From 2aef7f3ceceffecc36c379059335c251e8e2ff3b Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Sat, 17 Nov 2018 12:13:59 -0700 Subject: soc/intel/cannonlake: Fix IO decode setup This change makes the early IO decode setup mirror that of other Intel SOCs and fixes issues with COM1 not being enabled properly. Tested by successfully successfully receiving serial output from an 8250IO UART device at the standard 0x3f8 base address. Change-Id: I9bd894fea62b78b81e5c80b5e88a539ebddac2df Signed-off-by: Duncan Laurie Reviewed-on: https://review.coreboot.org/c/29671 Tested-by: build bot (Jenkins) Reviewed-by: Lijian Zhao --- src/soc/intel/cannonlake/bootblock/pch.c | 40 +++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 11 deletions(-) diff --git a/src/soc/intel/cannonlake/bootblock/pch.c b/src/soc/intel/cannonlake/bootblock/pch.c index 3ef084a858..b06c81bf32 100644 --- a/src/soc/intel/cannonlake/bootblock/pch.c +++ b/src/soc/intel/cannonlake/bootblock/pch.c @@ -46,6 +46,9 @@ #define PCR_PSFX_TO_SHDW_PCIEN_IOEN 0x01 #define PCR_PSFX_T0_SHDW_PCIEN 0x1C +#define PCR_DMI_DMICTL 0x2234 +#define PCR_DMI_DMICTL_SRLOCK (1 << 31) + #define PCR_DMI_ACPIBA 0x27B4 #define PCR_DMI_ACPIBDID 0x27B8 #define PCR_DMI_PMBASEA 0x27AC @@ -168,23 +171,38 @@ static void soc_config_tco(void) outw(tcocnt, tcobase + TCO1_CNT); } +static int pch_check_decode_enable(void) +{ + uint32_t dmi_control; + + /* + * This cycle decoding is only allowed to set when + * DMICTL.SRLOCK is 0. + */ + dmi_control = pcr_read32(PID_DMI, PCR_DMI_DMICTL); + if (dmi_control & PCR_DMI_DMICTL_SRLOCK) + return -1; + return 0; +} + void pch_early_iorange_init(void) { - uint16_t dec_rng, dec_en = 0; + uint16_t io_enables = LPC_IOE_SUPERIO_2E_2F | LPC_IOE_KBC_60_64 | + LPC_IOE_EC_62_66 | LPC_IOE_LGE_200; /* IO Decode Range */ - if (IS_ENABLED(CONFIG_DRIVERS_UART_8250IO) && - IS_ENABLED(CONFIG_UART_DEBUG)) { - dec_rng = COMA_RANGE | (COMB_RANGE << 4); - dec_en = COMA_LPC_EN | COMB_LPC_EN; - pci_write_config16(PCH_DEV_LPC, LPC_IO_DEC, dec_rng); - pcr_write16(PID_DMI, PCR_DMI_LPCIOD, dec_rng); - } + if (IS_ENABLED(CONFIG_DRIVERS_UART_8250IO)) + lpc_io_setup_comm_a_b(); /* IO Decode Enable */ - dec_en |= SE_LPC_EN | KBC_LPC_EN | MC1_LPC_EN | GAMEL_LPC_EN; - pci_write_config16(PCH_DEV_LPC, LPC_EN, dec_en); - pcr_write16(PID_DMI, PCR_DMI_LPCIOE, dec_en); + if (pch_check_decode_enable() == 0) { + io_enables = lpc_enable_fixed_io_ranges(io_enables); + /* + * Set up LPC IO Enables PCR[DMI] + 2774h [15:0] to the same + * value program in LPC PCI offset 82h. + */ + pcr_write16(PID_DMI, PCR_DMI_LPCIOE, io_enables); + } /* Program generic IO Decode Range */ pch_enable_lpc(); -- cgit v1.2.3