summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-10-04mb/google/brya/variants/kano: Correct MIPI camera infoLai, Jim
Correct OVTI2740 information for Kano: MIPI camera CIO port, HID and Link Freq BUG=b:200974074 TEST=Build and boot on Kano camera driver is not probed before, and it can now be probed properly after this change. Signed-off-by: Lai, Jim <jim.lai@intel.com> Change-Id: I4612c9d42cd59cba0991b763224f77b7af33770b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-02soc/intel/common: round PM Timer emulation frequency multiplierMichael Niewöhner
Round the PM Timer emulation frequency multiplier to the closest value to increase precision. Test: compared hexdumps of CML binaries for the expected result: before: 0x262E8B51, after: 0x262E8B52 Change-Id: Iafd645c248fc17943ea4be558ed7d01a301ba809 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57943 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-02soc/mediatek: add debug dump for ltiming and clock_divRex-BC Chen
ltiming and clock_div are not support for MT8173, so we separate them to weak function: mtk_i2c_dump_more_info() Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I3228c6953be5fac18a76029702b878a34c7563f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58074 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-02soc/mediatek: Fix I2C failures by adjusting AC timing and bus speedDaolong Zhu
1. The original algorithm for I2C speed cannot always make the timing meet I2C specification so a new algorithm is introduced to calculate the timing parameters more correctly. 2. Some I2C buses should be initialized in a different speed while the original implementation was fixed at fast mode (400Khz). So the mtk_i2c_bus_init is now also taking an extra speed parameter. There is an equivalent change in kernel side: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/i2c/busses/i2c-mt65xx.c?h=v5.15-rc3&id=be5ce0e97cc7a5c0d2da45d617b7bc567c3d3fa1 BUG=b:189899864 TEST=Test on Tomato, boot pass and timing pass at 100/300/400/500/800/1000Khz. Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Change-Id: Id25b7bb3a76908a7943b940eb5bee799e80626a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58053 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-02soc/intel/common/../cse: Avoid caching of CSE BARSubrata Banik
This patch ensures all attempts to read CSE BAR is performing PCI config space read and returning the BAR value rather than using cached value. This refactoring is useful to read BAR of all CSE devices rather than just HECI 1 alone. Additionally, change the return type of get_cse_bar() from `uintptr_t` to `void *` to avoid typecasting while calling read32/write32 functions. BUG=b:200644229 TEST=Able to build and boot ADLRVP where CSE is able to perform PCI enumeration and send the EOP message at post. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Id4ecc9006d6323b7c9d7a6af1afa5cfe63d933e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-02soc/intel/common/../cse: Append `_MS` with CSE_DELAY_BOOT_TO_RO macroSubrata Banik
CSE_DELAY_BOOT_TO_RO -> CSE_DELAY_BOOT_TO_RO_MS Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I4471e4553a081eaf5c8118e9600497a2b2437ac0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/dedede/var/bugzzy: Update device treeSeunghwan Kim
Update bugzzy device tree override based on the EVT schematics. BUG=b:195215785 BRANCH=dedede TEST=emerge-dedede coreboot Change-Id: Iba8e3fd24461b4228c6e6fa933c0093e3e45ee97 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-01soc/tigerlake: Make IO decode / enable register configurableSean Rhodes
This allows the one 32bit register to be configured in the devicetree in the same way that Skylake can be. i.e. register "lpc_ioe". Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib1a7f2707e565a5651ebe438320de9597f5742c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-10-01mb/google/brask/var/brask: Configure GPIOs according to schematicsDavid Wu
Update initial gpio configuration for brask BUG=b:197385770 TEST=emerge-brask coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I71026565b876739d2a08ef79940f47c476ca70a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58041 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-01soc/intel/alderlake: add power limits for Alder Lake-M 282 SKUSumeet Pawnikar
There are two different types of 282 SKU available with TDP of 15W and 12W for Alder Lake-M SoC. This patch adds support for these TDP values for 282 SKU as per document 643782. BUG=None BRANCH=None TEST=Build FW and test on adlrvp board Change-Id: I553b2362b7bf811e6bf02fd9d68f78c2caeb7398 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
2021-10-01mb/intel/adlrvp: set PL4 value dynamically for thermalSumeet Pawnikar
Set PL4 value dynamically for adlrvp board based on CPU SKUs which is detectable at runtime. These values are based on platform design specification. BUG=None BRANCH=None TEST=Build FW and test on adlrvp board On 682: Overriding power limits PL1 (4000, 28000) PL2 (64000, 64000) PL4 (140000) Change-Id: I9c0c418e2548cc7f9aa647a5ad98123b33e9f9b8 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/brya: move MILLIWATTS_TO_WATTS macro in header fileSumeet Pawnikar
Move MILLIWATTS_TO_WATTS macro in power_limit header file so all other files can use the same macro. BUG=None BRANCH=None TEST=Build FW and test on brya0 board Change-Id: Ic7ecba06b0e0a47546f7307cbfbc3ce0fc634bc3 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/intel/adlrvp: set power limits dynamically for thermalSumeet Pawnikar
Set power limit values dynamically based on CPU TDP and PCI ID of SKU. These values are as per platform design specification. BUG=None BRANCH=None TEST=Build FW and test on adlrvp board Change-Id: I8ba901fe7c978aad43b85a860c71b33bfbff2ff5 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01acpi/acpigen_dptf: Add TPCH participant for dptfSumeet Pawnikar
Add TPCH as participant for dptf control functionality. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I17c0c6cfb7804dd2caa188acc93f1a63b47cab36 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01soc/intel/common: Add PMC IPC commands for FIVR controlSumeet Pawnikar
Add PMC IPC commands information for FIVR control functionality BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I9d08bb71f7ea5da7614c68fc0ce4edf9aef59baa Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/brask: Correct SSD power sequenceEric Lai
M.2 spec describes PERST# should be sequenced after power enable. Follow up commit 658d7c5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I508f7e21888cc1938aa9a6f0066c17029773974b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/brya/var/felwinter: Correct SSD power sequenceEric Lai
M.2 spec describes PERST# should be sequenced after power enable. Follow up commit 658d7c5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I494e0edc135d730cf7bb437f0196cdf233d970d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/brask/var/baseboard/brask: Update GPIO GPP_B5 and GPP_B6David Wu
Update GPIO GPP_B5 and GPP_B6 based on schematics. BUG=b:197385770 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If83e02eec7c48b9ab41d346aa8baef7c0c881df1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2021-10-01mb/siemens/mc_ehl: Move UART_FOR_CONSOLE switch to variant levelWerner Zeh
There are currently two variants for mc_ehl where different UARTs are used for the console. Move the Kconfig switch UART_FOR_CONSOLE to the Kconfig of the variant and select the matching value there. Change-Id: I7152013a0e32ff151b92932a47953705e591dc0d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58052 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-01mb/siemens/mc_ehl: Add a new variant mc_ehl2Werner Zeh
Add a new variant of the mc_ehl board called mc_ehl2. This patch just copies the files and renames things where needed. Following patches will adapt the needed features for this new variant. Change-Id: I3ec3c091017fd66fe6a09216203cdc7c9e833846 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-10-01mb/siemens/mc_ehl1: Enable LPSS UARTWerner Zeh
Enable LPSS UART for coreboot console on mc_ehl1. Change-Id: Id995953741d48fbbe2482ff7c0ef81cac5a31207 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-10-01mb/google/brya/var/kano: Add Synaptics touchpadDavid Wu
Add Synaptics touchpad for kano. BUG=None TEST=emerge-brya coreboot and check touchpad function work. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Iec43aaa9525309d2a0e3c9822038869786f5fe66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01arch/arm64: Remove unnecessary interfacesJulius Werner
<clocks.h> and smp_processor_id() aren't used anywhere anymore. Get rid of them. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I1a8c892b066e6ac0e7cec5316633d44165344e78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-01drivers/gic: Remove unnecessary codeJulius Werner
On AArch64 platforms, GIC initialization is generally the job of Trusted Firmware and shouldn't be necessary in coreboot. Only the ancient T210 platform (which was started before we had decided on using Trusted Firmware) calls this code, and even there they have a comment wondering "do we still need this?". I'm just gonna assume (without testing because that board is ancient and I'm lazy) that they don't, and that the TF GIC initialization[1] is sufficient here. Remove this obsolete driver. [1] https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/+/3ff448/plat/nvidia/tegra/soc/t210/plat_setup.c#259 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3e9d90039dd27cb3a13f830ba21fc5cc7a70abe2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-30mb/amd/bilby: Use I2S TDM interfaceAamir Bohra
Bilby uses I2S TDM interface for audio, instead of HDA interface. Change-Id: I7c8ec02d0e63730cb54a27d3bea1d102e037823d Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: ritul guru <ritul.bits@gmail.com>
2021-09-30soc/intel/common/block/sgx: Fix typo in log messageAngel Pons
The value printed is the EPC (Enclave Page Cache) status, but the printk statement refers to it as `ECP status` instead. Fix the typo. Change-Id: Iba0a6013f2c537072dd7aa8266f2be3c5b0963ed Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58038 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-30soc/intel/alderlake: Add CPU ID 0x906a4Meera Ravindranath
TEST=Build and boot brya Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I4342c7343876eb40c2955f6f4dd99d6346852dc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
2021-09-30mb/intel/adlrvp_m: correct SSD power sequenceSelma Bensaid
This is to fix SSD detectiong failure in warm boot observed on ADL-M RVP. This patch implements the coreect power sequence: SSD_PREST Low - SSD_PWR_EN High - SSD_PREST High Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: If6f9fc17a30c28c2948809cdbade9919d4ddd6c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-30soc/intel/common/../cse: Append the time units to the HECI macro namesSubrata Banik
Append `_MS` for miliseconds and `_US` for microseconds to HECI timeout macros to improve the code readability. Change-Id: Ic7f18f07ecaabb3e43356f372d15d18be083464b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-30soc/intel/common/cse: Late sending EOP msg if !HECI_DISABLE_USING_SMMSubrata Banik
Pushing EOP msg post FSP notify helps to save ~30ms+ boot time across various warm reboots. This patch ensures late sending EOP msg when function disabling of CSE is no longer a requirement. BUG=b:200644229 TEST=Able to save ~30ms+ of boot time Without this code change EOP sending timestamp as below: 943:after sending EOP to ME 1,248,328(61,954)) With this code change EOP sending timestamp as below: 943:after sending EOP to ME 1,231,660 (2,754) Change-Id: I2b78a1c07803aacfb34dce9e94b2a05a2491aabc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-30soc/intel/alderlake: Perform `soc_finalize` at entry of BS_PAYLOAD_BOOTSubrata Banik
This patch ensures soc_finalize() is getting called at the entry of BS_PAYLOAD_BOOT boot state instead of BS_PAYLOAD_LOAD, BS_ON_EXIT. The purpose of this change is to accommodate more time to push out sending CSE EOP messages at post. BUG=b:200644229 TEST=coreboot serial log suggests soc_finalize() is getting called as part of the BS_PAYLOAD_BOOT entry. Finalizing chipset. apm_control: Finalizing SMM. APMC done. BS: BS_PAYLOAD_BOOT entry times (exec / console): 21 / 15 ms Change-Id: I8632eca057255d7f4a38b64fd17c1f3d84123051 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-09-30soc/intel/common/../cse: Perform D0I3 bit reset/set prior sending EOPSubrata Banik
Prior to coreboot sending EOP messages during post, it's important to ensure that CSE is not in Idle state. In case CSE is in Dev Idle state (which means D0I3 bit is set), reset this bit before sending EOP command. This patch ensures coreboot has provision to send CSE EOP messages even after the FSP Notify phase without any delays waiting for the device to respond or timeout. BUG=b:200644229 TEST=Able to send CSE EOP message even after FSP Notify phase. Attempting CSE EOP msg sending post FSP notify without this code change causes `timeout` issue as below: BS: BS_PAYLOAD_LOAD exit times (exec / console): 171 / 0 ms Finalizing chipset. apm_control: Finalizing SMM. APMC done. HECI: Sending End-of-Post HECI: timed out reading answer! HECI: Failed to receive! HECI: receive Failed HECI: EOP send/receive fail ERROR: Failed to send EOP to CSE, 2 cse: CSE status registers: HFSTS1: 0x90000255, HFSTS2: 0xf10516 HFSTS3: 0x20 VB2:vb2api_fail() Need recovery, reason: 0x31 / 0xc Saving nvdata board_reset() called! full_reset() called! Attempting CSE EOP msg sending post FSP notify with this code change is `successful` as below: BS: BS_PAYLOAD_LOAD exit times (exec / console): 170 / 0 ms Finalizing chipset. apm_control: Finalizing SMM. APMC done. HECI: Sending End-of-Post CSE: EOP requested action: continue boot CSE EOP successful, continuing boot Change-Id: Iae1bc52e94b08f97004424ea0c147d6da8aca6e2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-30soc/intel/common/../cse: Create APIs for CSE device state transitionSubrata Banik
This patch ensures APIs that are responsible for CSE device state transition between active to idle and vice-versa are available publically for other modules/boot stages to consume. BUG=b:200644229 TEST=Able to build and boot ADLRVP-P. Change-Id: Ia480877822d343f2b4c9bf87b246812186d49ea3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-30mb/intel/adlrvp: Update Rcomp target value for DDR4 RVP SKUSubrata Banik
Update to recommended Rcomp drive strength value for DDR4 as per MRC team's input. Additionally, add space around the `targets` array. Change-Id: Ied63913db94b2e52ab394a66c70f7edfd507d99a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-30mb/google/brya/variants/gimble: Correct SSD power sequenceMark Hsieh
M.2 spec describes PERST# should be sequenced after power enable. BUG=b:201512872 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ie164ddb29f947e190fa87b31165e3c84b07926e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58034 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29soc/intel/cannonlake: Guard acpi_fill_ssdt assignment with HAVE_ACPI_TABLESTim Wawrzynczak
Change-Id: I3677b4e545599d00a4ba16464836834febc2d1a5 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58024 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29soc/intel: Drop unnecessary `select REG_SCRIPT`Angel Pons
These platforms no longer use reg-script. Drop unneeded select. Change-Id: I8fc4dc29d25dffbf9ed1947d0ff013b2fae0faaf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/common/block/smbus: Drop reg-script usageAngel Pons
Using reg-script just to read-modify-write some registers makes no sense. Replace reg-script usage with regular register operations. Change-Id: I87d1278360a231cbe5b5f825ad9a448e59e63ea2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/skylake: Drop reg-script usageAngel Pons
Using reg-script just to read-modify-write some registers makes no sense. Replace reg-script usage with regular register operations. Change-Id: Ib3c83131c30fd02c579b910cfad6843eb28ba8f1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/{cnl,jsl,tgl,ehl,adl}: rename PMC device init/enable callbacksMichael Niewöhner
The current names of the PMC init/enable callbacks are very confusing. Rename them. Change-Id: I69f54f3b4e1ea9a9b4fa5c8dd9c0d454d7cd1283 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-29google/trogdor: Always initialize eDP bridge I2C QUP firmwareJulius Werner
In CB:52662 when MIPI display support was added, we accidentally changed the code flow for eDP displays such that i2c_init() will no longer be called when display_init_required() is false. This is a problem because on this platform, i2c_init() does not just prepare the I2C controller for firmware use, it also loads firmware to the controller that makes it behave like an I2C device in the first place -- a step that the kernel cannot later do on its own if the firmware didn't already do it. Skipping this initialization means the I2C controller becomes unusable to the kernel. This patch fixes the issue by making the i2c_init() unconditional again. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ie4546c31d87d91113eeef7dc7a18599a87e6d6eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58026 Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29soc/intel: Rename GNVS struct member to match ASLAngel Pons
Rename the `ecps` GNVS struct member to `epcs` to match the name in ASL. Change-Id: I1f6b97309eea75e7dbb4e5e664660df05ec0845e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29herobrine: Initialize SAR sensor QUPShelley Chen
Initializing SAR sensor (QUP2, address 0x988000) BUG=b:198456205 BRANCH=None TEST=Boot into kernel and make sure no i2c errors for 0x988000 in dmesg Change-Id: I75b0e9173d4c49b5e7308158a678964d6637b225 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-09-29mb/google/herobrine: Change preprocessor to C codeShelley Chen
BUG=b:182963902 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -c max -B Change-Id: I10f8a9682200b883474dc385331c5dae84cbdb08 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-09-29herobrine: Add fingerprint power sequencingShelley Chen
For Herobrine variants that include a finger print sensor, we will need to power sequence it. We are using the same FP sensor as trogdor, so we will follow the timings used for trogdor from CL:2695676. BUG=b:198474942 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -c max -B Change-Id: Ica6eafc47cf1b95eeb8d94c6e0a8c88519665e3f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58021 Reviewed-by: Alexandru Stan <amstan@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29mb/google/guybrush/var/nipperkin: Add ALC5682I and MAX98360 supportPatrick Huang
Add ID "10029836" for machine driver, "RTL5682" for ALC5682I and "MX98357A" for MAX98360. BUG=b:198716348 TEST=Build nipperkin, codec is functional with new machine driver. Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com> Change-Id: Iab9d11adb7cd08effa2a9b6a627832bd89cb3cb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-29mb/google/dedede/var/boten: Add fw_config probe for ALC5682-VD & VSStanley Wu
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. Define SSFC bit 9-11 in coreboot for codec within ec. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:193694180 TEST=ALC5682-VD/ALC5682I-VS audio codec can work Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Iba91b51cbbe7adc502372c9a026867de61d8035d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-29mb/google/mancomb: Delete board supportKarthikeyan Ramasubramanian
Mancomb mainboard has been cancelled. Hence delete the board support. BUG=b:190404616 TEST=None Cq-Depend: chromium:3188634 Change-Id: I3ce02efb1fa5ea488447099abe08da6051fb6fc6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-29arch/x86,cpu/x86: Disable the %gs and %fs segmentsRaul E Rangel
The %fs and %gs segment are typically used to implement thread local storage or cpu local storage. We don't currently use these in coreboot, so there is no reason to map them. By setting the segment index to 0, it disables the segment. If an instruction tries to read from one of these segments an exception will be raised. The end goal is to make cpu_info() use the %gs segment. This will remove the stack alignment requirements and fix smm_do_relocation. BUG=b:194391185, b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaa376e562acc6bd1dfffb7a23bdec82aa474c1d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-09-29soc/intel/alderlake: Add GFx Device ID 0x46c3Selma Bensaid
This CL adds support for new ADL-M graphics Device ID 0x46c3. TEST=boot to OS Change-Id: Ib55fb501f96fe9bcc328202511bbfe84a3122285 Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29mb/intel/adlrvp, mb/google/brya: Add ADLP 242 PLx configurationsTracy Wu
Add ADLP 242 sku PLx related settings, which follow the settings of ADLP 282 sku (both are 15w). BUG=b:201253904 TEST=USE='fw_debug' emerge-brya intel-adlfsp coreboot chromeos-bootimage Change-Id: If9b60893ab3e2c4a88e7d2cf45223c5fbce6f847 Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-29soc/intel/alderlake: Add ADLP 242 power configurationsTracy Wu
Add ADLP 242 sku power related settings, which follow the settings of ADLP 282 sku (both are 15w). BUG=b:201253904 TEST=Build and check fsp log to confirm the settings are set properly. Change-Id: I829dd690c22d167a507b1910106da06b275cec09 Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-29mb/google/brya: Update PCH power cycle related durationsTim Wawrzynczak
The voltage rail discharge times have been measured, so therefore the boot time on a cold boot when the CSE must go through a global reset and thus a trip to S5 can be optimized. Select the lowest applicable value for each PchPmSlp UPD that can be used with these measurements. This is programmed in the baseboard because the measured discharge times leave (what should be) plenty of margin for variants to also not violate any power sequencing guidelines from the PDG. BUG=b:184799383 TEST=verified time in S5 during a global reset is ~1s instead of 4s Change-Id: Ia373c47b3967d68ddac21707c6eb4565d9d6519e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-09-29soc/intel/alderlake: Add support for power cycle and SLP signal durationTim Wawrzynczak
The UPDs for PM power cycle duration and SLP_* signal durations are all identical to Tiger Lake, so add similar support, but use enums instead of comments to represent the durations symbolically. BUG=b:184799383 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4a531f042658894bcbc6a76eff453c06e90d66b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57891 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29mb/google/dedede: Remove drawcia_legacy board supportKarthikeyan Ramasubramanian
Support for drawcia_legacy board is cancelled. Hence remove the board support. BUG=b:192256341 TEST=None Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I76cd3e388439f5aee94a17fe35ae210f449cfbfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-09-29mb/google/dedede: Remove Boten_Legacy board supportKarthikeyan Ramasubramanian
Support for Boten_legacy board is cancelled. Hence remove the board support. BUG=b:192256341 TEST=None Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If26dc869ff95dff70c0f83a13f6f727aa5992dbd Reviewed-on: https://review.coreboot.org/c/coreboot/+/57999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-09-29mb/google/dedede: Remove wheelie variant board supportKarthikeyan Ramasubramanian
Wheelie variant board has been cancelled. Remove wheelie variant board support. BUG=b:192256341 TEST=None Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3ad5bc1c987feb55183a663937794781c7301a48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-09-29mb/google/dedede: Remove cappy variant supportKarthikeyan Ramasubramanian
Cappy variant is cancelled. Hence delete the cappy variant support. BUG=b:192256341 TEST=None Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If43188a3e6bf4f4449c7e2d08be7609efe58dca1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-09-29{sb,soc}/intel: Drop unused globalnvs.asl methodsAngel Pons
These methods are never used in the code. Drop them. Change-Id: If5568b494f821d2647ada5ae845bcd015708520e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29{sb,soc}/intel: Drop PRMx from GNVSAngel Pons
These fields are never used in the code. Drop them. Change-Id: Icd07f2d704c19126bf6df4d740c21d5a1342061b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29{sb,soc}/intel: Drop LCKF from GNVSAngel Pons
This field is never used in the code. Drop it. Change-Id: I88207ec369ab83823ef2f3fc40f68a0980ce9663 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29soc/mediatek/mt8195: initialize DFDRex-BC Chen
DFD (Design for Debug) is a debugging tool, which scans flip-flops and dumps to internal RAM on the WDT reset. After system reboots, those values could be showed for debugging. BUG=b:192429713 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ied63913db94b2e52ab394a66c70f7edfd507c99b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57980 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29vc/mediatek/mt8195: Remove unused codeRyan Chuang
Remove unused drivers and some fast calibration implementations to align with the latest MTK memory reference code. TEST=boot to kernel Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I2e6be2e16c139e48c65352fe2eabf16bf9cd550a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57978 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-28mb/purism/librem_skl: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I2c4fb1933eda2eb75bfe9181f13e189ec66cadf9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-09-28mb/google/brya/variants/taeko: add NVMe GPIOs to early_gpio_tableKevin Chang
NVMe needs extra time to run boot process, enable power and deassert reset for NVMe earlier in the boot flow that taeko can successfully boot into OS with non-serial coreboot. BUG=b:199969366 & b:200711149 TEST=Build FW and test with non-serial FW reboot 20 times pass. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I032c5b90fb2148c4075d6ead3e4161c0cc659b20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-28mb/google/dedede/var/magolor: Add custom Wifi SAR for magmaTyler Wang
Add wifi sar for magma. Due to fw-config cannot distinguish between magolor and magma. Using sku_id to decide to load magma custom wifi sar. BUG=b:192423859 TEST= emerge-dedede coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Iac15e958e61be6e3c136fb9be18b4695823ad1c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-28arch/x86: Make sure compiler knows we're stopping in hlt()Martin Roth
Currently, static analyzers don't recognize that hlt() doesn't return, so they show errors like uninitialized variables assuming that it does return. This takes care of that problem. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ia2325700b10fe1f89d749edfe5aee72b47d02f2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-28mb/google/dedede/var/galtic: Update PL1 min and max for Galith/GallopFrankChu
Update PL1 min and max values to 6 W for Galith/Gallop systems. BUG=b:201010771 BRANCH=None TEST=Build and verify on Galith/Gallop system Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I0dfda3c2c830a2ce203668431f396859e782aa3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-28vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2374_01Ronak Kanabar
The headers added are generated as per FSP v2374_01. Previous FSP version was v2347_00. Changes Include: - Offset change in FspmUpd.h and FspsUpd.h BUG=b:201239436 BRANCH=None TEST=Build and boot brya Cq-Depend: chrome-internal:4150766 Change-Id: I097e854bcb4033bdaf2498fb97b255e87d3dd70f Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57920 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-28mb/google/brya/primus: modify HID to MX98360A for next build phaseMalik_Hsu
For the next build phase, modify the HID of the speaker amp to MX98360A. BUG=b:199098681 BRANCH=none TEST=build coreboot without error Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I0c318464fca7d35bbffd7ea0f5694b83acedff0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-28soc/intel/baytrail: Always handle MRC as ELF fileAngel Pons
The current MRC binaries for Bay Trail are always ELF files. Always adjust the position in CBFS using the ELF header regardless of file names. Without adjusting the position, the system hangs right after calling into MRC. TEST: MRC position in CBFS does not change for bostentech/gbyt4. Change-Id: I74e1246a5fac3f3649be9842ff13c2fc70f72a20 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57989 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-28mb/google/dedede/var/kracko: refactor DPTF section for overridesRobert Chen
Refactor DPTF section of code under the kracko overridetree. This makes kracko override dptf section of dedede/baseboard, because the DPTF tool's CRT, PSV and TSR3 settings are different than expected. BUG=b:187482019 BRANCH=dedede TEST=Built and tested on dedede system Change-Id: Iacc543f961a7f4652ee8583920b1794f916c7ec9 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27soc/qualcomm/sc7280: Enable QUP drivers to use lz4 compressionShelley Chen
BUG=b:182963902 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -B Change-Id: I3ec557bdf2286c3f60902d5ac018b536fe99afa3 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57896 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27soc/intel/baytrail: Drop invalid `VGA_BIOS_FILE` defaultAngel Pons
This file does not exist in the coreboot tree. One should place this file in the `site-local` subdirectory and specify the paths by means of `site-local/Kconfig`. Change-Id: I86ac2a6176947f12194bec6b63bedd7db79820a0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-27ec/purism: Remove copied code from system76Arthur Heymans
This code is identical except for some renaming. Change-Id: I93795a6087ce0daca27c0d5038a1febd6ca9c775 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-09-27arch/x86,cpu/x86: Move cpu_info initialization instructions into macroRaul E Rangel
This will help reduce duplication and make it easier to add new members to the cpu_info struct. BUG=b:194391185, b:179699789 TEST=Compare assembly of romstage and ramstage before and after Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I31f264f4bb8b605fa3cb3bfff0d9bf79224072aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/57859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-27soc/amd/cezanne/early_fch: move mb_set_up_early_espi into if blockFelix Held
mb_set_up_early_espi should only be called when SOC_AMD_COMMON_BLOCK_USE_ESPI is selected. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic8ad724a2a79c1995fbe9d97f11a0f69eed9435c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-27soc/amd/cezanne: Enable CCP DMAKarthikeyan Ramasubramanian
Enable CCP DMA use in PSP verstage. This helps to reduce the boot time. BUG=b:194990811 TEST=Build and boot to OS in Guybrush. Observed a 35 - 40 ms improvement in the boot time. Before CCP DMA: 508:finished loading body 898,286 (287,576) Total Time: 2,146,182 After CCP DMA: 508:finished loading body 853,627 (240,061) Total Time: 2,110,117 Cq-Depend: chrome-internal:4116566 Change-Id: I6e4f081622a2ec78763adf56548204efc1bccf39 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27soc/amd/common/psp_verstage: Introduce boot device driverKarthikeyan Ramasubramanian
PSP verstage can access the boot device either in Programmed I/O mode or DMA mode. Introduce a boot device driver and use the appropriate mode based on the SoC support. BUG=b:194990811 TEST=Build and boot to OS in Guybrush. Change-Id: I8ca5290156199548916852e48f4e11de7cb886fb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57563 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27mb/google/brya/var/kano: Move max98373 amp ACPI info to I2C0David Wu
Move max98373 amp ACPI info to I2C0 according to kano's schematics version KANO_MLB_Proto_0811. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8f7a7938dd407666e0104ba64b22da85216a145f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27mb/google/brya: Correct SSD power sequenceEric Lai
SSD sometimes can't be detected in in warm/cold boot stress. M.2 spec describes SSD_PREST should be sequenced after power enable. BUG=b:199822704 TEST=SSD was always discovered in warm/cold boot stress. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If0a9e36cda4dc91bbccec02f39ccb9b658d24056 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27soc/amd/cezanne, vc/amd/fsp/*: Add support for CCP DMA SVC callKarthikeyan Ramasubramanian
Add support to access the boot device from PSP through Crypto Co-Processor (CCP) DMA. Implement a SVC call to use CCP DMA on SoCs where it is supported and a stub on SoCs where it is not supported. This provides an improved performance while accessing the boot device and reduces the boot time by ~45 ms. BUG=b:194990811 TEST=Build and boot to OS in guybrush. Perform cold and warm reboot cycling for 250 iterations. Change-Id: I02b94a842190ac4dcf45ff2d846b8665f06a9c75 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27mb/google/hatch/moonbuggy: Update DPTF parametersKenneth Chan
Update the DPTF parameters received from the thermal team. BUG=b:188596619 TEST=emerge-ambassador coreboot Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I081963b97ed2dae0f5d026f6443c954b52347a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57919 Reviewed-by: Joe Tessler <jrt@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27mb/system76/gaze15: Disable OC supportTim Crawford
Clevo indicated that DIMMs running at 2933 MHz are not supported on a number of processors used for this model. Change-Id: Iadf611a64de664c783696e51cfe858ca95903936 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/system76/lemp10: Use PME virtual wire for SWITim Crawford
Match the behavior of the other TGL-U boards. Change-Id: Ida962255f7a2435319d739d59eb2dc58fe342ae8 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/system76: rtd3: Remove SrcClk pin on CPU RPTim Crawford
Setting srcclk_pin only works for PCH PCIe devices. Disable them on the CPU RP and add a TODO. Change-Id: I32db116feb33a8448eb8586fe9e882b8879489d4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/intel/kblrvp: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: Ibb63f3ecd9cfbb6f564e0a9968c2776c25d84f79 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/51nb/x210: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I7255ac1ec6c43dd4b21325ae60e117458bea956d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/razor/blade_stealth_kbl: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I375ab879dd95d6a7a20644dc36312a1e62f58226 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/facebook/monolith: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Change-Id: I4e5be60d2784d003a388c52254514d0ab4d002b0 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-09-27mb/google/glados: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Change-Id: Id26d9dfc3822b9120360fc2cb2ced8d67345a659 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/intel/kunimitsu: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Change-Id: I42458f16a323d3e37d0ee1bd8335e1f8d0e1fadc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/intel/saddlebrook: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I730cd3eeffff60b3b569bfb748febbdc8ca85990 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/google/dedede/var/blipper: Generate SPD ID for supported partsZhi Li
Add the relevant memory configuration of beetley to the blipper coreboot code The memory parts being added are: 1. Micron MT53E512M32D1NP-046 WT:B 2. Samsung K4U6E3S4AB-MGCL 3. Hynix H54G46CYRBX267 BUG=b:200000608 TEST=emerge-dedede coreboot Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: I0b04f64cb007a58ae98f5ed187feb4859a43b1b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57670 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27soc/amd/common/block/include/acpimmio_map: add AOAC acronym in commentFelix Held
The Always On Always Connected block is referenced as AOAC in the code, so add that acronym in the comment and change the "Connect" to "Connected". Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6a23e0ccff62c6ceddae70e1bef5c5abf872c495 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27cpu/x86/mp_init: add expansion for SIPI acronymFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic182d7c551932ab6917a81568490ed18acdcd597 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57927 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-25soc/intel/alderlake: Use intel_microcode_find() to locate ucode.binSubrata Banik
`intel_microcode_find()` function uses cached ucode data hence it would avoid locating ucode.bin from CBFS while passing ucode.bin pointer to FSP. Change-Id: I8f92c9f20dfb055c19c6996e601c8c24767aecb7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/guybrush: Remove ALS presentationGwendal Grignou
guybrush does not have a light sensor, do not include ACPI0008 ACPI device (Light sensor that will be managed by acpi-als IIO kernel driver). BUG=b:200823325 TEST=Check on Guybrush360 the sensor is not presented. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: Id1dcb3a01ee43f780e4b118d88a0351e4c543f5a Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-09-24mb/google/brya/variants/primus: config dram speed to 3733Casper Chang
This change config the DRAM speed to 3733 for primus. BUG=b:200752480 BRANCH=none TEST=Verified that `dmidecode -t17` shows the correct configured memory speed Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I2f3a9489dddcf102b0ffc71eb9cdab6ad38d1391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/intel/adlrvp: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias for dptf_policy device. Change-Id: I02ca63ac2cc1b8ed2f5a381b3824c9beff7f33ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57870 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 10:57:20 +0000