From 134d8a94de060a6d09d663167379d895c0af86fc Mon Sep 17 00:00:00 2001 From: Kerry Sheh Date: Tue, 7 Feb 2012 20:33:21 +0800 Subject: HWM: Nuvoton W83795G/ADG HWM support Supermicro H8QGI-F 1 Unit Chassis contain 9 system Fans, they are controled by a separate W83795G Hardware Monitor chip. This patch adds Nuvoton W83795G/ADG HWM support. Change-Id: I8756f5ed02dc2fa0884cde36e51451fd8aacee27 Signed-off-by: Kerry Sheh Signed-off-by: Kerry Sheh Reviewed-on: http://review.coreboot.org/569 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones --- src/drivers/i2c/Kconfig | 1 + src/drivers/i2c/Makefile.inc | 1 + src/drivers/i2c/w83795/Kconfig | 2 + src/drivers/i2c/w83795/Makefile.inc | 1 + src/drivers/i2c/w83795/chip.h | 4 + src/drivers/i2c/w83795/w83795.c | 261 +++++++++++++++++++++++++++ src/drivers/i2c/w83795/w83795.h | 73 ++++++++ src/mainboard/supermicro/h8qgi/Kconfig | 1 + src/mainboard/supermicro/h8qgi/devicetree.cb | 8 +- src/mainboard/supermicro/h8qgi/romstage.c | 6 + 10 files changed, 356 insertions(+), 2 deletions(-) create mode 100644 src/drivers/i2c/w83795/Kconfig create mode 100644 src/drivers/i2c/w83795/Makefile.inc create mode 100644 src/drivers/i2c/w83795/chip.h create mode 100644 src/drivers/i2c/w83795/w83795.c create mode 100644 src/drivers/i2c/w83795/w83795.h diff --git a/src/drivers/i2c/Kconfig b/src/drivers/i2c/Kconfig index 91ad025149..09c306b1e6 100644 --- a/src/drivers/i2c/Kconfig +++ b/src/drivers/i2c/Kconfig @@ -4,3 +4,4 @@ source src/drivers/i2c/adt7463/Kconfig source src/drivers/i2c/i2cmux/Kconfig source src/drivers/i2c/i2cmux2/Kconfig source src/drivers/i2c/lm63/Kconfig +source src/drivers/i2c/w83795/Kconfig diff --git a/src/drivers/i2c/Makefile.inc b/src/drivers/i2c/Makefile.inc index d462b694a3..97e9729957 100644 --- a/src/drivers/i2c/Makefile.inc +++ b/src/drivers/i2c/Makefile.inc @@ -4,3 +4,4 @@ subdirs-y += adt7463 subdirs-y += i2cmux subdirs-y += i2cmux2 subdirs-y += lm63 +subdirs-y += w83795 diff --git a/src/drivers/i2c/w83795/Kconfig b/src/drivers/i2c/w83795/Kconfig new file mode 100644 index 0000000000..80856e2b3b --- /dev/null +++ b/src/drivers/i2c/w83795/Kconfig @@ -0,0 +1,2 @@ +config DRIVERS_I2C_W83795 + bool diff --git a/src/drivers/i2c/w83795/Makefile.inc b/src/drivers/i2c/w83795/Makefile.inc new file mode 100644 index 0000000000..708a170b2e --- /dev/null +++ b/src/drivers/i2c/w83795/Makefile.inc @@ -0,0 +1 @@ +driver-$(CONFIG_DRIVERS_I2C_W83795) += w83795.c diff --git a/src/drivers/i2c/w83795/chip.h b/src/drivers/i2c/w83795/chip.h new file mode 100644 index 0000000000..290063682f --- /dev/null +++ b/src/drivers/i2c/w83795/chip.h @@ -0,0 +1,4 @@ +extern struct chip_operations drivers_i2c_w83795_ops; + +struct drivers_i2c_w83795_config { +}; diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c new file mode 100644 index 0000000000..392471a9a8 --- /dev/null +++ b/src/drivers/i2c/w83795/w83795.c @@ -0,0 +1,261 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include "southbridge/amd/cimx/sb700/smbus.h" /*SMBUS_IO_BASE*/ +#include "w83795.h" + +static u32 w83795_set_bank(u8 bank) +{ + return do_smbus_write_byte(SMBUS_IO_BASE, W83795_DEV, W83795_REG_BANKSEL, bank); +} + +static u8 w83795_read(u16 reg) +{ + u32 ret; + + ret = w83795_set_bank(reg >> 8); + if (ret < 0) { + printk(BIOS_DEBUG, "read faild to set bank %x\n", reg >> 8); + return -1; + } + + ret = do_smbus_read_byte(SMBUS_IO_BASE, W83795_DEV, reg & 0xff); + return ret; +} + +static u8 w83795_write(u16 reg, u8 value) +{ + u32 err; + + err = w83795_set_bank(reg >> 8); + if (err < 0) { + printk(BIOS_DEBUG, "write faild to set bank %x\n", reg >> 8); + return -1; + } + + err = do_smbus_write_byte(SMBUS_IO_BASE, W83795_DEV, reg & 0xff, value); + return err; +} + +/* + * Enable Digital Temperature Sensor + */ +static void w83795_dts_enable(u8 dts_src) +{ + u8 val; + + /* DIS */ + val = w83795_read(W83795_REG_DTSC); + val |= (dts_src & 0x01); + w83795_write(W83795_REG_DTSC, val); + + /* DTSE */ + val = w83795_read(W83795_REG_DTSE); + val |= 0xFF; + w83795_write(W83795_REG_DTSE, val); + + /* store bank3 regs first before enable DTS */ + + /* + * TD/TR1-4 termal diode by default + * 0x00 Disable + * 0x01 thermistors on motherboard + * 0x10 different mode voltage + * 0x11 CPU internal thermal diode output + * + * TR5-6 thermistors by default TRn + */ + val = 0x55; /* thermal diode */ + w83795_write(W83795_REG_TEMP_CTRL2, val); + + /* Enable Digital Temperature Sensor */ + val = w83795_read(W83795_REG_TEMP_CTRL1); + val |= W83795_REG_TEMP_CTRL1_EN_DTS; /* EN_DTS */ + w83795_write(W83795_REG_TEMP_CTRL1, val); +} + +static void w83795_set_tfmr(w83795_fan_mode_t mode) +{ + u8 val; + u8 i; + + if ((mode == SMART_FAN_MODE) || (mode == THERMAL_CRUISE_MODE)) { + val = 0xFF; + } else { + val = 0x00; + } + + for (i = 0; i < 6; i++) + w83795_write(W83795_REG_TFMR(i), val); +} + +static u32 w83795_set_fan_mode(w83795_fan_mode_t mode) +{ + if (mode == SPEED_CRUISE_MODE) { + w83795_write(W83795_REG_FCMS1, 0xFF); + printk(BIOS_INFO, "W83795G/ADG work in Speed Cruise Mode\n"); + } else { + w83795_write(W83795_REG_FCMS1, 0x00); + if (mode == THERMAL_CRUISE_MODE) { + w83795_write(W83795_REG_FCMS2, 0x00); + printk(BIOS_INFO, "W83795G/ADG work in Thermal Cruise Mode\n"); + } else if (mode == SMART_FAN_MODE) { + w83795_write(W83795_REG_FCMS2, 0x3F); + printk(BIOS_INFO, "W83795G/ADG work in Smart Fan Mode\n"); + } else { + printk(BIOS_INFO, "W83795G/ADG work in Manual Mode\n"); + return -1; + } + } + + return 0; +} + +static void w83795_set_tss(void) +{ + u8 val; + + val = 0x00; + w83795_write(W83795_REG_TSS(0), val); /* Temp1, 2 */ + w83795_write(W83795_REG_TSS(1), val); /* Temp3, 4 */ + w83795_write(W83795_REG_TSS(2), val); /* Temp5, 6 */ +} + +static void w83795_set_fan(w83795_fan_mode_t mode) +{ + u8 i; + + /* select temperature sensor (TSS)*/ + w83795_set_tss(); + + /* select Temperature to Fan mapping Relationships (TFMR)*/ + w83795_set_tfmr(mode); + + /* set fan output controlled mode (FCMS)*/ + w83795_set_fan_mode(mode); + + /* Set Critical Temperature to Full Speed all fan (CTFS) */ + for (i = 0; i < 6; i++) { + w83795_write(W83795_REG_CTFS(i), 0x50); /* default 80 celsius degree */ + } + + if (mode == THERMAL_CRUISE_MODE) { + /* Set Target Temperature of Temperature Inputs (TTTI) */ + for (i = 0; i < 6; i++) { + w83795_write(W83795_REG_TTTI(i), 0x28); /* default 40 celsius degree */ + } + } else if (mode == SMART_FAN_MODE) { + /* Set the Relative Register-at SMART FAN IV Control Mode Table */ + //SFIV TODO + } + + /* Set Hystersis of Temperature (HT) */ + //TODO +} + +static void w83795_init(w83795_fan_mode_t mode, u8 dts_src) +{ + u8 i; + u8 val; + + if (do_smbus_read_byte(SMBUS_IO_BASE, W83795_DEV, 0x00) < 0) { + printk(BIOS_ERR, "W83795G/ADG Nuvoton H/W Monitor not found\n"); + return; + } + val = w83795_read(W83795_REG_CONFIG); + if ((val & W83795_REG_CONFIG_CONFIG48) == 0) + printk(BIOS_INFO, "Found 64 pin W83795G Nuvoton H/W Monitor\n"); + else if ((val & W83795_REG_CONFIG_CONFIG48) == 1) + printk(BIOS_INFO, "Found 48 pin W83795ADG Nuvoton H/W Monitor\n"); + + /* Reset */ + val |= W83795_REG_CONFIG_INIT; + w83795_write(W83795_REG_CONFIG, val); + + /* Fan monitoring setting */ + val = 0xFF; /* FAN1-FAN8 */ + w83795_write(W83795_REG_FANIN_CTRL1, val); + val = 0x3F; /* FAN9-FAN14 */ + w83795_write(W83795_REG_FANIN_CTRL2, val); + + /* enable monitoring operations */ + val = w83795_read(W83795_REG_CONFIG); + val |= W83795_REG_CONFIG_START; + w83795_write(W83795_REG_CONFIG, val); + + w83795_dts_enable(dts_src); + w83795_set_fan(mode); + + printk(BIOS_INFO, "Fan CTFS(celsius) TTTI(celsius)\n"); + for (i = 0; i < 6; i++) { + val = w83795_read(W83795_REG_CTFS(i)); + printk(BIOS_INFO, " %x %d", i, val); + val = w83795_read(W83795_REG_TTTI(i)); + printk(BIOS_INFO, " %d\n", val); + } + + /* Temperature ReadOut */ + for (i = 0; i < 9; i++) { + val = w83795_read(W83795_REG_DTS(i)); + printk(BIOS_DEBUG, "DTS%x ReadOut=%x \n", i, val); + } +} + +static void w83795_hwm_init(device_t dev) +{ + struct device *cpu; + struct cpu_info *info; + + info = cpu_info(); + cpu = info->cpu; + if (!cpu) + die("CPU: missing cpu device structure"); + + if (cpu->vendor == X86_VENDOR_AMD) + w83795_init(THERMAL_CRUISE_MODE, DTS_SRC_AMD_SBTSI); + else if (cpu->vendor == X86_VENDOR_INTEL) + w83795_init(THERMAL_CRUISE_MODE, DTS_SRC_INTEL_PECI); + else + printk(BIOS_ERR, "Neither AMD nor INTEL CPU detected\n"); +} + +static void w83795_noop(device_t dummy) +{ +} + +static struct device_operations w83795_operations = { + .read_resources = w83795_noop, + .set_resources = w83795_noop, + .enable_resources = w83795_noop, + .init = w83795_hwm_init, +}; + +static void enable_dev(device_t dev) +{ + dev->ops = &w83795_operations; +} + +struct chip_operations drivers_i2c_w83795_ops = { + CHIP_NAME("Nuvoton W83795G/ADG Hardware Monitor") + .enable_dev = enable_dev, +}; diff --git a/src/drivers/i2c/w83795/w83795.h b/src/drivers/i2c/w83795/w83795.h new file mode 100644 index 0000000000..de0a554f5d --- /dev/null +++ b/src/drivers/i2c/w83795/w83795.h @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _W83795_H_ +#define _W83795_H_ + +#define W83795_DEV 0x2F /* Host I2c Addr (strap to addr1 addr0 1 1, 0x5E) */ + +#define W83795_REG_I2C_ADDR 0xFC +#define W83795_REG_BANKSEL 0x00 +#define W83795_REG_CONFIG 0x01 +#define W83795_REG_CONFIG_START 0x01 +#define W83795_REG_CONFIG_CONFIG48 0x04 +#define W83795_REG_CONFIG_INIT 0x80 + +#define W83795_REG_TEMP_CTRL1 0x04 /* Temperature Monitoring Control Register */ +#define W83795_REG_TEMP_CTRL2 0x05 /* Temperature Monitoring Control Register */ +#define W83795_REG_FANIN_CTRL1 0x06 +#define W83795_REG_FANIN_CTRL2 0x07 +#define W83795_REG_TEMP_CTRL1_EN_DTS 0x20 /* Enable DTS (Digital Temperature Sensor) interface from INTEL PECI or AMD SB-TSI. */ +#define DTS_SRC_INTEL_PECI (0 << 0) +#define DTS_SRC_AMD_SBTSI (1 << 0) + +#define W83795_REG_TSS(n) (0x209 + (n)) /* Temperature Source Selection Register */ +#define W83795_REG_TTTI(n) (0x260 + (n)) /* tarrget temperature W83795G/ADG will try to tune the fan output to keep */ +#define W83795_REG_CTFS(n) (0x268 + (n)) /* Critical Temperature to Full Speed all fan */ +#define W83795_REG_HT(n) (0x270 + (n)) /* Hystersis of Temperature */ +#define W83795_REG_DTSC 0x301 /* Digital Temperature Sensor Configuration */ + +#define W83795_REG_DTSE 0x302 /* Digital Temperature Sensor Enable */ +#define W83795_REG_DTS(n) (0x26 + (n)) +#define W83795_REG_VRLSB 0x3C + +#define W83795_TEMP_REG_TR1 0x21 +#define W83795_TEMP_REG_TR2 0x22 +#define W83795_TEMP_REG_TR3 0x23 +#define W83795_TEMP_REG_TR4 0x24 +#define W83795_TEMP_REG_TR5 0x1F +#define W83795_TEMP_REG_TR6 0x20 + +#define W83795_REG_FCMS1 0x201 +#define W83795_REG_FCMS2 0x208 +#define W83795_REG_TFMR(n) (0x202 + (n)) /*temperature to fam mappig*/ +#define W83795_REG_DFSP 0x20C + +#define W83795_REG_FTSH(n) (0x240 + (n) * 2) +#define W83795_REG_FTSL(n) (0x241 + (n) * 2) +#define W83795_REG_TFTS 0x250 + +typedef enum w83795_fan_mode { + SPEED_CRUISE_MODE, ///< Fan Speed Cruise mode keeps the fan speed in a specified range + THERMAL_CRUISE_MODE, ///< Thermal Cruise mode is an algorithm to control the fan speed to keep the temperature source around the TTTI + SMART_FAN_MODE, ///< Smart Fan mode offers 6 slopes to control the fan speed + MANUAL_MODE, ///< control manually +} w83795_fan_mode_t; + +#endif diff --git a/src/mainboard/supermicro/h8qgi/Kconfig b/src/mainboard/supermicro/h8qgi/Kconfig index e900ea8399..58f56929ac 100644 --- a/src/mainboard/supermicro/h8qgi/Kconfig +++ b/src/mainboard/supermicro/h8qgi/Kconfig @@ -30,6 +30,7 @@ config BOARD_SPECIFIC_OPTIONS select SOUTHBRIDGE_AMD_CIMX_SB700 select SUPERIO_WINBOND_W83627DHG select SUPERIO_NUVOTON_WPCM450 + select DRIVERS_I2C_W83795 select UDELAY_TSC select BOARD_HAS_FADT select HAVE_BUS_CONFIG diff --git a/src/mainboard/supermicro/h8qgi/devicetree.cb b/src/mainboard/supermicro/h8qgi/devicetree.cb index 9d77a73463..8ecf96880e 100644 --- a/src/mainboard/supermicro/h8qgi/devicetree.cb +++ b/src/mainboard/supermicro/h8qgi/devicetree.cb @@ -84,8 +84,8 @@ chip northbridge/amd/agesa/family15/root_complex irq 0x70 = 0x01 #keyboard irq 0x72 = 0x0C #mouse end - #device pnp 2e.6 off # SPI - #end + device pnp 2e.6 off # SPI + end device pnp 2e.307 off # GPIO6 end device pnp 2e.8 off # WDTO#, PLED @@ -106,6 +106,10 @@ chip northbridge/amd/agesa/family15/root_complex device pnp 2e.c off # PECI, SST end end #superio/winbond/w83627dhg + chip drivers/i2c/w83795 + device pnp 5e on #hwm + end + end #drivers/i2c/w83795 end # LPC device pci 14.4 on end # PCI 0x4384 device pci 14.5 on end # USB 3 diff --git a/src/mainboard/supermicro/h8qgi/romstage.c b/src/mainboard/supermicro/h8qgi/romstage.c index ba8c5e5f6e..d4354fd92f 100644 --- a/src/mainboard/supermicro/h8qgi/romstage.c +++ b/src/mainboard/supermicro/h8qgi/romstage.c @@ -90,6 +90,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } post_code(0x3C); + /* W83627DHG pin89,90 function select is RSTOUT3#, RSTOUT2# by default. + * In order to access W83795G/ADG HWM using I2C protocol, + * we select function to SDA, SCL function (or GP33, GP32 function). + */ + w83627dhg_enable_i2c(PNP_DEV(0x2E, W83627DHG_SPI)); + nb_Ht_Init(); post_code(0x3D); /* Reset for HT, FIDVID, PLL and ucode patch(errata) changes to take affect. */ -- cgit v1.2.3