From 4a12cfe759500e31200ec92677992038f10915ac Mon Sep 17 00:00:00 2001 From: Gabe Black Date: Mon, 24 Mar 2014 21:24:24 -0700 Subject: nyan: Move some pinmux and clock/reset configuration to ROM stage. To enable EFS, we need to be able to talk to the TPM and the EC before the RAM stage starts. That means we need to set up the pins for those busses, clock those controllers and take them out of reset. BUG=None TEST=Built for nyan, nyan_big, and nyan_blaze. Booted on nyan. With other changes which implement EFS on nyan, saw EC and TPM communication work when in vboot. BRANCH=None Original-Change-Id: Ic65d69fd42beec5f03084c8cb970927c2f69dfb6 Original-Signed-off-by: Gabe Black Original-Reviewed-on: https://chromium-review.googlesource.com/191390 Original-Reviewed-by: Gabe Black Original-Commit-Queue: Gabe Black Original-Tested-by: Gabe Black (cherry picked from commit d9c176536b1e2eba47fdca90dd3346052573223e) Signed-off-by: Marc Jones Change-Id: Id3117bd0c36f8b92d85cc0cefde2bed9d8de90d0 Reviewed-on: http://review.coreboot.org/7456 Reviewed-by: Stefan Reinauer Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks --- src/mainboard/google/nyan/mainboard.c | 61 +------------------- src/mainboard/google/nyan/romstage.c | 88 ++++++++++++++++++++++++++++- src/mainboard/google/nyan_big/mainboard.c | 62 +------------------- src/mainboard/google/nyan_big/romstage.c | 88 ++++++++++++++++++++++++++++- src/mainboard/google/nyan_blaze/mainboard.c | 62 +------------------- src/mainboard/google/nyan_blaze/romstage.c | 88 ++++++++++++++++++++++++++++- 6 files changed, 266 insertions(+), 183 deletions(-) diff --git a/src/mainboard/google/nyan/mainboard.c b/src/mainboard/google/nyan/mainboard.c index f521dcc4ef..dbca03ccae 100644 --- a/src/mainboard/google/nyan/mainboard.c +++ b/src/mainboard/google/nyan/mainboard.c @@ -39,14 +39,6 @@ static void set_clock_sources(void) * can both run at 400 KHz, but the kernel sets the bus to 100 KHz. */ clock_configure_i2c_scl_freq(i2c1, PLLP, 100); - /* - * The TPM is on I2C3 and can theoretically run at 400 KHz but doesn't - * seem to work above around 40 KHz. It's set to run at 100 KHz in the - * kernel. - */ - clock_configure_i2c_scl_freq(i2c3, PLLP, 40); - - clock_configure_source(sbc1, PLLP, 5000); /* * MMC3 and MMC4: Set base clock frequency for SD Clock to Tegra MMC's @@ -78,47 +70,6 @@ static void set_clock_sources(void) static void setup_pinmux(void) { - // Write protect. - gpio_input_pullup(GPIO(R1)); - // Recovery mode. - gpio_input_pullup(GPIO(Q7)); - // Lid switch. - gpio_input_pullup(GPIO(R4)); - // Power switch. - gpio_input_pullup(GPIO(Q0)); - // Developer mode. - gpio_input_pullup(GPIO(Q6)); - // EC in RW. - gpio_input_pullup(GPIO(U4)); - - // SOC and TPM reset GPIO, active low. - gpio_output(GPIO(I5), 1); - - // SPI1 MOSI - pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 MISO - pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 SCLK - pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 CS0 - pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - - // switch unused pin to GPIO - gpio_set_mode(GPIO(X3), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X4), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X5), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X6), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X7), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(W3), GPIO_MODE_GPIO); - // I2C1 clock. pinmux_set_config(PINMUX_GEN1_I2C_SCL_INDEX, PINMUX_GEN1_I2C_SCL_FUNC_I2C1 | PINMUX_INPUT_ENABLE); @@ -131,12 +82,6 @@ static void setup_pinmux(void) // I2C2 data. pinmux_set_config(PINMUX_GEN2_I2C_SDA_INDEX, PINMUX_GEN2_I2C_SDA_FUNC_I2C2 | PINMUX_INPUT_ENABLE); - // I2C3 (cam) clock. - pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX, - PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE); - // I2C3 (cam) data. - pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX, - PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE); // I2C4 (DDC) clock. pinmux_set_config(PINMUX_DDC_SCL_INDEX, PINMUX_DDC_SCL_FUNC_I2C4 | PINMUX_INPUT_ENABLE); @@ -271,10 +216,9 @@ static void mainboard_init(device_t dev) CLK_L_SPDIF | CLK_L_USBD | CLK_L_DISP1 | CLK_L_HOST1X | CLK_L_PWM, - CLK_H_I2C2 | CLK_H_SBC1 | CLK_H_PMC | - CLK_H_USB3, + CLK_H_I2C2 | CLK_H_PMC | CLK_H_USB3, - CLK_U_I2C3 | CLK_U_CSITE | CLK_U_SDMMC3, + CLK_U_CSITE | CLK_U_SDMMC3, CLK_V_I2C4 | CLK_V_EXTPERIPH1 | CLK_V_APBIF | CLK_V_AUDIO | CLK_V_I2S3 | CLK_V_I2S4 | @@ -295,7 +239,6 @@ static void mainboard_init(device_t dev) i2c_init(0); i2c_init(1); - i2c_init(2); i2c_init(3); setup_kernel_info(); diff --git a/src/mainboard/google/nyan/romstage.c b/src/mainboard/google/nyan/romstage.c index 175eb6fc3e..ee54a50ef7 100644 --- a/src/mainboard/google/nyan/romstage.c +++ b/src/mainboard/google/nyan/romstage.c @@ -20,17 +20,24 @@ #include #include #include +#include #include #include #include #include #include #include "sdram_configs.h" -#include "soc/nvidia/tegra124/chip.h" -#include "soc/nvidia/tegra124/sdram.h" +#include +#include +#include +#include +#include +#include #include #include +static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; + enum { L2CTLR_ECC_PARITY = 0x1 << 21, L2CTLR_TAG_RAM_LATENCY_MASK = 0x7 << 6, @@ -69,6 +76,74 @@ static void configure_l2actlr(void) write_l2actlr(val); } +static void setup_pinmux(void) +{ + // Write protect. + gpio_input_pullup(GPIO(R1)); + // Recovery mode. + gpio_input_pullup(GPIO(Q7)); + // Lid switch. + gpio_input_pullup(GPIO(R4)); + // Power switch. + gpio_input_pullup(GPIO(Q0)); + // Developer mode. + gpio_input_pullup(GPIO(Q6)); + // EC in RW. + gpio_input_pullup(GPIO(U4)); + + // SOC and TPM reset GPIO, active low. + gpio_output(GPIO(I5), 1); + + // SPI1 MOSI + pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 MISO + pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 SCLK + pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 CS0 + pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + + // I2C3 (cam) clock. + pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX, + PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE); + // I2C3 (cam) data. + pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX, + PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE); + + // switch unused pin to GPIO + gpio_set_mode(GPIO(X3), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X4), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X5), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X6), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X7), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(W3), GPIO_MODE_GPIO); +} + +static void configure_ec_spi_bus(void) +{ + clock_configure_source(sbc1, PLLP, 5000); +} + +static void configure_tpm_i2c_bus(void) +{ + /* + * The TPM is on I2C3 and can theoretically run at 400 KHz but doesn't + * seem to work above around 40 KHz. It's set to run at 100 KHz in the + * kernel. + */ + clock_configure_i2c_scl_freq(i2c3, PLLP, 40); + + i2c_init(2); +} + static void __attribute__((noinline)) romstage(void) { #if CONFIG_COLLECT_TIMESTAMPS @@ -130,6 +205,15 @@ static void __attribute__((noinline)) romstage(void) timestamp_add(TS_START_ROMSTAGE, romstage_start_time); timestamp_add(TS_START_COPYRAM, timestamp_get()); #endif + + // Enable additional peripherals we need for ROM stage. + clock_enable_clear_reset(0, CLK_H_SBC1, CLK_U_I2C3, 0, 0, 0); + + setup_pinmux(); + + configure_ec_spi_bus(); + configure_tpm_i2c_bus(); + void *entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram"); #if CONFIG_COLLECT_TIMESTAMPS diff --git a/src/mainboard/google/nyan_big/mainboard.c b/src/mainboard/google/nyan_big/mainboard.c index c77afd2c5a..997ceb0c2e 100644 --- a/src/mainboard/google/nyan_big/mainboard.c +++ b/src/mainboard/google/nyan_big/mainboard.c @@ -39,14 +39,6 @@ static void set_clock_sources(void) * can both run at 400 KHz, but the kernel sets the bus to 100 KHz. */ clock_configure_i2c_scl_freq(i2c1, PLLP, 100); - /* - * The TPM is on I2C3 and can theoretically run at 400 KHz but doesn't - * seem to work above around 40 KHz. It's set to run at 100 KHz in the - * kernel. - */ - clock_configure_i2c_scl_freq(i2c3, PLLP, 40); - - clock_configure_source(sbc1, PLLP, 5000); /* * MMC3 and MMC4: Set base clock frequency for SD Clock to Tegra MMC's @@ -78,47 +70,6 @@ static void set_clock_sources(void) static void setup_pinmux(void) { - // Write protect. - gpio_input_pullup(GPIO(R1)); - // Recovery mode. - gpio_input_pullup(GPIO(Q7)); - // Lid switch. - gpio_input_pullup(GPIO(R4)); - // Power switch. - gpio_input_pullup(GPIO(Q0)); - // Developer mode. - gpio_input_pullup(GPIO(Q6)); - // EC in RW. - gpio_input_pullup(GPIO(U4)); - - // SOC and TPM reset GPIO, active low. - gpio_output(GPIO(I5), 1); - - // SPI1 MOSI - pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 MISO - pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 SCLK - pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 CS0 - pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - - // switch unused pin to GPIO - gpio_set_mode(GPIO(X3), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X4), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X5), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X6), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X7), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(W3), GPIO_MODE_GPIO); - // I2C1 clock. pinmux_set_config(PINMUX_GEN1_I2C_SCL_INDEX, PINMUX_GEN1_I2C_SCL_FUNC_I2C1 | PINMUX_INPUT_ENABLE); @@ -131,12 +82,6 @@ static void setup_pinmux(void) // I2C2 data. pinmux_set_config(PINMUX_GEN2_I2C_SDA_INDEX, PINMUX_GEN2_I2C_SDA_FUNC_I2C2 | PINMUX_INPUT_ENABLE); - // I2C3 (cam) clock. - pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX, - PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE); - // I2C3 (cam) data. - pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX, - PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE); // I2C4 (DDC) clock. pinmux_set_config(PINMUX_DDC_SCL_INDEX, PINMUX_DDC_SCL_FUNC_I2C4 | PINMUX_INPUT_ENABLE); @@ -268,10 +213,10 @@ static void mainboard_init(device_t dev) CLK_L_SPDIF | CLK_L_USBD | CLK_L_DISP1 | CLK_L_HOST1X | CLK_L_PWM, - CLK_H_EMC | CLK_H_I2C2 | CLK_H_SBC1 | - CLK_H_PMC | CLK_H_MEM | CLK_H_USB3, + CLK_H_EMC | CLK_H_I2C2 | CLK_H_PMC | + CLK_H_MEM | CLK_H_USB3, - CLK_U_I2C3 | CLK_U_CSITE | CLK_U_SDMMC3, + CLK_U_CSITE | CLK_U_SDMMC3, CLK_V_I2C4 | CLK_V_EXTPERIPH1 | CLK_V_APBIF | CLK_V_AUDIO | CLK_V_I2S3 | CLK_V_I2S4 | @@ -292,7 +237,6 @@ static void mainboard_init(device_t dev) i2c_init(0); i2c_init(1); - i2c_init(2); i2c_init(3); setup_kernel_info(); diff --git a/src/mainboard/google/nyan_big/romstage.c b/src/mainboard/google/nyan_big/romstage.c index 51f5a49264..e1597c8ba9 100644 --- a/src/mainboard/google/nyan_big/romstage.c +++ b/src/mainboard/google/nyan_big/romstage.c @@ -20,17 +20,24 @@ #include #include #include +#include #include #include #include #include #include #include "sdram_configs.h" -#include "soc/nvidia/tegra124/chip.h" -#include "soc/nvidia/tegra124/sdram.h" +#include +#include +#include +#include +#include +#include #include #include +static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; + enum { L2CTLR_ECC_PARITY = 0x1 << 21, L2CTLR_TAG_RAM_LATENCY_MASK = 0x7 << 6, @@ -69,6 +76,74 @@ static void configure_l2actlr(void) write_l2actlr(val); } +static void setup_pinmux(void) +{ + // Write protect. + gpio_input_pullup(GPIO(R1)); + // Recovery mode. + gpio_input_pullup(GPIO(Q7)); + // Lid switch. + gpio_input_pullup(GPIO(R4)); + // Power switch. + gpio_input_pullup(GPIO(Q0)); + // Developer mode. + gpio_input_pullup(GPIO(Q6)); + // EC in RW. + gpio_input_pullup(GPIO(U4)); + + // SOC and TPM reset GPIO, active low. + gpio_output(GPIO(I5), 1); + + // SPI1 MOSI + pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 MISO + pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 SCLK + pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 CS0 + pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + + // I2C3 (cam) clock. + pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX, + PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE); + // I2C3 (cam) data. + pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX, + PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE); + + // switch unused pin to GPIO + gpio_set_mode(GPIO(X3), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X4), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X5), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X6), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X7), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(W3), GPIO_MODE_GPIO); +} + +static void configure_ec_spi_bus(void) +{ + clock_configure_source(sbc1, PLLP, 5000); +} + +static void configure_tpm_i2c_bus(void) +{ + /* + * The TPM is on I2C3 and can theoretically run at 400 KHz but doesn't + * seem to work above around 40 KHz. It's set to run at 100 KHz in the + * kernel. + */ + clock_configure_i2c_scl_freq(i2c3, PLLP, 40); + + i2c_init(2); +} + static void __attribute__((noinline)) romstage(void) { #if CONFIG_COLLECT_TIMESTAMPS @@ -130,6 +205,15 @@ static void __attribute__((noinline)) romstage(void) timestamp_add(TS_START_ROMSTAGE, romstage_start_time); timestamp_add(TS_START_COPYRAM, timestamp_get()); #endif + + // Enable additional peripherals we need for ROM stage. + clock_enable_clear_reset(0, CLK_H_SBC1, CLK_U_I2C3, 0, 0, 0); + + setup_pinmux(); + + configure_ec_spi_bus(); + configure_tpm_i2c_bus(); + void *entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram"); #if CONFIG_COLLECT_TIMESTAMPS diff --git a/src/mainboard/google/nyan_blaze/mainboard.c b/src/mainboard/google/nyan_blaze/mainboard.c index 11c60ef9bc..dc105c6976 100644 --- a/src/mainboard/google/nyan_blaze/mainboard.c +++ b/src/mainboard/google/nyan_blaze/mainboard.c @@ -39,14 +39,6 @@ static void set_clock_sources(void) * can both run at 400 KHz, but the kernel sets the bus to 100 KHz. */ clock_configure_i2c_scl_freq(i2c1, PLLP, 100); - /* - * The TPM is on I2C3 and can theoretically run at 400 KHz but doesn't - * seem to work above around 40 KHz. It's set to run at 100 KHz in the - * kernel. - */ - clock_configure_i2c_scl_freq(i2c3, PLLP, 40); - - clock_configure_source(sbc1, PLLP, 5000); /* * MMC3 and MMC4: Set base clock frequency for SD Clock to Tegra MMC's @@ -78,47 +70,6 @@ static void set_clock_sources(void) static void setup_pinmux(void) { - // Write protect. - gpio_input_pullup(GPIO(R1)); - // Recovery mode. - gpio_input_pullup(GPIO(Q7)); - // Lid switch. - gpio_input_pullup(GPIO(R4)); - // Power switch. - gpio_input_pullup(GPIO(Q0)); - // Developer mode. - gpio_input_pullup(GPIO(Q6)); - // EC in RW. - gpio_input_pullup(GPIO(U4)); - - // SOC and TPM reset GPIO, active low. - gpio_output(GPIO(I5), 1); - - // SPI1 MOSI - pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 MISO - pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 SCLK - pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - // SPI1 CS0 - pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 | - PINMUX_PULL_NONE | - PINMUX_INPUT_ENABLE); - - // switch unused pin to GPIO - gpio_set_mode(GPIO(X3), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X4), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X5), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X6), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(X7), GPIO_MODE_GPIO); - gpio_set_mode(GPIO(W3), GPIO_MODE_GPIO); - // I2C1 clock. pinmux_set_config(PINMUX_GEN1_I2C_SCL_INDEX, PINMUX_GEN1_I2C_SCL_FUNC_I2C1 | PINMUX_INPUT_ENABLE); @@ -131,12 +82,6 @@ static void setup_pinmux(void) // I2C2 data. pinmux_set_config(PINMUX_GEN2_I2C_SDA_INDEX, PINMUX_GEN2_I2C_SDA_FUNC_I2C2 | PINMUX_INPUT_ENABLE); - // I2C3 (cam) clock. - pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX, - PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE); - // I2C3 (cam) data. - pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX, - PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE); // I2C4 (DDC) clock. pinmux_set_config(PINMUX_DDC_SCL_INDEX, PINMUX_DDC_SCL_FUNC_I2C4 | PINMUX_INPUT_ENABLE); @@ -268,10 +213,10 @@ static void mainboard_init(device_t dev) CLK_L_SPDIF | CLK_L_USBD | CLK_L_DISP1 | CLK_L_HOST1X | CLK_L_PWM, - CLK_H_EMC | CLK_H_I2C2 | CLK_H_SBC1 | - CLK_H_PMC | CLK_H_MEM | CLK_H_USB3, + CLK_H_EMC | CLK_H_I2C2 | CLK_H_PMC | + CLK_H_MEM | CLK_H_USB3, - CLK_U_I2C3 | CLK_U_CSITE | CLK_U_SDMMC3, + CLK_U_CSITE | CLK_U_SDMMC3, CLK_V_I2C4 | CLK_V_EXTPERIPH1 | CLK_V_APBIF | CLK_V_AUDIO | CLK_V_I2S3 | CLK_V_I2S4 | @@ -292,7 +237,6 @@ static void mainboard_init(device_t dev) i2c_init(0); i2c_init(1); - i2c_init(2); i2c_init(3); setup_kernel_info(); diff --git a/src/mainboard/google/nyan_blaze/romstage.c b/src/mainboard/google/nyan_blaze/romstage.c index 51f5a49264..e1597c8ba9 100644 --- a/src/mainboard/google/nyan_blaze/romstage.c +++ b/src/mainboard/google/nyan_blaze/romstage.c @@ -20,17 +20,24 @@ #include #include #include +#include #include #include #include #include #include #include "sdram_configs.h" -#include "soc/nvidia/tegra124/chip.h" -#include "soc/nvidia/tegra124/sdram.h" +#include +#include +#include +#include +#include +#include #include #include +static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE; + enum { L2CTLR_ECC_PARITY = 0x1 << 21, L2CTLR_TAG_RAM_LATENCY_MASK = 0x7 << 6, @@ -69,6 +76,74 @@ static void configure_l2actlr(void) write_l2actlr(val); } +static void setup_pinmux(void) +{ + // Write protect. + gpio_input_pullup(GPIO(R1)); + // Recovery mode. + gpio_input_pullup(GPIO(Q7)); + // Lid switch. + gpio_input_pullup(GPIO(R4)); + // Power switch. + gpio_input_pullup(GPIO(Q0)); + // Developer mode. + gpio_input_pullup(GPIO(Q6)); + // EC in RW. + gpio_input_pullup(GPIO(U4)); + + // SOC and TPM reset GPIO, active low. + gpio_output(GPIO(I5), 1); + + // SPI1 MOSI + pinmux_set_config(PINMUX_ULPI_CLK_INDEX, PINMUX_ULPI_CLK_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 MISO + pinmux_set_config(PINMUX_ULPI_DIR_INDEX, PINMUX_ULPI_DIR_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 SCLK + pinmux_set_config(PINMUX_ULPI_NXT_INDEX, PINMUX_ULPI_NXT_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + // SPI1 CS0 + pinmux_set_config(PINMUX_ULPI_STP_INDEX, PINMUX_ULPI_STP_FUNC_SPI1 | + PINMUX_PULL_NONE | + PINMUX_INPUT_ENABLE); + + // I2C3 (cam) clock. + pinmux_set_config(PINMUX_CAM_I2C_SCL_INDEX, + PINMUX_CAM_I2C_SCL_FUNC_I2C3 | PINMUX_INPUT_ENABLE); + // I2C3 (cam) data. + pinmux_set_config(PINMUX_CAM_I2C_SDA_INDEX, + PINMUX_CAM_I2C_SDA_FUNC_I2C3 | PINMUX_INPUT_ENABLE); + + // switch unused pin to GPIO + gpio_set_mode(GPIO(X3), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X4), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X5), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X6), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(X7), GPIO_MODE_GPIO); + gpio_set_mode(GPIO(W3), GPIO_MODE_GPIO); +} + +static void configure_ec_spi_bus(void) +{ + clock_configure_source(sbc1, PLLP, 5000); +} + +static void configure_tpm_i2c_bus(void) +{ + /* + * The TPM is on I2C3 and can theoretically run at 400 KHz but doesn't + * seem to work above around 40 KHz. It's set to run at 100 KHz in the + * kernel. + */ + clock_configure_i2c_scl_freq(i2c3, PLLP, 40); + + i2c_init(2); +} + static void __attribute__((noinline)) romstage(void) { #if CONFIG_COLLECT_TIMESTAMPS @@ -130,6 +205,15 @@ static void __attribute__((noinline)) romstage(void) timestamp_add(TS_START_ROMSTAGE, romstage_start_time); timestamp_add(TS_START_COPYRAM, timestamp_get()); #endif + + // Enable additional peripherals we need for ROM stage. + clock_enable_clear_reset(0, CLK_H_SBC1, CLK_U_I2C3, 0, 0, 0); + + setup_pinmux(); + + configure_ec_spi_bus(); + configure_tpm_i2c_bus(); + void *entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram"); #if CONFIG_COLLECT_TIMESTAMPS -- cgit v1.2.3