| Age | Commit message (Collapse) | Author |
|---|
|
The SMSC SCH5545 is very similar to the publicly available
datasheet for the SCH5627.
TEST=use PS2 keyboard and mouse, serial port, runtime registers and
Embedded Memory Interface on Dell Optiplex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If8a60d5802675f09b08014ed583d2d8afa29fc04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40350
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the device doesn't return a valid component type, that means the
device is non-functional.
The dw_i2c_regs had invalid offsets for the version field. I got the
correct value from the DesignWare DW_apb_i2c Databook v2.02a. It also
matches what the Picasso PPR says.
I also print out the version field of the controller.
BUG=b:153001807
BRANCH=none
TEST=Tested on PSP where I2C is non functional. Also tested on trembyle
and verified i2c was initialized.
Saw the following in the logs
I2C bus 2 version 0x3132322a
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If5527972508e0f4b35cc9ecdb1491b1ce85ff3af
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2144540
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40870
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct comment on HMRFPO_ENABLE flow for CSE Lite SKU. In order to place
CSE into SECOVER_MEI_MSG mode, below procedure has to be followed.
1. Ensure CSE boots from RO(BP1).
- Set CSE's next boot partition to RO
- Issue GLOBAL_RESET HECI command to reset the system
2. Send HMRFPO_ENABLE command to CSE. Further, no reset is required.
TEST=Verified on hatch
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I213e02ba3898194fa6c8fe38fab34b5c19f25aa1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41340
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on Fibocom HW user manual RESET should be deasserted at least 20ms after the power on pin.
The design for the reset pin is open drain connected to a pull up, so it is set to high-Z (configured as GPIO in) after 20ms.
BUG=b:152013143
BRANCH=none
TEST=traced the signals using a scope to verify timing is met.
Signed-off-by: Alex Levin <levinale@chromium.org>
Change-Id: I7c947d1bc4cce1f97383a2f2c254986e182661c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41356
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Power key is a special non-matrixed key. Chrome /powerd
only listens to the keyboard device for this key, so add
its keymap.
BUG=b:155941390
TEST=Test that power key generates KEY_POWER in linux evtest
Change-Id: I570602d9febcb5c17e58761f2004ee88be16c27f
Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Configuring pull for SD-card detect pin.
Without this SD-card detection is not working as expected
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Change-Id: I77bf355a049224784a160defa6bee66d0f9ceb75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Configuring GPIO Pins as I2S mode for Audio speaker.
Change-Id: I681aa6d0d57671b0fd9b7bc88de6f2cc202a7af0
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources in
read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I49ce6ac88c4cb7cd05ff9d78133593ce97304596
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41374
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources in
read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I419be7edf289636b24b9a7d6c390866ade638de3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources in
read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I16f0439679471366723a0084918a20cd95834831
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41372
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves adding of resources to read_resources() instead of
set_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I7d5e4aa0fc28dd35f774957ef303d8854aa07913
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41370
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources
during read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I532f508936d5ec154cbcb3538949316ae4851105
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41369
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). This change fixes the order by adding resources in
read_resources().
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I84c1ba8645b548248a8bb8bf5bc4953d3be12475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Keith Hui <buurin@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The chipset code was incorrectly adding memory resources
to the domain device after resource allocation occurred.
It's not possible to get the correct view of the address space,
and it's generally incorrect to not add resources during
read_resources(). Fix the order by hanging the resources off
of the host bridge device.
Change-Id: I8a7081020be43da055b7de5a56dd97a7b5a9f09c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
GPIO B11 pin should be configured as PMCALERT function. This is
required for the intergrated USB-C feature to work in the SOC
BUG=b:154778458, b:156288164
TEST= build and boot coreboot image on deltan. Test Type-C port
enumeration on Chrome OS
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I8f995901b0a50d2c74f57aba96f86134c9d569e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41378
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables PCIEXP_HOTPLUG to support resource allocation for
TCSS TBT/USB4 ports.
BUG=b:149186922
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I4cb820e83da40434b00198b934453805e35ef1ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change uses cpu_phys_address_size() to calculate the size of high
MMIO region instead of a macro for each SoC. This ensures that the
entire range above TOUUD that can be addressed by the CPU is used for
MMIO above 4G boundary.
Change-Id: I01a1a86c0c65856f9f35185c2f233c58f18f5dfe
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There should be no harm in advertising the MMIO window above 4G in
ACPI tables unconditionally. OS can decide whether or not to use the
window. This change removes the config option enable_above_4GB_mmio
and instead adds the correct MMIO window (above 4G) details to ACPI
tables always.
Change-Id: Ie728f6ee7f396918e61b29ade862b57dac36cb08
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41276
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change sets the base for MMIO above 4G to TOUDD. It matches what
is used by resource allocator if MMIO resources are allocated above 4G
and also matches the expectation in northbridge.asl. This change
also gets rid of the macro ABOVE_4GB_MEM_BASE_ADDRESS since it is now
unused.
BUG=b:149186922
TEST=Verified that kernel does not complain about MMIO windows above
4G.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ibbbfbdad867735a43cf57c256bf206a3f040f383
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41155
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code is based on autoport and that for X230. Major differences are:
- Only one DDR3 slot
- HM77 PCH
- M.2 socket instead of mini pci-e
- no docking
- no tpm
Tested:
- CPU i5-3337U
- Slotted DIMM 8GiB
- Camera
- pci-e and usb2 on M.2 slot with A key for wlan
- sata and usb2 (no superspeed components) on M.2 slot with B key for wwan
- On board SDHCI connected to pci-e
- USB3 ports
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- Sound
- Thinkpad EC
- S3
- Linux 4.9 within Debian GNU/Linux stable, loaded from
Seabios.
Untested:
- Touch screen, which is said to work under ubuntu but not debian.
Change-Id: Ie537645d5ffaee799e79af2f821f80c3ebd2dfec
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds a SPI rom region RW_SPD_CACHE on Puff and it can be used
on spd_cache to reduce reading SPD data from SODIMM by smbus. It's for
saving the boot time and it can be used to trigger MRC retraining when
memory DIMM is changed.
BUG=b:146457985
BRANCH=None
TEST=Build puff successfully and verified below two items.
1. To change memory DIMM can trigger retraining.
2. one DIMM save the boot time : 158ms
two DIMM save the boot time : 265ms
Change-Id: I8d07fddf113a767d62394cb31e33b56f22f74351
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
This patch adds some spd_cache functions. They are for implementing the
spd_cache. It's for reducing the SPD fetch time when device uses SODIMMs.
The MRC cache also includes SPD data, but there is no public header file
available to decode the struct of MRC. So SPD cache is another solution.
BUG=b:146457985
BRANCH=None
TEST=Build puff successfully and verified below two items.
one DIMM save the boot time : 158ms
two DIMM save the boot time : 265ms
Change-Id: Ia48aa022fabf8949960a50597185c9d821399522
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
This patch adds the get_spd_sn function. It's for reading SODIMM serial
number. In spd_cache implementation it can use to get serial number
before reading whole SPD by smbus.
BUG=b:146457985
BRANCH=None
TEST=Wrote sample code to get the serial number and ran on puff.
It can get the serial number correctly.
Change-Id: I406bba7cc56debbd9851d430f069e4fb96ec937c
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40414
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adds SPD_LPDDR4X_556b_1R_32Gb_8GbD_QDP_4267.spd.hex, which will be used
initially for the "H9HKNNNCRMBVAR-NEH" SKhynix part as DRAM ID #0.
Adds SPD_LPDDR4X_556b_1R_64Gb_16GbD_QDP_4267.spd.hex, which will be
used initially for the "MT53E1G64D4SQ-046 WT:A" Micron part as
DRAM ID #1.
BUG=b:155423877
TEST=none
Change-Id: I5580f602cd411e415dafcb36bd1ffa43c4f02f60
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41076
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using following commande:
diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l '
memalign\|malloc\|free' -- src/) |grep -v vendorcode |grep '<'
Change-Id: Ib2ee840a10de5c10d57aa7a75b805ef69dc8da84
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41241
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Add SPD_LPDDR4X_200b_1R_16Gb_16Row_DDP_4267.spd.hex, initially
used for the SKhynix H9HCNNNBKMMLXR-NEE part with DRAM ID #2
- Add SPD_LPDDR4X_200b_2R_64Gb_ODP_4267.spd.hex, initially
used for the SKhynix H9HCNNNFAMMLXR-NEE part with DRAM ID #3
- Add SPD_LPDDR4X_200b_2R_32Gb_QDP_4267.spd.hex, initially
used for the Micron MT53E1G32D2NP-046 WT:A part with DRAM ID #4
BUG=b:147857288
TEST=none
Change-Id: I60d8bb05a4d6d3608adc7de69efc8623d1ca610d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41126
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Unused includes found using following commande:
diff <(git grep -l '#include <stddef.h>' -- src/) <(git grep -l
'size_t\|ssize_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\
|MAYBE_STATIC_NONZERO\|MAYBE_STATIC_BSS\|zeroptr' -- src/)|grep '<'
|grep -v vendor |grep -vF '.h'
Change-Id: Ic54b1db995fe7c61b416fa5e1c4022238e4a6ad5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41150
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
unused includes of <stdin.h> found using following commande:
diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l
'int8_t\|uint8_t\|int16_t\|uint16_t\|int32_t\|uint32_t\|int64_t\|
uint64_t\|intptr_t\|uintptr_t\|intmax_t\|uintmax_t\|s8\|u8\|s16\|
u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|UINT8_MAX\|INT16_MIN\
|INT16_MAX\|UINT16_MAX\|INT32_MIN\|INT32_MAX\|UINT32_MAX\|INT64_MIN\
|INT64_MAX\|UINT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|UINTMAX_MAX' -- src/)
|grep '<' |grep -v vendor |grep -vF '.h'
Change-Id: Icb9b54c6abfb18d1e263665981968a4d7cccabeb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41148
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard specific dock-init mechanism introduced
https://review.coreboot.org/c/coreboot/+/36093 works on most boards,
but https://ticket.coreboot.org/issues/256 shows that some boards
(e.g. x201 and t410) need communication with h8 EC to enable or
disable dock, (in dock_connect() and dock_disconnect() respectively)
so they must be done after the h8 EC is brought up, which is not
garanteed in the above mainboard specific dock-init mechanism.
This time, a hook function h8_mb_init() will be called at the end of
h8_enable(). (in place of the ancient h8_mainboard_init_dock() removed
in CB:36093) Its default implementation is a weak empty function, but
could be overrided with a strong one for boards needing to perform
actions which should be done after h8 EC is brought up.
This should fix the regression detected in
https://ticket.coreboot.org/issues/256
Change-Id: I3674fbfeab2ea2cd2a4453a8e77521157d553388
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This change selects SOC_AMD_COMMON_BLOCK_HAS_ESPI which enables
the capability for using eSPI on Picasso.
Additionally, it also calls espi_setup() and espi_configure_decodes()
if mainboard enables use of eSPI and skips LPC decodes in that case.
BUG=b:153675913,b:154445472
Change-Id: I4876f1bff4305a23e8ccc48a2d0d3b64cdc9703d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change uses lpc_early_init() for enabling and configuring LPC
using the common block LPC driver.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I65784b481ae598bf3a85392ae4fe281aac974097
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41273
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function espi_setup() which allows SoCs to
configure connection to slave. Most of the configuration is dependent
upon mainboard settings in espi_config done as part of the device
tree. The general flow for setup involves the following steps:
1. Set initial configuration (lowest operating frequency and single mode).
2. Perform in-band reset and set initial configuration since the
settings would be lost by the reset.
3. Read slave capabilities.
4. Set slave configuration based on mainboard settings.
5. Perform eSPI host controller configuration to match the slave
configuration and set polarities for VW interrupts.
6. Perform VW channel setup and deassert PLTRST#.
7. Perform peripheral channel setup.
8. Perform OOB channel setup.
9. Perform flash channel setup.
10. Enable subtractive decoding if requested by mainboard.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I872ec09cd92e9bb53f22e38d2773f3491355279e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41272
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Memory SPD files for each variant are now stored in the variant's
mb/google/volteer/variants/<variant_name>/spd directory instead
of storing them in mb/google/volteer/spd.
This change moves SPDs to where they are needed and changes the
makefile to look for them in their new locations.
BUG=b:156126658
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
a proto2 SKU4 to the kernel.
Change-Id: I759c979027477a2a4c5489a6b12278799488d6e7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41184
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To change frequency, the SOC PLL team suggests procedure below:
First, we need to enable the intermediate clock and
switch the ca53 clock source to the intermediate clock.
Second, disable the armpll_ll clock output.
Third, raise armpll_ll frequency and enable the clock output.
The last, switch the ca53 clock source back to armpll_ll and
disable the intermediate clock.
BUG=b:154451241
BRANCH=jacuzzi
TEST=Boots correctly on Jacuzzi.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: Ib9556ba340da272fb62588f45851c93373cfa919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41077
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates espi_debug.c to use switch case instead of if-else
for operating frequency and i/o mode prints. This is done to address
the review comments received on CB:41254.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I4f323b79f030818e2daa983d4f17ddf7a3192171
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41346
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CB:41194 got rid of "this file is part of" lines. However, there are
some changes that landed right around the same time including those
lines. This change uses the following command to drop the lines from
new files:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ic3c1d717416f6b7e946f84748e2b260552c06a1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41342
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Immediately following FSP-S, update the data fabric routing
registers to make the region between HPET and LAPIC as non-posted.
If AGESA is modified to do this, we can delete data_fabric_util.c. If
AGESA is modified to not program the registers, then we can simplify
data_fabric_set_mmio_np().
BUG=b:147042464, b:156296146
TEST=boot trembyle
Change-Id: Idbafaac158f5a4c533d2d88db79bb4d6244e5355
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41268
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The device ids are already defined in include/device/pci_ids.h as
PCI_DEVICE_ID_AMD_FAM17H_DF*.
BUG=b:147042464
TEST=Build trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic68a1067e5976af972592d7352c40a5c66dbeb8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These are used to setup the data fabric.
Definitions came from 55570-B1 Rev 3.14 - PPR for AMD Family 17h Model 18h
BUG=b:147042464
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib51f6e2fd304da9948d6625608af71f25b974854
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41266
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Family 17h devices are designed with a new internal architecture,
frequently referred to as the data fabric. Although designed to
behave somewhat like the older integrated northbridge designs,
the D18Fx definitions are completely new.
The previous northbridge.c was copied from stoneyridge which is
completely different.
Change-Id: Id70cbda99657249179fb8cf5e461dd6a37ec9153
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41265
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are not northbridge functions.
BUG=b:147042464
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia9e7d4c7554788a9fdbfdb90e6ead60060cc4c30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41264
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a device specific register, not a northbridge register.
BUG=b:147042464
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I97b63571e336f541dcb274e4c8c608f6fc59ff42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41263
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move this with the other acpi functions.
BUG=b:147042464
TEST=build trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I24bd5c7d7c90968759ac745012e7bbc47f0ef6a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41262
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:147042464
TEST=Build trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5df618f69a7dcca47b9733efb3699b37fd171e90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41261
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables the keyboard backlight feature in ACPI for volteer.
BUG=b:156326050
TEST=Verified 'KBLT' shows up in the DSDT ACPI table.
Change-Id: Id1b1bb059368b0cc36cb06e6cdb8b989060a1dde
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41281
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Modify ELAN EKTH6918 USI touchscreen slave address to 0x10.
BUG=b:152936745
TEST="emerge-dedede coreboot chromeos-bootimage", build successful.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I999967b0f37c82ff7811e3b6117baab795a11195
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
When any USB image disk is connected to the DUT through
HUAWEI/APPLE Dongle, press Ctrl + u on the dev screen,
it cannot boot from USB.
We found the SS hub cannot be enumerated. So disable xHCI
compliance mode.
BRANCH=octopus
BUG=b:155347573
TEST=Confirm successful boot from USB
Change-Id: Iea4a3df156da0627336f7d6c1e03837b6cf0e7f2
Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40905
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
fch_spi_ctrl.c uses read*()/write*() functions which are declared in
arch/mmio.h. This change includes the file arch/mmio.h in
fch_spi_ctrl.c.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I6540004512af1f59f5fb300a3a4818b87ad94bfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change adds a helper function lpc_early_init() which does the
following things:
1. Enables LPC controller
2. Disables any LPC decodes (These can be set up later by SoC or
mainboard as required).
3. Sets SPI base so that MMIO base for SPI and eSPI controllers is
initialized.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I016f29339466c3fee92fe9b62a13d72297c29b8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Picasso has an LPC and eSPI bridge on the same PCI DEVFN. They can both
be active at the same time. This adds a way to specify which devices
belong on which bus.
i.e.,
device pci 14.3 on # - D14F3 bridge
device espi 0 on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end
device lpc 0 on
end
end
BUG=b:154445472
TEST=Built trembyle and saw static.c contained the espi bus.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0c2f40813c05680f72e5f30cbb13617e8f994841
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The default setting of the root port ASPM configuration can be
overridden from the device tree by using a non zero value.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I85c545d5eacb10f43b94228f1caf1163028645e0
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Current Interrupt setting use 2nd parameters as device function number.
- Correct as interrupt pin number according to _PRT package format.
{Address, pin, Source, Source index}
- Use irq number directly rather than irq definition as its number
is not for PCI device.
The issue found while enabling GBE and GBE interrupt is not working
without this change.
Reference
- ACPI spec 6.2.13 _PRT
- FSP reference code:
https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/
ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/
PeiItssPolicyLibVer2.c
- BIOS reference code:
https://github.com/otcshare/CCG-TGL-Generic-Full/blob/master/
TigerLakeBoardPkg/Acpi/AcpiTables/Dsdt/PciTree.asl
TEST=boot to OS with GBE enabled and check GBE interrupt
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I8084b30c668c155ebabbee90b5f70054813b328e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41153
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add functionality to use process call cycle. It can be used to
write/read data to/from e.g. EEPROM attached to SMBus Controller
via I2C.
Tested on:
* C246
Change-Id: Ifdac6cf70a4ce744601f5d152a83d2125ea88360
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39875
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
pci_domain_set_resources is duplicated in all the SOCs. This change
promotes the duplicated function.
Picasso was adding it again in the northbridge patch. I decided to
promote the function instead of duplicating it.
BUG=b:147042464
TEST=Build and boot trembyle.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
IedSize and EnableC6Dram are removed in JSL FSP v2114 so
remove them from 'fsp_params.c'.
BUG=155054804
BRANCH=None
TEST=Build and boot JSLRVP
Change-Id: I47bd3f87bdb59625098c0d734695f02d738f8bbd
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41239
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch control SATA related UPDs based on the devicetree
configuration as per each board's requirement.
BUG=b:155595624
BRANCH=None
TEST=Build, boot JSLRVP, Verified UPD values from FSP log
Change-Id: I4f7e7508b8cd483508293ee3e7b760574d8f025f
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
SataEnable UPD override will be filled using devicetree pci device
status check.
Change-Id: I957dfcf139acd4f4dd5723bc1b010ec45ec91651
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41227
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates lpc_enable_children_resources() to configure IO
and MMIO resources differently depending upon whether the mainboard
wants to setup decode windows for LPC or eSPI.
BUG=b:154445472,b:153675913
Change-Id: Ie8803e934f39388aeb6e3cbd7157664cb357ab23
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change provides a helper function espi_update_static_bar() that
informs the eSPI common driver about the static BAR to use for eSPI
controller instead of reading the SPIBASE. This is required to support
the case of verstage running on PSP.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1f11bb2e29ea0acd71ba6984e42573cfe914e5d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
FSP provides the UPD's for SATA and DMI power optimization.
In this patch we are adding the soc's config support to set
those power optimization bits in FSP. By default those
optimizations are enabled. To disable those we need to set
the DmiPwrOptimizeDisable and SataPwrOptimizeDisable to 1
in devicetree.
BUG=b:151162424
BRANCH=None
TEST=Build and boot volteer and TGL RVP.
Change-Id: Iefc5e7e48d69dccae43dc595dff2f824e53f5749
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change adds the following helper functions for eSPI decode:
1. espi_open_io_window() - Open generic IO window decoded by eSPI
2. espi_open_mmio_window() - Open generic MMIO window decoded by eSPI
3. espi_configure_decodes() - Configures standard and generic I/O
windows using the espi configuration provided by mainboard in device tree.
BUG=b:153675913,b:154445472
Change-Id: Idb49ef0477280eb46ecad65131d4cd7357618941
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41073
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds eSPI register definitions for I/O and MMIO decode
using eSPI on AMD SoCs. Additionally, it also adds a macro to define
the offset of ESPI MMIO base from SPI MMIO base.
BUG=b:153675913
Change-Id: Ifb70ae0c63cc823334a1d851faf4dda6d1c1fc1a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds a Kconfig option to enable eSPI debugging that pulls
in a helper function to print slave capabilities.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I8ff250fe85dfa9370bf93ce3c7e2de5c069bf9e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds helper functions that can be used to check support
for different slave capabilities.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ic66b06f9efcafd0eda4c6029fa67489de76bbed4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This change adds eSPI VW index message definitions as per per Enhanced
Serial Peripheral Interface Base Specification (document #
327432-004 Revision 1.0) Chapter 5 "Transaction Layer".
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I5c04d4de222e16d3b8e2a5fb2fc4107ea278a35b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41252
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds eSPI slave register definitions as per Enhanced
Serial Peripheral Interface Base Specification (document #
327432-004 Revision 1.0) Chapter 7 "Slave Registers".
BUG=b:153675913
Change-Id: Icee53817476b7d50ff26e64bbc2c3f5afb19a7cd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
decodes
This change sets LPC_IO_PORT_DECODE_ENABLE to 0 as part of
lpc_disable_decodes() to ensure that the I/O port decodes are also disabled.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1474f561997f2ee1231bd0fcaab4d4d4e98ff923
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change switches to using the common block SPI driver for
performing early SPI initialization and for re-configuring SPI speed
and mode after FSP-S has run.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia3186ce59b66c2f44522a94fa52659b4942649b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change adds support for using common SoC configuration by adding
soc_amd_common_config to soc_amd_picasso_config and helper function to
return pointer to the structure to amd common block code.
Change-Id: I8bd4eac3b19c9ded2d9a3e95ac077f014730f9d1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds support for following SPI configuration functions to
common block SPI driver and exposes them to be used by SoC:
1. fch_spi_early_init(): Sets up SPI ROM base, enables SPI ROM,
enables prefetching, disables 4dw burst mode and sets SPI speed and mode.
2. fch_spi_config_modes(): This allows SoC to configure SPI speed and
mode. It uses SPI settings from soc_amd_common_config to configure the
speed and mode.
These functions expect SoC to include soc_amd_common_config in SoC
chip config and mainboard to configure these settings in device tree.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia4f231bab69e8450005dd6abe7a8e014d5eb7261
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41248
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a Kconfig option to request allocation of prefetch
memory for hotplug devices above the 4G boundary. In order to
select this option by default and still allow users to disable this if
required, another option is added to request allocation of prefetch
memory below 4G boundary which defaults to n but can be overriden
by mainboards.
Without this change, if the number of pciexp bridges supporting
hot-plug is more than 4 or if the reserved prefetch memory size for
hot-plug cases was increased, then the resource allocator would fail
to satisfy the resource requirement below 4G boundary.
BUG=b:149186922
TEST=Enabled resource allocation above 4G for prefetch memory on volteer
and verified that it gets allocated above 4G boundary.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I061d935eef9fcda352230b03b5cf14e467924e50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39489
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates the resource limit for PCI domain to allow
resource allocation above 4G boundary. The resource limit is set to
the highest physical address for the CPU.
BUG=b:149186922
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Idfcc9a390d309886ee2b7880b29502c740e6578e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39488
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for allocating resources above the 4G
boundary by making use of memranges for resource windows enabled in
the previous CL.
It adds a new resource flag IORESOURCE_ABOVE_4G which is used in the
following ways:
a) Downstream device resources can set this flag to indicate that they
would like to have their resource allocation above the 4G
boundary. These semantics will have to be enabled in the drivers
managing the devices. It can also be extended to be enabled via
devicetree. This flag is automatically propagated by the resource
allocator from downstream devices to the upstream bridges in pass
1. It is done to ensure that the resource allocator has a global view
of downstream requirements during pass 2 at domain level.
b) Bridges have a single resource window for each of mem and prefmem
resource types. Thus, if any downstream resource of the bridge
requests allocation above 4G boundary, all the other downstream
resources of the same type under the bridge will be allocated above 4G
boundary.
c) During pass 2, resource allocator at domain level splits
IORESOURCE_MEM into two different memory ranges -- one for the window
below 4G and other above 4G. Resource allocation happens separately
for each of these windows.
d) At the bridge level, there is no extra logic required since the
resource will live entirely above or below the 4G boundary. Hence, all
downstream devices of any bridge will fall within the window allocated
to the bridge resource. To handle this case separately from that of
domain, initializing of memranges for a bridge is done differently
than the domain.
Limitation:
Resources of a given type at the bridge or downstream devices
cannot live both above and below 4G boundary. Thus, if a bridge has
some downstream resources requesting allocation for a given type above
4G boundary and other resources of the same type requesting allocation
below 4G boundary, then all these resources of the same type get
allocated above 4G boundary.
BUG=b:149186922
TEST=Verified that resources get allocated above the 4G boundary
correctly on volteer.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I7fb2a75cc280a307300d29ddabaebfc49175548f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change updates the resource allocator in coreboot to allow using
multiple ranges for resource allocation rather than restricting
available window to a single base/limit pair. This is done in
preparation to allow 64-bit resource allocation.
Following changes are made as part of this:
a) Resource allocator still makes 2 passes at the entire tree. The
first pass is to gather the resource requirements of each device
under each domain. It walks recursively in DFS fashion to gather the
requirements of the leaf devices and propagates this back up to the
downstream bridges of the domain. Domain is special in the sense that
it has fixed resource ranges. Hence, the resource requirements from
the downstream devices have no effect on the domain resource
windows. This results in domain resource limits being unmodified after
the first pass.
b) Once the requirements for all the devices under the domain are
gathered, resource allocator walks a second time to allocate resources
to downstream devices as per the requirements. Here, instead of
maintaining a single window for allocating resources, it creates a
list of memranges starting with the resource window at domain and then
applying constraints to create holes for any fixed resources. This
ensures that there is no overlap with fixed resources under the
domain.
c) Domain does not differentiate between mem and prefmem. Since they
are allocated space from the same resource window at the domain level,
it considers all resource requests from downstream devices of the
domain independent of the prefetch type.
d) Once resource allocation is done at the domain level, resource
allocator walks down the downstream bridges and continues the same
process until it reaches the leaves. Bridges have separate windows for
mem and prefmem. Hence, unlike domain, the resource allocator at
bridge level ensures that downstream requirements are satisfied by
taking prefetch type into consideration.
e) This whole 2-pass process is performed for every domain in the
system under the assumption that domains do not have overlapping
address spaces.
Noticeable differences from previous resource allocator:
a) Changes in print logs observed due to flows being slightly
different.
b) Base, limit and size of domain resources are no longer updated
based on downstream requirements.
c) Memranges are used instead of a single base/limit pair for
determining resource allocation.
d) Previously, if a resource request did not fit in the available
base/limit window, then the resource would be allocated over DRAM or
any other address space defeating the principle of "no overlap". With
this change, any time a resource cannot fit in the available ranges,
it complains and ensures that the resource is effectively disabled by
setting base same as the limit.
e) Resource allocator no longer looks at multiple links to determine
the right bus for a resource. None of the current boards have multiple
buses under any downstream device of the domain. The only device with
multiple links seems to be the cpu cluster device for some AMD
platforms.
BUG=b:149186922
TEST=Verified that resource allocation looks correct based on
addresses assigned on Volteer.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia1f089877c62e119c6a994a10809c9cc0050ec9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39486
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We should not need that.
Change-Id: Ic0181a300670ed7ee999dafedac79f3f89bfbee9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michael Niewöhner
|
|
This reverts commit cc805d9dd64ca2d3c8de2b2de2ea7c53b387ff8f.
Advertising certain Windows versions triggers different paths in
the OS. As there may also be device specific quirks in the OS, such
changes need to be tested thoroughly on all affected devices.
There was at least one very subtle regression introduced by this.
When Linux sees "Windows 2012" support advertised, it disables the
`acpi_video` backlight controls, at least on devices with Intel IGD.
Without user-space handling the ACPI events, keyboard backlight
controls stop working.
Moreover, the commit message didn't state any reason for this change.
Why was it merged?
Change-Id: I722075f8e8f836b039fb8b8277e665fb49dac8f4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit b3100775ae29caebd068db8f6209561abda2fb0c.
This was part of a series that moved things to common code and causes
regressions.
Change-Id: I239906e498c8352e6880408744f176a8aeb13dc8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
All boards using this northbridge now enable serial in bootblock,
so this is no longer needed.
Change-Id: I6baf2de81870dbba2a7f1abb3f1fdd6716d64511
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41048
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change splits lpc_set_spibase() into two separate functions:
lpc_set_spibase() - Sets MMIO base address for SPI controller and eSPI
controller (if supported by platforms)
lpc_enable_spi_rom() - Enables SPI ROM
This split is done to allow setting of MMIO base independent of ROM
enable bits. On platforms like Picasso, eSPI base is determined by the
same register and hence eSPI can set the BAR without having to touch
the enable bits.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3f270ba1745b4bb8a403f00cd069a02e21d444be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change adds support for struct soc_amd_common_config that allows
multiple AMD SoCs to share common configuration. This can then be used
by common/block drivers to get the required configuration from device
tree. It also provides function declaration for
soc_get_common_config() that needs to be provided by SoCs making use
of the common configuration structure.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Idb0d797525414c99894a8e4ede65469381db7794
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41246
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We only write to the IOSAV LFSR registers twice, but we do so between
the writes to the other four IOSAV per-subsequence registers. Since we
know that the IOSAV is sleeping when we program the subsequences, we
might as well do the two oddball LFSR register writes after we have
programmed the always-written-to group of four registers. That way,
subsequent changes can reproducibly replace the four writes with a
single macro.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: If7bb14a9862a53a3eba565d17401347dcc9ffbe9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40973
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reorder the order of the operands in three register writes, so that
replacing them with macros in a follow-up does not change the binary.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I44aee9c0f49770586de322ee7f44c3609dbadd0b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40972
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements the pin changes needed for Trogdor rev1.
Unfortunately, coreboot has to get the EC and TPM SPI busses compiled
into Kconfig, so we cannot really build a single image that runs on both
revisions. Introduce a Kconfig to handle this instead.
Change-Id: I2e48dc4565682c12089b6cf92c29f4cef4d61bb8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support to configure the Silver and L3 PLLs and switch the APSS
GFMUX to use the PLL to speed up the boot cores.
Tested: CPU speed frequency validated for speed bump
Change-Id: Iafd3b618fb72e0e8cc8dd297e4a3e16b83550883
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Update memory regions, etc.
Change-Id: If852fe4465fb431809570be6cdccff3ad9d9f4f0
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39362
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I63f35c94bc6c60934ace5fe0fd9176443059b354
Signed-off-by: Ashwin Kumar <ashk@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36518
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Required for TPM IRQ.
Change-Id: I8198213cf2808be5291620892185b1e534263e3f
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38714
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8ff5dd63fac28ffa558aec71e79a6de87d7885e0
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37306
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Transfer sequence used by SPI-Flash application present in CB/DC.
1. Assert CS through GPIO
2. Data transfer through QSPI (involves construction of command
descriptor for multiple read/write transfers)
3. De-assert CS through GPIO.
With above sequence, in DMA mode we dont have the support for read
transfers that are not preceded by write transfer in QSPI controller.
Ex: "write read read read" sequence results in hang during DMA transfer,
where as "write read write read" sequence has no issue.
As we have application controlling CS through GPIO, we are making
fragment bit "set" for all transfers, which keeps CS in asserted
state although the ideal way to operate CS is through QSPI controller.
Change-Id: Ia45ab793ad05861b88e99a320b1ee9f10707def7
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39807
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves all the logic for setting up decode windows for LPC
under configure_child_lpc_windows() which is called from
lpc_enable_children_resources(). This is in preparation to configure
decode windows for eSPI differently if mainboard decides to use eSPI
instead of LPC.
Side-effect of this change is that the IO decode registers are written
after each child device resources are considered.
BUG=b:154445472
Change-Id: Ib8275bc4ce51cd8afd390901ac723ce71c7a9148
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41070
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
eSPI on Picasso is configured using the LPC bridge configuration
registers. This change enables config options to allow SoC to select
if it supports eSPI (SOC_AMD_COMMON_BLOCK_HAS_ESPI) and mainboard to
select if it wants to use eSPI instead of LPC for talking to legacy
devices and embedded controllers (SOC_AMD_COMMON_BLOCK_USE_ESPI).
BUG=b:154445472
Change-Id: I15e9eb25706e09393c019eea4d61b66f17490be6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41069
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove license boiler plate in favor of SPDX headers. Where there's
valuable additional information, fix up formatting.
Change-Id: I801f27bd1a2b9defd5672a52c3a06eb1a12a9302
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41207
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia3de79c7d71049da00ed108829eac6cb49ff3ed6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41205
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add an SSDT generator for Maxim 98390 kernel driver.
Copied from 'drivers/i2c/rt1011'.
BUG=b:149443429
BRANCH=None
TEST=built coreboot and checked audio function with kernel patch on nightfury
Change-Id: I64d776c6c9726eb5822ad4dd82f6826c2a30cb1d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39463
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commands used:
perl -i -p0e 's|\/\*[*\s]*Permission[*\s]*to[*\s]*use,[*\s]*copy,[*\s]*modify,[*\s]*and.or[*\s]*distribute[*\s]*this[*\s]*software[*\s]*for[*\s]*any[*\s]*purpose[*\s]*with[*\s]*or[*\s]*without[*\s]*fee[*\s]*is[*\s]*hereby[*\s]*granted,[*\s]*provided[*\s]*that[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice[*\s]*and[*\s]*this[*\s]*permission[*\s]*notice[*\s]*appear[*\s]*in[*\s]*all[*\s]*copies.[*\s]*THE[*\s]*SOFTWARE[*\s]*IS[*\s]*PROVIDED[*\s]*.*AS[*\s]*IS.*[*\s]*AND[*\s]*THE[*\s]*AUTHOR[*\s]*DISCLAIMS[*\s]*ALL[*\s]*WARRANTIES[*\s]*WITH[*\s]*REGARD[*\s]*TO[*\s]*THIS[*\s]*SOFTWARE[*\s]*INCLUDING[*\s]*ALL[*\s]*IMPLIED[*\s]*WARRANTIES[*\s]*OF[*\s]*MERCHANTABILITY[*\s]*AND[*\s]*FITNESS.[*\s]*IN[*\s]*NO[*\s]*EVENT[*\s]*SHALL[*\s]*THE[*\s]*AUTHOR[*\s]*BE[*\s]*LIABLE[*\s]*FOR[*\s]*ANY[*\s]*SPECIAL,[*\s]*DIRECT,[*\s]*INDIRECT,[*\s]*OR[*\s]*CONSEQUENTIAL[*\s]*DAMAGES[*\s]*OR[*\s]*ANY[*\s]*DAMAGES[*\s]*WHATSOEVER[*\s]*RESULTING[*\s]*FROM[*\s]*LOSS[*\s]*OF[*\s]*USE,[*\s]*DATA[*\s]*OR[*\s]*PROFITS,[*\s]*WHETHER[*\s]*IN[*\s]*AN[*\s]*ACTION[*\s]*OF[*\s]*CONTRACT,[*\s]*NEGLIGENCE[*\s]*OR[*\s]*OTHER[*\s]*TORTIOUS[*\s]*ACTION,[*\s]*ARISING[*\s]*OUT[*\s]*OF[*\s]*OR[*\s]*IN[*\s]*CONNECTION[*\s]*WITH[*\s]*THE[*\s]*USE[*\s]*OR[*\s]*PERFORMANCE[*\s]*OF[*\s]*THIS[*\s]*SOFTWARE.[*\s]*\*\/|/* SPDX-License-Identifier: ISC */|s' $(cat filelist)
perl -i -p0e 's|(\#\#*)\s*Permission[\#\s]*to[\#\s]*use,[\#\s]*copy,[\#\s]*modify,[\#\s]*and.or[\#\s]*distribute[\#\s]*this[\#\s]*software[\#\s]*for[\#\s]*any[\#\s]*purpose[\#\s]*with[\#\s]*or[\#\s]*without[\#\s]*fee[\#\s]*is[\#\s]*hereby[\#\s]*granted,[\#\s]*provided[\#\s]*that[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice[\#\s]*and[\#\s]*this[\#\s]*permission[\#\s]*notice[\#\s]*appear[\#\s]*in[\#\s]*all[\#\s]*copies.[\#\s]*THE[\#\s]*SOFTWARE[\#\s]*IS[\#\s]*PROVIDED[\#\s]*.*AS[\#\s]*IS.*[\#\s]*AND[\#\s]*THE[\#\s]*AUTHOR[\#\s]*DISCLAIMS[\#\s]*ALL[\#\s]*WARRANTIES[\#\s]*WITH[\#\s]*REGARD[\#\s]*TO[\#\s]*THIS[\#\s]*SOFTWARE[\#\s]*INCLUDING[\#\s]*ALL[\#\s]*IMPLIED[\#\s]*WARRANTIES[\#\s]*OF[\#\s]*MERCHANTABILITY[\#\s]*AND[\#\s]*FITNESS.[\#\s]*IN[\#\s]*NO[\#\s]*EVENT[\#\s]*SHALL[\#\s]*THE[\#\s]*AUTHOR[\#\s]*BE[\#\s]*LIABLE[\#\s]*FOR[\#\s]*ANY[\#\s]*SPECIAL,[\#\s]*DIRECT,[\#\s]*INDIRECT,[\#\s]*OR[\#\s]*CONSEQUENTIAL[\#\s]*DAMAGES[\#\s]*OR[\#\s]*ANY[\#\s]*DAMAGES[\#\s]*WHATSOEVER[\#\s]*RESULTING[\#\s]*FROM[\#\s]*LOSS[\#\s]*OF[\#\s]*USE,[\#\s]*DATA[\#\s]*OR[\#\s]*PROFITS,[\#\s]*WHETHER[\#\s]*IN[\#\s]*AN[\#\s]*ACTION[\#\s]*OF[\#\s]*CONTRACT,[\#\s]*NEGLIGENCE[\#\s]*OR[\#\s]*OTHER[\#\s]*TORTIOUS[\#\s]*ACTION,[\#\s]*ARISING[\#\s]*OUT[\#\s]*OF[\#\s]*OR[\#\s]*IN[\#\s]*CONNECTION[\#\s]*WITH[\#\s]*THE[\#\s]*USE[\#\s]*OR[\#\s]*PERFORMANCE[\#\s]*OF[\#\s]*THIS[\#\s]*SOFTWARE.\s(\#* *\n)*|\1 SPDX-License-Identifier: ISC\n\n|s' $(cat filelist)
perl -i -p0e 's|\/\*[*\s]*Redistribution[*\s]*and[*\s]*use[*\s]*in[*\s]*source[*\s]*and[*\s]*binary[*\s]*forms,[*\s]*with[*\s]*or[*\s]*without[*\s]*modification,[*\s]*are[*\s]*permitted[*\s]*provided[*\s]*that[*\s]*the[*\s]*following[*\s]*conditions[*\s]*are[*\s]*met:[*\s]*[1. ]*Redistributions[*\s]*of[*\s]*source[*\s]*code[*\s]*must[*\s]*retain[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice,[*\s]*this[*\s]*list[*\s]*of[*\s]*conditions[*\s]*and[*\s]*the[*\s]*following[*\s]*disclaimer.[*\s]*[*\s]*[2. ]*Redistributions[*\s]*in[*\s]*binary[*\s]*form[*\s]*must[*\s]*reproduce[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice,[*\s]*this[*\s]*list[*\s]*of[*\s]*conditions[*\s]*and[*\s]*the[*\s]*following[*\s]*disclaimer[*\s]*in[*\s]*the[*\s]*documentation[*\s]*and.or[*\s]*other[*\s]*materials[*\s]*provided[*\s]*with[*\s]*the[*\s]*distribution.[*\s]*[3. ]*.*used[*\s]*to[*\s]*endorse[*\s]*or[*\s]*promote[*\s]*products[*\s]*derived[*\s]*from[*\s]*this[*\s]*software[*\s]*without[*\s]*specific[*\s]*prior[*\s]*written[*\s]*permission.[*\s]*THIS[*\s]*SOFTWARE[*\s]*IS[*\s]*PROVIDED.*AS[*\s]*IS.*[*\s]*AND[*\s]*ANY[*\s]*EXPRESS[*\s]*OR[*\s]*IMPLIED[*\s]*WARRANTIES,[*\s]*INCLUDING,[*\s]*BUT[*\s]*NOT[*\s]*LIMITED[*\s]*TO,[*\s]*THE[*\s]*IMPLIED[*\s]*WARRANTIES[*\s]*OF[*\s]*MERCHANTABILITY.*FITNESS[*\s]*FOR[*\s]*A[*\s]*PARTICULAR[*\s]*PURPOSE.*ARE[*\s]*DISCLAIMED.[*\s]*IN[*\s]*NO[*\s]*EVENT[*\s]*SHALL.*LIABLE[*\s]*FOR[*\s]*ANY[*\s]*DIRECT,[*\s]*INDIRECT,[*\s]*INCIDENTAL,[*\s]*SPECIAL,[*\s]*EXEMPLARY,[*\s]*OR[*\s]*CONSEQUENTIAL[*\s]*DAMAGES[*\s]*.INCLUDING,[*\s]*BUT[*\s]*NOT[*\s]*LIMITED[*\s]*TO,[*\s]*PROCUREMENT[*\s]*OF[*\s]*SUBSTITUTE[*\s]*GOODS[*\s]*OR[*\s]*SERVICES;[*\s]*LOSS[*\s]*OF[*\s]*USE,[*\s]*DATA,[*\s]*OR[*\s]*PROFITS;[*\s]*OR[*\s]*BUSINESS[*\s]*INTERRUPTION.[*\s]*HOWEVER[*\s]*CAUSED[*\s]*AND[*\s]*ON[*\s]*ANY[*\s]*THEORY[*\s]*OF[*\s]*LIABILITY,[*\s]*WHETHER[*\s]*IN[*\s]*CONTRACT,[*\s]*STRICT[*\s]*LIABILITY,[*\s]*OR[*\s]*TORT[*\s]*.INCLUDING[*\s]*NEGLIGENCE[*\s]*OR[*\s]*OTHERWISE.[*\s]*ARISING[*\s]*IN[*\s]*ANY[*\s]*WAY[*\s]*OUT[*\s]*OF[*\s]*THE[*\s]*USE[*\s]*OF[*\s]*THIS[*\s]*SOFTWARE,[*\s]*EVEN[*\s]*IF[*\s]*ADVISED[*\s]*OF[*\s]*THE[*\s]*POSSIBILITY[*\s]*OF[*\s]*SUCH[*\s]*DAMAGE.[*\s]*\*\/|/* SPDX-License-Identifier: BSD-3-Clause */|s' $(cat filelist) $1
perl -i -p0e 's|(\#\#*) *Redistribution[\#\s]*and[\#\s]*use[\#\s]*in[\#\s]*source[\#\s]*and[\#\s]*binary[\#\s]*forms,[\#\s]*with[\#\s]*or[\#\s]*without[\#\s]*modification,[\#\s]*are[\#\s]*permitted[\#\s]*provided[\#\s]*that[\#\s]*the[\#\s]*following[\#\s]*conditions[\#\s]*are[\#\s]*met:[\#\s]*[*1. ]*Redistributions[\#\s]*of[\#\s]*source[\#\s]*code[\#\s]*must[\#\s]*retain[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice,[\#\s]*this[\#\s]*list[\#\s]*of[\#\s]*conditions[\#\s]*and[\#\s]*the[\#\s]*following[\#\s]*disclaimer.[\#\s]*[*2. ]*Redistributions[\#\s]*in[\#\s]*binary[\#\s]*form[\#\s]*must[\#\s]*reproduce[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice,[\#\s]*this[\#\s]*list[\#\s]*of[\#\s]*conditions[\#\s]*and[\#\s]*the[\#\s]*following[\#\s]*disclaimer[\#\s]*in[\#\s]*the[\#\s]*documentation[\#\s]*and.or[\#\s]*other[\#\s]*materials[\#\s]*provided[\#\s]*with[\#\s]*the[\#\s]*distribution.[\#\s]*[\#\s]*[*3. ]*.*used[\#\s]*to[\#\s]*endorse[\#\s]*or[\#\s]*promote[\#\s]*products[\#\s]*derived[\#\s]*from[\#\s]*this[\#\s]*software[\#\s]*without[\#\s]*specific[\#\s]*prior[\#\s]*written[\#\s]*permission.[\#\s]*THIS[\#\s]*SOFTWARE[\#\s]*IS[\#\s]*PROVIDED.*AS[\#\s]*IS.*[\#\s]*AND[\#\s]*ANY[\#\s]*EXPRESS[\#\s]*OR[\#\s]*IMPLIED[\#\s]*WARRANTIES,[\#\s]*INCLUDING,[\#\s]*BUT[\#\s]*NOT[\#\s]*LIMITED[\#\s]*TO,[\#\s]*THE[\#\s]*IMPLIED[\#\s]*WARRANTIES[\#\s]*OF[\#\s]*MERCHANTABILITY.*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.*ARE[\#\s]*DISCLAIMED.[\#\s]*IN[\#\s]*NO[\#\s]*EVENT[\#\s]*SHALL.*LIABLE[\#\s]*FOR[\#\s]*ANY[\#\s]*DIRECT,[\#\s]*INDIRECT,[\#\s]*INCIDENTAL,[\#\s]*SPECIAL,[\#\s]*EXEMPLARY,[\#\s]*OR[\#\s]*CONSEQUENTIAL[\#\s]*DAMAGES[\#\s]*.INCLUDING,[\#\s]*BUT[\#\s]*NOT[\#\s]*LIMITED[\#\s]*TO,[\#\s]*PROCUREMENT[\#\s]*OF[\#\s]*SUBSTITUTE[\#\s]*GOODS[\#\s]*OR[\#\s]*SERVICES;[\#\s]*LOSS[\#\s]*OF[\#\s]*USE,[\#\s]*DATA,[\#\s]*OR[\#\s]*PROFITS;[\#\s]*OR[\#\s]*BUSINESS[\#\s]*INTERRUPTION.[\#\s]*HOWEVER[\#\s]*CAUSED[\#\s]*AND[\#\s]*ON[\#\s]*ANY[\#\s]*THEORY[\#\s]*OF[\#\s]*LIABILITY,[\#\s]*WHETHER[\#\s]*IN[\#\s]*CONTRACT,[\#\s]*STRICT[\#\s]*LIABILITY,[\#\s]*OR[\#\s]*TORT[\#\s]*.INCLUDING[\#\s]*NEGLIGENCE[\#\s]*OR[\#\s]*OTHERWISE.[\#\s]*ARISING[\#\s]*IN[\#\s]*ANY[\#\s]*WAY[\#\s]*OUT[\#\s]*OF[\#\s]*THE[\#\s]*USE[\#\s]*OF[\#\s]*THIS[\#\s]*SOFTWARE,[\#\s]*EVEN[\#\s]*IF[\#\s]*ADVISED[\#\s]*OF[\#\s]*THE[\#\s]*POSSIBILITY[\#\s]*OF[\#\s]*SUCH[\#\s]*DAMAGE.\s(\#* *\n)*|\1 SPDX-License-Identifier: BSD-3-Clause\n\n|s' $(cat filelist)
Change-Id: I7ff9c503a2efe1017a4666baf0b1a758a04f5634
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Copyright notices are best stored in AUTHORS
Change-Id: Ib9025c58987ee2f7db600e038f5d3e4edc69aacc
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41203
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fold this last ASUS 440BX board into the P2B family, while bringing in
some changes:
- Devicetree becomes overridetree.
- Remove non-existent IR device and disable ACPI device on Super I/O to
match OEM firmware.
- Add SB GPO settings from OEM firmware to devicetree. This disables
the SPD enabling magic this board needs. By moving the enabling part
to bootblock the hacky enable_spd hook can be eliminated.
- Initialize the serial port in bootblock, like the other boards.
Boot tested on hardware.
Change-Id: I65f2cb9d1bd4c82550de43889e3502526a46bd18
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41047
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 73b723d [google/cyan: Switch Touchpad and Touchscreen...]
in additon to changing the touchpad/touchscreen interrupts from
edge to level triggered, also marked them as maskable.
This was partially reverted in a86bbea0 [google/cyan: set
touchscreen GPIO to non_maskable], but did not resolve all of the
issues. Additionally, 73b723d also accidentally changed the pad
interrupt select from L3 to L1 for all touchscreen GPIOs.
Clean up this mess by setting all touchpad/touchscreen GPIOs
back to maskable, and set the pad level to L3 for all touchscreen
GPIOs.
Tested on several cyan variants
Change-Id: I70e8e2d4ff317c3b9b4108ed6c5bc80e9b0bbc75
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add setting of the MaxPayload for each root port from the device tree.
By default MaxPayload is set to 128 bytes. This change allows changing
to 256 bytes.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: I61e1d619588a7084d52bbe101acd757cc7293cac
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
