From 05f26fcb571340b17beaca16939a025a9c0b4cdd Mon Sep 17 00:00:00 2001 From: Eric Biederman Date: Wed, 11 Jun 2003 21:55:00 +0000 Subject: - Factoring of auto.c - Implementation of fallback/normal support for the amd solo board - Minor bugfix in romcc git-svn-id: svn://svn.coreboot.org/coreboot/trunk@867 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/arch/i386/include/arch/romcc_io.h | 16 + src/arch/i386/lib/console.c | 9 + src/mainboard/amd/solo/auto.c | 1670 +-------------------- src/mainboard/amd/solo/failover.c | 26 + src/northbridge/amd/amdk8/coherent_ht.c | 591 ++++++++ src/northbridge/amd/amdk8/early_ht.c | 49 + src/northbridge/amd/amdk8/raminit.c | 792 ++++++++++ src/pc80/mc146818rtc_early.c | 84 ++ src/southbridge/amd/amd8111/amd8111_early_smbus.c | 108 ++ src/southbridge/amd/amd8111/amd8111_enable_rom.c | 18 + util/romcc/Makefile | 5 + util/romcc/romcc.c | 63 +- util/romcc/tests/simple_test31.c | 16 + 13 files changed, 1820 insertions(+), 1627 deletions(-) create mode 100644 src/mainboard/amd/solo/failover.c create mode 100644 src/northbridge/amd/amdk8/coherent_ht.c create mode 100644 src/northbridge/amd/amdk8/early_ht.c create mode 100644 src/northbridge/amd/amdk8/raminit.c create mode 100644 src/pc80/mc146818rtc_early.c create mode 100644 src/southbridge/amd/amd8111/amd8111_early_smbus.c create mode 100644 src/southbridge/amd/amd8111/amd8111_enable_rom.c create mode 100644 util/romcc/tests/simple_test31.c diff --git a/src/arch/i386/include/arch/romcc_io.h b/src/arch/i386/include/arch/romcc_io.h index 66e6dc07cd..8366a4d529 100644 --- a/src/arch/i386/include/arch/romcc_io.h +++ b/src/arch/i386/include/arch/romcc_io.h @@ -53,6 +53,9 @@ static void wrmsr(unsigned long index, msr_t msr) (((FN) & 0x07) << 8) | \ ((WHERE) & 0xFF)) +#define PCI_ID(VENDOR_ID, DEVICE_ID) \ + ((((DEVICE_ID) & 0xFFFF) << 16) | ((VENDOR_ID) & 0xFFFF)) + static unsigned char pci_read_config8(unsigned addr) { outl(0x80000000 | (addr & ~3), 0xCF8); @@ -88,3 +91,16 @@ static void pci_write_config32(unsigned addr, unsigned int value) outl(0x80000000 | (addr & ~3), 0xCF8); outl(value, 0xCFC); } + +static unsigned pci_locate_device(unsigned pci_id, unsigned addr) +{ + addr &= ~0xff; + for(; addr <= PCI_ADDR(255, 31, 7, 0); addr += PCI_ADDR(0,0,1,0)) { + unsigned int id; + id = pci_read_config32(addr); + if (id == pci_id) { + return addr; + } + } + return ~0U; +} diff --git a/src/arch/i386/lib/console.c b/src/arch/i386/lib/console.c index 83502eafd9..f3594e9786 100644 --- a/src/arch/i386/lib/console.c +++ b/src/arch/i386/lib/console.c @@ -136,3 +136,12 @@ static void console_init(void) " starting...\r\n"; print_info(console_test); } + + +static void die(const char *str) +{ + print_emerg(str); + do { + hlt(); + } while(1); +} diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c index c2d5b88190..906c3f9137 100644 --- a/src/mainboard/amd/solo/auto.c +++ b/src/mainboard/amd/solo/auto.c @@ -5,807 +5,10 @@ #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" - -static void die(const char *str) -{ - print_emerg(str); - do { - hlt(); - } while(1); -} - -#define MEMORY_512MB 0 /* SuSE Solo configuration */ -#define MEMORY_1024MB 1 /* LNXI Solo configuration */ - -static void sdram_set_registers(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000, -#endif - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003, -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000, -#endif - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03, -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003, -#endif - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - /* DRAM CS Base Address i Registers - * F2:0x40 i = 0 - * F2:0x44 i = 1 - * F2:0x48 i = 2 - * F2:0x4C i = 3 - * F2:0x50 i = 4 - * F2:0x54 i = 5 - * F2:0x58 i = 6 - * F2:0x5C i = 7 - * [ 0: 0] Chip-Select Bank Enable - * 0 = Bank Disabled - * 1 = Bank Enabled - * [ 8: 1] Reserved - * [15: 9] Base Address (19-13) - * An optimization used when all DIMM are the same size... - * [20:16] Reserved - * [31:21] Base Address (35-25) - * This field defines the top 11 addresses bit of a 40-bit - * address that define the memory address space. These - * bits decode 32-MByte blocks of memory. - */ - PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001, -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001, - PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001, - PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001, - PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001, - PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001, -#endif - PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000, - /* DRAM CS Mask Address i Registers - * F2:0x60 i = 0 - * F2:0x64 i = 1 - * F2:0x68 i = 2 - * F2:0x6C i = 3 - * F2:0x70 i = 4 - * F2:0x74 i = 5 - * F2:0x78 i = 6 - * F2:0x7C i = 7 - * Select bits to exclude from comparison with the DRAM Base address register. - * [ 8: 0] Reserved - * [15: 9] Address Mask (19-13) - * Address to be excluded from the optimized case - * [20:16] Reserved - * [29:21] Address Mask (33-25) - * The bits with an address mask of 1 are excluded from address comparison - * [31:30] Reserved - * - */ -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00, - PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00, - PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00, - PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00, - PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00, - PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00, - PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00, -#endif - PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000, - PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000, - /* DRAM Bank Address Mapping Register - * F2:0x80 - * Specify the memory module size - * [ 2: 0] CS1/0 - * [ 6: 4] CS3/2 - * [10: 8] CS5/4 - * [14:12] CS7/6 - * 000 = 32Mbyte (Rows = 12 & Col = 8) - * 001 = 64Mbyte (Rows = 12 & Col = 9) - * 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10) - * 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11) - * 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10) - * 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12) - * 110 = 2Gbyte (Rows = 14 & Col = 12) - * 111 = reserved - * [ 3: 3] Reserved - * [ 7: 7] Reserved - * [11:11] Reserved - * [31:15] - */ -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022, -#endif - /* DRAM Timing Low Register - * F2:0x88 - * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid) - * 000 = reserved - * 001 = CL 2 - * 010 = CL 3 - * 011 = reserved - * 100 = reserved - * 101 = CL 2.5 - * 110 = reserved - * 111 = reserved - * [ 3: 3] Reserved - * [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh) - * 0000 = 7 bus clocks - * 0001 = 8 bus clocks - * ... - * 1110 = 21 bus clocks - * 1111 = 22 bus clocks - * [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh) - * 0000 = 9 bus clocks - * 0010 = 10 bus clocks - * .... - * 1110 = 23 bus clocks - * 1111 = 24 bus clocks - * [14:12] Trcd (Ras#-active to Case#-read/write Delay) - * 000 = reserved - * 001 = reserved - * 010 = 2 bus clocks - * 011 = 3 bus clocks - * 100 = 4 bus clocks - * 101 = 5 bus clocks - * 110 = 6 bus clocks - * 111 = reserved - * [15:15] Reserved - * [18:16] Trrd (Ras# to Ras# Delay) - * 000 = reserved - * 001 = reserved - * 010 = 2 bus clocks - * 011 = 3 bus clocks - * 100 = 4 bus clocks - * 101 = reserved - * 110 = reserved - * 111 = reserved - * [19:19] Reserved - * [23:20] Tras (Minmum Ras# Active Time) - * 0000 to 0100 = reserved - * 0101 = 5 bus clocks - * ... - * 1111 = 15 bus clocks - * [26:24] Trp (Row Precharge Time) - * 000 = reserved - * 001 = reserved - * 010 = 2 bus clocks - * 011 = 3 bus clocks - * 100 = 4 bus clocks - * 101 = 5 bus clocks - * 110 = 6 bus clocks - * 111 = reserved - * [27:27] Reserved - * [28:28] Twr (Write Recovery Time) - * 0 = 2 bus clocks - * 1 = 3 bus clocks - * [31:29] Reserved - */ - PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125, - /* DRAM Timing High Register - * F2:0x8C - * [ 0: 0] Twtr (Write to Read Delay) - * 0 = 1 bus Clocks - * 1 = 2 bus Clocks - * [ 3: 1] Reserved - * [ 6: 4] Trwf (Read to Write Delay) - * 000 = 1 bus clocks - * 001 = 2 bus clocks - * 010 = 3 bus clocks - * 011 = 4 bus clocks - * 100 = 5 bus clocks - * 101 = 6 bus clocks - * 110 = reserved - * 111 = reserved - * [ 7: 7] Reserved - * [12: 8] Tref (Refresh Rate) - * 00000 = 100Mhz 4K rows - * 00001 = 133Mhz 4K rows - * 00010 = 166Mhz 4K rows - * 01000 = 100Mhz 8K/16K rows - * 01001 = 133Mhz 8K/16K rows - * 01010 = 166Mhz 8K/16K rows - * [19:13] Reserved - * [22:20] Twcl (Write CAS Latency) - * 000 = 1 Mem clock after CAS# (Unbuffered Dimms) - * 001 = 2 Mem clocks after CAS# (Registered Dimms) - * [31:23] Reserved - */ -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130, -#endif - - /* DRAM Config Low Register - * F2:0x90 - * [ 0: 0] DLL Disable - * 0 = Enabled - * 1 = Disabled - * [ 1: 1] D_DRV - * 0 = Normal Drive - * 1 = Weak Drive - * [ 2: 2] QFC_EN - * 0 = Disabled - * 1 = Enabled - * [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully) - * 0 = Enable DQS input filter - * 1 = Disable DQS input filtering - * [ 7: 4] Reserved - * [ 8: 8] DRAM_Init - * 0 = Initialization done or not yet started. - * 1 = Initiate DRAM intialization sequence - * [ 9: 9] SO-Dimm Enable - * 0 = Do nothing - * 1 = SO-Dimms present - * [10:10] DramEnable - * 0 = DRAM not enabled - * 1 = DRAM initialized and enabled - * [11:11] Memory Clear Status - * 0 = Memory Clear function has not completed - * 1 = Memory Clear function has completed - * [12:12] Exit Self-Refresh - * 0 = Exit from self-refresh done or not yet started - * 1 = DRAM exiting from self refresh - * [13:13] Self-Refresh Status - * 0 = Normal Operation - * 1 = Self-refresh mode active - * [15:14] Read/Write Queue Bypass Count - * 00 = 2 - * 01 = 4 - * 10 = 8 - * 11 = 16 - * [16:16] 128-bit/64-Bit - * 0 = 64bit Interface to DRAM - * 1 = 128bit Interface to DRAM - * [17:17] DIMM ECC Enable - * 0 = Some DIMMs do not have ECC - * 1 = ALL DIMMS have ECC bits - * [18:18] UnBuffered DIMMs - * 0 = Buffered DIMMS - * 1 = Unbuffered DIMMS - * [19:19] Enable 32-Byte Granularity - * 0 = Optimize for 64byte bursts - * 1 = Optimize for 32byte bursts - * [20:20] DIMM 0 is x4 - * [21:21] DIMM 1 is x4 - * [22:22] DIMM 2 is x4 - * [23:23] DIMM 3 is x4 - * 0 = DIMM is not x4 - * 1 = x4 DIMM present - * [24:24] Disable DRAM Receivers - * 0 = Receivers enabled - * 1 = Receivers disabled - * [27:25] Bypass Max - * 000 = Arbiters chois is always respected - * 001 = Oldest entry in DCQ can be bypassed 1 time - * 010 = Oldest entry in DCQ can be bypassed 2 times - * 011 = Oldest entry in DCQ can be bypassed 3 times - * 100 = Oldest entry in DCQ can be bypassed 4 times - * 101 = Oldest entry in DCQ can be bypassed 5 times - * 110 = Oldest entry in DCQ can be bypassed 6 times - * 111 = Oldest entry in DCQ can be bypassed 7 times - * [31:28] Reserved - */ - PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000, - (4 << 25)|(0 << 24)| - (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)| - (1 << 19)|(1 << 18)|(0 << 17)|(0 << 16)| - (2 << 14)|(0 << 13)|(0 << 12)| - (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)| - (0 << 3) |(0 << 1) |(0 << 0), - /* DRAM Config High Register - * F2:0x94 - * [ 0: 3] Maximum Asynchronous Latency - * 0000 = 0 ns - * ... - * 1111 = 15 ns - * [ 7: 4] Reserved - * [11: 8] Read Preamble - * 0000 = 2.0 ns - * 0001 = 2.5 ns - * 0010 = 3.0 ns - * 0011 = 3.5 ns - * 0100 = 4.0 ns - * 0101 = 4.5 ns - * 0110 = 5.0 ns - * 0111 = 5.5 ns - * 1000 = 6.0 ns - * 1001 = 6.5 ns - * 1010 = 7.0 ns - * 1011 = 7.5 ns - * 1100 = 8.0 ns - * 1101 = 8.5 ns - * 1110 = 9.0 ns - * 1111 = 9.5 ns - * [15:12] Reserved - * [18:16] Idle Cycle Limit - * 000 = 0 cycles - * 001 = 4 cycles - * 010 = 8 cycles - * 011 = 16 cycles - * 100 = 32 cycles - * 101 = 64 cycles - * 110 = 128 cycles - * 111 = 256 cycles - * [19:19] Dynamic Idle Cycle Center Enable - * 0 = Use Idle Cycle Limit - * 1 = Generate a dynamic Idle cycle limit - * [22:20] DRAM MEMCLK Frequency - * 000 = 100Mhz - * 001 = reserved - * 010 = 133Mhz - * 011 = reserved - * 100 = reserved - * 101 = 166Mhz - * 110 = reserved - * 111 = reserved - * [24:23] Reserved - * [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk) - * 0 = Disable MemClks - * 1 = Enable MemClks - * [26:26] Memory Clock 0 Enable - * 0 = Disabled - * 1 = Enabled - * [27:27] Memory Clock 1 Enable - * 0 = Disabled - * 1 = Enabled - * [28:28] Memory Clock 2 Enable - * 0 = Disabled - * 1 = Enabled - * [29:29] Memory Clock 3 Enable - * 0 = Disabled - * 1 = Enabled - * [31:30] Reserved - */ -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06, -#endif - /* DRAM Delay Line Register - * F2:0x98 - * Adjust the skew of the input DQS strobe relative to DATA - * [15: 0] Reserved - * [23:16] Delay Line Adjust - * Adjusts the DLL derived PDL delay by one or more delay stages - * in either the faster or slower direction. - * [24:24} Adjust Slower - * 0 = Do Nothing - * 1 = Adj is used to increase the PDL delay - * [25:25] Adjust Faster - * 0 = Do Nothing - * 1 = Adj is used to decrease the PDL delay - * [31:26] Reserved - */ - PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000, - /* DRAM Scrub Control Register - * F3:0x58 - * [ 4: 0] DRAM Scrube Rate - * [ 7: 5] reserved - * [12: 8] L2 Scrub Rate - * [15:13] reserved - * [20:16] Dcache Scrub - * [31:21] reserved - * Scrub Rates - * 00000 = Do not scrub - * 00001 = 40.00 ns - * 00010 = 80.00 ns - * 00011 = 160.00 ns - * 00100 = 320.00 ns - * 00101 = 640.00 ns - * 00110 = 1.28 us - * 00111 = 2.56 us - * 01000 = 5.12 us - * 01001 = 10.20 us - * 01011 = 41.00 us - * 01100 = 81.90 us - * 01101 = 163.80 us - * 01110 = 327.70 us - * 01111 = 655.40 us - * 10000 = 1.31 ms - * 10001 = 2.62 ms - * 10010 = 5.24 ms - * 10011 = 10.49 ms - * 10100 = 20.97 ms - * 10101 = 42.00 ms - * 10110 = 84.00 ms - * All Others = Reserved - */ - PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000, - /* DRAM Scrub Address Low Register - * F3:0x5C - * [ 0: 0] DRAM Scrubber Redirect Enable - * 0 = Do nothing - * 1 = Scrubber Corrects errors found in normal operation - * [ 5: 1] Reserved - * [31: 6] DRAM Scrub Address 31-6 - */ - PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000, - /* DRAM Scrub Address High Register - * F3:0x60 - * [ 7: 0] DRAM Scrubb Address 39-32 - * [31: 8] Reserved - */ - PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000, - }; - int i; - int max; - print_debug("setting up CPU0 northbridge registers\r\n"); - max = sizeof(register_values)/sizeof(register_values[0]); - for(i = 0; i < max; i += 3) { - unsigned long reg; -#if 0 - print_debug_hex32(register_values[i]); - print_debug(" <-"); - print_debug_hex32(register_values[i+2]); - print_debug("\r\n"); -#endif - reg = pci_read_config32(register_values[i]); - reg &= register_values[i+1]; - reg |= register_values[i+2]; - pci_write_config32(register_values[i], reg); - } - print_debug("done.\r\n"); -} - -#define DRAM_CONFIG_LOW 0x90 -#define DCL_DLL_Disable (1<<0) -#define DCL_D_DRV (1<<1) -#define DCL_QFC_EN (1<<2) -#define DCL_DisDqsHys (1<<3) -#define DCL_DramInit (1<<8) -#define DCL_DramEnable (1<<10) -#define DCL_MemClrStatus (1<<11) -#define DCL_DimmEcEn (1<<17) - -#define NODE_ID 0x60 -#define HT_INIT_CONTROL 0x6c - -#define HTIC_ColdR_Detect (1<<4) -#define HTIC_BIOSR_Detect (1<<5) -#define HTIC_INIT_Detect (1<<6) - -static void sdram_set_spd_registers(void) -{ - unsigned long dcl; - dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW)); - /* Until I know what is going on disable ECC support */ - dcl &= ~DCL_DimmEcEn; - pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl); -} - -#define TIMEOUT_LOOPS 300000 -static void sdram_enable(void) -{ - unsigned long dcl; - - /* Toggle DisDqsHys to get it working */ - dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW)); - print_debug("dcl: "); - print_debug_hex32(dcl); - print_debug("\r\n"); - dcl |= DCL_DisDqsHys; - pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl); - dcl &= ~DCL_DisDqsHys; - dcl &= ~DCL_DLL_Disable; - dcl &= ~DCL_D_DRV; - dcl &= ~DCL_QFC_EN; - dcl |= DCL_DramInit; - pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl); - - print_debug("Initializing memory: "); - int loops = 0; - do { - dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW)); - loops += 1; - if ((loops & 1023) == 0) { - print_debug("."); - } - } while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS)); - if (loops >= TIMEOUT_LOOPS) { - print_debug(" failed\r\n"); - } else { - print_debug(" done\r\n"); - } - -#if 0 - print_debug("Clearing memory: "); - loops = 0; - do { - dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW)); - loops += 1; - if ((loops & 1023) == 0) { - print_debug(" "); - print_debug_hex32(loops); - } - } while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS)); - if (loops >= TIMEOUT_LOOPS) { - print_debug("failed\r\n"); - } else { - print_debug("done\r\n"); - } -#endif -} - -static void sdram_first_normal_reference(void) {} -static void sdram_enable_refresh(void) {} -static void sdram_special_finishup(void) {} - +#include "northbridge/amd/amdk8/early_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" static int boot_cpu(void) @@ -853,641 +56,6 @@ static int cpu_init_detected(void) return cpu_init; } -static void setup_coherent_ht_domain(void) -{ - static const unsigned int register_values[] = { - /* Routing Table Node i - * F0:0x40 i = 0, - * F0:0x44 i = 1, - * F0:0x48 i = 2, - * F0:0x4c i = 3, - * F0:0x50 i = 4, - * F0:0x54 i = 5, - * F0:0x58 i = 6, - * F0:0x5c i = 7 - * [ 0: 3] Request Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [11: 8] Response Route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - * [19:16] Broadcast route - * [0] Route to this node - * [1] Route to Link 0 - * [2] Route to Link 1 - * [3] Route to Link 2 - */ - PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101, - PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101, - - /* Hypetransport Transaction Control Register - * F0:0x68 - * [ 0: 0] Disable read byte probe - * 0 = Probes issues - * 1 = Probes not issued - * [ 1: 1] Disable Read Doubleword probe - * 0 = Probes issued - * 1 = Probes not issued - * [ 2: 2] Disable write byte probes - * 0 = Probes issued - * 1 = Probes not issued - * [ 3: 3] Disable Write Doubleword Probes - * 0 = Probes issued - * 1 = Probes not issued. - * [ 4: 4] Disable Memroy Controller Target Start - * 0 = TgtStart packets are generated - * 1 = TgtStart packets are not generated. - * [ 5: 5] CPU1 Enable - * 0 = Second CPU disabled or not present - * 1 = Second CPU enabled. - * [ 6: 6] CPU Request PassPW - * 0 = CPU requests do not pass posted writes - * 1 = CPU requests pass posted writes. - * [ 7: 7] CPU read Respons PassPW - * 0 = CPU Responses do not pass posted writes - * 1 = CPU responses pass posted writes. - * [ 8: 8] Disable Probe Memory Cancel - * 0 = Probes may generate MemCancels - * 1 = Probes may not generate MemCancels - * [ 9: 9] Disable Remote Probe Memory Cancel. - * 0 = Probes hitting dirty blocks generate memory cancel packets - * 1 = Only probed caches on the same node as the memory controller - * generate cancel packets. - * [10:10] Disable Fill Probe - * 0 = Probes issued for cache fills - * 1 = Probes not issued for cache fills. - * [11:11] Response PassPw - * 0 = Downstream response PassPW based on original request - * 1 = Downstream response PassPW set to 1 - * [12:12] Change ISOC to Ordered - * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization - * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering. - * [14:13] Buffer Release Priority select - * 00 = 64 - * 01 = 16 - * 10 = 8 - * 11 = 2 - * [15:15] Limit Coherent HT Configuration Space Range - * 0 = No coherent HT configuration space restrictions - * 1 = Limit coherent HT configuration space based on node count - * [16:16] Local Interrupt Conversion Enable. - * 0 = ExtInt/NMI interrups unaffected. - * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1 - * [17:17] APIC Extended Broadcast Enable. - * 0 = APIC broadcast is 0F - * 1 = APIC broadcast is FF - * [18:18] APIC Extended ID Enable - * 0 = APIC ID is 4 bits. - * 1 = APIC ID is 8 bits. - * [19:19] APIC Extended Spurious Vector Enable - * 0 = Lower 4 bits of spurious vector are read-only 1111 - * 1 = Lower 4 bits of spurious vecotr are writeable. - * [20:20] Sequence ID Source Node Enable - * 0 = Normal operation - * 1 = Keep SeqID on routed packets for debugging. - * [22:21] Downstream non-posted request limit - * 00 = No limit - * 01 = Limited to 1 - * 10 = Limited to 4 - * 11 = Limited to 8 - * [23:23] RESERVED - * [25:24] Medium-Priority Bypass Count - * - Maximum # of times a medium priority access can pass a low - * priority access before Medium-Priority mode is disabled for one access. - * [27:26] High-Priority Bypass Count - * - Maximum # of times a high prioirty access can pass a medium or low - * priority access before High-prioirty mode is disabled for one access. - * [28:28] Enable High Priority CPU Reads - * 0 = Cpu reads are medium prioirty - * 1 = Cpu reads are high prioirty - * [29:29] Disable Low Priority Writes - * 0 = Non-isochronous writes are low priority - * 1 = Non-isochronous writes are medium prioirty - * [30:30] Disable High Priority Isochronous writes - * 0 = Isochronous writes are high priority - * 1 = Isochronous writes are medium priority - * [31:31] Disable Medium Priority Isochronous writes - * 0 = Isochronous writes are medium are high - * 1 = With bit 30 set makes Isochrouns writes low priority. - */ - PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f, - /* HT Initialization Control Register - * F0:0x6C - * [ 0: 0] Routing Table Disable - * 0 = Packets are routed according to routing tables - * 1 = Packets are routed according to the default link field - * [ 1: 1] Request Disable (BSP should clear this) - * 0 = Request packets may be generated - * 1 = Request packets may not be generated. - * [ 3: 2] Default Link (Read-only) - * 00 = LDT0 - * 01 = LDT1 - * 10 = LDT2 - * 11 = CPU on same node - * [ 4: 4] Cold Reset - * - Scratch bit cleared by a cold reset - * [ 5: 5] BIOS Reset Detect - * - Scratch bit cleared by a cold reset - * [ 6: 6] INIT Detect - * - Scratch bit cleared by a warm or cold reset not by an INIT - * - */ - PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4), - /* LDTi Capabilities Registers - * F0:0x80 i = 0, - * F0:0xA0 i = 1, - * F0:0xC0 i = 2, - */ - /* LDTi Link Control Registrs - * F0:0x84 i = 0, - * F0:0xA4 i = 1, - * F0:0xC4 i = 2, - * [ 1: 1] CRC Flood Enable - * 0 = Do not generate sync packets on CRC error - * 1 = Generate sync packets on CRC error - * [ 2: 2] CRC Start Test (Read-Only) - * [ 3: 3] CRC Force Frame Error - * 0 = Do not generate bad CRC - * 1 = Generate bad CRC - * [ 4: 4] Link Failure - * 0 = No link failure detected - * 1 = Link failure detected - * [ 5: 5] Initialization Complete - * 0 = Initialization not complete - * 1 = Initialization complete - * [ 6: 6] Receiver off - * 0 = Recevier on - * 1 = Receiver off - * [ 7: 7] Transmitter Off - * 0 = Transmitter on - * 1 = Transmitter off - * [ 9: 8] CRC_Error - * 00 = No error - * [0] = 1 Error on byte lane 0 - * [1] = 1 Error on byte lane 1 - * [12:12] Isochrnous Enable (Read-Only) - * [13:13] HT Stop Tristate Enable - * 0 = Driven during an LDTSTOP_L - * 1 = Tristated during and LDTSTOP_L - * [14:14] Extended CTL Time - * 0 = CTL is asserted for 16 bit times during link initialization - * 1 = CTL is asserted for 50us during link initialization - * [18:16] Max Link Width In (Read-Only?) - * 000 = 8 bit link - * 001 = 16bit link - * [19:19] Doubleword Flow Control in (Read-Only) - * 0 = This link does not support doubleword flow control - * 1 = This link supports doubleword flow control - * [22:20] Max Link Width Out (Read-Only?) - * 000 = 8 bit link - * 001 = 16bit link - * [23:23] Doubleworld Flow Control out (Read-Only) - * 0 = This link does not support doubleword flow control - * 1 = This link supports doubleworkd flow control - * [26:24] Link Width In - * 000 = Use 8 bits - * 001 = Use 16 bits - * 010 = reserved - * 011 = Use 32 bits - * 100 = Use 2 bits - * 101 = Use 4 bits - * 110 = reserved - * 111 = Link physically not connected - * [27:27] Doubleword Flow Control In Enable - * 0 = Doubleword flow control disabled - * 1 = Doubleword flow control enabled (Not currently supported) - * [30:28] Link Width Out - * 000 = Use 8 bits - * 001 = Use 16 bits - * 010 = reserved - * 011 = Use 32 bits - * 100 = Use 2 bits - * 101 = Use 4 bits - * 110 = reserved - * 111 = Link physically not connected - * [31:31] Doubleworld Flow Control Out Enable - * 0 = Doubleworld flow control disabled - * 1 = Doubleword flow control enabled (Not currently supported) - */ - PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020, - /* LDTi Frequency/Revision Registers - * F0:0x88 i = 0, - * F0:0xA8 i = 1, - * F0:0xC8 i = 2, - * [ 4: 0] Minor Revision - * Contains the HT Minor revision - * [ 7: 5] Major Revision - * Contains the HT Major revision - * [11: 8] Link Frequency (Takes effect the next time the link is reconnected) - * 0000 = 200Mhz - * 0001 = reserved - * 0010 = 400Mhz - * 0011 = reserved - * 0100 = 600Mhz - * 0101 = 800Mhz - * 0110 = 1000Mhz - * 0111 = reserved - * 1000 = reserved - * 1001 = reserved - * 1010 = reserved - * 1011 = reserved - * 1100 = reserved - * 1101 = reserved - * 1110 = reserved - * 1111 = 100 Mhz - * [15:12] Error (Not currently Implemented) - * [31:16] Indicates the frequency capabilities of the link - * [16] = 1 encoding 0000 of freq supported - * [17] = 1 encoding 0001 of freq supported - * [18] = 1 encoding 0010 of freq supported - * [19] = 1 encoding 0011 of freq supported - * [20] = 1 encoding 0100 of freq supported - * [21] = 1 encoding 0101 of freq supported - * [22] = 1 encoding 0110 of freq supported - * [23] = 1 encoding 0111 of freq supported - * [24] = 1 encoding 1000 of freq supported - * [25] = 1 encoding 1001 of freq supported - * [26] = 1 encoding 1010 of freq supported - * [27] = 1 encoding 1011 of freq supported - * [28] = 1 encoding 1100 of freq supported - * [29] = 1 encoding 1101 of freq supported - * [30] = 1 encoding 1110 of freq supported - * [31] = 1 encoding 1111 of freq supported - */ - PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200, - /* LDTi Feature Capability - * F0:0x8C i = 0, - * F0:0xAC i = 1, - * F0:0xCC i = 2, - */ - /* LDTi Buffer Count Registers - * F0:0x90 i = 0, - * F0:0xB0 i = 1, - * F0:0xD0 i = 2, - */ - /* LDTi Bus Number Registers - * F0:0x94 i = 0, - * F0:0xB4 i = 1, - * F0:0xD4 i = 2, - * For NonCoherent HT specifies the bus number downstream (behind the host bridge) - * [ 0: 7] Primary Bus Number - * [15: 8] Secondary Bus Number - * [23:15] Subordiante Bus Number - * [31:24] reserved - */ - PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000, - /* LDTi Type Registers - * F0:0x98 i = 0, - * F0:0xB8 i = 1, - * F0:0xD8 i = 2, - */ - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000, -#endif - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003, -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000, -#endif - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03, -#if MEMORY_1024MB - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003, -#endif -#if MEMORY_512MB - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003, -#endif - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - int i; - int max; - print_debug("setting up coherent ht domain....\r\n"); - max = sizeof(register_values)/sizeof(register_values[0]); - for(i = 0; i < max; i += 3) { - unsigned long reg; -#if 0 - print_debug_hex32(register_values[i]); - print_debug(" <-"); - print_debug_hex32(register_values[i+2]); - print_debug("\r\n"); -#endif - reg = pci_read_config32(register_values[i]); - reg &= register_values[i+1]; - reg |= register_values[i+2] & ~register_values[i+1]; - pci_write_config32(register_values[i], reg); - } - print_debug("done.\r\n"); -} - -static void enumerate_ht_chain(void) -{ - unsigned next_unitid, last_unitid;; - next_unitid = 1; - do { - uint32_t id; - uint8_t hdr_type, pos; - last_unitid = next_unitid; - - id = pci_read_config32(PCI_ADDR(0,0,0,PCI_VENDOR_ID)); - /* If the chain is enumerated quit */ - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - break; - } - hdr_type = pci_read_config8(PCI_ADDR(0,0,0,PCI_HEADER_TYPE)); - pos = 0; - hdr_type &= 0x7f; - - if ((hdr_type == PCI_HEADER_TYPE_NORMAL) || - (hdr_type == PCI_HEADER_TYPE_BRIDGE)) { - pos = pci_read_config8(PCI_ADDR(0,0,0, PCI_CAPABILITY_LIST)); - } - while(pos != 0) { - uint8_t cap; - cap = pci_read_config8(PCI_ADDR(0,0,0, pos + PCI_CAP_LIST_ID)); - if (cap == PCI_CAP_ID_HT) { - uint16_t flags; - flags = pci_read_config16(PCI_ADDR(0,0,0, pos + PCI_CAP_FLAGS)); - if ((flags >> 13) == 0) { - unsigned count; - flags &= ~0x1f; - flags |= next_unitid & 0x1f; - count = (flags >> 5) & 0x1f; - pci_write_config16(PCI_ADDR(0, 0, 0, pos + PCI_CAP_FLAGS), flags); - next_unitid += count; - break; - } - } - pos = pci_read_config8(PCI_ADDR(0, 0, 0, pos + PCI_CAP_LIST_NEXT)); - } - } while((last_unitid != next_unitid) && (next_unitid <= 0x1f)); -} static void print_pci_devices(void) { @@ -1510,123 +78,6 @@ static void print_pci_devices(void) } } -#define PCI_ID(VENDOR_ID, DEVICE_ID) ((DEVICE_ID << 16) | (VENDOR_ID)) -#define SMBUS_IO_BASE 0x1000 - -#define SMBGSTATUS 0xe0 -#define SMBGCTL 0xe2 -#define SMBHSTADDR 0xe4 -#define SMBHSTDAT 0xe6 -#define SMBHSTCMD 0xe8 -#define SMBHSTFIFO 0xe9 - -#define SMBUS_TIMEOUT (100*1000*10) - -static void enable_smbus(void) -{ - uint32_t addr; - for(addr = PCI_ADDR(0, 0, 0, 0); - addr <= PCI_ADDR(0, 0x1f, 0x7, 0); - addr += PCI_ADDR(0,0,1,0)) { - uint32_t id; - id = pci_read_config32(addr); - if (id == PCI_ID(0x1022, 0x746b)) { - break; - } - } - if (addr > PCI_ADDR(0, 0x1f, 0x7, 0)) { - die("SMBUS controller not found\r\n"); - } - uint8_t enable; - print_debug("SMBus controller enabled\r\n"); - pci_write_config32(addr + 0x58, SMBUS_IO_BASE | 1); - enable = pci_read_config8(addr + 0x41); - pci_write_config8(addr + 0x41, enable | (1 << 7)); -} - - -static inline void smbus_delay(void) -{ - outb(0x80, 0x80); -} - -static int smbus_wait_until_ready(void) -{ - unsigned long loops; - loops = SMBUS_TIMEOUT; - do { - unsigned short val; - smbus_delay(); - val = inw(SMBUS_IO_BASE + SMBGSTATUS); - if ((val & 0x800) == 0) { - break; - } - } while(--loops); - return loops?0:-1; -} - -static int smbus_wait_until_done(void) -{ - unsigned long loops; - loops = SMBUS_TIMEOUT; - do { - unsigned short val; - smbus_delay(); - - val = inw(SMBUS_IO_BASE + SMBGSTATUS); - if (((val & 0x8) == 0) || ((val & 0x437) != 0)) { - break; - } - } while(--loops); - return loops?0:-1; -} - -static int smbus_read_byte(unsigned device, unsigned address) -{ - unsigned char global_control_register; - unsigned char global_status_register; - unsigned char byte; - - if (smbus_wait_until_ready() < 0) { - return -1; - } - - /* setup transaction */ - /* disable interrupts */ - outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), SMBUS_IO_BASE + SMBGCTL); - /* set the device I'm talking too */ - outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR); - /* set the command/address... */ - outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD); - /* set up for a byte data read */ - outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x2), SMBUS_IO_BASE + SMBGCTL); - - /* clear any lingering errors, so the transaction will run */ - /* Do I need to write the bits to a 1 to clear an error? */ - outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS); - - /* clear the data word...*/ - outw(0, SMBUS_IO_BASE + SMBHSTDAT); - - /* start the command */ - outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL); - - - /* poll for transaction completion */ - if (smbus_wait_until_done() < 0) { - return -1; - } - - global_status_register = inw(SMBUS_IO_BASE + SMBGSTATUS); - - /* read results of transaction */ - byte = inw(SMBUS_IO_BASE + SMBHSTDAT) & 0xff; - - if (global_status_register != (1 << 4)) { - return -1; - } - return byte; -} static void dump_spd_registers(void) { @@ -1648,7 +99,7 @@ static void dump_spd_registers(void) status = smbus_read_byte(device, i); if (status < 0) { print_debug("bad device\r\n"); - continue; + break; } byte = status & 0xff; print_debug_hex8(byte); @@ -1659,55 +110,83 @@ static void dump_spd_registers(void) } } -static void dump_spd_registers1(void) + +static void pnp_write_config(unsigned char port, unsigned char value, unsigned char reg) { - int i; - print_debug("dimm: "); - print_debug_hex8(SMBUS_MEM_DEVICE_START); - for(i = 0; i < 256; i++) { - int status; - unsigned char byte; - if ((i & 0xf) == 0) { - print_debug("\r\n"); - print_debug_hex8(i); - print_debug(": "); - } - status = smbus_read_byte(SMBUS_MEM_DEVICE_START, i); - if (status < 0) { - print_debug("bad device\r\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\r\n"); + outb(reg, port); + outb(value, port +1); } +static unsigned char pnp_read_config(unsigned char port, unsigned char reg) +{ + outb(reg, port); + return inb(port +1); +} +static void pnp_set_logical_device(unsigned char port, int device) +{ + pnp_write_config(port, device, 0x07); +} -static void dump_spd_registers2(void) +static void pnp_set_enable(unsigned char port, int enable) { - unsigned dev; - print_debug("\r\n"); - for(dev = SMBUS_MEM_DEVICE_START; dev <= SMBUS_MEM_DEVICE_END; dev += SMBUS_MEM_DEVICE_INC) { - print_debug("dimm: "); - print_debug_hex8(dev); - int status; - unsigned char byte; - status = smbus_read_byte(dev, 0); - if (status < 0) { - print_debug("bad device\r\n"); - continue; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug("\r\n"); - } + pnp_write_config(port, enable?0x1:0x0, 0x30); +} + +static int pnp_read_enable(unsigned char port) +{ + return !!pnp_read_config(port, 0x30); +} + +static void pnp_set_iobase0(unsigned char port, unsigned iobase) +{ + pnp_write_config(port, (iobase >> 8) & 0xff, 0x60); + pnp_write_config(port, iobase & 0xff, 0x61); +} + +static void pnp_set_iobase1(unsigned char port, unsigned iobase) +{ + pnp_write_config(port, (iobase >> 8) & 0xff, 0x62); + pnp_write_config(port, iobase & 0xff, 0x63); +} + +static void pnp_set_irq0(unsigned char port, unsigned irq) +{ + pnp_write_config(port, irq, 0x70); +} + +static void pnp_set_irq1(unsigned char port, unsigned irq) +{ + pnp_write_config(port, irq, 0x72); +} + +static void pnp_set_drq(unsigned char port, unsigned drq) +{ + pnp_write_config(port, drq & 0xff, 0x74); +} + +#define PC87360_FDC 0x00 +#define PC87360_PP 0x01 +#define PC87360_SP2 0x02 +#define PC87360_SP1 0x03 +#define PC87360_SWC 0x04 +#define PC87360_KBCM 0x05 +#define PC87360_KBCK 0x06 +#define PC87360_GPIO 0x07 +#define PC87360_ACB 0x08 +#define PC87360_FSCM 0x09 +#define PC87360_WDT 0x0A + +static void pc87360_enable_serial(void) +{ + pnp_set_logical_device(SIO_BASE, PC87360_SP1); + pnp_set_enable(SIO_BASE, 1); + pnp_set_iobase0(SIO_BASE, 0x3f8); } static void main(void) { + pc87360_enable_serial(); uart_init(); console_init(); if (boot_cpu() && !cpu_init_detected()) { @@ -1716,11 +195,8 @@ static void main(void) print_pci_devices(); enable_smbus(); sdram_initialize(); -#if 0 + dump_spd_registers(); -#endif - dump_spd_registers1(); - dump_spd_registers2(); #if 0 ram_fill( 0x00100000, 0x00180000); ram_verify(0x00100000, 0x00180000); diff --git a/src/mainboard/amd/solo/failover.c b/src/mainboard/amd/solo/failover.c new file mode 100644 index 0000000000..cda8ea8076 --- /dev/null +++ b/src/mainboard/amd/solo/failover.c @@ -0,0 +1,26 @@ +#define ASSEMBLY 1 +#include +#include +#include +#include "arch/romcc_io.h" +#include "pc80/mc146818rtc_early.c" +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + + + +static void main(void) +{ + if (do_normal_boot()) { + /* Nothing special needs to be done to find bus 0 */ + + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + /* Setup the 8111 */ + amd8111_enable_rom(); + + /* Jump to the normal image */ + asm("jmp __normal_image"); + } +} diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c new file mode 100644 index 0000000000..9b799b3d31 --- /dev/null +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -0,0 +1,591 @@ +static void setup_coherent_ht_domain(void) +{ + static const unsigned int register_values[] = { + /* Routing Table Node i + * F0:0x40 i = 0, + * F0:0x44 i = 1, + * F0:0x48 i = 2, + * F0:0x4c i = 3, + * F0:0x50 i = 4, + * F0:0x54 i = 5, + * F0:0x58 i = 6, + * F0:0x5c i = 7 + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101, + PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101, + + /* Hypetransport Transaction Control Register + * F0:0x68 + * [ 0: 0] Disable read byte probe + * 0 = Probes issues + * 1 = Probes not issued + * [ 1: 1] Disable Read Doubleword probe + * 0 = Probes issued + * 1 = Probes not issued + * [ 2: 2] Disable write byte probes + * 0 = Probes issued + * 1 = Probes not issued + * [ 3: 3] Disable Write Doubleword Probes + * 0 = Probes issued + * 1 = Probes not issued. + * [ 4: 4] Disable Memroy Controller Target Start + * 0 = TgtStart packets are generated + * 1 = TgtStart packets are not generated. + * [ 5: 5] CPU1 Enable + * 0 = Second CPU disabled or not present + * 1 = Second CPU enabled. + * [ 6: 6] CPU Request PassPW + * 0 = CPU requests do not pass posted writes + * 1 = CPU requests pass posted writes. + * [ 7: 7] CPU read Respons PassPW + * 0 = CPU Responses do not pass posted writes + * 1 = CPU responses pass posted writes. + * [ 8: 8] Disable Probe Memory Cancel + * 0 = Probes may generate MemCancels + * 1 = Probes may not generate MemCancels + * [ 9: 9] Disable Remote Probe Memory Cancel. + * 0 = Probes hitting dirty blocks generate memory cancel packets + * 1 = Only probed caches on the same node as the memory controller + * generate cancel packets. + * [10:10] Disable Fill Probe + * 0 = Probes issued for cache fills + * 1 = Probes not issued for cache fills. + * [11:11] Response PassPw + * 0 = Downstream response PassPW based on original request + * 1 = Downstream response PassPW set to 1 + * [12:12] Change ISOC to Ordered + * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization + * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering. + * [14:13] Buffer Release Priority select + * 00 = 64 + * 01 = 16 + * 10 = 8 + * 11 = 2 + * [15:15] Limit Coherent HT Configuration Space Range + * 0 = No coherent HT configuration space restrictions + * 1 = Limit coherent HT configuration space based on node count + * [16:16] Local Interrupt Conversion Enable. + * 0 = ExtInt/NMI interrups unaffected. + * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1 + * [17:17] APIC Extended Broadcast Enable. + * 0 = APIC broadcast is 0F + * 1 = APIC broadcast is FF + * [18:18] APIC Extended ID Enable + * 0 = APIC ID is 4 bits. + * 1 = APIC ID is 8 bits. + * [19:19] APIC Extended Spurious Vector Enable + * 0 = Lower 4 bits of spurious vector are read-only 1111 + * 1 = Lower 4 bits of spurious vecotr are writeable. + * [20:20] Sequence ID Source Node Enable + * 0 = Normal operation + * 1 = Keep SeqID on routed packets for debugging. + * [22:21] Downstream non-posted request limit + * 00 = No limit + * 01 = Limited to 1 + * 10 = Limited to 4 + * 11 = Limited to 8 + * [23:23] RESERVED + * [25:24] Medium-Priority Bypass Count + * - Maximum # of times a medium priority access can pass a low + * priority access before Medium-Priority mode is disabled for one access. + * [27:26] High-Priority Bypass Count + * - Maximum # of times a high prioirty access can pass a medium or low + * priority access before High-prioirty mode is disabled for one access. + * [28:28] Enable High Priority CPU Reads + * 0 = Cpu reads are medium prioirty + * 1 = Cpu reads are high prioirty + * [29:29] Disable Low Priority Writes + * 0 = Non-isochronous writes are low priority + * 1 = Non-isochronous writes are medium prioirty + * [30:30] Disable High Priority Isochronous writes + * 0 = Isochronous writes are high priority + * 1 = Isochronous writes are medium priority + * [31:31] Disable Medium Priority Isochronous writes + * 0 = Isochronous writes are medium are high + * 1 = With bit 30 set makes Isochrouns writes low priority. + */ + PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f, + /* HT Initialization Control Register + * F0:0x6C + * [ 0: 0] Routing Table Disable + * 0 = Packets are routed according to routing tables + * 1 = Packets are routed according to the default link field + * [ 1: 1] Request Disable (BSP should clear this) + * 0 = Request packets may be generated + * 1 = Request packets may not be generated. + * [ 3: 2] Default Link (Read-only) + * 00 = LDT0 + * 01 = LDT1 + * 10 = LDT2 + * 11 = CPU on same node + * [ 4: 4] Cold Reset + * - Scratch bit cleared by a cold reset + * [ 5: 5] BIOS Reset Detect + * - Scratch bit cleared by a cold reset + * [ 6: 6] INIT Detect + * - Scratch bit cleared by a warm or cold reset not by an INIT + * + */ + PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4), + /* LDTi Capabilities Registers + * F0:0x80 i = 0, + * F0:0xA0 i = 1, + * F0:0xC0 i = 2, + */ + /* LDTi Link Control Registrs + * F0:0x84 i = 0, + * F0:0xA4 i = 1, + * F0:0xC4 i = 2, + * [ 1: 1] CRC Flood Enable + * 0 = Do not generate sync packets on CRC error + * 1 = Generate sync packets on CRC error + * [ 2: 2] CRC Start Test (Read-Only) + * [ 3: 3] CRC Force Frame Error + * 0 = Do not generate bad CRC + * 1 = Generate bad CRC + * [ 4: 4] Link Failure + * 0 = No link failure detected + * 1 = Link failure detected + * [ 5: 5] Initialization Complete + * 0 = Initialization not complete + * 1 = Initialization complete + * [ 6: 6] Receiver off + * 0 = Recevier on + * 1 = Receiver off + * [ 7: 7] Transmitter Off + * 0 = Transmitter on + * 1 = Transmitter off + * [ 9: 8] CRC_Error + * 00 = No error + * [0] = 1 Error on byte lane 0 + * [1] = 1 Error on byte lane 1 + * [12:12] Isochrnous Enable (Read-Only) + * [13:13] HT Stop Tristate Enable + * 0 = Driven during an LDTSTOP_L + * 1 = Tristated during and LDTSTOP_L + * [14:14] Extended CTL Time + * 0 = CTL is asserted for 16 bit times during link initialization + * 1 = CTL is asserted for 50us during link initialization + * [18:16] Max Link Width In (Read-Only?) + * 000 = 8 bit link + * 001 = 16bit link + * [19:19] Doubleword Flow Control in (Read-Only) + * 0 = This link does not support doubleword flow control + * 1 = This link supports doubleword flow control + * [22:20] Max Link Width Out (Read-Only?) + * 000 = 8 bit link + * 001 = 16bit link + * [23:23] Doubleworld Flow Control out (Read-Only) + * 0 = This link does not support doubleword flow control + * 1 = This link supports doubleworkd flow control + * [26:24] Link Width In + * 000 = Use 8 bits + * 001 = Use 16 bits + * 010 = reserved + * 011 = Use 32 bits + * 100 = Use 2 bits + * 101 = Use 4 bits + * 110 = reserved + * 111 = Link physically not connected + * [27:27] Doubleword Flow Control In Enable + * 0 = Doubleword flow control disabled + * 1 = Doubleword flow control enabled (Not currently supported) + * [30:28] Link Width Out + * 000 = Use 8 bits + * 001 = Use 16 bits + * 010 = reserved + * 011 = Use 32 bits + * 100 = Use 2 bits + * 101 = Use 4 bits + * 110 = reserved + * 111 = Link physically not connected + * [31:31] Doubleworld Flow Control Out Enable + * 0 = Doubleworld flow control disabled + * 1 = Doubleword flow control enabled (Not currently supported) + */ + PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020, + /* LDTi Frequency/Revision Registers + * F0:0x88 i = 0, + * F0:0xA8 i = 1, + * F0:0xC8 i = 2, + * [ 4: 0] Minor Revision + * Contains the HT Minor revision + * [ 7: 5] Major Revision + * Contains the HT Major revision + * [11: 8] Link Frequency (Takes effect the next time the link is reconnected) + * 0000 = 200Mhz + * 0001 = reserved + * 0010 = 400Mhz + * 0011 = reserved + * 0100 = 600Mhz + * 0101 = 800Mhz + * 0110 = 1000Mhz + * 0111 = reserved + * 1000 = reserved + * 1001 = reserved + * 1010 = reserved + * 1011 = reserved + * 1100 = reserved + * 1101 = reserved + * 1110 = reserved + * 1111 = 100 Mhz + * [15:12] Error (Not currently Implemented) + * [31:16] Indicates the frequency capabilities of the link + * [16] = 1 encoding 0000 of freq supported + * [17] = 1 encoding 0001 of freq supported + * [18] = 1 encoding 0010 of freq supported + * [19] = 1 encoding 0011 of freq supported + * [20] = 1 encoding 0100 of freq supported + * [21] = 1 encoding 0101 of freq supported + * [22] = 1 encoding 0110 of freq supported + * [23] = 1 encoding 0111 of freq supported + * [24] = 1 encoding 1000 of freq supported + * [25] = 1 encoding 1001 of freq supported + * [26] = 1 encoding 1010 of freq supported + * [27] = 1 encoding 1011 of freq supported + * [28] = 1 encoding 1100 of freq supported + * [29] = 1 encoding 1101 of freq supported + * [30] = 1 encoding 1110 of freq supported + * [31] = 1 encoding 1111 of freq supported + */ + PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200, + /* LDTi Feature Capability + * F0:0x8C i = 0, + * F0:0xAC i = 1, + * F0:0xCC i = 2, + */ + /* LDTi Buffer Count Registers + * F0:0x90 i = 0, + * F0:0xB0 i = 1, + * F0:0xD0 i = 2, + */ + /* LDTi Bus Number Registers + * F0:0x94 i = 0, + * F0:0xB4 i = 1, + * F0:0xD4 i = 2, + * For NonCoherent HT specifies the bus number downstream (behind the host bridge) + * [ 0: 7] Primary Bus Number + * [15: 8] Secondary Bus Number + * [23:15] Subordiante Bus Number + * [31:24] reserved + */ + PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000, + /* LDTi Type Registers + * F0:0x98 i = 0, + * F0:0xB8 i = 1, + * F0:0xD8 i = 2, + */ + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000, +#endif + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003, +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000, +#endif + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03, +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003, +#endif + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + int i; + int max; + print_debug("setting up coherent ht domain....\r\n"); + max = sizeof(register_values)/sizeof(register_values[0]); + for(i = 0; i < max; i += 3) { + unsigned long reg; +#if 0 + print_debug_hex32(register_values[i]); + print_debug(" <-"); + print_debug_hex32(register_values[i+2]); + print_debug("\r\n"); +#endif + reg = pci_read_config32(register_values[i]); + reg &= register_values[i+1]; + reg |= register_values[i+2] & ~register_values[i+1]; + pci_write_config32(register_values[i], reg); + } + print_debug("done.\r\n"); +} + diff --git a/src/northbridge/amd/amdk8/early_ht.c b/src/northbridge/amd/amdk8/early_ht.c new file mode 100644 index 0000000000..36e5b9a39f --- /dev/null +++ b/src/northbridge/amd/amdk8/early_ht.c @@ -0,0 +1,49 @@ +static void enumerate_ht_chain(void) +{ + /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it. + * On most boards this just happens. If a cpu has multiple + * non Coherent links the appropriate bus registers for the + * links needs to be programed to point at bus 0. + */ + unsigned next_unitid, last_unitid;; + next_unitid = 1; + do { + uint32_t id; + uint8_t hdr_type, pos; + last_unitid = next_unitid; + + id = pci_read_config32(PCI_ADDR(0,0,0,PCI_VENDOR_ID)); + /* If the chain is enumerated quit */ + if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || + (((id >> 16) & 0xffff) == 0xffff) || + (((id >> 16) & 0xffff) == 0x0000)) { + break; + } + hdr_type = pci_read_config8(PCI_ADDR(0,0,0,PCI_HEADER_TYPE)); + pos = 0; + hdr_type &= 0x7f; + + if ((hdr_type == PCI_HEADER_TYPE_NORMAL) || + (hdr_type == PCI_HEADER_TYPE_BRIDGE)) { + pos = pci_read_config8(PCI_ADDR(0,0,0, PCI_CAPABILITY_LIST)); + } + while(pos != 0) { + uint8_t cap; + cap = pci_read_config8(PCI_ADDR(0,0,0, pos + PCI_CAP_LIST_ID)); + if (cap == PCI_CAP_ID_HT) { + uint16_t flags; + flags = pci_read_config16(PCI_ADDR(0,0,0, pos + PCI_CAP_FLAGS)); + if ((flags >> 13) == 0) { + unsigned count; + flags &= ~0x1f; + flags |= next_unitid & 0x1f; + count = (flags >> 5) & 0x1f; + pci_write_config16(PCI_ADDR(0, 0, 0, pos + PCI_CAP_FLAGS), flags); + next_unitid += count; + break; + } + } + pos = pci_read_config8(PCI_ADDR(0, 0, 0, pos + PCI_CAP_LIST_NEXT)); + } + } while((last_unitid != next_unitid) && (next_unitid <= 0x1f)); +} diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c new file mode 100644 index 0000000000..156b80a6a6 --- /dev/null +++ b/src/northbridge/amd/amdk8/raminit.c @@ -0,0 +1,792 @@ +#define MEMORY_512MB 0 /* SuSE Solo configuration */ +#define MEMORY_1024MB 1 /* LNXI Solo configuration */ + +static void sdram_set_registers(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000, +#endif + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003, +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000, +#endif + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03, +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003, +#endif + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + /* DRAM CS Base Address i Registers + * F2:0x40 i = 0 + * F2:0x44 i = 1 + * F2:0x48 i = 2 + * F2:0x4C i = 3 + * F2:0x50 i = 4 + * F2:0x54 i = 5 + * F2:0x58 i = 6 + * F2:0x5C i = 7 + * [ 0: 0] Chip-Select Bank Enable + * 0 = Bank Disabled + * 1 = Bank Enabled + * [ 8: 1] Reserved + * [15: 9] Base Address (19-13) + * An optimization used when all DIMM are the same size... + * [20:16] Reserved + * [31:21] Base Address (35-25) + * This field defines the top 11 addresses bit of a 40-bit + * address that define the memory address space. These + * bits decode 32-MByte blocks of memory. + */ + PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001, +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001, + PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001, + PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001, + PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001, + PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001, +#endif + PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x5C), 0x001f01fe, 0x00000000, + /* DRAM CS Mask Address i Registers + * F2:0x60 i = 0 + * F2:0x64 i = 1 + * F2:0x68 i = 2 + * F2:0x6C i = 3 + * F2:0x70 i = 4 + * F2:0x74 i = 5 + * F2:0x78 i = 6 + * F2:0x7C i = 7 + * Select bits to exclude from comparison with the DRAM Base address register. + * [ 8: 0] Reserved + * [15: 9] Address Mask (19-13) + * Address to be excluded from the optimized case + * [20:16] Reserved + * [29:21] Address Mask (33-25) + * The bits with an address mask of 1 are excluded from address comparison + * [31:30] Reserved + * + */ +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00, + PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00, + PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00, + PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00, + PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00, + PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00, + PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00, +#endif + PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x7C), 0xC01f01ff, 0x00000000, + /* DRAM Bank Address Mapping Register + * F2:0x80 + * Specify the memory module size + * [ 2: 0] CS1/0 + * [ 6: 4] CS3/2 + * [10: 8] CS5/4 + * [14:12] CS7/6 + * 000 = 32Mbyte (Rows = 12 & Col = 8) + * 001 = 64Mbyte (Rows = 12 & Col = 9) + * 010 = 128Mbyte (Rows = 13 & Col = 9)|(Rows = 12 & Col = 10) + * 011 = 256Mbyte (Rows = 13 & Col = 10)|(Rows = 12 & Col = 11) + * 100 = 512Mbyte (Rows = 13 & Col = 11)|(Rows = 14 & Col = 10) + * 101 = 1Gbyte (Rows = 14 & Col = 11)|(Rows = 13 & Col = 12) + * 110 = 2Gbyte (Rows = 14 & Col = 12) + * 111 = reserved + * [ 3: 3] Reserved + * [ 7: 7] Reserved + * [11:11] Reserved + * [31:15] + */ +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022, +#endif + /* DRAM Timing Low Register + * F2:0x88 + * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid) + * 000 = reserved + * 001 = CL 2 + * 010 = CL 3 + * 011 = reserved + * 100 = reserved + * 101 = CL 2.5 + * 110 = reserved + * 111 = reserved + * [ 3: 3] Reserved + * [ 7: 4] Trc (Row Cycle Time, Ras#-active to Ras#-active/bank auto refresh) + * 0000 = 7 bus clocks + * 0001 = 8 bus clocks + * ... + * 1110 = 21 bus clocks + * 1111 = 22 bus clocks + * [11: 8] Trfc (Row refresh Cycle time, Auto-refresh-active to RAS#-active or RAS#auto-refresh) + * 0000 = 9 bus clocks + * 0010 = 10 bus clocks + * .... + * 1110 = 23 bus clocks + * 1111 = 24 bus clocks + * [14:12] Trcd (Ras#-active to Case#-read/write Delay) + * 000 = reserved + * 001 = reserved + * 010 = 2 bus clocks + * 011 = 3 bus clocks + * 100 = 4 bus clocks + * 101 = 5 bus clocks + * 110 = 6 bus clocks + * 111 = reserved + * [15:15] Reserved + * [18:16] Trrd (Ras# to Ras# Delay) + * 000 = reserved + * 001 = reserved + * 010 = 2 bus clocks + * 011 = 3 bus clocks + * 100 = 4 bus clocks + * 101 = reserved + * 110 = reserved + * 111 = reserved + * [19:19] Reserved + * [23:20] Tras (Minmum Ras# Active Time) + * 0000 to 0100 = reserved + * 0101 = 5 bus clocks + * ... + * 1111 = 15 bus clocks + * [26:24] Trp (Row Precharge Time) + * 000 = reserved + * 001 = reserved + * 010 = 2 bus clocks + * 011 = 3 bus clocks + * 100 = 4 bus clocks + * 101 = 5 bus clocks + * 110 = 6 bus clocks + * 111 = reserved + * [27:27] Reserved + * [28:28] Twr (Write Recovery Time) + * 0 = 2 bus clocks + * 1 = 3 bus clocks + * [31:29] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125, + /* DRAM Timing High Register + * F2:0x8C + * [ 0: 0] Twtr (Write to Read Delay) + * 0 = 1 bus Clocks + * 1 = 2 bus Clocks + * [ 3: 1] Reserved + * [ 6: 4] Trwf (Read to Write Delay) + * 000 = 1 bus clocks + * 001 = 2 bus clocks + * 010 = 3 bus clocks + * 011 = 4 bus clocks + * 100 = 5 bus clocks + * 101 = 6 bus clocks + * 110 = reserved + * 111 = reserved + * [ 7: 7] Reserved + * [12: 8] Tref (Refresh Rate) + * 00000 = 100Mhz 4K rows + * 00001 = 133Mhz 4K rows + * 00010 = 166Mhz 4K rows + * 01000 = 100Mhz 8K/16K rows + * 01001 = 133Mhz 8K/16K rows + * 01010 = 166Mhz 8K/16K rows + * [19:13] Reserved + * [22:20] Twcl (Write CAS Latency) + * 000 = 1 Mem clock after CAS# (Unbuffered Dimms) + * 001 = 2 Mem clocks after CAS# (Registered Dimms) + * [31:23] Reserved + */ +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130, +#endif + + /* DRAM Config Low Register + * F2:0x90 + * [ 0: 0] DLL Disable + * 0 = Enabled + * 1 = Disabled + * [ 1: 1] D_DRV + * 0 = Normal Drive + * 1 = Weak Drive + * [ 2: 2] QFC_EN + * 0 = Disabled + * 1 = Enabled + * [ 3: 3] Disable DQS Hystersis (FIXME handle this one carefully) + * 0 = Enable DQS input filter + * 1 = Disable DQS input filtering + * [ 7: 4] Reserved + * [ 8: 8] DRAM_Init + * 0 = Initialization done or not yet started. + * 1 = Initiate DRAM intialization sequence + * [ 9: 9] SO-Dimm Enable + * 0 = Do nothing + * 1 = SO-Dimms present + * [10:10] DramEnable + * 0 = DRAM not enabled + * 1 = DRAM initialized and enabled + * [11:11] Memory Clear Status + * 0 = Memory Clear function has not completed + * 1 = Memory Clear function has completed + * [12:12] Exit Self-Refresh + * 0 = Exit from self-refresh done or not yet started + * 1 = DRAM exiting from self refresh + * [13:13] Self-Refresh Status + * 0 = Normal Operation + * 1 = Self-refresh mode active + * [15:14] Read/Write Queue Bypass Count + * 00 = 2 + * 01 = 4 + * 10 = 8 + * 11 = 16 + * [16:16] 128-bit/64-Bit + * 0 = 64bit Interface to DRAM + * 1 = 128bit Interface to DRAM + * [17:17] DIMM ECC Enable + * 0 = Some DIMMs do not have ECC + * 1 = ALL DIMMS have ECC bits + * [18:18] UnBuffered DIMMs + * 0 = Buffered DIMMS + * 1 = Unbuffered DIMMS + * [19:19] Enable 32-Byte Granularity + * 0 = Optimize for 64byte bursts + * 1 = Optimize for 32byte bursts + * [20:20] DIMM 0 is x4 + * [21:21] DIMM 1 is x4 + * [22:22] DIMM 2 is x4 + * [23:23] DIMM 3 is x4 + * 0 = DIMM is not x4 + * 1 = x4 DIMM present + * [24:24] Disable DRAM Receivers + * 0 = Receivers enabled + * 1 = Receivers disabled + * [27:25] Bypass Max + * 000 = Arbiters chois is always respected + * 001 = Oldest entry in DCQ can be bypassed 1 time + * 010 = Oldest entry in DCQ can be bypassed 2 times + * 011 = Oldest entry in DCQ can be bypassed 3 times + * 100 = Oldest entry in DCQ can be bypassed 4 times + * 101 = Oldest entry in DCQ can be bypassed 5 times + * 110 = Oldest entry in DCQ can be bypassed 6 times + * 111 = Oldest entry in DCQ can be bypassed 7 times + * [31:28] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000, + (4 << 25)|(0 << 24)| + (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)| + (1 << 19)|(1 << 18)|(0 << 17)|(0 << 16)| + (2 << 14)|(0 << 13)|(0 << 12)| + (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)| + (0 << 3) |(0 << 1) |(0 << 0), + /* DRAM Config High Register + * F2:0x94 + * [ 0: 3] Maximum Asynchronous Latency + * 0000 = 0 ns + * ... + * 1111 = 15 ns + * [ 7: 4] Reserved + * [11: 8] Read Preamble + * 0000 = 2.0 ns + * 0001 = 2.5 ns + * 0010 = 3.0 ns + * 0011 = 3.5 ns + * 0100 = 4.0 ns + * 0101 = 4.5 ns + * 0110 = 5.0 ns + * 0111 = 5.5 ns + * 1000 = 6.0 ns + * 1001 = 6.5 ns + * 1010 = 7.0 ns + * 1011 = 7.5 ns + * 1100 = 8.0 ns + * 1101 = 8.5 ns + * 1110 = 9.0 ns + * 1111 = 9.5 ns + * [15:12] Reserved + * [18:16] Idle Cycle Limit + * 000 = 0 cycles + * 001 = 4 cycles + * 010 = 8 cycles + * 011 = 16 cycles + * 100 = 32 cycles + * 101 = 64 cycles + * 110 = 128 cycles + * 111 = 256 cycles + * [19:19] Dynamic Idle Cycle Center Enable + * 0 = Use Idle Cycle Limit + * 1 = Generate a dynamic Idle cycle limit + * [22:20] DRAM MEMCLK Frequency + * 000 = 100Mhz + * 001 = reserved + * 010 = 133Mhz + * 011 = reserved + * 100 = reserved + * 101 = 166Mhz + * 110 = reserved + * 111 = reserved + * [24:23] Reserved + * [25:25] Memory Clock Ratio Valid (FIXME carefully enable memclk) + * 0 = Disable MemClks + * 1 = Enable MemClks + * [26:26] Memory Clock 0 Enable + * 0 = Disabled + * 1 = Enabled + * [27:27] Memory Clock 1 Enable + * 0 = Disabled + * 1 = Enabled + * [28:28] Memory Clock 2 Enable + * 0 = Disabled + * 1 = Enabled + * [29:29] Memory Clock 3 Enable + * 0 = Disabled + * 1 = Enabled + * [31:30] Reserved + */ +#if MEMORY_1024MB + PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05, +#endif +#if MEMORY_512MB + PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06, +#endif + /* DRAM Delay Line Register + * F2:0x98 + * Adjust the skew of the input DQS strobe relative to DATA + * [15: 0] Reserved + * [23:16] Delay Line Adjust + * Adjusts the DLL derived PDL delay by one or more delay stages + * in either the faster or slower direction. + * [24:24} Adjust Slower + * 0 = Do Nothing + * 1 = Adj is used to increase the PDL delay + * [25:25] Adjust Faster + * 0 = Do Nothing + * 1 = Adj is used to decrease the PDL delay + * [31:26] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x98), 0xfc00ffff, 0x00000000, + /* DRAM Scrub Control Register + * F3:0x58 + * [ 4: 0] DRAM Scrube Rate + * [ 7: 5] reserved + * [12: 8] L2 Scrub Rate + * [15:13] reserved + * [20:16] Dcache Scrub + * [31:21] reserved + * Scrub Rates + * 00000 = Do not scrub + * 00001 = 40.00 ns + * 00010 = 80.00 ns + * 00011 = 160.00 ns + * 00100 = 320.00 ns + * 00101 = 640.00 ns + * 00110 = 1.28 us + * 00111 = 2.56 us + * 01000 = 5.12 us + * 01001 = 10.20 us + * 01011 = 41.00 us + * 01100 = 81.90 us + * 01101 = 163.80 us + * 01110 = 327.70 us + * 01111 = 655.40 us + * 10000 = 1.31 ms + * 10001 = 2.62 ms + * 10010 = 5.24 ms + * 10011 = 10.49 ms + * 10100 = 20.97 ms + * 10101 = 42.00 ms + * 10110 = 84.00 ms + * All Others = Reserved + */ + PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000, + /* DRAM Scrub Address Low Register + * F3:0x5C + * [ 0: 0] DRAM Scrubber Redirect Enable + * 0 = Do nothing + * 1 = Scrubber Corrects errors found in normal operation + * [ 5: 1] Reserved + * [31: 6] DRAM Scrub Address 31-6 + */ + PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000, + /* DRAM Scrub Address High Register + * F3:0x60 + * [ 7: 0] DRAM Scrubb Address 39-32 + * [31: 8] Reserved + */ + PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000, + }; + int i; + int max; + print_debug("setting up CPU0 northbridge registers\r\n"); + max = sizeof(register_values)/sizeof(register_values[0]); + for(i = 0; i < max; i += 3) { + unsigned long reg; +#if 0 + print_debug_hex32(register_values[i]); + print_debug(" <-"); + print_debug_hex32(register_values[i+2]); + print_debug("\r\n"); +#endif + reg = pci_read_config32(register_values[i]); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32(register_values[i], reg); + } + print_debug("done.\r\n"); +} + +#define DRAM_CONFIG_LOW 0x90 +#define DCL_DLL_Disable (1<<0) +#define DCL_D_DRV (1<<1) +#define DCL_QFC_EN (1<<2) +#define DCL_DisDqsHys (1<<3) +#define DCL_DramInit (1<<8) +#define DCL_DramEnable (1<<10) +#define DCL_MemClrStatus (1<<11) +#define DCL_DimmEcEn (1<<17) + +#define NODE_ID 0x60 +#define HT_INIT_CONTROL 0x6c + +#define HTIC_ColdR_Detect (1<<4) +#define HTIC_BIOSR_Detect (1<<5) +#define HTIC_INIT_Detect (1<<6) + +static void sdram_set_spd_registers(void) +{ + unsigned long dcl; + dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW)); + /* Until I know what is going on disable ECC support */ + dcl &= ~DCL_DimmEcEn; + pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl); +} + +#define TIMEOUT_LOOPS 300000 +static void sdram_enable(void) +{ + unsigned long dcl; + + /* Toggle DisDqsHys to get it working */ + dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW)); + print_debug("dcl: "); + print_debug_hex32(dcl); + print_debug("\r\n"); + dcl |= DCL_DisDqsHys; + pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl); + dcl &= ~DCL_DisDqsHys; + dcl &= ~DCL_DLL_Disable; + dcl &= ~DCL_D_DRV; + dcl &= ~DCL_QFC_EN; + dcl |= DCL_DramInit; + pci_write_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW), dcl); + + print_debug("Initializing memory: "); + int loops = 0; + do { + dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW)); + loops += 1; + if ((loops & 1023) == 0) { + print_debug("."); + } + } while(((dcl & DCL_DramInit) != 0) && (loops < TIMEOUT_LOOPS)); + if (loops >= TIMEOUT_LOOPS) { + print_debug(" failed\r\n"); + } else { + print_debug(" done\r\n"); + } + +#if 0 + print_debug("Clearing memory: "); + loops = 0; + do { + dcl = pci_read_config32(PCI_ADDR(0, 0x18, 2, DRAM_CONFIG_LOW)); + loops += 1; + if ((loops & 1023) == 0) { + print_debug(" "); + print_debug_hex32(loops); + } + } while(((dcl & DCL_MemClrStatus) == 0) && (loops < TIMEOUT_LOOPS)); + if (loops >= TIMEOUT_LOOPS) { + print_debug("failed\r\n"); + } else { + print_debug("done\r\n"); + } +#endif +} + +static void sdram_first_normal_reference(void) {} +static void sdram_enable_refresh(void) {} +static void sdram_special_finishup(void) {} + diff --git a/src/pc80/mc146818rtc_early.c b/src/pc80/mc146818rtc_early.c new file mode 100644 index 0000000000..1d268f0482 --- /dev/null +++ b/src/pc80/mc146818rtc_early.c @@ -0,0 +1,84 @@ +#include +#include + +static unsigned char cmos_read(unsigned char addr) +{ + outb(addr, RTC_BASE_PORT + 0); + return inb(RTC_BASE_PORT + 1); +} + +static void cmos_write(unsigned char val, unsigned char addr) +{ + outb(addr, RTC_BASE_PORT + 0); + outb(val, RTC_BASE_PORT + 1); +} + +static int cmos_error(void) +{ + unsigned char reg_d; + /* See if the cmos error condition has been flagged */ + reg_d = cmos_read(RTC_REG_D); + return (reg_d & RTC_VRT) == 0; +} + +static int cmos_chksum_valid(void) +{ + unsigned char addr; + unsigned long sum, old_sum; + sum = 0; + /* Comput the cmos checksum */ + for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) { + sum += cmos_read(addr); + } + sum = (sum & 0xffff) ^ 0xffff; + + /* Read the stored checksum */ + old_sum = cmos_read(LB_CKS_LOC) << 8; + old_sum |= cmos_read(LB_CKS_LOC+1); + + return sum == old_sum; +} + + +static int do_normal_boot(void) +{ + unsigned char byte; + + if (cmos_error() || !cmos_chksum_valid()) { + unsigned char byte; + /* There are no impossible values, no cheksums so just + * trust whatever value we have in the the cmos, + * but clear the fallback bit. + */ + byte = cmos_read(RTC_BOOT_BYTE); + byte &= 0x0c; + byte |= MAX_REBOOT_CNT << 4; + cmos_write(byte, RTC_BOOT_BYTE); + } + + /* The RTC_BOOT_BYTE is now o.k. see where to go. */ + byte = cmos_read(RTC_BOOT_BYTE); + + /* Are we in normal mode? */ + if (byte & 1) { + byte &= 0x0f; /* yes, clear the boot count */ + } + + /* Are we already at the max count? */ + if ((byte >> 4) < MAX_REBOOT_CNT) { + byte += 1 << 4; /* No, add 1 to the count */ + } + else { + byte &= 0xfc; /* Yes, put in fallback mode */ + } + + /* Is this the first boot? */ + if ((byte >> 4) <= 1) { + byte = (byte & 0xfc) | ((byte & 1) << 1); /* yes, shift the boot bits */ + } + + /* Save the boot byte */ + cmos_write(byte, RTC_BOOT_BYTE); + + return ((byte >> 4) < MAX_REBOOT_CNT); +} diff --git a/src/southbridge/amd/amd8111/amd8111_early_smbus.c b/src/southbridge/amd/amd8111/amd8111_early_smbus.c new file mode 100644 index 0000000000..b0b8e4955f --- /dev/null +++ b/src/southbridge/amd/amd8111/amd8111_early_smbus.c @@ -0,0 +1,108 @@ +#define SMBUS_IO_BASE 0x1000 + +#define SMBGSTATUS 0xe0 +#define SMBGCTL 0xe2 +#define SMBHSTADDR 0xe4 +#define SMBHSTDAT 0xe6 +#define SMBHSTCMD 0xe8 +#define SMBHSTFIFO 0xe9 + +#define SMBUS_TIMEOUT (100*1000*10) + +static void enable_smbus(void) +{ + uint32_t addr; + addr = pci_locate_device(PCI_ID(0x1022, 0x746b), 0); + if (addr == ~0U) { + die("SMBUS controller not found\r\n"); + } + uint8_t enable; + print_debug("SMBus controller enabled\r\n"); + pci_write_config32(addr + 0x58, SMBUS_IO_BASE | 1); + enable = pci_read_config8(addr + 0x41); + pci_write_config8(addr + 0x41, enable | (1 << 7)); +} + + +static inline void smbus_delay(void) +{ + outb(0x80, 0x80); +} + +static int smbus_wait_until_ready(void) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned short val; + smbus_delay(); + val = inw(SMBUS_IO_BASE + SMBGSTATUS); + if ((val & 0x800) == 0) { + break; + } + } while(--loops); + return loops?0:-1; +} + +static int smbus_wait_until_done(void) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned short val; + smbus_delay(); + + val = inw(SMBUS_IO_BASE + SMBGSTATUS); + if (((val & 0x8) == 0) || ((val & 0x437) != 0)) { + break; + } + } while(--loops); + return loops?0:-1; +} + +static int smbus_read_byte(unsigned device, unsigned address) +{ + unsigned char global_control_register; + unsigned char global_status_register; + unsigned char byte; + + if (smbus_wait_until_ready() < 0) { + return -1; + } + + /* setup transaction */ + /* disable interrupts */ + outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), SMBUS_IO_BASE + SMBGCTL); + /* set the device I'm talking too */ + outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR); + /* set the command/address... */ + outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD); + /* set up for a byte data read */ + outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x2), SMBUS_IO_BASE + SMBGCTL); + + /* clear any lingering errors, so the transaction will run */ + /* Do I need to write the bits to a 1 to clear an error? */ + outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS); + + /* clear the data word...*/ + outw(0, SMBUS_IO_BASE + SMBHSTDAT); + + /* start the command */ + outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL); + + + /* poll for transaction completion */ + if (smbus_wait_until_done() < 0) { + return -1; + } + + global_status_register = inw(SMBUS_IO_BASE + SMBGSTATUS); + + /* read results of transaction */ + byte = inw(SMBUS_IO_BASE + SMBHSTDAT) & 0xff; + + if (global_status_register != (1 << 4)) { + return -1; + } + return byte; +} diff --git a/src/southbridge/amd/amd8111/amd8111_enable_rom.c b/src/southbridge/amd/amd8111/amd8111_enable_rom.c new file mode 100644 index 0000000000..d6045c3620 --- /dev/null +++ b/src/southbridge/amd/amd8111/amd8111_enable_rom.c @@ -0,0 +1,18 @@ + +static void amd8111_enable_rom(void) +{ + unsigned char byte; + uint32_t addr; + + /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */ + /* Locate the amd8111 */ + addr = pci_locate_device(PCI_ID(0x1022, 0x7468), 0); + + /* Refine the address to point at the rom enable byte */ + addr += 0x43; + + /* Set the 4MB enable bit bit */ + byte = pci_read_config8(addr); + byte |= 0x80; + pci_write_config8(addr, byte); +} diff --git a/util/romcc/Makefile b/util/romcc/Makefile index ad209a5247..d2d4e7dcb9 100644 --- a/util/romcc/Makefile +++ b/util/romcc/Makefile @@ -7,12 +7,16 @@ PACKAGE:=romcc CC=gcc CPPFLAGS=-DVERSION='"$(VERSION)"' -DRELEASE_DATE='"$(RELEASE_DATE)"' CFLAGS=-O -g -Wall $(CPPFLAGS) +CPROF_FLAGS=-pg -fprofile-arcs all: romcc test romcc: romcc.c Makefile $(CC) $(CFLAGS) -o $@ $< +romcc_pg: romcc.c Makefile + $(CC) $(CFLAGS) $(CPROF_FLAGS) -o $@ $< + TESTS=\ hello_world.c \ simple_test.c \ @@ -45,6 +49,7 @@ TESTS=\ simple_test28.c \ simple_test29.c \ simple_test30.c \ + simple_test31.c \ raminit_test.c \ raminit_test2.c \ raminit_test3.c diff --git a/util/romcc/romcc.c b/util/romcc/romcc.c index 255b6d4995..561ba24110 100644 --- a/util/romcc/romcc.c +++ b/util/romcc/romcc.c @@ -17,6 +17,8 @@ #define DEBUG_SCC 0 #define DEBUG_CONSISTENCY 1 +#warning "FIXME boundary cases with small types in larger registers" + /* Control flow graph of a loop without goto. * * AAA @@ -737,6 +739,7 @@ struct hash_entry { #define HASH_TABLE_SIZE 2048 struct compile_state { + const char *label_prefix; const char *ofilename; FILE *output; struct triple *vars; @@ -9806,28 +9809,6 @@ static int tdominates(struct compile_state *state, return result; } -static int tdistance(struct compile_state *state, - struct triple *dom, struct triple *sub) -{ - int count; - struct block *bdom, *bsub; - if (!tdominates(state, dom, sub)) { - internal_error(state, 0, "dom does not dom sub"); - } - bdom = block_of_triple(state, dom); - bsub = block_of_triple(state, sub); - count = 0; - for(; bsub != bdom; (bsub = bsub->idom), sub = bsub->last) { - for(; sub != bsub->first; sub = sub->prev) { - count++; - } - } - for(; sub != dom; sub = sub->prev) { - count++; - } - return count; -} - static void insert_phi_operations(struct compile_state *state) { size_t size; @@ -9864,6 +9845,9 @@ static void insert_phi_operations(struct compile_state *state) if (!block) { warning(state, user->member, "dead code"); } + if (work[block->vertex] >= iter) { + continue; + } work[block->vertex] = iter; *work_list_tail = block; block->work_next = 0; @@ -9897,7 +9881,7 @@ static void insert_phi_operations(struct compile_state *state) front->last = front->first->next; } has_already[front->vertex] = iter; - + /* If necessary plan to visit the basic block */ if (work[front->vertex] >= iter) { continue; @@ -11972,6 +11956,7 @@ static int coalesce_live_ranges( } } next: + ; } return coalesced; } @@ -12220,6 +12205,7 @@ static struct triple *least_conflict(struct compile_state *state, } do_triple_set(&conflict->live, set->member, set->new); next: + ; } } return ins; @@ -12325,6 +12311,7 @@ static struct triple *split_constrained_range(struct compile_state *state, constrained_size = size; } next: + ; } if (constrained) { new = post_copy(state, constrained); @@ -14021,6 +14008,10 @@ static void optimize(struct compile_state *state) /* Transform the code to ssa form */ transform_to_ssa_form(state); verify_consistency(state); + if (state->debug & DEBUG_CODE_ELIMINATION) { + fprintf(stdout, "After transform_to_ssa_form\n"); + print_blocks(state, stdout); + } /* Do strength reduction and simple constant optimizations */ if (state->optimize >= 1) { simplify_all(state); @@ -15554,7 +15545,8 @@ static void print_const_val( (long_t)(ins->u.cval)); break; case OP_ADDRCONST: - fprintf(fp, " $L%lu+%lu ", + fprintf(fp, " $L%s%lu+%lu ", + state->label_prefix, MISC(ins, 0)->u.cval, ins->u.cval); break; @@ -16017,8 +16009,10 @@ static void print_op_branch(struct compile_state *state, } } - fprintf(fp, "\t%s L%lu\n", - bop, TARG(branch, 0)->u.cval); + fprintf(fp, "\t%s L%s%lu\n", + bop, + state->label_prefix, + TARG(branch, 0)->u.cval); } static void print_op_set(struct compile_state *state, @@ -16128,7 +16122,7 @@ static void print_sdecl(struct compile_state *state, { fprintf(fp, ".section \"" DATA_SECTION "\"\n"); fprintf(fp, ".balign %d\n", align_of(state, ins->type)); - fprintf(fp, "L%lu:\n", ins->u.cval); + fprintf(fp, "L%s%lu:\n", state->label_prefix, ins->u.cval); print_const(state, MISC(ins, 0), fp); fprintf(fp, ".section \"" TEXT_SECTION "\"\n"); @@ -16219,7 +16213,7 @@ static void print_instruction(struct compile_state *state, if (!ins->use) { return; } - fprintf(fp, "L%lu:\n", ins->u.cval); + fprintf(fp, "L%s%lu:\n", state->label_prefix, ins->u.cval); break; /* Ignore OP_PIECE */ case OP_PIECE: @@ -16299,7 +16293,7 @@ static void print_tokens(struct compile_state *state) } static void compile(const char *filename, const char *ofilename, - int cpu, int debug, int opt) + int cpu, int debug, int opt, const char *label_prefix) { int i; struct compile_state state; @@ -16320,6 +16314,8 @@ static void compile(const char *filename, const char *ofilename, error(&state, 0, "Cannot open output file %s\n", ofilename); } + /* Remember the label prefix */ + state.label_prefix = label_prefix; /* Prep the preprocessor */ state.if_depth = 0; state.if_value = 0; @@ -16380,11 +16376,13 @@ int main(int argc, char **argv) { const char *filename; const char *ofilename; + const char *label_prefix; int cpu; int last_argc; int debug; int optimize; cpu = CPU_DEFAULT; + label_prefix = ""; ofilename = "auto.inc"; optimize = 0; debug = 0; @@ -16396,6 +16394,11 @@ int main(int argc, char **argv) argv++; argc--; } + else if (strncmp(argv[1], "--label-prefix=", 15) == 0) { + label_prefix= argv[1] + 15; + argv++; + argc--; + } else if ((strcmp(argv[1],"-O") == 0) || (strcmp(argv[1], "-O1") == 0)) { optimize = 1; @@ -16426,7 +16429,7 @@ int main(int argc, char **argv) arg_error("Wrong argument count %d\n", argc); } filename = argv[1]; - compile(filename, ofilename, cpu, debug, optimize); + compile(filename, ofilename, cpu, debug, optimize, label_prefix); return 0; } diff --git a/util/romcc/tests/simple_test31.c b/util/romcc/tests/simple_test31.c new file mode 100644 index 0000000000..4ce77d3f6d --- /dev/null +++ b/util/romcc/tests/simple_test31.c @@ -0,0 +1,16 @@ + +static unsigned pci_locate_device(unsigned addr) +{ + addr &= ~0xff; + for(; addr <= 0x00ffff00; addr += 0x00000100) { + __builtin_outl(addr, 0x12); + } + return addr; +} + +static void main(void) +{ + unsigned long addr; + addr = pci_locate_device(0); + __builtin_outl(addr, 0x12); +} -- cgit v1.2.3