From 20ca7ebe315146cc22c9f9daf700385baaf12ae9 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Mon, 21 Dec 2020 18:59:09 +0100 Subject: mb/prodrive/hermes: Use some board settings from EEPROM Cache the board settings in memory to avoid having to read them from the EEPROM multiple times. For now, configure the following settings: - DeepSx - USB power in S5 - Power state after G3 Change-Id: Id88529a0b064c54fdf341de3856a8877109d4b14 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/48807 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph --- src/mainboard/prodrive/hermes/mainboard.c | 72 +++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/src/mainboard/prodrive/hermes/mainboard.c b/src/mainboard/prodrive/hermes/mainboard.c index b24dd566f9..f2bbbba46c 100644 --- a/src/mainboard/prodrive/hermes/mainboard.c +++ b/src/mainboard/prodrive/hermes/mainboard.c @@ -1,6 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0-only */ +#include #include +#include +#include +#include +#include "variants/baseboard/include/eeprom.h" #include "gpio.h" /* FIXME: Example code below */ @@ -65,6 +70,66 @@ static void mb_usb2_fp2_pwr_enable(bool enable) gpio_output(GPP_G4, enable); } +static void mainboard_init(void *chip_info) +{ + const struct eeprom_board_settings *const board_cfg = get_board_settings(); + + if (!board_cfg) + return; + + config_t *config = config_of_soc(); + config->deep_s5_enable_ac = board_cfg->deep_sx_enabled; + config->deep_s5_enable_dc = board_cfg->deep_sx_enabled; +} + +static void mainboard_final(struct device *dev) +{ + const struct eeprom_board_settings *const board_cfg = get_board_settings(); + + if (!board_cfg) + return; + + /* Encoding: 0 -> S0, 1 -> S5 */ + const bool on = !board_cfg->power_state_after_g3; + + pmc_soc_set_afterg3_en(on); +} + +#if CONFIG(HAVE_ACPI_TABLES) +static void mainboard_acpi_fill_ssdt(const struct device *dev) +{ + const struct eeprom_board_settings *const board_cfg = get_board_settings(); + + if (!board_cfg) + return; + + const unsigned int usb_power_gpios[] = { GPP_G0, GPP_G1, GPP_G2, GPP_G3, GPP_G4 }; + + /* Function pointer to write STXS or CTXS according to EEPROM board setting */ + int (*acpigen_write_soc_gpio_op)(unsigned int gpio_num); + + if (board_cfg->usb_powered_in_s5) + acpigen_write_soc_gpio_op = acpigen_soc_set_tx_gpio; + else + acpigen_write_soc_gpio_op = acpigen_soc_clear_tx_gpio; + + acpigen_write_scope("\\_SB"); + { + acpigen_write_method("MPTS", 1); + { + acpigen_write_if_lequal_op_int(ARG0_OP, 5); + { + for (size_t i = 0; i < ARRAY_SIZE(usb_power_gpios); i++) + acpigen_write_soc_gpio_op(usb_power_gpios[i]); + } + acpigen_pop_len(); + } + acpigen_pop_len(); + } + acpigen_pop_len(); +} +#endif + static void mainboard_enable(struct device *dev) { /* FIXME: Do runtime configuration once the board is production ready */ @@ -82,8 +147,15 @@ static void mainboard_enable(struct device *dev) mb_usb31_fp_pwr_enable(1); mb_usb2_fp1_pwr_enable(1); mb_usb2_fp2_pwr_enable(1); + + dev->ops->final = mainboard_final; + +#if CONFIG(HAVE_ACPI_TABLES) + dev->ops->acpi_fill_ssdt = mainboard_acpi_fill_ssdt; +#endif } struct chip_operations mainboard_ops = { + .init = mainboard_init, .enable_dev = mainboard_enable, }; -- cgit v1.2.3