From 1e3e528d23e645c8c542aaa568a8e6e20aa00486 Mon Sep 17 00:00:00 2001 From: Chris Wang Date: Tue, 23 Jun 2020 21:10:57 +0800 Subject: mb/google/zork: Apply USB2 default phy tune parameter for Zork family Apply the default USB2 phy tuning parameter for Zork family BUG=b:155132211 TEST=Build, verified the default value been applied on trembyle and the USB2 device works well. Signed-off-by: Chris Wang Change-Id: I1f00b04173796d70147e232bafa405487b0761e1 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2260216 Reviewed-by: Aaron Durbin Reviewed-on: https://review.coreboot.org/c/coreboot/+/42997 Reviewed-by: Aaron Durbin Tested-by: build bot (Jenkins) --- .../google/zork/variants/baseboard/devicetree.cb | 78 ++++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/src/mainboard/google/zork/variants/baseboard/devicetree.cb b/src/mainboard/google/zork/variants/baseboard/devicetree.cb index 159665f8b7..9db0d239d6 100644 --- a/src/mainboard/google/zork/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/zork/variants/baseboard/devicetree.cb @@ -60,6 +60,84 @@ chip soc/amd/picasso register "xhci0_force_gen1" = "0" + # Controller0 Port0 Default + register "usb_2_port_0_tune_params" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port1 Default + register "usb_2_port_1_tune_params" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port2 Default + register "usb_2_port_2_tune_params" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port3 Default + register "usb_2_port_3_tune_params" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller1 Port0 Default + register "usb_2_port_4_tune_params" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x02, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x5, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller1 Port1 Default + register "usb_2_port_5_tune_params" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x02, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x5, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + # SPI Configuration register "common_config.spi_config" = "{ .normal_speed = SPI_SPEED_66M, /* MHz */ -- cgit v1.2.3