| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a sandybridge-style devicetree setting for SPD addresses,
and use it instead of runtime code in mb_get_spd_map() for all
haswell boards without CONFIG(HAVE_SPD_IN_CBFS) - effectively all
boards except google/slippy.
Patch also covers recently added Z97 boards using Broadwell MRC.
Also update util/autoport to match.
abuild passes for all affected boards.
autoport builds, but otherwise untested.
Change-Id: I574aec9cb6a47c8aaf275ae06c7e1fb695534b34
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79025
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id74ba772f105a5c36308b8e1dd803ae50840002b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I0bb1a2a84d81ec03c4468955926f3f0c94276203
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I6ffff766fb1fa91ad376c3e7e9aebe17c3288725
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83839
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1c9d1b2e336894ac48ce87e4d3390e9f9557d4f7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The current region_end() implementation is susceptible to overflow
if the region is at the end of the addressable space. A common case
with the memory-mapped flash of x86 directly below the 32-bit limit.
Note: This patch also changes console output to inclusive limits.
IMO, to the better.
Change-Id: Ic4bd6eced638745b7e845504da74542e4220554a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When fw_config is unprovisioned (eg. in the factory), devices that do
not have any probe list are enabled by default and those that have probe
list are disabled. On mainboards that support multiple types of boot
critical devices (eg. storage) through probing fw_config, all of
them are disabled when fw_config is unprovisioned. Hence the devices do
not boot to OS. Add sconfig fw_config rule `probe unprovisioned` to
enable such devices when fw_config is unprovisioned.
BUG=None
TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned.
Change-Id: I178f821e077912776d654971924d67203a7c43df
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83983
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
The USB IDs of the EHCI rate matching hubs found in these chipsets were
missing, preventing the utility from detecting connected USB devices.
Change-Id: I52858e2c75e8a3e1424a13bcddc2f5ec1216164b
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This adds some error handling to the code that adds the input segments
(e.g. kernel, cmdline, initrd...) to the output file.
Currently the compress function can fail and coreboot will still
build "successfully" leaving whoever build coreboot puzzled.
Change-Id: Ie36ad469c73cb3ff9360acc9bbe66c245e8b4a1e
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83617
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Compressing the already compressed bzImage does not yield any
fruit. If you are lucky it actually makes the image a little bit
smaller. If you are unlucky the image actually gets bigger and since the
compressing function is not checked for any errors, coreboot just builds
successfully even though the payload is broken through compression.
Before this patch you could possibly get this error during compilation:
```
E: LZMA: LzmaEnc_Encode failed 9.
```
and your linux payload would end up something like this in CBFS:
```
FMAP REGION: COREBOOT
Name Offset Type Size Comp
....
fallback/payload 0x1c9c0 simple elf 511 none
....
```
That doesn't stop coreboot from finishing the build though, since we
currently don't check for errors from the compression. That is an issue
for another patch though.
Tested:
Build and run QEMU-Q35 with Linux bzImage as payload.
Change-Id: I022982667515ce721d98af534414d9e336b5f35a
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83615
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These settings are not a must, but nice to have. The most noteworthy
setting is `sleep-inactive-ac-type`, which is set to `nothing` so that
the target doesn't go into suspend when AC is used as power supply and
it's unused for a while.
Change-Id: I9a6e3eb88427f94f504a6b991a98b1b51e11bc19
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Jan Philipp Groß <jeangrande@mailbox.org>
|
|
PipeWire is the successor of PulseAudio. So use that instead.
Change-Id: Ib557925e481ab72a31a64c4bf353a261dff4296d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83851
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Philipp Groß <jeangrande@mailbox.org>
|
|
We introduce two new functions to create region objects. They allow us
to check for integer overflows (region_create_untrusted()) or assert
their absence (region_create()).
This fixes potential overflows in region_overlap() checks in SMI
handlers, where we would wrongfully report MMIO as *not* overlapping
SMRAM.
Also, two cases of strtol() in parse_region() (cbfstool), where the
results were implicitly converted to `size_t`, are replaced with the
unsigned strtoul().
FIT payload support is left out, as it doesn't use the region API
(only the struct).
Change-Id: I4ae3e6274c981c9ab4fb1263c2a72fa68ef1c32b
Ticket: https://ticket.coreboot.org/issues/522
Found-by: Vadim Zaliva <lord@digamma.ai>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Required for building grub2.
BUG=N/A
TEST=Build successfully for 'QEMU x86 i440fx/piix4' with GRUB2 payload.
Change-Id: I97860f33dd3fde2f6db2f005d65b53cd669403e9
Signed-off-by: Harrie Paijmans <hpaijmans@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83676
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch add support for PTL platform to the `spd_tools`.
This would be useful to create dynamic SPD for fatcat variants.
BUG=b:347669091
TEST=Able to generate SPD for LP5 DRAM part.
Change-Id: I55c3f49439fb1ad961c6866f03594431e54279b9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83822
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
|
|
The parameter is not available for binutils older than 2.39. So move it
to xcompile to provide backwards compatibility for a bit.
Change-Id: I02982769ae2c356f037a747e85d155368bfcb730
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add support to specify the base and size of the replay-protected
monotonic counter (RPMC) non-volatile storage area in the SPI flash. A
later patch will use this to tell amdfwtool about the location and size
of the corresponding FMAP section.
This code is ported from
github.com/teslamotors/coreboot/tree/tesla-4.12-amd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idafa7d9bf64125bcabd9b47e77147bcffee739e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83812
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The compressing and decompressing functions return 0 on success and not
the other way around.
Change-Id: I9f8653aa805c62eb4bfc3560d7880921830c2c59
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83616
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Sandy/Ivy Bridge boards, this results in northbridge devices ending
up north of (above) southbridge devices. Which is the convention pretty
much all boards in the tree uses.
Change-Id: I9dc2ff13182ff9d92141b1736796749cea49d23a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Running autoport as root has the annoying side effect of making all
generated files owned by root. Prevent this by using sudo to invoke
log-making programs (lspci, dmidecode, acpidump, inteltool, ectool,
superiotool). These programs either need to be run as root or allow
collecting more information if run as root (lspci).
In case there's a valid reason not to use sudo, provide a prompt to
let autoport run the programs directly, as it originally did. There
might be someone trying to run autoport from an OS that lacks sudo.
Change-Id: I4bf4ddf8dd2cb930e9b7303e2ea986d8c072aa7a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The original approach to call external programs was rather convoluted
and would fall back to running executables inside the current working
directory if running them from the location specified in the code did
not succeed, swallowing any errors from the first invocation.
Rewrite the system around the `LogMakingProgram` concept, a struct to
represent a program. Each program has a name, prefixes to try running
it from and the arguments to pass to it (if any). Plus, collect error
information from failed executions, but only show it when none of the
prefixes resulted in a successful invocation.
In addition, look for programs in PATH instead of CWD: it is unlikely
that all utils will be in the CWD, but utils can be in the PATH after
one installs them (`sudo make install`). For coreboot utils, look for
them in the utils folder first as the installed versions might not be
up-to-date.
Furthermore, print out the command about to be executed, as there are
some commands (e.g. `ectool` on boards without an EC) that can take a
very long time to complete.
Change-Id: I144bdf609e0aebd8f6ddebc0eb1216bedebfa313
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82403
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to detect more issues in our code, make GCC more picky by
enabling -Wextra. Disable a couple of warnings turned on by -Wextra
temporarily in order to keep everything compiling and working for now.
The warnings may be enabled step by step later.
Since xcompiles applies to coreboot and libpayload, add Wextra here
instead of the top-level Makefile.mk.
Change-Id: I60915cb66581dc2c9b6807335fd0e214b45e76d6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83347
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
"0x1502 F81804 chipset ID, same for F81966" in
https://web.archive.org/web/20240628153609/https://github.com/torvalds/
linux/blob/master/drivers/gpio/gpio-f7188x.c
Change-Id: I6889ad8ad861465316333ff997956a05b74c5855
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83018
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename the 'domain' element of the 'domain_path' struct to 'domain_id'
to clarify that this element is the domain ID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3995deb83a669699434f0073aed0e12b688bf6e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83677
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
In accordance with the F81962/F81964/F81966/F81967 datasheet:
Release Date: Feb, 2018, Version: V0.18P [1].
[1] https://web.archive.org/web/20240707052102/http://
www.jetwaycomputer.com/download/Fintek/F81966_wdt_gpio.zip
Change-Id: Ic3418c337883538e47eb181cbe1ad2dc828e12a1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In accordance with the F81866A datasheet:
Release Date: Jan, 2012, Version: V0.14P [1].
[1] https://web.archive.org/web/20240707051837/http://www.
jetwaycomputer.com/download/Fintek/F81866_wdt_gpio.zip
Change-Id: I4367a1129fe628e7bf05d49678ea1c3718da710b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83004
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some chips (fintek [1,2]) have registers with specific selector-fields
that can affect the address space of the device (for example, switch the
register bank). At the same time, these registers contain fields that
should not change after they are configured in BIOS (for example, set
the port to 2E/2F or 4E/4F). In this case, the selector should take into
account the mask of the register fields and there is no convenient and
easy way to add this in the code in the utility. The selector-fields
should be set manually before the dump and this action is done several
times.
This patch adds an extra-selector mechanism that allows superiotool to
make a correct dump in automatic mode.
Just add a structure with an index, mask, and value for the selector
inside the superio_registers chip for the corresponding LDN to switch
the register bank:
{FINTEK_F81966_DID, "F81962/F81964/F81966/F81967", {
* * *
{NOLDN, "Global",
{0x28,0x2a,0x2b,0x2c,EOT},
{0x00,0x00,0x00,0x00,EOT},
{.idx = 0x27, .mask = 0xd, .val = 0x1} /* update extra selector */
},
{0x03, "LPT",
{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
{NANA,0x03,0x78,0x07,0x03,0xc2,EOT} /* without extra selector */
},
* * *
Tested with Fintek F81966 on Asrock IMB-1222:
- run superiotool on Ubuntu and dump the registers for the board with
the vendor's firmware;
- add the superio chip initialization code to the board configuration
in coreboot and build the project;
- boot Ubuntu on the board with coreboot and re-dump the registers;
- the register values from the board configuration code are the same
in both dumps.
Found Fintek F81962/F81964/F81966/F81967 (vid=0x3419, id=0x0215) at 0x2e
(Global) -- ESEL[27h] 0x00 (Port Select Register) --
idx 02 07 20 21 23 24 25 26 27 28 29 2a 2b 2c 2d
val 00 0b 15 02 19 34 5a 23 80 a0 f0 45 02 e3 2e
def NA 00 15 02 19 34 00 23 02 a0 00 00 02 0c 28
* * *
The changes do not affect the configuration of existing chips, which
was tested on the Asrock H110-STX motherboard with Nuvoton NCT5539D
(the dump before and after the changes are the same).
[1] CB:83004
[2] CB:83019
Change-Id: If56af9f977381e637245bdd26563f5ba7e6cbead
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83196
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As of commit 3f0bb2fb0741 (autoport: Add support for Haswell-Lynx Point
platform), autoport supports Haswell in addition to Sandy Bridge and Ivy
Bridge.
Change-Id: Iccc10441389580ff8e89c3718484d25d20970f68
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83609
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It looks like some unused artifact: The PPC64 Makefile.mk doesn't
pick it up. Also, the only other architecture using this (x86) has
linker flags there, not compiler flags.
Change-Id: I734542db9ee5b62d9a39d303d4092cd83dfef54b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
TEST=Build Pass.
BUG=b:317009620
Change-Id: Ida203a72c23b94b1848418c9727a5788df421eea
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Firmware files are packaged in various formats and very often some
Windows-only executable is used for unpacking files. These extractors
allow to deal with some of them without having to run the executables.
Change-Id: I1346807508a6baba801c4d5ed0a575b17e06c8d4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Change-Id: Idbf4f40f495fac6c08a9017bfbff25043d7fbb82
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
In order to support logging events for when we show early signs
of life to the user during CSE FW syncs add support for the
ELOG_TYPE_FW_LATE_SOL type.
BUG=b:305898363
TEST=verify event shows in eventlog CSE sync.
Change-Id: I862db946f6ff622ac83072e6bf27832732c0c318
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This tool helps take off the burden of manually decoding default
configuration registers. Using decoded values can make code more
self-documenting compared to shrouding it with magic numbers.
This is also written as a module which allows easy integration with
other tools written in Go (e.g. autoport).
Change-Id: Ib4fb652e178517b2b7aceaac8be005c5b2d3b03e
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Tested with the following devices (not exhaustive):
- Dell Latitude E7240
- Dell Precision M6800 and M4800
- Asrock Z87E-ITX
- Asrock Z87M OC Formula
- Asrock Fatal1ty Z87 Professional
Change-Id: I4f6e8c97b5122101de2f36bba8ba9f8ddd5b813a
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The value stored in `gen` is only ever `1` or `0`. Storing `1` causes
Clang to warn, since the only valid values for a 1-bit int are -1 and 0:
```
amdfwtool.c:1487:27: error: implicit truncation from 'int' to a one-bit
wide bit-field changes value from 1 to -1
[-Werror,-Wsingle-bit-bitfield-constant-conversion]
1487 | amd_romsig->efs_gen.gen = EFS_BEFORE_SECOND_GEN;
```
TEST=Rebuilt coreboot; no warning was emitted.
Change-Id: Ibd83be8302e8a717db7e7dc86a403b5648976586
Signed-off-by: George Burgess IV <gbiv@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83412
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Expose aliased PCI and PNP devices as `pci_/pnp_devfn_t` constants
in <static_devices.h>. They will be named `_sdev_<alias>` to have
a underscore prefix for consistency and to not collide with the
`struct device` objects (with `_dev_` prefix).
Change-Id: I2d1cfe12b1e7309f8235c84dd220bd090ebfe1b5
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The ioapic and ioapic_irq keywords are no longer valid tokens as of
commit e84b095d3a23 (util/sconfig: Remove unused ioapic and irq
keywords), and the associated driver had previously been removed in
commit ca5a793ec31c (drivers/generic/ioapic: Drop poor implementation).
Thus, drop them from autoport. Also, the IOAPICIRQs map that this code
relied on to generate ioapic_irq entries never seems to have been
populated by any code in any previous commit, so this appears to have
been dead code since autoport was created.
The lapic keyword was removed from sconfig in commit 15d5183e4af7
(util/sconfig: Remove lapic devices from devicetree parsers) so remove
autoport handling for it as well.
Change-Id: Icf2582594b244cf5f726c722eb3a3c12573a2662
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I5c649898218a9c5d51d18a35264e9636e3dee179
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
These fields are documented in the Alder Lake-S Client Platform SPI
Programming Guide, but they are not presented in the Skylake-LP
Client Platform SPI Programming Guide
Change-Id: I624fe5cb28aa3cb207bc48aa8d31b2a71b70bcf2
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
getopt() optarg value can be used without duplicaing if it is not
modified, as it is the case here.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ie5a27f64077af1c04b06732cd601145b8becacfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70525
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Autoport determines the mainboard vendor and board names based on DMI
entries, which sometimes doesn't result in the most obvious name. In
addition, newcomers may not be familiar with coreboot's directory
structure and have no idea where to look. Print out the absolute patch
of the generated sources once autoport finishes so that it is easier to
locate the files.
Change-Id: I4ba00484ac57355d7539fa6e36e0e6df62719f8a
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83344
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Intel chipsets from ICH7 through Lynxpoint use the same GPIO register
format and thus mainboards using using these platforms have similar
gpio.c files. Factor out the code to generate gpio.c from bd82x6x.go so
that it other chipsets added to autoport can use it.
This was originally written by Iru Cai in his Haswell autoport patch in
CB:30890; I have simply split out the code to a separate commit as it is
a separate logical change.
TEST=Generated output is identical before and after this patch when run
against logs from a Dell Latitude E6430
Change-Id: If1f506f6ad10144bd6acc42505592426bb7193b7
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83286
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id0a0de9bbbe2d3b0885bec2abea0a2022a7e1cbb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I62dc3a7fd5b8aef467fc547015f23e41d3260122
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This reverts commit 41fdb882f1f0c3cda41651c2e9c920580415a0dc.
Reason for revert: The version downloaded does not match the version
that is printed out when executing `iasl --version`. coreboot notices
that and refuses to compile QEMU-Q35 mainboard. I tested it on 2
different PCs.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3ce0c5798f14162eaa063a9a64e16e6dbbb9e468
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83296
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Ensure consistent spacing around colons in bit fields, operators,
statements and function calls.
Found by the linter (check-style).
Change-Id: I817b1dcf106cc360a7db56e5b4b0716d5419e2cd
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Macros were being printed before the SPDX header in dsdt.asl, so fix
this. Previous output:
#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB
#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB
/* SPDX-License-Identifier: GPL-2.0-only */
Change-Id: Idebdcf816911af9d262a114c86461e6fa5bfd1f8
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83187
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The generated dsdt.asl and early_init.c files contained 2 consecutive
blank lines, so remove one of them.
Change-Id: Iad74098518320c5389cb86badb8737e81dd656ae
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83186
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The southbridge/intel/bd82x6x/pch.h header was previously used to
configure a few registers in SPIBAR, but these have since been moved to
PCH code and the devicetree, making it unnecessary in mainboard.c
Change-Id: I904c95394b4fea73b4990342e647595b5f10335f
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82601
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove m4 as an explicity installed package as it will be
installed automatically by flex and bison.
Change-Id: Ic4f1c5e6f3324429914bf593047d802dfcc0cb30
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82512
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The generator inserts into the gpio.h an unnecessary blank line in
front of the list of macros in the table. Let's remove this from the
template to make the code cleaner. These changes have no effect on the
configuration of macros.
Change-Id: I1141ca630cb6d9a46be5bce2b434762ef8e6fdd0
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83003
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This error does not affect the generated files as the tests are
running [1, 2, 3]. However, this once again confirms the need to
work on updating the utility.
[1] CB:67132
[2] CB:67133
[3] CB:67134
Change-Id: I91e74d65977bd5e10589530258d1709ea33f1af5
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83002
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With commit 101098c41a ("sdm845: Combine BB with QC-Sec for ROM boot"),
most files from ipqheader were moved to the qualcomm directory.
Change-Id: I4e5136bd5ec4fd47bbd93cea2e4614fa63a3bd4e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
BUG=b:347669091
TEST=Able to build ifdtool.
Change-Id: Id261898932f11f4c9066453bce18fd889996e171
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
On x86_64 romstage can contain page tables and a page table pointer
which have an larger alignment requirement of 4096. Instead of
hardcoding it, read if from the ELF phdrs.
Change-Id: I94e4a4209b7441ecb2966a1342c3d46625771bb8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82102
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The SPDX parsers can find the SPDX identifiers in the scripts and
makefiles if they aren't broken up. This unnecessarily confuses things
when we're doing license parsing.
Change-Id: I215ed047397f342c912f1a969315fa184a124f6a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Test: Generated GPIO for ASRock Rack SPC741D8-2L2T/BCM.
Change-Id: Ib7ded47fb1c0b87ebb3cecaf3e41319ac552b797
Signed-off-by: Fabian Meyer <fabian.meyer@student.kit.edu>
Co-authored-by: Yussuf Khalil <yussuf.khalil@kit.edu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim <max.senia.poliak@gmail.com>
|
|
In preparation for introducing other yes/no prompts, factor out the
logic into a common function.
Change-Id: Iff1f0c6c665a5352013122fb791121a116c434f3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The host bridge PCI device ID can be changed by the firmware. There
is no documentation about it, though. There's 'official' IDs, which
appear in spec updates and Windows drivers, and 'mysterious' IDs,
which Intel doesn't want OSes to know about and thus are not listed.
For the sake of completeness, add the PCI device IDs for Clarkdale.
Though coreboot only supports Arrandale, both of them are Ironlake.
It is possible that the Management Engine handles changing the PCI
device ID, which would not happen when using a broken ME firmware.
Change-Id: I85a48fcf0e0e62f42fe147a5d4e2d557b2143e5b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It's in particular useful for working with variables that contain 64-bit
pointers, like CapsuleUpdateData* global variables defined by UEFI
specification.
Change-Id: I4b46b41cdc5f69d4ca189659bef1e44f64c0d554
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
These data types were added during review of CB:79080 but they weren't
added to the help message.
Change-Id: I6e79d65c80c292c3f5d2a2611e602db5cc6cf374
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82610
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
|
|
Update autoport for:
1. Commit ee126348726b ("nb/sandybridge,sb/bd82x6x: Configure USB from
southbridge devicetree")
2. Commit 94625d2aae76 ("sb/intel/bd82x6x: Allow actual USBIRx values
for native USB config")
As a side effect of #2 above, no more (broken anyway) FIXME comment
will be written for usb_port_config.
Change-Id: I3b8f44d9de19a7446e2fbcbce1aab6ec6583ebe3
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit 45e4ab4a660c (mb/*: Update SPD mapping for sandybridge boards)
changed the way in which SPD addresses are set up for SNB/IVB boards,
but autoport was not updated to reflect these changes. Result is:
register "spd_addresses" = "{0x50, 0x51, 0x52, 0x53}" # FIXME: Put proper SPD map here"
The stray quote at the end is irritating, but is hard to get rid of
without substantial refactoring of autoport's guts. But, given that
this is a FIXME comment, anyone using autoport should just drop the
comment after verifying the SPD map, so it's not a big deal.
In addition, update the corresponding section of the README, which
was horrendously out-of-date.
Change-Id: I6ad38f53afc4fafb45be7f086723cc0782a965ed
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82405
Reviewed-by: Keith Hui <buurin@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on the non-public "ITE IT8659E-I Preliminary Specification V0.7.2
(For H Version)".
TEST=Dump IT8659E configuration on the new Protectli platform
Change-Id: Ic036f8b99d5bd0107be7850fc4509da1bf020fe5
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Replace 3 unused values in the map with those found during a Ghidra
examination of MRC binary, and on hardwares running vendor firmware
(asus/p8z77-m and HP Z210 CMT Workstation).
The outgoing values were introduced in commit 216ad2170ca8
("sb/intel/bd82x6x: Add new USB currents") in anticipation for
Gigabyte GA-Z77-DS3H mainboard, but effort to land it was eventually
abandoned. Since commit xxxxxxxxxxxx, such values can be placed
directly in the port config, so there should be no hurdle should that
effort be resurrected.
Add a few #defines in pch.h to place some inline documentation
on MRC values, but more will be documented in the future when this
mapping is introduced MRC-side.
Finally, update autoport to match.
Change-Id: I195c7f627994e48f7a6e6698589504dc96248cff
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
We are going to expose ths tool to end users, and want to take
care that the presented information can be consumed by them.
The current code simply prints below warnings if we use release
binary available for end-user to download:
No firmware volume header present
No valid firmware volume was found
It will be concerning and not clear to end users, they might not
understant why it happens, what are the implications, and whether
it is something that they should worry about.
This commit tries to explain what actually happens here.
Change-Id: Iaa2678f5ae7c243811484c0567ced97ae0b3fc0a
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
|
|
Wflex-array-member-not-at-end & Wcalloc-transposed-args are
not supported when using GCC older than GCC-14.
Use them only when supported.
Change-Id: I11c1e729569c8130bd254a10454c5066a72974d6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82785
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
linux_trampoline.c generation is broken with latest crossgcc-i386
toolchain. Fix the issue to enable the building.
../cbfstool/linux_trampoline.S: Assembler messages:
../cbfstool/linux_trampoline.S:100: Error: no instruction mnemonic
suffix given and no register operands; can't size
instruction
<builtin>: recipe for target '../cbfstool/linux_trampoline.o'
failed
TEST=Build and boot on intel/archercity CRB
cd util/cbfstool/
rm linux_trampoline.c
make linux_trampoline.c
Change-Id: I7faca296f946bb4e9fd510661357925e5dcf9a6b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82704
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
<stdio.h> header is used for input/output operations (such as printf,
scanf, fopen, etc.). Although some input/output functions can manipulate
strings, they do not need to directly include <string.h> because they
are declared independently.
Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I75909ce85eed549d9094ba6f62d93656621d9f0d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82679
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic03d9ac883a92d52467d563f048446871b928712
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This excludes Devicetree blob files from the list of files to check for
superfluous whitespaces. A DTB file has recently been added in commit
33079b8174 ("lib/device_tree: Add some FDT helper functions").
Change-Id: Ic25ee5361163446370c530cccefa3bf085895d15
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82638
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds some helper functions for FDT, since more and more mainboards
seem to need FDT nowadays. For example our QEMU boards need it in order
to know how much RAM is available. Also all RISC-V boards in our tree
need FDT.
This also adds some tests in order to test said functions.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2fb1d93c5b3e1cb2f7d9584db52bbce3767b63d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81081
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie087f43e6f60df7b97d7d7b402d3540c3a0a2461
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Debian sid is too unstable at this point, and frequently ends up having
issues that cause the coreboot-sdk docker image to fail to build. Using
stable also better reflects what users will typically be running.
Also remove the parameters to quiet the apt-get install command so that
if something does break, we can see what happened more easily.
Fixes bug 536
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41b6464b024df89c114db2cdb9367c0526eb0297
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82411
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Idf5912d1fcdfabab7fe006b7e0cd4ebd25c07d09
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81683
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I03a44e0c23a925396f614f282882405dc886ba58
Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Remove the patch since it was picked from master before and thus it's
included in the new release.
Change-Id: I70408b189b974f8abaadc66f0c809a1dbe10504b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81900
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I41f56ba58af51b1ec1d7554fb35a49ccf9e778f6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Iaf2d4f579d987fbfd4187ae41c1be5cec55e0e8e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Yes, the DSDT revision is the OEM revision. But most certainly not that
of the board being ported. Because no one seems to care about the value
(newer boards inexplicably use lower values even though this represents
a date in 0xYYYYMMDD format), simply drop the incorrect comment. Should
save a bit of effort when reviewing mainboard ports: no longer will one
have to ask authors to drop the comment.
Change-Id: I9c425573e4fcb0f670a780e7821e815eadc8a2aa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The README suggests using `logs` as the folder name where autoport puts
the generated logs. Thus, add this folder to .gitignore for the sake of
convenience. Yes, people can use other folder names, but `logs` is most
commonly used.
Change-Id: I37906b43ba3e132de616184e4a5082ce00f4b230
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82398
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Pad names now matching soc/intel/xeon_sp/ebg/soc_gpio.c.
Test: Generated pad names for ASRock Rack SPC741D8 now compile.
Change-Id: Ied53b654f905add86a05bce8c2e366dea9ccf4d3
Signed-off-by: Fabian Meyer <fabian.meyer@student.kit.edu>
Co-authored-by: Yussuf Khalil <yussuf.khalil@kit.edu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82205
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enables parsing Meteor Lake inteltool output into gpio.h pad macros.
Change-Id: Iaebd51d587507e68c6f263b92dc61cb6c0411bf8
Signed-off-by: Filip Lewiński <filip.lewinski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81916
Reviewed-by: Maxim <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
Based on:
Intel Core Ultra Processor External Design Specification
Meteor Lake SOC IO Registers
Meteor Lake-U/H/U Type4 and Arrow Lake-U/H GPIO Implementation Summary
Change-Id: I7473119fa97c57cd2a1303f08f964abd0ca96270
Signed-off-by: Filip Lewiński <filip.lewinski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
If $BOARD is not all lowercase, then certain subfunctions of the
script will fail due to case-sensitive comparisons therein. To avoid
this, since all matched strings are fully lowercase, set $BOARD
to lowercase.
TEST: './crosfirmware.sh {akemi/Akemi/AKEMI}' all succeed.
Change-Id: I8ecb613a8d9384e2cccaff5183470e2e9956d0a2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This file is appended to Documentation/util.md by the util_readme.sh
script, and contains toctree entries for utilities with more in-depth
documentation than the description automatically pulled from the
description.md files throughout the util directory. As of commit
35599f9a6671 (Docs: Replace Recommonmark with MyST Parser), the syntax
for creating a toctree has changed, so update this post_util.md
accordingly.
Change-Id: Ia7ae3c513781e53512763578fd97db7e2f75e65c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Replace transitional 'pkg-config' package with 'pkgconf'.
Change-Id: I9ee895cb2ca3186c4aefbdab1fd71778bf981009
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82167
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When installing the packages, apt-get returns an error about holding
broken packages. It occurs the diffutils depends on libcurl4t64
which breaks the libcurl4.
As a solution, remove the libcurl4 from the list, and let the package
manager resolve the dependencies.
TEST=Build coreboot-sdk
Change-Id: Iabc4f74619d4462317d8adb4068e50135d89d80e
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch adds support for the new command-line option `-c` to
the ifdtool, which is able to check GPR0 (Global Protected Range)
status.
This patch also add helper function get_enabled_gprd() to get enabled
GPR0 settings. It used in enable_gpr0() and is_gpr0_protected().
Developers can use ifdtool with '-c' option to check whether GPR0 is
set to enabled or disabled in the binary file.
BUG=none
TEST=(1) > ifdtool -p mtl -E image-unlocked.bin -O image-lock.bin
...
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
...
GPR0 protection is now enabled
(2) > ifdtool -p mtl -c image-unlocked.bin
GPR0 status: Disabled
Value at GPRD offset (64) is 0x00000000
--------- GPR0 Protected Range --------------
Start address = 0x00000000
End address = 0x00000fff
(3) > ifdtool -p mtl -c image-lock.bin
GPR0 status: Enabled
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
Change-Id: I6b3af973be784200b965a68e5f6b7737cba03ed7
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This should keep new makefiles from being named Makefile.inc.
Change-Id: I4a47998e1c997b82b8a15319eae96cdc0de64e77
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81857
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
The binary hashes from GitHub releases are not stable. Use the Intel
mirror.
Change-Id: If3738b0cdab07c37ac1459a53e399e5de54435d5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80721
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The command "wget" prints some hyperlink with "%", which will be
filtered in by previous regular expression. So we need to change to
match the string with exactly 3 digits and a percent symbol.
TEST:
echo 45% | grep -o "\<[0-9]\{1,3\}%"
45%
echo 1245% | grep -o "\<[0-9]\{1,3\}%"
<empty>
echo aa% | grep -o "\<[0-9]\{1,3\}%"
<empty>
Change-Id: I6ef9e7c87fd4ee6cc707346954d91e6e3af3b939
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
<device/device.h> is supposed to provide <device/{path,resource}.h>
Change-Id: I2ef82c8fe30b1c1399a9f85c1734ce8ba16a1f88
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Add support for TigerLake Halo SoC, based on CNL profile.
Test: Convert GPIO dump from inteltool into coreboot macros for
out-of-tree TGL board.
Change-Id: I26eff225c2045edfe5836283be7b4c63f6b405e8
Signed-off-by: Alicja Michalska <ahplka19@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim <max.senia.poliak@gmail.com>
|
|
Linux kconfig has its own implementation of KCONFIG_WERROR now, so use
that. This reduces our patch count by 2.
Change-Id: I4f5f1f552e96f8ef7a4c5c0ab2ab7e2b6d798ceb
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81223
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With this, `quilt pop -a` leads to an original Linux kconfig tree,
making it easier to apply kconfig updates.
Change-Id: I771bbd0f8244cae38317bd5b1f809b74771b176f
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
When doing LTO the clang linker frontend needs to use LLD or gold. Build
LLD as that is the configuration that is best tested.
Change-Id: I3242585f8b5c3426fc6568d3dc47300164d56e3a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
When the compiler is used as a linker frontend clang tries to match the
target string with what it supports internally. If it's not sufficiently
complete it will forward linking to GCC which is not desirable. This is
necessary when doing LTO with clang.
Change-Id: Ie9356a2bc0f5b77e934cc16482d6ccb1961195dc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80730
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
