From 5beac7f996633733d45df28479c20b7574aa60de Mon Sep 17 00:00:00 2001 From: Nils Jacobs Date: Wed, 3 Nov 2010 13:19:50 +0000 Subject: Clean up some comments and white space in gx2/northbridgeinit.c and gx2/raminit.c. This is Abuild and boot tested. Signed-off-by: Nils Jacobs Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6014 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/amd/gx2/northbridgeinit.c | 367 +++++++++++++----------------- src/northbridge/amd/gx2/raminit.c | 115 +++++----- 2 files changed, 212 insertions(+), 270 deletions(-) diff --git a/src/northbridge/amd/gx2/northbridgeinit.c b/src/northbridge/amd/gx2/northbridgeinit.c index b71c574cbd..410998a70f 100644 --- a/src/northbridge/amd/gx2/northbridgeinit.c +++ b/src/northbridge/amd/gx2/northbridgeinit.c @@ -22,26 +22,25 @@ struct gliutable { }; struct gliutable gliu0table[] = { - {.desc_name=MSR_GLIU0_BASE1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/ - {.desc_name=MSR_GLIU0_BASE2, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc*/ - {.desc_name=MSR_GLIU0_SHADOW, .desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo*/ - {.desc_name=MSR_GLIU0_SYSMEM, .desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/ - {.desc_name=MSR_GLIU0_DMM, .desc_type= BMO_DMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/ - {.desc_name=MSR_GLIU0_SMM, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/ + {.desc_name=MSR_GLIU0_BASE1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC */ + {.desc_name=MSR_GLIU0_BASE2, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc */ + {.desc_name=MSR_GLIU0_SHADOW, .desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo */ + {.desc_name=MSR_GLIU0_SYSMEM, .desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */ + {.desc_name=MSR_GLIU0_DMM, .desc_type= BMO_DMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */ + {.desc_name=MSR_GLIU0_SMM, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */ {.desc_name=GLIU0_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL0_CPU}, {.desc_name=GL_END, .desc_type= GL_END,.hi= 0x0,.lo= 0x0}, }; - struct gliutable gliu1table[] = { - {.desc_name=MSR_GLIU1_BASE1,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/ - {.desc_name=MSR_GLIU1_BASE2,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0}, /* 80000-9ffff to Mc*/ - {.desc_name=MSR_GLIU1_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode)*/ - {.desc_name=MSR_GLIU1_SYSMEM,.desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly.*/ - {.desc_name=MSR_GLIU1_DMM,.desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly.*/ - {.desc_name=MSR_GLIU1_SMM,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly.*/ + {.desc_name=MSR_GLIU1_BASE1,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC */ + {.desc_name=MSR_GLIU1_BASE2,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0}, /* 80000-9ffff to Mc */ + {.desc_name=MSR_GLIU1_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) */ + {.desc_name=MSR_GLIU1_SYSMEM,.desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */ + {.desc_name=MSR_GLIU1_DMM,.desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */ + {.desc_name=MSR_GLIU1_SMM,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */ {.desc_name=GLIU1_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL1_GLIU0}, - {.desc_name=MSR_GLIU1_FPU_TRAP,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0*/ + {.desc_name=MSR_GLIU1_FPU_TRAP,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0 */ {.desc_name=GL_END,.desc_type= GL_END,.hi= 0x0,.lo= 0x0}, }; @@ -54,18 +53,18 @@ struct msrinit { struct msrinit ClockGatingDefault [] = { {GLIU0_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}}, - /* MC must stay off in SDR mode. It is turned on in CPUBug??? lotus #77.142*/ + /* MC must stay off in SDR mode. It is turned on in CPUBug??? lotus #77.142 */ {MC_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, {GLIU1_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}}, - {VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* lotus #77.163*/ + {VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* lotus #77.163 */ {GP_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}}, {DF_GLD_MSR_PM, {.hi=0x00,.lo=0x0155}}, {GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}}, {GLPCI_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}}, - {FG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* Always on*/ + {FG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* Always on */ {0xffffffff, {0xffffffff, 0xffffffff}}, }; - /* All On*/ + /* All On */ struct msrinit ClockGatingAllOn[] = { {GLIU0_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}}, {MC_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}}, @@ -79,7 +78,7 @@ struct msrinit ClockGatingAllOn[] = { {0xffffffff, {0xffffffff, 0xffffffff}}, }; - /* Performance*/ + /* Performance */ struct msrinit ClockGatingPerformance[] = { {VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* lotus #77.163*/ {GP_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}}, @@ -87,19 +86,18 @@ struct msrinit ClockGatingPerformance[] = { {GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}}, {0xffffffff, {0xffffffff, 0xffffffff}}, }; -/* */ -/* SET GeodeLink PRIORITY*/ -/* */ + + /* SET GeodeLink PRIORITY */ struct msrinit GeodeLinkPriorityTable [] = { - {CPU_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0220}}, /* CPU Priority.*/ - {DF_GLD_MSR_MASTER_CONF, {.hi=0x00,.lo=0x0000}}, /* DF Priority.*/ - {VG_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0720}}, /* VG Primary and Secondary Priority.*/ - {GP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0010}}, /* Graphics Priority.*/ - {GLPCI_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0027}}, /* GLPCI Priority + PID*/ - {GLCP_GLD_MSR_CONF, {.hi=0x00,.lo=0x0001}}, /* GLCP Priority + PID*/ - {VIP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0622}}, /* VIP PID*/ - {AES_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0013}}, /* AES PID*/ - {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END*/ + {CPU_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0220}}, /* CPU Priority. */ + {DF_GLD_MSR_MASTER_CONF, {.hi=0x00,.lo=0x0000}}, /* DF Priority. */ + {VG_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0720}}, /* VG Primary and Secondary Priority. */ + {GP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0010}}, /* Graphics Priority. */ + {GLPCI_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0027}}, /* GLPCI Priority + PID */ + {GLCP_GLD_MSR_CONF, {.hi=0x00,.lo=0x0001}}, /* GLCP Priority + PID */ + {VIP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0622}}, /* VIP PID */ + {AES_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0013}}, /* AES PID */ + {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END */ }; /* do we have dmi or not? assume NO per AMD */ @@ -111,7 +109,7 @@ writeglmsr(struct gliutable *gl){ msr.lo = gl->lo; msr.hi = gl->hi; - wrmsr(gl->desc_name, msr); // MSR - see table above + wrmsr(gl->desc_name, msr); /* MSR - see table above */ printk(BIOS_DEBUG, "%s: write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); /* they do this, so we do this */ msr = rdmsr(gl->desc_name); @@ -131,10 +129,9 @@ ShadowInit(struct gliutable *gl) } /* NOTE: transcribed from assembly code. There is the usual redundant assembly nonsense in here. - * CLEAN ME UP - */ -/* yes, this duplicates later code, but it seems that is how they want it done. - */ + * CLEAN ME UP + */ +/* yes, this duplicates later code, but it seems that is how they want it done. */ static void SysmemInit(struct gliutable *gl) { @@ -161,12 +158,12 @@ SysmemInit(struct gliutable *gl) sizebytes &= 0xfff00000; sizebytes |= 0x100; msr.lo = sizebytes; - wrmsr(gl->desc_name, msr); // MSR - see table above + wrmsr(gl->desc_name, msr); /* MSR - see table above */ msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); - } + static void DMMGL0Init(struct gliutable *gl) { msr_t msr; @@ -189,11 +186,11 @@ DMMGL0Init(struct gliutable *gl) { msr.lo = DMM_OFFSET << 8; msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff; - wrmsr(gl->desc_name, msr); // MSR - See table above + wrmsr(gl->desc_name, msr); /* MSR - See table above */ msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); - } + static void DMMGL1Init(struct gliutable *gl) { msr_t msr; @@ -212,10 +209,11 @@ DMMGL1Init(struct gliutable *gl) { printk(BIOS_ERR, "%s: warning, using DMM_SIZE even though AMD used SMM_SIZE\n", __func__); msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff; - wrmsr(gl->desc_name, msr); // MSR - See table above + wrmsr(gl->desc_name, msr); /* MSR - See table above */ msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } + static void SMMGL0Init(struct gliutable *gl) { msr_t msr; @@ -239,10 +237,11 @@ SMMGL0Init(struct gliutable *gl) { msr.lo = SMM_OFFSET << 8; msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff; - wrmsr(gl->desc_name, msr); // MSR - See table above + wrmsr(gl->desc_name, msr); /* MSR - See table above */ msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } + static void SMMGL1Init(struct gliutable *gl) { msr_t msr; @@ -255,7 +254,7 @@ SMMGL1Init(struct gliutable *gl) { msr.lo = SMM_OFFSET << 8; msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff; - wrmsr(gl->desc_name, msr); // MSR - See table above + wrmsr(gl->desc_name, msr); /* MSR - See table above */ msr = rdmsr(gl->desc_name); printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); } @@ -268,69 +267,58 @@ GLIUInit(struct gliutable *gl){ default: /* For Unknown types: Write then read MSR */ writeglmsr(gl); - case SC_SHADOW: /* Check for a Shadow entry*/ + case SC_SHADOW: /* Check for a Shadow entry */ ShadowInit(gl); break; - case R_SYSMEM: /* check for a SYSMEM entry*/ + case R_SYSMEM: /* check for a SYSMEM entry */ SysmemInit(gl); break; - case BMO_DMM: /* check for a DMM entry*/ + case BMO_DMM: /* check for a DMM entry */ DMMGL0Init(gl); break; - case BM_DMM : /* check for a DMM entry*/ + case BM_DMM : /* check for a DMM entry */ DMMGL1Init(gl); break; - case BMO_SMM : /* check for a SMM entry*/ + case BMO_SMM : /* check for a SMM entry */ SMMGL0Init(gl); break; - case BM_SMM : /* check for a SMM entry*/ + case BM_SMM : /* check for a SMM entry */ SMMGL1Init(gl); break; } gl++; } - } - /* ***************************************************************************/ - /* **/ - /* * GLPCIInit*/ - /* **/ - /* * Set up GLPCI settings for reads/write into memory*/ - /* * R0: 0-640KB,*/ - /* * R1: 1MB - Top of System Memory*/ - /* * R2: SMM Memory*/ - /* * R3: Framebuffer? - not set up yet*/ - /* * R4: ??*/ - /* **/ - /* * Entry:*/ - /* * Exit:*/ - /* * Modified:*/ - /* **/ - /* ***************************************************************************/ + +/* + * Set up GLPCI settings for reads/write into memory. + * + * R0: 0-640KB, + * R1: 1MB - Top of System Memory + * R2: SMM Memory + * R3: Framebuffer? - not set up yet + * R4: ?? + */ static void GLPCIInit(void){ struct gliutable *gl = 0; int i; msr_t msr; int msrnum; - /* */ - /* R0 - GLPCI settings for Conventional Memory space.*/ - /* */ - msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT /* 640*/; - msr.lo = 0 /* 0*/; + /* R0 - GLPCI settings for Conventional Memory space. */ + msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; /* 640 */ + msr.lo = 0; /* 0 */ msr.lo |= GLPCI_RC_LOWER_EN_SET+ GLPCI_RC_LOWER_PF_SET + GLPCI_RC_LOWER_WC_SET; msrnum = GLPCI_RC0; wrmsr(msrnum, msr); - /* */ - /* R1 - GLPCI settings for SysMem space.*/ - /* */ - /* Get systop from GLIU0 SYSTOP Descriptor*/ + /* R1 - GLPCI settings for SysMem space. */ + /* Get systop from GLIU0 SYSTOP Descriptor */ for(i = 0; gliu0table[i].desc_name != GL_END; i++) { if (gliu0table[i].desc_type == R_SYSMEM) { gl = &gliu0table[i]; @@ -345,8 +333,8 @@ static void GLPCIInit(void){ * translates to a base of 0x00100000 and top of 0xffbf0000 * base of 1M and top of around 256M */ - /* we have to create a page-aligned (4KB page) address for base and top */ - /* So we need a high page aligned addresss (pah) and low page aligned address (pal) + /* we have to create a page-aligned (4KB page) address for base and top + * So we need a high page aligned addresss (pah) and low page aligned address (pal) * pah is from msr.hi << 12 | msr.low >> 20. pal is msr.lo << 12 */ printk(BIOS_DEBUG, "GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi); @@ -363,9 +351,7 @@ static void GLPCIInit(void){ wrmsr(msrnum, msr); } - /* */ - /* R2 - GLPCI settings for SMM space.*/ - /* */ + /* R2 - GLPCI settings for SMM space. */ msr.hi = ((SMM_OFFSET+(SMM_SIZE*1024-1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT; msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET; @@ -373,9 +359,9 @@ static void GLPCIInit(void){ wrmsr(msrnum, msr); /* this is done elsewhere already, but it does no harm to do it more than once */ - /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility.*/ - msr.lo = 0x021212121 /* cache disabled and write serialized*/; - msr.hi = 0x021212121 /* cache disabled and write serialized*/; + /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility. */ + msr.lo = 0x021212121; /* cache disabled and write serialized */ + msr.hi = 0x021212121; /* cache disabled and write serialized */ msrnum = CPU_RCONF_A0_BF; wrmsr(msrnum, msr); @@ -386,7 +372,7 @@ static void GLPCIInit(void){ msrnum = CPU_RCONF_E0_FF; wrmsr(msrnum, msr); - /* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup.*/ + /* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup. */ msrnum = GLPCI_A0_BF; msr.hi = 0x35353535; msr.lo = 0x35353535; @@ -402,29 +388,26 @@ static void GLPCIInit(void){ msr.lo = 0x35353535; wrmsr(msrnum, msr); - /* Set WSREQ*/ + /* Set WSREQ */ msrnum = CPU_DM_CONFIG0; msr = rdmsr(msrnum); msr.hi &= ~ (7 << DM_CONFIG0_UPPER_WSREQ_SHIFT); - msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT ; /* reduce to 1 for safe mode.*/ + msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT ; /* reduce to 1 for safe mode. */ wrmsr(msrnum, msr); /* we are ignoring the 5530 case for now, and perhaps forever. */ - /* */ - /* 5535 NB Init*/ - /* */ + /* 5535 NB Init */ msrnum = GLPCI_ARB; msr = rdmsr(msrnum); msr.hi |= GLPCI_ARB_UPPER_PRE0_SET | GLPCI_ARB_UPPER_PRE1_SET; msr.lo |= GLPCI_ARB_LOWER_IIE_SET; wrmsr(msrnum, msr); - msrnum = GLPCI_CTRL; msr = rdmsr(msrnum); - msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .)*/ + msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .) */ msr.lo |= GLPCI_CTRL_LOWER_LDE_SET; msr.lo &= ~ (0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT); @@ -449,37 +432,23 @@ static void GLPCIInit(void){ msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT; wrmsr(msrnum, msr); - - /* Set GLPCI Latency Timer.*/ + /* Set GLPCI Latency Timer. */ msrnum = GLPCI_CTRL; msr = rdmsr(msrnum); - msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone.*/ + msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone. */ wrmsr(msrnum, msr); - /* GLPCI_SPARE*/ + /* GLPCI_SPARE */ msrnum = GLPCI_SPARE; msr = rdmsr(msrnum); msr.lo &= ~ 0x7; msr.lo |= GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET | GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET | GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET; wrmsr(msrnum, msr); - } - - - /* ***************************************************************************/ - /* **/ - /* * ClockGatingInit*/ - /* **/ - /* * Enable Clock Gating.*/ - /* **/ - /* * Entry:*/ - /* * Exit:*/ - /* * Modified:*/ - /* **/ - /* ***************************************************************************/ -static void -ClockGatingInit (void){ +/* Enable Clock Gating. */ +static void ClockGatingInit (void) +{ msr_t msr; struct msrinit *gating = ClockGatingDefault; int i; @@ -511,14 +480,13 @@ performance: msr.lo |= gating->msr.lo; printk(BIOS_DEBUG, "%s: MSR 0x%08lx will be set to 0x%08x:0x%08x\n", __func__, gating->msrnum, msr.hi, msr.lo); - wrmsr(gating->msrnum, msr); // MSR - See the table above + wrmsr(gating->msrnum, msr); /* MSR - See the table above */ gating +=1; } - } -static void -GeodeLinkPriority(void){ +static void GeodeLinkPriority(void) +{ msr_t msr; struct msrinit *prio = GeodeLinkPriorityTable; int i; @@ -531,17 +499,16 @@ GeodeLinkPriority(void){ msr.lo |= prio->msr.lo; printk(BIOS_DEBUG, "%s: MSR 0x%08lx will be set to 0x%08x:0x%08x\n", __func__, prio->msrnum, msr.hi, msr.lo); - wrmsr(prio->msrnum, msr); // MSR - See the table above + wrmsr(prio->msrnum, msr); /* MSR - See the table above */ prio +=1; } } - - /* - * Get the GLIU0 shadow register settings - * If the setShadow function is used then all shadow descriptors - * will stay sync'ed. + * Get the GLIU0 shadow register settings. + * + * If the setShadow function is used then all shadow descriptors + * will stay sync'ed. */ static uint64_t getShadow(void) { @@ -550,83 +517,81 @@ static uint64_t getShadow(void) return ( ( (uint64_t) msr.hi ) << 32 ) | msr.lo; } - /* - * Set the cache RConf registers for the memory hole. - * Keeps all cache shadow descriptors sync'ed. - * This is part of the PCI lockup solution - * Entry: EDX:EAX is the shadow settings + * Set the cache RConf registers for the memory hole. + * + * Keeps all cache shadow descriptors sync'ed. + * This is part of the PCI lockup solution. + * + * Entry: EDX:EAX is the shadow settings. */ static void setShadowRCONF(uint32_t shadowHi, uint32_t shadowLo) { - // ok this is whacky bit translation time. + /* ok this is whacky bit translation time. */ int bit; uint8_t shadowByte; msr_t msr; shadowByte = (uint8_t) (shadowLo >> 16); - // load up D000 settings in edx. + /* load up D000 settings in edx. */ for (bit = 8; (bit > 4); bit--) { msr.hi <<= 8; - msr.hi |= 1; // cache disable PCI/Shadow memory + msr.hi |= 1; /* cache disable PCI/Shadow memory */ if (shadowByte && (1 << bit)) - msr.hi |= 0x20; // write serialize PCI memory + msr.hi |= 0x20; /* write serialize PCI memory */ } - // load up C000 settings in eax. + /* load up C000 settings in eax. */ for ( ; bit; bit--) { msr.lo <<= 8; - msr.lo |= 1; // cache disable PCI/Shadow memory + msr.lo |= 1; /* cache disable PCI/Shadow memory */ if (shadowByte && (1 << bit)) - msr.lo |= 0x20; // write serialize PCI memory + msr.lo |= 0x20; /* write serialize PCI memory */ } wrmsr(CPU_RCONF_C0_DF, msr); shadowByte = (uint8_t) (shadowLo >> 24); - // load up F000 settings in edx. + /* load up F000 settings in edx. */ for (bit = 8; (bit > 4); bit--) { msr.hi <<= 8; - msr.hi |= 1; // cache disable PCI/Shadow memory + msr.hi |= 1; /* cache disable PCI/Shadow memory */ if (shadowByte && (1 << bit)) - msr.hi |= 0x20; // write serialize PCI memory + msr.hi |= 0x20; /* write serialize PCI memory */ } - // load up E000 settings in eax. + /* load up E000 settings in eax. */ for ( ; bit; bit--) { msr.lo <<= 8; - msr.lo |= 1; // cache disable PCI/Shadow memory + msr.lo |= 1; /* cache disable PCI/Shadow memory */ if (shadowByte && (1 << bit)) - msr.lo |= 0x20; // write serialize PCI memory + msr.lo |= 0x20; /* write serialize PCI memory */ } wrmsr(CPU_RCONF_E0_FF, msr); } - /* - * Set the GLPCI registers for the memory hole. - * Keeps all cache shadow descriptors sync'ed. - * Entry: EDX:EAX is the shadow settings + * Set the GLPCI registers for the memory hole. + * Keeps all cache shadow descriptors sync'ed. + * Entry: EDX:EAX is the shadow settings */ static void setShadowGLPCI(uint32_t shadowHi, uint32_t shadowLo) { msr_t msr; -// Set the Enable Register. - + /* Set the Enable Register. */ msr = rdmsr(GLPCI_REN); msr.lo &= 0xFFFF00FF; msr.lo |= ( (shadowLo & 0xFFFF0000) >> 8); wrmsr(GLPCI_REN, msr); } - /* - * Set the GLIU SC register settings. Scans descriptor tables for SC_SHADOW. - * Keeps all shadow descriptors sync'ed. - * Entry: EDX:EAX is the shadow settings + * Set the GLIU SC register settings. Scans descriptor tables for SC_SHADOW. + * Keeps all shadow descriptors sync'ed. + * Entry: EDX:EAX is the shadow settings */ static void setShadow(uint64_t shadowSettings) { @@ -647,50 +612,34 @@ static void setShadow(uint64_t shadowSettings) msr = rdmsr(pTable->desc_name); msr.lo = (uint32_t) shadowSettings; - msr.hi &= 0xFFFF0000; // maintain PDID in upper EDX + msr.hi &= 0xFFFF0000; /* maintain PDID in upper EDX */ msr.hi |= ((uint32_t) (shadowSettings >> 32)) & 0x0000FFFF; - wrmsr(pTable->desc_name, msr); // MSR - See the table above + wrmsr(pTable->desc_name, msr); /* MSR - See the table above */ } } } } -/************************************************************************** - * - * shadowRom - * - * Set up a stack for ease of further testing - * - * Entry: - * Exit: - * Destroys: - * - **************************************************************************/ -static void -shadowRom(void) +/* Set up a stack for ease of further testing. */ +static void shadowRom(void) { uint64_t shadowSettings = getShadow(); - shadowSettings &= (uint64_t) 0xFFFF00000000FFFFULL; // Disable read & writes - shadowSettings |= (uint64_t) 0x0000FFFFFFFF0000ULL; // Enable reads for C0000-FFFFF + shadowSettings &= (uint64_t) 0xFFFF00000000FFFFULL; /* Disable read & writes */ + shadowSettings |= (uint64_t) 0x0000FFFFFFFF0000ULL; /* Enable reads for C0000-FFFFF */ setShadow(shadowSettings); } - - -/*************************************************************************** - * - * RCONFInit - * Set up RCONF_DEFAULT and any other RCONF registers needed - * - * DEVRC_RCONF_DEFAULT: - * ROMRC(63:56) = 04h ; write protect ROMBASE - * ROMBASE(36:55) = 0FFFC0h ; Top of PCI/bottom of rom chipselect area - * DEVRC(35:28) = 39h ; cache disabled in PCI memory + WS bit on + Write Combine + write burst. - * SYSTOP(27:8) = top of system memory - * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough +/* + * Set up RCONF_DEFAULT and any other RCONF registers needed. * - ***************************************************************************/ + * DEVRC_RCONF_DEFAULT: + * ROMRC(63:56) = 04h ; write protect ROMBASE + * ROMBASE(36:55) = 0FFFC0h ; Top of PCI/bottom of rom chipselect area + * DEVRC(35:28) = 39h ; cache disabled in PCI memory + WS bit on + Write Combine + write burst. + * SYSTOP(27:8) = top of system memory + * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough + */ #define SYSMEM_RCONF_WRITETHROUGH 8 #define DEVRC_RCONF_DEFAULT 0x21 #define ROMBASE_RCONF_DEFAULT 0xFFFC0000 @@ -712,11 +661,11 @@ RCONFInit(void) } } if (gl == 0) { - post_code(0xCE); /* POST_RCONFInitError */ + post_code(0xCE); /* POST_RCONFInitError */ while (1); } -// sysdescfound: +/* sysdescfound: */ /* found the descriptor... get its contents */ msr = rdmsr(gl->desc_name); @@ -725,26 +674,26 @@ RCONFInit(void) */ msr.lo = (msr.lo & 0xFFFFFF00) | (msr.hi & 0xFF); msr.lo = ((msr.lo << 12) | (msr.lo >> 20)) & 0x000FFFFF; - msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; // 8 + msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; /* 8 */ - // Set Default SYSMEM region properties - msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; // 8 (or ~8) + /* Set Default SYSMEM region properties */ + msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; /* 8 (or ~8) */ - // Set PCI space cache properties - msr.hi = (DEVRC_RCONF_DEFAULT >> 4); // only need the bottom bits and lets clean the rest of edx + /* Set PCI space cache properties */ + msr.hi = (DEVRC_RCONF_DEFAULT >> 4); /* only need the bottom bits and lets clean the rest of edx */ msr.lo |= (DEVRC_RCONF_DEFAULT << 28); - // Set the ROMBASE. This is usually FFFC0000h + /* Set the ROMBASE. This is usually FFFC0000h */ msr.hi |= (ROMBASE_RCONF_DEFAULT >> 12) << RCONF_DEFAULT_UPPER_ROMBASE_SHIFT; - // Set ROMBASE cache properties. + /* Set ROMBASE cache properties. */ msr.hi |= ((ROMRC_RCONF_DEFAULT >> 8) | (ROMRC_RCONF_DEFAULT << 24)); - // now program RCONF_DEFAULT + /* now program RCONF_DEFAULT */ wrmsr(CPU_RCONF_DEFAULT, msr); - // RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties. - // Set to match system memory cache properties. + /* RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties. */ + /* Set to match system memory cache properties. */ msr = rdmsr(CPU_RCONF_DEFAULT); SysMemCacheProp = (uint8_t) (msr.lo & 0xFF); msr = rdmsr(CPU_RCONF_BYPASS); @@ -752,21 +701,8 @@ RCONFInit(void) wrmsr(CPU_RCONF_BYPASS, msr); } - -/* ***************************************************************************/ -/* **/ -/* * northBridgeInit*/ -/* **/ -/* * Core Logic initialization: Host bridge*/ -/* **/ -/* * Entry:*/ -/* * Exit:*/ -/* * Modified:*/ -/* **/ -/* ***************************************************************************/ - -void -northbridgeinit(void) +/* Core Logic initialization: Host bridge. */ +void northbridgeinit(void) { msr_t msr; int i; @@ -779,22 +715,23 @@ northbridgeinit(void) shadowRom(); - // GeodeROM ensures that the BIOS waits the required 1 second before - // allowing anything to access PCI + /* GeodeROM ensures that the BIOS waits the required 1 second before */ + /* allowing anything to access PCI */ // PCIDelay(); RCONFInit(); - // The cacheInit function in GeodeROM tests cache and, among other things, - // makes sure all INVD instructions are treated as WBINVD. We do this - // because we've found some programs which require this behavior. - // That subset of cacheInit() is implemented here: + /* The cacheInit function in GeodeROM tests cache and, among other things, + * makes sure all INVD instructions are treated as WBINVD. We do this + * because we've found some programs which require this behavior. + * That subset of cacheInit() is implemented here: + */ msr = rdmsr(CPU_DM_CONFIG0); msr.lo |= DM_CONFIG0_LOWER_WBINVD_SET; wrmsr(CPU_DM_CONFIG0, msr); - /* Now that the descriptor to memory is set up.*/ - /* The memory controller needs one read to synch its lines before it can be used.*/ + /* Now that the descriptor to memory is set up. */ + /* The memory controller needs one read to synch its lines before it can be used. */ i = *(int *) 0; GLPCIInit(); diff --git a/src/northbridge/amd/gx2/raminit.c b/src/northbridge/amd/gx2/raminit.c index 7ceb81a4e3..a895ea8fee 100644 --- a/src/northbridge/amd/gx2/raminit.c +++ b/src/northbridge/amd/gx2/raminit.c @@ -80,12 +80,13 @@ static void auto_size_dimm(unsigned int dimm) dimm_setting |= (spd_byte >> 2) << CF07_UPPER_D0_CB_SHIFT; banner("SPDNUMROWS"); - /*; Field: DIMM size - *; EEPROM byte usage: (3) Number of Row Addresses - *; (4) Number of Column Addresses - *; (5) Number of DIMM Banks - *; (31) Module Bank Density - *; Size = Module Density * Module Banks + /* Field: DIMM size + * EEPROM byte usage: + * (3) Number of Row Addresses + * (4) Number of Column Addresses + * (5) Number of DIMM Banks + * (31) Module Bank Density + * Size = Module Density * Module Banks */ if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0) || (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)) { @@ -100,7 +101,7 @@ static void auto_size_dimm(unsigned int dimm) dimm_size |= (dimm_size << 8); /* align so 1GB(bit0) is bit 8, this is a little weird to get gcc to not optimize this out */ dimm_size &= 0x01FC; /* and off 2GB DIMM size : not supported and the 1GB size we just moved up to bit 8 as well as all the extra on top */ - /* Module Density * Module Banks */ + /* Module Density * Module Banks */ dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */ banner("BEFORT CTZ"); dimm_size = __builtin_ctz(dimm_size); @@ -113,27 +114,32 @@ static void auto_size_dimm(unsigned int dimm) dimm_setting |= dimm_size << CF07_UPPER_D0_SZ_SHIFT; banner("PAGESIZE"); -/*; Field: PAGE size -*; EEPROM byte usage: (4) Number of Column Addresses -*; PageSize = 2^# Column Addresses * Data width in bytes (should be 8bytes for a normal DIMM) -* -*; But this really works by magic. -*; If ma[11:0] is the memory address pins, and pa[13:0] is the physical column address -*; that MC generates, here is how the MC assigns the pa onto the ma pins: -* -*;ma 11 10 09 08 07 06 05 04 03 02 01 00 -*;-------------------------------------------------------------------------------------------------------------------------------------- -*;pa 09 08 07 06 05 04 03 (7 col addr bits = 1K page size) -*;pa 10 09 08 07 06 05 04 03 (8 col addr bits = 2K page size) -*;pa 11 10 09 08 07 06 05 04 03 (9 col addr bits = 4K page size) -*;pa 12 11 10 09 08 07 06 05 04 03 (10 col addr bits = 8K page size) -*;pa 13 AP 12 11 10 09 08 07 06 05 04 03 (11 col addr bits = 16K page size) -*; *AP=autoprecharge bit -* -*; Remember that pa[2:0] are zeroed out since it's a 64-bit data bus (8 bytes), -*; so lower 3 address bits are dont_cares.So from the table above, -*; it's easier to see what the old code is doing: if for example,#col_addr_bits=7(06h), -*; it adds 3 to get 10, then does 2^10=1K. Get it?*/ +/* + * Field: PAGE size + * EEPROM byte usage: (4) Number of Column Addresses + * PageSize = 2^# Column Addresses * Data width in bytes + * (should be 8bytes for a normal DIMM) + * + * But this really works by magic. + * If ma[11:0] is the memory address pins, and pa[13:0] is the physical column + * address that MC generates, here is how the MC assigns the pa onto the + * ma pins: + * + * ma 11 10 09 08 07 06 05 04 03 02 01 00 + * --------------------------------------- + * pa 09 08 07 06 05 04 03 (7 col addr bits = 1K page size) + * pa 10 09 08 07 06 05 04 03 (8 col addr bits = 2K page size) + * pa 11 10 09 08 07 06 05 04 03 (9 col addr bits = 4K page size) + * pa 12 11 10 09 08 07 06 05 04 03 (10 col addr bits = 8K page size) + * pa 13 AP 12 11 10 09 08 07 06 05 04 03 (11 col addr bits = 16K page size) + * + * (AP = autoprecharge bit) + * + * Remember that pa[2:0] are zeroed out since it's a 64-bit data bus (8 bytes), + * so lower 3 address bits are dont_cares. So from the table above, + * it's easier to see what the old code is doing: if for example, + * #col_addr_bits=7(06h), it adds 3 to get 10, then does 2^10=1K. + */ spd_byte = NumColAddr[spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF]; banner("MAXCOLADDR"); @@ -269,26 +275,25 @@ static u8 getcasmap(u32 dimm, u16 glspeed) static void setCAS(void) { -/*;***************************************************************************** -;* -;* setCAS -;* EEPROM byte usage: (18) SDRAM device attributes - CAS latency -;* EEPROM byte usage: (23) SDRAM Minimum Clock Cycle Time @ CLX -.5 -;* EEPROM byte usage: (25) SDRAM Minimum Clock Cycle Time @ CLX -1 -;* -;* The CAS setting is based on the information provided in each DIMMs SPD. -;* The speed at which a DIMM can run is described relative to the slowest -;* CAS the DIMM supports. Each speed for the relative CAS settings is -;* checked that it is within the GeodeLink speed. If it isn't within the GeodeLink -;* speed, the CAS setting is removed from the list of good settings for -;* the DIMM. This is done for both DIMMs and the lists are compared to -;* find the lowest common CAS latency setting. If there are no CAS settings -;* in common we out a ERROR_DIFF_DIMMS (78h) to port 80h and halt. -;* -;* Entry: -;* Exit: Set fastest CAS Latency based on GeodeLink speed and SPD information. -;* Destroys: We really use everything ! -;*****************************************************************************/ +/* + * setCAS + * EEPROM byte usage: (18) SDRAM device attributes - CAS latency + * EEPROM byte usage: (23) SDRAM Minimum Clock Cycle Time @ CLX -.5 + * EEPROM byte usage: (25) SDRAM Minimum Clock Cycle Time @ CLX -1 + * + * The CAS setting is based on the information provided in each DIMMs SPD. + * The speed at which a DIMM can run is described relative to the slowest + * CAS the DIMM supports. Each speed for the relative CAS settings is + * checked that it is within the GeodeLink speed. If it isn't within the GeodeLink + * speed, the CAS setting is removed from the list of good settings for + * the DIMM. This is done for both DIMMs and the lists are compared to + * find the lowest common CAS latency setting. If there are no CAS settings + * in common we out a ERROR_DIFF_DIMMS (78h) to port 80h and halt. + * + * Entry: + * Exit: Set fastest CAS Latency based on GeodeLink speed and SPD information. + * Destroys: We really use everything ! + */ uint16_t glspeed; uint8_t spd_byte, casmap0, casmap1; msr_t msr; @@ -298,7 +303,7 @@ static void setCAS(void) casmap0 = getcasmap(DIMM0, glspeed); casmap1 = getcasmap(DIMM1, glspeed); - /********************* CAS_LAT MAP COMPARE ***************************/ + /* CAS_LAT MAP COMPARE */ if (casmap0 == 0) { spd_byte = CASDDR[__builtin_ctz(casmap1)]; } else if (casmap1 == 0) { @@ -468,7 +473,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) uint8_t spd_byte; banner("sdram_set_spd_register"); - post_code(POST_MEM_SETUP); // post_70h + post_code(POST_MEM_SETUP); /* post_70h */ spd_byte = spd_read_byte(DIMM0, SPD_MODULE_ATTRIBUTES); banner("Check DIMM 0"); @@ -486,23 +491,23 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) hcf(); } - post_code(POST_MEM_SETUP2); // post_72h + post_code(POST_MEM_SETUP2); /* post_72h */ banner("Check DDR MAX"); /* Check that the memory is not overclocked. */ checkDDRMax(); /* Size the DIMMS */ - post_code(POST_MEM_SETUP3); // post_73h + post_code(POST_MEM_SETUP3); /* post_73h */ banner("AUTOSIZE DIMM 0"); auto_size_dimm(DIMM0); - post_code(POST_MEM_SETUP4); // post_74h + post_code(POST_MEM_SETUP4); /* post_74h */ banner("AUTOSIZE DIMM 1"); auto_size_dimm(DIMM1); /* Set CAS latency */ banner("set cas latency"); - post_code(POST_MEM_SETUP5); // post_75h + post_code(POST_MEM_SETUP5); /* post_75h */ setCAS(); /* Set all the other latencies here (tRAS, tRP....) */ @@ -563,7 +568,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) //print_debug("sdram_enable step 6\n"); /* 7. Reset DLL, Bit 27 is undocumented in GX datasheet, - * it is documented in LX datasheet */ + * it is documented in LX datasheet */ /* load Mode Register by set and clear PROG_DRAM */ msr = rdmsr(MC_CF07_DATA); msr.lo |= ((0x01 << 27) | 0x01); -- cgit v1.2.3