| Age | Commit message (Collapse) | Author |
|---|
|
Change gpp_configuration to GPP_CFGMODE_X1111 (was X4000), this is done
to only advertise x1 lane width for PCIe link 0:15.0.
Hide functions of PCIe links that have no slots connected. Our PCI
infrastructure does not support bridge devices that are set off
in devicetree but remain visible in the PCI hardware tree.
Change-Id: If90919634995076ab0f029baece3ba9cb8f3f3b2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8388
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Remove functions 0:12.1 and 0:13.1 that do not exist in the hardware.
Disable 0:14.1 IDE controller, as it would only be used with SATA ports
4 and 5 that are not populated with connectors in the hardware.
Disable 0:14.2 HD audio, as it is not implemented in the hardware
Disable 0:14.5 OHCI controller, as ports behind this USB1.1 -only controller
are not populated in the hardware.
Fix some alignment and whitespace.
To my knowledge these changes are not included with SAGE release
pcengines.apu_139_osp.tar.gz, but that tarball does not contain
either devicetree.cb or a pre-compiled static.c file so I cannot tell
for sure.
Change-Id: Idcb8e76645fce7e89a37ff7007531b668f472131
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8328
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Interrupts from USB controllers 0:16.0 and 0:16.2 were not routed
in PIC mode. The only affected peripheral was the SD card reader.
This patch is not included with SAGE release pcengines.apu_139_osp.tar.gz.
Change-Id: Ie7f0fa3751b46cca0132bd6dcada3628c6a45efb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8327
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Some GPIO pins are shared with (disabled) PCI bridge 0:14.4.
As our PCI subsystem currently does not configure PCI bridges that are
marked disabled, but remain visible in the hardware, we cannot mark 0:14.4
disabled in devicetree just yet.
Change-Id: Ibc5d950662d633a07d62fd5a5984a56d8e5f959d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8326
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
While we cannot recreate exact copies of PC Engines APU1 firmware images,
I shall upstream the vital changes for coreboot from the following tarballs
SAGE has published to meet GPL:
SageBios_PCEngines_APU_sources_for_publishing_20140405_GPL_package.tar.gz
md5sum: ce5f54723e4fe3b63a1a3e35586728d4
pcengines.apu_139_osp.tar.gz
md5sum: af6c8ab3b85d1a5a9fbeb41efa30a1ef
The patch here adds Kconfig, Makefile.inc and devicetree.cb files to
match 2014/04/05 release tarball config.h and static.c files.
Change-Id: Id61270b4d484f712a5c0e780a01fc81f1550b9ad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8325
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Drop persimmon customization for superio, azalia, PCI-e reset etc.
Change-Id: I35f49ca67e6cc2df826f24e5a4bb3db5bb6f711e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8324
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Some GPIO pins are shared with PCI bridge 0:14.4.
As our PCI subsystem currently does not configure PCI bridges that are
marked disabled, but remain visible in the hardware, simply setting 0:14.4
disabled in the devicetree does not work here yet.
Change-Id: Ib9652e12a888e1d797d879d97737ba4101b7029a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8495
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
|
|
The goto statement skipped all the code that is necessary
to fill in the data structures that are read right after
the jump.
Since there doesn't seem to be useful data, why write these
ACPI objects in the first place?
Change-Id: I1d06c11a7a31517b81e54159355d5c27e3cc3735
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8507
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
xgifb_probe() doesn't own the object it tries to free
in its error code path, potentially leading to a
double-free in xgi_z9s_init().
Since we don't actually implement free, it doesn't matter
too much, but let's keep things proper.
Change-Id: I70c8f395fd59584664040ca6e07be56e046c80fc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/8506
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The change in commit 5636237 allows */cpu/amd/agesa/* to be removed.
TEST: Booted the amd/parmer board.
Change-Id: I8d2d2639f8e5f3b1dd58be96be98db0eff7b268f
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8505
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This copies a change made in commit 1cc3338 that allows alloc_cbmem()
to be called only in ramstage. This will allow the */cpu/amd/agesa/*
field to be removed from the list of illegal_globals EXCLUDE_FILEs.
TEST: Booted the amd/parmer board.
Change-Id: I2d4b5352815aae090ffce7b83e487f7c0a4d0c88
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8504
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
That's just how we roll.
Change-Id: I47ef62476703fdf2544d9cd77c30ae12452afeae
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/8514
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
If function cmos_init() was called with parameter invalid
set, this indicates, that the caller has found a power
loss event in the RTC registers. In this case, we need to
load the default date and time because it can be corrupted.
Change-Id: Ib8d58a14da0182ceb8167e67440a0f1ea2a20eb7
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8373
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Fan 2 and Fan 3 were inexplicably set to zero after device
setup.
Change-Id: I37945745dbfaf33eb28808d85cdf75dca401e44b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8520
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Without this change the builder would fail with the complaint
that there was a global static variable in romstage. alloc_cbmem()
is only called in ramstage. The alternative was to add
*/cpu/amd/pi/*.romstage.o to the list of illegal_globals
EXCLUDE_FILEs in arch/x86/init/romstage.ld.
TEST: Booted the amd/lamar board.
Change-Id: I5167910ff790a3152a4ad8e5af0a4a3b17894f0f
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8256
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This adds the AMD Family 15h model 30 CPU.
S3 suspend/resume currently is not supported.
Tested on the amd/lamar platform.
Change-Id: Ifef55747a5d715b17937fc75ab9d35945b59f0e6
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7248
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The coreboot I²C API was completely reworked in commit
* cdb61a6 i2c: Replace the i2c API.
For the allwinner I²C driver, wrappers to the old API were provided
on a "best guess" basis. Replace these wrappers with proper
transaction handling based on the i2c_seg API.
Change-Id: Ibdda3b022ce4876deb2906e17a5a0ca9e939aada
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8431
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Originally, axp209_(read|write) accessors relied on i2c_(read|write)
to return the number of bytes transferred. This was changed in
* cdb61a6 i2c: Replace the i2c API.
to return an error code or 0 on success. This caused the AXP209 check
to fail. Fix the accessors to account for this new behavior.
Change-Id: Ib0f492bd52260d224d87f8e8f2d3c1244d1507df
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8432
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Kconfig variable is not implemented.
Also fix broken abuild.
Change-Id: I569f44e97abc570158472ddbd0f890315233f8a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8494
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
We only need one of devx and dev. This function should be called
with dev already adjusted if link_num > 3.
Change-Id: I7166bbb88143bc28802c9530c4da16db67868d8e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8351
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I9a24f9897115ce37ee11ca41c8b74142c95fc534
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8350
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I198f2ad321e1a8b6d932f5624b129e312e36a309
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8349
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I6ce784fd9e7a6876a37c910c503fafa3a17bf96f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8348
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Id8fc1d7d8a23238e6848cd2cf4270d782e90a7d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8347
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iee51c51b662d1f5e3d918d1e5b961f06c6b99df6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8346
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I2c2d586fc572b78b5019f8ef2714959799a8d2a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/8480
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
These settings are specific to the SteppeEagle SOC and should
be made in its northbridge code rather than the CPU code.
Change-Id: I1a231f95225e1414b0cbc026a2a7b7797bd91fca
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8254
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
They seem to have been copy-pasted during the backport from sandybridge.
Change-Id: I2277bb90e6da2676b31eb2665b7c15f074e3d4bf
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8295
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
Change-Id: Idf37d51c6b53ae85dc96fb609531ceda06ec948c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8470
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
It's not very useful to try to link a host tool into
the bootblock image.
Change-Id: Id3b6496c061d41184fbb516d56746855b455b0c3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/8473
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Note that the limit is not set in the devicetree.cb which use native
sandybridge raminit, as it is not needed. When that isn't set, it's
automatically set to zero, and when we find that, we automatically
return the default limit. Thus behavior isn't changed for any board.
Change-Id: I447399eea71355612b654710a56f3a0077c2f7f9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8476
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We can successfully bring up systems if timC calibration fails, as has
been demonstrated with google/butterfly. As a result, do not die(),
but simply print a message and continue in the hope that we may be
able to boot.
Change-Id: I49ec80324f63b2d45ae8f61c5c26454acb9c232f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8475
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Builds with cbootimage.
BUG=None
BRANCH=None
TEST=build test
Original-Change-Id: I796f171031bacf17106878d4a554e8f1cbfe93f8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203145
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 4778ae4d08a25306407f0fd2fe47976d63463f9d)
Increase the bootblock area for the larger BCT that is generated by
the coreboot version of the cbootimage tool.
Change-Id: I42b8208504bf4936a9fa14f820d665590f6a3754
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8413
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Changes might be required for .bct files as we get to know more.
Pulling in files from mainboard nyan for now
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Change-Id: Iaf81a384af0469c77940cf7309ba68018110b5eb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/203144
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit d3633f8cf8c01a07b54ceef2dd7bf7a64afd7c76)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8412
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This patch is to perform software triggered RAM re-repair in
the warm boot path.
"RAM" actually refers to the CPU cache here (yeah, I know, but that's
how the manuals call it). This is some magic hardware thing that must be
done every time after applying power to the main CPU cores or their
cache may have random failures in some very rare cases.
Also, note that this file isn't built in coreboot proper, but is a
companion binary for kernel. It resides here for safe keeping.
BUG=chrome-os-partner:30430
BRANCH=nyan
TEST=run suspend_stress_test on nyan.
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Change-Id: I540f8afbffa323d1e378cb6ba6a20be4afd08339
Original-Reviewed-on: https://chromium-review.googlesource.com/207422
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
(cherry picked from commit f06c413c42819f8f75d9b0fecde02b82583f1d2a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I151ce943ce8623e46cc55f890bbd6fc641cc2b98
Reviewed-on: http://review.coreboot.org/8416
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is to perform software triggered RAM re-repair in
the cold boot path.
"RAM" actually refers to the CPU cache here (yeah, I know, but that's
how the manuals call it). This is some magic hardware thing that must be
done every time after applying power to the main CPU cores or their
cache may have random failures in some very rare cases.
BUG=chrome-os-partner:30430
BRANCH=nyan
TEST=run cold reboot test on nyan.
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Change-Id: I87869431e80e7bc66948a7f67f35e5b907993765
Original-Reviewed-on: https://chromium-review.googlesource.com/207362
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
(cherry picked from commit d999f5ecc31d90c8dce1dd91533bc34ffd3c03f2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iaee1d7f9fa8856f26d7ead70eaeeff9d80dbb181
Reviewed-on: http://review.coreboot.org/8415
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Based on TRM, cpu clock enabling and reset vector setting should
all be done properly before ungating cpu power partition. Otherwise,
with current code, a race condition could occur where cpu starts but
reset vector has not been set.
BUG=chrome-os-partner:30064
BRANCH=none
TEST=run nyan_big reboot test. No issue is experienced.
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: I571e128693bb2763ee673bd183b8cf60921dc475
Original-Reviewed-on: https://chromium-review.googlesource.com/206682
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
(cherry picked from commit 106480ff32406c899a24544fdfab858db5afd1d9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3da6018dd68e4c15d2c58db566a9745b0b26c365
Reviewed-on: http://review.coreboot.org/8414
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I07f4190ab73ec3468e3738be14d64468e2a05720
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8340
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
All code must agree on PCI enumeration for the CK804 device,
define these only once. The definition in enable_usbdebug.c was
different and was assumed incorrect.
Change-Id: I7d25c145afbad41db81a6b9b4f3956ad50fcb9f2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8339
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This reverts commit b8716879917c420d9e7e2618e48b1411a0c6bcc8.
Use of #ifndef here makes it error-prone and hides errors.
Change-Id: I13a999250c80adedb6b3fd4963a862ff106750f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8338
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ia4829447835dd26381185c586eaac210dc0591d9
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8463
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This patch allows the user to set a maximum HT link frequency in
NVRAM, paralleling a similar option available in the proprietary
BIOS on some mainboards.
Change-Id: Iba3789262eefa52421e76533cbf14d9da2ef1de8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8462
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The existing code generated invalid ACPI processor objects
if the core number was greater than 9. The first invalid
object instance was autocorrected by Linux, but subsequent
instances conflicted with each other, leading to a failure
to boot if more than 10 CPU cores were installed.
The modified code will function with up to 99 cores.
Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8422
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: I48d2cda330d8e8f1e58bc670e4e898479216e576
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8461
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I19d6b56e3ac5e6e7946648b97c86a223b748e3bd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8460
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Icebc12d8f83494150a7bdd3adcc168d7b48b2e68
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8458
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iccad79c142a7fcf89dd0fbebe8c07ad9ef019e91
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8459
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This removes spurious K8 options and adds appropriate K10 options.
File content taken from the functional K10 ASUS KFSN4-DRE board.
Change-Id: I237bb139056f39f21416268cb52d24c5bc5f111d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8456
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I6ccf44645dabf8ac3674f40d3c5cbcf694aa6237
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8441
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
All settable memory controller options are now controlled by NVRAM,
making the Kconfig options irrelevant.
Change-Id: I9b2c8798d830e5c41bb9a108514e60d784d2ebc5
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8452
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
K10 processors cannot operate at full memory speeds when more than a
certain number of DIMMs are installed on a specific channel. The
allowed DIMM numbers and speeds are listed in the BKDG; this patch
implements the appropriate frequency reduction to ensure stability.
Change-Id: I8ac5b508915e423d262ad36c49de1fe696df2ecd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8435
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
These values were originally hard-coded in the AMD MCT wrapper.
Change-Id: I12056d38d5348e70a44c192385e22e715e207792
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8454
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ie7a73a5962e61585ebc427005e72715c8da4e0ac
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8451
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iaece709f521aaf6689b71bc0c71606847c3e1e4e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8439
Tested-by: build bot (Jenkins)
|
|
In specific configurations, such as homogeneous supercomputing systems,
changeable NVRAM parameters are more of a liability than a useful tool.
This patch allows a coreboot image to be compiled that will always set
the NVRAM parameters to their default values, reducing maintainance
overhead on large clusters.
Change-Id: Ic03e34211d4a58cd60740f2d9a6b50e11fe85822
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8446
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ic86104d6e7811b0bda9279411db84f464324994a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8450
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Id837445f346e9ab0218ccca12794b519a8a71c0d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8449
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This fixes errors of the form:
error: 'Dct0MemSize' may be used uninitialized in this function
Change-Id: Ifc853aea9050994f5641c57a081aa0667331c995
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8455
Tested-by: build bot (Jenkins)
|
|
TEST: Boot with corrupted CMOS and make sure console level defaults
to SPEW, instead of 0, and that cbmem console is not empty.
Change-Id: I8ab2423e99bbe116f52ad27f4b20427d8557f6ff
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8379
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch allows the following memory controller settings to be overridden in NVRAM:
Memory frequency limit
ECC enable
ECC scrub rate
Change-Id: Ibfde3d888b0f81a29a14af2d142171510b87655e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8438
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Currently the coreboot console log contains messages in the following
form.
Show all devs...Before device enumeration.
[…]
Show all devs...After init.
Add a space after the ellipse, so it’s better readable and it does not
look like a newline is missing.
Show all devs... Before device enumeration.
[…]
Show all devs... After init.
Change-Id: Ifa2a37b8d60c433c219df7533a79fced03b6271a
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8424
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On x86, change the type of the address parameter in
read8()/read16/read32()/write8()/write16()/write32() to be a
pointer, instead of unsigned long.
Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7784
Tested-by: build bot (Jenkins)
|
|
The default linking behavior of ramstage was changed in commit
* 8f99378 ARMv7/Exynos: Fix memory location assumptions
However, that commit failed to address the issue of maintaining
linking behavior on non-Exynos chips. As a result we ended up
linking ramstage at address 0, which is outside of SDRAM.
Explicitly link ramstage at SDRAM base for A10. This patch does not
address the issue on other chips that were broken by commit 8f99378.
Change-Id: I90fa41d3eabf110b5ab24c31b78ac6d0474e4083
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
PCIe root ports on devices 0:15.0 to 0:15.3 should at first all
appear visible in hardware. The real configuration will be done by
vendorcode once we call sb_Before_Pci_Init().
Change-Id: I01a46c630aa6d55a94af45da6b78c97df7553e4f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8387
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This has nothing to do with SATA controller. We only need to
fill the table with defaults before we parse devicetree for
changes to device configuration.
Change-Id: Ic4b28b5992ec9bfdf252f61b1c86b0162243cc95
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
If devicetree.cb has GPP port off, really disable it before even
trying to do link training.
Change-Id: I810945da28d86768e88249dc4d29a50ad9f9959b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8385
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
A set of pins can be configured for GPIO or (parallel) PCI bridge use.
When requested configuration is 0:14.4 enabled, register programming
must be done before attempting to enumerate devices behind the bridge.
When requested configuration is 0:14.4 disabled, we must not even
temporarily enable pins for PCI use to avoid spurious GPIO state changes.
As our PCI subsystem currently does not configure visible PCI bridges
that are marked disabled, we cannot mark 0:14.4 disabled just yet but
need to handle pcengines/apu1 as a special case.
Drop related dead code.
Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8329
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
These sb800_enable() messages without newline mess up the log.
Change-Id: I1689b68702e08e2a287083835f310f52f495c451
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8384
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Kconfig variable is not implemented.
Change-Id: I546a1001847e7b1002f96baf49ed3301852a6894
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Keep the slower HyperTransport configuration for a possible reference
in fam15 boards.
Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8344
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I098d1238cda16060c3566f242443007cdaf9bd82
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5106
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Probing is done by reading the ID register and comparing it to a known
value. When there is a mismatch, print an error.
Change-Id: I36fb1fe9b56e97660556dcb27be25bfe5129ad73
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8433
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The actual key values were not added in commit 17ace8255.
TEST: amd/lamar shows the correct result.
Change-Id: I8f20e3d0ce83dd87b6c233ee98c3e77a6b7c1b03
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8375
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: Marc Jones <marc.jones@se-eng.com>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: Ic8f5d91f6635ef12845ab049a20df5a6e33bbf55
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203142
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit ecf7822812d8745af74eaf135b7b806c23ef51a2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I79abbded94376ba90a8c729aaf856ce303509e48
Reviewed-on: http://review.coreboot.org/8410
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: Marc Jones <marc.jones@se-eng.com>
|
|
This combines the Avalon and Bolton tables of text descriptions
of the IRQ assignments. It also corrects the text string for
the SD controller on Bolton.
Test: This was verified on amd/lamar.
Change-Id: Ibc74641eb4e1f7581f26d260ba3d33201bcbf5e7
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8374
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Verstage isn't included yet, but we need to have
the Kconfig option for toolchain.inc to pass.
Change-Id: I7fae73cd3b77fd347398221489caf745274701eb
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8409
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ib83ec5c397fdef5aa9e3376f1c0072cfa2f74fa6
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8425
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add two macros to gpio.h which allow to setup 20K
pull-up or pull-down resistor for a given GPIO.
Change-Id: Ie3bc4d40df588ed682cc692e2a80527b9e62a483
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8402
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Two source files were accidently marked executable. Switch them back to
mode 644 (rw-r---r--)
Change-Id: Ic96f6e5e9a05cbffb65cdfb627023d04d3866dc9
Signed-off-by: Stefan Reinauer <stepan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8426
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Change-Id: I1e4c5c807d4a78844a40083178b6f96ffeb3659e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8361
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
SeaVGABIOS supports both the coreboot linear framebuffer and native EGA
text mode. To use SeaBIOS interactively on standard VGA hardware a VBIOS
is needed; SeaVGABIOS is one such option.
TEST: Booted KFSN4-DRE with XGI Volari Z9s and SeaVGABIOS. Was able to
interact with SeaBIOS and comboot menu, then booted Linux successfully.
VGA display was continuously usable from power on to Linux login.
Change-Id: Id4bd4cb5cece9114457633832c5f0e5280c02b47
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8368
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5101
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I32eccfb4eae176e0155c53efaf463258653eefc2
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8355
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The core count identification code in the PowerNow! _PSS
ACPI object generation code was incorrectly copied from the
model_fxx code. This code has been rewritten to properly
return the number of cores installed in the system.
Change-Id: I19567486f2de9dc2c43970addf4d91fa3d233a99
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8421
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The PCI id defaults to 1106,3230 -> via chrome 9 ...
Tested on the board.
Change-Id: I5ad91faec9c97f34c8ca48eee9198237e9ea8336
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8177
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
microcode updates are extracted from: www.amd64.org/microcode.html
Mircocode versions of 1020h and 1022h are more recent in coreboot
than inside the AMD archive.
Change-Id: I9f52accc1ebc7057890a769a059048e9982109d2
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8354
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This resolves an issue on Shanghai dual CPU configurations where
the APs on node 0 would not start. Single CPU configurations are
unaffected by this issue.
TEST: Booted KFSN4-DRE with dual Opteron 8389 CPUs and verified
proper BSP/AP start and microcode patch levels.
Change-Id: I0f5d4e0e356c6bd64e324b4399ef43b400ecab0c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8397
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Improve documentation of lock down MSRs in finalize().
Most of these aren't documented in public MSRs.
Change-Id: I4fc47bb9b71bdd7907aae65fc18b419a17ae8547
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8294
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
There is no auto-detection for AGP type and we have no hardware that
selects this. Furthermore, we treat AGP bridges just like PCI bridges,
there is no optimisation for higher bandwidth.
Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8367
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
By adding a description to ME_PATH it becomes visible
and editable in menuconfig.
Change-Id: I8c2f6a30c10f16b19f3667263db02c93688c9f8f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8398
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB
flash variants. Let's allow using the whole region instead of the
gm45 default of 1 MiB.
Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405
Signed-off-by: Michał Masłowski <mtjm@mtjm.eu>
Reviewed-on: http://review.coreboot.org/8392
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Fix a mistake that led to an invalid 0ms latency in the automatically
generated PowerNow! ACPI _PSS objects.
TEST: Booted FreeBSD and Linux and verified correct latency values.
Found-by: Coverity Scan
Change-Id: I03cecab694708136dc555ca2af7ee9a0bf9be5af
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8376
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Because the pointer to the FSP HOB list is now being saved, we can
use that to find the top of usable memory. This eliminates the need
to hardcode the size of the FSP reserved memory area.
Tested on minnowboard max for baytrail.
The HOB structure used does not seem to be present for the rangeley
or ivybridge/pantherpoint FSPs. At the very least, the GUID is not
documented in the integration guides.
Change-Id: I643e57655f55bfada60075b55aad2ce010ec4f67
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8308
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The "used" attribute was added in commit 27cf2472 which caused these
warnings to start appearing when using the standard coreboot GCC
toolchain:
{standard input}: Assembler messages:
{standard input}:96: Warning: ignoring changed section type for .car.global_data
{standard input}:96: Warning: ignoring changed section attributes for
.car.global_data
The # at the end of the section name causes the assembler to
ignore everything following the name. I verified that the resulting
binaries are the same with and without the #.
Change-Id: Iaac8042533842ed887f33895f083b613a18f496a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8301
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR.
Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8024
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
The port is based on the x230 / t530.
Tested - is in active use.
Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8359
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
cmos_init() had layers of preprocessor directives, which resulted in
a complete mess. Refactor it to make use of the IS_ENABLED() macro.
This improves readability significantly.
One of the changes is to remove in inline stub declaration of
(get|set)_option. Although that provided the ability for the compiler
to optimize out code when USE_OPTION_TABLE is not selected, there is
no evidence that such savings are measureable.
Change-Id: I07f00084d809adbb55031b2079f71136ade3028e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8306
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This macro is controversial for arches where the bits are numbered
MSb first, though we don't support such an arch. We've seen this macro
creep into our tree in different places, so provide it in one place.
Change-Id: I86cd8a16420f34ef31b615aec4e0f7bd3191ca35
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8280
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: Ib00ecdcad17fa5c0300d22378837e36d0918f9db
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8369
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
TEST: Booted KFSN4-DRE with on-board XGI Volari Z9s
Initial text from coreboot appeared, and the Linux
console was displayed immediately at the start of
kernel initialization. After boot was complete
the text mode console continued to behave normally.
SeaBIOS does not currently make use of the legacy
VGA text-mode display.
Change-Id: I2177a1d00e6f07db661dd99fe0184e2c228404d1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8360
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
