From 58ce44720aac85381d2524ed520b71dce2c3f99c Mon Sep 17 00:00:00 2001 From: Maulik V Vaghela Date: Fri, 6 Nov 2020 10:56:57 +0530 Subject: soc/intel/jasperlake: Enable Intel FIVR RFI settings We already have RFI UPD settings to mitigate RFI noise issues in platform. These UPDs were not getting filled via devicetree but needed to be filled from fsp_params.c Exporting these UPDs to chip.h will allow OEM/ODMs to fill it directly from devicetree and also allow us to control it based on boards instead of keeping it common across SoCs. BUG=b:171683785 BRANCH=None TEST=Compilation works and we're able to fill UPD from devicetree.Value gets reflected in FSP UPDs. Change-Id: I495cd2294368e6b3035c48b9556a83418d5632de Signed-off-by: Maulik V Vaghela Reviewed-on: https://review.coreboot.org/c/coreboot/+/47286 Reviewed-by: EricR Lai Tested-by: build bot (Jenkins) --- src/soc/intel/jasperlake/chip.h | 18 ++++++++++++++++++ src/soc/intel/jasperlake/fsp_params.c | 4 ++++ 2 files changed, 22 insertions(+) diff --git a/src/soc/intel/jasperlake/chip.h b/src/soc/intel/jasperlake/chip.h index f157f9218b..0ed42050e9 100644 --- a/src/soc/intel/jasperlake/chip.h +++ b/src/soc/intel/jasperlake/chip.h @@ -341,6 +341,24 @@ struct soc_intel_jasperlake_config { * - PM_CFG.SLP_LAN_MIN_ASST_WDTH */ uint8_t PchPmPwrCycDur; + + /* + * FIVR RFI Frequency + * PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. + * 0: Auto. + * Range varies based on XTAL clock: + * 0-1918 (Up to 191.8HMz) for 24MHz clock; + * 0-1535 (Up to 153.5MHz) for 19MHz clock. + */ + uint16_t FivrRfiFrequency; + + /* + * FIVR RFI Spread Spectrum + * Set the Spread Spectrum Range. 0: 0%; + * FIVR RFI Spread Spectrum, in 0.1% increments. + * Range: 0.0% to 10.0% (0-100) + */ + uint8_t FivrSpreadSpectrum; }; typedef struct soc_intel_jasperlake_config config_t; diff --git a/src/soc/intel/jasperlake/fsp_params.c b/src/soc/intel/jasperlake/fsp_params.c index db27234067..92c35c62dc 100644 --- a/src/soc/intel/jasperlake/fsp_params.c +++ b/src/soc/intel/jasperlake/fsp_params.c @@ -216,6 +216,10 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) /* Provide correct UART number for FSP debug logs */ params->SerialIoDebugUartNumber = CONFIG_UART_FOR_CONSOLE; + /* Configure FIVR RFI related settings */ + params->FivrRfiFrequency = config->FivrRfiFrequency; + params->FivrSpreadSpectrum = config->FivrSpreadSpectrum; + /* Apply minimum assertion width settings if non-zero */ if (config->PchPmSlpS3MinAssert) params->PchPmSlpS3MinAssert = config->PchPmSlpS3MinAssert; -- cgit v1.2.3