| Age | Commit message (Collapse) | Author |
|---|
|
Since SPI controller opcode registers are locked by FSP, they need to be
initialized to a known good state before ReadyToBoot event and after
every SPI flash access (e.g. for MRC cache) has been finished in order
to enable the OS to use SPI controller without constraints.
Change-Id: I0a66344cd44e036c3999ae98d539072299cf5112
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15547
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The SCI interrupt can be routed to different IRQs using ACPI control
register. Instead of using hard coded IRQ9 for ACPI table generation
read back the register and return the used IRQ number. This way SCI IRQ
can be modified (e.g. for a given mainboard) and ACPI tables will
remain consistent.
Change-Id: I534fc69eb1df28cd8d733d1ac6b2081d2dcf7511
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: York Yang <york.yang@intel.com>
|
|
Enable NC FPGA driver for this mainboard.
Change-Id: I87b6b10038f3d161a25b2008b7ea44b5627cca43
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15545
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add driver code to initialize Siemens NC FPGA as PCI device.
Beside some glue logic it contains a FAN controller and
temperature monitor.
Change-Id: I2cb722a60081028ee5a8251f51125f12ed38d824
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15543
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There are several different macros available to convert a PCI device and
function to a single 8 bit value. One is PCI_DEVFN and is defined in
device/pci_def.h. The other is DEV_FUNC and is defined in several intel
fsp based chipset implementations. In fsp_broadwell_de DEV_FUNC is even
used without being defined at all. This patch unifies the situation so
that only PCI_DEVFN is used.
Change-Id: Ia1c6d7f3683badc66d15053846936d88aa836632
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15546
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable the usage of DRIVER_INTEL_I210 and provide a function to search
for a valid MAC address for all i210 devices using hwilib.
Change-Id: Ic0f4f1579364cf5b0111334a05a8a0926785318b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15517
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The function mainboard_get_mac_address() is used to get a MAC address
for a given i210 PCI device. Instead of passing pure numbers for PCI
bus, device and function pass the device pointer to this function. In
this way the function can retrieve the needed values itself as well as
have the pointer to the device tree so that PCI path can be evaluated
there.
Change-Id: I2335d995651baa5e23a0448f5f32310dcd394f9b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15516
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ib7aa1d1b32adcb541a155b8ba2ee011cb5bcf784
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15055
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This patch adds the basic framework for SCI to GPE routing code.
BUG = chrome-os-partner:53438
TEST = Toogle pch_sci_l from ec console using gpioset command and
see that the sci counter increases in /sys/firmware/acpi/interrupt
and also 9 in /proc/interrupts.
Change-Id: I3b3198276530bf6513d94e9bea02ab9751212adf
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15324
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
On Apollolake CSE can be used to fetch firmware from boot media. However,
when this feature is not used, CSE needs to be explicitly notified of it
before memory training is complete. This way it can transition to next
state.
BUG=chrome-os-partner:53876
TEST=CSE can be power-gated during S0iX. Confirmed with LTB.
Change-Id: I5141bff350b6c0bb662424b7b709f0787ec5fd28
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15494
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add DA7219 support in acpi.
DA7219 has advanced accessory detection functionality.
Also add DA7219's AAD as a ACPI data node.
Change-Id: I979275cb2ab1e593ff1e5d360bea83b843e45032
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15436
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the Audio DSP device for apollolake as a PCI driver with a static
scan_bus handler so generic devices can be declared under it.
This is for devices like the Maxim 98357A which is connected on the
I2S bus for data but has no control channel bus and instead just has
a GPIO for channel selection and power down control and needs to
describe that GPIO connection to the OS via ACPI.
Change-Id: Icb97ccf7d6a9034877614d49166bc9e4fe659b12
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Reviewed-on: https://review.coreboot.org/15528
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The P2SB device is device 0xd and function 0. If hidden that
causes the latter pci devices on function >= 1 to not be probed
in the kernel. This is also a problem for coreboot if the P2SB
device is hidden by FSP. That means the coreboot driver won't
be ran. Therefore, provide hide and unhide functions for the
P2SB device.
The other quirk is to allow the GPIO devices to work correctly.
Those devices are ACPI devices. However, their resources are
sub-regions within the P2SB BAR. Sadly, linux doesn't handle
ACPI devices being children of PCI devices. This leads to resource
conflict errors when the P2SB device is visible. For the
time being keep the P2SB device hidden, but also ensure the
resources it is using are accounted for and reserved. The fallout
of that is the PMC and SPI device are no longer probed by the
kernel.
BUG=chrome-os-partner:53017
TEST=Ensured P2SB device is visible and pci resources are allocated
correctly for the devices.
Change-Id: I24e59bbde74310e1ce8425b344a3ad0b88702153
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15530
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Correct the GPP PCIe lane number comments so that they match the code.
Change-Id: If27c6a55ebedb0927dd9e8c7c9a833194e129a25
Signed-off-by: Derek Waldner <derek.waldner.os@gmail.com>
Reviewed-on: https://review.coreboot.org/15095
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Have the different acpi_device_ path functions use a different static
buffer so they can be called interchangeably.
Change-Id: I270a80f66880861d5847bd586a16a73f8f1e2511
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15521
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the function defined in gpio.h to translate a gpio_t into a
value for use in an ACPI GPIO pin table.
For skylake this just returns the gpio_t value as the pins are
translated directly and they are all in the same ACPI device.
Change-Id: I00fad1cafec2f2d63dce9f7779063be0532649c7
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15520
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The upstream kernel driver is not using the of-style naming for
sdmode-gpio so remove the maxim prefix, and remove the duplicate
entry for the sdmode-delay value as well.
Also fix the usage of the path variable, since the device path uses
a static variable it can't be assigned that early or it will be
overwritten by later calls.
This results in the following output for the _DSD when tested on
reef mainboard:
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package (0x02)
{
Package (0x02)
{
"sdmode-gpio",
Package (0x04)
{
\_SB.PCI0.HDAS.MAXM,
Zero,
Zero,
Zero
}
},
Package (0x02)
{
"sdmode-delay",
Zero
}
}
})
Change-Id: Iab33182a5f64c89151966f5e79f4f7c30840c46f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15514
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There are four GPIO communities in this SOC and they are implemented
as separate ACPI devices. This means the pin number that is used in
an ACPI GPIO declaration needs to be relative to the community that
the pin resides in. Also select GENERIC_GPIO_LIB in the SOC Kconfig
so this function actually gets used.
This was tested on the reef mainboard by verifying the output of the
SSDT for the Maxim 98357A codec that the assigned GPIO_76 is listed
as pin 0x24 which is the value relative to the Northwest community.
Change-Id: Iad2ab8eccf4c91185a075ffce8d41c81f06c1113
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15513
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a function for an SOC to define that will allow it to map the
SOC-specific gpio_t value into an appropriate ACPI pin. The exact
behavior depends on the GPIO implementation in the SOC, but it can
be used to provide a pin number that is relative to the community or
bank that a GPIO resides in.
Change-Id: Icb97ccf7d6a9034877614d49166bc9e4fe659bcf
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15512
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instantiate the touchpad using the drivers/i2c/generic device driver
to generate the ACPI object in the SSDT.
There is not currently a separate wake pin for this device, this will
be added in EVT hardware.
This was tested on the reef board by ensuring that the touchpad device
continues to work in the OS.
Also remove the LPC TPM from the DSDT as it is not present.
Change-Id: I3151a28f628e66f63033398d6fab9fd8f5dfc37b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15481
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Support the I2C interfaces on this SOC using the Intel common lpss_i2c
driver. The controllers are supported in pre-ram environments by
setting a temporary base address in bootblock and in ramstage using
the naturally enumerated base address.
The base speed of this controller is 133MHz and the SCL/SDA timing
values that are reported to the OS are calculated using that clock.
This was tested on a google/reef board doing I2C transactions to the
trackpad both in verstage and in ramstage.
Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15480
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for the soc_acpi_name() handler in the device operations
structure to translate a device path into ACPI name.
In order to make this more complete add some missing devices in
include/soc/pci_devs.h.
Change-Id: I517bc86d8d9fe70bfa0fc4eb3828681887239587
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15479
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
That function is no longer used. All users have been updated to
use the ulzman() function which specifies lengths for the input
and output buffers.
Change-Id: Ie630172be914a88ace010ec3ff4ff97da414cb5e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15526
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I22441ee0d19aa1b2e2f40278ce30092c86e0adc9
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15522
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Boards broken with commit:
062ef1c AGESA boards: Split dispatcher to romstage and ramstage
Boot failure with asus/f2a85-m witnessed around MemMS3Save() call,
message "Save memory S3 data in heap" in verbose agesa logs was
replaced by a system reset.
Default stubs for MemS3ResumeConstructNBBlock() returned TRUE
without initializing the block contents. This would not work for case
with multiple NB support built into same firmware.
MemMCreateS3NbBlock() then returned with S3NBPtr!=NULL with uninitialized
data and MemMContextSave() referenced those as invalid pointers.
There is no reason to prevent booting in the case S3 resume data is not
passed to ramstage, so remove the ASSERT(). It only affects builds with
IDSOPT_IDS_ENABLED=TRUE anyways.
Change-Id: I8fd1e308ceab2b6f4b4c90f0f712934c2918d92d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15344
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Have the Skylake SOC generate ACPI timing values for the enabled I2C
controllers instead of passing it in the DSDT with static timings.
The timing values are generated from the controller clock speed and
are more accurate than the hardcoded values that were in the ASL which
were originally copied from Broadwell where the controller is running
at a different clock speed...
Additionally it is now possible for a board to override the values
using devicetree.cb. If zero is passed in for SCL HCNT or LCNT then
the kernel will generate its own timing using the same forumla, but if
the SDA hold time value is zero the kernel will NOT generate a correct
value and the SDA hold time may be incorrect.
This was tested on the Chell platform to ensure all the I2C devices on
the board are still operational with these new timing values.
Change-Id: I4feb3df9e083592792f8fadd7105e081a984a906
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15291
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Configure GPIO_199 and GPIO_200 as NF2 to work as HPD.
Change-Id: If3aa6b75ed22c221cfbedaecf16035cdd9939387
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-on: https://review.coreboot.org/15447
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add ACPI NHLT table generation that the current hardware
supports.
Reef supports two audio codecs, Dialog 7219 for headsets
and Maxim 98357 for speakers.
Change-Id: Ie39947960c86b8f65140834e31f9ed9f1b578485
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15440
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add ACPI NHLT table generation that the current hardware
supports as well select the hardware used on the board.
Amenia has support for two audio codecs, Dialog for
headsets and Maxim for speakers.
Change-Id: Iaba9ec81ffb4f128f2e4413dec5174d9ecb856c9
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15024
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide the initial NHLT support for the following hardware:
1. 2 channel digital microphone array
2. Dialog 7219 headset
3. Maxim 98357 speaker amplifiers.
The code utilizes the Intel SoC common NHLT support.
Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15504
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The nvs.h header is the one which defines global_nvs_t proper.
Don't rely on an indirect inclusion.
Change-Id: I89d6a73f65e408c73f068b4a35b5efd361a6e5d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15503
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Every other platform has global_nvs_t as a typedef. For some
reason apollolake didn't bother following current conventions.
Fix this omission to allow for better code sharing and consistency.
Change-Id: Id596eed517737759a64ce803c89ea2a05cbe2cce
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15502
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
If read_vbnv finds that the vbnv_copy is not valid, it initializes it
with the correct HEADER_SIGNATURE and other attributes. However, the
vbnv copy is checked for validity and initialized at the vboot layer as
well. Since, vboot is the owner of this data, it should be the one
initializing it. Thus, if read_vbnv sees that the data is not valid,
simply reset it to all 0s and let vboot layer take care of it. This also
removes the need for additional checks to ensure that the dirty vbnv
copy is properly updated on storage.
Change-Id: I6101ac41f31f720a6e357c9c56e571d62e0f2f47
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15498
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch exposes a function to read pmc bar.
PMC bar is read in function read_pmc_mmio_bar which
is defined static in file pmutil.c. This patch exposes
that functionality to call it from other files.
BUG=chrome-os-partner:53438
TEST= Read the PMC bar value properly from outside
pmutil file.
Change-Id: I26ee13e6ab95d3a8991c7f8ea4b3856ceb015d10
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15460
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If there is an external 16550 like UART, one needs to enable
the appropriate address ranges before console_init() is called
so that the init sequence can reach the external UART. Otherwise
the UART will only start working in ramstage and will produce
unreadable characters in romstage due to the lack of initialization.
Tested-on: Siemens MC_BDX1
Change-Id: Iafc5b5b6df14916c5ed778928521d4a8f539cf46
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15495
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add support for a fourth info block type to hwilib. This block
provides new values and is now variable in length.
Change-Id: Ia928b4a98b806ba3e80fb576b78f60bb8f2ea3fc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15478
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
More spaces missed in review.
Change-Id: I842da05ca6ad4f2c13d2d42433e41da57ccf7f96
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15500
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The nhlt_soc_serialize() and nhlt_soc_serialize_oem_overrides()
functions should be able to be leveraged on all Intel SoCs
which support NHLT. Therefore provide that functionality and
make skylake use it.
Change-Id: Ib5535cc874f2680ec22554cecaf97b09753cacd0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15490
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The nhlt_soc_add_endpoint() is no longer used. Drop its declaration.
Change-Id: I3b68471650a43c5faae44bde523abca7ba250a34
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15489
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Utilize the new NHLT helper functions by driving the NHLT
endpoints through data descriptors.
Change-Id: I80838214d3615b83d4939ec2d96a4fd7050d5920
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15488
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Whitespace fix for improper space usage for indention.
Change-Id: Ia6470bf152c57786d2d7f3d35bbf0609a2ee3ba2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15487
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
In order to ease the porting of supporting NHLT endpoints
introduce a nhlt_endpoint_descriptor structure as well as
corresponding helper functions.
Change-Id: I68edaf681b4e60502f6ddbbd04de21d8aa072296
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15486
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Change PCI macros in such a way they can be transparently used across
romstage and ramstage.
Change-Id: Idc708c1990f2fc1d941bb82efcb0a697524f2eca
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15483
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
New UPDs added to header files as well as many comment fixes. Memory
infor is now defined in FspmUpd.h and added ability to skip CSE RBP
for coreboot. Removes some UPDs that are no longer available from
source.
BUG=chrome-os-partner:54677
BRANCH=none
TEST=built and tested with FSP 143_10 version
Change-Id: I7e1f531ebbe343b45151a265ac715ae74aeffcad
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/15459
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently, read_vbnv performs a reset of the vbnv cache if it is not
valid. However, this information is not passed up to the vboot layer,
thus resulting in missed write-back of vbnv cache to storage if vboot
does not update the cache itself.
Update read_vbnv to return a value depending upon whether it wants a
write-back to be performed when save is called.
Return value:
0 = No write-back required
1 = Write-back of VBNV cache is required.
Change-Id: I239939d5f9731d89a9d53fe662321b93fc1ab113
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15457
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I09c218ca05391e8d80880be0aa5bdfd5079acf85
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Platform is with RELOCATABLE_RAMSTAGE so nothing to backup.
Change-Id: I2397db8affb084e34ca89dac4840f966b994e636
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15462
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I22a33e6027a4e807f7157a0dfafbd6377bc1285d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15461
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SD card need 20K PULLUP on D0-D3/CLOCK/COMMAND lines.
Without this SDCARD will throw data read/write errors.
BUG=chrome-os-partner:54676
TEST=Build and boot to OS.
Verify SD card is detected and data read/write works well.
Change-Id: I90da5b84dc2e488eb38f805322bd7b4dee394e5b
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/15345
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add address and length of NHLT table in ACPI.
Change-Id: Ic0959a8aae18d54e10e3fcd95bfc98a6b6e0385a
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15025
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add the audio controller device to ACPI and define the _DSM handler
to return the address of the NHLT table, if set in NVS.
Change-Id: I619dbfb562b94255e42a3e5d5a3926c28b14db3e
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15026
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Configure unused Pads as NC
and sort the pads according to the gpio community.
Move the pad configurations from mainboard to gpio.h
BUG=none
TEST=Boot to OS and check all functionalities.
Change-Id: I8e9eeebf5d75c71c521649c72612c06f3fa43701
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15327
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ic42d8490cc02a3907e2989435aab786f7c0f39c9
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15287
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ib0535bf25ce25550cc17f64177f804a70aa13fb3
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15286
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The different entry points (0x100, 0x140, ...), which were defined in
the RISC-V Privileged Specification 1.7, aren't used anymore. Instead
the Spike bootrom jumps at the start of our image, and traps are handled
through mtvec.
Change-Id: I865adec5e7a752a25bac93a45654ac06e27d5a8e
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15283
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The previous change with that intent aligned the framebuffer's
bytes-per-line to 64 instead of 32:
commit 8957dd6b52919ed634aa502dfd5b6316a6e6e055
Author: Paul Kocialkowski <contact@paulk.fr>
Date: Sun May 1 18:38:04 2016 +0200
tegra124: Align the framebuffer's bytes-per-line to 32
Change-Id: I88bba2ff355a51d42cab6a869ec1e9c534160b9c
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14816
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BRANCH=none
BUG=chrome-os-partner:54325, chrome-os-partner:54581
TEST=device off in devicetree should disable the device.
Change-Id: I5dada06cba0eea8a30f297e3a6940a36b2ff40ee
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15339
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This will allow kernel to trigger a APM SMI to enable\disable SCI
Change-Id: I1be79b7a3082c23fbaf204eff55360c46458e325
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15347
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BRANCH=none
BUG=chrome-os-partner:54325
TEST=device off in devicetree should disable the device.
Change-Id: I486a4c5e8970047477068e22b799d06caea03330
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15338
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Parse the devicetree and pass the unused device to fsp
for disabling the device function.
BRANCH=none
BUG=chrome-os-partner:54325
TEST=device off in devicetree should disable the device.
Change-Id: I784b72a43fda13aa17634bf680205ab2d36e8d09
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15337
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add support for vboot_platform_prepare_reboot which is called whenever
vboot requests reboot of the platform. SLP_TYPE needs to be set to S5 in
such conditions since the platform would no longer be in a resuming
state after reset.
Change-Id: I01392bfda90c9274cd52c1004555d250b1d539b7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15340
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ic82a732ba28ba24e42a635539cca3d76128b40b5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15247
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I3148dbbcb06676f48b6bc357124403b70b9bcb6a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15246
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I6f0cdc80870fddeaada3191e493bd85fdefee07f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15245
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We want to be able to easily change SDRAM clock rate for debugging
purposes. This patch adds configurations for 4 different clock rates.
Same configs are used for all rk3399 boards at 200, 666 and 800 MHz.
Kevin board does not run reliably at 666 MHz, an option for it is
added to run at 300 MHz, this option is available to Kevin only.
There is not much room left in the coreboot romstage section, this is
why the config file for 928 MHz is being added with this patch but is
not included in the code, one of the lower frequency options will have
to be dropped for the higher frequency option to be added.
BRANCH=none
BUG=chrome-os-partner:54144
TEST=run "stressapptest -M 1024 -s 3600" and pass on both kevin and
gru. Verified that on Kevin the firmware reports starting up
SDRAM at 300 MHz and on Gru at 800 MHz.
Change-Id: Ie24c1813d5a0e9f0f9bfc781cade9e28fb6eb2f1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: ef5e4551b79c3f0531f9af35491f2c593f8482f1
Original-Change-Id: I08bccd40147ad89d851b995a8aab4d2b6da8258a
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353493
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/15309
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This is a purely cosmetic change replacing some of the more prominent
copy and paste sections of the code with compressed versions of the
same.
BRANCH=none
BUG=none
TEST=with the rest of the patches applied stressapptest still runs for
an hour on both Kevin and Gru.
Change-Id: I492e1898e312473d07d9e5eceb3e3e10b48ee35f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: eb8043f96457d090dbbee57097bc1d685e7d32d2
Original-Change-Id: I362e0e261209ae4d4890ecb0e08bb1956c172ffd
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353774
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/15308
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add code to start up elog. This uses the EC RTC to obtain the timestamp.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages
Change-Id: I4971d661b267ae8b7e3befeff482ca703b741743
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: e4e9823d8cecbf9873e78b048e389c7a737ff512
Original-Change-Id: I0fcf55b3feccf9a0ad915deb6d323b65bf2e9811
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353822
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15306
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add this function and make it return 0, as there is no physical dev switch
(at least I think this is what we are supposed to do).
This is needed for elog to work, which is needed so we can test RTC
properly.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages:
elog_init()
SF: Detected W25Q64 with sector size 0x1000, total 0x800000
elog_find_flash()
FMAP: area RW_ELOG found @ 5d8000 (32768 bytes)
elog_scan_flash()
elog_is_buffer_clear(base=0x000000000031d668 size=4096)
ELOG: flash area invalid
elog_flash_erase(address=0x000000000031d668 offset=0x005d8000 size=4096)
SF: Successfully erased 4096 bytes @ 0x5d8000
elog_prepare_empty()
elog_flash_write(address=0x000000000031d668 offset=0x005d8000 size=8)
elog_scan_flash()
elog_is_buffer_clear(base=0x000000000031d668 size=4096)
elog_is_header_valid()
elog_update_event_buffer_state()
elog_is_buffer_clear(base=0x000000000031d670 size=4088)
elog_is_area_valid()
ELOG: FLASH @0x000000000031d668 [SPI 0x005d8000]
ELOG: area is 4096 bytes, full threshold 3834, shrink size 1024
elog_add_event_raw(type=16)
out: cmd=0x44: 03 b9 44 00 00 00 00 00
in-header: 03 3f 00 00 04 00 00 00
in-data: 6e 4c 00 00
elog_flash_write(address=0x000000000031d670 offset=0x005d8008 size=11)
ELOG: Event(16) added with size 11
elog_add_event_raw(type=17)
out: cmd=0x44: 03 b9 44 00 00 00 00 00
in-header: 03 3f 00 00 04 00 00 00
in-data: 6e 4c 00 00
elog_flash_write(address=0x000000000031d67b offset=0x005d8013 size=13)
ELOG: Event(17) added with size 13
elog_add_event_raw(type=A0)
out: cmd=0x44: 03 b9 44 00 00 00 00 00
in-header: 03 3f 00 00 04 00 00 00
in-data: 6e 4c 00 00
elog_flash_write(address=0x000000000031d688 offset=0x005d8020 size=9)
ELOG: Event(A0) added with size 9
elog_add_boot_reason: Logged dev mode boot
I can't actually see the timestamp, but the EC traffic is visible.
Change-Id: I82bcf296dce4f4d146edf90b23bfae955fbe9e3a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: ffc7a7e0e7b136144d2a0b2ed21a543eafee49fa
Original-Change-Id: I1489c6b874cc49495635aec0bf303f7098455716
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353821
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@google.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15305
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Display the current time from the EC.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=(partial) boot on gru and see output:
Date: 1970-01-17 (Saturday) Time: 1:42:44
Then reboot ~10 seconds later and see output:
Date: 1970-01-17 (Saturday) Time: 1:42:53
Change-Id: I4288efc56f00e47f7575d0379a44871351da6200
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: d0361193e0ec135e21f0611d7fa6e5c02f2b2bfc
Original-Change-Id: I04a072c788ba3fc915e6d73703f966955bbd3e7e
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351783
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15304
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Obtain the real-time clock value from the EC on start-up and show the
current time.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=(partial) with future commits and EC clock set, boot on gru into
Linux shell and check the firmware log:
localhost ~ # grep Date: /sys/firmware/log
Date: 2016-06-20 (Monday) Time: 18:09:16
Change-Id: Id3ef791f546419c4881a891251cbb62d7596884b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 348e9373b0e95a17f5c39ec28a480712e6e45caf
Original-Change-Id: Iff43b16a86d9fee483420ee2eff5ff3d276716a3
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351781
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15303
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Implement writeat and eraseat support into the region_device_ops struct.
Change-Id: Iac2cf32e523d2f19ee9e5feefe1fba8c68982f3d
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15318
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Id49319ec6b52648b03eaeddfdd1580dd82110fb9
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15336
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Call basic FSP reset handling in FspNotify stage. Handling of reset requests
for other stages need to be implemented as well.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=with FSP that returns reset codes, do cold boot, check
that reboot sequence occurs properly.
Change-Id: I55542aa37e60edb17ca24ac358b61df72679b83e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15280
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Any FSP API call may request a reset. This is indicated in API function
return code. Add trivial reset handler code.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: Ieb5e2d52ffdaf3c3ed416603f6dbb4f9c25a1a7b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15334
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Global reset enable bit is not cleared on reset. Therefore, clear
the bit early. Lock down 0xcf9 so that payload/OS can't issue
global reset.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I3ddf6dd82429b725c818bcd96e163d2ca0acd308
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15199
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Some features of PMC needs to be accessed before romstage. Hence,
move PMC BARs setup into bootblock.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I14493498314ef1a4ce383e192edccf65fed2d2cb
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15332
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Apollolake defines Global Reset where Host, TXE and PMC are reset.
During boot we may need to trigger a global reset as part of platform
initialization (or for error handling). Add functions to trigger
global reset, enable/disable it and lock global reset bit.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I84296cd1560a0740f33ef6b488f15f99d397998d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15198
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add prototype for global_reset() that some SoCs need to provide.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I8afe076b6f4f675b3c6a3ec0e4dd69f950baa4ef
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15333
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Looks like we need to do real cold reset in some FSP flows, so
reverting this.
This reverts commit 6f762171de4b8514fddd430052cbf24524e09e5d.
Change-Id: Ie948d264c4e2572dab26fdb9462905247a168177
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15331
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Some platforms have an RTC provided by the Chrome OS EC. Allow the EC to
implement rtc_get() so that this can be plumbed in.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=(partial) with future commits, boot on gru and see output:
Date: 1970-01-17 (Saturday) Time: 1:42:44
Then reboot ~10 seconds later and see output:
Date: 1970-01-17 (Saturday) Time: 1:42:53
Change-Id: I3b38f23b259837cdd4bd99167961b7bd245683b3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 4a4a26da37323c9ac33030c8f1510efae5ac2505
Original-Change-Id: Icaa381d32517dfed8d3b7927495b67a027d5ceea
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351780
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15302
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add functions to convert between seconds and a struct rtc_time. Also
add a function that can display the time on the console.
BUG=chrome-os-partner:52220
BRANCH=none
TEST=(partial) with future commits and after setting RTC on the EC:
boot on gru into linux shell, check firmware log:
localhost ~ # grep Date: /sys/firmware/log
Date: 2016-06-20 (Monday) Time: 18:01:44
Then reboot ~10 seconds and check again:
localhost ~ # grep Date: /sys/firmware/log
Date: 2016-06-20 (Monday) Time: 18:01:54
Change-Id: Id148ccb7a18a05865b903307358666ff6c7b4a3d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 3b02dbcd7d9023ce0acabebcf904e70007428d27
Original-Change-Id: I344c385e2e4cb995d3a374025c205f01c38b660d
Original-Signed-off-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351782
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was tesed on a Chell mainboard since I lack a kunitmisu device.
I used different GPIOs across boots to verify that the different
audio codec devices would be "detected" and generated in the SSDT.
Change-Id: I9b3b2247a84aeb7c07780958377d5bea14417ce6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15317
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was tested on a Chell mainboard since I lack a lars device.
Change-Id: Ifba6fc6589ddd54f4c85e8858f17997fbb4b6176
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15316
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was verified on a glados board by verifying the SSDT contents
against what used to be in the DSDT.
Change-Id: I710cbb8462d0fe695297102a64bec8e4212acc65
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15315
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Declare the mainboard attached devices in the devicetree and enable
the provided device drivers by default to generate the ACPI objects
for these devices. Then remove the static ACPI objects from the DSDT
in mainboard.asl.
This was verified by comparing the generated ACPI code in the SSDT
to what was in mainboard.asl and ensuring the contents are
functionally equivalent.
Change-Id: I4725bbe2d47178568e3024fe3bb48cc80ff861c3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15314
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I3400611095978421c7b35a7ea9c68b8571942ae9
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15138
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Rewrite inline assembly for ARMv7+ to correctly annotate inputs and
outputs. On ARM GCC 6.1.1, this causes assembly output to change from
the incorrect
@ r0 is allocated to hold dst and x0
@ r1 is allocated to hold src and x1
ldr r0, [r1] @ clobbers dst!
ldr r1, [r1, #4]
str r0, [r0]
str r1, [r0, #4]
to the correct
@ r0 is allocated to hold dst
@ r1 is allocated to hold src and x1
@ r3 is allocated to hold x0
ldr r3, [r1]
ldr r1, [r1, #4]
str r3, [r0]
str r1, [r0, #4]
Also modify checkpatch.pl to ignore spaces before opening brackets when
used in inline assembly.
Change-Id: I255995f5e0a7b1a95375258755a93972c51d79b8
Signed-off-by: Benjamin Barenblat <bbaren@google.com>
Reviewed-on: https://review.coreboot.org/15216
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Correct standard manufacturer's identification code.
Change-Id: I273711e121a61a91176c15cd4cab75420f1f5a39
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15271
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add SDRAM or module types to byte 2.
Change-Id: Id6e654a3a714c164bc9a7fbd9ab3e2f3c44ca5ea
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15265
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Correct the definitions for 16b and 32b SO-DIMM modules.
Regarding JEDEC Standard No. 21-C
Annex K: Serial Presence Detect for DDR3 SDRAM Modules (2014),
the hex values used for 16b-SO-DIMM is 0x0c
and for 32b-SO-DIMM module type is 0x0d
Change-Id: I9210ac3409a4aaf55a0f6411d5960cfdca05068d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15262
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Correct the definitions and add 72b-SO-CDIMM and 72b-SO-RDIMM
Change-Id: I33532e30f45f6c8c0eb6d47b0bea87689d2d9a1a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15204
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add SSTL 1.8 V Interface Level as specified in
JEDEC_DDR2_SPD_Specification_ Rev1.3, page 10.
Change-Id: I0112a85f557826b629109e212dbbc752aeda305d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15202
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I6afcc17ec8511d3fd4c1ac3b15d523d9b6752120
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15321
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Broken with commit:
2585209 mb/samsung/lumpy/romstage: read SPD data of removable DIMM
The blob can pick SPDs from the addresses defined in pei_data
and we do only define read_spd() with USE_NATIVE_RAMINIT.
Change-Id: Ibd6d7a4a53fa808b476d3060872cb10d3dfce534
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15329
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Broken with commit:
5c10abe nb/intel/sandybridge: increase MMCONF_BASE_ADDRESS
Available sandybridge/systemagent-r6.bin has MMCONF hard-coded
at some places and samsung/lumpy fails at boot here:
CBFS: Locating 'mrc.bin'
CBFS: Found @ offset 9fec0 size 2fc94
System Agent: Starting up...
System Agent: Initializing
These are the last lines as captured over USB debug.
Change-Id: I441847f0e71a5e1be9c8ef6a04a81eb7bdd8a6d9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15328
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Mark 256KiB at end of BIOS region as unusable BIOS region is
memory-mapped just below 4GiB, however last 256KiB is unusable. Mark it
accordingly in fmd file.
2. Use up holes in RW region for RW_A and RW_B.
3. Fill up holes in RO with UNUSED regions.
BUG=chrome-os-partner:54672
Change-Id: I5facc566bb70d950522e12228b0631ddf00ac63d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15313
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
for per cs training, there should be more cycles to switch delay line.
so increase W2W_DIFFCS_DLY_F0 value from 0x1 to 0x5.
BRANCH=none
BUG=chrome-os-partner:54144
TEST=run "stressapptest -M 1024 -s 1000" and pass
Change-Id: I11720b7c6f009789b88ca26fc5da88597ed1622e
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 9de93beae09174d50a31d2df655529f71628f77c
Original-Change-Id: Ide23fff04fd63fb0afc538b610b7685756f79f8d
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/352953
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/15307
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
After write leveling for all ranks, check the
PHY_CLK_WRDQS_SLAVE_DELAY result, if the two ranks in one slice both
meet (0x200-PHY_CLK_WRDQS_SLAVE_DELAY < 0x20) or
(0x200-PHY_CLK_WRDQS_SLAVE > 0x1E0), enable PHY_WRLVL_EARLY_FORCE_ZERO
for this slice, and trigger write leveling again.
BRANCH=none
BUG=chrome-os-partner:54144
TEST=run "stressapptest -M 1024 -s 1000" and pass
Change-Id: I1a0e4e888eb62b5fae5b5e5437a385e8660a246d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 717cbac97b2045f2934e99859ce405aa3637b1c4
Original-Change-Id: Ic0d7c59404e870a7108ed64bbf3215fcc2d0973e
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351825
Reviewed-on: https://review.coreboot.org/15300
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
To fully define TPM attachment to a SPI interface both bus and CS
(chip select) settings are required. Add the missing CS configuration
option.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied it is possible to compile in
and run TPM2 SPI driver.
Change-Id: If297df8e5b9526f156ed1414eb9db317d6af5b33
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/353913
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15299
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This introduces a SPI TPM driver compliant with the TCG issued "TPM
Profile (PTP) Specification Revision 00.43" which can be found by
googling its title.
The driver implements both the hardware flow control protocol and the
TPM state machine.
The hardware flow control allows to map SPI based TPM devices to the
LPC address space on x86 platforms, on all other platforms it needs to
be implemented in the driver software.
The tis layer is somewhat superficial, it might have to be expanded
later.
A lot more implementation details can be found in the code comments.
Also, it is worth mentioning that this is not a complete version of
the driver: its robustness needs to be improved, delay loops need to
be bound, error conditions need to propagate up the call stack.
BRANCH=none
BUG=chrome-os-partner:52132, chrome-os-partner:50645, chrome-os-partner:54141
TEST=with the rest of the patches applied coreboot is able complete
Chrome OS factory initialization of the TPM2 device.
Change-Id: I967bc5c689f6e6f345755f08cb088ad37abd5d1c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5611c6f7d7fe6d37da668f337f0e70263913d63e
Original-Change-Id: I17d732e66bd231c2289ec289994dd819c6276855
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/350124
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15298
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Tested-by: build bot (Jenkins)
|
