summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-09-29mb/google/brya: Update PCH power cycle related durationsTim Wawrzynczak
The voltage rail discharge times have been measured, so therefore the boot time on a cold boot when the CSE must go through a global reset and thus a trip to S5 can be optimized. Select the lowest applicable value for each PchPmSlp UPD that can be used with these measurements. This is programmed in the baseboard because the measured discharge times leave (what should be) plenty of margin for variants to also not violate any power sequencing guidelines from the PDG. BUG=b:184799383 TEST=verified time in S5 during a global reset is ~1s instead of 4s Change-Id: Ia373c47b3967d68ddac21707c6eb4565d9d6519e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-09-29soc/intel/alderlake: Add support for power cycle and SLP signal durationTim Wawrzynczak
The UPDs for PM power cycle duration and SLP_* signal durations are all identical to Tiger Lake, so add similar support, but use enums instead of comments to represent the durations symbolically. BUG=b:184799383 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4a531f042658894bcbc6a76eff453c06e90d66b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57891 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29mb/google/dedede: Remove drawcia_legacy board supportKarthikeyan Ramasubramanian
Support for drawcia_legacy board is cancelled. Hence remove the board support. BUG=b:192256341 TEST=None Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I76cd3e388439f5aee94a17fe35ae210f449cfbfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-09-29mb/google/dedede: Remove Boten_Legacy board supportKarthikeyan Ramasubramanian
Support for Boten_legacy board is cancelled. Hence remove the board support. BUG=b:192256341 TEST=None Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If26dc869ff95dff70c0f83a13f6f727aa5992dbd Reviewed-on: https://review.coreboot.org/c/coreboot/+/57999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-09-29mb/google/dedede: Remove wheelie variant board supportKarthikeyan Ramasubramanian
Wheelie variant board has been cancelled. Remove wheelie variant board support. BUG=b:192256341 TEST=None Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3ad5bc1c987feb55183a663937794781c7301a48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-09-29mb/google/dedede: Remove cappy variant supportKarthikeyan Ramasubramanian
Cappy variant is cancelled. Hence delete the cappy variant support. BUG=b:192256341 TEST=None Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If43188a3e6bf4f4449c7e2d08be7609efe58dca1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-09-29{sb,soc}/intel: Drop unused globalnvs.asl methodsAngel Pons
These methods are never used in the code. Drop them. Change-Id: If5568b494f821d2647ada5ae845bcd015708520e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29{sb,soc}/intel: Drop PRMx from GNVSAngel Pons
These fields are never used in the code. Drop them. Change-Id: Icd07f2d704c19126bf6df4d740c21d5a1342061b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29{sb,soc}/intel: Drop LCKF from GNVSAngel Pons
This field is never used in the code. Drop it. Change-Id: I88207ec369ab83823ef2f3fc40f68a0980ce9663 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29soc/mediatek/mt8195: initialize DFDRex-BC Chen
DFD (Design for Debug) is a debugging tool, which scans flip-flops and dumps to internal RAM on the WDT reset. After system reboots, those values could be showed for debugging. BUG=b:192429713 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ied63913db94b2e52ab394a66c70f7edfd507c99b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57980 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-29vc/mediatek/mt8195: Remove unused codeRyan Chuang
Remove unused drivers and some fast calibration implementations to align with the latest MTK memory reference code. TEST=boot to kernel Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I2e6be2e16c139e48c65352fe2eabf16bf9cd550a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57978 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-28mb/purism/librem_skl: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I2c4fb1933eda2eb75bfe9181f13e189ec66cadf9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-09-28mb/google/brya/variants/taeko: add NVMe GPIOs to early_gpio_tableKevin Chang
NVMe needs extra time to run boot process, enable power and deassert reset for NVMe earlier in the boot flow that taeko can successfully boot into OS with non-serial coreboot. BUG=b:199969366 & b:200711149 TEST=Build FW and test with non-serial FW reboot 20 times pass. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I032c5b90fb2148c4075d6ead3e4161c0cc659b20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-28mb/google/dedede/var/magolor: Add custom Wifi SAR for magmaTyler Wang
Add wifi sar for magma. Due to fw-config cannot distinguish between magolor and magma. Using sku_id to decide to load magma custom wifi sar. BUG=b:192423859 TEST= emerge-dedede coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Iac15e958e61be6e3c136fb9be18b4695823ad1c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-28arch/x86: Make sure compiler knows we're stopping in hlt()Martin Roth
Currently, static analyzers don't recognize that hlt() doesn't return, so they show errors like uninitialized variables assuming that it does return. This takes care of that problem. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ia2325700b10fe1f89d749edfe5aee72b47d02f2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-28mb/google/dedede/var/galtic: Update PL1 min and max for Galith/GallopFrankChu
Update PL1 min and max values to 6 W for Galith/Gallop systems. BUG=b:201010771 BRANCH=None TEST=Build and verify on Galith/Gallop system Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I0dfda3c2c830a2ce203668431f396859e782aa3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-28vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2374_01Ronak Kanabar
The headers added are generated as per FSP v2374_01. Previous FSP version was v2347_00. Changes Include: - Offset change in FspmUpd.h and FspsUpd.h BUG=b:201239436 BRANCH=None TEST=Build and boot brya Cq-Depend: chrome-internal:4150766 Change-Id: I097e854bcb4033bdaf2498fb97b255e87d3dd70f Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57920 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-28mb/google/brya/primus: modify HID to MX98360A for next build phaseMalik_Hsu
For the next build phase, modify the HID of the speaker amp to MX98360A. BUG=b:199098681 BRANCH=none TEST=build coreboot without error Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I0c318464fca7d35bbffd7ea0f5694b83acedff0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-28soc/intel/baytrail: Always handle MRC as ELF fileAngel Pons
The current MRC binaries for Bay Trail are always ELF files. Always adjust the position in CBFS using the ELF header regardless of file names. Without adjusting the position, the system hangs right after calling into MRC. TEST: MRC position in CBFS does not change for bostentech/gbyt4. Change-Id: I74e1246a5fac3f3649be9842ff13c2fc70f72a20 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57989 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-28mb/google/dedede/var/kracko: refactor DPTF section for overridesRobert Chen
Refactor DPTF section of code under the kracko overridetree. This makes kracko override dptf section of dedede/baseboard, because the DPTF tool's CRT, PSV and TSR3 settings are different than expected. BUG=b:187482019 BRANCH=dedede TEST=Built and tested on dedede system Change-Id: Iacc543f961a7f4652ee8583920b1794f916c7ec9 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27soc/qualcomm/sc7280: Enable QUP drivers to use lz4 compressionShelley Chen
BUG=b:182963902 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -B Change-Id: I3ec557bdf2286c3f60902d5ac018b536fe99afa3 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57896 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27soc/intel/baytrail: Drop invalid `VGA_BIOS_FILE` defaultAngel Pons
This file does not exist in the coreboot tree. One should place this file in the `site-local` subdirectory and specify the paths by means of `site-local/Kconfig`. Change-Id: I86ac2a6176947f12194bec6b63bedd7db79820a0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-27ec/purism: Remove copied code from system76Arthur Heymans
This code is identical except for some renaming. Change-Id: I93795a6087ce0daca27c0d5038a1febd6ca9c775 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-09-27arch/x86,cpu/x86: Move cpu_info initialization instructions into macroRaul E Rangel
This will help reduce duplication and make it easier to add new members to the cpu_info struct. BUG=b:194391185, b:179699789 TEST=Compare assembly of romstage and ramstage before and after Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I31f264f4bb8b605fa3cb3bfff0d9bf79224072aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/57859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-27soc/amd/cezanne/early_fch: move mb_set_up_early_espi into if blockFelix Held
mb_set_up_early_espi should only be called when SOC_AMD_COMMON_BLOCK_USE_ESPI is selected. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic8ad724a2a79c1995fbe9d97f11a0f69eed9435c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-27soc/amd/cezanne: Enable CCP DMAKarthikeyan Ramasubramanian
Enable CCP DMA use in PSP verstage. This helps to reduce the boot time. BUG=b:194990811 TEST=Build and boot to OS in Guybrush. Observed a 35 - 40 ms improvement in the boot time. Before CCP DMA: 508:finished loading body 898,286 (287,576) Total Time: 2,146,182 After CCP DMA: 508:finished loading body 853,627 (240,061) Total Time: 2,110,117 Cq-Depend: chrome-internal:4116566 Change-Id: I6e4f081622a2ec78763adf56548204efc1bccf39 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27soc/amd/common/psp_verstage: Introduce boot device driverKarthikeyan Ramasubramanian
PSP verstage can access the boot device either in Programmed I/O mode or DMA mode. Introduce a boot device driver and use the appropriate mode based on the SoC support. BUG=b:194990811 TEST=Build and boot to OS in Guybrush. Change-Id: I8ca5290156199548916852e48f4e11de7cb886fb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57563 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27mb/google/brya/var/kano: Move max98373 amp ACPI info to I2C0David Wu
Move max98373 amp ACPI info to I2C0 according to kano's schematics version KANO_MLB_Proto_0811. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8f7a7938dd407666e0104ba64b22da85216a145f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27mb/google/brya: Correct SSD power sequenceEric Lai
SSD sometimes can't be detected in in warm/cold boot stress. M.2 spec describes SSD_PREST should be sequenced after power enable. BUG=b:199822704 TEST=SSD was always discovered in warm/cold boot stress. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If0a9e36cda4dc91bbccec02f39ccb9b658d24056 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27soc/amd/cezanne, vc/amd/fsp/*: Add support for CCP DMA SVC callKarthikeyan Ramasubramanian
Add support to access the boot device from PSP through Crypto Co-Processor (CCP) DMA. Implement a SVC call to use CCP DMA on SoCs where it is supported and a stub on SoCs where it is not supported. This provides an improved performance while accessing the boot device and reduces the boot time by ~45 ms. BUG=b:194990811 TEST=Build and boot to OS in guybrush. Perform cold and warm reboot cycling for 250 iterations. Change-Id: I02b94a842190ac4dcf45ff2d846b8665f06a9c75 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27mb/google/hatch/moonbuggy: Update DPTF parametersKenneth Chan
Update the DPTF parameters received from the thermal team. BUG=b:188596619 TEST=emerge-ambassador coreboot Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I081963b97ed2dae0f5d026f6443c954b52347a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57919 Reviewed-by: Joe Tessler <jrt@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27mb/system76/gaze15: Disable OC supportTim Crawford
Clevo indicated that DIMMs running at 2933 MHz are not supported on a number of processors used for this model. Change-Id: Iadf611a64de664c783696e51cfe858ca95903936 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/system76/lemp10: Use PME virtual wire for SWITim Crawford
Match the behavior of the other TGL-U boards. Change-Id: Ida962255f7a2435319d739d59eb2dc58fe342ae8 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/system76: rtd3: Remove SrcClk pin on CPU RPTim Crawford
Setting srcclk_pin only works for PCH PCIe devices. Disable them on the CPU RP and add a TODO. Change-Id: I32db116feb33a8448eb8586fe9e882b8879489d4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/intel/kblrvp: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: Ibb63f3ecd9cfbb6f564e0a9968c2776c25d84f79 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/51nb/x210: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I7255ac1ec6c43dd4b21325ae60e117458bea956d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/razor/blade_stealth_kbl: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I375ab879dd95d6a7a20644dc36312a1e62f58226 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/facebook/monolith: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Change-Id: I4e5be60d2784d003a388c52254514d0ab4d002b0 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2021-09-27mb/google/glados: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Change-Id: Id26d9dfc3822b9120360fc2cb2ced8d67345a659 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/intel/kunimitsu: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Change-Id: I42458f16a323d3e37d0ee1bd8335e1f8d0e1fadc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/intel/saddlebrook: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Also, get rid of that unnecessary _SB scope. Use an absolute path for the PCI0 device instead. Change-Id: I730cd3eeffff60b3b569bfb748febbdc8ca85990 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/google/dedede/var/blipper: Generate SPD ID for supported partsZhi Li
Add the relevant memory configuration of beetley to the blipper coreboot code The memory parts being added are: 1. Micron MT53E512M32D1NP-046 WT:B 2. Samsung K4U6E3S4AB-MGCL 3. Hynix H54G46CYRBX267 BUG=b:200000608 TEST=emerge-dedede coreboot Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: I0b04f64cb007a58ae98f5ed187feb4859a43b1b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57670 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27soc/amd/common/block/include/acpimmio_map: add AOAC acronym in commentFelix Held
The Always On Always Connected block is referenced as AOAC in the code, so add that acronym in the comment and change the "Connect" to "Connected". Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6a23e0ccff62c6ceddae70e1bef5c5abf872c495 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27cpu/x86/mp_init: add expansion for SIPI acronymFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic182d7c551932ab6917a81568490ed18acdcd597 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57927 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-25soc/intel/alderlake: Use intel_microcode_find() to locate ucode.binSubrata Banik
`intel_microcode_find()` function uses cached ucode data hence it would avoid locating ucode.bin from CBFS while passing ucode.bin pointer to FSP. Change-Id: I8f92c9f20dfb055c19c6996e601c8c24767aecb7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/guybrush: Remove ALS presentationGwendal Grignou
guybrush does not have a light sensor, do not include ACPI0008 ACPI device (Light sensor that will be managed by acpi-als IIO kernel driver). BUG=b:200823325 TEST=Check on Guybrush360 the sensor is not presented. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: Id1dcb3a01ee43f780e4b118d88a0351e4c543f5a Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-09-24mb/google/brya/variants/primus: config dram speed to 3733Casper Chang
This change config the DRAM speed to 3733 for primus. BUG=b:200752480 BRANCH=none TEST=Verified that `dmidecode -t17` shows the correct configured memory speed Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I2f3a9489dddcf102b0ffc71eb9cdab6ad38d1391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/intel/adlrvp: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias for dptf_policy device. Change-Id: I02ca63ac2cc1b8ed2f5a381b3824c9beff7f33ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57870 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-24soc/intel/alderlake: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias for tcss_usb3_port* devices. Change-Id: I65d9c83a9d0aab5a42f5a7cc6df98a154e79d16a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24device: Drop unused function `dev_find_matching_device_on_bus`Furquan Shaikh
With use of device pointers, `dev_find_matching_device_on_bus()` is now unused and hence this change drops the function. Change-Id: I30fcb2d9932d770ca614cceffb15646ce8256465 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/zork: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias for following devices: 1. audio_rt5682 2. xhci0_bt 3. xhci1_bt 4. acp_machine 5. i2c2 Change-Id: I56921ab54716e4d771d9de1a479f191ca5657eba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/guybrush: Configure the level for AMD Firmware binariesKarthikeyan Ramasubramanian
AMD Firmware tool allows configuring the directory table level in which the binaries have to be added. This helps to achieve space and boot time savings. BUG=b:195329409 TEST=Build and boot to OS in Guybrush. Achieve a boot time savings of ~75 ms and space savings of ~600 KB per RW section. Change-Id: Idc212b8c4f8aacfb0132983a8055f1e97af42983 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bao Zheng <fishbaozi@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-24mb/google/brya/var/taeko: Enable SaGv supportJoey Peng
Enable SaGv support for taeko BUG=b:198548214 TEST=FW_NAME=taeko emerge-brya coreboot Flash fw into DUT and can boot successfully Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I580a12ca511d8cde6fee1079e39e6976202da4d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Set vGPIO configurationDavid Wu
Due to the vGPIO is not set correctly, without setting those pins for PEG60, CPU cannot communicate with PCH about the clkreq state. BUG=b:200886824 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I6adf73103ecb02c67d9a199e13d2ead9b8b2276f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Enable EC keyboard backlightDavid Wu
Enable EC keyboard backlight for kano. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I7f56b92b60cadf72eb02fd8bcb87baf36acc16e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Enable SaGv supportDavid Wu
Enable SaGv support for kano BUG=None TEST=FW_NAME=kano emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ifc537a5137f5e6eb10cd4c160923ea4da1f6b0d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24drivers/genesyslogic/gl9755: Disable ASPM L0s supportBen Chuang
When the entry delay of L0s is less than the entry delay of L1, GL9755 will enter L0s state first. When it exits from L0s state, the time of L1 entry will be reset. Therefore, the conditions for entering L1 state cannot be met. In order to enter L1 state, L0s needs to be disabled. BUG=b:195611000 TEST=Verify GL9755 enters L1 by observing CLKREQ# de-asserts. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: If121b5cb534eb32bac8992683c3f0eee8946acec Reviewed-on: https://review.coreboot.org/c/coreboot/+/57632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24cpu/x86/mp_init: Add comment to smm_do_relocationRaul E Rangel
It took me a while to understand the SMM set up flow. This adds a clarifying comment. BUG=b:194391185, b:179699789 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9c73e416b8c583cf870e7a29b0bd7dcc99c2f5f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-09-24soc/amd/common: factor out FSP-related parts of common KconfigFelix Held
TEST=Timeless build for Mandolin results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib2fb6c29b9f42c00f252994ae2a40b7ff668105a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-24soc/amd/common: move block/pi out of the block folderFelix Held
Since the binaryPI glue code is specific to a binary interface, but not for a hardware block, move it out of the common blocks directory. This also brings the binaryPI support in line with the FSP support which is used on the newer generations. This also drops the SOC_AMD_COMMON_BLOCK_PI Kconfig option and makes use of the already existing SOC_AMD_PI Kconfig option instead. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I014e538f2772938031950475e456cc40dd05d74c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-24soc/amd/common/block: move binaryPI S3 block into PI blockFelix Held
The code in soc/amd/common/block/s3 is specific to the AMD binaryPI coreboot integration, so move the code to soc/amd/common/block/pi. This drops the SOC_AMD_COMMON_BLOCK_S3 Kconfig option and integrates the dependencies and selections into the SOC_AMD_COMMON_BLOCK_PI Kconfig option. Since only selecting SOC_AMD_COMMON_BLOCK_PI but not SOC_AMD_COMMON_BLOCK_S3 resulted in missing functions in the linking process, we don't lose support for any working configuration by only having one Kconfig option for both parts. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib2bd99a88d8b05216688bc45d9c4f23a007ce870 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-24soc/intel/alderlake: add MaxDramSpeed configCasper Chang
This change add MaxDramSpeed for variants usage to config dram speed. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: Iba0fae0ab4ff0121dc63af792458492eeb21ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/dedede/var/magolor: Add ssfc codec DA7219 supportTyler Wang
Add DA7219 codec support in maglet. BUG=b:198239769, b:196193562 TEST:emerge coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I52d980ed611b3fbe4892cd3e65e3b35931feaba5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-23soc/amd/common/blocks/include: rename gpio_banks.h to gpio.hFelix Held
This brings the AMD SoC GPIO code in line with the Intel SoC code and removes the not really needed suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie2dbec81dfe503869beb2872b01a7475e2b88b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd/common/blocks: rename gpio_banks folder to gpioFelix Held
This brings the AMD SoC GPIO code in line with the Intel SoC code and removes the not really needed suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3dfcca2f126eb49c962b5cc32cbcf72e04f3f170 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23mb/intel/adlrvp_m: Enable HECI1 communicationzhixingma
The patch enables HECI1 interface to allow OS applications to communicate with CSE. TEST=Verify PCI device 0:16.0 exposed in the lspci output Signed-off-by: zhixingma <zhixing.ma@intel.com> Change-Id: Ifd338345caa183f03097f1003080992da70296ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/57813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-09-23soc/amd: rename program_gpios to gpio_configure_padsFelix Held
Use the same function name as in soc/intel for this functionality. This also brings the function name more in line with the extended version of this function gpio_configure_pads_with_override which additionally supports passing a GPIO override configuration. This might cause some pain for out-of-tree boards, but at some point this should be made more consistent, so I don't see a too strong reason not to do this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I88852e040f79861ce7d190bf2203f9e0ce156690 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd,intel/common/include/gpio: improve documentation of overridesFelix Held
Explicitly point out that gpio_configure_pads_with_override will ignore GPIOs that are only in the override configuration, but not in the base configuration. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1bdfcac89b81fef773938133a2699897c6ee9415 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/brya/variants/gimble: Update DPTF sensorsMark Hsieh
Add two thermal sensors for fan and charger for DPTF based thermal control. BUG=b:199180746 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I1529dd5dff3445dd499ed665386a9b06d67c7028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57833 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23mb/google/brya/variants/gimble: Update audio settingMark Hsieh
Add vmon-slot-no,imon-slot-no and dsm_param_file_name in overridetree.cb BUG=b:197701952 TEST=build and check SSDT Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ie646360c4ebbf25762b374c5bc3ef2017989fb2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57832 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23mb/google: Update comments in mem_parts_used.txt to match new templatesReka Norman
BUG=b:191776301 TEST=None Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Iafcbb3ce33cd2299ff98b54b9200f3e70929fb1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google: Bulk rename mem_list_variant.txt to mem_parts_used.txtReka Norman
The variant creation script creates a placeholder file called mem_parts_used.txt, with the intent that variant owners will populate this file with memory parts as needed. But instead, some partners have been adding the parts in a new file called mem_list_variant.txt and removing the placeholder file. E.g. https://review.coreboot.org/55735. There's nothing wrong with this, but it's confusing to have two different file names which serve the same purpose. Bulk rename all the mem_list_variant.txt files to mem_parts_used.txt. The only time these file names are used is as an argument to the spd_tools part_id_gen script, so no other changes are necessary. BUG=None TEST=Re-run part_id_gen for all variants of brya/volteer/dedede/guybrush/zork. Check that the only change is to the "Generated by" comment in Makefile.inc and dram_id.generated.txt. Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Icdeee78ae5c01e97f66c759c127175b4962d5635 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/volteer: Remove unused mem_parts_used.txt from copano/collisReka Norman
The copano and collis variants have both a mem_parts_used.txt and a mem_list_variant.txt. The mem_parts_used.txt files are empty, so delete them. BUG=None TEST=None Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Ia98aad7238b0173b8d5c048d89637bc297d02283 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/zork: Migrate zork to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all zork variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for dalboz: util/spd_tools/bin/part_id_gen \ PCO \ ddr4 \ src/mainboard/google/zork/variants/dalboz/spd \ src/mainboard/google/zork/variants/dalboz/spd/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/zork -a -x --timeless Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I305a24f9345bab28ff35e317b6e7fd7efba22413 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57772 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23soc/intel/xeon_sp/cpx: Use FSP repoArthur Heymans
Some headers in vendorcode are still needed but the UPD definitions can be taken from the FSP repo. Change-Id: I7bb96649ecba9d313cfce50af202aabcf610680f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-23soc/intel/xeon_sp/cpx: Rename FSP UPDs using CPPArthur Heymans
coreboot expects different names for FSP UPDs so use some CPP to make it happy. Change-Id: I4b2c2dd6ba40cb58bc2089eb9204fd4f70b037aa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-23soc/intel/xeon_sp: correct wrong gpio register base offsetsMichael Niewöhner
Reference: Intel doc# 633935-005 and 547817 rev1.5. Change-Id: I38c20288a9839f8c3cf895f7b49941387bdca5e2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Lance Zhao Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2021-09-23soc/intel/tgl: correct wrong gpio GPI enable register base offsetMichael Niewöhner
Reference: Intel doc# 631120-001. Change-Id: Iaf3a1b7bc38a1b30f8cc901bd6496e77f2d92cfd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-23soc/intel/icelake: correct wrong gpio SMI register base offsetsMichael Niewöhner
Reference: Intel doc# 341081-002. Change-Id: If6e0503cc042c26c4077b8b32bb447d4e3a9bb6a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-23soc/intel/{xeon-sp,icl,tgl,jsl,ehl}: add NMI_{EN,STS} registersMichael Niewöhner
Add NMI_EN and NMI_STS registers, so NMI interrupts can be used. References: - XEON-SP: Intel doc# 633935-005 and 547817 rev1.5 - ICL-LP: Intel doc# 341081-002 - TGL-LP: Intel doc# 631120-001 - TGL-H: Intel doc# 636174-002 - JSL: Intel doc# 634545-001 - EHL: Intel doc# 636722-002 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I2621f4495dfd4f95f9774d9081e44c604de830a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao
2021-09-23soc/intel/icl: add missing gpio group to fix the group indexesMichael Niewöhner
There is another gpio group, namely HVCMOS, between GPP_C and GPP_E. Add it, so the group index calculation for GPI/SMI/NMI results in the correct value. Reference: Linux linux/drivers/pinctrl/intel/pinctrl-icelake.c Change-Id: I7725191173ddc0d43bbe940cdf3b0dc2aa3e5f8d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/hatch/moonbuggy: copy PCIe configuration from genesisJeff Chase
The moonbuggy pcie topology is the same as genesis so copy from its device tree and gpios in order to enable these devices. BUG=b:199746414 TEST=lspci Change-Id: I4e916a95047b9f955734f164d7578c520478f5af Signed-off-by: Jeff Chase <jnchase@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/brya/var/anahera: Update gpio and devicetreeWisley Chen
Based on latest shcematic to update the device tree and gpio. BUG=b:197850509 TEST=FW_NAME=anahera emerge-brya coreboot Change-Id: I0a999de479c7b2e4776a57e1e56b1568450ec31a Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23elog: calculate year correctly in timestampRicardo Quesada
This CL uses a 16-bit value (instead of an 8-bit value) for the year. This is needed because the function internally does a "year % 100", so the year should not be truncated to 8-bit before applying the modulo. This fixes a regression introduced in commit e929a75. BUG=b:200538760 TEST=deployed coreboot. Manually verified that year is correct using "elogtool list" TEST=test_that -b $BOARD $DUT firmware_EventLog Change-Id: I17578ff99af5b31b216ac53c22e53b1b70df5084 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/guybrush: Migrate guybrush to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all guybrush variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for guybrush: util/spd_tools/bin/part_id_gen \ CZN \ lp4x \ src/mainboard/google/guybrush/variants/guybrush/memory \ src/mainboard/google/guybrush/variants/guybrush/memory/mem_list_variant.txt For dewatt, the Makefile.inc was manually modified to use the new placeholder value. BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/guybrush -a -x --timeless Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I48ca430b80b892d68dad582b1d9937a9edafa5d4 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/dedede: Migrate dedede to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all dedede variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for cret: util/spd_tools/bin/part_id_gen \ JSL \ lp4x \ src/mainboard/google/dedede/variants/cret/memory \ src/mainboard/google/dedede/variants/cret/memory/mem_parts_used.txt For cappy, the Makefile.inc was manually modified to use the new placeholder value. BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/dedede -a -x --timeless Change-Id: I2871ff45d6202520d4466b68a4d5bb283faf2b63 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/dedede: Remove unnecessary fixed IDs from galtic mem_parts_used.txtReka Norman
Currently, trying to regenerate the galtic Makefile.inc and dram_id.generated.txt using part_id_gen fails due to duplicate fixed IDs in the mem_parts_used.txt file. Remove the fixed IDs since they aren't needed. The part IDs assigned are the same either way. Also delete the comments from mem_parts_used.txt, since lp4x/gen_part_id currently doesn't support comments. BUG=b:191776301 Regenerate the Makefile.inc and dram_id.generated.txt using gen_part_id, and check that the part IDs don't changed. Command used: util/spd_tools/lp4x/gen_part_id \ src/soc/intel/jasperlake/spd \ src/mainboard/google/dedede/variants/galtic/memory \ src/mainboard/google/dedede/variants/galtic/memory/mem_parts_used.txt Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Ida83814b2f19b4a56eb9fde5939fa6c7874803c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-23mb/google/volteer: Migrate volteer to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all volteer variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for voema: util/spd_tools/bin/part_id_gen \ TGL \ lp4x \ src/mainboard/google/volteer/variants/voema/memory \ src/mainboard/google/volteer/variants/voema/memory/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/volteer -a -x --timeless Change-Id: Ibd4f42fd421bfa58354b532fe7a67ee59dac5e1d Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/brya: Migrate brya to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all brya variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for anahera: util/spd_tools/bin/part_id_gen \ ADL \ lp4x \ src/mainboard/google/brya/variants/anahera/memory \ src/mainboard/google/brya/variants/anahera/memory/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/brya -a -x --timeless Change-Id: I08efe1d75438c81161d9b496af2fa30ce6f59ade Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23lib/Makefile.inc: Generate placeholder spd.bin in lib/Makefile.incReka Norman
When a new variant is created, it needs to have a path to its SPD binary defined. Currently, this is done by setting SPD_SOURCES to a placeholder SPD file, which just contains zero bytes. To remove the need for a placeholder file, automatically generate a single-byte spd.bin in lib/Makefile.inc when SPD_SOURCES is set to the marker value 'placeholder'. BUG=b:191776301 TEST=Change cappy/memory/Makefile to `SPD_SOURCES = placeholder`. Build and check that spd.bin contains a single zero byte. Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I11f8f9b7ea3bc32aa5c7a617558572a5c1c74c72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23soc/qualcomm/common: Move UART SC7180 driver to common sectionRajesh Patil
Move existing UART driver from sc7180 to common folder. This implements UART driver for QCOM SoC's BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I7bc2d3765f956e04bae3e45c3a9b9e2ad424c7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-23mb/google/brya/var/taeko: Correct IOM port configurationJoey Peng
Enable programming of Type-C AUX DC bias GPIOs. BUG=b:199833078 TEST=Verify that a Type-C monitor works when connected in both orientations. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I4f6d80a9f2fc8cdc93226d6c234b54e5db830d71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-22soc/amd/common/block/gpio_banks: Rework GPIO pad configurationFelix Held
Before this patch, gpio_configure_pads_with_override called program_gpios once for each GPIO that needed to be configured which resulted in base_num_pads - 1 unneeded master_switch_set/ master_switch_clr sequences for the gpio_configure_pads_with_override call. Instead implement gpio_configure_pads_with_override as the more generic function and program_gpios as a special case of that which passes an empty override configuration and override pad number to gpio_configure_pads_with_override. TEST=GPIO configuration and multiplexer register values are the same for all GPIOs on google/guybrush right before jumping to the payload before and after the patch. Change-Id: Ia8e47b2a278a1887db5406c1f863ddafa6a68675 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-22mb/system76/addw1: Add Adder WS 2 as a variantTim Crawford
Change-Id: I3965a90151bd9250a87dabc715d68a39699ff9e1 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-22mb/system76/addw1: Add System76 Adder Workstation 1Tim Crawford
Change-Id: I5dd3bc320ca640728e1d86180c6bfa0dc7295760 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-22ec/google/chromeec: Update ec_commands.hRob Barnes
This change copies ec_commands.h directly from Chromium OS EC repo at sha 8c2c6bd5b1d44b367929af498d4d4b0df126a4ef. BUG=b:188073399 TEST=Build coreboot BRANCH=None Change-Id: I674cb860adb6b8497a8aecf47952ed8f85ddaa70 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2021-09-22soc/intel/alderlake: Drop unused HECI_DISABLE_USING_SMM KconfigSubrata Banik
Earlier generation platform used `HeciEnabled` chip config (set to 0) and HECI_DISABLE_USING_SMM Kconfig to make the CSE function disable at the end of the post. `HeciEnabled` chip config remains enabled in all latest generation platforms hence drop HECI_DISABLE_USING_SMM Kconfig selection from SoC Kconfig as CSE remains default enabled. BUG=b:200644229 TEST=No functional impact during boot as CSE (B:0, D:0x16, F:0) device is listed with `lspci`. Change-Id: I5278e5c2e015b91bb3df3a3c73a6c659a56794b5 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-09-22mb/google/brya/var/redrix: Update audio settingWisley Chen
Update codec/amp setting. 1. Update hid for ALC5682VS 2. Add maxim properties. BUG=b:197076844 TEST=build and check SSDT Change-Id: I8bedd4d0737caf46769ad27bce1768c225ce8a82 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-22mb/google/brya/var/redrix: Correct SSD power sequenceWisley Chen
The current power sequencing for the SSD does not work in a non-serial enabled BIOS image. It appears that the FSP scans the PCIe RPs before the SSD has time to prepare itself for PCIe, so the FSP disables the RP and so depthcharge cannot find a boot disk. Changing the power sequence timing to enable power in bootblock and deassert reset in ramstage follows the SSD's power sequence and allows it to be discovered by the FSP so the RP does not get disabled. BUG=b:199714453 TEST=build, boot into SSD, and run reboot stress test. Change-Id: I5e7943a6cc88bc02bcbd97a1086b2d8044d7b1c3 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-21soc/amd/common/block/gpio_banks: add missing types.h includeFelix Held
In this file bool, uint8_t and uint32_t are used, so include types.h directly to have those types defined instead of relying to have those included indirectly via amdblocks/gpio_banks.h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6f4626a50219fab818e8bc5087961a731b44e71b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 17:53:23 +0000