From 3511023f341b4416ea61558bd5ecfa2ea8416782 Mon Sep 17 00:00:00 2001 From: Kein Yuan Date: Sat, 22 Feb 2014 12:26:55 -0800 Subject: baytrail/rambi: S3 support and other updates baytrail: Change all GPIO related pull resistors from 10K to 20K Reviewed-on: https://chromium-review.googlesource.com/187570 (cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e) baytrail: workaround kernel using serial console on resume Reviewed-on: https://chromium-review.googlesource.com/188011 (cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469) baytrail: allow dirty cache line evictions for SMRAM to stick Reviewed-on: https://chromium-review.googlesource.com/188015 (cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca) baytrail: Optionally pull up TDO and TMS to avoid power loss in S3. Reviewed-on: https://chromium-review.googlesource.com/188260 (cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6) rambi: always load option rom Reviewed-on: https://chromium-review.googlesource.com/188721 (cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9) baytrail: use new chromeos ram oops API Reviewed-on: https://chromium-review.googlesource.com/186394 (cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594) rambi: always show dev/rec screens on eDP connected panel Reviewed-on: https://chromium-review.googlesource.com/188731 (cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95) baytrail: stop e820 reserving default SMM region Reviewed-on: https://chromium-review.googlesource.com/189084 (cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24) baytrai: update MRC wrapper header Reviewed-on: https://chromium-review.googlesource.com/189196 (cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970) rambi: Put LPE device into ACPI mode Reviewed-on: https://chromium-review.googlesource.com/189371 (cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413) baytrail: DPTF: Enable mainboard-specific PPCC Reviewed-on: https://chromium-review.googlesource.com/189576 (cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612) baytrail: Add config option for PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189994 (cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5) rambi: Enable PCIe wake Reviewed-on: https://chromium-review.googlesource.com/189995 (cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6) Squashed 13 commits for baytrail/rambi. Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4 Signed-off-by: Isaac Christensen Reviewed-on: http://review.coreboot.org/6957 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones --- src/mainboard/google/rambi/Kconfig | 1 + src/mainboard/google/rambi/acpi/dptf.asl | 21 ++++++++++++++ src/mainboard/google/rambi/devicetree.cb | 6 +++- src/mainboard/google/rambi/mainboard.c | 8 ++--- src/soc/intel/baytrail/Kconfig | 1 + src/soc/intel/baytrail/acpi/dptf/cpu.asl | 23 +++------------ src/soc/intel/baytrail/acpi/southcluster.asl | 4 --- src/soc/intel/baytrail/baytrail/gpio.h | 42 ++++++++++++++++++--------- src/soc/intel/baytrail/baytrail/iosf.h | 8 +++++ src/soc/intel/baytrail/baytrail/mrc_wrapper.h | 17 +++++++++-- src/soc/intel/baytrail/baytrail/ramstage.h | 3 +- src/soc/intel/baytrail/baytrail/smm.h | 8 ++++- src/soc/intel/baytrail/chip.c | 2 +- src/soc/intel/baytrail/chip.h | 10 +++++-- src/soc/intel/baytrail/cpu.c | 15 ++++++++++ src/soc/intel/baytrail/gpio.c | 12 ++++++-- src/soc/intel/baytrail/northcluster.c | 18 ++++-------- src/soc/intel/baytrail/pcie.c | 6 ++++ src/soc/intel/baytrail/ramstage.c | 8 ++--- src/soc/intel/baytrail/smm.c | 17 ++++++----- src/soc/intel/baytrail/southcluster.c | 41 ++++++++++++++++++++++++++ 21 files changed, 194 insertions(+), 77 deletions(-) diff --git a/src/mainboard/google/rambi/Kconfig b/src/mainboard/google/rambi/Kconfig index f784aedae7..e3f5befeb2 100644 --- a/src/mainboard/google/rambi/Kconfig +++ b/src/mainboard/google/rambi/Kconfig @@ -12,6 +12,7 @@ config BOARD_SPECIFIC_OPTIONS select HAVE_OPTION_TABLE select HAVE_ACPI_RESUME select MAINBOARD_HAS_CHROMEOS + select ALWAYS_LOAD_OPROM config VBOOT_RAMSTAGE_INDEX hex diff --git a/src/mainboard/google/rambi/acpi/dptf.asl b/src/mainboard/google/rambi/acpi/dptf.asl index 975c9396f1..507b7c686f 100644 --- a/src/mainboard/google/rambi/acpi/dptf.asl +++ b/src/mainboard/google/rambi/acpi/dptf.asl @@ -49,5 +49,26 @@ Name (DTRT, Package () { Package () { \_SB.DPTF.TCPU, \_SB.DPTF.TSR2, 100, 600, 0, 0, 0, 0 }, }) +Name (MPPC, Package () +{ + 0x2, // Revision + Package () { // Power Limit 1 + 0, // PowerLimitIndex, 0 for Power Limit 1 + 1600, // PowerLimitMinimum + 6200, // PowerLimitMaximum + 1000, // TimeWindowMinimum + 1000, // TimeWindowMaximum + 200 // StepSize + }, + Package () { // Power Limit 2 + 1, // PowerLimitIndex, 1 for Power Limit 2 + 8000, // PowerLimitMinimum + 8000, // PowerLimitMaximum + 1000, // TimeWindowMinimum + 1000, // TimeWindowMaximum + 1000 // StepSize + } +}) + /* Include Baytrail DPTF */ #include diff --git a/src/mainboard/google/rambi/devicetree.cb b/src/mainboard/google/rambi/devicetree.cb index 95b2b3a398..5d9eec535e 100644 --- a/src/mainboard/google/rambi/devicetree.cb +++ b/src/mainboard/google/rambi/devicetree.cb @@ -32,8 +32,12 @@ chip soc/intel/baytrail register "sdcard_cap_high" = "0x0" # Enable devices in ACPI mode - register "scc_acpi_mode" = "1" + register "lpe_acpi_mode" = "1" register "lpss_acpi_mode" = "1" + register "scc_acpi_mode" = "1" + + # Allow PCIe devices to wake system from suspend + register "pcie_wake_enable" = "1" # Enable PIPEA as DP_C register "gpu_pipea_hotplug" = "6" # 6ms Pulse diff --git a/src/mainboard/google/rambi/mainboard.c b/src/mainboard/google/rambi/mainboard.c index f8c80aef9d..19579fb0b7 100644 --- a/src/mainboard/google/rambi/mainboard.c +++ b/src/mainboard/google/rambi/mainboard.c @@ -67,15 +67,15 @@ static int int15_handler(void) * Boot Display Device Hook: * bit 0 = CRT * bit 1 = TV (eDP) * - * bit 2 = EFP * + * bit 2 = EFP * bit 3 = LFP * bit 4 = CRT2 - * bit 5 = TV2 (eDP) * - * bit 6 = EFP2 * + * bit 5 = TV2 (eDP) + * bit 6 = EFP2 * bit 7 = LFP2 */ X86_AX = 0x005f; - X86_CX = 0x0006; + X86_CX = 0x0002; res = 1; break; case 0x5f51: diff --git a/src/soc/intel/baytrail/Kconfig b/src/soc/intel/baytrail/Kconfig index eee7d1122b..aa55444e02 100644 --- a/src/soc/intel/baytrail/Kconfig +++ b/src/soc/intel/baytrail/Kconfig @@ -10,6 +10,7 @@ config CPU_SPECIFIC_OPTIONS select ARCH_BOOTBLOCK_X86_32 select ARCH_ROMSTAGE_X86_32 select ARCH_RAMSTAGE_X86_32 + select BACKUP_DEFAULT_SMM_REGION select CACHE_MRC_SETTINGS select CAR_MIGRATION select COLLECT_TIMESTAMPS diff --git a/src/soc/intel/baytrail/acpi/dptf/cpu.asl b/src/soc/intel/baytrail/acpi/dptf/cpu.asl index 89f9b8b02a..87f1d1926a 100644 --- a/src/soc/intel/baytrail/acpi/dptf/cpu.asl +++ b/src/soc/intel/baytrail/acpi/dptf/cpu.asl @@ -127,26 +127,11 @@ Device (TCPU) } } - Name (PPCC, Package () + /* Return PPCC table defined by mainboard */ + Method (PPCC) { - 0x2, // Revision - Package () { // Power Limit 1 - 0, // PowerLimitIndex, 0 for Power Limit 1 - 1600, // PowerLimitMinimum - 6200, // PowerLimitMaximum - 1000, // TimeWindowMinimum - 1000, // TimeWindowMaximum - 200 // StepSize - }, - Package () { // Power Limit 2 - 1, // PowerLimitIndex, 1 for Power Limit 2 - 8000, // PowerLimitMinimum - 8000, // PowerLimitMaximum - 1000, // TimeWindowMinimum - 1000, // TimeWindowMaximum - 1000 // StepSize - } - }) + Return (\_SB.MPPC) + } #ifdef DPTF_CPU_CRITICAL Method (_CRT) diff --git a/src/soc/intel/baytrail/acpi/southcluster.asl b/src/soc/intel/baytrail/acpi/southcluster.asl index fac252f6fb..5382182659 100644 --- a/src/soc/intel/baytrail/acpi/southcluster.asl +++ b/src/soc/intel/baytrail/acpi/southcluster.asl @@ -198,10 +198,6 @@ Device (PDRC) Memory32Fixed(ReadWrite, MPHY_BASE_ADDRESS, MPHY_BASE_SIZE) Memory32Fixed(ReadWrite, PUNIT_BASE_ADDRESS, PUNIT_BASE_SIZE) Memory32Fixed(ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE) -#if CONFIG_CHROMEOS_RAMOOPS - Memory32Fixed(ReadWrite, CONFIG_CHROMEOS_RAMOOPS_RAM_START, - CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE) -#endif }) // Current Resource Settings diff --git a/src/soc/intel/baytrail/baytrail/gpio.h b/src/soc/intel/baytrail/baytrail/gpio.h index a5ba6a3d24..a43132420c 100644 --- a/src/soc/intel/baytrail/baytrail/gpio.h +++ b/src/soc/intel/baytrail/baytrail/gpio.h @@ -163,6 +163,13 @@ .use_sel = GPIO_USE_MMIO, \ .is_gpio = 1 } +#define GPIO_INPUT_PU_20K \ + { .pad_conf0 = PAD_PU_20K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT, \ + .pad_conf1 = PAD_CONFIG1_DEFAULT, \ + .pad_val = PAD_VAL_INPUT, \ + .use_sel = GPIO_USE_MMIO, \ + .is_gpio = 1 } + #define GPIO_INPUT_PD_10K \ { .pad_conf0 = PAD_PU_10K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ @@ -170,15 +177,22 @@ .use_sel = GPIO_USE_MMIO, \ .is_gpio = 1 } +#define GPIO_INPUT_PD_20K \ + { .pad_conf0 = PAD_PU_20K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \ + .pad_conf1 = PAD_CONFIG1_DEFAULT, \ + .pad_val = PAD_VAL_INPUT, \ + .use_sel = GPIO_USE_MMIO, \ + .is_gpio = 1 } + #define GPIO_INPUT_NOPU \ - { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ + { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, \ .use_sel = GPIO_USE_MMIO, \ .is_gpio = 1 } #define GPIO_INPUT_LEGACY_NOPU \ - { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ + { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, \ .use_sel = GPIO_USE_LEGACY, \ @@ -187,7 +201,7 @@ /* Direct / dedicated IRQ input - pass signal directly to apic */ #define GPIO_DIRQ \ - { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ + { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \ | PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_LEVEL_IRQ, \ .pad_conf1 = PAD_CONFIG1_DEFAULT, \ .pad_val = PAD_VAL_INPUT, } @@ -220,13 +234,13 @@ .pad_val = PAD_VAL_DEFAULT } /* Default functional configs -- no PU */ -#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 10K) -#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 10K) -#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 10K) -#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 10K) -#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 10K) -#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 10K) -#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 10K) +#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 20K) +#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 20K) +#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 20K) +#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 20K) +#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 20K) +#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 20K) +#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 20K) /* ACPI GPIO routing. Assume everything is externally pulled and negative edge * triggered. SCI implies WAKE, but WAKE doesn't imply SCI. */ @@ -265,9 +279,9 @@ /* Common default GPIO settings */ #define GPIO_INPUT GPIO_INPUT_NOPU #define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU -#define GPIO_INPUT_PU GPIO_INPUT_PU_10K -#define GPIO_INPUT_PD GPIO_INPUT_PD_10K -#define GPIO_NC GPIO_INPUT_PU_10K +#define GPIO_INPUT_PU GPIO_INPUT_PU_20K +#define GPIO_INPUT_PD GPIO_INPUT_PD_20K +#define GPIO_NC GPIO_INPUT_PU_20K #define GPIO_DEFAULT GPIO_FUNC0 /* 16 DirectIRQs per supported bank */ @@ -320,7 +334,7 @@ struct gpio_bank { const u8 gpio_f1_range_end; }; -void setup_soc_gpios(struct soc_gpio_config *config); +void setup_soc_gpios(struct soc_gpio_config *config, u8 enable_xdp_tap); /* This function is weak and can be overridden by a mainboard function. */ struct soc_gpio_config* mainboard_get_gpios(void); diff --git a/src/soc/intel/baytrail/baytrail/iosf.h b/src/soc/intel/baytrail/baytrail/iosf.h index f61582cee3..9da86f5bb1 100644 --- a/src/soc/intel/baytrail/baytrail/iosf.h +++ b/src/soc/intel/baytrail/baytrail/iosf.h @@ -197,10 +197,18 @@ void iosf_ssus_write(int reg, uint32_t val); #define BUNIT_BMBOUND_HI 0x26 #define BUNIT_MMCONF_REG 0x27 /* The SMMRR registers define the SMM region in MiB granularity. */ +#define BUNIT_SMRCP 0x2b +#define BUNIT_SMRRAC 0x2c +#define BUNIT_SMRWAC 0x2d #define BUNIT_SMRRL 0x2e #define BUNIT_SMRRH 0x2f # define BUNIT_SMRR_ENABLE (1 << 31) +/* SA ID bits. */ +#define SAI_IA_UNTRUSTED (1 << 0) +#define SAI_IA_SMM (1 << 2) +#define SAI_IA_BOOT (1 << 4) + /* * DUNIT Registers. */ diff --git a/src/soc/intel/baytrail/baytrail/mrc_wrapper.h b/src/soc/intel/baytrail/baytrail/mrc_wrapper.h index fc18f0c823..b5009e4b2d 100644 --- a/src/soc/intel/baytrail/baytrail/mrc_wrapper.h +++ b/src/soc/intel/baytrail/baytrail/mrc_wrapper.h @@ -28,7 +28,7 @@ #ifndef _MRC_WRAPPER_H_ #define _MRC_WRAPPER_H_ -#define MRC_PARAMS_VER 4 +#define MRC_PARAMS_VER 5 #define NUM_CHANNELS 2 @@ -55,12 +55,25 @@ enum mrc_wrapper_error { PLATFORM_SETTINGS_FAIL = -4, DIMM_DETECTION_FAILURE = -5, MEMORY_CONFIG_FAILURE = -6, + INVALID_CPU_ODT_SETTING = -7, + INVALID_DRAM_ODT_SETTING = -8, }; struct mrc_mainboard_params { int dram_type; int dram_info_location; /* DRAM_INFO_* */ - int weaker_odt_settings; /* Apply weaker on-die-termination settings. */ + int dram_is_slotted; /* mobo has DRAM slots. */ + /* + * The below ODT settings are only honored when !dram_is_slotted. + * Aditionally, weaker_odt_settings being non-zero causes + * cpu_odt_value to not be honored as weaker_odt_settings have a + * special training path. + */ + int weaker_odt_settings; + /* Allowed settings: 60, 80, 100, 120, and 150. */ + int cpu_odt_value; + /* Allowed settings: 60 and 120. */ + int dram_odt_value; int spd_addrs[NUM_CHANNELS]; void *dram_data[NUM_CHANNELS]; /* SPD or Timing specific data. */ } __attribute__((packed)); diff --git a/src/soc/intel/baytrail/baytrail/ramstage.h b/src/soc/intel/baytrail/baytrail/ramstage.h index d2e7e62fbb..a8b5fdcc61 100644 --- a/src/soc/intel/baytrail/baytrail/ramstage.h +++ b/src/soc/intel/baytrail/baytrail/ramstage.h @@ -21,10 +21,11 @@ #define _BAYTRAIL_RAMSTAGE_H_ #include +#include /* The baytrail_init_pre_device() function is called prior to device * initialization, but it's after console and cbmem has been reinitialized. */ -void baytrail_init_pre_device(void); +void baytrail_init_pre_device(struct soc_intel_baytrail_config *config); void baytrail_init_cpus(device_t dev); void set_max_freq(void); void southcluster_enable_dev(device_t dev); diff --git a/src/soc/intel/baytrail/baytrail/smm.h b/src/soc/intel/baytrail/baytrail/smm.h index e00944d520..f147f7336e 100644 --- a/src/soc/intel/baytrail/baytrail/smm.h +++ b/src/soc/intel/baytrail/baytrail/smm.h @@ -37,7 +37,13 @@ void *smm_region_start(void); #include void southcluster_smm_clear_state(void); void southcluster_smm_enable_smi(void); -void southcluster_smm_save_gpio_route(uint32_t route); +void southcluster_smm_save_param(int param, uint32_t data); #endif +enum { + SMM_SAVE_PARAM_GPIO_ROUTE = 0, + SMM_SAVE_PARAM_PCIE_WAKE_ENABLE, + SMM_SAVE_PARAM_COUNT +}; + #endif /* _BAYTRAIL_SMM_H_ */ diff --git a/src/soc/intel/baytrail/chip.c b/src/soc/intel/baytrail/chip.c index eedae397b0..ce9eb4941a 100644 --- a/src/soc/intel/baytrail/chip.c +++ b/src/soc/intel/baytrail/chip.c @@ -70,7 +70,7 @@ static void enable_dev(device_t dev) /* Called at BS_DEV_INIT_CHIPS time -- very early. Just after BS_PRE_DEVICE. */ static void soc_init(void *chip_info) { - baytrail_init_pre_device(); + baytrail_init_pre_device(chip_info); } struct chip_operations soc_intel_baytrail_ops = { diff --git a/src/soc/intel/baytrail/chip.h b/src/soc/intel/baytrail/chip.h index 0a57885b92..256ed4f2fa 100644 --- a/src/soc/intel/baytrail/chip.h +++ b/src/soc/intel/baytrail/chip.h @@ -26,9 +26,10 @@ #include struct soc_intel_baytrail_config { - uint8_t sata_port_map; - uint8_t sata_ahci; - uint8_t ide_legacy_combined; + uint8_t enable_xdp_tap; + uint8_t sata_port_map; + uint8_t sata_ahci; + uint8_t ide_legacy_combined; uint8_t clkreq_enable; /* VR low power settings -- enable PS2 mode for gfx and core */ @@ -68,6 +69,9 @@ struct soc_intel_baytrail_config { int scc_acpi_mode; int lpe_acpi_mode; + /* Allow PCIe devices to wake system from suspend. */ + int pcie_wake_enable; + /* * Digital Port Hotplug Enable: * 0x04 = Enabled, 2ms short pulse diff --git a/src/soc/intel/baytrail/cpu.c b/src/soc/intel/baytrail/cpu.c index 1bbcb087dd..97d1f04b97 100644 --- a/src/soc/intel/baytrail/cpu.c +++ b/src/soc/intel/baytrail/cpu.c @@ -30,6 +30,7 @@ #include #include +#include #include #include #include @@ -103,6 +104,8 @@ void baytrail_init_cpus(device_t dev) struct bus *cpu_bus = dev->link_list; const struct pattrs *pattrs = pattrs_get(); struct mp_params mp_params; + uint32_t bsmrwac; + void *default_smm_area; /* Set up MTRRs based on physical address size. */ x86_setup_fixed_mtrrs(); @@ -116,6 +119,16 @@ void baytrail_init_cpus(device_t dev) mp_params.num_records = ARRAY_SIZE(mp_steps); mp_params.microcode_pointer = pattrs->microcode_patch; + default_smm_area = backup_default_smm_area(); + + /* + * Configure the BUNIT to allow dirty cache line evictions in non-SMM + * mode for the lines that were dirtied while in SMM mode. Otherwise + * the writes would be silently dropped. + */ + bsmrwac = iosf_bunit_read(BUNIT_SMRWAC) | SAI_IA_UNTRUSTED; + iosf_bunit_write(BUNIT_SMRWAC, bsmrwac); + /* Set package MSRs */ reg_script_run(package_msr_script); @@ -125,6 +138,8 @@ void baytrail_init_cpus(device_t dev) if (mp_init(cpu_bus, &mp_params)) { printk(BIOS_ERR, "MP initialization failure.\n"); } + + restore_default_smm_area(default_smm_area); } static void baytrail_core_init(device_t cpu) diff --git a/src/soc/intel/baytrail/gpio.c b/src/soc/intel/baytrail/gpio.c index 78aeb17570..43e52ef9a0 100644 --- a/src/soc/intel/baytrail/gpio.c +++ b/src/soc/intel/baytrail/gpio.c @@ -192,7 +192,7 @@ static void setup_gpio_route(const struct soc_gpio_map *sus, route_reg |= ROUTE_SCI << (2 * (i + 8)); } } - southcluster_smm_save_gpio_route(route_reg); + southcluster_smm_save_param(SMM_SAVE_PARAM_GPIO_ROUTE, route_reg); } static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS], @@ -214,7 +214,7 @@ static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS], } } -void setup_soc_gpios(struct soc_gpio_config *config) +void setup_soc_gpios(struct soc_gpio_config *config, u8 enable_xdp_tap) { if (config) { setup_gpios(config->ncore, &gpncore_bank); @@ -228,6 +228,14 @@ void setup_soc_gpios(struct soc_gpio_config *config) setup_dirqs(*config->sus_dirq, &gpssus_bank); } + /* Set on die termination feature with pull up value and + * drive the pad high for TAP_TDO and TAP_TMS + */ + if (!enable_xdp_tap) { + printk(BIOS_DEBUG, "Tri-state TDO and TMS\n"); + write32(GPSSUS_PAD_BASE + 0x2fc, 0xc); + write32(GPSSUS_PAD_BASE + 0x2cc, 0xc); + } } struct soc_gpio_config* __attribute__((weak)) mainboard_get_gpios(void) diff --git a/src/soc/intel/baytrail/northcluster.c b/src/soc/intel/baytrail/northcluster.c index e90c0303ab..b119e243fe 100644 --- a/src/soc/intel/baytrail/northcluster.c +++ b/src/soc/intel/baytrail/northcluster.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -88,14 +89,8 @@ static void nc_read_resources(device_t dev) mmconf = iosf_bunit_read(BUNIT_MMCONF_REG) & ~((1 << 28) - 1); mmio_resource(dev, BUNIT_MMCONF_REG, RES_IN_KiB(mmconf), 256 * 1024); - /* 0 -> SMM_DEFAULT_BASE cacheable ram. */ - ram_resource(dev, index++, 0, RES_IN_KiB(SMM_DEFAULT_BASE)); - /* Default SMM region is cacheable but reserved for coreboot */ - reserved_ram_resource(dev, index++, RES_IN_KiB(SMM_DEFAULT_BASE), - RES_IN_KiB(SMM_DEFAULT_SIZE)); - - /* SMM_DEFAULT_BASE + SMM_DEFAULT_SIZE - > 0xa0000 */ - base_k = RES_IN_KiB(SMM_DEFAULT_BASE + SMM_DEFAULT_SIZE); + /* 0 -> 0xa0000 */ + base_k = RES_IN_KiB(0); size_k = RES_IN_KiB(0xa0000) - base_k; ram_resource(dev, index++, base_k, size_k); @@ -132,11 +127,8 @@ static void nc_read_resources(device_t dev) mmio_resource(dev, index++, (0xa0000 >> 10), (0xc0000 - 0xa0000) >> 10); reserved_ram_resource(dev, index++, (0xc0000 >> 10), (0x100000 - 0xc0000) >> 10); -#if CONFIG_CHROMEOS_RAMOOPS - reserved_ram_resource(dev, index++, - CONFIG_CHROMEOS_RAMOOPS_RAM_START >> 10, - CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE >> 10); -#endif + + chromeos_reserve_ram_oops(dev, index++); } static struct device_operations nc_ops = { diff --git a/src/soc/intel/baytrail/pcie.c b/src/soc/intel/baytrail/pcie.c index ce76d6d88f..4498f43a22 100644 --- a/src/soc/intel/baytrail/pcie.c +++ b/src/soc/intel/baytrail/pcie.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "chip.h" @@ -174,10 +175,15 @@ static void check_device_present(device_t dev) static void byt_pcie_enable(device_t dev) { if (is_first_port(dev)) { + struct soc_intel_baytrail_config *config = dev->chip_info; uint32_t reg = pci_read_config32(dev, PHYCTL2_IOSFBCTL); pll_en_off = !!(reg & PLL_OFF_EN); strpfusecfg = pci_read_config32(dev, STRPFUSECFG); + + if (config && config->pcie_wake_enable) + southcluster_smm_save_param( + SMM_SAVE_PARAM_PCIE_WAKE_ENABLE, 1); } /* Check if device is enabled in strapping. */ diff --git a/src/soc/intel/baytrail/ramstage.c b/src/soc/intel/baytrail/ramstage.c index e8f441f3c1..96229307aa 100644 --- a/src/soc/intel/baytrail/ramstage.c +++ b/src/soc/intel/baytrail/ramstage.c @@ -184,9 +184,9 @@ static void s3_resume_prepare(void) s3_save_acpi_wake_source(gnvs); } -void baytrail_init_pre_device(void) +void baytrail_init_pre_device(struct soc_intel_baytrail_config *config) { - struct soc_gpio_config *config; + struct soc_gpio_config *gpio_config; fill_in_pattrs(); @@ -200,8 +200,8 @@ void baytrail_init_pre_device(void) baytrail_run_reference_code(); /* Get GPIO initial states from mainboard */ - config = mainboard_get_gpios(); - setup_soc_gpios(config); + gpio_config = mainboard_get_gpios(); + setup_soc_gpios(gpio_config, config->enable_xdp_tap); baytrail_init_scc(); } diff --git a/src/soc/intel/baytrail/smm.c b/src/soc/intel/baytrail/smm.c index d4b3d58350..daf759d206 100644 --- a/src/soc/intel/baytrail/smm.c +++ b/src/soc/intel/baytrail/smm.c @@ -31,13 +31,12 @@ #include #include -/* Save the gpio route register. The settings are committed from - * southcluster_smm_enable_smi(). */ -static uint32_t gpio_route; +/* Save settings which will be committed in SMI functions. */ +static uint32_t smm_save_params[SMM_SAVE_PARAM_COUNT]; -void southcluster_smm_save_gpio_route(uint32_t route) +void southcluster_smm_save_param(int param, uint32_t data) { - gpio_route = route; + smm_save_params[param] = data; } void southcluster_smm_clear_state(void) @@ -70,7 +69,7 @@ static void southcluster_smm_route_gpios(void) const unsigned long gpio_rout = PMC_BASE_ADDRESS + GPIO_ROUT; const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI; uint32_t alt_gpio_reg = 0; - uint32_t route_reg = gpio_route; + uint32_t route_reg = smm_save_params[SMM_SAVE_PARAM_GPIO_ROUTE]; int i; printk(BIOS_DEBUG, "GPIO_ROUT = %08x\n", route_reg); @@ -92,10 +91,12 @@ static void southcluster_smm_route_gpios(void) void southcluster_smm_enable_smi(void) { + uint16_t pm1_events = PWRBTN_EN | GBL_EN; printk(BIOS_DEBUG, "Enabling SMIs.\n"); - /* Configure events Disable pcie wake. */ - enable_pm1(PWRBTN_EN | GBL_EN | PCIEXPWAK_DIS); + if (!smm_save_params[SMM_SAVE_PARAM_PCIE_WAKE_ENABLE]) + pm1_events |= PCIEXPWAK_DIS; + enable_pm1(pm1_events); disable_gpe(PME_B0_EN); /* Set up the GPIO route. */ diff --git a/src/soc/intel/baytrail/southcluster.c b/src/soc/intel/baytrail/southcluster.c index 49e4c91a13..261c95ae1d 100644 --- a/src/soc/intel/baytrail/southcluster.c +++ b/src/soc/intel/baytrail/southcluster.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -29,6 +30,7 @@ #include #include #include +#include #include #include @@ -144,6 +146,42 @@ static void sc_rtc_init(void) rtc_init(rtc_fail); } +/* + * The UART hardware loses power while in suspend. Because of this the kernel + * can hang because it doesn't re-initialize serial ports it is using for + * consoles at resume time. The following function configures the UART + * if the hardware is enabled though it may not be the correct baud rate + * or configuration. This is definitely a hack, but it helps the kernel + * along. + */ +static void com1_configure_resume(device_t dev) +{ + const uint16_t port = 0x3f8; + + /* Is the UART I/O port eanbled? */ + if (!(pci_read_config32(dev, UART_CONT) & 1)) + return; + + /* Disable interrupts */ + outb(0x0, port + UART8250_IER); + + /* Enable FIFOs */ + outb(UART8250_FCR_FIFO_EN, port + UART8250_FCR); + + /* assert DTR and RTS so the other end is happy */ + outb(UART8250_MCR_DTR | UART8250_MCR_RTS, port + UART8250_MCR); + + /* DLAB on */ + outb(UART8250_LCR_DLAB | 3, port + UART8250_LCR); + + /* Set Baud Rate Divisor. 1 ==> 115200 Baud */ + outb(1, port + UART8250_DLL); + outb(0, port + UART8250_DLM); + + /* Set to 3 for 8N1 */ + outb(3, port + UART8250_LCR); +} + static void sc_init(device_t dev) { int i; @@ -176,6 +214,9 @@ static void sc_init(device_t dev) write32(gen_pmcon1, read32(gen_pmcon1) & ~DIS_SLP_X_STRCH_SUS_UP); } + + if (acpi_slp_type == 3) + com1_configure_resume(dev); } /* -- cgit v1.2.3