From 5f824332066ab66eb9d218263d3d68cf1ac50507 Mon Sep 17 00:00:00 2001 From: Mario Scheithauer Date: Wed, 14 Nov 2018 08:51:10 +0100 Subject: siemens/mc_apl4: Clean up ramstage Currently, there is nothing for this mainboard to do in ramstage. Change-Id: Id74a5f3f0a0583dc6bc81044913b8bb83d3b0b93 Signed-off-by: Mario Scheithauer Reviewed-on: https://review.coreboot.org/29632 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Werner Zeh --- .../siemens/mc_apl1/variants/mc_apl4/Kconfig | 4 - .../siemens/mc_apl1/variants/mc_apl4/Makefile.inc | 2 - .../siemens/mc_apl1/variants/mc_apl4/mainboard.c | 98 ---------------------- 3 files changed, 104 deletions(-) delete mode 100644 src/mainboard/siemens/mc_apl1/variants/mc_apl4/mainboard.c diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl4/Kconfig b/src/mainboard/siemens/mc_apl1/variants/mc_apl4/Kconfig index 3cf7406020..ea81c6ce13 100644 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl4/Kconfig +++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl4/Kconfig @@ -4,10 +4,6 @@ if BOARD_SIEMENS_MC_APL4 config BOARD_SIEMENS_MC_APL4_VAR def_bool y select DRIVER_INTEL_I210 - select DRIVERS_I2C_RX6110SA - select DRIVER_SIEMENS_NC_FPGA - select NC_FPGA_NOTIFY_CB_READY - select APL_SKIP_SET_POWER_LIMITS config DEVICETREE string diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl4/Makefile.inc b/src/mainboard/siemens/mc_apl1/variants/mc_apl4/Makefile.inc index caf542fcd2..fd45b948ff 100644 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl4/Makefile.inc +++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl4/Makefile.inc @@ -1,3 +1 @@ romstage-y += memory.c - -ramstage-y += mainboard.c diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl4/mainboard.c b/src/mainboard/siemens/mc_apl1/variants/mc_apl4/mainboard.c deleted file mode 100644 index ccf3ab8ec1..0000000000 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl4/mainboard.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2018 Siemens AG - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define TX_DWORD3 0xa8c - -void variant_mainboard_final(void) -{ - struct device *dev = NULL; - - /* - * PIR6 register mapping for PCIe root ports - * INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA# - */ - pcr_write16(PID_ITSS, 0x314c, 0x0321); - - /* Disable clock outputs 1-5 (CLKOUT) for XIO2001 PCIe to PCI Bridge. */ - dev = dev_find_device(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2001, 0); - if (dev) - pci_write_config8(dev, 0xd8, 0x3e); - - /* Enable CLKRUN_EN for power gating LPC */ - lpc_enable_pci_clk_cntl(); - - /* - * Enable LPC PCE (Power Control Enable) by setting IOSF-SB port 0xD2 - * offset 0x341D bit3 and bit0. - * Enable LPC CCE (Clock Control Enable) by setting IOSF-SB port 0xD2 - * offset 0x341C bit [3:0]. - */ - pcr_or32(PID_LPC, PCR_LPC_PRC, (PCR_LPC_CCE_EN | PCR_LPC_PCE_EN)); - - /* - * Correct the SATA transmit signal via the High Speed I/O Transmit - * Control Register 3. - * Bit [23:16] set the output voltage swing for TX line. - * The value 0x4a sets the swing level to 0.58 V. - */ - pcr_rmw32(PID_MODPHY, TX_DWORD3, (0x00 << 16), (0x4a << 16)); -} - -static void wait_for_legacy_dev(void *unused) -{ - uint32_t legacy_delay, us_since_boot; - struct stopwatch sw; - - /* Open main hwinfo block. */ - if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS) - return; - - /* Get legacy delay parameter from hwinfo. */ - if (hwilib_get_field(LegacyDelay, (uint8_t *) &legacy_delay, - sizeof(legacy_delay)) != sizeof(legacy_delay)) - return; - - us_since_boot = get_us_since_boot(); - /* No need to wait if the time since boot is already long enough.*/ - if (us_since_boot > legacy_delay) - return; - stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000); - printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...", - legacy_delay - us_since_boot, legacy_delay); - stopwatch_wait_until_expired(&sw); - printk(BIOS_NOTICE, "done!\n"); -} - -static void finalize_boot(void *unused) -{ - /* Set coreboot ready LED. */ - gpio_output(CNV_RGI_DT, 1); -} - -BOOT_STATE_INIT_ENTRY(BS_DEV_ENUMERATE, BS_ON_ENTRY, wait_for_legacy_dev, NULL); -BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_BOOT, BS_ON_ENTRY, finalize_boot, NULL); -- cgit v1.2.3