From 1bd3050c27508036576c1f34ca500a6b4bccbda0 Mon Sep 17 00:00:00 2001 From: Patrick Georgi Date: Mon, 26 Jan 2015 20:17:49 +0100 Subject: libpayload: Add USB device mode driver Add a framework for USB device mode controllers and a driver for the ChipIdea controller which is part of the tegra platform. TODO: - fix USB detach/attach - implement zero length packet handling properly BUG=chrome-os-partner:35861 TEST=none BRANCH=none Change-Id: I8defeea78b5a3bdbf9c1b1222c2702eaf3256b81 Signed-off-by: Patrick Georgi Original-Commit-Id: 542332291880c4026a05a960ceb91d37891ee018 Original-Change-Id: Ib4068d201dd63ebeda80157bd3130f3059919cdd Original-Signed-off-by: Patrick Georgi Original-Reviewed-on: https://chromium-review.googlesource.com/243272 Original-Reviewed-by: Aaron Durbin Reviewed-on: http://review.coreboot.org/8756 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- payloads/libpayload/Config.in | 15 + payloads/libpayload/drivers/Makefile.inc | 4 + payloads/libpayload/drivers/udc/chipidea.c | 472 ++++++++++++++++++++++++ payloads/libpayload/drivers/udc/chipidea_priv.h | 168 +++++++++ payloads/libpayload/drivers/udc/udc.c | 327 ++++++++++++++++ payloads/libpayload/include/udc/chipidea.h | 37 ++ payloads/libpayload/include/udc/udc.h | 141 +++++++ 7 files changed, 1164 insertions(+) create mode 100644 payloads/libpayload/drivers/udc/chipidea.c create mode 100644 payloads/libpayload/drivers/udc/chipidea_priv.h create mode 100644 payloads/libpayload/drivers/udc/udc.c create mode 100644 payloads/libpayload/include/udc/chipidea.h create mode 100644 payloads/libpayload/include/udc/udc.h diff --git a/payloads/libpayload/Config.in b/payloads/libpayload/Config.in index 84f72e0089..ed6d91c1f9 100644 --- a/payloads/libpayload/Config.in +++ b/payloads/libpayload/Config.in @@ -531,6 +531,21 @@ config USB_PCI default y if ARCH_X86 default n +config UDC + bool "USB device mode support" + default n + help + Select this option to add support for running as + a USB device. + +config UDC_CI + bool "ChipIdea driver for USB device mode" + depends on UDC + default n + help + Select this option to add the driver for ChipIdea + USB device controller. + endmenu menu "Debugging" diff --git a/payloads/libpayload/drivers/Makefile.inc b/payloads/libpayload/drivers/Makefile.inc index 007395788f..b5f6c16e22 100644 --- a/payloads/libpayload/drivers/Makefile.inc +++ b/payloads/libpayload/drivers/Makefile.inc @@ -105,5 +105,9 @@ libc-$(CONFIG_LP_USB_MSC) += usb/usbmsc.c libc-$(CONFIG_LP_USB_DWC2) += usb/dwc2.c libc-$(CONFIG_LP_USB_DWC2) += usb/dwc2_rh.c +# USB device stack +libc-$(CONFIG_LP_UDC) += udc/udc.c +libc-$(CONFIG_LP_UDC_CI) += udc/chipidea.c + # used by both USB HID and keyboard libc-y += hid.c diff --git a/payloads/libpayload/drivers/udc/chipidea.c b/payloads/libpayload/drivers/udc/chipidea.c new file mode 100644 index 0000000000..e06f0d2824 --- /dev/null +++ b/payloads/libpayload/drivers/udc/chipidea.c @@ -0,0 +1,472 @@ +/* + * This file is part of the libpayload project. + * + * Copyright (C) 2015 Google Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include "chipidea_priv.h" + +#ifdef DEBUG +#define debug(x...) printf(x) +#else +#define debug(x...) do {} while (0) +#endif + +#define min(a, b) (((a) < (b)) ? (a) : (b)) + +static struct qh *get_qh(struct chipidea_pdata *p, int endpoint, int in_dir) +{ + assert(in_dir <= 1); + return &p->qhlist[2 * endpoint + in_dir]; +} + +static unsigned int ep_to_bits(int ep, int in_dir) +{ + return ep + (in_dir ? 16 : 0); +} + +static void clear_setup_ep(struct chipidea_pdata *p, int endpoint) +{ + writel(1 << endpoint, &p->opreg->epsetupstat); +} + +static void clear_ep(struct chipidea_pdata *p, int endpoint, int in_dir) +{ + writel(1 << ep_to_bits(endpoint, in_dir), &p->opreg->epcomplete); +} + +static int chipidea_hw_init(struct usbdev_ctrl *this, void *_opreg, + const device_descriptor_t *dd) +{ + struct chipidea_opreg *opreg = _opreg; + struct chipidea_pdata *p = CI_PDATA(this); + + p->opreg = phys_to_virt(opreg); + p->qhlist = dma_memalign(4096, sizeof(struct qh) * CI_QHELEMENTS); + memcpy(&this->device_descriptor, dd, sizeof(*dd)); + + if (p->qhlist == NULL) + die("failed to allocate memory for usb device mode"); + + memset(p->qhlist, 0, sizeof(struct qh) * CI_QHELEMENTS); + + SLIST_INIT(&this->configs); + + int i; + for (i = 0; i < 16; i++) { + SIMPLEQ_INIT(&p->job_queue[i][0]); + SIMPLEQ_INIT(&p->job_queue[i][1]); + } + + for (i = 0; i < CI_QHELEMENTS; i++) { + p->qhlist[i].config = QH_MPS(512) | QH_NO_AUTO_ZLT | QH_IOS; + p->qhlist[i].td.next = TD_TERMINATE; + } + /* EP0 in/out are hardwired for SETUP */ + p->qhlist[0].config = QH_MPS(64) | QH_NO_AUTO_ZLT | QH_IOS; + p->qhlist[1].config = QH_MPS(64) | QH_NO_AUTO_ZLT | QH_IOS; + + do { + debug("waiting for usb phy clk valid: %x\n", + readl(&p->opreg->susp_ctrl)); + mdelay(1); + } while ((readl(&p->opreg->susp_ctrl) & (1 << 7)) == 0); + + writel(USBCMD_8MICRO | USBCMD_RST, &p->opreg->usbcmd); + mdelay(1); + + /* enable device mode */ + writel(2, &p->opreg->usbmode); + + dcache_clean_by_mva(p->qhlist, sizeof(struct qh) * CI_QHELEMENTS); + + writel(virt_to_phys(p->qhlist), &p->opreg->epbase); + writel(0xffffffff, &p->opreg->epflush); + + /* enable EP0 */ + writel((1 << 23) | (1 << 22) | (1 << 7) | (1 << 6), + &p->opreg->epctrl[0]); + + /* clear status register */ + writel(readl(&p->opreg->usbsts), &p->opreg->usbsts); + + debug("taking controller out of reset\n"); + writel(USBCMD_8MICRO | USBCMD_RUN, &p->opreg->usbcmd); + + return 1; +} + +static void chipidea_halt_ep(struct usbdev_ctrl *this, int ep, int in_dir) +{ + struct chipidea_pdata *p = CI_PDATA(this); + writel(1 << ep_to_bits(ep, in_dir), &p->opreg->epflush); + while (readl(&p->opreg->epflush)) + ; + clrbits_le32(&p->opreg->epctrl[ep], 1 << (7 + (in_dir ? 16 : 0))); +} + +static void chipidea_start_ep(struct usbdev_ctrl *this, + int ep, int in_dir, int ep_type, int mps) +{ + struct chipidea_pdata *p = CI_PDATA(this); + struct qh *qh = get_qh(p, ep, in_dir); + qh->config = (mps << 16) | QH_NO_AUTO_ZLT | QH_IOS; + dcache_clean_by_mva(qh, sizeof(*qh)); + in_dir = in_dir ? 1 : 0; + debug("enabling %d-%d (type %d)\n", ep, in_dir, ep_type); + /* enable endpoint, reset data toggle */ + setbits_le32(&p->opreg->epctrl[ep], + ((1 << 7) | (1 << 6) | (ep_type << 2)) << (in_dir*16)); + p->ep_busy[ep][in_dir] = 0; +} + +static void advance_endpoint(struct chipidea_pdata *p, int endpoint, int in_dir) +{ + if (p->ep_busy[endpoint][in_dir]) + return; + if (SIMPLEQ_EMPTY(&p->job_queue[endpoint][in_dir])) + return; + + struct job *job = SIMPLEQ_FIRST(&p->job_queue[endpoint][in_dir]); + struct qh *qh = get_qh(p, endpoint, in_dir); + + uint32_t start = (uint32_t)(uintptr_t)job->data; + uint32_t offset = (start & 0xfff); + /* unlike with typical EHCI controllers, + * a full TD transfers either 0x5000 bytes if + * page aligned or 0x4000 bytes if not. + */ + int maxsize = 0x5000; + if (offset > 0) + maxsize = 0x4000; + uint32_t td_count = (job->length + maxsize - 1) / maxsize; + + /* special case for zero length packets */ + if (td_count == 0) + td_count = 1; + + if (job->zlp) + td_count++; + + struct td *tds = dma_memalign(32, sizeof(struct td) * td_count); + memset(tds, 0, sizeof(struct td) * td_count); + + int i; + int remaining = job->length; + for (i = 0; i < td_count; i++) { + int datacount = min(maxsize, remaining); + + debug("td %d, %d bytes\n", i, datacount); + tds[i].next = (uint32_t)virt_to_phys(&tds[i+1]); + tds[i].info = TD_INFO_LEN(datacount) | TD_INFO_ACTIVE; + tds[i].page0 = start; + tds[i].page1 = (start & 0xfffff000) + 0x1000; + tds[i].page2 = (start & 0xfffff000) + 0x2000; + tds[i].page3 = (start & 0xfffff000) + 0x3000; + tds[i].page4 = (start & 0xfffff000) + 0x4000; + remaining -= datacount; + start = start + datacount; + } + tds[td_count - 1].next = TD_TERMINATE; + tds[td_count - 1].info |= TD_INFO_IOC; + + qh->td.next = (uint32_t)virt_to_phys(tds); + qh->td.info = 0; + + job->tds = tds; + job->td_count = td_count; + + dcache_clean_by_mva(tds, sizeof(struct td) * td_count); + dcache_clean_by_mva(job->data, job->length); + dcache_clean_by_mva(qh, sizeof(*qh)); + + debug("priming EP %d-%d with %zx bytes starting at %x (%p)\n", endpoint, + in_dir, job->length, tds[0].page0, job->data); + writel(1 << ep_to_bits(endpoint, in_dir), &p->opreg->epprime); + while (readl(&p->opreg->epprime)) + ; + p->ep_busy[endpoint][in_dir] = 1; +} + +static void handle_endpoint(struct usbdev_ctrl *this, int endpoint, int in_dir) +{ + struct chipidea_pdata *p = CI_PDATA(this); + struct job *job = SIMPLEQ_FIRST(&p->job_queue[endpoint][in_dir]); + SIMPLEQ_REMOVE_HEAD(&p->job_queue[endpoint][in_dir], queue); + + if (in_dir) + dcache_invalidate_by_mva(job->data, job->length); + + int length = job->length; + + int i = 0; + do { + int active; + do { + dcache_invalidate_by_mva(&job->tds[i], + sizeof(struct td)); + active = job->tds[i].info & TD_INFO_ACTIVE; + debug("%d-%d: info %08x, page0 %x, next %x\n", + endpoint, in_dir, job->tds[i].info, + job->tds[i].page0, job->tds[i].next); + } while (active); + /* + * The controller writes back the length field in info + * with the number of bytes it did _not_ process. + * Hence, take the originally scheduled length and + * subtract whatever lengths we still find - that gives + * us the data that the controller did transfer. + */ + int remaining = job->tds[i].info >> 16; + length -= remaining; + } while (job->tds[i++].next != TD_TERMINATE); + debug("%d-%d: scheduled %zd, now %d bytes\n", endpoint, in_dir, + job->length, length); + + if (this->current_config && + this->current_config->interfaces[0].handle_packet) + this->current_config->interfaces[0].handle_packet(this, + endpoint, in_dir, job->data, length); + + free(job->tds); + if (job->autofree) + free(job->data); + free(job); + p->ep_busy[endpoint][in_dir] = 0; + + advance_endpoint(p, endpoint, in_dir); +} + +static void start_setup(struct usbdev_ctrl *this, int ep) +{ + dev_req_t dr; + struct chipidea_pdata *p = CI_PDATA(this); + struct qh *qh = get_qh(p, ep, 0); + + dcache_invalidate_by_mva(qh, sizeof(*qh)); + memcpy(&dr, qh->setup_data, sizeof(qh->setup_data)); + clear_setup_ep(p, ep); + +#ifdef DEBUG + hexdump((unsigned long)&dr, sizeof(dr)); +#endif + + udc_handle_setup(this, ep, &dr); +} + + +static void chipidea_enqueue_packet(struct usbdev_ctrl *this, int endpoint, + int in_dir, void *data, int len, int zlp, int autofree) +{ + struct chipidea_pdata *p = CI_PDATA(this); + struct job *job = malloc(sizeof(*job)); + + job->data = data; + job->length = len; + job->zlp = zlp; + job->autofree = autofree; + + debug("adding job of %d bytes to EP %d-%d\n", len, endpoint, in_dir); + SIMPLEQ_INSERT_TAIL(&p->job_queue[endpoint][in_dir], job, queue); + + if ((endpoint == 0) || (this->initialized)) + advance_endpoint(p, endpoint, in_dir); +} + +static int chipidea_poll(struct usbdev_ctrl *this) +{ + struct chipidea_pdata *p = CI_PDATA(this); + uint32_t sts = readl(&p->opreg->usbsts); + writel(sts, &p->opreg->usbsts); /* clear */ + + /* new information if the bus is high speed or not */ + if (sts & USBSTS_PCI) { + debug("USB speed negotiation: "); + if ((readl(&p->opreg->devlc) & DEVLC_HOSTSPEED_MASK) + == DEVLC_HOSTSPEED(2)) { + debug("high speed\n"); + // TODO: implement + } else { + debug("full speed\n"); + // TODO: implement + } + } + + /* reset requested. stop all activities */ + if (sts & USBSTS_URI) { + int i; + debug("USB reset requested\n"); + if (this->initialized) { + writel(readl(&p->opreg->epstat), &p->opreg->epstat); + writel(readl(&p->opreg->epsetupstat), + &p->opreg->epsetupstat); + writel(0xffffffff, &p->opreg->epflush); + for (i = 1; i < 16; i++) + writel(0, &p->opreg->epctrl[i]); + this->initialized = 0; + } + writel((1 << 22) | (1 << 6), &p->opreg->epctrl[0]); + p->qhlist[0].config = QH_MPS(64) | QH_NO_AUTO_ZLT | QH_IOS; + p->qhlist[1].config = QH_MPS(64) | QH_NO_AUTO_ZLT | QH_IOS; + dcache_clean_by_mva(p->qhlist, 2 * sizeof(struct qh)); + } + + if (sts & (USBSTS_UEI | USBSTS_UI)) { + uint32_t bitmap = readl(&p->opreg->epsetupstat); + int ep = 0; + while (bitmap) { + if (bitmap & 1) { + debug("incoming packet on EP %d (setup)\n", ep); + start_setup(this, ep); + } + bitmap >>= 1; + ep++; + } + bitmap = readl(&p->opreg->epcomplete); + ep = 0; + int dir_in = 0; + while (bitmap) { + if (bitmap & 1) { + debug("incoming packet on EP %d (%s)\n", + ep, dir_in ? "intr/in" : "out"); + handle_endpoint(this, ep & 0xf, dir_in); + clear_ep(p, ep & 0xf, dir_in); + } + bitmap >>= 1; + ep++; + if (ep == 16) + dir_in = 1; + } + } + + return 1; +} + +static void chipidea_shutdown(struct usbdev_ctrl *this) +{ + struct chipidea_pdata *p = CI_PDATA(this); + int i, j; + int is_empty = 0; + while (!is_empty) { + is_empty = 1; + this->poll(this); + for (i = 0; i < 16; i++) + for (j = 0; j < 2; j++) + if (!SIMPLEQ_EMPTY(&p->job_queue[i][j])) + is_empty = 0; + } + writel(0xffffffff, &p->opreg->epflush); + writel(USBCMD_8MICRO | USBCMD_RST, &p->opreg->usbcmd); + writel(0, &p->opreg->usbmode); + writel(USBCMD_8MICRO, &p->opreg->usbcmd); + free(p->qhlist); + free(p); + free(this); +} + +static void chipidea_set_address(struct usbdev_ctrl *this, int address) +{ + struct chipidea_pdata *p = CI_PDATA(this); + writel((address << 25) | (1 << 24), &p->opreg->usbadr); +} + +static void chipidea_stall(struct usbdev_ctrl *this, + uint8_t ep, int in_dir, int set) +{ + struct chipidea_pdata *p = CI_PDATA(this); + assert(ep < 16); + uint32_t *ctrl = &p->opreg->epctrl[ep]; + in_dir = in_dir ? 1 : 0; + if (set) { + if (in_dir) + setbits_le32(ctrl, 1 << 16); + else + setbits_le32(ctrl, 1 << 0); + } else { + /* reset STALL bit, reset data toggle */ + if (in_dir) { + setbits_le32(ctrl, 1 << 22); + clrbits_le32(ctrl, 1 << 16); + } else { + setbits_le32(ctrl, 1 << 6); + setbits_le32(ctrl, 1 << 0); + } + } + this->ep_halted[ep][in_dir] = set; +} + +static void *chipidea_malloc(size_t size) +{ + return dma_malloc(size); +} + +static void chipidea_free(void *ptr) +{ + free(ptr); +} + +struct usbdev_ctrl *chipidea_init(device_descriptor_t *dd) +{ + struct usbdev_ctrl *ctrl = calloc(1, sizeof(*ctrl)); + if (ctrl == NULL) + return NULL; + ctrl->pdata = calloc(1, sizeof(struct chipidea_pdata)); + if (ctrl->pdata == NULL) { + free(ctrl); + return NULL; + } + + ctrl->poll = chipidea_poll; + ctrl->add_gadget = udc_add_gadget; + ctrl->enqueue_packet = chipidea_enqueue_packet; + ctrl->shutdown = chipidea_shutdown; + ctrl->set_address = chipidea_set_address; + ctrl->stall = chipidea_stall; + ctrl->halt_ep = chipidea_halt_ep; + ctrl->start_ep = chipidea_start_ep; + ctrl->alloc_data = chipidea_malloc; + ctrl->free_data = chipidea_free; + ctrl->initialized = 0; + + if (!chipidea_hw_init(ctrl, (void *)0x7d000000, dd)) { + free(ctrl->pdata); + free(ctrl); + return NULL; + } + return ctrl; +} diff --git a/payloads/libpayload/drivers/udc/chipidea_priv.h b/payloads/libpayload/drivers/udc/chipidea_priv.h new file mode 100644 index 0000000000..ede97ab264 --- /dev/null +++ b/payloads/libpayload/drivers/udc/chipidea_priv.h @@ -0,0 +1,168 @@ +/* + * This file is part of the libpayload project. + * + * Copyright (C) 2015 Google Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef __CHIPIDEA_PRIV_H__ +#define __CHIPIDEA_PRIV_H__ + +#include + +struct chipidea_opreg { + uint8_t pad0[0x130]; + uint32_t usbcmd; // 0x130 + uint32_t usbsts; // 0x134 + uint32_t pad138[3]; + uint32_t usbadr; // 0x144 + /* 31:25: address + * 24: staging: 1 -> commit new address after + * next ctrl-in on ep0 + */ + uint32_t epbase; // 0x148 + uint32_t pad14c[10]; + uint32_t portsc; // 0x174 + uint32_t pad178[15]; + uint32_t devlc; // 0x1b4 + /* 25:26: host-desired usb version + * 23: force full speed */ + uint32_t pad1b8[16]; + uint32_t usbmode; // 0x1f8 + /* 0:1: 2 -> device mode */ + uint32_t pad1fc[3]; + uint32_t epsetupstat; // 0x208 + /* 0:15: 1 -> epX received setup packet */ + uint32_t epprime; // 0x20c + /* 0:15: 1 -> rx buffer for epX (OUT) is primed + * (ie. ready for controller-side processing) + * 16:31: 1 -> tx buffer for ep(X-16) (IN/INTR) is primed + * (ie. ready for controller-side processing) + * + * controller will read new td from qh and process it, + * then set the bit to 0 + */ + uint32_t epflush; // 0x210 + /* 0:31: 1 -> flush buffer (as defined in epprime), + * so it's uninitialized again. + * controller resets to 0 when done + */ + uint32_t epstat; // 0x214 + /* 0:31: 1 -> command in epprime is done, EP is ready + * (which may be later than epprime reset) + */ + uint32_t epcomplete; // 0x218 + /* 0:15: 1 -> incoming out/setup packet for epX was handled. + * software should check QH state + * 16:31: 1 -> incoming intr/in packet for ep(X-16) was + * handled. software should check QH state + */ + uint32_t epctrl[16]; // 0x21c + /* epctrl[0] is hardcoded as enabled control endpoint. + * TXS/RXS for stalling can be written. + * + * 23: TXE tx endpoint enable + * 22: TXR reset tx data toggle (for every configuration event) + * 18:19: 0=ctrl, 1=isoc, 2=bulk, 3=intr endpoint + * 16: TXS stall tx + * + * 7: RXE rx endpoint enable + * 6: RXR reset rx data toggle (for every configuration event) + * 2:3: endpoint type (like 18:19) + * 0: RXS stall rx + */ + uint32_t pad25c[0x69]; // 0x25c + uint32_t susp_ctrl; // 0x400 +}; + +#define CI_PDATA(ctrl) ((struct chipidea_pdata *)((ctrl)->pdata)) +#define CI_QHELEMENTS 32 + +#define QH_NO_AUTO_ZLT (1 << 29) /* no automatic ZLT handling by chipset */ +#define QH_MPS(x) ((x) << 16) +#define QH_IOS (1 << 15) /* IRQ on setup */ + +#define TD_INFO_LEN(x) ((x) << 16) +#define TD_INFO_IOC (1 << 15) +#define TD_INFO_ACTIVE (1 << 7) +#define TD_TERMINATE 1 + +#define USBCMD_8MICRO (8 << 16) +#define USBCMD_RST 2 +#define USBCMD_RUN 1 + +#define USBSTS_SLI (1 << 8) +#define USBSTS_URI (1 << 6) +#define USBSTS_PCI (1 << 2) +#define USBSTS_UEI (1 << 1) +#define USBSTS_UI (1 << 0) + +#define DEVLC_HOSTSPEED(x) (x << 25) +#define DEVLC_HOSTSPEED_MASK DEVLC_HOSTSPEED(3) + +struct td { + /* points to next td */ + uint32_t next; + uint32_t info; + /* page0..4 are like EHCI pages: up to 4k each + * page0 from addr to page end, page4 to its length + */ + uint32_t page0; + uint32_t page1; + uint32_t page2; + uint32_t page3; + uint32_t page4; + uint32_t res; +}; + +struct qh { + uint32_t config; + uint32_t current; + struct td td; + /* contains the data of a setup request */ + uint8_t setup_data[8]; + uint32_t res[4]; +}; + +struct job { + SIMPLEQ_ENTRY(job) queue; // linkage + struct td *tds; // for later free()ing + int td_count; + void *data; + size_t length; + int zlp; // append zero length packet? + int autofree; // free after processing? +}; + +SIMPLEQ_HEAD(job_queue, job); + +struct chipidea_pdata { + struct chipidea_opreg *opreg; + struct qh *qhlist; + struct job_queue job_queue[16][2]; + int ep_busy[16][2]; +}; + +#endif diff --git a/payloads/libpayload/drivers/udc/udc.c b/payloads/libpayload/drivers/udc/udc.c new file mode 100644 index 0000000000..cdc2b29f95 --- /dev/null +++ b/payloads/libpayload/drivers/udc/udc.c @@ -0,0 +1,327 @@ +/* + * This file is part of the libpayload project. + * + * Copyright (C) 2015 Google Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#ifdef DEBUG +#define debug(x...) printf(x) +#else +#define debug(x...) do {} while (0) +#endif + +#define min(a, b) (((a) < (b)) ? (a) : (b)) + +// TODO: make this right +#define ZLP(len, explen) 0 + +static struct usbdev_configuration *fetch_config(struct usbdev_ctrl *this, + int id) +{ + struct usbdev_configuration *config; + SLIST_FOREACH(config, &this->configs, list) { + debug("checking descriptor %d\n", + config->descriptor.bConfigurationValue); + if (config->descriptor.bConfigurationValue == id) + return config; + } + return NULL; +} + +static void enable_interface(struct usbdev_ctrl *this, int iface_num) +{ + struct usbdev_configuration *config = this->current_config; + struct usbdev_interface *iface = &config->interfaces[iface_num]; + + /* first: shut down all endpoints except EP0 */ + int i; + for (i = 1; i < 16; i++) { + /* disable endpoints */ + this->halt_ep(this, i, 0); + this->halt_ep(this, i, 1); + } + + /* now enable all configured endpoints */ + int epcount = iface->descriptor.bNumEndpoints; + for (i = 0; i < epcount; i++) { + int ep = iface->eps[i].bEndpointAddress; + int mps = iface->eps[i].wMaxPacketSize; + int in_dir = 0; + if (ep & 0x80) { + in_dir = 1; + ep &= 0x7f; + } + int ep_type = iface->eps[i].bmAttributes & 0x3; + this->start_ep(this, ep, in_dir, ep_type, mps); + } + + // gadget specific configuration + if (iface->init) + iface->init(this); +} + +/** + * handle default control transfers on EP 0 + * + * returns 1 if transfer was handled + */ +static int setup_ep0(struct usbdev_ctrl *this, dev_req_t *dr) +{ + if ((dr->bmRequestType == 0x00) && + (dr->bRequest == SET_ADDRESS)) { + this->set_address(this, dr->wValue & 0x7f); + + /* status phase IN */ + this->enqueue_packet(this, 0, 1, NULL, 0, 0, 0); + return 1; + } else + if ((dr->bmRequestType == 0x00) && + (dr->bRequest == SET_CONFIGURATION)) { + struct usbdev_configuration *config = + fetch_config(this, dr->wValue); + + this->current_config = config; + this->current_config_id = dr->wValue; + + if (dr->wValue == 0) + // TODO: reset device + return 1; + + if (config == NULL) { + this->stall(this, 0, 0, 1); + this->stall(this, 0, 1, 1); + return 1; + } + + /* status phase IN */ + this->enqueue_packet(this, 0, 1, NULL, 0, 0, 0); + + /* automatically configure endpoints in interface 0 */ + enable_interface(this, 0); + this->initialized = 1; + return 1; + } else + if ((dr->bmRequestType == 0x80) && + (dr->bRequest == GET_CONFIGURATION)) { + unsigned char *res = dma_malloc(1); + res[0] = this->current_config_id; + + /* data phase IN */ + this->enqueue_packet(this, 0, 1, res, 1, 0, 1); + + // status phase OUT + this->enqueue_packet(this, 0, 0, NULL, 0, 0, 0); + return 1; + } else + // ENDPOINT_HALT + if ((dr->bmRequestType == 0x02) && // endpoint + (dr->bRequest == CLEAR_FEATURE) && + (dr->wValue == 0)) { + int ep = dr->wIndex; + /* clear STALL */ + this->stall(this, ep & 0xf, ep & 0x80, 0); + + /* status phase IN */ + this->enqueue_packet(this, 0, 1, NULL, 0, 0, 0); + return 1; + } else + // ENDPOINT_HALT + if ((dr->bmRequestType == 0x02) && // endpoint + (dr->bRequest == SET_FEATURE) && + (dr->wValue == 0)) { + int ep = dr->wIndex; + /* set STALL */ + this->stall(this, ep & 0xf, ep & 0x80, 1); + + /* status phase IN */ + this->enqueue_packet(this, 0, 1, NULL, 0, 0, 0); + return 1; + } else + // DEVICE_REMOTE_WAKEUP + if ((dr->bmRequestType == 0x00) && + (dr->bRequest == CLEAR_FEATURE) && + (dr->wValue == 1)) { + this->remote_wakeup = 0; + + /* status phase IN */ + this->enqueue_packet(this, 0, 1, NULL, 0, 0, 0); + return 1; + } else + // DEVICE_REMOTE_WAKEUP + if ((dr->bmRequestType == 0x00) && + (dr->bRequest == SET_FEATURE) && + (dr->wValue == 1)) { + this->remote_wakeup = 1; + + /* status phase IN */ + this->enqueue_packet(this, 0, 1, NULL, 0, 0, 0); + return 1; + } else + if ((dr->bmRequestType == 0x82) && // endpoint + (dr->bRequest == GET_STATUS)) { + unsigned char *res = dma_malloc(2); + int ep = dr->wIndex; + /* is EP halted? */ + res[0] = this->ep_halted[ep & 0xf][(ep & 0x80) ? 1 : 0]; + res[1] = 0; + + /* data phase IN */ + this->enqueue_packet(this, 0, 1, res, + min(2, dr->wLength), 0, 1); + + // status phase OUT + this->enqueue_packet(this, 0, 0, NULL, 0, 0, 0); + return 1; + } else + if ((dr->bmRequestType == 0x80) && + (dr->bRequest == GET_STATUS)) { + unsigned char *res = dma_malloc(2); + res[0] = 1; // self powered + if (this->remote_wakeup) + res[0] |= 2; + + res[1] = 0; + + /* data phase IN */ + this->enqueue_packet(this, 0, 1, res, + min(2, dr->wLength), 0, 1); + + // status phase OUT + this->enqueue_packet(this, 0, 0, NULL, 0, 0, 0); + return 1; + } else + if ((dr->bmRequestType == 0x80) && + (dr->bRequest == GET_DESCRIPTOR) && + ((dr->wValue & 0xff00) == 0x0200)) { + int i, j; + /* config descriptor #id + * since config = 0 is undefined, but descriptors + * should start at 0, add 1 to have them match up. + */ + int id = (dr->wValue & 0xff) + 1; + struct usbdev_configuration *config = fetch_config(this, id); + if (config == NULL) { + this->stall(this, 0, 0, 1); + this->stall(this, 0, 1, 1); + return 1; + } + debug("descriptor found, should be %d bytes\n", + config->descriptor.wTotalLength); + + uint8_t *data = dma_malloc(config->descriptor.wTotalLength); + uint8_t *head = data; + + memcpy(head, &config->descriptor, + sizeof(configuration_descriptor_t)); + head += sizeof(configuration_descriptor_t); + + for (i = 0; i < config->descriptor.bNumInterfaces; i++) { + memcpy(head, &config->interfaces[i].descriptor, + sizeof(interface_descriptor_t)); + head += sizeof(interface_descriptor_t); + for (j = 0; + j < config->interfaces[i].descriptor.bNumEndpoints; + j++) { + memcpy(head, &config->interfaces[i].eps[j], + sizeof(endpoint_descriptor_t)); + head += sizeof(endpoint_descriptor_t); + } + } + int size = config->descriptor.wTotalLength; + assert((head - data) == config->descriptor.wTotalLength); + + /* data phase IN */ + this->enqueue_packet(this, 0, 1, data, + min(size, dr->wLength), + ZLP(size, dr->wLength), 1); + + /* status phase OUT */ + this->enqueue_packet(this, 0, 0, NULL, 0, 0, 0); + return 1; + } else + if ((dr->bmRequestType == 0x80) && + (dr->bRequest == GET_DESCRIPTOR) && + ((dr->wValue & 0xff00) == 0x0100)) { + device_descriptor_t *dd = dma_malloc(sizeof(*dd)); + memcpy(dd, &this->device_descriptor, sizeof(*dd)); + dd->bNumConfigurations = this->config_count; + + /* data phase IN */ + this->enqueue_packet(this, 0, 1, (void *)dd, + min(sizeof(*dd), dr->wLength), + ZLP(sizeof(*dd), dr->wLength), 1); + + /* status phase OUT */ + this->enqueue_packet(this, 0, 0, NULL, 0, 0, 0); + return 1; + } + return 0; +} + +void udc_add_gadget(struct usbdev_ctrl *this, + struct usbdev_configuration *config) +{ + int i, size; + SLIST_INSERT_HEAD(&this->configs, config, list); + + size = sizeof(configuration_descriptor_t); + + for (i = 0; i < config->descriptor.bNumInterfaces; i++) { + size += sizeof(config->interfaces[i].descriptor); + size += config->interfaces[i].descriptor.bNumEndpoints * + sizeof(endpoint_descriptor_t); + } + config->descriptor.wTotalLength = size; + config->descriptor.bConfigurationValue = ++this->config_count; +} + +void udc_handle_setup(struct usbdev_ctrl *this, int ep, dev_req_t *dr) +{ + if ((ep == 0) && setup_ep0(this, dr)) + return; + + if (this->current_config && + this->current_config->interfaces[0].handle_setup && + this->current_config->interfaces[0].handle_setup(this, ep, dr)) + return; + + /* no successful SETUP transfer should end up here, report error */ + this->halt_ep(this, ep, 0); + this->halt_ep(this, ep, 1); +} + diff --git a/payloads/libpayload/include/udc/chipidea.h b/payloads/libpayload/include/udc/chipidea.h new file mode 100644 index 0000000000..41b8385647 --- /dev/null +++ b/payloads/libpayload/include/udc/chipidea.h @@ -0,0 +1,37 @@ +/* + * This file is part of the libpayload project. + * + * Copyright (C) 2015 Google Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef __CHIPIDEA_H__ +#define __CHIPIDEA_H__ + +#include "udc.h" + +struct usbdev_ctrl *chipidea_init(device_descriptor_t *dd); + +#endif diff --git a/payloads/libpayload/include/udc/udc.h b/payloads/libpayload/include/udc/udc.h new file mode 100644 index 0000000000..48e73f4c56 --- /dev/null +++ b/payloads/libpayload/include/udc/udc.h @@ -0,0 +1,141 @@ +/* + * This file is part of the libpayload project. + * + * Copyright (C) 2015 Google Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef __UDC_H__ +#define __UDC_H__ + +#include +#include + +struct usbdev_ctrl; + +struct usbdev_interface { + interface_descriptor_t descriptor; + void (*init)(struct usbdev_ctrl *); + + /** + * handle_packet: called by the controller driver for incoming packets + * + * @param ep endpoint the packet is for + * + * @param in_dir 1, if it's an IN or INTR transfer. + * 0 for OUT, SETUP is handled in handle_setup + * + * @param len Actual transfer length in bytes. Can differ from the + * scheduled length if the host requested a smaller + * transfer than we prepared for. + */ + void (*handle_packet)(struct usbdev_ctrl *, int ep, int in_dir, + void *data, int len); + + /** + * handle_setup: called by the controller driver for setup packets + * + * @param ep endpoint the SETUP request came up on + * @param dr SETUP request data + */ + int (*handle_setup)(struct usbdev_ctrl *, int ep, dev_req_t *dr); + endpoint_descriptor_t *eps; +}; + +struct usbdev_configuration { + configuration_descriptor_t descriptor; + SLIST_ENTRY(usbdev_configuration) list; + struct usbdev_interface interfaces[]; +}; + +SLIST_HEAD(configuration_list, usbdev_configuration); + +struct usbdev_ctrl { + /* private data */ + void *pdata; + + int initialized; + int remote_wakeup; + + struct usbdev_configuration *current_config; + int current_config_id; + + struct configuration_list configs; + int config_count; + device_descriptor_t device_descriptor; + + int ep_halted[16][2]; + + /** returns 0 if an error occurred */ + int (*poll)(struct usbdev_ctrl *); + + /** + * Add a gadget driver that exposes properties described in config. + * + * Each gadget driver is registered and exposed as separate USB + * "configuration", so the host can choose between them. + */ + void (*add_gadget)(struct usbdev_ctrl *, + struct usbdev_configuration *config); + + /** + * Add packet to process by the controller. + * zlp: zero length packet, if such a termination is necessary + * autofree: free data after use + */ + void (*enqueue_packet)(struct usbdev_ctrl *this, int endpoint, + int in_dir, void *data, int len, int zlp, int autofree); + + /** + * Tell the hardware that it should listen to a new address + */ + void (*set_address)(struct usbdev_ctrl *, int address); + + void (*halt_ep)(struct usbdev_ctrl *this, int ep, int in_dir); + void (*start_ep)(struct usbdev_ctrl *this, + int ep, int in_dir, int ep_type, int mps); + + /** + * Set or clear endpoint ep's STALL state + */ + void (*stall)(struct usbdev_ctrl *, uint8_t ep, int in_dir, int set); + + void (*shutdown)(struct usbdev_ctrl *this); + + /** + * Allocate n bytes for use as data + */ + void *(*alloc_data)(size_t n); + /** + * Free memory object allocated with alloc_data() + */ + void (*free_data)(void *); +}; + +void udc_add_gadget(struct usbdev_ctrl *this, + struct usbdev_configuration *config); +void udc_handle_setup(struct usbdev_ctrl *this, int ep, dev_req_t *dr); + +#endif -- cgit v1.2.3