summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-01-13mainboard/google/kahlee: Finish GPIO90 setup for GruntMartin Roth
GPIO 90 is being used as a GPIO. The IOMUX register is set correctly, but these additional registers need to be set to use it as a GPIO. - Split structures into variant specific versions. These will be moved into the variant tree in a follow-on patch - Set GENINT_DISABLE bit - Disable interrupts for this GPIO. BUG=b:71867096 TEST=Build and boot grunt. Verify registers are set correctly. Change-Id: I4b8d12720167b298ee6e0acf80edf414539975b0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23228 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-13soc/amd/stoneyridge: Add definition for GENINT_DISABLEMartin Roth
BUG=b:71867096 TEST=None Change-Id: Ic8111d34355e6667c37a51d285ebb50c1659f4e5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23227 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-13mainboard/google/kahlee: Fix GPIO tableMartin Roth
The GPIOs that are being set low had the wrong value getting set. FCH_GPIO_OUTPUT_VALUE was being set instead of FCH_GPIO_OUTPUT_ENABLE. BUG=b:70234300 TEST=Build and boot Grunt Change-Id: I16792b76252506a43aac92738b04096ae3fde01c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-01-13google/kahlee/grunt: Add grunt touchpad ASLDaniel Kurtz
Grunt and Kahlee touchpads are on different i2c busses; I2CC and I2CD, respectively. Since grunt is the 'baseboard', put its configuration under baseboard, and include it from the grunt variant. BUG=b:71820409 TEST=Boot grunt to kernel, use evtest to test trackpad. TEST=Boot kahlee to kernel, use evtest to test trackpad. Change-Id: I1aeacf9a840342e73c1e219a825b39a124b4dd57 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23232 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-13google/kahlee/grunt: Add Grunt audio codec ASLDaniel Kurtz
Grunt and Kahlee have different audio codecs. Create a new audio .asl for the baseboard for grunt's codec, link to it from the grunt mainboard, and move the kahlee codec table from the baseboard mainboard to its own .asl in variant/kahlee. Note, we can't use the generic drivers due to the PCI scope expectation. The AMD I2C are not PCI devices. BUG=b:69397774 TEST=Codec driver loads. Check dmesg. Change-Id: I1cc245357d1f3d444e5a5012466eaa5d75d637eb Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23226 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-13google/kahlee/grunt: Move ASL to variantsMarc Jones
Move the apci/ to the baseboard and move mainboard.asl to each variant. BUG=b:71873651 TEST=build BRANCH=none Change-Id: I8a829f2946e4b280cd78574eb8dbda6c2a9a1028 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23229 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-01-13soc/amd/stonyridge: Give I2C devices unique _UIDsDaniel Kurtz
The ACPI unique identifier (_UID) should be unique. This doesn't actually matter much for Linux, though, since the kernel can handle it when the BIOS doesn't get this right. See: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b4b6cae2f36d92b31788f10816709d5290a1119a b4b6cae2f36d ACPI / platform: use ACPI device name instead of _HID._UID Change-Id: I8b1b3143174584a93f3d45bf482b8922b3f0ec12 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-01-13Revert "soc/amd/common/pi: Fix issue in AGESA heap allocator"Marc Jones
This reverts commit 0f5651584ebb8e2ccfa151275bfd2f70e74bae9b. This is not the correct fix for the heap allocator. It looks like the root cause is in the buffer size of the deallocate function. Change-Id: I33c479a30d89a665677d3e4914194ae8136504af Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23245 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-13mainboard/google/zoombini/variants/meowth: set GPD_2 to NF1Nick Vaccaro
Meowth uses GPD_2 as a dedicated lan_wake pin, so GPD_2 must be set to use NF1 instead of gpio. BUG=b:64395641 BRANCH=none TEST=none Change-Id: Iadf7158a792dfae0ea5e824d197a558524cdb5fd Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12mb/compulab/intense_pc: Change devicetree to correct CPU socketHal Martin
Intense PC uses FCBGA1023 socket, not rPGA989. Correct the socket in the devicetree. Change-Id: Ie657af2f51dfb7add90b19b26c0c37d312d59821 Signed-off-by: Hal Martin <hal.martin@gmail.com> Reviewed-on: https://review.coreboot.org/22762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-01-12mb/compulab/intense_pc: enable SuperIO UARTHal Martin
Enable the UART via SMSC SIO1007 SuperIO, this allows you to see boot boot messages from coreboot over the integrated RS-232 port (requires use of included dongle). Change-Id: I11a4c532ed73a0cf27d6e7bef6e04035c3942567 Signed-off-by: Hal Martin <hal.martin@gmail.com> Reviewed-on: https://review.coreboot.org/22737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-12mainboard/hp: Add Elitebook Revolve 810 G1Bill XIE
The code is based on autoport and that for 8470p. Tested: - CPU i5-3437U - Slotted DIMM 8GiB - Soldered RAM 4GiB from Hynix (There may be more models here) - Onboard USB2 interfaces (digitizer, wlan slot, wwan slot, camera) - Mini pci-e on wlan slot - On board SDHCI connected to pci-e - USB3 ports - USB3 hub on dock (connected to USB3 port 1) - NVRAM options for North and South bridges - S3 - TPM1 on LPC - Linux 4.13.13-1 within Debian GNU/Linux testing, loaded from SeaBIOS, or Linux payload (Heads) Not work: - An "NFC" device connected to LPC Not implemented yet: - Detecting the model of Soldered RAM at runtime, and loading the corresponding SPD datum (3 observed) from CBFS Change-Id: Iba9c361591697e6a2b3b7b485f7f1649c2a83524 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-12mb/google/poppy/variants/nami: Fix DA7219 IRQ issueKaiyen Chang
Change PAD_CFG_GPI_GPIO_DRIVE to PAD_CFG_GPI_APIC for GPIO D9 to meet the requirement of DA7219 IRQ pin. BUG=b:70646770 BRANCH=none TEST=Use aplay and arecord to verify headphone function. Change-Id: Id6cff8325c4c7f02f6f4df547fde286e2ef83d5c Signed-off-by: Kaiyen Chang <kaiyen.chang@intel.com> Reviewed-on: https://review.coreboot.org/23160 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-12soc/intel/common/block: Check for NULL before dereferenceShaunak Saha
We check for NULL from the return of function acpi_device_path before passing it to acpigen_write_scope to avoid NULL pointer dereference. Change-Id: I997461c9b639acc3c323263d304333d3a894267c Found-by: Klockworks Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/23094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12soc/intel/skylake: Override KBL IccMax settingsGaggery Tsai
According to Intel document #559100 KBL EDS v2.8, section 7.2 DC specifications, the IccMax setting for KBL-U, KBL-U42 and Celeron/Pentium are different. This patch overrides the IccMax settings for KBL-U/R/Y since device tree could not handle all KBL-U/R combinations when multiple SKUs are adopted in a project. Besides, it is inefficient to maintain the same code for all variants. Hence, place it in the common code so that all variants could leverage the benefits. +----------------+-------------+---------------+------+-----+ | Domain/Setting | SA | IA | GTUS | GTS | +----------------+-------------+---------------+------+-----+ | IccMax(KBL-U/R)| 6A(U42) | 64A(U42) | 31A | 31A | | | 4.5A(Others)| 29A(Celeron) | | | | | | 32A(i3/i5) | | | +----------------+-------------+---------------+------+-----+ | IccMax(KBL-Y) | 4.1A | 24A | 24A | 24A | +----------------+-------------+---------------+------+-----+ BUG=b:71369428 BRANCH=None TEST=Remove icc_max setting from devicetree & emerge-fizz coreboot chromeos-bootimage & Ensure the KBL-U42, KBL-U22 and Celeron SKUs are identified correctly and IccMax settings are passed to FSPS correctly. Change-Id: I291462b73d3fbd17f17975de7fd77dc48ca99251 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-12ec/lenovo/h8: Add support for bluetooth on wifiPatrick Rudolph
The EC does enable bluetooth on wifi cards and BDC at the same time. Check the new Kconfig to support bluetooth on wifi in case no BDC is installed and the BDC detection fails. Change-Id: I23f14c937252a296dc543db49ec9e093e7e24604 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-12mb/google/fizz: update DPTF settingsKevin Chiu
TCPU: _CRT: 100 _PSV: 93 _TRT: 100/5(s) TSR0: _CRT: 83 _PSV: 70 _TRT: 100/10(s) TSR1: _CRT: 73 _PSV: 67 _TRT: 100/30(s) TCC: 6 for 94'C PL1: max: 15W min: 3W BUG=b:70294260 BRANCH=master TEST=build Change-Id: Ie17f4395d2199009fd68a600d818f2be54bc8935 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/23155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-12mb/google/fizz: Disable PCH LanKane Chen
Fizz has external Lan on PCIE port. The Lan device on PCH is not used. BUG=b:70889517 Change-Id: I99894bedec14a44724ac7c22d0c894132a795b78 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/23180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12mainboard/glkrvp: Add EC_GOOGLE_CHROMEEC_SWITCHESShaunak Saha
This patch adds the EC_GOOGLE_CHROMEEC_SWITCHES option so that we use the common switch.c file Change-Id: I93a2ba63015db17989c89ce1b5897de6a93e201f Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/23131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-12mainboard/glkrvp: Add RECOVERY_CACHESrinidhi N Kaushik
This patch adds recovery cache. TEST:glkrvp boots with this change and also FAFT test firmware_CorruptRecoveryCache passes. Change-Id: I9b32628d814693fb0591fc3750348d48cf9e26f1 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/23067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-12mb/google/poppy: Remove digitizer reset control from ACPIFurquan Shaikh
Digitizer power is not controlled by SoC. Also, since the digitizer uses I2C-HID driver in Linux kernel, the device is put into sleep anytime system is suspended. Thus, there is no need to control the reset gpio using ACPI power resource. TEST=Verified that digitizer device is properly detected on boot-up and after suspend/resume. Change-Id: Id11b8412d0ac48b2701d53b0a22ad3b747b544ec Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12mb/intel/kblrvp: Use common HDA codeDuncan Laurie
Instead of duplicating code in each mainboard that supports HDA use the common driver and provide the HDA verb table. This was compile tested for both variants with "abuild -t intel/kblrvp" Change-Id: Ie3bab7aabcfa040935062b7764853df8fb19b04d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12soc/intel/common: Add Intel HDA common block driverDuncan Laurie
There is common HDA code in soc/intel/common that provides generic HDA support functions, but it does not provide a driver. This change adds a common block driver for HDA that provides a ramstage driver for SOCs that need to initialize an HDA codec. This was tested on a board with an HDA codec to ensure that it properly detected it and ran the codec init steps. Change-Id: I41b4c54d3c81e1f09810cfaf934ffacafca1cf38 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-12amd/stoneyridge: Keep SPI flash cacheable during POSTMarshall Dawson
A side effect of using the common MTRR assignment code is the flash device loses its WP setting and is no longer cacheable. After MTRR setup, reenable the setting for the duration of POST. TEST=Run on Kahlee and inspect MTRRs prior to AmdInitLate() BUG=b:70536683 Change-Id: Ib4924e96e2876e1e92121bb52d1931ead723d730 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-01-12mb/google/poppy/variants/nautilus: enable digitizer pen deviceSeunghwan Kim
- Add pen device property into devicetree.cb. - Set GPP_C9 to 0 as default. BUG=none BRANCH=master TEST=emerge-nautilus coreboot and check pen device operation Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: I050671c8b46fd92b1dd9164be2646727cd67da9f Reviewed-on: https://review.coreboot.org/23010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-12soc/amd/common/pi: Fix issue in AGESA heap allocatorMarc Jones
The heap allocator would try to split a buffer node that was too small for another node. In the failing case, the buffer node was 0x140 bytes and the requested size was 0x133 bytes. The logic would check that there was room for the header and buffer and try to split the buffer node. The buffer node header is 0xC bytes, so 0x13F bytes are need. The problem is that it didn't leave room for another node header and a little space for a buffer. BUG=b:71764350 TEST= Boot grunt. BRANCH=none Change-Id: Iece5e12d5787415a335bb953985331a5dc312152 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2018-01-12mainboard/google/kahlee: Enable PCIe Lane 2Martin Roth
The Port initializer had been changed from PortDisabled to PortEnabled, but engine inializer hadn't been updated from PcieUnusedEngine to PciePortEngine. Update this so the port works. Also change disabled port to PcieUnusedEngine. BUG=b:71818026 TEST=PCIe device now shows up on D2F4 Change-Id: I11eb8c1fbad12fa9cf34d758a4ef3c22ef8ba4f7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23210 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Chris Ching <chingcodes@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-11google/fizz: Dynamically set PsysPl2 MSR if using type-C chargerShelley Chen
If using type-C charger, then PsysPl2 may be lower than barrel jack value of 90W, so need to override value to the max power of type-C charger. BUG=b:71594855 BRANCH=None TEST=Make sure that PsysPL2 value set to 60W with zinger, but 90W when using proper barrel jack adapter on and i7. Change-Id: If955b9af0e23f47719f001f1d73ec37113937cea Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/23182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-11intel/fsp2_0: Set boot mode default as per s3wake statusAamir Bohra
Currently bootmode default is set to FSP_BOOT_WITH_FULL_CONFIGURATION and bootmode UPD is updated in fsp_fill_mrc_cache based on mrc cache data validity. With current implementation in S3 resume path, if mrc cache data is invalid, the bootmode is not updated further and remains set at FSP_BOOT_WITH_FULL_CONFIGURATION. This results in fsp-m to get incorrect boot mode context and reinitialize memory in S3 resume path. In correct flow fspm should have correct bootmode context i.e. S3 resume and return error in case mrc cache data is invalid or not found. BUG=b:70973961 BRANCH=None TEST=Verify correct bootmode is set on S3 resume, even when mrc cache data is invalid. Change-Id: Idc0da6ffbfe5ce616d852908a9b0074dc8ce7cbe Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/23156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-11intel/fsp2_0: Issue hard reset in S3 resume for invalid mrc cache dataAamir Bohra
In S3 resume, for cases if valid mrc cache data is not found or RECOVERY_MRC_CACHE hash verification fails, the S3 data pointer would be null and bootmode is set to BOOT_WITH_FULL_CONFIGURATION. This gets memory to be retrained in S3 flow. Data context including that of imdr root pointer would be lost, invoking a hard reset in romstage post memory init. Issuing hard reset before memory init, saves fsp memory initialization and training overhead. BUG=b:70973961 BRANCH=None TEST=Verify S3 resume flows on soraka. Change-Id: Ibd6d66793ed57c2596d9628c826f6ad198aad58b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-11mainboard/google/zoombini: map EC io space in devicetree.cbNick Vaccaro
BUG=b:64395641 BRANCH=none TEST=none Change-Id: I92969384cd32766be4595494aa70b4eb9c74f099 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-11mainboard/google/zoombini: add gpio init to ramstageNick Vaccaro
-add initialization of gpio table to mainboard_silicon_init_params() -fix input parameter type for mainboard_silicon_init_params() for FSP2_0. BUG=b:69011806 BRANCH=chromeos-2016.05 TEST=none Change-Id: If8cba786a127a8704eb240380841362e3eb06552 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-11mainboard/google/zoombini/variants/meowth: map EC io spaceNick Vaccaro
Map EC io space in devicetree.cb BUG=b:69011806 BRANCH=none TEST=none Change-Id: Ic3806b5f9b7bf272a77360060cd71db9a03d5763 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-11mainboard/google/zoombini/variants/meowth: Disable EC SW syncNick Vaccaro
BUG=b:69011806 BRANCH=chromeos-2016.05 TEST=Compiles successfully using "./util/abuild/abuild -p none -t google/zoombini -x -a" Change-Id: I8276fa26af664557e9964cb6b8a5a076eacdf00c Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-11mainboard/google/zoombini: add ec.c and ramstage.c to buildNick Vaccaro
-add ec.c to bootblock if CONFIG_EC_GOOGLE_CHROMEEC -add ramstage.c to ramstage. BUG=b:69011806 BRANCH=chromeos-2016.05 TEST='emerge-meowth coreboot' compiles correctly. Change-Id: I7ec1e22339f3e4d9a8d83093bcc2ce725c9c99e7 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-11mainboard/google/zoombini/variants/meowth: fix gpio settingsNick Vaccaro
-change GPP_C12 (H1 IRQ) to use GPI_SCI_LOW and level triggered -set gspi gpios to no connects if CONFIG_ZOOMBINI_USE_SPI_TPM not set BUG=b:69011806 BRANCH=chromeos-2016.05 TEST='emerge-meowth coreboot' succeeds Change-Id: Ida1d1050db12982c3c497656162cc84c62a77f70 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-11mainboard/google/zoombini: enable USB and assign acpi irqNick Vaccaro
-add USB2 and USB3 to devicetree -add TPM_TIS_ACPI_INTERRUPT to Kconfig -map gpe0_dw0, gpe0_dw1, and gpe0_dw2 blocks BUG=b:64395641 BRANCH=chromeos-2016.05 TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: Ia7ed76591d9d8d94bbf5652313c478495ce005fa Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-11mainboard/google/zoombini: fix spd makefilesNick Vaccaro
The spd.bin file was not getting generated properly, so moved logic to variant's makefile. BUG=b:64395641 BRANCH=none TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully and spd.bin is found when booting. Change-Id: I4642d6ddb5e65f721d1bde31ca0ca5b4438da554 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-10soc/rockchip/rk3399: Ensure full eDP init sequenceEge Mihmanli
This patch fixes 2 edp display issues: 1. When rk_edp_prepare fails >3 times, edp_init isn't run because while-condition is not satisfied. Then, only a partial init sequence is ran. This causes all aux transactions to fail. 2. If rk_edp_prepare never succeeds, coreboot never leaves link training stage due to infinite loop. Boot process is stuck. TEST=Boot past eDP initialization stage and make sure AP logs don't have show aux transaction fails. Change-Id: I44c3f53e8786558c43078d4afe9acde4d64796e7 Signed-off-by: Ege Mihmanli <egemih@google.com> Reviewed-on: https://review.coreboot.org/23152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-01-10soc/intel/cannonlake: Add a call to gspi_early_bar_init in bootblockFurquan Shaikh
This change adds a call to gspi_early_bar_init in bootblock to allocate a temporary BAR for any GSPI buses that are accessed before resource allocation is done in ramstage. Change-Id: I82387a76d20fb272da6271dd9e5bf2c835d5b146 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22781 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-10soc/amd/common/block/acpi: Add halt.cChris Ching
Creating initial common acpi and implement halt.h BUG=b:71575631 BRANCH=none TEST=put poweroff() call in Kahlee's mainboard_final and board turns off correctly Change-Id: Ie7dd9851dcb240c53f2487b4f4b8a3e51d6b98d6 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/23074 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-10mainboard/google/kahlee: Update SPD MakefileMartin Roth
The .spd.hex text is added to the name by the build process. This was causing a failure because we were trying to add the files: 'file.spd.hex.spd.hex' to the build. Remove the additional .spd.hex text. BUG=b:71535311 TEST=Build Change-Id: I11df7a90c979503676a66c6502900a13f1a8e359 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23189 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org>
2018-01-09mb/google/fizz: Turn off SATA SALPKevin Chiu
turn off SATA SALP to prevent 0x5A/0x5B error on Sandisk SSD in below conditions: 1. reboot stress 2. FAFT BIOS qualification BUG=b:70146894,b:69984821,b:70590720 BRANCH=master TEST=pass firmware_ConsecutiveBoot 2500 loops FAFT BIOS test pass Change-Id: I5d57dd8ef256d5f0a1027ab77f63da62c6c9ce74 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/23153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-01-09mainboard/google/zoombini/variants/meowth: add new boardNick Vaccaro
Add Meowth board, which derives from Zoombini, a CNL reference board. BUG=b:69011806 BRANCH=master TEST=Compiles successfully using "./util/abuild/abuild -p none -t google/zoombini -x -a" and boots Meowth. CQ-DEPEND=CL:22908 Change-Id: Ie6ed7ebb4a00a87fc93fc694d74c08a716380a54 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/22401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-01-09mainboard/google/zoombini: Provide memory configuration variant APINick Vaccaro
Add support for memory configuration by providing weak implementation from the baseboard. All SPD files are present under spd/ directory. SPD_SOURCES must be provided by the variants to ensure that required SPD hex files are included in the SPD binary. BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I449ab56dfc7a75752944b58ba6291b5ee32f81ad Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/22205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-01-09soc/intel/cannonlake: Remove redundent CNL CPUID macrosSubrata Banik
This patch ensures all CannonLake CPUIDs are part of mp_init.h hence remove duplicate macro definitions from SoC code. TEST=Build and boot CannonLake RVP Change-Id: Ibb6a22d5c708248bb53522f906cffb462142b7bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-09mb/google/poppy: Add internal pull-up on pen eject signalFurquan Shaikh
Since the current hardware revision does not have external pull on the pen eject signal, this change adds internal pull-up on it. Change-Id: I426d9833d7efbd8735b6f2b4896d1012b62cb4b8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/23143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tony Lin <tonycwlin@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-08soc/amd/stoneyridge/i2c: fix formatting and global symbolAaron Durbin
The i2c_bus_address array doesn't need to be a global symbol. Also, the array initializer had some weird indention and there was an extra new line. For consistency the first entry is multiplied by 0 so the formatting is similar. BUG=b:69416132 Change-Id: I74f6dca3a22a245759536f792ce04ac61735b6d0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-01-08google/gru: switch to spi2 for all scarlet based boardsEge Mihmanli
Rainier, a scarlet derived board, was configured to use spi0 for tpm driver by default. This patch switches it to spi2 to reflect recent changes in scarlet-derived boards. Change-Id: Ib67109786512c068bb957890f456bccff7addc86 Signed-off-by: Ege Mihmanli <egemih@google.com> Reviewed-on: https://review.coreboot.org/23129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-08soc/intel/cannonlake: Initialize DDI-A lane in Normal modeAbhay Kumar
Enable DDI-A (eDP) when pre-OS graphics is not Loaded or in normal mode. This will make sure that kernel will detect eDP. TEST=Edp should come up in normal mode. Change-Id: I6353020f892f2d7b75997eace88b3074adc32aef Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/22799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-08soc/amd/stoneyridge: Define CONSOLE_UART_BASE_ADDRESSArthur Heymans
The build system for the SeaBIOS payload needs this when DRIVERS_UART_8250MEM is set. Set it to the first uart controller, which the coreboot code also seems to do. Fixes: https://ticket.coreboot.org/issues/150 Change-Id: I962f750f89e0352082e0b7415ceaa9bd350fdf0b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-07superio/ite/it8623e: add support for SIO chip ITE IT8623EGergely Kiss
This change adds basic support for the SuperIO chip ITE IT8623E. Due to the lack of a datasheet, defaults are shown as "not available (NA)" in superiotool's register dump. LDNs defined in it8623e.h are definitely correct and working as expected. Change-Id: I05832c4db7ab59541337f11200640316376e792e Signed-off-by: Gergely Kiss <mail.gery@gmail.com> Reviewed-on: https://review.coreboot.org/23001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-07soc/amd/common: Only load post-memory AGESA into RAM when split enabledDaniel Kurtz
CONFIG_AGESA_SPLIT_MEMORY_FILES controls whether AGESA is split into pre- and post-memory binaries when it is built. Building AGESA this way is required when doing the new "load post-memory AGESA binary into ram" feature. Thus, condition this new path on the CONFIG option being enabled. BUG=b:71641792 TEST=build and boot kahlee with CONFIG_AGESA_SPLIT_MEMORY_FILES disabled Change-Id: Ibec9db67437c57092e0f7acf0e3185865dc02688 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23141 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-07soc/intel/cannonlake: provide LPDDR4 memory initNick Vaccaro
Instead of having the mainboards duplicate logic surrounding LPDDR4 initialization provide helpers to do the heavy lifting. It also handles the quirks of the FSP configuration which allows the mainboard porting to focus on the schematic/design. BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I4a43ea121e663b866eaca3930eca61f30bb52834 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/22204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-073rdparty/blobs/soc/amd/stoneyridge: Use new location of stoneyridge blobRichard Spiegel
Stoneyridge related contents of 3rdparty/blobs/southbridge/amd/kern were moved to 3rdparty/blobs/southbridge/amd/stoneyridge. Commit the new blob to coreboot, and modify src/soc/amd/stoneyridge/Kconfig to use it. BUG=b:69613465 TEST=Build and run kahlee. Change-Id: I1784824dc7767c620e2fcbad7c6e5674934832ff Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-07mainboard/ms7721: Fix temperature sensor configurationRenze Nicolai
This patch allows temperature sensors 1 and 2 to function by setting their type to be thermistor instead of BJT. Change-Id: I6491171eacc0c9848ba86ba7a62ec440226aae36 Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-on: https://review.coreboot.org/22922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-07mainboard/nf81-t56n-lf: Add temperature sensor configurationRenze Nicolai
This patch adds the temperature sensor type device tree setting, configured to be the default value as stated in the Fintek f71869ad datasheet on page 60. bit 7-4: reserved (0) bit 3: T3_MODE 1 (default) = BJT, 0 = thermistor bit 2: T2_MODE 1 (default) = BJT, 0 = thermistor bit 1: T1_MODE 1 (default) = BJT, 0 = thermistor bit 0: reserved (0) This results in a default value of 0x0E This change is needed to make sure behaviour does not change after applying change 22935 which adds the temperature sensor type devicetree configuration option Change-Id: I42980988267621def6576f771f1d8a853500e867 Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-on: https://review.coreboot.org/22966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-07superio/f71869ad: Add temperature sensor typeRenze Nicolai
This patch makes it possible to set the "Temperature Sensor Type Register" at index 6Bh from the devicetree, allowing the use of thermistors instead of BJT type sensors. Register documentation (from page 60 of the F71869 datasheet): 6.6.25 Temperature Sensor Type Register - Index 6Bh Bit 7-4: reserved Bit 3: T3_MODE (0: thermistor, 1: BJT [default]) Bit 2: T2_MODE (0: thermistor, 1: BJT [default]) Bit 1: T1_MODE (0: thermistor, 1: BJT [default]) Bit 0: reserved Change-Id: I6af0d93061ec49aec7a9181cdf7affd60fbdca73 Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-on: https://review.coreboot.org/22935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-07intel/dcp847ske: Add superio ACPI declarationsTobias Diedrich
Tested on Linux 4.13.14: SuperIO resources show up as reserved in /proc/ioports and friends. Change-Id: I0363816fe048579413f1325dcfc9a6a8a9e48123 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-07nuvoton/nct6776: Add ACPI declarationsTobias Diedrich
Add ACPI declarations to be incorporated into ACPI tables for mainboards with this super I/O. Tested on Intel NUC DCP847SKE, Linux 4.13.14. Change-Id: Idb76b2e99e90a213e2695efc1afd4fa9069c134f Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-06superio/ite: add missing pnp_conf_mode fields in ops structFelix Held
This fixes the bug that the LDNs on the affected SIO chips didn't get configured, since the config mode wasn't entered. Change-Id: Ic468847571e164e4e1280428f08fc067b724464e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-05mainboard/google/zoombini: Add SoC acpi files to dsdt.aslNick Vaccaro
BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: I417a1c606e4968120414af57aa3b17d5c3b3cad0 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-01-05mainboard/google/zoombini: Fix some devicetree pci settingsNick Vaccaro
- Enable I2C #2, #3, and #5 - Enable UART #2 - Enable GSPI #0 and #1 - Disable SATA - Set pci 1f.0 to chromeec BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: Ie29652beff36f19a59746a1ad5f8e7f995ef1281 Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-05mainboard/google/zoombini: add mainboard_opsNick Vaccaro
Add mainboard.c to ramstage. BUG=b:64395641 BRANCH=None TEST=Verify "./util/abuild/abuild -p none -t google/zoombini -x -a" compiles successfully. Change-Id: Ic7275b07f28a99a91b978d2e8c4118c6858705bc Signed-off-by: Nick Vaccaro <nvaccaro@chromium.org> Reviewed-on: https://review.coreboot.org/23032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-05vendorcode/intel/fsp/fsp2_0/glk: Update header files as per v77_12Srinidhi N Kaushik
Update FSP header files to match FSP v77_12 Following fields have been added in FSP-S UPD: - SkipPunitInit (Skip P-unit Initialization) - HgSubSystemId (Sub system Vendor ID VGA) Change-Id: I6c4c2580b2d0d76038b495be31744c04cc0dc959 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/22820 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-01-05sb/intel/i82801ix: Don't select HAVE_INTEL_FIRMWARE on Q35-QEMUArthur Heymans
The Qemu q35 target doesn't support or needs Intel Firmware blobs so it doesn't make sense to select that option on this hardware. The result of this change will be that when changing the ROM chip size, CBFS_SIZE will automatically fill the whole flash which is desirable in this case. Change-Id: I89b0c2a7b3e9c163ce4b4eb5b38ab5fa70ba3cfa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23090 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-01-05mainboard/google/kahlee: Update Grunt devicetree.Justin TerAvest
Grunt's devicetree dropped some entries when it was split from the kahlee variant. This commit restores: spd_addr_lookup - memory information for AGESA dram_clear_on_reset - keeps DRAM contents on reset uma_mode - needed for vbios uma_size - needed for vbios Change-Id: I1d8cdc97594867f1d706318370055087976a5104 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-05soc/intel/cannonlake: Correct PMC/GPIO routing informationLijian Zhao
PMC and GPIO DWx definition is not identical, hence update that to correct information. For cannonlake lp PCH, GPIO group C, group E and group GPD is different for PMC GPIO_CFG and GPIO MISCCFG. Also add function call to set up GPE routing in bootblock stage. TEST=Boot up into OS, and manually check PMC GPE status Change-Id: I1edb83edabc72e8a762b129cf51dcd936cd37ddf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-01-05nb/intel/x4x: Disable watchdog, halt TCO timer and clear timeoutArthur Heymans
Especially on ICH7 failing to do so results in i2c block read being unusable. On ICH10 this problem doesn't manifest itself that much. This moves disabling the watchdog reboot to the northbridge code like i945 (even though it technically is southbridge stuff). TESTED on Intel DG41WV: hacking on raminit is much nicer since no need to do a hard power down for +4s are needed to clear the timeouts. Change-Id: Icfd3789312704f61000a417f23a121d02d2e7fbe Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-05soc/amd/common: load post-memory AGESA as rmoduleAaron Durbin
Now that the AGESA binary is split into two sections load the post-memory AGESA binary into ram. It needs to be an rmdoule so that it can be relocated into ram. agesawrapper_amdinitenv() entry CBFS: 'VBOOT' located CBFS at [10000:cfd40) CBFS: Locating 'AGESA_POST_MEM' CBFS: Found @ offset 875c0 size 11c5e Decompressing stage AGESA_POST_MEM @ 0xc757ffc0 (183452 bytes) Loading module at c7580000 with entry c7580000. filesize: 0x2bafc memsize: 0x2bb0d Processing 1112 relocs. Offset value of 0xc7780000 AGESA call 00020001 using c75818fe AGESA call 00020003 using c75818fe Fch OEM config in INIT ENV Done agesawrapper_amdinitenv() returned AGESA_SUCCESS BUG=b:68141063,b:70714803 TEST=Booted kahlee. Change-Id: Ic0454e0d6909cb34ae8be2f4f221152532754d61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-05soc/amd/common: Allow AGESA file split for pre- and post-memoryJustin TerAvest
By splitting the binary files for platform initialization, the post-memory code can be modified to stop executing in place (--xip). This change creates two separate sections in CBFS for AGESA and loads the appropriate file at the correct stage. BUG=b:68141063 TEST=Booted kahlee with split agesa enabled. Change-Id: I2fa423df164037bc3738476fd2a34522df279e34 Signed-off-by: Justin TerAvest <teravest@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-03soc/amd/stoneyridge: Add I2C supportChris Ching
BUG=b:69416132 BRANCH=none TEST=make Change-Id: Id940af917c9525aba7bc25eea0821f5f36a36653 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-02soc/amd/common/block/pi: Format files to standardsRichard Spiegel
Files agesawrapper.c and heapmanager.c have several non-conformity with coreboot standards, including lines longer than 80 characters, use of "} else {" after a return and wrong comment block formatting. Fix all such issues, so that it passes commit tests. BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, just file formatting). Change-Id: Iefe741cd62bc41a7975c3dd10ac9355352de3abb Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-02mb/google/poppy/variants/nami: Add empty_ddr4.spd.hex for DDR4Kane Chen
The spd size of DDR4 is 512, but the size empty.spd.hex is 256. With empty.spd.hex and DDR4, it will cause mainboard_get_spd_data loads spd data incorrectly due to the offset is wrong. Change-Id: Iea3f216898525a2a602fabf1835c8a0c1245ee57 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/23038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-02google/fizz: Enable SataPwrOptEnable FSP UPDKane Chen
This change is to enable SataPwrOptEnable. With this change, we no longer see SError message in kernel during suspend_stress_test. BUG=b:70491485 Change-Id: Ieb991f6889c5ff3181a670bc7702314049fa983c Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/23019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-02soc/intel/skylake: Add device setting for sata power optimizationKane Chen
This change provides option in devicetree and feeds the option to FSP SataPwrOptEnable UPD for power saving purpose BUG=b:70491485 Change-Id: I9099c5c97765a118bdee64da303cb3ba6ceb951b Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/23018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-25mb/hp: Add CMOS support for all HP Elitebook modelsIru Cai
The cmos.layout files are copied from lenovo/x230 with EC options removed. It's tested on 8470p and the power_on_after_fail option works. Change-Id: I0a50a25798fd31b7acccf9872c50dac2718ce895 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/22842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-25ec/hp/kbc1126: change the default offset of the blobsIru Cai
Using Kconfig options USE_OPTION_TABLE, BOOTBLOCK_NORMAL makes the bootblock to 4200 bytes, so the offsets of these blobs need to be put at a lower address. Change-Id: I8754e43ff318a03447633f7a9a8326d315328607 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/22978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-24drivers/mrc_cache: Make CACHE_MRC_SETTINGS not selectableArthur Heymans
Don't allow the user to select this manually, since it doesn't build on platforms that don't use it. Don't set the bool value so that it doesn't show as not selected in the .config file of platforms that don't use this. Change-Id: Icf026a297204868d485be270ccee7e0bec0ac73b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-23soc/intel/cannonlake: Select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2Furquan Shaikh
BUG=b:70628116 Change-Id: I40ebbb143b4618f83f454b9db2717589ba5ce99e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22956 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-23soc/intel/common/block/gspi: Add SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2Furquan Shaikh
Even though kaby lake and cannon lake are using the same GSPI controller, bit meanings (for polarity and state) in SPI_CS_CONTROL register are significantly different. This change provides a new Kconfig option that can be selected by SoCs using these new bit definitions of SPI_CS_CONTROL. Common code takes care of setting the right value for polarity and state field depending upon the version selected by SoC. BUG=b:70628116 Change-Id: Ic69321483a58bb29f939b0d8b37f33ca30eb53b8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-23soc/intel/{apollolake, cannonlake, common, skylake}: Add _soc_ prefix in ↵Subrata Banik
weak function This patch ensures all soc function name is having _soc_ prefix in it. TEST=Able to compile SMM common code for all supported SOC. Change-Id: Iab1b2f51eaad87906e35dbb9e90272590974e145 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22mb/intel/dcp847ske: remove reference to non-existent fileAaron Durbin
In commit 7a95204 (intel/dcp847ske: Add Intel NUC DCP847SKE) the default_irq_route.asl file was removed, but this mainboard was missed. Follow suit with the original intent of the commit and fix the build breakage. Change-Id: I909dad7cfc0fab37e29187b2358f7f056216a403 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22975 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-22purism/librem_skl: Improve boot time by enabling SPD Word ReadYouness Alaoui
This speeds up the SPD read ('calling FspMemoryInit' phase) from 218ms to 134ms consistently. Tested on both the Librem 13 v2 and Librem 15 v3. Change-Id: I44fbe96c256972bd074537159771d61fe7adf082 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-12-22soc/amd/stoneyridge/chip.c: Move setup_bsp_ramtop to soc_init()Richard Spiegel
Issue first reported at commit 1587dc8a2b, the call of functions setup_bsp_ramtop() and setup_uma_memory() should be moved from enable_dev() to soc_init(). The function setup_uma_memory() no longer exists, its functionality transfered to agesawrapper_amdinitpost. Move setup_bsp_ramtop() as required. BUG=b:62240756 TEST=Build and boot kahlee. Change-Id: I44e6cab17a8f7f364fc57657f41b211ec9d17641 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-22soc/intel: Treat time-out as failure in HECILijian Zhao
If HECI gets times out when waiting for read slots, there's no need to read back reply message to decide if the HECI recieve successed or not. Otherwise, system will stuck after global reset required. BUG=b:707290799 TEST=Boot up meowth board without battery, and confirm hard reset got trigged after heci time out. Change-Id: I7c1655284d7027294d8ff5d6a5dbbebe4cbd0c47 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22intel/dcp847ske: Add Intel NUC DCP847SKETobias Diedrich
https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE Created using autoport and manual edits. mainboard_fill_pei_data copied and adjusted from samsung/lumpy. Tested: - RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V). - RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V). - SeaBIOS stable payload. - Linux 4.13.14 payload. - Booting into Linux 4.13.14 with Debian/unstable installed on the internal mSATA slot. - Non-native raminit (works). - Native raminit - KVR1333D3S9 doesn't work. - KVR16LS11 only works at 1.5V. - Native VGA init, HDMI port detection with libgfxinit. - Basic ACPI functions (power button event; power-off; reboot). - Suspend to RAM and resume works. - PCIe WLAN in half-minicard slot. - USB device in half-minicard slot. - PCIe device in full-minicard slot. - mSATA device in full-minicard slot. - Fan spins up/down in response to CPU load. Known issues: - Native raminit fails timC calibration with the RAM I have. - Technical Product Specification mentions overcurrent protection for back panel and front panel USB connectors, but I haven't been able to trigger it with either native fw or coreboot (tried up to 2.5A load). Untested: - USB debug port. Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-22mb/google/fizz: revise LED0 behavior for link speed 100MbGaggery Tsai
This patch revises LED0 Green light behavior from patch 2ecf3f8c. For 100Mb link speed, LED0 should be OFF. BUG=b:65437780, b:68284778, b:69950854, b:65808944 BRANCH=None TEST=Run DUT with 100Mb and 1000Mb ethernet connection and observe LED0 is behaving as expected. Change-Id: Ia805c955711b8ce77eba087a28427a005c456fa1 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/22964 Reviewed-by: David Wu <david_wu@quantatw.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-22amd/stoneyridge: Increase pre-cbmem console sizeMarshall Dawson
The existing stoneyridge pre-cbmem console log contains about 250 bytes of unused space. Increase this amount to accomodate any additional debug messages. BUG=b:64980233 TEST=Build and boot Kahlee, inspect console log with "cbmem -c" Change-Id: Ia307795e91d81ff9b2be027916081f6824f90bad Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion supportDivya Chellap
New UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to configure clock source number of PCIe root ports. This UPD array is set to clock source number(0-6) for all the enabled PCIe root ports, invalid(0x1F) is set for disabled PCIe root ports. BUG=b:70252901 BRANCH=None TEST= Perform the following 1. Build and boot soraka 2. Verify PCIe devices list using lspci command 3. Perform Basic Assurance Test(BAT) on soraka Change-Id: I95ca0d893338100b7e4d7d0b76c076ed7e2b040e Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22vendor/intel/skykabylake: Update FSP header files to version 2.9.2Balaji Manigandan B
There is a new UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to configure clock source(s) of PCIe Root Ports. This UPD is used to disable clock source(s) of disabled PCIe Root Port which has active device connected. CQ-DEPEND=CL:*520658,CL:*520659 BUG=b: BRANCH=None TEST= Build and boot soraka Change-Id: Ia4e4d22be8b00a72de68ddde927a090d3441a76e Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com> Reviewed-on: https://review.coreboot.org/22692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-22ic2/designware: Move Intel i2c logic to shared driverChris Ching
BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/amd/stoneyridge: select RTCMarc Jones
Stoneyridge has an RTC. Elog requires it for timestamps. BUG=b:65485690 TEST=Build Kahlee with Elog. Check mosys eventlog list for timestamps. Change-Id: I4d820fbe11043e7e3153d67159f52274d5f14bae Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-22soc/intel/skylake: Make use of common SMM code for SKLSubrata Banik
This patch ensures skylake soc is using common SMM code from intel common block. TEST=Build and boot soraka/eve Change-Id: I8163dc7e18bb417e8c18a12628988959c128b3df Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/22826 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-22soc/intel/cannonlake: Add SoC API to make use SMM common codeSubrata Banik
Add SoC API to detect any illegal access to write into the BIOS located in the FWH. Change-Id: If526cbae9afee47fa272bdf74e04416aff100e88 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-22soc/intel/common: Add missing SoC common function into SMM librarySubrata Banik
Modify SMM common code in order to accommodate SKL, CNL, APL, GLK SOC code. Change-Id: Ie9f90df3336c1278b73284815b5197400512c1d2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22869 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-21google/fizz: Enable ec sw sync gbb by defaultShelley Chen
firmware test team is requesting that default gbb flags set to 0x39 rather than 0x239 so that it's consistent with the default gbb flags of other platforms. BUG=b:70392534 BRANCH=None TEST=emerge-fizz coreboot chromeos-bootimage gbb_utility --get --flags image-fizz.bin and make sure that it returns 0x39 instead of 0x239 Change-Id: Ib73e4619b13f6b7c2d01598c926fbbd7d7eb9bef Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22962 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-21mainboard/google/fizz: Enable S0ixShelley Chen
Enable S0ix for fizz. BUG=b:67598361 BRANCH=None TEST=None. Need to be tested with EC and kernel as well. Change-Id: I981d2cc7e969a44567b0f21f63f68c78e73f5cb5 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22955 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-21google/kahlee: Select fanless SMU firmwareMarshall Dawson
Don't rely on the cascading default values. Ensure Kahlee uses the fanless versions of the SMU fimware by selecting it. Change-Id: I0761266f2a4026ebc251b64074c10481118734a2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-21pcengines/apu2: add support for apu4 variantPiotr Król
apu4 is new version of PC Engines platform, which contains 4 Ethernet ports and 4GB of RAM. In functional way it is very similar to apu3. Platform tested with booting Linux voyage (kernel 3.16.7) using USB and SeaBIOS as 1st stage and GRUB as 2nd stage bootloader. Also Debian (kernel 4.8.5) using iPXE. Change-Id: Ia7a9971d25d4ecc215c392be1e46dc1c10129ba7 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/22629 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 16:43:06 +0000