From 0ea281f70077b6f8d69d3070447205b7afd6883a Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Mon, 11 Oct 2010 21:38:49 +0000 Subject: First round of ICH2/ICH2-M cleanups after split from i82801xx. - Drop all non-ICH2 "struct pci_driver" entries from all files. - Kconfig: Add missing USE_WATCHDOG_ON_BOOT. - Drop i82801bx_sata.c and i82801bx_usb_ehci.c, ICH2 doesn't have SATA/EHCI. - Simplify lots of code, getting rid of i82801xx remainders. - Use u8 et al (instead of uint8_t) in a few more places. - Use #defines from header files where possible. - Various other fixes and updates. Signed-off-by: Uwe Hermann Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5938 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/intel/i82801bx/Kconfig | 1 + src/southbridge/intel/i82801bx/Makefile.inc | 2 - src/southbridge/intel/i82801bx/chip.h | 38 ++---- src/southbridge/intel/i82801bx/i82801bx.c | 37 ++---- src/southbridge/intel/i82801bx/i82801bx.h | 39 +++--- src/southbridge/intel/i82801bx/i82801bx_ac97.c | 80 ------------ .../intel/i82801bx/i82801bx_early_smbus.c | 12 +- src/southbridge/intel/i82801bx/i82801bx_ide.c | 86 +++---------- src/southbridge/intel/i82801bx/i82801bx_lpc.c | 140 ++++++--------------- src/southbridge/intel/i82801bx/i82801bx_nic.c | 41 +----- src/southbridge/intel/i82801bx/i82801bx_pci.c | 30 +---- src/southbridge/intel/i82801bx/i82801bx_sata.c | 82 ------------ src/southbridge/intel/i82801bx/i82801bx_smbus.c | 49 -------- src/southbridge/intel/i82801bx/i82801bx_usb.c | 111 ---------------- src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c | 84 ------------- 15 files changed, 102 insertions(+), 730 deletions(-) delete mode 100644 src/southbridge/intel/i82801bx/i82801bx_sata.c delete mode 100644 src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c diff --git a/src/southbridge/intel/i82801bx/Kconfig b/src/southbridge/intel/i82801bx/Kconfig index 4b307d5697..00cb5bfa90 100644 --- a/src/southbridge/intel/i82801bx/Kconfig +++ b/src/southbridge/intel/i82801bx/Kconfig @@ -20,4 +20,5 @@ config SOUTHBRIDGE_INTEL_I82801BX bool select HAVE_HARD_RESET + select USE_WATCHDOG_ON_BOOT diff --git a/src/southbridge/intel/i82801bx/Makefile.inc b/src/southbridge/intel/i82801bx/Makefile.inc index d25ad8b037..cd9c1574a2 100644 --- a/src/southbridge/intel/i82801bx/Makefile.inc +++ b/src/southbridge/intel/i82801bx/Makefile.inc @@ -24,10 +24,8 @@ driver-y += i82801bx_ide.c driver-y += i82801bx_lpc.c driver-y += i82801bx_nic.c driver-y += i82801bx_pci.c -driver-y += i82801bx_sata.c driver-y += i82801bx_smbus.c driver-y += i82801bx_usb.c -driver-y += i82801bx_usb_ehci.c ramstage-y += i82801bx_reset.c ramstage-y += i82801bx_watchdog.c diff --git a/src/southbridge/intel/i82801bx/chip.h b/src/southbridge/intel/i82801bx/chip.h index a168e8502e..5cdfc5da50 100644 --- a/src/southbridge/intel/i82801bx/chip.h +++ b/src/southbridge/intel/i82801bx/chip.h @@ -19,38 +19,26 @@ */ /* - * The i82801bx code currently supports: - * - 82801AA - * - 82801AB - * - 82801BA - * - 82801CA - * - 82801DB - * - 82801DBM - * - 82801EB - * - 82801ER - * - * This code should NOT be used for ICH6 and later versions. + * The i82801bx code supports: 82801BA/82801BAM (ICH2/ICH2-M) */ #ifndef SOUTHBRIDGE_INTEL_I82801BX_CHIP_H #define SOUTHBRIDGE_INTEL_I82801BX_CHIP_H +#include + struct southbridge_intel_i82801bx_config { - /** - * Interrupt Routing configuration - * If bit7 is 1, the interrupt is disabled. - */ - uint8_t pirqa_routing; - uint8_t pirqb_routing; - uint8_t pirqc_routing; - uint8_t pirqd_routing; - uint8_t pirqe_routing; - uint8_t pirqf_routing; - uint8_t pirqg_routing; - uint8_t pirqh_routing; + u8 pirqa_routing; + u8 pirqb_routing; + u8 pirqc_routing; + u8 pirqd_routing; + u8 pirqe_routing; + u8 pirqf_routing; + u8 pirqg_routing; + u8 pirqh_routing; - uint8_t ide0_enable; - uint8_t ide1_enable; + u8 ide0_enable; + u8 ide1_enable; }; extern struct chip_operations southbridge_intel_i82801bx_ops; diff --git a/src/southbridge/intel/i82801bx/i82801bx.c b/src/southbridge/intel/i82801bx/i82801bx.c index 2352723935..7f59977ab2 100644 --- a/src/southbridge/intel/i82801bx/i82801bx.c +++ b/src/southbridge/intel/i82801bx/i82801bx.c @@ -27,38 +27,21 @@ void i82801bx_enable(device_t dev) { - unsigned int index = 0; - uint16_t cur_disable_mask, new_disable_mask; + u16 reg16, index; + device_t lpc_dev; - /* All 82801xx devices should be on bus 0. */ - unsigned int devfn = PCI_DEVFN(0x1f, 0); // LPC - device_t lpc_dev = dev_find_slot(0, devfn); // 0 + /* Search for the 82801BA/BAM LPC device (D31:F0) on PCI bus 0. */ + lpc_dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); if (!lpc_dev) return; - /* We're going to assume, perhaps incorrectly, that if a function - * exists it can be disabled. Workarounds for ICH variants that don't - * follow this should be done by checking the device ID. - */ - if (PCI_SLOT(dev->path.pci.devfn) == 31) { - index = PCI_FUNC(dev->path.pci.devfn); - } else if (PCI_SLOT(dev->path.pci.devfn) == 29) { - index = 8 + PCI_FUNC(dev->path.pci.devfn); - } + index = PCI_FUNC(dev->path.pci.devfn); - /* Function 0 is a bit of an exception. */ - if (index == 0) { - index = 14; - } - - cur_disable_mask = pci_read_config16(lpc_dev, FUNC_DIS); - new_disable_mask = cur_disable_mask & ~(1 << index); /* Enable it. */ - if (!dev->enabled) { - new_disable_mask |= (1 << index); /* Disable it, if desired. */ - } - if (new_disable_mask != cur_disable_mask) { - pci_write_config16(lpc_dev, FUNC_DIS, new_disable_mask); - } + reg16 = pci_read_config16(lpc_dev, FUNC_DIS); + reg16 &= ~(1 << index); /* Enable device. */ + if (!dev->enabled) + reg16 |= (1 << index); /* Disable device, if desired. */ + pci_write_config16(lpc_dev, FUNC_DIS, reg16); } struct chip_operations southbridge_intel_i82801bx_ops = { diff --git a/src/southbridge/intel/i82801bx/i82801bx.h b/src/southbridge/intel/i82801bx/i82801bx.h index 70f573f96c..eae6de6d86 100644 --- a/src/southbridge/intel/i82801bx/i82801bx.h +++ b/src/southbridge/intel/i82801bx/i82801bx.h @@ -26,6 +26,13 @@ extern void i82801bx_enable(device_t dev); #endif +#define SMBUS_IO_BASE 0x0f00 +#define PMBASE_ADDR 0x0400 +#define GPIO_BASE_ADDR 0x0500 +#define HPET_ADDR 0xfed00000 + +#define SECSTS 0x1e + #define PCI_DMA_CFG 0x90 #define SERIRQ_CNTL 0x64 #define GEN_CNTL 0xd0 @@ -34,11 +41,12 @@ extern void i82801bx_enable(device_t dev); #define GEN_PMCON_3 0xa4 #define PMBASE 0x40 -#define PMBASE_ADDR 0x0400 /* ACPI Base Address Register */ #define ACPI_CNTL 0x44 +#define ACPI_EN (1 << 4) #define BIOS_CNTL 0x4E -#define GPIO_BASE 0x58 /* LPC GPIO Base Address Register */ -#define GPIO_CNTL 0x5C /* LPC GPIO Control Register */ +#define GPIO_BASE 0x58 /* GPIO Base Address Register */ +#define GPIO_CNTL 0x5C /* GPIO Control Register */ +#define GPIO_EN (1 << 4) #define PIRQA_ROUT 0x60 #define PIRQB_ROUT 0x61 @@ -51,10 +59,10 @@ extern void i82801bx_enable(device_t dev); #define FUNC_DIS 0xF2 -#define COM_DEC 0xE0 /* LPC I/F Communication Port Decode Ranges (ICH0-ICH5) */ -#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register (ICH6-ICH9) */ -#define LPC_EN_ICH0_5 0xE6 /* LPC IF Enables Register (ICH0-ICH5) */ -#define LPC_EN_ICH6_9 0x82 /* LPC IF Enables Register (ICH6-ICH9) */ +#define COM_DEC 0xE0 /* LPC I/F Comm. Port Decode Ranges */ +#define LPC_EN 0xE6 /* LPC IF Enables Register */ + +// TODO: FDC_DEC etc #define SBUS_NUM 0x19 #define SUB_BUS_NUM 0x1A @@ -67,8 +75,6 @@ extern void i82801bx_enable(device_t dev); #define MTT 0x70 #define PCI_MAST_STS 0x82 -#define GPIO_BASE_ADDR 0x00000500 /* GPIO Base Address Register */ - #define TCOBASE 0x60 /* TCO Base Address Register */ #define TCO1_CNT 0x08 /* TCO1 Control Register */ @@ -77,14 +83,14 @@ extern void i82801bx_enable(device_t dev); #define RTC_POWER_FAILED (1 << 1) #define SLEEP_AFTER_POWER_FAIL (1 << 0) -/* PCI Configuration Space (D31:F1) */ +/* IDE Timing registers (IDE_TIM) */ #define IDE_TIM_PRI 0x40 /* IDE timings, primary */ #define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ /* IDE_TIM bits */ #define IDE_DECODE_ENABLE (1 << 15) -/* PCI Configuration Space (D31:F3) */ +/* SMbus */ #define SMB_BASE 0x20 #define HOSTC 0x40 @@ -93,13 +99,7 @@ extern void i82801bx_enable(device_t dev); #define SMB_SMI_EN (1 << 1) #define HST_EN (1 << 0) -/* SMBus I/O bits. - * TODO: Does it matter where we put the SMBus IO base, as long as we keep - * consistent and don't interfere with anything else? - */ -/* #define SMBUS_IO_BASE 0x1000 */ -#define SMBUS_IO_BASE 0x0f00 - +/* SMBus I/O registers. */ #define SMBHSTSTAT 0x0 #define SMBHSTCTL 0x2 #define SMBHSTCMD 0x3 @@ -114,8 +114,5 @@ extern void i82801bx_enable(device_t dev); #define SMBUS_TIMEOUT (10 * 1000 * 100) -/* HPET, if present */ -#define HPET_ADDR 0xfed00000 - #endif /* SOUTHBRIDGE_INTEL_I82801BX_I82801BX_H */ diff --git a/src/southbridge/intel/i82801bx/i82801bx_ac97.c b/src/southbridge/intel/i82801bx/i82801bx_ac97.c index 2966d204e4..5e2acd3310 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_ac97.c +++ b/src/southbridge/intel/i82801bx/i82801bx_ac97.c @@ -19,8 +19,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* This code should work for all ICH* southbridges with AC97 audio/modem. */ - #include #include #include @@ -36,32 +34,6 @@ static struct device_operations ac97_ops = { .enable = i82801bx_enable, }; -/* 82801AA (ICH) */ -static const struct pci_driver i82801aa_ac97_audio __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801AA_AC97_AUDIO, -}; - -static const struct pci_driver i82801aa_ac97_modem __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801AA_AC97_MODEM, -}; - -/* 82801AB (ICH0) */ -static const struct pci_driver i82801ab_ac97_audio __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801AB_AC97_AUDIO, -}; - -static const struct pci_driver i82801ab_ac97_modem __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801AB_AC97_MODEM, -}; - /* 82801BA/BAM (ICH2/ICH2-M) */ static const struct pci_driver i82801ba_ac97_audio __pci_driver = { .ops = &ac97_ops, @@ -74,55 +46,3 @@ static const struct pci_driver i82801ba_ac97_modem __pci_driver = { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801BA_AC97_MODEM, }; - -/* 82801CA/CAM (ICH3-S/ICH3-M) */ -static const struct pci_driver i82801ca_ac97_audio __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801CA_AC97_AUDIO, -}; - -static const struct pci_driver i82801ca_ac97_modem __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801CA_AC97_MODEM, -}; - -/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ -static const struct pci_driver i82801db_ac97_audio __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DB_AC97_AUDIO, -}; - -static const struct pci_driver i82801db_ac97_modem __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DB_AC97_MODEM, -}; - -/* 82801EB/ER (ICH5/ICH5R) */ -static const struct pci_driver i82801eb_ac97_audio __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801EB_AC97_AUDIO, -}; - -static const struct pci_driver i82801eb_ac97_modem __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801EB_AC97_MODEM, -}; - -/* 82801FB/FR/FW/FRW/FBM (ICH6/ICH6R/ICH6W/ICH6RW/ICH6-M) */ -static const struct pci_driver i82801fb_ac97_audio __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801FB_AC97_AUDIO, -}; - -static const struct pci_driver i82801fb_ac97_modem __pci_driver = { - .ops = &ac97_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801FB_AC97_MODEM, -}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c b/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c index 569aaaca50..98ce799516 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c +++ b/src/southbridge/intel/i82801bx/i82801bx_early_smbus.c @@ -29,19 +29,9 @@ static void enable_smbus(void) device_t dev; uint16_t device_id; - /* Set the SMBus device statically. */ + /* Set the SMBus device statically (D31:F3). */ dev = PCI_DEV(0x0, 0x1f, 0x3); - /* Check to make sure we've got the right device. */ - device_id = pci_read_config16(dev, 0x2); - - /* Clear bits 7-4 (the only bits that vary between models). */ - device_id &= 0xff0f; - - if (device_id != 0x2403) { - die("Device not found, Corey probably screwed up!"); - } - /* Set SMBus I/O base. */ pci_write_config32(dev, SMB_BASE, SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); diff --git a/src/southbridge/intel/i82801bx/i82801bx_ide.c b/src/southbridge/intel/i82801bx/i82801bx_ide.c index 9d287b2b9b..413984b5f4 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_ide.c +++ b/src/southbridge/intel/i82801bx/i82801bx_ide.c @@ -31,34 +31,24 @@ typedef struct southbridge_intel_i82801bx_config config_t; static void ide_init(struct device *dev) { - /* Get the chip configuration */ - config_t *config = dev->chip_info; + u16 reg16; + config_t *conf = dev->chip_info; - /* TODO: Needs to be tested for compatibility with ICH5(R). */ - /* Enable IDE devices so the Linux IDE driver will work. */ - uint16_t ideTimingConfig; + reg16 = pci_read_config16(dev, IDE_TIM_PRI); + reg16 &= ~IDE_DECODE_ENABLE; + if (!conf || conf->ide0_enable) + reg16 |= IDE_DECODE_ENABLE; + printk(BIOS_DEBUG, "IDE: %s IDE interface: %s\n", "Primary", + conf->ide0_enable ? "on" : "off"); + pci_write_config16(dev, IDE_TIM_PRI, reg16); - ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI); - ideTimingConfig &= ~IDE_DECODE_ENABLE; - if (!config || config->ide0_enable) { - /* Enable primary IDE interface. */ - ideTimingConfig |= IDE_DECODE_ENABLE; - printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); - } else { - printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); - } - pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); - - ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC); - ideTimingConfig &= ~IDE_DECODE_ENABLE; - if (!config || config->ide1_enable) { - /* Enable secondary IDE interface. */ - ideTimingConfig |= IDE_DECODE_ENABLE; - printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); - } else { - printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); - } - pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); + reg16 = pci_read_config16(dev, IDE_TIM_SEC); + reg16 &= ~IDE_DECODE_ENABLE; + if (!conf || conf->ide1_enable) + reg16 |= IDE_DECODE_ENABLE; + printk(BIOS_DEBUG, "IDE: %s IDE interface: %s\n", "Secondary", + conf->ide0_enable ? "on" : "off"); + pci_write_config16(dev, IDE_TIM_SEC, reg16); } static struct device_operations ide_ops = { @@ -70,51 +60,9 @@ static struct device_operations ide_ops = { .enable = i82801bx_enable, }; -/* 82801AA */ -static const struct pci_driver i82801aa_ide __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x2411, -}; - -/* 82801AB */ -static const struct pci_driver i82801ab_ide __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x2421, -}; - -/* 82801BA */ +/* 82801BA/BAM (ICH2/ICH2-M) */ static const struct pci_driver i82801ba_ide __pci_driver = { .ops = &ide_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = 0x244b, }; - -/* 82801CA */ -static const struct pci_driver i82801ca_ide __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x248b, -}; - -/* 82801DB */ -static const struct pci_driver i82801db_ide __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24cb, -}; - -/* 82801DBM */ -static const struct pci_driver i82801dbm_ide __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24ca, -}; - -/* 82801EB & 82801ER */ -static const struct pci_driver i82801ex_ide __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24db, -}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_lpc.c b/src/southbridge/intel/i82801bx/i82801bx_lpc.c index 8b5e4af21a..9432d2e788 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_lpc.c +++ b/src/southbridge/intel/i82801bx/i82801bx_lpc.c @@ -21,8 +21,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* From 82801DBM, needs to be fixed to support everything the 82801ER does. */ - #include #include #include @@ -53,8 +51,10 @@ typedef struct southbridge_intel_i82801bx_config config_t; * 0x0D - 1101 = Reserved * 0x0E - 1110 = IRQ14 * 0x0F - 1111 = IRQ15 - * PIRQ[n]_ROUT[7] - PIRQ Routing Control - * 0x80 - The PIRQ is not routed. + * + * PIRQ[n]_ROUT[7] - Interrupt Routing Enable (IRQEN) + * 0 - The PIRQ is routed to the ISA-compatible interrupt specified above. + * 1 - The PIRQ is not routed to the 8259. */ #define PIRQA 0x03 @@ -71,7 +71,6 @@ typedef struct southbridge_intel_i82801bx_config config_t; * Use the defined IRQ values above or set mainboard * specific IRQ values in your mainboards Config.lb. */ - static void i82801bx_enable_apic(struct device *dev) { uint32_t reg32; @@ -81,14 +80,14 @@ static void i82801bx_enable_apic(struct device *dev) /* Set ACPI base address (I/O space). */ pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1)); - /* Enable ACPI I/O and power management. */ - pci_write_config8(dev, ACPI_CNTL, 0x10); + /* Enable ACPI I/O range decode and ACPI power management. */ + pci_write_config8(dev, ACPI_CNTL, ACPI_EN); reg32 = pci_read_config32(dev, GEN_CNTL); - reg32 |= (3 << 7); /* Enable IOAPIC */ - reg32 |= (1 << 13); /* Coprocessor error enable */ - reg32 |= (1 << 1); /* Delayed transaction enable */ - reg32 |= (1 << 2); /* DMA collection buffer enable */ + reg32 |= (1 << 13); /* Coprocessor error enable (COPR_ERR_EN) */ + reg32 |= (3 << 7); /* IOAPIC enable (APIC_EN) */ + reg32 |= (1 << 2); /* DMA collection buffer enable (DCB_EN) */ + reg32 |= (1 << 1); /* Delayed transaction enable (DTE) */ pci_write_config32(dev, GEN_CNTL, reg32); printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); @@ -118,60 +117,33 @@ static void i82801bx_enable_serial_irqs(struct device *dev) static void i82801bx_pirq_init(device_t dev, uint16_t ich_model) { - /* Get the chip configuration */ + u8 reg8; config_t *config = dev->chip_info; - if (config->pirqa_routing) { - pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); - } else { - pci_write_config8(dev, PIRQA_ROUT, PIRQA); - } + reg8 = (config->pirqa_routing) ? config->pirqa_routing : PIRQA; + pci_write_config8(dev, PIRQA_ROUT, reg8); - if (config->pirqb_routing) { - pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); - } else { - pci_write_config8(dev, PIRQB_ROUT, PIRQB); - } + reg8 = (config->pirqb_routing) ? config->pirqb_routing : PIRQB; + pci_write_config8(dev, PIRQB_ROUT, reg8); - if (config->pirqc_routing) { - pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); - } else { - pci_write_config8(dev, PIRQC_ROUT, PIRQC); - } + reg8 = (config->pirqc_routing) ? config->pirqc_routing : PIRQC; + pci_write_config8(dev, PIRQC_ROUT, reg8); - if (config->pirqd_routing) { - pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); - } else { - pci_write_config8(dev, PIRQD_ROUT, PIRQD); - } + reg8 = (config->pirqd_routing) ? config->pirqd_routing : PIRQD; + pci_write_config8(dev, PIRQD_ROUT, reg8); - /* Route PIRQE - PIRQH (for ICH2-ICH9). */ - if (ich_model >= 0x2440) { - - if (config->pirqe_routing) { - pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); - } else { - pci_write_config8(dev, PIRQE_ROUT, PIRQE); - } - - if (config->pirqf_routing) { - pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); - } else { - pci_write_config8(dev, PIRQF_ROUT, PIRQF); - } - - if (config->pirqg_routing) { - pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); - } else { - pci_write_config8(dev, PIRQG_ROUT, PIRQG); - } - - if (config->pirqh_routing) { - pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); - } else { - pci_write_config8(dev, PIRQH_ROUT, PIRQH); - } - } + + reg8 = (config->pirqe_routing) ? config->pirqe_routing : PIRQE; + pci_write_config8(dev, PIRQE_ROUT, reg8); + + reg8 = (config->pirqf_routing) ? config->pirqf_routing : PIRQF; + pci_write_config8(dev, PIRQF_ROUT, reg8); + + reg8 = (config->pirqg_routing) ? config->pirqg_routing : PIRQG; + pci_write_config8(dev, PIRQG_ROUT, reg8); + + reg8 = (config->pirqh_routing) ? config->pirqh_routing : PIRQH; + pci_write_config8(dev, PIRQH_ROUT, reg8); } static void i82801bx_power_options(device_t dev) @@ -208,7 +180,7 @@ static void gpio_init(device_t dev) { /* Set the value for GPIO base address register and enable GPIO. */ pci_write_config32(dev, GPIO_BASE, (GPIO_BASE_ADDR | 1)); - pci_write_config8(dev, GPIO_CNTL, 0x10); + pci_write_config8(dev, GPIO_CNTL, GPIO_EN); } static void i82801bx_rtc_init(struct device *dev) @@ -252,15 +224,9 @@ static void i82801bx_lpc_decode_en(device_t dev, uint16_t ich_model) * LPT decode defaults to 0x378-0x37F and 0x778-0x77F. * Floppy decode defaults to 0x3F0-0x3F5, 0x3F7. * We also need to set the value for LPC I/F Enables Register. - * Note: ICH-ICH5 registers differ from ICH6-ICH9. */ - if (ich_model <= 0x24D0) { - pci_write_config8(dev, COM_DEC, 0x10); - pci_write_config16(dev, LPC_EN_ICH0_5, 0x300F); - } else if (ich_model >= 0x2640) { - pci_write_config8(dev, LPC_IO_DEC, 0x10); - pci_write_config16(dev, LPC_EN_ICH6_9, 0x300F); - } + pci_write_config8(dev, COM_DEC, 0x10); + pci_write_config16(dev, LPC_EN, 0x300F); } static void lpc_init(struct device *dev) @@ -332,45 +298,9 @@ static struct device_operations lpc_ops = { .enable = i82801bx_enable, }; -static const struct pci_driver i82801aa_lpc __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x2410, -}; - -static const struct pci_driver i82801ab_lpc __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x2420, -}; - +/* 82801BA/BAM (ICH2/ICH2-M) */ static const struct pci_driver i82801ba_lpc __pci_driver = { .ops = &lpc_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = 0x2440, }; - -static const struct pci_driver i82801ca_lpc __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x2480, -}; - -static const struct pci_driver i82801db_lpc __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24c0, -}; - -static const struct pci_driver i82801dbm_lpc __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24cc, -}; - -/* 82801EB and 82801ER */ -static const struct pci_driver i82801ex_lpc __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24d0, -}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_nic.c b/src/southbridge/intel/i82801bx/i82801bx_nic.c index 3728d28bd7..b843aca328 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_nic.c +++ b/src/southbridge/intel/i82801bx/i82801bx_nic.c @@ -18,8 +18,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* This code should work for all ICH* southbridges with a NIC. */ - #include #include #include @@ -33,46 +31,9 @@ static struct device_operations nic_ops = { .scan_bus = 0, }; -/* Note: There's no NIC on 82801AA/AB (ICH/ICH0). */ - -/* 82801BA/BAM/CA/CAM (ICH2/ICH2-M/ICH3-S/ICH3-M) */ +/* 82801BA/BAM (ICH2/ICH2-M) */ static const struct pci_driver i82801ba_nic __pci_driver = { .ops = &nic_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801BA_LAN, }; - -/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ -static const struct pci_driver i82801db_nic __pci_driver = { - .ops = &nic_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DB_LAN, -}; - -/* 82801EB/ER (ICH5/ICH5R) */ -static const struct pci_driver i82801eb_nic __pci_driver = { - .ops = &nic_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801EB_LAN, -}; - -/* 82801FB/FR/FW/FRW/FBM (ICH6/ICH6R/ICH6W/ICH6RW/ICH6-M) */ -static const struct pci_driver i82801fb_nic __pci_driver = { - .ops = &nic_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801FB_LAN, -}; - -/* 82801E (C-ICH) */ -static const struct pci_driver i82801e_nic1 __pci_driver = { - .ops = &nic_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801E_LAN1, -}; - -static const struct pci_driver i82801e_nic2 __pci_driver = { - .ops = &nic_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801E_LAN2, -}; - diff --git a/src/southbridge/intel/i82801bx/i82801bx_pci.c b/src/southbridge/intel/i82801bx/i82801bx_pci.c index 1f01e5dc46..fc5b83e8c4 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_pci.c +++ b/src/southbridge/intel/i82801bx/i82801bx_pci.c @@ -26,16 +26,16 @@ static void pci_init(struct device *dev) { - uint16_t reg16; + u16 reg16; /* Clear system errors */ - reg16 = pci_read_config16(dev, 0x06); + reg16 = pci_read_config16(dev, PCI_STATUS); reg16 |= 0xf900; /* Clear possible errors */ - pci_write_config16(dev, 0x06, reg16); + pci_write_config16(dev, PCI_STATUS, reg16); - reg16 = pci_read_config16(dev, 0x1e); + reg16 = pci_read_config16(dev, SECSTS); reg16 |= 0xf800; /* Clear possible errors */ - pci_write_config16(dev, 0x1e, reg16); + pci_write_config16(dev, SECSTS, reg16); } static struct device_operations pci_ops = { @@ -46,27 +46,9 @@ static struct device_operations pci_ops = { .scan_bus = pci_scan_bridge, }; -static const struct pci_driver i82801aa_pci __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x2418, -}; - -static const struct pci_driver i82801ab_pci __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x2428, -}; - -/* 82801BA, 82801CA, 82801DB, 82801EB, and 82801ER */ +/* 82801BA/BAM (ICH2/ICH2-M) */ static const struct pci_driver i82801misc_pci __pci_driver = { .ops = &pci_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = 0x244e, }; - -static const struct pci_driver i82801dbm_pci __pci_driver = { - .ops = &pci_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x2448, -}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_sata.c b/src/southbridge/intel/i82801bx/i82801bx_sata.c deleted file mode 100644 index 19a892ab1b..0000000000 --- a/src/southbridge/intel/i82801bx/i82801bx_sata.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2005 Tyan Computer - * (Written by Yinghai Lu for Tyan Computer) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include "i82801bx.h" - -/* TODO: Set dynamically, if the user only wants one SATA channel or none - * at all. - */ -static void sata_init(struct device *dev) -{ - /* SATA configuration */ - pci_write_config8(dev, 0x04, 0x07); - pci_write_config8(dev, 0x09, 0x8f); - - /* Set timmings */ - pci_write_config16(dev, 0x40, 0x0a307); - pci_write_config16(dev, 0x42, 0x0a307); - - /* Sync DMA */ - pci_write_config16(dev, 0x48, 0x000f); - pci_write_config16(dev, 0x4a, 0x1111); - - /* 66 MHz */ - pci_write_config16(dev, 0x54, 0xf00f); - - /* Combine IDE - SATA configuration */ - pci_write_config8(dev, 0x90, 0x0); - - /* Port 0 & 1 enable */ - pci_write_config8(dev, 0x92, 0x33); - - /* Initialize SATA. */ - pci_write_config16(dev, 0xa0, 0x0018); - pci_write_config32(dev, 0xa4, 0x00000264); - pci_write_config16(dev, 0xa0, 0x0040); - pci_write_config32(dev, 0xa4, 0x00220043); -} - -static struct device_operations sata_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = sata_init, - .scan_bus = 0, - .enable = i82801bx_enable, -}; - -/* 82801EB */ -static const struct pci_driver i82801eb_sata_driver __pci_driver = { - .ops = &sata_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24d1, -}; - -/* 82801ER */ -static const struct pci_driver i82801er_sata_driver __pci_driver = { - .ops = &sata_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24df, -}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_smbus.c b/src/southbridge/intel/i82801bx/i82801bx_smbus.c index 671d73445c..db27b094c3 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_smbus.c +++ b/src/southbridge/intel/i82801bx/i82801bx_smbus.c @@ -53,58 +53,9 @@ static const struct device_operations smbus_ops = { .ops_smbus_bus = &lops_smbus_bus, }; -/* 82801AA (ICH) */ -static const struct pci_driver i82801aa_smb __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801AA_SMB, -}; - -/* 82801AB (ICH0) */ -static const struct pci_driver i82801ab_smb __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801AB_SMB, -}; - /* 82801BA/BAM (ICH2/ICH2-M) */ static const struct pci_driver i82801ba_smb __pci_driver = { .ops = &smbus_ops, .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801BA_SMB, }; - -/* 82801CA/CAM (ICH3-S/ICH3-M) */ -static const struct pci_driver i82801ca_smb __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801CA_SMB, -}; - -/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ -static const struct pci_driver i82801db_smb __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DB_SMB, -}; - -/* 82801EB/ER (ICH5/ICH5R) */ -static const struct pci_driver i82801eb_smb __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801EB_SMB, -}; - -/* 82801FB/FR/FW/FRW/FBM (ICH6/ICH6R/ICH6W/ICH6RW/ICH6-M) */ -static const struct pci_driver i82801fb_smb __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801FB_SMB, -}; - -/* 82801E (C-ICH) */ -static const struct pci_driver i82801e_smb __pci_driver = { - .ops = &smbus_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801E_SMB, -}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_usb.c b/src/southbridge/intel/i82801bx/i82801bx_usb.c index 721f5bf155..f90f6a6906 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_usb.c +++ b/src/southbridge/intel/i82801bx/i82801bx_usb.c @@ -18,8 +18,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* This code should work for all ICH* southbridges with USB. */ - #include #include #include @@ -40,20 +38,6 @@ static struct device_operations usb_ops = { .enable = i82801bx_enable, }; -/* 82801AA (ICH) */ -static const struct pci_driver i82801aa_usb1 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801AA_USB, -}; - -/* 82801AB (ICH0) */ -static const struct pci_driver i82801ab_usb1 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801AB_USB, -}; - /* 82801BA/BAM (ICH2/ICH2-M) */ static const struct pci_driver i82801ba_usb1 __pci_driver = { .ops = &usb_ops, @@ -66,98 +50,3 @@ static const struct pci_driver i82801ba_usb2 __pci_driver = { .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_82801BA_USB2, }; - -/* 82801CA/CAM (ICH3-S/ICH3-M) */ -static const struct pci_driver i82801ca_usb1 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801CA_USB1, -}; - -static const struct pci_driver i82801ca_usb2 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801CA_USB2, -}; - -static const struct pci_driver i82801ca_usb3 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801CA_USB3, -}; - -/* 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) */ -static const struct pci_driver i82801db_usb1 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DB_USB1, -}; - -static const struct pci_driver i82801db_usb2 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DB_USB2, -}; - -static const struct pci_driver i82801db_usb3 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DB_USB3, -}; - -/* 82801EB/ER (ICH5/ICH5R) */ -static const struct pci_driver i82801eb_usb1 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801EB_USB1, -}; - -static const struct pci_driver i82801eb_usb2 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801EB_USB2, -}; - -static const struct pci_driver i82801eb_usb3 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801EB_USB3, -}; - -static const struct pci_driver i82801eb_usb4 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801EB_USB4, -}; - -/* 82801FB/FR/FW/FRW/FBM (ICH6/ICH6R/ICH6W/ICH6RW/ICH6-M) */ -static const struct pci_driver i82801fb_usb1 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801FB_USB1, -}; - -static const struct pci_driver i82801fb_usb2 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801FB_USB2, -}; - -static const struct pci_driver i82801fb_usb3 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801FB_USB3, -}; - -static const struct pci_driver i82801fb_usb4 __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801FB_USB4, -}; - -/* 82801E (C-ICH) */ -static const struct pci_driver i82801e_usb __pci_driver = { - .ops = &usb_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801E_USB, -}; diff --git a/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c b/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c deleted file mode 100644 index 29034444b4..0000000000 --- a/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2005 Tyan Computer - * (Written by Yinghai Lu for Tyan Computer> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include "i82801bx.h" - -static void usb_ehci_init(struct device *dev) -{ - /* TODO: Is any special init really needed? */ - uint32_t cmd; - - printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); - cmd = pci_read_config32(dev, PCI_COMMAND); - pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - - printk(BIOS_DEBUG, "done.\n"); -} - -static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, - unsigned device) -{ - uint8_t access_cntl; - - access_cntl = pci_read_config8(dev, 0x80); - - /* Enable writes to protected registers. */ - pci_write_config8(dev, 0x80, access_cntl | 1); - - /* Write the subsystem vendor and device ID. */ - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - - /* Restore protection. */ - pci_write_config8(dev, 0x80, access_cntl); -} - -static struct pci_operations lops_pci = { - .set_subsystem = &usb_ehci_set_subsystem, -}; - -static struct device_operations usb_ehci_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = usb_ehci_init, - .scan_bus = 0, - .enable = i82801bx_enable, - .ops_pci = &lops_pci, -}; - -/* 82801DB and 82801DBM */ -static const struct pci_driver i82801db_usb_ehci __pci_driver = { - .ops = &usb_ehci_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24cd, -}; - -/* 82801EB and 82801ER */ -static const struct pci_driver i82801ex_usb_ehci __pci_driver = { - .ops = &usb_ehci_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x24dd, -}; -- cgit v1.2.3