + pnp_write_config(dev, 0x034, 0x00); /* Enable SMSC UART 0 */ /*Set base io address */ - pnp_write_config (dev, 0x25, (u8)(iobase >> 2)); + pnp_write_config(dev, 0x25, (u8)(iobase >> 2)); /* Set UART IRQ onto 0x04 */ - pnp_write_config (dev, 0x28, 0x04); + pnp_write_config(dev, 0x28, 0x04); sio1036_exit_conf_state(dev); } -- cgit v1.2.3