From 4781800a66452ebfa2838dab89462dc0afd842e8 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 30 Mar 2012 16:19:31 -0700 Subject: Don't loop infinitely long on serial comm failures MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If serial uart (8250/16x50) takes abnormally long to respond, give up on logging to serial console and instead let the system boot. Also reference bit in LSR register with correct name. Signed-off-by: Kyösti Mälkki Ported from 9dd3ef165a1bf1bc404056d3e54337de1a15ac90 to uart8250mem.c: Signed-off-by: Stefan Reinauer Change-Id: Iaca4f57389c887110e6406d45053935891c96838 Reviewed-on: http://review.coreboot.org/826 Reviewed-by: Ronald G. Minnich Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge Reviewed-by: Kyösti Mälkki --- src/lib/uart8250mem.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/src/lib/uart8250mem.c b/src/lib/uart8250mem.c index a38623edbc..b98cb0e2a1 100644 --- a/src/lib/uart8250mem.c +++ b/src/lib/uart8250mem.c @@ -27,24 +27,34 @@ #if !defined(__SMM__) && !defined(__PRE_RAM__) #include #endif +#include /* Should support 8250, 16450, 16550, 16550A type UARTs */ +/* Expected character delay at 1200bps is 9ms for a working UART + * and no flow-control. Assume UART as stuck if shift register + * or FIFO takes more than 50ms per character to appear empty. + */ +#define SINGLE_CHAR_TIMEOUT (50 * 1000) +#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT) + static inline int uart8250_mem_can_tx_byte(unsigned base_port) { - return read8(base_port + UART_LSR) & UART_MSR_DSR; + return read8(base_port + UART_LSR) & UART_LSR_THRE; } static inline void uart8250_mem_wait_to_tx_byte(unsigned base_port) { - while(!uart8250_mem_can_tx_byte(base_port)) - ; + unsigned long int i = SINGLE_CHAR_TIMEOUT; + while(i-- && !uart8250_mem_can_tx_byte(base_port)) + udelay(1); } static inline void uart8250_mem_wait_until_sent(unsigned base_port) { - while(!(read8(base_port + UART_LSR) & UART_LSR_TEMT)) - ; + unsigned long int i = FIFO_TIMEOUT; + while(i-- && !(read8(base_port + UART_LSR) & UART_LSR_TEMT)) + udelay(1); } void uart8250_mem_tx_byte(unsigned base_port, unsigned char data) @@ -65,9 +75,13 @@ int uart8250_mem_can_rx_byte(unsigned base_port) unsigned char uart8250_mem_rx_byte(unsigned base_port) { - while(!uart8250_mem_can_rx_byte(base_port)) - ; - return read8(base_port + UART_RBR); + unsigned long int i = SINGLE_CHAR_TIMEOUT; + while(i-- && !uart8250_mem_can_rx_byte(base_port)) + udelay(1); + if (i) + return read8(base_port + UART_RBR); + else + return 0x0; } void uart8250_mem_init(unsigned base_port, unsigned divisor) @@ -83,7 +97,7 @@ void uart8250_mem_init(unsigned base_port, unsigned divisor) /* DLAB on */ write8(base_port + UART_LCR, UART_LCR_DLAB | CONFIG_TTYS0_LCS); - /* Set Baud Rate Divisor. 12 ==> 115200 Baud */ + /* Set Baud Rate Divisor. 12 ==> 9600 Baud */ write8(base_port + UART_DLL, divisor & 0xFF); write8(base_port + UART_DLM, (divisor >> 8) & 0xFF); -- cgit v1.2.3