Age | Commit message (Expand) | Author |
2008-07-03 | Minor cosmetics, e.g. make stuff fit in 80 chars/line etc. (trivial). | Uwe Hermann |
2008-07-03 | Mark SST49LF040B as tested. | Carl-Daniel Hailfinger |
2008-07-03 | Mark the SST SST49LF040 as OK (tested by me), all operations (trivial). | Uwe Hermann |
2008-07-03 | flashrom: Winbond W25x80 TEST_OK PROBE READ ERASE WRITE | Peter Stuge |
2008-07-03 | Improve coreboot image detection heuristic in flashrom. It's not | Carl-Daniel Hailfinger |
2008-07-02 | flashrom: probe_flash() cleanup for better code readability | Peter Stuge |
2008-07-02 | set w39v080fa to fully supported. I'm am flashing this chip several times a | Stefan Reinauer |
2008-07-02 | flashrom: Update to TEST_OK for Winbond W39V040FA PROBE READ | Peter Stuge |
2008-07-02 | flashrom: Don't rm *~ in make clean, who knows what files that could be | Peter Stuge |
2008-07-02 | flashrom: Unknown vendor:board message can be triggered by -m too | Peter Stuge |
2008-07-02 | flashrom: Case insensitive matching of vendor:board strings in coreboot table | Peter Stuge |
2008-06-30 | First attempt to clean up SPI probing and create a common | Stefan Reinauer |
2008-06-30 | Mine AMIC flash chip needs 4 bytes RDID. This enables to use the new probing ... | Rudolf Marek |
2008-06-30 | Mine AMIC flash chip needs 4 bytes RDID. Following patch adds support for that. | Rudolf Marek |
2008-06-30 | This patch adds support for VIA SPI controller on VT8237S. It is similar with | Rudolf Marek |
2008-06-29 | Add a debug marker after ICH SPI opcode programming. | Carl-Daniel Hailfinger |
2008-06-29 | flashrom: Fix ICH7 non-SPI that broke in r3393 | Peter Stuge |
2008-06-28 | Use symbolic constants for PCI subsystem probing in flashrom. | Carl-Daniel Hailfinger |
2008-06-27 | * ICH7 SPI support | Stefan Reinauer |
2008-06-27 | indent according to development guidelines (trivial) | Stefan Reinauer |
2008-06-26 | Winbond W39V080FA: Probe and Read are OK. | Jens Kühnel |
2008-06-24 | flashrom: Test status OK for ST M50FW040 PROBE READ | Peter Stuge |
2008-06-24 | flashrom: Test status OK for Macronix MX25L8005 PROBE READ ERASE WRITE | Peter Stuge |
2008-06-24 | flashrom: Increase delay in probe_jedec() after Product ID Entry to 10ms | Peter Stuge |
2008-06-24 | flashrom: Slight restructure of SPI probe_ functions | Peter Stuge |
2008-06-22 | Some flashrom documentation fixes, and removal of duplicated info (trivial). | Uwe Hermann |
2008-06-22 | flashrom: A few changes were committed before the DoC remove, update README. | Peter Stuge |
2008-06-22 | as per Peter's suggestion. clean binary in make clean | Stefan Reinauer |
2008-06-22 | flashrom: Remove dead M-Systems Disk on Chip code | Peter Stuge |
2008-06-22 | flashrom: Update test status to TEST_OK_PREW for ST M50FLW080A and SST49LF008A | Peter Stuge |
2008-06-22 | flashrom: Some Makefile cleaning | Peter Stuge |
2008-06-21 | flashrom: Fix OBJS in Makefile to compile stm50flw0x0x.c like the others | Peter Stuge |
2008-06-21 | flashrom: Uppercase AMIC since that's what they write in datasheets. | Peter Stuge |
2008-06-21 | flashrom: Update comment to match delay change in probe_jedec() r3373 | Peter Stuge |
2008-06-21 | flashrom: Update test status for Atmel AT29C020 and SST29EE010 | Peter Stuge |
2008-06-21 | flashrom: Increase delay in probe_jedec() to 2ms to reliably detect AT29C020 | Peter Stuge |
2008-06-20 | flashrom: Show expected and read byte on verify failure. Trivial. | Peter Stuge |
2008-06-18 | flashrom: Add support for AMIC Technology A49LF040A and do not probe W29EE011... | Jens Kuehnel |
2008-06-18 | flashrom: Force read unknown flash chips | Peter Stuge |
2008-06-13 | flashrom: Board enable and autodetection for GIGABYTE GA-7VT600 | Peter Stuge |
2008-06-11 | flashrom: Add support for Amic Technology A29040B flash chip. | Peter Stuge |
2008-06-11 | flashrom: Board enable and autodetection for BioStar P4M80-M4. | Peter Stuge |
2008-06-08 | Changes Makefile generation so that recursive "make" calls read | Pierre Pronchery |
2008-06-07 | Add dump support for Winbond (NSC) PC87427. Dumps available from real hardware. | Tom Sylla |
2008-06-03 | Ward writes: | Peter Stuge |
2008-05-28 | abuild: fix gnu getopt detection (trivial) | Stefan Reinauer |
2008-05-27 | Revert r3357 and fix it as intended to (forgotten header commit instead of typo) | Mart Raudsepp |
2008-05-27 | Fix typo introduced in r3356 that breaks build (trivial). | Mart Raudsepp |
2008-05-27 | flashrom: MX25L4005, S25FL016A, W39V040B, W39V080A, SST49LF008A tests. | Peter Stuge |
2008-05-27 | not sure why this ever worked. Add --xml / -x to the supported options (trivial) | Stefan Reinauer |
2008-05-27 | sync latest version of abuild (0.6) (trivial patch) | Stefan Reinauer |
2008-05-27 | Mark SST49LF004A/B as tested (trivial). | Mart Raudsepp |
2008-05-26 | Mark the following chips as tested (trivial). | Uwe Hermann |
2008-05-22 | A bunch of cosmetic improvements (trivial). | Uwe Hermann |
2008-05-22 | Mark more chips as tested (all operations), tested on ASUS P4B266 (trivial). | Uwe Hermann |
2008-05-22 | Add support for the ASUS P4B266 board. | Uwe Hermann |
2008-05-22 | Add support for Amic A25L40P SPI flash. | Rudolf Marek |
2008-05-22 | Changes to make flashrom compile (and work) on FreeBSD. | Andriy Gapon |
2008-05-21 | Myles reported SST49LF080A status -> TESTED_PREW | Peter Stuge |
2008-05-17 | Initial support for the Intel 82845 (Brookdale) and ICH2 (trivial). | Uwe Hermann |
2008-05-17 | flashrom: Support Pm49FL004/2 Block Locking Registers | Nikolay Petukhov |
2008-05-16 | I looked at the datasheet and erase_sector_39sf020() is totally and | Carl-Daniel Hailfinger |
2008-05-16 | ICH8 and ICH9 have an almost identical SPI interface, only the location | Carl-Daniel Hailfinger |
2008-05-16 | Add support for the Atmel AT25DF321 SPI flash (tested). | Dominik Geyer |
2008-05-16 | Add support for SPI chips on ICH9. This is done by using the generic SPI | Dominik Geyer |
2008-05-16 | Enable IT8716F LPC-to-SPI write cycle translation in flashrom if the | Carl-Daniel Hailfinger |
2008-05-15 | Print detailed status register information for SST25VF series flash. | Carl-Daniel Hailfinger |
2008-05-15 | Lots of new SST flash chip IDs. Only a subset has been added to | Carl-Daniel Hailfinger |
2008-05-15 | Add support for the JEDEC RES (Read Electronic Signature and Resume from | Carl-Daniel Hailfinger |
2008-05-14 | Some NSC Super I/Os can have their config port at 0x15c (trivial). | Uwe Hermann |
2008-05-14 | Cosmetics, whitespace, coding style, partially ident-aided (trivial). | Uwe Hermann |
2008-05-14 | add ICH7-M and ICH7 DH to inteltool (trivial) | Stefan Reinauer |
2008-05-14 | Add more infrastructure for flashrom ICH9 support. | Carl-Daniel Hailfinger |
2008-05-14 | fix license mentioning in manpage (trivial) | Stefan Reinauer |
2008-05-14 | trivial patch: move maintainable parts to the top and add ICH7-M DH southbridge | Stefan Reinauer |
2008-05-14 | trivial patch to fix options. Thanks to Uwe Hermann for the hint! | Stefan Reinauer |
2008-05-14 | Add the Intel 6300ESB as known chipset to the chipset struct enables. | Claus Gindhart |
2008-05-14 | Fix crash caused by division by zero for unknown flash chips. | Carl-Daniel Hailfinger |
2008-05-14 | Check the JEDEC vendor ID for correct parity. Flash chips which can be | Carl-Daniel Hailfinger |
2008-05-14 | Example on how to add other chipsets to inteltool. ICH/ICH0, ICH4(-M) and ICH7 | Stefan Reinauer |
2008-05-14 | Add lots of ATMEL SPI flash chips to flash.h. | Carl-Daniel Hailfinger |
2008-05-13 | flashrom: Move all IT87xx specific SPI routines from spi.c to a separate | Carl-Daniel Hailfinger |
2008-05-13 | Add new revised inteltool that dumps all kinds of chipset information and dro... | Stefan Reinauer |
2008-05-13 | flashrom: Move the SPI #defines from spi.c to spi.h | Carl-Daniel Hailfinger |
2008-05-13 | Change the SPI parts of flashrom to prepare for a merge of | Carl-Daniel Hailfinger |
2008-05-12 | MX25L3205 and W25x40 have been confirmed to probe/read/erase/write OK | Carl-Daniel Hailfinger |
2008-05-12 | Add SST39VF512, SST39VF010, SST39VF040 support to flashrom. The SST39LF | Carl-Daniel Hailfinger |
2008-05-10 | Improve flashrom SPI abstraction, second step. | Carl-Daniel Hailfinger |
2008-05-10 | flashrom: Rename generic_spi_*() functions to spi_*() | Peter Stuge |
2008-05-08 | Add support for dumping ITE IT8718F EC registers (trivial). | Uwe Hermann |
2008-05-08 | Don't split up register list in two blocks, otherwise "Register dump:" | Uwe Hermann |
2008-05-08 | flashrom: Probe for up to 3 flash chips. | Claus Gindhart |
2008-05-07 | Fix a typo in lbtdump output (trivial). | Ed Swierk |
2008-05-03 | flashrom: Add a tested bitmap field to the flash chip table. | Peter Stuge |
2008-04-29 | flashrom: Enable ROM decode range to 1MB for vt8237r | Bari Ari |
2008-04-28 | The generic jedec.c does not work for the ST M50FLW flash | Claus Gindhart |
2008-04-28 | flashrom: Handle NULL probe, erase and write function pointers in the | Peter Stuge |
2008-04-24 | Flash pages, which where excluded from updating using the exclude or the | Claus Gindhart |
2008-04-23 | Detect SMSC SCH5027 (trivial). | Uwe Hermann |
2008-04-07 | ST M50FW016 and ST M50FW040 support the 82802ab command set, not jedec. | Ed Swierk |