From 69f0289608c983ba187e4dc479fbdd27855cbab2 Mon Sep 17 00:00:00 2001 From: Seunghwan Kim Date: Thu, 10 Aug 2023 10:27:18 +0900 Subject: mb/google/nissa/var/pirrha: Update device configurations Based on schematics and gpio table of pirrha, generate overridetree.cb to configure internal devices and generate fw_config.c to override GPIO configurations following FW_CONFIG. BUG=b:292134655 TEST=FW_NAME=pirrha emerge-nissa coreboot chromeos-bootimage Change-Id: I91013b0ad89e26f0a4c433c305c6b883d000f042 Signed-off-by: Seunghwan Kim Reviewed-on: https://review.coreboot.org/c/coreboot/+/77116 Reviewed-by: Jamie Chen Tested-by: build bot (Jenkins) Reviewed-by: Jimmy Su Reviewed-by: Derek Huang --- .../google/brya/variants/pirrha/Makefile.inc | 1 + .../google/brya/variants/pirrha/fw_config.c | 81 ++++ .../google/brya/variants/pirrha/overridetree.cb | 532 ++++++++++++++++++++- 3 files changed, 612 insertions(+), 2 deletions(-) create mode 100644 src/mainboard/google/brya/variants/pirrha/fw_config.c diff --git a/src/mainboard/google/brya/variants/pirrha/Makefile.inc b/src/mainboard/google/brya/variants/pirrha/Makefile.inc index 227b163fc8..bc560b8f1d 100644 --- a/src/mainboard/google/brya/variants/pirrha/Makefile.inc +++ b/src/mainboard/google/brya/variants/pirrha/Makefile.inc @@ -3,4 +3,5 @@ bootblock-y += gpio.c romstage-y += memory.c +ramstage-$(CONFIG_FW_CONFIG) += fw_config.c ramstage-y += gpio.c diff --git a/src/mainboard/google/brya/variants/pirrha/fw_config.c b/src/mainboard/google/brya/variants/pirrha/fw_config.c new file mode 100644 index 0000000000..2ec0659555 --- /dev/null +++ b/src/mainboard/google/brya/variants/pirrha/fw_config.c @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include +#include +#include +#include +#include + +static const struct pad_config wfc_disable_pads[] = { + /* D3 : WCAM_RST_L */ + PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG), + /* D15 : EN_PP2800_WCAM_X */ + PAD_NC_LOCK(GPP_D15, NONE, LOCK_CONFIG), + /* D16 : EN_PP1800_PP1200_WCAM_X */ + PAD_NC_LOCK(GPP_D16, NONE, LOCK_CONFIG), + /* H22 : WCAM_MCLK_R */ + PAD_NC(GPP_H22, NONE), + /* R6 : DMIC_WCAM_CLK_R */ + PAD_NC(GPP_R6, NONE), + /* R7 : DMIC_WCAM_DATA */ + PAD_NC(GPP_R7, NONE), +}; + +static const struct pad_config emmc_disable_pads[] = { + /* I7 : EMMC_CMD */ + PAD_NC(GPP_I7, NONE), + /* I8 : EMMC_D0 */ + PAD_NC(GPP_I8, NONE), + /* I9 : EMMC_D1 */ + PAD_NC(GPP_I9, NONE), + /* I10 : EMMC_D2 */ + PAD_NC(GPP_I10, NONE), + /* I11 : EMMC_D3 */ + PAD_NC(GPP_I11, NONE), + /* I12 : EMMC_D4 */ + PAD_NC(GPP_I12, NONE), + /* I13 : EMMC_D5 */ + PAD_NC(GPP_I13, NONE), + /* I14 : EMMC_D6 */ + PAD_NC(GPP_I14, NONE), + /* I15 : EMMC_D7 */ + PAD_NC(GPP_I15, NONE), + /* I16 : EMMC_RCLK */ + PAD_NC(GPP_I16, NONE), + /* I17 : EMMC_CLK */ + PAD_NC(GPP_I17, NONE), + /* I18 : EMMC_RST_L */ + PAD_NC(GPP_I18, NONE), +}; + +static const struct pad_config stylus_disable_pads[] = { + /* F13 : SOC_PEN_DETECT_R_ODL */ + PAD_NC_LOCK(GPP_F13, NONE, LOCK_CONFIG), + /* F15 : SOC_PEN_DETECT_ODL */ + PAD_NC_LOCK(GPP_F15, NONE, LOCK_CONFIG), +}; + +void fw_config_gpio_padbased_override(struct pad_config *padbased_table) +{ + // Skip checking FW config if board ID in CBI is not verified. + if (board_id() == BOARD_ID_UNKNOWN) + return; + + if (fw_config_probe(FW_CONFIG(WFC, WFC_ABSENT))) { + printk(BIOS_INFO, "Disable MIPI WFC GPIO pins.\n"); + gpio_padbased_override(padbased_table, wfc_disable_pads, + ARRAY_SIZE(wfc_disable_pads)); + } + + if (!fw_config_probe(FW_CONFIG(STORAGE, STORAGE_EMMC))) { + printk(BIOS_INFO, "Disable eMMC SSD GPIO pins.\n"); + gpio_padbased_override(padbased_table, emmc_disable_pads, + ARRAY_SIZE(emmc_disable_pads)); + } + + if (fw_config_probe(FW_CONFIG(STYLUS, STYLUS_ABSENT))) { + printk(BIOS_INFO, "Disable Stylus GPIO pins.\n"); + gpio_padbased_override(padbased_table, stylus_disable_pads, + ARRAY_SIZE(stylus_disable_pads)); + } +} diff --git a/src/mainboard/google/brya/variants/pirrha/overridetree.cb b/src/mainboard/google/brya/variants/pirrha/overridetree.cb index 4f2c04a57a..50f37ba188 100644 --- a/src/mainboard/google/brya/variants/pirrha/overridetree.cb +++ b/src/mainboard/google/brya/variants/pirrha/overridetree.cb @@ -1,6 +1,534 @@ +fw_config + field DB_USB 0 1 + option DB_NONE 0 + option DB_1C_1A 1 + option DB_1C_LTE 2 + end + field WFC 2 + option WFC_MIPI_OV8856 0 + option WFC_ABSENT 1 + end + field STYLUS 3 + option STYLUS_PRESENT 0 + option STYLUS_ABSENT 1 + end +end + chip soc/intel/alderlake + # GPE configuration + register "pmc_gpe0_dw1" = "GPP_C" + + # Enable MIPI DSI on DDI port A + register "ddi_portA_config" = "2" # MIPI DSI + + register "sagv" = "SaGv_Enabled" + + # SOC Aux orientation override: + # This is a bitfield that corresponds to up to 4 TCSS ports. + # Bits (0,1) allocated for TCSS Port1 configuration and Bits (2,3)for TCSS Port2. + # TcssAuxOri = 0101b + # Bit0,Bit2 set to "1" indicates no retimer on USBC Ports + # Bit1,Bit3 set to "0" indicates Aux lines are not swapped on the + # motherboard to USBC connector + register "tcss_aux_ori" = "5" + + register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}" + register "typec_aux_bias_pads[1]" = "{.pad_auxp_dc = GPP_A21, .pad_auxn_dc = GPP_A22}" + + register "usb2_ports[0]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .pre_emp_bias = USB2_BIAS_28P15MV, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, + .type_c = 1, + }" # USB2_C0 + register "usb2_ports[1]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .pre_emp_bias = USB2_BIAS_28P15MV, + .tx_bias = USB2_BIAS_11P25MV, + .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, + .type_c = 1, + }" # USB2_C1 + register "usb2_ports[3]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .pre_emp_bias = USB2_BIAS_28P15MV, + .tx_bias = USB2_BIAS_11P25MV, + .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, + }" # USB2_A0 + register "usb2_ports[4]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .pre_emp_bias = USB2_BIAS_28P15MV, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_DE_EMP_ON, + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, + }" # uSD + register "usb2_ports[5]" = "{ + .enable = 1, + .ocpin = OC_SKIP, + .tx_bias = USB2_BIAS_0MV, + .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, + .pre_emp_bias = USB2_BIAS_28P15MV, + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, + }" # UFCamera + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth port for CNVi WLAN + + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A port A1 + + register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)" + register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC_SKIP)" + + register "serial_io_i2c_mode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + # Configure external V1P05/Vnn/VnnSx Rails + register "ext_fivr_settings" = "{ + .configure_ext_fivr = 1, + .v1p05_enable_bitmap = FIVR_ENABLE_ALL_SX & ~FIVR_ENABLE_S0, + .vnn_enable_bitmap = FIVR_ENABLE_ALL_SX , + .vnn_sx_enable_bitmap = FIVR_ENABLE_ALL_SX , + .v1p05_supported_voltage_bitmap = FIVR_VOLTAGE_NORMAL, + .vnn_supported_voltage_bitmap = FIVR_VOLTAGE_MIN_RETENTION, + .v1p05_voltage_mv = 1050, + .vnn_voltage_mv = 780, + .vnn_sx_voltage_mv = 1050, + .v1p05_icc_max_ma = 500, + .vnn_icc_max_ma = 500, + }" + + # VR Settings + register "domain_vr_config[VR_DOMAIN_IA]" = "{ + .vr_config_enable = 1, + .tdc_timewindow = 1000, + .ac_loadline = 500, + .dc_loadline = 500, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + }" + + register "domain_vr_config[VR_DOMAIN_GT]" = "{ + .vr_config_enable = 1, + .tdc_timewindow = 1000, + .psi1threshold = VR_CFG_AMP(13), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + + }" + + # Enable the Cnvi BT Audio Offload + register "cnvi_bt_audio_offload" = "1" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C1 | Touchscreen | + #| I2C2 | WCAM | + #| I2C3 | Audio | + #| I2C4 | EMR | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .panel_orientation = LB_FB_ORIENTATION_RIGHT_UP, + .i2c[0] = { + .early_init = 1, + .speed = I2C_SPEED_FAST_PLUS, + .speed_config[0] = { + .speed = I2C_SPEED_FAST_PLUS, + .scl_lcnt = 55, + .scl_hcnt = 30, + .sda_hold = 7, + } + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 157, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 157, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 158, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 158, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 158, + .scl_hcnt = 79, + .sda_hold = 7, + } + }, + }" + + device domain 0 on + device ref dtt on + chip drivers/intel/dptf + ## sensor information + register "options.tsr[0].desc" = ""Memory"" + register "options.tsr[1].desc" = ""Charger"" + register "options.tsr[2].desc" = ""Ambient"" + + # TODO: below values are initial reference values only + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000), + [2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 5000), + [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 75, 5000), + }" + + ## Critical Policy + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN), + }" + + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 3000, + .max_power = 6000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200 + }, + .pl2 = { + .min_power = 25000, + .max_power = 25000, + .time_window_min = 1, + .time_window_max = 1, + .granularity = 1000 + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 1700 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + device generic 0 on end + end + end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + register "cio2_num_ports" = "1" + register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0"" + register "cio2_prt[0]" = "2" + device generic 0 on + probe WFC WFC_MIPI_OV8856 + end + end + end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "enable_cnvi_ddr_rfim" = "true" + device generic 0 on end + end + end + device ref i2c1 on + chip drivers/i2c/hid + register "generic.hid" = ""HX121A"" + register "generic.desc" = ""HX Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "200" + register "generic.reset_off_delay_ms" = "2" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x4F on end + end + end + device ref i2c2 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "1" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "2" + register "link_freq[0]" = "360000000" + register "link_freq[1]" = "180000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X + register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X + register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 36 on + probe WFC WFC_MIPI_OV8856 + end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "3" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW AF DAC"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC"" + register "vcm_compat" = ""dongwoon,dw9714"" + + device i2c 0C on + probe WFC WFC_MIPI_OV8856 + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""GT24C08"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC"" - device domain 0 on - end + register "nvm_size" = "0x2000" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x10" + register "nvm_compat" = ""atmel,24c08"" + device i2c 50 on + probe WFC WFC_MIPI_OV8856 + end + end + end + device ref i2c3 on + chip drivers/i2c/da7219 + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)" + register "btn_cfg" = "50" + register "mic_det_thr" = "500" + register "jack_ins_deb" = "20" + register "jack_det_rate" = ""32ms_64ms"" + register "jack_rem_deb" = "1" + register "a_d_btn_thr" = "0xa" + register "d_b_btn_thr" = "0x16" + register "b_c_btn_thr" = "0x21" + register "c_mic_btn_thr" = "0x3e" + register "btn_avg" = "4" + register "adc_1bit_rpt" = "1" + register "micbias_lvl" = "2600" + register "mic_amp_in_sel" = ""diff"" + device i2c 1a on end + end + end + device ref i2c4 on + chip drivers/i2c/hid + register "generic.hid" = ""WCOM014B"" + register "generic.desc" = ""WCOM Digitizer"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F12_IRQ)" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "20" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F16)" + register "generic.reset_delay_ms" = "100" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x09 on + probe STYLUS STYLUS_PRESENT + end + end + end + device ref i2c5 on + chip drivers/i2c/hid + register "generic.hid" = ""ZNT0000"" + register "generic.desc" = ""Zinitix Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "generic.wake" = "GPE0_DW2_14" + register "generic.detect" = "1" + register "hid_desc_reg_offset" = "0xE" + device i2c 40 on end + end + end + device ref hda on + chip drivers/generic/max98357a + register "hid" = ""MX98360A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end + device ref pcie_rp7 off end + device ref pcie_rp9 off end + device ref emmc on + probe STORAGE STORAGE_EMMC + end + device ref ish on + chip drivers/intel/ish + register "add_acpi_dma_property" = "true" + device generic 0 on end + end + end + device ref ufs on + probe STORAGE STORAGE_UFS + end + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + use usb2_port1 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + use usb2_port2 as usb2_port + use tcss_usb3_port2 as usb3_port + device generic 1 alias conn1 on end + end + end + end + end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C1 (DB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" + device ref tcss_usb3_port2 on end + end + end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C1 (DB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" + device ref usb2_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A1 (DB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb2_port4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 SDCard"" + register "type" = "UPC_TYPE_EXPRESSCARD" + device ref usb2_port5 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A1 (DB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))" + device ref usb3_port2 on end + end + end + end + end + end end -- cgit v1.2.3