summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
Add CHROMEOS dependencies to selects for the following Kconfig symbols: CHROMEOS_RAMOOPS_DYNAMIC CHROMEOS_RAMOOPS_NON_ACPI CHROMEOS_VBNV_CMOS CHROMEOS_VBNV_EC CHROMEOS_VBNV_FLASH EC_SOFTWARE_SYNC LID_SWITCH RETURN_FROM_VERSTAGE SEPARATE_VERSTAGE VBOOT_DISABLE_DEV_ON_RECOVERY VBOOT_EC_SLOW_UPDATE VBOOT_OPROM_MATTERS VBOOT_STARTS_IN_BOOTBLOCK WIPEOUT_SUPPORTED This gets rid of these sorts of Kconfig errors: warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS) Note: These two boards would never actually have CHROMEOS enabled: intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-21soc/intel/common: CACHE_MRC_SETTINGS doesn't depend on HAVE_MRCMartin Roth
The FSP platforms use CACHE_MRC_SETTINGS without setting HAVE_MRC, which caused a Kconfig warning. Since CACHE_MRC_SETTINGS doesn't really depend on HAVE_MRC anymore, remove the dependency in Kconfig. Fixes Kconfig warnings: warning: (CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS) selects CACHE_MRC_SETTINGS which has unmet direct dependencies (SOC_INTEL_BROADWELL && HAVE_MRC || SOC_INTEL_COMMON && HAVE_MRC) Change-Id: Id1c108f73d19cbd53b91e1671d57e7752be5d96d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11288 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-08-20mainboard: Get CHROMEOS/MAINBOARD_HAS_CHROMEOS right (again)Alexandru Gagniuc
CHROMEOS is a user-visible bool. It must not be 'select'ed in Kconfig. That's why we have MAINBOARD_HAS_CHROMEOS. This is the fifth time I find this being used wrong. Why is this confusing/so hard to get right? Change-Id: Icb4629355c63508f5a044b46842524b3d203c2da Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11290 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Skylake: update cbmem_topRizwan Qureshi
cbmem_top was using CHIPSET_RESERVED_MEM_BYTES to w/a unknown memory regions reserved by fsp for chipset use. With that being removed, the function needs to properly walk though the memory map resulted from fsp memory init to find out the usable address for cbmem root. Refer the FSP 1.3.0 Integartion guide for more details on the Memory Map. systemagent should also use the same mechanism to create the reserved RAM resource. BRANCH=None BUG=None TEST=Build and Boot kunimitsu (FAB3) CQ-DEPEND=CL:*226035,CL:*226045,CL:291573 Original-Change-Id: Id0954cf8e6388e549c7d4df67b468572b5bea539 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291611 Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Robbie Zhang <robbie.zhang@intel.com> Change-Id: I4e716170f40936081ce9d4878bf74c75f469f78d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: http://review.coreboot.org/11239 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19skylake: Update Memory and Silicon Init paramsRizwan Qureshi
Update the MemoryInit and SilicoInit params as per FSP 1.3.0 release. Note: add SvGv and Rmt to Upd. BRANCH=None BUG=None TEST=Build and Boot FAB3 (Kunimitsu) CQ-DEPEND=CL:*226035, CL:*226045 Original-Change-Id: I62000f6a485fee42ef733c3b548192f2bedfce49 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291573 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Change-Id: Iaafa658b4e710fe512526a521cf6c529efb19bf0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: http://review.coreboot.org/11238 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Fix Wifi, kepler RP mapping and enable ClkReqSupportPratik Prajapati
(1) Wifi is connected on RP1 which is 1c.0 , so enabling 1c.0 and disabling 1d.0 (2) kepler is on RP5 which is 1c.4, so enabling it (3) enabling ClkReqSupport for RP1 and RP5 so that L1 substates can get enabled. BRANCH=None BUG=chrome-os-partner:43738 TEST=Built and boot for Kunimitsu. checked all PCIe powersaving states (LTR, L1, L1S) are enabled Original-Change-Id: I525661399d1a4d939b53d5ed5f7991598b84ddcd Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/293482 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ib9a771a6ec137217668fb0385efc13b1824772b4 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: http://review.coreboot.org/11237 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19skylake: correct IO-APIC redirection entry countAaron Durbin
The skylake IO-APIC supports up to 120 redirection entries. In practice it seems FSP has already written to this write-once register. However, it doesn't hurt to actually be correct within the source. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I666b1b6034f0d37a37ea918f802317f9d5f15718 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/293251 Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I6ddbc89c98c262e2dd0f9f0b76adb092d3043602 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19glados: use macros for magic numbers in ASLAaron Durbin
The skylake SoC code now has macros for the previously hard-code numbers for IRQs and GPEs. Switch over to using those as they bring a little more clarity. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: Ic8fcc59d680cdddec9dfbc3bf679731f6d786793 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/293411 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I594907005372100a3c9d17dda9d17769844ad272 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19skylake: add gpe.h for ASL generationAaron Durbin
One thing that is brittle is lining up GPE0 bits in ASL and with a board's design proper. This results in open calculated magic numbers. To help alleviate this provide just #defines that C preprocessor can use before handing the source off to the ASL compiler. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Everything's intact. Original-Change-Id: I359616ebe4bfc83c05bafe0ca36b766efd16dcca Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/293410 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I32513c324b923fa0adbd6a0ee920c27e9b97dd1b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11233 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Enable root ports and clkreqsPravin Angolkar
This patch enables the root ports and configures the clock req numbers as per the design On kunimitsu FAB3 board with D0 MCP Root port 1 --> Wifi card --> clkreq 1 Root port 4 --> Kepler VP8/VP9--> clkreq 2 BRANCH=None BUG=chrome-os-partner:43324 CQ-DEPEND=CL:*224327, CL:*224328 TEST=Built for Kunimitsu and Boot Kunimitsu board with D0 MCP Original-Change-Id: I4e110d2d07efbfa7a306852301cd1cd89027b2ba Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/290051 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Change-Id: I6d66c78496ac3f43e07d96feefed35cf50da6aa1 Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Reviewed-on: http://review.coreboot.org/11232 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Update Mainboard ASL for Kunimitsu FAB3 with D0 MCPNaveen Krishna Chatradhi
This patch updates the mainboard.asl file to support Kunimitsu FAB3 board which is based on SKL D0 MCP. BRANCH=None BUG=chrome-os-partner:43324 CQ-DEPEND=CL:*224327, CL:*224328 TEST=Built for kunimitsu; booted on kunimitsu FAB3 with D0 MCP Original-Change-Id: I31a315740d49125591591b20c296babe49004166 Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/290050 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I81c22e407d1b3d420744eaf1d3f7ff4e8e749bcb Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/11231 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Update Gpio table for kunimitsu FAB3 variantNaveen Krishna Chatradhi
This patch updates the GPIO table to support Kunimitsu FAB3 variant, based on SKL D0 MCP. BRANCH=None BUG=chrome-os-partner:43324 CQ-DEPEND=CL:*224327, CL:*224328 TEST=Built for kunimitsu; booted on kunimitsu with D0 MCP. Original-Change-Id: I2343187a919f6d29161069135d97484191198056 Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/289939 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I47302062788a90550fd38cb113e418b21d3f756c Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/11230 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19AMD ROMSIG: Only check location if ROMSIG is usedMartin Roth
The location of the AMD ROMSIG binary was being checked and warnings were being printed even when the ROMSIG file wasn't being used. These false warnings are avoided by moving the warnings into the block where the CBFS file for the ROMSIG is generated. Change-Id: Ie44a2ad97ff3b15df6dc9b8166992de6ed837997 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11161 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-18northbridge/amd/amdfam10: Redirect legacy VGA memory access to MMIOTimothy Pearson
Commit 27baa32 (cpu/amd/model_10xxx: Do not initialize SMM memory if SMM is disabled) deactivated TSeg SMRAM, which had the side effect of routing legacy VGA memory access to DRAM. Restore the correct MMIO mapping via the MMIO configuration registers. TEST: Booted KGPE-D16 with nVidia 7300LE card and verified proper VGA functionality. Change-Id: Ie4b7c0b2d6f9a02af9a022565fe514119513190a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11240 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-17Fix Kconfig: ALWAYS_LOAD_OPROM has unmet dependency VGA_ROM_RUNMartin Roth
Broadwell and Skylake chipsets, along with a few mainboards were selecting ALWAYS_LOAD_OPROM without making sure that the dependency for that symbol was met as well. Looking at the dependencies for VGA_RUN_ROM, we see: PCI && !PAYLOAD_SEABIOS && !MAINBOARD_DO_NATIVE_VGA_INIT Since ARCH_X86 selects PCI, that's always met here. Since Broadwell and Skylake don't have native VGA init yet, that's not needed. - Make sure that VGA_RUN_ROM is selected as well. - Add dependency on !PAYLOAD_SEABIOS for both ALWAYS_LOAD_OPROM and VGA_RUN_ROM symbols where they're selected. Fixes Kconfig warning for these boards and chipsets: warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS) selects ALWAYS_LOAD_OPROM which has unmet direct dependencies (VGA_ROM_RUN) Change-Id: I787a87e9467e1fc7afe8b04864b2a89b54824b9f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-17soc/intel/skylake/Kconfig: Fix recursive Kconfig dependencyMartin Roth
Change the dependency on CONSOLE_SERIAL to select CONSOLE_SERIAL based on this question. The dependency was causing multiple warnings on every platform tested. src/console/Kconfig:21:error: recursive dependency detected! src/console/Kconfig:21: symbol CONSOLE_SERIAL depends on DRIVERS_UART_8250MEM src/drivers/uart/Kconfig:16: symbol DRIVERS_UART_8250MEM is selected by UART_DEBUG src/soc/intel/skylake/Kconfig:198: symbol UART_DEBUG depends on CONSOLE_SERIAL Change-Id: Ia0426cd150561694081b5ea7c6797d36022c1f57 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11243 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-08-17AMD Binary PI: Fix the build when the user's group has a spaceDan Christensen
When the user's primary group contains a space ls -l and awk get the wrong value for the file size. This results in padding the coreboot_psp_directory_combine_pubkey.bin file too much which ultimately means RtmPubSigned.key can not be placed at the necessary offset. Changing from ls -l to ls -ln seemed like the most minimal, POSIX-friendly way to effect this change. Change-Id: Icbeaad476753924626adb6de53dc9a30052d91a6 Signed-off-by: Dan Christensen <opello@opello.org> Reviewed-on: http://review.coreboot.org/11242 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-08-14acpi: 64bit fixesStefan Reinauer
Change-Id: I5d0c95af7d35115b5ac4141489caceef4ee1c8bb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11088 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14emulation/qemu: Serialize IQCR methodPaul Menzel
Fix the remark below for the mainboards qemu-i440x and qemu-q35. Intel ACPI Component Architecture ASL+ Optimizing Compiler version 20150717-32 Copyright (c) 2000 - 2015 Intel Corporation dsdt.aml 336: Method(IQCR, 1, NotSerialized) { Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) ASL Input: dsdt.aml - 399 lines, 16756 bytes, 245 keywords AML Output: dsdt.aml - 4000 bytes, 146 named objects, 99 executable opcodes Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 233 Optimizations Change-Id: Ibe48f872768ab8295d6fed3359d9eef04b736a05 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11162 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-14glados: make EC_SCI_L workAaron Durbin
In order for the EC_SCI_L to work the GPE0 route needs to be set along w/ the GPE event for the EC. As the GPE0 route is dynamic the EC_SCI_GPI needs to be set along with the route so everything lines up. In this case, the GPE0 route is set to the defaults such that GPP_C, GPP_D, and GPP_E are routed to GPE0 block 0, 1, and 2, respectively. This works out for glados because the EC_SCI_L is connected to GPP_E16. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. The 'acpi' interrupt in /proc/interrupts is incrementing as well as /sys/firmware/acpi/interrupts/gpe50. Original-Change-Id: I71fc4bec124f3ac87453a099412154e67aba6280 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/292011 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Idbb6d29364655537abc9ae6f012b3abb38edf138 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11210 Tested-by: build bot (Jenkins)
2015-08-14glados: make EC_SMI_L functionalAaron Durbin
Set the EC_SMI_GPI define to be GPP_E15 and route that GPIO for SMI generation. Also, the mainboard_smi_gpi_handler() was introduced on skylake in order to process any GPI that could generate an SMI. Switch to this handler so one can process the appropriate events. BUG=chrome-os-partner:43778 BRANCH=None TEST=Used 'lidclose' on EC command line during depthcharge to confirm EC_SMI_L generates SMI and shutdown happens. Original-Change-Id: Ia365b86161670a809e3fa99dde38fccc612d5e77 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291934 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ic16ea8e8d6ff564977ed2081d2353c82af71adea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11209 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: fix SMI GPI status handlingAaron Durbin
The current construction for processing SMI GPI events didn't allow for the mainboard to query the state of a particular GPI for the snapshotted SMI event. The skylake part can route GPIs from any (there are design limitations) GPIO group. Those status and enable registers are within the GPIO community so one needs to gather all the possibilities in order to query the state. The call chain did this: southbridge_smi_gpi( clear_alt_smi_status() -> reset_alt_smi_status() -> print_all_smi_status() -> return 0) As a replacement the following functions and types are introduced: struct gpi_status - represent gpi status. gpi_status_get() - per gpi query on struct gpi_status gpi_clear_get_smi_status() - clear and retrieve SMI GPI status mainboard_smi_gpi_handler() - mainboard handler using gpi_status Also remove gpio_enable_all_smi() as that construct was never used, but it also is quite heavy handed in that it would enable SMI generation for all GPIs. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built. Original-Change-Id: Ief977e60de65d9964b8ee58f2433cae5c93872ca Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291933 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ida009393c6af88ffe910195dc79a4c0d2a4c029e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11208 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: enable SMI routed GPIsAaron Durbin
The first pass of the GPIO configuration patch didn't enable the SMI# generation for GPIs marked as SMI routed. Now when a pad is configured as SMI routed the bit for the SMI enablement is set accordingly. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. Confirmed SMI_EN being set for SMI routed GPIOs. Original-Change-Id: I796b68accb7a49b03ef18539861e72fa9d169c26 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/292010 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I3be770234d3f605ae630ecd5cd4cfe4867243999 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11207 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: clarify and fix gpio macrosAaron Durbin
The gpio pad configuration currently defaults to ACPI owned GPIs. A '0' was used which wasn't so clear. Add a comment and explicitly set it to ACPI. Also, PAD_CFG_GPI_ACPI_SMI wasn't using the _PAD_CFG_ATTRS macro which causes compliation errors if attempted to be instantiated. No piece of code tried to use it so the error was overlooked. Lastly, allow for soc/gpio.h to be included during ASL compilation. That allows for gpio_defs.h to be included and those macros utilized without needing to know the file name and where it lives; just use the generic gpio.h. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I9dbadb0b494683ab38babfc1ac5e13093ee37730 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291935 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id4fa8b65ec1e1537dbf09824c2155119a768807e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11206 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: provide clarification for FADT gpe0_blk_lenAaron Durbin
Instead of using a hard-coded value leverage the existing definitions to perform GPE0 block length calculations. There are 4 pairs of 32-bit status/enable registers. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I14d08298b5750c91ce0ac3fa33569813396f7089 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291932 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I127f026f15180fa79625d4cad96d5e35f85e5090 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11205 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: remove ec_smi_gpio and alt_gp_smi_enAaron Durbin
The ec_smi_gpio and alt_gp_smi_en devicetree options are goign to be removed. The plan for skylake is to set the settings by the mainboard through either gpio pad configuration or through helper functions. Moreover, these values only allow *1* SMI GPIO configuration in that the following has to be true: alt_gp_smi_en = 1 << (ec_smi_gpio % 24) If not, then another gpio(s) from the same group has the SMI_EN bit set for it. Lastly, remove all the subsequent dependencies as they are no longer used: enable_alt_smi() and gpio_enable_group(). BUG=chrome-os-partner:43778 BRANCH=None TEST=None Original-Change-Id: I749a499c810d83de522a2ccce1dd9efb0ad2e20a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291931 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2e1cd6879b76923157268a1449c617ef2aada9c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: provide GPE0 routing devicetree configurationAaron Durbin
On skylake the GPE0 routing can be dynamically changed to a particular GPIO group. Provide the ability for the mainboard to set the route accordingly. If any of the values in the devicetree are the same the current setting in the PMC register is used. The GPIO communities need to have matching configuration for the plumbing to work properly. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados w/ and w/o devicetree changes. Fields are set accordingly. Original-Change-Id: I263d648c8ea8a70b21570f01b333d05a5fa2a4e3 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291930 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I966d38bc197dbb52a2ba50927c06e243e169afbe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11203 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: remove IedSize from chip.hAaron Durbin
IedSize is not used in replace of IED_REGION_SIZE. Drop it from chip.h. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: I38f6518701306c0ffc6d2b2e3fe01624a5eadf54 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290933 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: I9dd9e689d4d4f7b4770369dcd042d3325990ae32 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11201 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14kunimitsu sklrvp: remove unused IedSizeAaron Durbin
The skylake code is using IED_REGION_SIZE instead of devicetree.cb. Drop the the option from the device trees. BUG=chrome-os-partner:43636 BRANCH=None TEST=None Original-Change-Id: Ib252266060fbc6ed0eeaac19a6b79c173c6c9a13 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290932 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: Ib08628e163ac27d4c49eddcbec6cab3252abd4aa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11200 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: pass IED_REGION_SIZE Kconfig to FSPAaron Durbin
Ignore the devicetree.cb setting and use the already existing IED_REGION_SIZE Kconfig option. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: Ic1e760493635218faddeee4003303949305bc529 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290931 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: I416d4eb186a42d3258682e02a0a2e1db5bb668ac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11199 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14intel/common: fix stage_cache_external_region()Aaron Durbin
The stage_cache_external_region() calculation is actually dependennt on the properties of the chipset. The reason is that certain regions within the SMRAM are used for chipset-specific features. Therefore, provide an API for abstracting the querying of subregions within the SMRAM. The 3 subregions introduced are: SMM_SUBREGION_HANDLER - SMM handler area SMM_SUBREGION_CACHE - SMM cache region SMM_SUBREGION_CHIPSET - Chipset specific area. The subregions can be queried using the newly added smm_subregion() function. Now stage_cache_external_region() uses smm_subregion() to query the external stage cache in SMRAM, and this patch also eliminates 2 separate implementations of stage_cache_external_region() between romstage and ramstage. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: Id669326ba9647117193aa604038b38b364ff0f82 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290833 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Idb1a75d93c9b87053a7dedb82e85afc7df6334e0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11197 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: use smm_subregion() during SMM relocationAaron Durbin
The smm_subregion() support allows the SMM relocation to not use duplicated math by calling out the specific regions it wants. IED base is now correct and not pointing outside from SMRAM. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: Ief8940c2ab6320449500ced2121d0cd7ed73af4b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290930 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: I00c3284cfacb2a73942640ccfa7912b7d65efb9d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11198 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14intel/common: use external stage cache for fsp_ramstageAaron Durbin
The fsp_ramstage.c code was not taking advantage of the stage cache which does all the accounting and calculation work for the caller. Remove the open coded logic and use the provided infrastructure. Using said infrastructure means there's no need for the FSP_CACHE_SIZE Kconfig variable. Therefore, remove it. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, and resumed on glados. Original-Change-Id: I4363823c825b4a700205769f109ff9cf0d78b897 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290831 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ifd3cc4a538daac687949c5f4cab2c687368d6787 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11196 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: clean up SMM region calculationsAaron Durbin
The TSEG is defined to be from TSEG->BGSM in the host bridge registers. Use those registers at runtime to calculate the correct TSEG size. Lastly, use a few helper macros to make constants more readable. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: I6db424a0057ecfc040a3cd5d99476c2fb8f5d29b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290832 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I6890fa450ce8dc10080321aa1a7580e0adc48ad5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11195 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14fsp1_1: fsp_relocate: use struct region_device and struct progAaron Durbin
Using struct prog and struct region_device allows for the caller to be none-the-wiser about where FSP gets placed. It also allows for the source location to be abstracted away such that it doesn't require a large mapping up front to do the relocation. Lastly, it allows for simplifying the intel/commmon FSP support in that it can pass around a struct prog. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, and resumed on glados. Original-Change-Id: I034b04ab2b7e9e01f5ee14fcc190f04b90517d30 Original-Signed-off-by: Aaron Durbin <adurbin@chroumium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290830 Original-Tested-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Change-Id: Ibe1f206a9541902103551afaf212418fcc90e73c Signed-off-by: Aaron Durbin <adurbin@chroumium.org> Reviewed-on: http://review.coreboot.org/11193 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14stage_cache: make prog const in stage_cache_add()Aaron Durbin
The stage_cache_add() function should not be manipulating the struct prog argument in anyway. Therefore, mark it as const. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, and resumed on glados. Original-Change-Id: I4509e478d3c98247b9d776f6534b949d9ba6282c Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290721 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ibadc00a9e1cbbf12119def92d77a79077625fb85 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11192 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14Skylake: Add ASL code to enable GPIO controllerArchana Patni
This patch enables GPIO controller for skylake. It adds community base addresses and offset for Community0, Community1, and Community3. Community2 is not exposed in BIOS or enabled in the kernel driver. Also, clean up the carry over GWAK implementation from BDW. BRANCH=None BUG=chrome-os-partner:42393 TEST=cat /sys/kernel/debug/gpio should list of GPIOs TEST=export a GPIO pin using /sys/class/gpio/export Original-Change-Id: I891c40589d3dbd796cf593626472c7b5674a1ae0 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291230 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Change-Id: I7481ce682ccae872fddf81b3188c3415d5d3f7d9 Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Reviewed-on: http://review.coreboot.org/11191 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14intel/common: use acpi_is_wakeup_s3() in fsp_ramstage.cAaron Durbin
acpi_is_wakeup_s3() was introduced in upstream coreboot while the FSP support code was written. Move to using that instead of using the romstage_handoff structure directly. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, and resumed on glados. Original-Change-Id: I71601a4be3c981672e25e189c98abb6a676462bf Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290720 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2ae4d9906e0891080481fb58b941921922a989d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11190 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: clear write-1-to-clear fields in power regsAaron Durbin
Explicitly clear all write-1-to-clear fields in the appropriate power state registers. That way stale state isn't left around from boot to boot. The MMIO PMC registers are always added such that the resource can be accessed from reg_script. It doesn't hurt to add the resource, and it's actually more informative by attaching the actual resources owned by the device. BUG=chrome-os-partner:43625 BRANCH=None TEST=Built and boot glados. Did global reset. Noticed bits set. Did normal reset and saw those same bits no longer set. Original-Change-Id: Idd412bd6bf2c6c57b46c74f9411bdf8413ddd83e Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290339 Change-Id: Ibef1aefedf6ba006f17f9f94998a10b39cc6bfec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11186 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: fix invalid GNVS base addressAaron Durbin
Leaving a sentinel 0xC0DEBABE and fixing it up is is the old way of setting the correct base address for GNVS. One just needs to reference NVSA which is already filled in by the skylake ACPI code. BUG=chrome-os-partner:43611 BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. /sys/firmware/log shows up as well as ramoops using the correct address. Original-Change-Id: I1d4979b1bb65faa76316a4ec4c551a7b9b9eed32 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290338 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I25efea73a383215f9365ce91230f79516b0201a6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11185 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: enumerate the SMI status fieldsAaron Durbin
Provide #defines for the bit fields in the SMI status register. This allows for one to set the callback accordingly without hard coding the index. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I3e61d431717c725748409ef5b543ad2eb82955c4 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289802 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I1a91f2c8b903de4297aaa66f5c6ff15f1b9c54f6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11184 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: set DISB in GEN_PMCON_A register properlyAaron Durbin
DISB (bit 23) in GEN_PMCON_A represents to MRC that DRAM training is complete. However, as a 8-bit write was being performed the bit was never being set. BUG=chrome-os-partner:43516 BRANCH=None TEST=Built and booted to kernel. Rebooted. Noted full memory training was not being peformed. Original-Change-Id: If2a9cc2f80bc38ea86fb0d7ff855ef95540b561b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290337 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ic7973e0ec279304797e0b3d83d7378f620f2b548 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11183 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: fill out gen_pmcon_* bitfieldsAaron Durbin
Open coding bitfields is really annoying as no one knows what they are unless you have a doc in front of you. Fill in the bitfields for the GEN_PMCON_A and GEN_PMCON_B registers. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: Id48de68eaa3896c17d5da2ffb0bcf17062f73e5e Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290336 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I968be9736419e26a771e0a0c3c964d540fbb1efe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11182 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14glados: enable SMBus deviceAaron Durbin
In order to run with the debug FSP the SMBus device needs to be enabled. Additionally, the TCO block lives within the SMBus device so if TCO is to be employed then the SMBus device needs to be enabled as a prerequisite. BUG=chrome-os-partner:42407 BRANCH=None TEST=Buit and booted into kernel. Original-Change-Id: I269650fa5222b4741ef495188dff1f4b8176fe89 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290364 Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Change-Id: Ia1f72ea7bd70728de83cdff07df9810a326266c2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11181 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: do not overlap resourcesAaron Durbin
FSP was setting up the TCO registers to be mapped at 0x400. However, the SMBus initialization in romstage was mapping its I/O BAR to 0x400 as well. The result seemed to cause the TCO register to be hidden. However, the board was rebooting in depthcharge when the SMBus device was enabled from a TCO timeout. As the TCO timer was halted before the double resource assignment it's not clear how the TCO was getting re-enabled. In either case, the current behavior is wrong. BUG=chrome-os-partner:42407 BRANCH=None TEST=Built and booted glados w/ SMBus enabled. Original-Change-Id: I43c0d67a76abac51ccfd5105245792981fbcd04c Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290363 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I3839290768c27626c3fd2d67d5de94c291c1386e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11180 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: use native gpio configuration for uartAaron Durbin
Instead of open coding the UART2 gpio configuration use the support library. BUG=chrome-os-partner:42982 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I9637cb995d51b67eb320650d92f8518de0280dca Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289801 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I7f0e6599df983323f773f1ec6600537c20c15b11 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11176 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14glados: move to native gpio configurationAaron Durbin
Instead of relying on FSP to do gpio configuration in one place use the native support in coreboot. This also removes the open coded configuration of the memory configuration ids. BUG=chrome-os-partner:42982 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I4655221d821d91a2270d774305a02d6bd5c3959c Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289800 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2e66242d050c3825f6bc65d3d2c7f51d2cdfbd73 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11175 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: provide native gpio functionalityAaron Durbin
It's important to be able to configure the gpio pads at various stages instead of a single place using FSP. Without this support there is a lot of duplicated open-coded pad configuration taking place both within the SoC code and mainboards. Current limitation is that all GPIOs are in ACPI mode. i.e. The HostSW ownership register sets the pad configuration to only update GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS. The GPI_STS update is masked within the GPIO community registers. BUG=chrome-os-partner:42982 BRANCH=None TEST=Built and booted glados. Original-Change-Id: Id8a00e99c7a4c3912de2feaff9cea12b402f2c68 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289789 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I4c86b47ac5ab004f2bfd7cb07dd23c458f7dbb7c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11174 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14cpu/amd/model_10xxx: Do not initialize SMM memory if SMM is disabledTimothy Pearson
In the wake of the recent Intel "Memoy Sinkhole" exploit a code review of the AMD SMM code was undertaken. While native Family 10h support does not appear to be affected by the same SMM flaw, it also does not require SMM to function. Therefore, the SMM memory range initialization should only be executed if SMM will be used on the target platform. Change-Id: I6531908a7724933e4ba5a2bbefeb89356197e8fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11211 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-08-13skylake: fix serial port with new code baseAaron Durbin
Many Kconfig options changed in coreboot.org since skylake was first started. Fix Kconfig option name changes, and also provide a common option, UART_DEBUG that can be selected to select all the necessary options. Note: It's still a requirement to manually unset the 8250IO option because that's unconditionally set. BUG=chrome-os-partner:43419 BUG=chrome-os-partner:43463 BRANCH=None TEST=Built glados. Booted into kernel. Kernel reboots somewhere. Original-Change-Id: I9e6549ea0f1d6b9ffe64a73856ec87b5bc7b7091 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289951 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I0e6b492d7279cc35d4fb3ac17fd727177adce39d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11172 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13glados: Enable wake from EC via LAN_WAKE#Duncan Laurie
Enable the Deep Sx pins to allow wake from the EC via LAN_WAKE#. Report the EC wake pin LAN_WAKE as GPE[112]. BUG=chrome-os-partner:43079 BRANCH=none TEST=suspend/resume on glados with wake from keyboard Original-Change-Id: I99664e1e406d15e7460046a6168cbd3a377aaca4 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288921 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I19db144ed5db183f47af03340886a5e770af8bc8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11171 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13skylake: Add Deep Sx configuration for wake pinsDuncan Laurie
Add support for enabling various pins in Deep Sx by setting a register in the mainboard devicetree. BUG=chrome-os-partner:43079 BRANCH=none TEST=build and boot on glados Original-Change-Id: I1b4fb51f72b88bdc49096268bdd781750dcd089d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288920 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7555a92fecc6e78b579ec0bc18da202cb0c824e2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11170 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13uart8250mem: provide uart_fill_lb()Aaron Durbin
There was no implementation for uart_fill_lb() in the 8250mem driver. Rectify this so when 8250MEM and CONSOLE_SERIAL are employed then the build doesn't fail. BUG=chrome-os-partner:43419 BRANCH=None TEST=Built with glados using 8250MEM Original-Change-Id: I35d6b15e47989c1854ddcee9c6d46711edffaf3e Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289899 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Change-Id: I972b069a4def666f509268816de91ed6c0f655d9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11169 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13skylake: remove CBFS_SIZE option in SoC directoryAaron Durbin
CBFS_SIZE is living as a mainboard attribute. Because of the Kconfig include ordering the SoC *cannot* set the default. Remove from the soc Kconfig and add a default Kconfig for SOC_INTEL_SKYLAKE. BUG=chrome-os-partner:43419 BRANCH=None TEST=built glados Original-Change-Id: I8808177b573ce8e2158c9e598dbfea9ff84b97c7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289833 Original-Reviewed-by: Martin Roth <martinroth@google.com> Change-Id: Icf52d7861eee016a35be899e5486deb0924a0f3c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11168 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13skylake: fix garbled patch from upstreamAaron Durbin
In the review process for http://review.coreboot.org/#/c/11052/ the code was mangled and the result was unbuildable code. Fix this. BUG=chrome-os-partner:43419 BRANCH=None TEST=Can actually build bootblock. Original-Change-Id: I5bc63b8c435dbf025f1c334e9a1bc4a9da2b4902 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289788 Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Change-Id: Id0f67d8b74fa9146bf01990f599d538222f7e0e2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11167 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13x86: parameterize asl_template for CBFS inclusionAaron Durbin
The asl_template previously unconditionally included dsdt.aml. However, COMPILE_IN_DSDT=y results in the dsdt.aml being linked directly into ramstage. Thus the information is duplicated. The inclusion of this file unconditionally throws some errors as certain assets need to be included in CBFS. However, as there isn't fine-grained ordering control in how files are added fixed resource requirements for other assets collide result in failure to build. To remedy both things, provide a 2nd argument to asl_template which defaults to 'y' for CBFS addition. In the COMPILE_IN_DSDT=y case pass 'n' so that dsdt.aml is no longer added. BUG=chrome-os-partner:43419 BRANCH=None TEST=For glados: Built with COMPILE_IN_DSDT=y. dsdt.aml not included. Built with COMPILE_IN_DSDT=n. dsdt.aml was included. Original-Change-Id: I4767e5be2915c1732251fe415017f30314c5efc9 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289840 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id1828627ba0a034eb05b2fe23be76e19f3040444 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11166 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-08-13soc/common/intel: Reset is not dependend upon FSPLee Leahy
Remove dependency of common reset code on FSP BRANCH=none BUG=None TEST=Build and run on Braswell and Skylake Original-Change-Id: I00052f29326f691b6d56d2349f99815cafff5848 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286932 Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7f59f0aad7dfae92df28cf20fff2d5a684795d22 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: http://review.coreboot.org/11165 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2015-08-13amd: raminit sysinfo offset fixAaron Durbin
The sysinfo object within the k8 ram init is used to communicate progess/status from all the nodes in the system. However, the code was assuming where the sysinfo object lived in cache-as-ram. The layout of cache-as-ram is dynamic so one needs to do the lookup of the correct address at runtime. The way the amd code is compiled by #include'ing .c files makes the solution a little more complex in that some cache-as-ram support code needed to be refactored. Change-Id: I6500fa7b005dc082c4c0b3382ee2c3a138d9ac31 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10961 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13getac/p470: enable early cbmem initPatrick Georgi
Change-Id: I4afec92c57c6af4c99858afae53fa7746f47bc7a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11159 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-13getac/p470: Enable native VGA initPatrick Georgi
Change-Id: I6c5a2324d1a9e21f4e052678be8f0e0dbfed6494 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11136 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-13getac/p470: Add C-State valuesPatrick Georgi
Derived from what the vendor BIOS is doing. Change-Id: Ie2cba7b86b6bb3f1dcc4a5e1c189aa45d0aab109 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: fwts 15.08 Reviewed-on: http://review.coreboot.org/11142 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-11getac/p470: Clean up SIO access in ACPIPatrick Georgi
This adapts Ia5101d5a1 for the p470. Change-Id: Ib09a0bc58fddd6240834cc890f00df91a74f4161 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11160 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-08-11chromeos: Allow for VB_SOURCE overridePaul Kocialkowski
One may prefer to include vboot from another directory than 3rdparty for convenience. This is especially the case in Libreboot, where 3rdparty is not checked out at all. Change-Id: I13167eb604a777a2ba87c3567f134ef3ff9610e4 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11116 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-10chromeos: vboot: Adaptations for using a separate object out directoryPaul Kocialkowski
$(obj) might be defined either as a relative or an absolute path. Thus, it has to be filtered out before adding $(top) to it (in case of an absolute path) when building vboot. It is then provided separately in CFLAGS (as an absolute path). In addition, VB2_LIB inherits $(obj), so it might also already be an absolute path, and prefixing $(top) to it doesn't apply. Thus, the absolute path to it should be passed to the vboot make command. Change-Id: I13e893ebdf22c4513ee40d9331a30ac7de8f9788 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: http://review.coreboot.org/11120 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-10google/stout: Fix ELOG related ifdefsPatrick Georgi
The used functions require the ELOG_GSMI feature, not just ELOG. Change-Id: If38cf0b710d9236012bfb1f0b119c10f9e533a25 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11098 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-10getac/p470: enable GPU devices in devicetreePatrick Georgi
This enables adding the GPU specific entries to the SSDT. Change-Id: I04d0eb7bf6f3e28d89c9318b777875e8a78b1ab5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11140 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-10intel/i945: don't read structs out of uninitialized pointersPatrick Georgi
Change-Id: I7f17cd1418f05ff3e8cd559eca6ec3ce7f9bfb79 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11139 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-10getac/p470: Make suspend-to-ram workPatrick Georgi
Change-Id: I37c5d8dd9353d4181046186688f20a3b85973562 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11153 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-09samsung/exynos5250: Add vboot2 memory regionPatrick Georgi
Change-Id: Ia7d2cafc958859be782f63c956dbd632e28bcf11 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11101 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-09imgtech/pistacho: Add vboot2 memory regionPatrick Georgi
Change-Id: I375397d4a1db6fef6b40421590f315c0f7eb0948 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11100 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-09amd8111, ck804, mcp55: use CONFIG_HPET_ADDRESSJonathan A. Kollasch
As acpi_write_hpet() uses CONFIG_HPET_ADDRESS in the HPET table we need to use CONFIG_HPET_ADDRESS when assigning it to the device. Change-Id: I656f917658f1c1717bb3653fa048a6d36fca2454 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10925 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09AMD K8: Avoid duplicate variables in SSDT on multisocket systemsJonathan A. Kollasch
Related-to: I3175c8b29e94a27a2db6b11f8fc9e1d91bde11f9 (ACPI: Fix corrupt SSDT table on multiprocessor AMD Family 10h systems) Change-Id: I0b5f265278d90cbaeddc6fc4432933856050f784 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10912 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09Only apply libgcc workaround on x86-32Stefan Reinauer
This should probably be moved out of lib and to arch/x86, since it does not even apply on x86-64, and ARM has its own copy of libgcc. Change-Id: I4fca1323927f8d37128472ed60d059f7a459fc71 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11110 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09drivers/pc80/i8254.c: Indent with GNU indent 2.2.11Paul Menzel
Run `indent -linux src/drivers/pc80/i8254.c` and manually put the `;` in the while loop back on a separate line. Change-Id: I58c4c5df3846a91ef92aafb608962dc26a21f811 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09riscv-spike: support for Spike emulation of riscvThaminda Edirisooriya
Spike support: QEMU RISCV is broken, and the maintainers at Berkeley are working on it, but at the moment spike is the only way to test on riscv. Add support for spike console output for debugging. Privileged ISA: Update to privileged ISA in RISCV (machine, supervisor, hypervisor, user modes) broke exisitng RISCV asm, and bootblock.S was updated to match the new spec. Clean old assembly [pg: things build with gcc 4.9 now, but don't expect them to work. Hardcoding register names into the assembler language may not be the smartest idea of the RISCV folks.] Change-Id: Ie2c109d3c26712c207512f74f28ce1a925e6e181 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-09license headers: Drop FSF addresses againPatrick Georgi
Some FSF addresses found their way back into our tree. Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11145 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-09f10/f12: Remove whitespace from gcccar.incStefan Reinauer
:'<,'>s,\ *$,, Change-Id: I9fca0e12f02d6fff4644abacecd4a31cea64bbc1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11024 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09acpi: Align FACS to 64 bytesPatrick Georgi
The spec states (5.2.10): "The BIOS aligns the FACS on a 64-byte boundary anywhere within the system's memory address space." Change-Id: Ie9415e505525dbdd418028d4954018c829921a18 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: fwts 15.08 Reviewed-on: http://review.coreboot.org/11141 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-08samsung/exynos5250: Enable bootblock consolePatrick Georgi
Change-Id: I7b177b4c57f8e304167610205196ecfe4beb4fea Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11102 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-08google/urara: Stub out get_write_protect_state()Patrick Georgi
vboot2 requires it Change-Id: I63bc3f176af72da8ea172a09aa536a10f1184b14 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11099 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-08broadcom/cygnus: returning from verstage without having one is uselessPatrick Georgi
Change-Id: I488b74b73a7654e97958a80fa7c83258fea3e959 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11103 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-07via/nano: Move CPU microcode to 3rdparty/blobsStefan Reinauer
Change-Id: I5da2a9fc34d2108caa2f21c0883d209b03a6b872 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11132 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-07vendorcode: Move AMD sources from blobs to vendorcodeMarc Jones
The AMD AGESA binaryPI sources were incorrectly committed to 3rdparty/blobs. Move them from blobs to vendorcode and fix Kconfig and Makefile.inc to match. Change-Id: I55a777553c1203464d7f7f4293b361fedcfa3283 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10982 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-07amd/model_fxx: Move CPU microcode to 3rdparty/blobsStefan Reinauer
Change-Id: I1a772be9d72aa6d6552f5ba21c20b28e400677e9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11131 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-07amd/model_10xxx: Move CPU microcode to 3rdparty/blobsStefan Reinauer
Change-Id: Ib053bdec185eca2b45c95bec713cf0fb6d16c0bc Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11130 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-05vendorcode: Fixup AGESA PI Kconfig variablesMarc Jones
The *_SELECTED Kconfig variables are not needed with the options contained within "if CPU_AMD_AGESA_BINARY_PI" introduced in e4c17ce8. It also removes the need to source and select the default prior to selecting the AGESA source or AGESA PI option. Change-Id: Iffa366f575f7f155bd6c7e7ece2a985f747c83be Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-04x86: Make sure boot device is mapped below 4GStefan Reinauer
On x86-64 the current way of calculating the base address of the boot device (SPI flash) gets an unwanted sign extension, making it live somewhere at the end of 64bit address space. Enforce rom_base to be at the upper end of the 4G address space. Change-Id: Ia81e82094d3c51f6c10e02b4b0df2f3e1519d39e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11121 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-30gigabyte/ga-b75m-d3h: Update device treeDamien Zammit
This patch resolves the outstanding issues with PCI device enumeration and getting the board to boot into GNU/Linux with VGA rom. Previously the board would not boot to GNU/Linux with video, even if VGA rom was used. Bugs in the devicetree were fixed according to superiotool output. Tested on GA-B75M-D3H with VGA rom. Booted to GNU/Linux (Fedora 22 4.0.4-301.fc22.x86_64) Change-Id: Ide1f406652659e6f99ee5d993719c187650fffe4 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/10895 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-07-30vendorcode: 64bit fixes for AMD CIMX SB800Stefan Reinauer
Make SB800 code compile with x64 compiler These fixes probably apply 1:1 to the other SB components in that directory. Change-Id: I9ff9f27dff5074d2faf41ebc14bfe50871d9c7f7 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10573 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-07-30vendorcode: Port AMD Agesa for Fam14 to 64bitStefan Reinauer
Change-Id: Ic6b3c3382a6d3fdc6d716ea899db598910b4fe3e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10581 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-07-30SB800: Port to 64bitStefan Reinauer
Change-Id: I944fb254e9470c80b13c9eef9d6b1177a56e615f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Scott Duplichan <scott@notabs.org> Reviewed-on: http://review.coreboot.org/10582 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-07-30amd/bettong: Enable fan controlWANG Siyuan
1. Use enable_imc_thermal_zone to enable fan control. 2. The ACPI method ITZE works on Ubuntu 14.04 and Windows 7 but does not work on Windows 8, so I didn't use it. After this issue is fixed, I'll add ACPI_ENABLE_THERMAL_ZONE in bettong/Kconfig. 3. Fan control works on Bettong. I used "APU Validation Toolkit" to test on Windows 8. This tool can put load to APU. The fan's behaviour is just like bettong/fchec.c defined. When the temperature is 40 Celsius, the fan start to run. Change-Id: I0fc22974a7a7cf3f6bdf5f1c66be95219a177e12 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10721 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-30AMD binary PI: add southbridge support for fan controlWANG Siyuan
1. Add functions to support fan control. 2. When IMC firmware is added, the current firmwares' layout cause build error. There is not enough space to add some firmwares, so HUDSON_PSP_OFFSET is added to fix this problem. Change-Id: Ie470a88cb9da256d9f72ea56bf268c15df195784 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10720 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-30AMD binary PI: add vendorcode support for fan controlWANG Siyuan
Binary PI doesn't provide fan control lib. HwmLateService.c and ImcLib.c are ported from Kabini PI. I have tested on AMD Bettong. The two files work. Change-Id: Ia4d24650d2a5544674e9d44c502e8fd9da0b55d3 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10719 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-29skylake: Update microcode reload in ramstage.Rizwan Qureshi
For Skylake, Microcode is being loaded from FIT, Skylake supports the PRMRR/SGX feature. If This is supported the FIT microcode load will set the msr (0x08b) with the Patch id one less than the id in the microcode binary. This results in Microcode getting reloaded again in bootclock and ramstage (MP init). Avoid the microcode reload by checking for PRMRR support. BUG=chrome-os-partner:42046 BRANCH=None TEST=Built for glados and tested on RVP3 CQ-DEPEND=CL:287513 Change-Id: Ic5dbf4d14dc1441e5b5acead589a418687df7dca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c599714b2aef476297eeaad5da8975731b12785a Original-Change-Id: Id3a387aa2d8fd2fd69052bfc7b4e88a7ec277a72 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/287674 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11056 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-07-29Add SoC specific microcode update check in ramstageRizwan Qureshi
Some Intel SoCs which support SGX feature, report the microcode patch revision one less than the actual revision. This results in the same microcode patch getting loaded again. Add a SoC specific check to avoid reloading the same patch. BUG=chrome-os-partner:42046 BRANCH=None TEST=Built for glados and tested on RVP3 CQ-DEPEND=CL:286054 Change-Id: Iab4c34c6c55119045947f598e89352867c67dcb8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ab2ed73db3581cd432f9bc84acca47f5e53a0e9b Original-Change-Id: I4f7bf9c841e5800668208c11b0afcf8dba48a775 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/287513 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11055 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-07-29Skylake: Fix microcode reload in bootblock cpu initRizwan Qureshi
If Skylake microcode is being loaded from FIT, Skylake supports the PRMRR/SGX feature. If this is supported the FIT microcode load will set the msr (0x08b) with the patch ID one less than the ID in the microcode binary. This results in microcode getting reloaded again in the bootblock cpu init. Avoid the microcode reload by checking for PRMRR support. BUG=chrome-os-partner:42046 BRANCH=None TEST=Built for glados and tested on RVP3 Change-Id: I06e59f5cad549098c7ba2dfa608cd94a0b3f0ae1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6242b9dea283149bd0c968af1ba186647d37162d Original-Change-Id: Iea5a223aa625be3fc451e8ee5d3510f548b07f8b Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286054 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11052 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-07-29arm, arm64, mips: Add rough static stack size checks with -Wstack-usageJulius Werner
We've seen an increasing need to reduce stack sizes more and more for space reasons, and it's always guesswork because no one has a good idea how little is too litte. We now have boards with 3K and 2K stacks, and old pieces of common code often allocate large temporary buffers that would lead to very dangerous and hard to detect bugs when someone eventually tries to use them on one of those. This patch tries improve this situation at least a bit by declaring 2K as the minimum stack size all of coreboot code should work with. It checks all function frames with -Wstack-usage=1536 to make sure we don't allocate more than 1.5K in a single buffer. This is of course not a perfect test, but it should catch the most common situation of declaring a single, large buffer in some close-to-leaf function (with the assumption that 0.5K is hopefully enough for all the "normal" functions above that). Change one example where we were a bit overzealous and put a 1K buffer into BSS back to stack allocation, since it actually conforms to this new assumption and frees up another kilobyte of that highly sought-after verstage space. Not touching x86 with any of this since it's lack of __PRE_RAM__ BSS often requires it to allocate way more on the stack than would usually be considered sane. BRANCH=veyron BUG=None TEST=Compiled Cosmos, Daisy, Falco, Blaze, Pit, Storm, Urara and Pinky, made sure they still build as well as before and don't show any stack usage warnings. Change-Id: Idc53d33bd8487bbef49d3ecd751914b0308006ec Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8e5931066575e256dfc2295c3dab7f0e1b65417f Original-Change-Id: I30bd9c2c77e0e0623df89b9e5bb43ed29506be98 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236978 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29skylake: clean-up pei_datarobbie zhang
Remove the items that are obviously broadwell left or become no-need with fsp. BUG=chrome-os-partner:43186 BRANCH=None TEST=build and boot on sklrvp3. Signed-off-by: robbie zhang <robbie.zhang@intel.com> Change-Id: I5dfd62363eecc514e45a7b7ba0961ec7fe0499ee Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 570920cdc9e9c08ee85dcb08998069f1cae2d3cd Original-Change-Id: I63176584042516c4d28f1bb6403e7bbe5de61010 Original-Reviewed-on: https://chromium-review.googlesource.com/288833 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Robbie Zhang <robbie.zhang@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: http://review.coreboot.org/11072 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29skylake: align power management names with hardwareAaron Durbin
Some of the field and register names in the power management code were not reflecting current chipset documentation. While in there fix 0-sized array in the power_state structure. Lastly, log the entire STD GPE register for visibility in elog. It reports as an extension of other GPIO wake events. BUG=None BRANCH=None TEST=Built and booted. Change-Id: I57a621a418f90103ff92ddbf747e71a11d517c9a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: ed15cc7d0aeee8070e134ed03e28fced9361c00e Original-Change-Id: I19f9463c87e9472608e69d143932e66ea2b3c3e1 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288296 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11070 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 09:20:16 +0000