From 373511b2f96807d7a7a6b0b34ad3e7519c311aee Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 2 Dec 2005 23:16:01 +0000 Subject: issue 41 - fix up motherboard compilation. There's always hope. 1201_ht_bus0_dev0_fidvid_mb.diff part 1 git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2120 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/Iwill/DK8S2/Options.lb | 2 +- src/mainboard/Iwill/DK8S2/auto.c | 2 +- src/mainboard/Iwill/DK8S2/cmos.layout | 26 +- src/mainboard/Iwill/DK8X/auto.c | 2 +- src/mainboard/agami/aruma/Options.lb | 9 + src/mainboard/agami/aruma/auto.c | 8 +- src/mainboard/agami/aruma/cmos.layout | 5 +- src/mainboard/agami/aruma/mainboard.c | 2 +- src/mainboard/amd/quartet/Options.lb | 2 +- src/mainboard/amd/quartet/auto.c | 7 +- src/mainboard/amd/quartet/cmos.layout | 2 + src/mainboard/amd/serenade/Options.lb | 2 +- src/mainboard/amd/serenade/auto.c | 2 +- src/mainboard/amd/serenade/cmos.layout | 10 +- src/mainboard/amd/serengeti_leopard/Config.lb | 188 +++++---- src/mainboard/amd/serengeti_leopard/Options.lb | 58 ++- src/mainboard/amd/serengeti_leopard/acpi_tables.c | 44 +-- src/mainboard/amd/serengeti_leopard/auto.c | 42 +- .../amd/serengeti_leopard/cache_as_ram_auto.c | 421 +++++---------------- src/mainboard/amd/serengeti_leopard/dsdt.c | 39 -- src/mainboard/amd/serengeti_leopard/dx/amd8111.asl | 38 +- .../amd/serengeti_leopard/dx/amd8111_isa.asl | 38 +- .../amd/serengeti_leopard/dx/amd8111_pic.asl | 38 +- src/mainboard/amd/serengeti_leopard/dx/amd8131.asl | 39 +- src/mainboard/amd/serengeti_leopard/dx/amd8151.asl | 36 -- .../amd/serengeti_leopard/dx/amdk8_util.asl | 39 +- src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl | 38 +- src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl | 36 -- src/mainboard/amd/serengeti_leopard/dx/pci2.asl | 38 +- src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl | 36 -- src/mainboard/amd/serengeti_leopard/dx/superio.asl | 36 -- src/mainboard/amd/serengeti_leopard/fadt.c | 36 -- src/mainboard/amd/serengeti_leopard/failover.c | 36 -- src/mainboard/amd/serengeti_leopard/get_bus_conf.c | 60 +-- src/mainboard/amd/serengeti_leopard/irq_tables.c | 58 +-- src/mainboard/amd/serengeti_leopard/mainboard.c | 36 -- src/mainboard/amd/serengeti_leopard/mptable.c | 46 +-- .../amd/serengeti_leopard/readme_acpi.txt | 38 -- src/mainboard/amd/serengeti_leopard/resourcemap.c | 12 +- src/mainboard/amd/serengeti_leopard/ssdt.c | 37 -- src/mainboard/amd/serengeti_leopard/ssdt2.c | 37 -- src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl | 39 +- src/mainboard/amd/solo/Options.lb | 2 +- src/mainboard/amd/solo/auto.c | 6 +- src/mainboard/amd/solo/cmos.layout | 2 + src/mainboard/arima/hdama/Options.lb | 2 +- src/mainboard/arima/hdama/auto.c | 20 +- src/mainboard/ibm/e325/Options.lb | 2 +- src/mainboard/ibm/e325/auto.c | 2 +- src/mainboard/ibm/e325/cmos.layout | 10 +- src/mainboard/ibm/e326/Options.lb | 2 +- src/mainboard/ibm/e326/auto.c | 2 +- src/mainboard/ibm/e326/cmos.layout | 10 +- src/mainboard/newisys/khepri/Options.lb | 2 +- src/mainboard/newisys/khepri/auto.c | 2 +- src/mainboard/tyan/s2850/Options.lb | 8 +- src/mainboard/tyan/s2850/auto.c | 2 +- src/mainboard/tyan/s2850/cache_as_ram_auto.c | 23 +- src/mainboard/tyan/s2875/auto.c | 2 +- src/mainboard/tyan/s2875/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s2880/Config.lb | 10 +- src/mainboard/tyan/s2880/auto.c | 2 +- src/mainboard/tyan/s2880/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s2881/auto.c | 2 +- src/mainboard/tyan/s2881/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s2882/auto.c | 2 +- src/mainboard/tyan/s2882/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s2882/irq_tables.c | 335 ++++++++++++++-- src/mainboard/tyan/s2885/auto.c | 2 +- src/mainboard/tyan/s2885/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s2891/auto.c | 2 +- src/mainboard/tyan/s2891/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s2891/irq_tables.c | 305 ++++++++++++++- src/mainboard/tyan/s2892/auto.c | 2 +- src/mainboard/tyan/s2892/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s2895/auto.c | 4 +- src/mainboard/tyan/s2895/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s4880/Config.lb | 10 +- src/mainboard/tyan/s4880/auto.c | 2 +- src/mainboard/tyan/s4880/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s4882/auto.c | 2 +- src/mainboard/tyan/s4882/cache_as_ram_auto.c | 2 +- src/mainboard/tyan/s4882/mptable.c | 57 ++- 83 files changed, 1117 insertions(+), 1459 deletions(-) diff --git a/src/mainboard/Iwill/DK8S2/Options.lb b/src/mainboard/Iwill/DK8S2/Options.lb index 5cb440f504..c0a1043c16 100644 --- a/src/mainboard/Iwill/DK8S2/Options.lb +++ b/src/mainboard/Iwill/DK8S2/Options.lb @@ -60,7 +60,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot diff --git a/src/mainboard/Iwill/DK8S2/auto.c b/src/mainboard/Iwill/DK8S2/auto.c index b771b3f0f1..9a301fb9d4 100644 --- a/src/mainboard/Iwill/DK8S2/auto.c +++ b/src/mainboard/Iwill/DK8S2/auto.c @@ -19,7 +19,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/Iwill/DK8S2/cmos.layout b/src/mainboard/Iwill/DK8S2/cmos.layout index f5325d15e8..0daae9221d 100644 --- a/src/mainboard/Iwill/DK8S2/cmos.layout +++ b/src/mainboard/Iwill/DK8S2/cmos.layout @@ -29,9 +29,10 @@ entries 386 1 e 1 ECC_memory 388 4 r 0 reboot_bits 392 3 e 5 baud_rate +395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock - +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -39,8 +40,15 @@ entries 424 4 e 7 boot_third 428 4 h 0 boot_index 432 8 h 0 boot_countdown +440 4 e 9 slow_cpu 444 1 e 1 nmi -1008 16 h 0 check_sum +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + enumerations @@ -70,7 +78,21 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% checksums checksum 392 983 984 + + diff --git a/src/mainboard/Iwill/DK8X/auto.c b/src/mainboard/Iwill/DK8X/auto.c index 1552324410..0883b26fc9 100644 --- a/src/mainboard/Iwill/DK8X/auto.c +++ b/src/mainboard/Iwill/DK8X/auto.c @@ -19,7 +19,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" diff --git a/src/mainboard/agami/aruma/Options.lb b/src/mainboard/agami/aruma/Options.lb index 9fab69b82a..967b314428 100644 --- a/src/mainboard/agami/aruma/Options.lb +++ b/src/mainboard/agami/aruma/Options.lb @@ -52,6 +52,11 @@ uses CONFIG_PCI_ROM_RUN uses CONFIG_USE_INIT +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID + + ### ### Build options ### @@ -112,6 +117,10 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=4 #default ALLOW_HT_OVERCLOCKING=1 +default ENABLE_APIC_EXT_ID=0 +default APIC_ID_OFFSET=0x10 +default LIFT_BSP_APIC_ID=0 + ## ## Build code to setup a generic IOAPIC ## diff --git a/src/mainboard/agami/aruma/auto.c b/src/mainboard/agami/aruma/auto.c index a522174932..48f83faadf 100644 --- a/src/mainboard/agami/aruma/auto.c +++ b/src/mainboard/agami/aruma/auto.c @@ -1,6 +1,4 @@ #define ASSEMBLY 1 -#define ENABLE_APIC_EXT_ID 1 -#define APIC_ID_OFFSET 0x10 #include #include #include @@ -20,12 +18,10 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -93,6 +89,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "cpu/amd/dualcore/dualcore.c" #include "sdram/generic_sdram.c" #include "resourcemap.c" diff --git a/src/mainboard/agami/aruma/cmos.layout b/src/mainboard/agami/aruma/cmos.layout index d0b05a9876..c1f3d75316 100644 --- a/src/mainboard/agami/aruma/cmos.layout +++ b/src/mainboard/agami/aruma/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -42,10 +43,6 @@ entries 440 4 e 9 slow_cpu 444 1 e 1 nmi 445 1 e 1 iommu -# These two can be used to control link speeds. byte 56 -449 1 e 1 amdk8_1GHz -450 1 e 1 amd8131_800MHz -# 728 256 h 0 user_data 984 16 h 0 check_sum # Reserve the extended AMD configuration registers diff --git a/src/mainboard/agami/aruma/mainboard.c b/src/mainboard/agami/aruma/mainboard.c index 8670939330..3a4a42e906 100644 --- a/src/mainboard/agami/aruma/mainboard.c +++ b/src/mainboard/agami/aruma/mainboard.c @@ -10,7 +10,7 @@ #include #include "../../../northbridge/amd/amdk8/northbridge.h" -#include "../../../northbridge/amd/amdk8/cpu_rev.c" +#include #include "chip.h" #include "pc80/mc146818rtc.h" diff --git a/src/mainboard/amd/quartet/Options.lb b/src/mainboard/amd/quartet/Options.lb index f1013eaadf..54e908dd34 100644 --- a/src/mainboard/amd/quartet/Options.lb +++ b/src/mainboard/amd/quartet/Options.lb @@ -59,7 +59,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c index 6ab2ea8208..45ccbfbbca 100644 --- a/src/mainboard/amd/quartet/auto.c +++ b/src/mainboard/amd/quartet/auto.c @@ -14,7 +14,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -22,11 +21,10 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -154,6 +152,9 @@ static inline int spd_read_byte(unsigned device, unsigned address) // #include "northbridge/amd/amdk8/setup_resource_map.c" #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "cpu/amd/dualcore/dualcore.c" + #include "sdram/generic_sdram.c" /* quartet does not want the default */ #include "resourcemap.c" diff --git a/src/mainboard/amd/quartet/cmos.layout b/src/mainboard/amd/quartet/cmos.layout index 247715e6ac..c1f3d75316 100644 --- a/src/mainboard/amd/quartet/cmos.layout +++ b/src/mainboard/amd/quartet/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -41,6 +42,7 @@ entries 432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi +445 1 e 1 iommu 728 256 h 0 user_data 984 16 h 0 check_sum # Reserve the extended AMD configuration registers diff --git a/src/mainboard/amd/serenade/Options.lb b/src/mainboard/amd/serenade/Options.lb index a26f2709f8..6b686806c1 100644 --- a/src/mainboard/amd/serenade/Options.lb +++ b/src/mainboard/amd/serenade/Options.lb @@ -58,7 +58,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot diff --git a/src/mainboard/amd/serenade/auto.c b/src/mainboard/amd/serenade/auto.c index f1104bdb86..b959328768 100644 --- a/src/mainboard/amd/serenade/auto.c +++ b/src/mainboard/amd/serenade/auto.c @@ -21,7 +21,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/amd/serenade/cmos.layout b/src/mainboard/amd/serenade/cmos.layout index 247715e6ac..0daae9221d 100644 --- a/src/mainboard/amd/serenade/cmos.layout +++ b/src/mainboard/amd/serenade/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -41,6 +42,7 @@ entries 432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi +445 1 e 1 iommu 728 256 h 0 user_data 984 16 h 0 check_sum # Reserve the extended AMD configuration registers @@ -76,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/amd/serengeti_leopard/Config.lb b/src/mainboard/amd/serengeti_leopard/Config.lb index aea3dec107..32065bbeb2 100644 --- a/src/mainboard/amd/serengeti_leopard/Config.lb +++ b/src/mainboard/amd/serengeti_leopard/Config.lb @@ -45,17 +45,25 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end +if HAVE_MP_TABLE + object mptable.o +end + if HAVE_PIRQ_TABLE object irq_tables.o end if HAVE_ACPI_TABLES - object acpi_tables.o - object fadt.o - object dsdt.o - object ssdt.o - if ACPI_SSDTX_NUM + object acpi_tables.o + object fadt.o + if K8_SB_HT_CHAIN_ON_BUS0 + object dsdt_bus0.o + else + object dsdt.o + end + object ssdt.o + if ACPI_SSDTX_NUM + if K8_SB_HT_CHAIN_ON_BUS0 object ssdt2.o # object ssdt3.o # object ssdt4.o @@ -63,6 +71,15 @@ if HAVE_ACPI_TABLES # object ssdt6.o # object ssdt7.o # object ssdt8.o + else + object ssdt2_bus0.o + # object ssdt3_bus0.o + # object ssdt4_bus0.o + # object ssdt5_bus0.o + # object ssdt6_bus0.o + # object ssdt7_bus0.o + # object ssdt8_bus0.o + end end end @@ -70,61 +87,65 @@ object reset.o if USE_DCACHE_RAM -if CONFIG_USE_INIT - -makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" -end + if CONFIG_USE_INIT + # compile cache_as_ram.c to auto.o + makerule ./cache_as_ram_auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o cache_as_ram_auto.o" + end -else - -makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" -end + else + #compile cache_as_ram.c to auto.inc + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end -end + end else -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/x86/16bit/entry16.inc + +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds +end + mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/x86/32bit/entry32.lds end if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds + ldscript /cpu/amd/car/cache_as_ram.lds end end @@ -141,8 +162,8 @@ end if USE_DCACHE_RAM else -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc end ## @@ -152,10 +173,10 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds if USE_DCACHE_RAM -## -## Setup Cache-As-Ram -## -mainboardinit cpu/amd/car/cache_as_ram.inc + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc end ### @@ -164,12 +185,12 @@ end ### failover to another image. ### if USE_FALLBACK_IMAGE -if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds -else - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc + end end ### @@ -181,23 +202,23 @@ end ## if USE_DCACHE_RAM -if CONFIG_USE_INIT -initobject auto.o -else -mainboardinit ./auto.inc -end + if CONFIG_USE_INIT + initobject cache_as_ram_auto.o + else + mainboardinit ./cache_as_ram_auto.inc + end else -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc + ## + ## Setup RAM + ## + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc end @@ -208,7 +229,7 @@ if CONFIG_CHIP_NAME config chip.h end -# sample config for amd/serengeti_leopard +# sample config for amd/serengeti_cheetah chip northbridge/amd/amdk8/root_complex device apic_cluster 0 on chip cpu/amd/socket_940 @@ -237,7 +258,7 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.0 on chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 drq 0x74 = 2 @@ -250,7 +271,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x3f8 irq 0x70 = 4 end - device pnp 2e.3 on # Com2 + device pnp 2e.3 off # Com2 io 0x60 = 0x2f8 irq 0x70 = 3 end @@ -282,20 +303,32 @@ chip northbridge/amd/amdk8/root_complex device pci 1.3 on chip drivers/i2c/i2cmux # pca9556 smbus mux device i2c 18 on #0 pca9516 1 - chip drivers/generic/generic #dimm 1-0-0 + chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end - chip drivers/generic/generic #dimm 1-0-1 + chip drivers/generic/generic #dimm 0-0-1 device i2c 51 on end end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end end device i2c 18 on #1 pca9516 2 - chip drivers/generic/generic #dimm 0-0-0 + chip drivers/generic/generic #dimm 1-0-0 device i2c 50 on end end - chip drivers/generic/generic #dimm 0-0-1 + chip drivers/generic/generic #dimm 1-0-1 device i2c 51 on end end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 53 on end + end end end end # acpi @@ -330,7 +363,7 @@ chip northbridge/amd/amdk8/root_complex end #pci_domain -# chip drivers/generic/debug +# chip drivers/generic/debug # device pnp 0.0 off end # chip name # device pnp 0.1 on end # pci_regs_all # device pnp 0.2 off end # mem @@ -343,3 +376,4 @@ chip northbridge/amd/amdk8/root_complex end + diff --git a/src/mainboard/amd/serengeti_leopard/Options.lb b/src/mainboard/amd/serengeti_leopard/Options.lb index a2bf814ebd..4164454c8f 100644 --- a/src/mainboard/amd/serengeti_leopard/Options.lb +++ b/src/mainboard/amd/serengeti_leopard/Options.lb @@ -54,13 +54,29 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_E0_MEM_HOLE_SIZEK +uses K8_HW_MEM_HOLE_SIZEK +uses K8_HW_MEM_HOLE_SIZE_AUTO_INC +uses K8_HT_FREQ_1G_SUPPORT + +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY uses USE_DCACHE_RAM uses DCACHE_RAM_BASE uses DCACHE_RAM_SIZE uses CONFIG_USE_INIT +uses SERIAL_CPU_INIT + +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID + +uses CONFIG_PCI_64BIT_PREF_MEM + + ### ### Build options ### @@ -73,7 +89,9 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +#default FALLBACK_SIZE=131072 +#256K +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot @@ -123,23 +141,51 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +#default SERIAL_CPU_INIT=0 + +default ENABLE_APIC_EXT_ID=0 +default APIC_ID_OFFSET=0x8 +default LIFT_BSP_APIC_ID=0 + #CHIP_NAME ? default CONFIG_CHIP_NAME=1 -#1G memory hole -default K8_E0_MEM_HOLE_SIZEK=0x100000 +#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. +#2G +default K8_HW_MEM_HOLE_SIZEK=0x200000 +#1G +#default K8_HW_MEM_HOLE_SIZEK=0x100000 +#512M +#default K8_HW_MEM_HOLE_SIZEK=0x80000 + +#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy +#default K8_HW_MEM_HOLE_SIZE_AUTO_INC=1 + +#Opteron K8 1G HT Support +default K8_HT_FREQ_1G_SUPPORT=1 #VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 +#HT Unit ID offset +default HT_CHAIN_UNITID_BASE=0x4 + +#real SB Unit ID +default HT_CHAIN_END_UNITID_BASE=0x1 + +#make the SB HT chain on bus 0 +default K8_SB_HT_CHAIN_ON_BUS0=1 + +#allow capable device use that above 4G +#default CONFIG_PCI_64BIT_PREF_MEM=1 ## ## enable CACHE_AS_RAM specifics ## default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default DCACHE_RAM_BASE=0xcc000 +default DCACHE_RAM_SIZE=0x4000 default CONFIG_USE_INIT=1 ## diff --git a/src/mainboard/amd/serengeti_leopard/acpi_tables.c b/src/mainboard/amd/serengeti_leopard/acpi_tables.c index bafc6ad667..9f74c9bcbd 100644 --- a/src/mainboard/amd/serengeti_leopard/acpi_tables.c +++ b/src/mainboard/amd/serengeti_leopard/acpi_tables.c @@ -1,36 +1,7 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ /* - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB + * + * Copyright 2005 AMD + * 2005.9 yhlu make it more dynamic for AMD Opteron Based MB */ #include @@ -41,7 +12,7 @@ acknowledgement of AMD's proprietary rights in them. #include #include -#define DUMP_ACPI_TABLES 1 +#define DUMP_ACPI_TABLES 0 #if DUMP_ACPI_TABLES == 1 static void dump_mem(unsigned start, unsigned end) @@ -107,7 +78,7 @@ unsigned long acpi_fill_madt(unsigned long current) { device_t dev; struct resource *res; - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x1,1)); + dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x1 + HT_CHAIN_UNITID_BASE - 1, 1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -117,7 +88,7 @@ unsigned long acpi_fill_madt(unsigned long current) } } - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x2,1)); + dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x2 + HT_CHAIN_UNITID_BASE - 1, 1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -248,7 +219,7 @@ unsigned long write_acpi_tables(unsigned long start) acpi_write_rsdp(rsdp, rsdt); acpi_write_rsdt(rsdt); - + /* * We explicitly add these tables later on: */ @@ -265,6 +236,7 @@ unsigned long write_acpi_tables(unsigned long start) current+=madt->header.length; acpi_add_table(rsdt,madt); + /* SRAT */ printk_debug("ACPI: * SRAT\n"); srat = (acpi_srat_t *) current; diff --git a/src/mainboard/amd/serengeti_leopard/auto.c b/src/mainboard/amd/serengeti_leopard/auto.c index c152669175..b833f71e6c 100644 --- a/src/mainboard/amd/serengeti_leopard/auto.c +++ b/src/mainboard/amd/serengeti_leopard/auto.c @@ -1,38 +1,3 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= #define ASSEMBLY 1 #include @@ -54,7 +19,7 @@ acknowledgement of AMD's proprietary rights in them. #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" @@ -182,11 +147,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#else -#include "cpu/amd/model_fxx/node_id.c" #endif +#include "cpu/amd/dualcore/dualcore.c" + #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) diff --git a/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c b/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c index 6981b2f52d..b81caf0406 100644 --- a/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c +++ b/src/mainboard/amd/serengeti_leopard/cache_as_ram_auto.c @@ -1,42 +1,28 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - #define ASSEMBLY 1 #define __ROMCC__ - + +#define RAMINIT_SYSINFO 0 + +#if CONFIG_LOGICAL_CPUS==1 + #define SET_NB_CFG_54 1 +#endif + +//use by raminit +#define K8_4RANK_DIMM_SUPPORT 1 + +//use bu init_cpus +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif + +//used by incoherent_ht +//#define K8_SCAN_PCI_BUS 1 +//#define K8_ALLOCATE_IO_RANGE 1 + #include #include #include @@ -60,9 +46,7 @@ static void post_code(uint8_t value) { } #endif -#include "northbridge/amd/amdk8/cpu_rev.c" -#define K8_HT_FREQ_1G_SUPPORT 0 -#define K8_SCAN_PCI_BUS 0 +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" @@ -85,34 +69,17 @@ static void post_code(uint8_t value) { #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} - static void hard_reset(void) { device_t dev; + unsigned sblnk = get_sblnk(); /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 3); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + dev = PCI_DEV(node_link_to_bus(0, sblnk), 2 + HT_CHAIN_END_UNITID_BASE - 1, 3); +#else + dev = PCI_DEV(node_link_to_bus(0, sblnk), 4 + HT_CHAIN_UNITID_BASE - 1, 3); +#endif set_bios_reset(); @@ -121,13 +88,17 @@ static void hard_reset(void) /* reset */ outb(0x0e, 0x0cf9); } - static void soft_reset(void) { device_t dev; + unsigned sblnk = get_sblnk(); /* Find the device */ - dev = PCI_DEV(node_link_to_bus(0, 0), 0x04, 0); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + dev = PCI_DEV(node_link_to_bus(0, sblnk), 2 + HT_CHAIN_END_UNITID_BASE - 1, 0); +#else + dev = PCI_DEV(node_link_to_bus(0, sblnk), 4 + HT_CHAIN_UNITID_BASE - 1, 0); +#endif set_bios_reset(); pci_write_config8(dev, 0x47, 1); @@ -187,32 +158,15 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } -#define K8_4RANK_DIMM_SUPPORT 1 #include "northbridge/amd/amdk8/raminit.c" -#if 0 - #define ENABLE_APIC_EXT_ID 1 - #define APIC_ID_OFFSET 0x10 - #define LIFT_BSP_APIC_ID 0 -#else - #define ENABLE_APIC_EXT_ID 0 -#endif #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" /* tyan does not want the default */ #include "resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 #include "cpu/amd/dualcore/dualcore.c" -#else -#include "cpu/amd/model_fxx/node_id.c" -#endif - -#define FIRST_CPU 1 -#define SECOND_CPU 1 -#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) #define RC0 ((1<<0)<<8) #define RC1 ((1<<1)<<8) @@ -221,45 +175,22 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define DIMM1 0x51 #include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" #if USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" -void real_main(unsigned long bist); - -void amd64_main(unsigned long bist) +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - /* Make cerain my local apic is useable */ -// enable_lapic(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - /* Is this a cpu only reset? */ - if (cpu_init_detected(id.nodeid)) { -#else -// nodeid = lapicid(); - nodeid = get_node_id(); - /* Is this a cpu only reset? */ - if (cpu_init_detected(nodeid)) { -#endif - if (last_boot_normal()) { - goto normal_image; - } else { - goto cpu_reset; - } - } + unsigned last_boot_normal_x = last_boot_normal(); - /* Is this a secondary cpu? */ -// post_code(0x21); - if (!boot_cpu()) { - if (last_boot_normal()) { + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { goto normal_image; } else { goto fallback_image; @@ -271,12 +202,12 @@ void amd64_main(unsigned long bist) enumerate_ht_chain(); - /* Setup the ck804 */ + /* Setup the flash access */ amd8111_enable_rom(); /* Is this a deliberate reset by the bios */ // post_code(0x22); - if (bios_reset_detected() && last_boot_normal()) { + if (bios_reset_detected() && last_boot_normal_x) { goto normal_image; } /* This is the primary cpu how should I boot? */ @@ -290,129 +221,47 @@ void amd64_main(unsigned long bist) // post_code(0x23); __asm__ volatile ("jmp __normal_image" : /* outputs */ - : "a" (bist) /* inputs */ - ); - cpu_reset: -// post_code(0x24); -#if 0 - //CPU reset will reset memtroller ??? - asm volatile ("jmp __cpu_reset" - : /* outputs */ - : "a"(bist) /* inputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ ); -#endif fallback_image: // post_code(0x25); - real_main(bist); + ; } -void real_main(unsigned long bist) -#else -void amd64_main(unsigned long bist) -#endif -{ - static const struct mem_controller cpu[] = { -#if FIRST_CPU - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { RC0|DIMM0, 0, 0, 0 }, - .channel1 = { RC0|DIMM1, 0, 0, 0 }, - }, #endif -#if SECOND_CPU - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { RC1|DIMM0, 0 , 0, 0 }, - .channel1 = { RC1|DIMM1, 0 , 0, 0 }, - - }, -#endif - - }; - int needs_reset; - unsigned cpu_reset = 0; +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - if (bist == 0) { -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - /* Skip this if there was a built in self test failure */ -// amd_early_mtrr_init(); # don't need, already done in cache_as_ram +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); - id = get_node_core_id_x(); // that is initid - #if ENABLE_APIC_EXT_ID == 1 - if(id.coreid == 0) { - enable_apic_ext_id(id.nodeid); - } - #endif -#else - nodeid = get_node_id(); - #if ENABLE_APIC_EXT_ID == 1 - enable_apic_ext_id(nodeid); - #endif +#if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); #endif + real_main(bist, cpu_init_detectedx); - enable_lapic(); - init_timer(); - -// post_code(0x30); +} -#if CONFIG_LOGICAL_CPUS==1 - #if (ENABLE_APIC_EXT_ID == 1) - #if LIFT_BSP_APIC_ID == 0 - if( id.nodeid != 0 ) //all except cores in node0 - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); - #endif - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { -// __asm__ volatile ("jmp __cpu_reset"); - cpu_reset = 1; - goto cpu_reset_x; - } - distinguish_cpu_resets(id.nodeid); -// start_other_core(id.nodeid); - } -#else - #if (ENABLE_APIC_EXT_ID == 1) - #if LIFT_BSP_APIC_ID == 0 - if(nodeid != 0) - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 - - #endif - if (cpu_init_detected(nodeid)) { -// __asm__ volatile ("jmp __cpu_reset"); - cpu_reset = 1; - goto cpu_reset_x; - } - distinguish_cpu_resets(nodeid); +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr [] = { + RC0|DIMM0, 0, 0, 0, + RC0|DIMM1, 0, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + RC1|DIMM0, 0 , 0, 0, + RC1|DIMM1, 0 , 0, 0, #endif + }; -// post_code(0x31); + int needs_reset; + unsigned cpu_reset = 0; + unsigned bsp_apicid = 0; - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - // We need stop the CACHE as RAM for this CPU too - #include "cpu/amd/car/cache_as_ram_post.c" - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + struct mem_controller ctrl[8]; + unsigned nodes; + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx); } // post_code(0x32); @@ -426,6 +275,8 @@ void amd64_main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist); + print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); + setup_serengeti_leopard_resource_map(); #if 0 dump_pci_device(PCI_DEV(0, 0x18, 0)); @@ -436,22 +287,24 @@ void amd64_main(unsigned long bist) #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched + wait_all_core0_started(); start_other_cores(); #endif -#if 0 + wait_all_aps_started(bsp_apicid); - // You need to preset bus num in PCI_DEV(0, 0x18,1) 0xe0, 0xe4, 0xe8, 0xec - needs_reset |= ht_setup_chains(2); -#else - // automatically set that for you, but you might meet tight space needs_reset |= ht_setup_chains_x(); -#endif if (needs_reset) { print_info("ht reset -\r\n"); soft_reset(); } + allow_all_aps_stop(bsp_apicid); + + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); + enable_smbus(); #if 0 dump_spd_registers(&cpu[0]); @@ -461,119 +314,19 @@ void amd64_main(unsigned long bist) #endif memreset_setup(); - sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); -#if 0 - print_pci_devices(); -#endif +// init_timer(); // Need to use TMICT to synconize FID/VID -#if 0 - dump_pci_devices(); -#endif + sdram_initialize(nodes, ctrl); - /* Check all of memory */ -#if 0 - msr_t msr; - msr = rdmsr(TOP_MEM2); - print_debug("TOP_MEM2: "); - print_debug_hex32(msr.hi); - print_debug_hex32(msr.lo); - print_debug("\r\n"); -#endif #if 0 - ram_check(0x00000000, msr.lo+(msr.hi<<32)); + print_pci_devices(); #endif #if 0 - // Check 16MB of memory @ 0 - ram_check(0x00000000, 0x00100000); - // Check 16MB of memory @ 2GB - ram_check(0x80000000, 0x80100000); -#endif - -#if 1 - { - /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */ - unsigned v_esp; - __asm__ volatile ( - "movl %%esp, %0\n\t" - : "=a" (v_esp) - ); -#if CONFIG_USE_INIT - printk_debug("v_esp=%08x\r\n", v_esp); -#else - print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); -#endif - } -#endif - -#if 1 - - -cpu_reset_x: - -#if CONFIG_USE_INIT - printk_debug("cpu_reset = %08x\r\n",cpu_reset); -#else - print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); -#endif - - if(cpu_reset == 0) { - print_debug("Clearing initial memory region: "); - } - print_debug("No cache as ram now - "); - - /* store cpu_reset to ebx */ - __asm__ volatile ( - "movl %0, %%ebx\n\t" - ::"a" (cpu_reset) - ); - - if(cpu_reset==0) { -#define CLEAR_FIRST_1M_RAM 1 -#include "cpu/amd/car/cache_as_ram_post.c" - } - else { -#undef CLEAR_FIRST_1M_RAM -#include "cpu/amd/car/cache_as_ram_post.c" - } - - __asm__ volatile ( - /* set new esp */ /* before _RAMBASE */ - "subl %0, %%ebp\n\t" - "subl %0, %%esp\n\t" - ::"a"( (DCACHE_RAM_BASE + DCACHE_RAM_SIZE)- _RAMBASE ) - ); - - { - unsigned new_cpu_reset; - - /* get back cpu_reset from ebx */ - __asm__ volatile ( - "movl %%ebx, %0\n\t" - :"=a" (new_cpu_reset) - ); - - print_debug("Use Ram as Stack now - "); /* but We can not go back any more, we lost old stack data in cache as ram*/ - if(new_cpu_reset==0) { - print_debug("done\r\n"); - } else - { - print_debug("\r\n"); - } - -#if CONFIG_USE_INIT - printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); -#else - print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); -#endif - /*copy and execute linuxbios_ram */ - copy_and_run(new_cpu_reset); - /* We will not return */ - } + dump_pci_devices(); #endif - - print_debug("should not be here -\r\n"); + post_cache_as_ram(cpu_reset); } diff --git a/src/mainboard/amd/serengeti_leopard/dsdt.c b/src/mainboard/amd/serengeti_leopard/dsdt.c index 01c179104d..3204428a73 100644 --- a/src/mainboard/amd/serengeti_leopard/dsdt.c +++ b/src/mainboard/amd/serengeti_leopard/dsdt.c @@ -1,42 +1,3 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= -/* - * Compilation of "dsdt_lb.dsl" - Sat Sep 17 23:29:24 2005 - * - */ unsigned char AmlCode[] = { 0x44,0x53,0x44,0x54,0xD7,0x18,0x00,0x00, /* 00000000 "DSDT...." */ diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl index a45560519b..a26d2b4226 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/amd8111.asl @@ -1,38 +1,6 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= +/* + * Copyright 2005 AMD + */ //AMD8111 Name (APIC, Package (0x04) { diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl index 2b33d7f785..b68230607e 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/amd8111_isa.asl @@ -1,38 +1,6 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= +/* + * Copyright 2005 AMD + */ //AMD8111 isa Device (ISA) diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl index 57584b2fe5..295b6508a1 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/amd8111_pic.asl @@ -1,38 +1,6 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= +/* + * Copyright 2005 AMD + */ //AMD8111 pic LNKA B C D Device (LNKA) diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl index 6a98c8f136..62fa88d6fa 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/amd8131.asl @@ -1,39 +1,6 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= -//8131 +/* + * Copyright 2005 AMD + */ Device (PG0A) { diff --git a/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl b/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl index b94c36ffd6..381bfa0375 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/amd8151.asl @@ -1,39 +1,3 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - // AMD8151 Device (AGPB) { diff --git a/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl b/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl index aeba06675e..82c55c4c3d 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/amdk8_util.asl @@ -1,39 +1,6 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - +/* + * Copyright 2005 AMD + */ //AMD k8 util for BUSB and res range diff --git a/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl b/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl index de39a365c8..2f20a26929 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl +++ b/src/mainboard/amd/serengeti_leopard/dx/dsdt_lb.dsl @@ -1,38 +1,6 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= +/* + * Copyright 2005 AMD + */ DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-K8", "AMDACPI", 100925440) { Scope (_PR) diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl b/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl index 8730387424..b1e9562f6b 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/pci1_hc.asl @@ -1,38 +1,2 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - Include ("amd8111.asl") //real SB at first Include ("amd8131.asl") diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci2.asl b/src/mainboard/amd/serengeti_leopard/dx/pci2.asl index c1be5d0d4c..59999c94b3 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/pci2.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/pci2.asl @@ -1,38 +1,6 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= +/* + * Copyright 2005 AMD + */ DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440) { Scope (_SB) diff --git a/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl b/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl index d282e71b85..045d090392 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/pci2_hc.asl @@ -1,37 +1 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - Include ("amd8151.asl") diff --git a/src/mainboard/amd/serengeti_leopard/dx/superio.asl b/src/mainboard/amd/serengeti_leopard/dx/superio.asl index ab23dc85e3..86a10a94ae 100644 --- a/src/mainboard/amd/serengeti_leopard/dx/superio.asl +++ b/src/mainboard/amd/serengeti_leopard/dx/superio.asl @@ -1,37 +1 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - // Include ("w83627hf.asl") diff --git a/src/mainboard/amd/serengeti_leopard/fadt.c b/src/mainboard/amd/serengeti_leopard/fadt.c index 1ab52c19b5..3442082467 100644 --- a/src/mainboard/amd/serengeti_leopard/fadt.c +++ b/src/mainboard/amd/serengeti_leopard/fadt.c @@ -2,42 +2,6 @@ * ACPI - create the Fixed ACPI Description Tables (FADT) * (C) Copyright 2005 Stefan Reinauer */ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - #include #include diff --git a/src/mainboard/amd/serengeti_leopard/failover.c b/src/mainboard/amd/serengeti_leopard/failover.c index a1ea247c63..345d3f4d1a 100644 --- a/src/mainboard/amd/serengeti_leopard/failover.c +++ b/src/mainboard/amd/serengeti_leopard/failover.c @@ -1,39 +1,3 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - #define ASSEMBLY 1 #include #include diff --git a/src/mainboard/amd/serengeti_leopard/get_bus_conf.c b/src/mainboard/amd/serengeti_leopard/get_bus_conf.c index 651f64c095..dc7f96618b 100644 --- a/src/mainboard/amd/serengeti_leopard/get_bus_conf.c +++ b/src/mainboard/amd/serengeti_leopard/get_bus_conf.c @@ -1,39 +1,3 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - #include #include #include @@ -77,7 +41,11 @@ unsigned sbdn; static unsigned get_sbdn(void) { device_t dev; - unsigned sbdn = 3;// 8111 unit id base is 3 if 8131 before it +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + unsigned sbdn = 1 + HT_CHAIN_END_UNITID_BASE -1; +#else + unsigned sbdn = 3 + HT_CHAIN_UNITID_BASE - 1; // 8111 unit id base is 3 if 8131 before it +#endif dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_PCI , 0); //FIXME: if 8111 PCI is disabled? if(dev) { sbdn = (dev->path.u.pci.devfn >> 3) & 0x1f; @@ -115,25 +83,32 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; // printk_debug("bus_isa=%d\n",bus_isa); +#endif } else { printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); } /* 8132-1 */ - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x01,0)); + dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x01 + HT_CHAIN_UNITID_BASE - 1,0)); if (dev) { bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif } else { printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8132_0); } /* 8132-2 */ - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x02,0)); + dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x02 + HT_CHAIN_UNITID_BASE - 1,0)); if (dev) { bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); } @@ -146,7 +121,12 @@ void get_bus_conf(void) // bus_8151_0 = node_link_to_bus( (pci1234[1]>>4) & 0xf, (pci1234[1]>>8) & 0xf); bus_8151_0 = (pci1234[1] >> 16) & 0xff; /* 8151 */ - dev = dev_find_slot(bus_8151_0, PCI_DEVFN(0x02,0)); +#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + dev = dev_find_slot(bus_8151_0, PCI_DEVFN(0x02, 0)); // FIXME : still use 1 for one device ? or do that for SB chain? +#else + dev = dev_find_slot(bus_8151_0, PCI_DEVFN(0x02 + HT_CHAIN_UNITID_BASE - 1,0)); // FIXME : still use 1 for one device ? or do that for SB chain? +#endif + if (dev) { bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); // printk_debug("bus_8151_1=%d\n",bus_8151_1); diff --git a/src/mainboard/amd/serengeti_leopard/irq_tables.c b/src/mainboard/amd/serengeti_leopard/irq_tables.c index 7eb6c53867..d176d7775b 100644 --- a/src/mainboard/amd/serengeti_leopard/irq_tables.c +++ b/src/mainboard/amd/serengeti_leopard/irq_tables.c @@ -1,39 +1,9 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ #include #include #include @@ -120,7 +90,11 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->version = PIRQ_VERSION; pirq->rtr_bus = bus_8111_0; - pirq->rtr_devfn = (4<<3)|0; +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + pirq->rtr_devfn = ((2+HT_CHAIN_END_UNITID_BASE-1)<<3)|0; +#else + pirq->rtr_devfn = ((4+HT_CHAIN_UNITID_BASE-1)<<3)|0; +#endif pirq->exclusive_irqs = 0; @@ -136,13 +110,21 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge - write_pirq_info(pirq_info, bus_8111_0, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + write_pirq_info(pirq_info, bus_8111_0, ((2+HT_CHAIN_END_UNITID_BASE-1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +#else + write_pirq_info(pirq_info, bus_8111_0, ((4+HT_CHAIN_UNITID_BASE-1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +#endif pirq_info++; slot_num++; //pcix bridge // write_pirq_info(pirq_info, bus_8132_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); // pirq_info++; slot_num++; //agp bridge - write_pirq_info(pirq_info, bus_8151_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +#if SB_HT_CHAIN_UNITID_OFFSET_ONLY == 1 + write_pirq_info(pirq_info, bus_8151_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); // FIXE: Only do that on SB chain? +#else + write_pirq_info(pirq_info, bus_8151_0, ((1+HT_CHAIN_UNITID_BASE-1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); // FIXE: Only do that on SB chain +#endif pirq_info++; slot_num++; pirq->size = 32 + 16 * slot_num; diff --git a/src/mainboard/amd/serengeti_leopard/mainboard.c b/src/mainboard/amd/serengeti_leopard/mainboard.c index 9c95128799..50de2fe0e3 100644 --- a/src/mainboard/amd/serengeti_leopard/mainboard.c +++ b/src/mainboard/amd/serengeti_leopard/mainboard.c @@ -1,39 +1,3 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - #include #include #include diff --git a/src/mainboard/amd/serengeti_leopard/mptable.c b/src/mainboard/amd/serengeti_leopard/mptable.c index af0e85f3b9..cb8c3d7e98 100644 --- a/src/mainboard/amd/serengeti_leopard/mptable.c +++ b/src/mainboard/amd/serengeti_leopard/mptable.c @@ -1,39 +1,3 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - #include #include #include @@ -99,14 +63,14 @@ void *smp_write_config_table(void *v) { device_t dev; struct resource *res; - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x1,1)); + dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x1 + HT_CHAIN_UNITID_BASE - 1, 1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8132_1, 0x11, res->base); } } - dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x2,1)); + dev = dev_find_slot(bus_8132_0, PCI_DEVFN(0x2 + HT_CHAIN_UNITID_BASE - 1, 1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -131,7 +95,11 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); //??? What - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (4<<2)|3, apicid_8111, 0x13); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((2+HT_CHAIN_END_UNITID_BASE-1)<<2)|3, apicid_8111, 0x13); +#else + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((4+HT_CHAIN_UNITID_BASE-1)<<2)|3, apicid_8111, 0x13); +#endif // Onboard AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); diff --git a/src/mainboard/amd/serengeti_leopard/readme_acpi.txt b/src/mainboard/amd/serengeti_leopard/readme_acpi.txt index 5419413f1b..916a31a978 100644 --- a/src/mainboard/amd/serengeti_leopard/readme_acpi.txt +++ b/src/mainboard/amd/serengeti_leopard/readme_acpi.txt @@ -1,41 +1,3 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - - - At this time, For acpi support We got 1. support AMK K8 SRAT --- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c) 2. support MADT ---- dynamically (LinuxBIOS run-time) (src/northbridge/amd/amdk8/amdk8_acpi.c , src/mainboard/amd/serengeti_leopard/acpi_tables.c) diff --git a/src/mainboard/amd/serengeti_leopard/resourcemap.c b/src/mainboard/amd/serengeti_leopard/resourcemap.c index 467520f882..7d2a7ece28 100644 --- a/src/mainboard/amd/serengeti_leopard/resourcemap.c +++ b/src/mainboard/amd/serengeti_leopard/resourcemap.c @@ -119,7 +119,7 @@ static void setup_serengeti_leopard_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, /* Memory-Mapped I/O Base i Registers * F1:0x80 i = 0 @@ -154,7 +154,7 @@ static void setup_serengeti_leopard_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, /* PCI I/O Limit i Registers * F1:0xC4 i = 0 @@ -181,7 +181,7 @@ static void setup_serengeti_leopard_resource_map(void) * This field defines the end of PCI I/O region n * [31:25] Reserved */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, @@ -211,7 +211,7 @@ static void setup_serengeti_leopard_resource_map(void) * This field defines the start of PCI I/O region n * [31:25] Reserved */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, @@ -252,8 +252,8 @@ static void setup_serengeti_leopard_resource_map(void) * [31:24] Bus Number Limit i * This field defines the highest bus number in configuration regin i */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070013, // AMD 8151 on link0 of CPU 1 + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0 + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070013, // AMD 8151 on link0 of CPU 1 PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, }; diff --git a/src/mainboard/amd/serengeti_leopard/ssdt.c b/src/mainboard/amd/serengeti_leopard/ssdt.c index 2882194e8c..da618b7ff9 100644 --- a/src/mainboard/amd/serengeti_leopard/ssdt.c +++ b/src/mainboard/amd/serengeti_leopard/ssdt.c @@ -1,42 +1,5 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - /* * - * Compilation of "ssdt_lb_x.dsl" - Sat Sep 17 21:31:39 2005 * */ unsigned char AmlCode_ssdt[] = diff --git a/src/mainboard/amd/serengeti_leopard/ssdt2.c b/src/mainboard/amd/serengeti_leopard/ssdt2.c index 1593519ca1..eb07c860df 100644 --- a/src/mainboard/amd/serengeti_leopard/ssdt2.c +++ b/src/mainboard/amd/serengeti_leopard/ssdt2.c @@ -1,42 +1,5 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - /* * - * Compilation of "pci2.asl" - Sat Sep 17 23:31:28 2005 * */ unsigned char AmlCode_ssdt2[] = diff --git a/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl b/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl index 712c4af235..f6a993f830 100644 --- a/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl +++ b/src/mainboard/amd/serengeti_leopard/ssdt_lb_x.dsl @@ -1,39 +1,6 @@ -/*============================================================================ -Copyright 2005 ADVANCED MICRO DEVICES, INC. All Rights Reserved. -This software and any related documentation (the "Materials") are the -confidential proprietary information of AMD. Unless otherwise provided in a -software agreement specifically licensing the Materials, the Materials are -provided in confidence and may not be distributed, modified, or reproduced in -whole or in part by any means. -LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY -EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO -WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY -PARTICULAR PURPOSE, OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR -USAGE OF TRADE. IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY -DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, -BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR -INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION -OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE -LIMITATION MAY NOT APPLY TO YOU. -AMD does not assume any responsibility for any errors which may appear in the -Materials nor any responsibility to support or update the Materials. AMD -retains the right to modify the Materials at any time, without notice, and is -not obligated to provide such modified Materials to you. -NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any -further information, software, technical information, know-how, or show-how -available to you. -U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with "RESTRICTED -RIGHTS." Use, duplication, or disclosure by the Government is subject to the -restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., or -its successor. Use of the Materials by the Government constitutes -acknowledgement of AMD's proprietary rights in them. -============================================================================*/ -// 2005.9 serengeti support -// by yhlu -// -//= - +/* + * Copyright 2005 AMD + */ DefinitionBlock ("SSDT.aml", "SSDT", 1, "AMD-K8", "AMD-ACPI", 100925440) { /* diff --git a/src/mainboard/amd/solo/Options.lb b/src/mainboard/amd/solo/Options.lb index 87a2ceb4bc..18dc596a0c 100644 --- a/src/mainboard/amd/solo/Options.lb +++ b/src/mainboard/amd/solo/Options.lb @@ -60,7 +60,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c index a9d2404f69..64f3e91737 100644 --- a/src/mainboard/amd/solo/auto.c +++ b/src/mainboard/amd/solo/auto.c @@ -11,7 +11,6 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" @@ -19,11 +18,10 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -91,6 +89,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "cpu/amd/dualcore/dualcore.c" #include "sdram/generic_sdram.c" #include "northbridge/amd/amdk8/resourcemap.c" diff --git a/src/mainboard/amd/solo/cmos.layout b/src/mainboard/amd/solo/cmos.layout index 247715e6ac..c1f3d75316 100644 --- a/src/mainboard/amd/solo/cmos.layout +++ b/src/mainboard/amd/solo/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -41,6 +42,7 @@ entries 432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi +445 1 e 1 iommu 728 256 h 0 user_data 984 16 h 0 check_sum # Reserve the extended AMD configuration registers diff --git a/src/mainboard/arima/hdama/Options.lb b/src/mainboard/arima/hdama/Options.lb index 4b567cfeb7..43bee1ef5d 100644 --- a/src/mainboard/arima/hdama/Options.lb +++ b/src/mainboard/arima/hdama/Options.lb @@ -70,7 +70,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c index c493e02cc0..f01a824cbf 100644 --- a/src/mainboard/arima/hdama/auto.c +++ b/src/mainboard/arima/hdama/auto.c @@ -11,7 +11,7 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" @@ -29,24 +29,6 @@ /* Look up a which bus a given node/link combination is on. * return 0 when we can't find the answer. */ -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} static void hard_reset(void) { diff --git a/src/mainboard/ibm/e325/Options.lb b/src/mainboard/ibm/e325/Options.lb index a1b21fd68a..64d043cae9 100644 --- a/src/mainboard/ibm/e325/Options.lb +++ b/src/mainboard/ibm/e325/Options.lb @@ -59,7 +59,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot diff --git a/src/mainboard/ibm/e325/auto.c b/src/mainboard/ibm/e325/auto.c index 13a1cae52b..ff3d9ac45d 100644 --- a/src/mainboard/ibm/e325/auto.c +++ b/src/mainboard/ibm/e325/auto.c @@ -21,7 +21,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/NSC/pc87366/pc87366_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/ibm/e325/cmos.layout b/src/mainboard/ibm/e325/cmos.layout index 247715e6ac..0daae9221d 100644 --- a/src/mainboard/ibm/e325/cmos.layout +++ b/src/mainboard/ibm/e325/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -41,6 +42,7 @@ entries 432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi +445 1 e 1 iommu 728 256 h 0 user_data 984 16 h 0 check_sum # Reserve the extended AMD configuration registers @@ -76,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb index 8a3cbf4511..896dcb18e9 100644 --- a/src/mainboard/ibm/e326/Options.lb +++ b/src/mainboard/ibm/e326/Options.lb @@ -61,7 +61,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot diff --git a/src/mainboard/ibm/e326/auto.c b/src/mainboard/ibm/e326/auto.c index e3513d6141..203a4571fe 100644 --- a/src/mainboard/ibm/e326/auto.c +++ b/src/mainboard/ibm/e326/auto.c @@ -21,7 +21,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/NSC/pc87366/pc87366_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/ibm/e326/cmos.layout b/src/mainboard/ibm/e326/cmos.layout index 247715e6ac..0daae9221d 100644 --- a/src/mainboard/ibm/e326/cmos.layout +++ b/src/mainboard/ibm/e326/cmos.layout @@ -32,6 +32,7 @@ entries 395 1 e 1 hw_scrubber 396 1 e 1 interleave_chip_selects 397 2 e 8 max_mem_clock +399 1 e 2 dual_core 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first @@ -41,6 +42,7 @@ entries 432 8 h 0 boot_countdown 440 4 e 9 slow_cpu 444 1 e 1 nmi +445 1 e 1 iommu 728 256 h 0 user_data 984 16 h 0 check_sum # Reserve the extended AMD configuration registers @@ -76,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz +8 0 400Mhz +8 1 333Mhz +8 2 266Mhz +8 3 200Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/newisys/khepri/Options.lb b/src/mainboard/newisys/khepri/Options.lb index 37733ac803..90abf22839 100644 --- a/src/mainboard/newisys/khepri/Options.lb +++ b/src/mainboard/newisys/khepri/Options.lb @@ -58,7 +58,7 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c index 61f5aba00d..5f4687c76e 100644 --- a/src/mainboard/newisys/khepri/auto.c +++ b/src/mainboard/newisys/khepri/auto.c @@ -19,7 +19,7 @@ #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index 646293e20e..d6db7c1c74 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -52,7 +52,7 @@ uses OBJCOPY uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses K8_E0_MEM_HOLE_SIZEK +uses K8_HW_MEM_HOLE_SIZEK uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -71,7 +71,9 @@ default ROM_SIZE=524288 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +#default FALLBACK_SIZE=131072 +#256K +default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot @@ -120,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1 default CONFIG_CHIP_NAME=1 #1G memory hole -default K8_E0_MEM_HOLE_SIZEK=0x100000 +default K8_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 diff --git a/src/mainboard/tyan/s2850/auto.c b/src/mainboard/tyan/s2850/auto.c index 0b9012aca8..e0d85dbd56 100644 --- a/src/mainboard/tyan/s2850/auto.c +++ b/src/mainboard/tyan/s2850/auto.c @@ -19,7 +19,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2850/cache_as_ram_auto.c b/src/mainboard/tyan/s2850/cache_as_ram_auto.c index b7a39047f2..38aba17835 100644 --- a/src/mainboard/tyan/s2850/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2850/cache_as_ram_auto.c @@ -13,7 +13,18 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" @@ -134,9 +145,11 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) enumerate_ht_chain(); + /* Setup the ck804 */ amd8111_enable_rom(); /* Is this a deliberate reset by the bios */ +// post_code(0x22); if (bios_reset_detected() && last_boot_normal_x) { goto normal_image; } @@ -148,12 +161,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) goto fallback_image; } normal_image: +// post_code(0x23); __asm__ volatile ("jmp __normal_image" : /* outputs */ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ ); fallback_image: +// post_code(0x25); ; } #endif @@ -191,6 +206,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) init_cpus(cpu_init_detectedx); } +// post_code(0x32); w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); @@ -200,10 +216,6 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) report_bist_failure(bist); setup_default_resource_map(); -#if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); - dump_pci_device(PCI_DEV(0, 0x19, 0)); -#endif needs_reset = setup_coherent_ht_domain(); @@ -211,7 +223,6 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // It is said that we should start core1 after all core0 launched start_other_cores(); #endif - // automatically set that for you, but you might meet tight space needs_reset |= ht_setup_chains_x(); if (needs_reset) { diff --git a/src/mainboard/tyan/s2875/auto.c b/src/mainboard/tyan/s2875/auto.c index d26e5a5f63..3f23f5a237 100644 --- a/src/mainboard/tyan/s2875/auto.c +++ b/src/mainboard/tyan/s2875/auto.c @@ -20,7 +20,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2875/cache_as_ram_auto.c b/src/mainboard/tyan/s2875/cache_as_ram_auto.c index 0870272cdb..43ccb2702e 100644 --- a/src/mainboard/tyan/s2875/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2875/cache_as_ram_auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index e614e04e5c..9d7e015b32 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -208,11 +208,11 @@ chip northbridge/amd/amdk8/root_complex device pci 9.0 on end #broadcom device pci 9.1 on end end - chip drivers/lsi/53c1030 - device pci a.0 on end - device pci a.1 on end - register "fw_address" = "0xfff8c000" - end +# chip drivers/lsi/53c1030 +# device pci a.0 on end +# device pci a.1 on end +# register "fw_address" = "0xfff8c000" +# end end device pci 0.1 on end device pci 1.0 on end diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c index b8ce483fc0..623a345c02 100644 --- a/src/mainboard/tyan/s2880/auto.c +++ b/src/mainboard/tyan/s2880/auto.c @@ -20,7 +20,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2880/cache_as_ram_auto.c b/src/mainboard/tyan/s2880/cache_as_ram_auto.c index 3ada300474..3808e83bbf 100644 --- a/src/mainboard/tyan/s2880/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2880/cache_as_ram_auto.c @@ -14,7 +14,7 @@ #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c index eb1e382ee3..87d5748514 100644 --- a/src/mainboard/tyan/s2881/auto.c +++ b/src/mainboard/tyan/s2881/auto.c @@ -20,7 +20,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2881/cache_as_ram_auto.c b/src/mainboard/tyan/s2881/cache_as_ram_auto.c index 6b3d131a49..77dd978856 100644 --- a/src/mainboard/tyan/s2881/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2881/cache_as_ram_auto.c @@ -19,7 +19,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c index 7edb666b9c..700e17650f 100644 --- a/src/mainboard/tyan/s2882/auto.c +++ b/src/mainboard/tyan/s2882/auto.c @@ -20,7 +20,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2882/cache_as_ram_auto.c b/src/mainboard/tyan/s2882/cache_as_ram_auto.c index aa862ece4f..967f068d51 100644 --- a/src/mainboard/tyan/s2882/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2882/cache_as_ram_auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c index add22b4e03..879b438993 100644 --- a/src/mainboard/tyan/s2882/irq_tables.c +++ b/src/mainboard/tyan/s2882/irq_tables.c @@ -1,48 +1,303 @@ -#include +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include #include +#include +#include +#include -#define IRQ_ROUTER_BUS 1 -#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) -#define IRQ_ROUTER_VENDOR 0x1022 -#define IRQ_ROUTER_DEVICE 0x746b +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*15, /* there can be total 15 devices on the bus */ + 1, /* Where the interrupt router lies (bus) */ + (4<<3)|3, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x746b, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0xff, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structu +re (including checksum) */ + { + {1,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x4,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, + {0x4,(6<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x3,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, + {0x3,(1<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, + {0x2,(3<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, + {0x2,(2<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, + {0x4,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, + {0x4,(5<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x4,(8<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,(6<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x2,(5<<3)|0, {{0x3, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}}, 0, 0}, + {0x2,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, + {0x3,(4<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, + {0x3,(5<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0}, + } +}; -#define AVAILABLE_IRQS 0xdef8 -#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ - { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ - {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + device_t dev; + unsigned reg; -/* Each IRQ_SLOT entry consists of: - * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu - */ + dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + if (!dev) { + return 0; + } + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + uint32_t config_map; + unsigned dst_node; + unsigned dst_link; + unsigned bus_base; + config_map = pci_read_config32(dev, reg); + if ((config_map & 3) != 3) { + continue; + } + dst_node = (config_map >> 4) & 7; + dst_link = (config_map >> 8) & 3; + bus_base = (config_map >> 16) & 0xff; +#if 0 + printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + dst_node, dst_link, bus_base, + reg, config_map); +#endif + if ((dst_node == node) && (dst_link == link)) + { + return bus_base; + } + } + return 0; +} + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */ - IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ - IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ - 0x00, /* IRQs devoted exclusively to PCI usage */ - IRQ_ROUTER_VENDOR, /* Vendor */ - IRQ_ROUTER_DEVICE, /* Device */ - 0x00, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xb0, /* u8 checksum , mod 256 checksum must give zero */ - { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ - /* PCI Slot 1-6 */ - IRQ_SLOT(1, 3,1,0, 2,3,4,1 ), - IRQ_SLOT(2, 3,2,0, 3,4,1,2 ), - IRQ_SLOT(3, 2,1,0, 2,3,4,1 ), - IRQ_SLOT(4, 2,2,0, 3,4,1,2 ), - IRQ_SLOT(5, 4,5,0, 2,3,4,1 ), - IRQ_SLOT(6, 4,4,0, 1,2,3,4 ), - /* Onboard NICs */ - IRQ_SLOT(0, 2,3,0, 4,0,0,0 ), - IRQ_SLOT(0, 2,4,0, 4,0,0,0 ), - /* Let Linux know about bus 1 */ - IRQ_SLOT(0, 1,4,3, 0,0,0,0 ), - } -}; unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + unsigned char bus_chain_0; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + unsigned char bus_8111_1; + { + device_t dev; + + /* HT chain 0 */ + bus_chain_0 = node_link_to_bus(0, 0); + if (bus_chain_0 == 0) { + printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + bus_chain_0 = 1; + } + + /* 8111 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + + bus_8111_1 = 4; + } + /* 8131-1 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + + bus_8131_1 = 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } + else { + printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + + bus_8131_2 = 3; + } + } + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...\n", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_chain_0; + pirq->rtr_devfn = (4<<3)|3; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1022; + pirq->rtr_device = 0x746b; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; + + { + device_t dev; + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,3)); + if (dev) { + /* initialize PCI interupts - these assignments depend + on the PCB routing of PINTA-D + + PINTA = IRQ5 + PINTB = IRQ9 + PINTC = IRQ11 + PINTD = IRQ10 + */ + pci_write_config16(dev, 0x56, 0xab95); + } + } + + printk_debug("setting Onboard AMD Southbridge \n"); + static const unsigned char slotIrqs_1_4[4] = { 5, 9, 11, 10 }; + pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4); + write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard AMD USB \n"); + static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 }; + pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0); + write_pirq_info(pirq_info, bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard ATI Display Adapter\n"); + static const unsigned char slotIrqs_8111_1_6[4] = { 11, 0, 0, 0 }; + pci_assign_irqs(bus_8111_1, 6, slotIrqs_8111_1_6); + write_pirq_info(pirq_info, bus_8111_1,(6<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 1\n"); + static const unsigned char slotIrqs_8131_2_3[4] = { 5, 9, 11, 10 }; + pci_assign_irqs(bus_8131_2, 3, slotIrqs_8131_2_3); + write_pirq_info(pirq_info, bus_8131_2,(3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 2\n"); + static const unsigned char slotIrqs_8131_2_1[4] = { 9, 11, 10, 5 }; + pci_assign_irqs(bus_8131_2, 1, slotIrqs_8131_2_1); + write_pirq_info(pirq_info, bus_8131_2,(1<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 3\n"); + static const unsigned char slotIrqs_8131_1_3[4] = { 10, 5, 9, 11 }; + pci_assign_irqs(bus_8131_1, 3, slotIrqs_8131_1_3); + write_pirq_info(pirq_info, bus_8131_1,(3<<3)|0, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x3, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 4\n"); + static const unsigned char slotIrqs_8131_1_2[4] = { 11, 10, 5, 9 }; + pci_assign_irqs(bus_8131_1, 2, slotIrqs_8131_1_2); + write_pirq_info(pirq_info, bus_8131_1,(2<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x4, 0); + pirq_info++; slot_num++; + + printk_debug("setting Slot 5 \n"); + static const unsigned char slotIrqs_8111_1_4[4] = { 5, 9, 11, 10 }; + pci_assign_irqs(bus_8111_1, 4, slotIrqs_8111_1_4); + write_pirq_info(pirq_info, bus_8111_1,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x5, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard SI Serail ATA\n"); + static const unsigned char slotIrqs_8111_1_5[4] = { 10, 0, 0, 0 }; + pci_assign_irqs(bus_8111_1, 5, slotIrqs_8111_1_5); + write_pirq_info(pirq_info, bus_8111_1,(5<<3)|0, 0x4, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard Intel NIC\n"); + static const unsigned char slotIrqs_8111_1_8[4] = { 11, 0, 0, 0 }; + pci_assign_irqs(bus_8111_1, 8, slotIrqs_8111_1_8); + write_pirq_info(pirq_info, bus_8111_1,(8<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + + printk_debug("setting Onboard Adaptec SCSI\n"); + static const unsigned char slotIrqs_8131_1_6[4] = { 5, 9, 0, 0 }; + pci_assign_irqs(bus_8131_1, 6, slotIrqs_8131_1_6); + write_pirq_info(pirq_info, bus_8131_1,(6<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +#if 0 + //?? + write_pirq_info(pirq_info, bus_8131_1,(5<<3)|0, 0x3, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0); + pirq_info++; slot_num++; +#endif + + printk_debug("setting Onboard Broadcom NIC\n"); + static const unsigned char slotIrqs_8131_1_9[4] = { 5, 9, 0, 0 }; + pci_assign_irqs(bus_8131_1, 9, slotIrqs_8131_1_9); + write_pirq_info(pirq_info, bus_8131_1,(9<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +#if 0 + //?? what's this? + write_pirq_info(pirq_info, bus_8131_2,(4<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x6, 0); + pirq_info++; slot_num++; +#endif + +#if 0 + //?? what's this? + write_pirq_info(pirq_info, bus_8131_2,(5<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x7, 0); + pirq_info++; slot_num++; +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + } diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c index f4f30737ab..1e52e4e774 100644 --- a/src/mainboard/tyan/s2885/auto.c +++ b/src/mainboard/tyan/s2885/auto.c @@ -19,7 +19,7 @@ #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c index a6df15baaf..7b2ccfaa14 100644 --- a/src/mainboard/tyan/s2885/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c index be81f89e11..e772a1ab62 100644 --- a/src/mainboard/tyan/s2891/auto.c +++ b/src/mainboard/tyan/s2891/auto.c @@ -12,7 +12,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #define K8_HT_FREQ_1G_SUPPORT 0 #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" diff --git a/src/mainboard/tyan/s2891/cache_as_ram_auto.c b/src/mainboard/tyan/s2891/cache_as_ram_auto.c index 67e63982e4..61edc58cd2 100644 --- a/src/mainboard/tyan/s2891/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2891/cache_as_ram_auto.c @@ -21,7 +21,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s2891/irq_tables.c b/src/mainboard/tyan/s2891/irq_tables.c index 0d880a23f6..d0657461ab 100644 --- a/src/mainboard/tyan/s2891/irq_tables.c +++ b/src/mainboard/tyan/s2891/irq_tables.c @@ -4,7 +4,10 @@ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ - +#include +#include +#include +#include #include const struct irq_routing_table intel_irq_routing_table = { @@ -19,15 +22,15 @@ const struct irq_routing_table intel_irq_routing_table = { 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ #if CK804_DEVN_BASE==0 - 0x5a, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + 0x31, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ #else - 0x4a, + 0x19, #endif { {1,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x5,(1<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x5,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x0, 0}, - {0x5,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, + {0x4,(1<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, + {0x7,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x0, 0}, + {0x8,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, {0x5,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, {0x4,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, {0x4,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, @@ -37,7 +40,295 @@ const struct irq_routing_table intel_irq_routing_table = { {0x6,(0x0c<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, } }; + +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + device_t dev; + unsigned reg; + + dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + if (!dev) { + return 0; + } + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + uint32_t config_map; + unsigned dst_node; + unsigned dst_link; + unsigned bus_base; + config_map = pci_read_config32(dev, reg); + if ((config_map & 3) != 3) { + continue; + } + dst_node = (config_map >> 4) & 7; + dst_link = (config_map >> 8) & 3; + bus_base = (config_map >> 16) & 0xff; +#if 0 + printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + dst_node, dst_link, bus_base, + reg, config_map); +#endif + if ((dst_node == node) && (dst_link == link)) + { + return bus_base; + } + } + return 0; +} + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + unsigned char bus_ck804_0; //1 + unsigned char bus_ck804_1; //2 + unsigned char bus_ck804_2; //3 + unsigned char bus_ck804_3; //4 + unsigned char bus_ck804_4; //5 + unsigned char bus_ck804_5; //6 + unsigned char bus_8131_0; //7 + unsigned char bus_8131_1; //8 + unsigned char bus_8131_2; //9 + + { + device_t dev; + + + bus_ck804_0 = node_link_to_bus(0, 0); + if (bus_ck804_0 == 0) { + printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + bus_ck804_0 = 1; + } + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if 0 + bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_2++; +#else + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; +#endif + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x09); + + bus_ck804_1 = 2; +#if 0 + bus_ck804_2 = 3; +#else + bus_ck804_4 = 3; +#endif + + } +#if 0 + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0)); + if (dev) { + bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_3++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0b); + + bus_ck804_3 = bus_ck804_2+1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0)); + if (dev) { + bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0c); + + bus_ck804_4 = bus_ck804_3+1; + } +#endif + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0d); + + bus_ck804_5 = bus_ck804_4+1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_0++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0e); + + bus_8131_0 = bus_ck804_5+1; + } + + bus_8131_0 = node_link_to_bus(0, 2); + + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } + else { + printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + + bus_8131_1 = bus_8131_0+1; + bus_8131_2 = bus_8131_0+2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + + bus_8131_2 = bus_8131_1+1; + } + + + } + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_ck804_0; + pirq->rtr_devfn = ((CK804_DEVN_BASE+9)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x005c; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//pcix bridge + write_pirq_info(pirq_info, bus_8131_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + +#if 0 +//smbus + write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//usb + write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//audio + write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot1 PCIE x16 + write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); + pirq_info++; slot_num++; + +//firewire + write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot2 pci + write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804b_0, ((CK804_DEVN_BASE+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//Slot3 PCIE x16 + write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); + pirq_info++; slot_num++; + +//Slot4 PCIX + write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); + pirq_info++; slot_num++; + +//Slot5 PCIX + write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); + pirq_info++; slot_num++; + +//onboard scsi + write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot6 PCIX + write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); + pirq_info++; slot_num++; +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + } diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c index 1d19ecfafc..07d7b5ec8b 100644 --- a/src/mainboard/tyan/s2892/auto.c +++ b/src/mainboard/tyan/s2892/auto.c @@ -12,7 +12,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #define K8_HT_FREQ_1G_SUPPORT 1 #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c index 27d87ecceb..3bb7fb3d83 100644 --- a/src/mainboard/tyan/s2892/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c index 8c11f30fa7..5bfc6bf680 100644 --- a/src/mainboard/tyan/s2895/auto.c +++ b/src/mainboard/tyan/s2895/auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include //#define K8_HT_FREQ_1G_SUPPORT 1 #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" @@ -23,7 +23,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "cpu/amd/model_fxx/model_fxx_msr.h" +#include #include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c index b63095039a..0a97666ae2 100644 --- a/src/mainboard/tyan/s2895/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c @@ -25,7 +25,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index ed3b5c1a17..74c5542f87 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -208,11 +208,11 @@ chip northbridge/amd/amdk8/root_complex chip southbridge/amd/amd8131 # the on/off keyword is mandatory device pci 0.0 on - chip drivers/lsi/53c1030 - device pci 4.0 on end - device pci 4.1 on end - register "fw_address" = "0xfff8c000" - end +# chip drivers/lsi/53c1030 +# device pci 4.0 on end +# device pci 4.1 on end +# register "fw_address" = "0xfff8c000" +# end chip drivers/pci/onboard device pci 9.0 on end device pci 9.1 on end diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c index bcabf22eef..7598e14199 100644 --- a/src/mainboard/tyan/s4880/auto.c +++ b/src/mainboard/tyan/s4880/auto.c @@ -20,7 +20,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s4880/cache_as_ram_auto.c b/src/mainboard/tyan/s4880/cache_as_ram_auto.c index 7245d578ea..0165a1f8c2 100644 --- a/src/mainboard/tyan/s4880/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s4880/cache_as_ram_auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s4882/auto.c b/src/mainboard/tyan/s4882/auto.c index ba58af9d63..4617cba9f5 100644 --- a/src/mainboard/tyan/s4882/auto.c +++ b/src/mainboard/tyan/s4882/auto.c @@ -19,7 +19,7 @@ #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s4882/cache_as_ram_auto.c b/src/mainboard/tyan/s4882/cache_as_ram_auto.c index 237d9c94f1..6f1ac8d098 100644 --- a/src/mainboard/tyan/s4882/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s4882/cache_as_ram_auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include "northbridge/amd/amdk8/cpu_rev.c" +#include #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c index c16603a926..cf7c59d993 100644 --- a/src/mainboard/tyan/s4882/mptable.c +++ b/src/mainboard/tyan/s4882/mptable.c @@ -7,6 +7,41 @@ #include #endif + +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + device_t dev; + unsigned reg; + + dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); + if (!dev) { + return 0; + } + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + uint32_t config_map; + unsigned dst_node; + unsigned dst_link; + unsigned bus_base; + config_map = pci_read_config32(dev, reg); + if ((config_map & 3) != 3) { + continue; + } + dst_node = (config_map >> 4) & 7; + dst_link = (config_map >> 8) & 3; + bus_base = (config_map >> 16) & 0xff; +#if 0 + printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + dst_node, dst_link, bus_base, + reg, config_map); +#endif + if ((dst_node == node) && (dst_link == link)) + { + return bus_base; + } + } + return 0; +} + void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; @@ -16,6 +51,7 @@ void *smp_write_config_table(void *v) unsigned char bus_num; unsigned char bus_isa; + unsigned char bus_chain_0; unsigned char bus_8131_1; unsigned char bus_8131_2; unsigned char bus_8111_1; @@ -46,9 +82,16 @@ void *smp_write_config_table(void *v) { device_t dev; - + + /* HT chain 0 */ + bus_chain_0 = node_link_to_bus(0, 1); + if (bus_chain_0 == 0) { + printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + bus_chain_0 = 1; + } + /* 8111 */ - dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); @@ -61,7 +104,7 @@ void *smp_write_config_table(void *v) bus_isa = 5; } /* 8131-1 */ - dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); if (dev) { bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); @@ -72,7 +115,7 @@ void *smp_write_config_table(void *v) bus_8131_1 = 2; } /* 8131-2 */ - dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); if (dev) { bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); @@ -105,14 +148,14 @@ void *smp_write_config_table(void *v) { device_t dev; struct resource *res; - dev = dev_find_slot(1, PCI_DEVFN(0x1,1)); + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x1,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } } - dev = dev_find_slot(1, PCI_DEVFN(0x2,1)); + dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x2,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -141,7 +184,7 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 1, (4<<2)|0, apicid_8111, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); //On Board AMD USB -- cgit v1.2.3