| Age | Commit message (Collapse) | Author |
|---|
|
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips
initial probe during kernel boot and prevent privacy LED blink.
TEST=Build and boot nivviks. Monitor the camera LED blinking
during boot.
Change-Id: I979207d1b6d55f78dea20d3366ef4a833ee9c86d
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch eliminates the LPC_IOE_COMA_EN and LPC_IOE_COMB_EN IO enables
from the io_enables variable in the pch_early_iorange_init() function
because lpc_io_setup_comm_a_b() is intended to activate legacy COM
ports like COM-A (0x3F8 - 0x3FF) and COM_B (0x2F8 - 0x2FF).
These COM ports are being activated unconditionally, which is
undesirable for the Intel Alder Lake platform and causes traffic over
the IO bus.
As a result, this code is being removed and platforms that select
DRIVERS_UART_8250IO can activate legacy COM ports.
BUG=b:354066052
TEST=Able to boot google/redrix to the operating system and confirm
that there was no traffic over legacy COMs while being monitored
using the eSPI analyzer.
Change-Id: I7a6e38bd151f823d37c07ee89a800489122cc209
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84080
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the SOC_INTEL_GFX_MBUS_JOIN configuration option.
Support for fast modeset joining has been added to the mainline i915
kernel driver (https://patchwork.freedesktop.org/series/130480/),
making this coreboot-specific workaround unnecessary.
BUG=b:291885733
TEST=Successful build and boot of google/marasov with single and dual
displays, no redundant boot splash.
Change-Id: I53c08a0e7a40b24db7cc910c5b9adc2376a9bb17
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paz Zcharya <pazz@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Change-Id: I4fc824bef1daf8c12eb671c58de9019ce5a23a2e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
Now that the PSP SMI handler for flash access is also implemented for
the PSP generation 1, the PSP SMI handler can be added to the
Stoneyridge code too. The actual PSP SMI handler code will only be added
to the build when SOC_AMD_COMMON_BLOCK_PSP_SMI is selected which isn't
the default case, so this patch doesn't change the current behavior
unless that option is also selected. This SMI handler mainly added for
completeness since the PSP firmware blobs released for Stoneyridge are
probably lacking the corresponding PSP-side code to send the PSP SMI to
the host. At least if I remember correctly the PSP bootloader release
for Stoneyridge has the ability to load the secure OS removed and since
the secure OS is the runtime component, some part of that is probably
what's sending those SMIs to the host. If there are some other PSP
bootloader builds that support loading the secure OS, this patch might
still be useful for those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I78944e2de86bc1e8e277d22a7a8da517622f49a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84077
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that we have the local psp_smi_flash.h header, move the
psp_smi_spi_* function prototypes there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I12cbbabf6a960836fe0c5dc1424c08550cb66a7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84068
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Use the uint[8,16,32,64]_t data types everywhere instead of a mixture of
uint[8,16,32,64]_t and u[8,16,32,64] data types for consistency.
Suggested-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I36151ecf94619afaf690dbb73834fcff3c51fdac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add helper functions to send the PSP commands to query the fTPM and
PSP capability bits as well as the HSTI state. All SoCs using any PSP
generation support the MBOX_BIOS_CMD_PSP_FTPM_QUERY command and some
generation 1 and all generation 2 PSP SoCs support the
MBOX_BIOS_CMD_HSTI_QUERY command, so implement those two in the common
psp.c. Only PSP generation 2 supports the MBOX_BIOS_CMD_PSP_CAPS_QUERY
command, so implement that one in psp_gen2.c.
This code is ported and modified from
github.com/teslamotors/coreboot/tree/tesla-4.12-amd
Document #54267 revision 1.06 was used as reference for the 1st PSP
generation and document #55758 revision 2.04 was used for the 2nd PSP
generation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4e17f994fb332690828c55742262da793e297d99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Rename MBOX_BIOS_CMD_PSP_QUERY to MBOX_BIOS_CMD_PSP_FTPM_QUERY to bring
it a bit more in line with document #55758 revision 2.04 and to avoid
confusion when another command is added in a follow-up patch. In
document #54267 revision 1.06 this command is called
MBOX_BIOS_CMD_PSP_QUERY and in document #55758 revision 2.04 it's called
MBOX_BIOS_CMD_FTPM_QUERY, so just name it MBOX_BIOS_CMD_PSP_FTPM_QUERY
in coreboot which should be the least confusing name for it that still
somewhat aligns with the documentation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id085b34363d39528bd125dfb77596d3ed13b6fa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84065
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Implement the request buffer access functions for the PSP generation 1
case. In this case, only the SMI_TARGET_NVRAM is supported, so always
return this target NV ID and always return true in the validity checks
which in the PSP generation 2 case check if the target NV ID is valid.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7e141f846e930bab6972a281745c0180ac52c291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84064
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The request buffer data structures differ between the PSP generation 1
and 2 in the way that the generation 2 added the 64 bit target NV ID
field right at the beginning of the request buffer data structures. In
order to make the data structure definitions common, remove the
target_nv_id struct element via the preprocessor in case the
SOC_AMD_COMMON_BLOCK_PSP_GEN2 option isn't selected. Since the request
buffer data structures are now common for both generations, also remove
the 'v2' from the struct names.
Document #54267 revision 1.06 was used as reference for the 1st PSP
generation and document #55758 revision 2.04 was used for the 2nd PSP
generation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibe0bd2d8e6a5c39cc67a49e7bb3a51ce0900a39a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Factor out the code to access the request buffer into PSP generation
specific file. This is a preparation for adding PSP SMI flash access
support for the PSP generation 1 which has a slightly different request
buffer layout.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e18f7ea53592d9fd413ad56e8d137cfc13ad5d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The existing comment on the mbox_default_buffer struct was outdated and
didn't reflect the current state, so rework it to keep it a bit more
generic and also add the document number for the newer generations of
CPUs. To better document which commands use non-default buffers, add the
names of the commands using the non-default buffers to those buffer
struct definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I510d953217240243392e8a415358524257bd28b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
With LTO clang cannot find the aliased symbols.
Change-Id: I3d89c093cee2636e648987a06afb0d325b1d96ff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch removes the HAVE_ACPI_RESUME config option from the Google
Rex mainboard configuration. The Intel Meteor Lake SoC does not support
S3 (ACPI sleep state) entry/exit, and attempting S3 validation could
lead to abnormal platform behavior. This change ensures that `_S3` is
not listed as a valid wake source in the DSDT (Differentiated System
Description Table) after booting to the OS.
BUG=b:351025543
TEST=Booted google/rex successfully and verified that the `_S3` name
variable is not present in the DSDT.
Change-Id: I730ade628eea84c60ba003a0c871e729b0ee0a9f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84081
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This was adapted from CB:22693 from Iru Cai, which was based on
autoport. I do not physically have this system. Someone with physical
access to an E6230 running version A11 of the vendor firmware sent me
the VBT after running the command `intelvbttool --inlegacy --outvbt
data.vbt`. This new version of the port has not yet been tested.
The EC is the SMSC MEC5055, which seems to be compatible with the
existing MEC5035 code. As with the other Dell systems with this EC, this
board is assumed to be internally flashable using an EC command that
tells it to pull the FDO pin low on the next boot, which also tells the
vendor firmware to disable all write protections to the flash [1].
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Original-Change-Id: I8cdc01e902e670310628809416290045c2102340
Change-Id: I32927beea7c29b96a851ab77ed15b0160f16d369
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82153
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard is QAL70/LA-7741P. I do not physically have this system;
someone with physical access to one sent me the output of autoport which
I then modified to produce this port. I was also sent the VBT binary,
which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
version A21 of the vendor firmware. This port has not been tested.
The EC is the SMSC MEC5055, which seems to be compatible with the
existing MEC5035 code. As with the other Dell systems with this EC, this
board is assumed to be internally flashable using an EC command that
tells it to pull the FDO pin low on the next boot, which also tells the
vendor firmware to disable all write protections to the flash [1].
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I827826e9ff8a9a534c50250458b399104478e06c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Mainboard is codenamed Vida. I do not physically have this system;
someone with physical access to one sent me the output of autoport which
I then modified to produce this port. The VBT was obtained using
intelvbttool while running version A14 (latest available version) of the
vendor firmware.
Tested and found to boot as part of a libreboot build based on upstream
coreboot commit b7341da191 with additional patches, though these do not
appear to affect SNB/IVB. The base E6430 patch was tested against
coreboot main.
The EC is the SMSC MEC5055, which seems to be compatible with the
existing MEC5035 code. As with the other Dell systems with this EC, this
board is assumed to be internally flashable using an EC command that
tells it to pull the FDO pin low on the next boot, which also tells the
vendor firmware to disable all write protections to the flash [1].
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I570023b0837521b75aac6d5652c74030c06b8a4c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82131
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard is PAL70/LA-6611P. I do not physically have this system;
someone with physical access to one sent me the output of autoport which
I then modified to produce this port. I was also sent the VBT binary,
which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
version A22 of the vendor firmware. This port has not been tested.
The EC is the SMSC MEC5055, which seems to be compatible with the
existing MEC5035 code. As with the other Dell systems with this EC, this
board is assumed to be internally flashable using an EC command that
tells it to pull the FDO pin low on the next boot, which also tells the
vendor firmware to disable all write protections to the flash [1].
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I5905f8c6a8dbad56e03bdeedc2179600d0c4ba46
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82130
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make sure size vbt_size is initialized. GCC LTO warns about this.
Change-Id: I4fcc6c02f898640e9b40d769e1165a4a0fb0fdf2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84041
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
Mainboard is Krug 14". I do not physically have this system; someone
with physical access to one sent me the output of autoport which I then
modified to produce this port. I was also sent the VBT binary, which was
obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
A02 of the vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I0283653156083768e1fd451bcf539b4e028589f4
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Mainboard is PAL60/LA-6562P (UMA). The version with an Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port. I was also sent the VBT binary, which was obtained
from `/sys/kernel/debug/dri/0/i915_vbt` while running version A08 of the
vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ibdd40cc15642b8d404159d5962670ccc4167a9ec
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Based on autoport. data.vbt extracted from a running system
using "intelvbttool --inlegacy"
Like with 8200 SFF, OEM firmware write-protects itself, but not
the IFD, GBE or ME regions when FDO jumper is applied. Therefore,
ME can be shrunken with me_cleaner and BIOS region moved there.
Tested:
- Internal flashing from the latest endor BIOS (v2.33)
- Sandy Bridge Pentium G630 CPU
- RAM: 8+0, 8+4, 8+8 1866MHz DDR3
- SeaBIOS 1.16.2, metest86+ v6, coreinfo, nvramcui & tint payloads
- libgfxinit txtmode & corebootfb
- VGA, DisplayPort (DVI monitor through an adapter)
- Gigabit Ethernet
- All front and back USB ports
- Booting Void Linux
- Rebooting
- Mini-PCIe WLAN (PCIe)
- Both SATA ports: 2.5" & DVD
- PS/2 keyboard and mouse
- Fan control
- TPM settings in SeaBIOS
Untested:
- Second Mini-PCIe slot (or is it mSATA): connector not present on my unit
- MXM graphics
Not working:
S3: it sleeps for a few seconds and wakes up on its own
Change-Id: I1cba7a5e664758eba7ea2ab8a55658b307d1d173
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79583
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested to still boot, SeaBIOS -> Void Linux
Change-Id: I03d57c7e76ccdfccd58b2a6deab4dee87b02503a
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79545
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Mainboard is Krug 15". I do not physically have this system; someone
with physical access to one sent me the output of autoport which I then
modified to produce this port. I was also sent the VBT binary, which was
obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running version
A14 of the vendor firmware.
This was originally tested and found to be working as a standalone
board port in Libreboot, but this variant based port in upstream
coreboot has not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ic9bfc028d4b8ae01ccc019157bb53e7764671134
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Mainboard is PAL50/LA-6591P (UMA). The version with an Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port. I was also sent the VBT binary, which was obtained
from `/sys/kernel/debug/dri/0/i915_vbt` while running version A25 of the
vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: Ic48d9ea58172a5b13958c8afebcb19c8929c4394
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82126
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard is QXW10/LA-7902P (UMA). I do not physically have this board;
someone with physical access to one sent me the output of autoport which
I then modified to produce this port. I was also sent the VBT binary,
which was obtained from `/sys/kernel/debug/dri/0/i915_vbt` while running
version A21 of the vendor firmware.
This was originally tested and found to be working as a standalone board
port in Libreboot, but this variant based port in upstream coreboot has
not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
Change-Id: Idaf6618df70aa19d8e60b2263088737712dec5f0
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Mainboard is QALA0/LA-7761P (UMA). The version with a Nvidia dGPU was
not tested. I do not physically have this system; someone with physical
access to one sent me the output of autoport which I then modified to
produce this port.
I was also sent the vbios obtained using intel_bios_dumper while running
version A22 of the vendor firmware, which I then processed using
`intelvbttool --inoprom vbios.bin --outvbt data.vbt` to obtain data.vbt.
This was originally tested and found to be working as a standalone board
port in Libreboot, though this variant based port in upstream coreboot
has not been tested.
This can be internally flashed by sending a command to the EC, which
causes the EC to pull the FDO pin low and the firmware to skip setting
up any chipset based write protections [1]. The EC is the SMSC MEC5055,
which seems to be compatible with the existing MEC5035 code.
[1] https://gitlab.com/nic3-14159/dell-flash-unlock
Change-Id: I9fcd73416018574f8934962f92c8222d0101cb71
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Instead of using defines for command IDs and argument values, use enums
to provide more type safety. This also has the effect of moving the
command IDs to a more central location instead of defines spread out
throughout the header.
Change-Id: I788531e8b70e79541213853f177326d217235ef2
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Introduce a sandybridge-style devicetree setting for SPD addresses,
and use it instead of runtime code in mb_get_spd_map() for all
haswell boards without CONFIG(HAVE_SPD_IN_CBFS) - effectively all
boards except google/slippy.
Patch also covers recently added Z97 boards using Broadwell MRC.
Also update util/autoport to match.
abuild passes for all affected boards.
autoport builds, but otherwise untested.
Change-Id: I574aec9cb6a47c8aaf275ae06c7e1fb695534b34
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79025
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update generated FSP headers for ADL-N to MR5(5132_00)
Change-Id: I96fccbb92866fbc18c57187628612fda655cd7a7
Signed-off-by: KunYi Chen <kunyi.chen@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ia3fda208f5cb2e0d8a1e4da2c4392bc0f326d1ed
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84076
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit aa6865291a7ddfae4c67fcfc55ebd0c13a376807.
Reason for revert: We applied this patch for touchpad stuttering issue
for XOl, but the same touchpad problem was reported. So we would revert
this change and apply kernel patch (crrev/c/5808335) to avoid the
touchpad issue.
Change-Id: I78139932e76dbd4128fb325dd70b7dcff3bcc81c
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add I2C controller driver.
TEST=build pass
BUG=317009620
Change-Id: I617ad8a43ce8b492b1a0e5dc06c1f0ffe7d92b5e
Signed-off-by: ot_hao.han@mediatek.corp-partner.google.com
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83927
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add watchdog support for MT8196.
TEST=build pass and WDT uart log
BUG=b:317009620
Change-Id: I9d5e71aa27d469855c2bd65abc5309d69a018750
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
- Turn off L2C SRAM and reconfigure as L2 cache:
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
- Configure DMA buffer in DRAM:
Set DRAM DMA to be non-cacheable to load blob correctly.
TEST=build pass, register(disable_l2c) read ok
BUG=b:317009620
Change-Id: I6a3cb63d3418f085f5d8d08b282dd59ea431c294
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83925
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Refactor mmu operation by
- moving mtk_soc_disable_l2c_sram to l2c_ops.c
- keeping mtk_soc_after_dram in mmu_cmops.c
Change-Id: I14bd8a82e0b5f8f00ce2b52e5aee918e130912d4
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83937
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize SPI NOR Flash Controller (SNFC) in the bootblock.
TEST=read nor flash data successfully.
BUG=b:317009620
Change-Id: I88960ce7a50f67ea6f402884b714cb205836a6d8
Signed-off-by: Noah Shen <noah.shen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83924
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add NOR-Flash drivers for flash read/write.
TEST=read nor flash data successfully.
BUG=b:317009620
Change-Id: Id0a19f0520020f16c4cf9d62da4228a5b0371b91
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83923
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To reduce duplicate pad_func of MediaTek SoCs, move the pad_fun to a
common directory.
TEST=Build pass
BUG=b:317009620
Change-Id: I145233ef887a38251e8fc129b8357f236c5f7a2b
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Remove the weak function. Combine all the getting descriptors together.
BUG=b:279144932
TEST=Build
Change-Id: I981e9c52c8e5fa32296e2e43be47411557133691
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83646
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: Ic0e0864b99c5078e5b84b9183262b3c47ffcb329
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
When the config of MCU firmware blob such as CONFIG_SPM_FIRMWARE is
non-empty, we should always expect the file to exist. Similarly, since
the device is unlikely to boot without the DRAM blob (assuming MRC_CACHE
doesn't contain valid memory training data), dram.elf should always
exist as well.
Therefore, remove the check for the existence of the blobs. Build would
fail if any of the blobs is missing.
Change-Id: I755e7c5a70b34b0c3d3915ab339c65263688aad7
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84053
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will not succeed in compiling on all target and compiler
combinations but at least gets the ball rolling. The change is not
invasive.
Some notes:
- GCC has issues with LTO on ARM
- Clang uses LLD automatically on some arch
- Clang with LTO fails on x86 as it forwards the linking to GCC for some
reason
- SMM building succeeds but the binary is empty
Change-Id: Ieb9204777fd349542744a8946e2207731c37969c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG
for WIFI_CATEGORY to choose the right wifi_sar hex file.
Below is the file mapping:
wifi_sar_0.hex = wifi6
wifi_sar_1.hex = wifi7
BUG=b:345596420
TEST=emerge-nissa coreboot chromeos-bootimage
Cq-Depend: chrome-internal:7607427
Change-Id: If8339a2a1d32d3e885ef87ea2ec2847f107f1fbd
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84051
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify DPTF parameters from thermal team.
1. Add TCHG.
2. Modify the charging limit.
BUG=b:360066326
TEST=Modify Thermal according to design requirements
Change-Id: Ia7050b552656a70da0c992e4f54b02ccb6a7c114
Signed-off-by: Wei Hualin <weihualin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83929
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar
|
|
Add GPIO driver for other modules to control GPIO pins.
TEST=build pass
BUG=b:317009620
Change-Id: I6d1e6ef17660308c8de908697ffba6b5f17ff9ae
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83922
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To reduce duplicate gpio_base.h in each SoC folder, move gpio_base.h to
mediatek/common folder.
TEST=Build pass
BUG=b:317009620
Change-Id: I815df8a3083cf04b821165ec834ca98ee71a0c78
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
TEST=build pass
BUG=317009620
Change-Id: I5dffdb9f3e4e7e0d49209e6012893cd246948ee8
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83987
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Iccmax of VccIn_Aux is 25A with MBVR design.
BUG=b:348258637
TEST=Local build successfully and boot to OS normally.
Change-Id: I59c420c03a8f01d185f616a2212798266b4251e0
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
EE change GPP_C1 from pull-up to OD&no pull-up in PCH GPIO Table.
BUG=b:358472598
TEST=Build and verified test result by EE team
Change-Id: I84d1b42a39bebbcd610cebc46f979018fc79238f
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83904
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some targets cannot be supported by clang as clang generates slightly
larger binaries which the hardware won't accept. This is usually the
case with CONFIG_CHROMEOS.
Change-Id: I88cf8ce16fb6c61c19d615e396f5871179b06fc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69747
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN
bluetooth companion device.
BUG=b:345596420
TEST=Build and test on nivviks, check BRDS is shown in SSDT.
Change-Id: I0908ff500434401bf89a5313427cf304f32cf929
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN
bluetooth companion device.
BUG=b:345596420
TEST=Build and test on revin, check BRDS is shown in SSDT.
Change-Id: Ie8174567b863e1afe8b0a27e644e24e9d3de6d19
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84020
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The current region_end() implementation is susceptible to overflow
if the region is at the end of the addressable space. A common case
with the memory-mapped flash of x86 directly below the 32-bit limit.
Note: This patch also changes console output to inclusive limits.
IMO, to the better.
Change-Id: Ic4bd6eced638745b7e845504da74542e4220554a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
A few differences with the original link targets:
- 'libs' is now supported on all arch even though only x86 uses it
- compiler_rt is included on arch that previously did not (arm). This
however has no impact as there compiler_rt is not defined for those
arch in xcompile
- LIBGCC_FILE_NAME_bootblock is not included, but this was not defined
anywhere so this is a noop
Change-Id: I64f7686894c99732d06972e7ba327061db6d7c44
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83574
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes the boilerplate --oformat out of the makefile.mk
Change-Id: Ib78934fff4a31c4375da2038efca5027b813b07b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83999
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add the condition of unprovisioned fw_config to enable all storages
and devices. It's for first boot on all storags and preliminary test
in factory when fw_config is unprovisioned.
BUG=None
TEST=Build jubilant firmware and boot to OS on storages when fw_config
is unprovisioned and ensure all devices are enable.
Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Storage devices are very critical to boot to OS. When probe list is
defined for storage devices, all of them get disabled when fw_config is
unprovisioned - a typical situation in the factory. Fix this by
configuring the storage devices in device/override tree to probe and
enable them when fw_config is unprovisioned.
BUG=None
TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned.
Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When fw_config is unprovisioned (eg. in the factory), devices that do
not have any probe list are enabled by default and those that have probe
list are disabled. On mainboards that support multiple types of boot
critical devices (eg. storage) through probing fw_config, all of
them are disabled when fw_config is unprovisioned. Hence the devices do
not boot to OS. Add sconfig fw_config rule `probe unprovisioned` to
enable such devices when fw_config is unprovisioned.
BUG=None
TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned.
Change-Id: I178f821e077912776d654971924d67203a7c43df
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83983
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Since the voltage value measured by the USB2 pin of the wlan is 500mv,
it does not meet the design requirements. Adjusting the port length
can reduce the voltage to 450mv, which meets the expected settings.
BUG=b:361037189
TEST=1. The voltage measurements are as expected.
2. The Bluetooth and WiFi functions of the wlan module are
verified to be normal.
Change-Id: Icd1ec3b561ee5b3f55e5f97a56fd9cb7df893508
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
|
|
Enables early serial console for debugging.
TEST=build/boot drobit, verify console output available starting in
bootblock on CPU UART (/dev/ttyUSB1) vs ramstage.
Change-Id: If94eb8caca3469143433fef06b972050f886be6a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
These field defines are SOC-specific. The AUX bias virtual wire field
positons are shifted in PTL.
In MTL SOC and older:
7:0 GROUP_ID Group ID in PCH GPIO
10:8 BIT_NUM Data bit Position in PCH GPIO
23:16 VW_INDEX VW Index in PCH GPIO
In PTL SOC:
15:0 GROUP_ID Group ID in PCH GPIO; targeted SB_PORTID
18:16 BIT_NUM Data bit Position in PCH GPIO
31:24 VW_INDEX VW Index in PCH GPIO
BUG=361048817
TEST=boot to OS and use iotools to read AUX Bias Ctrl register to
verify the group ID, bit number, and vw index.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I0f9c895590465b2f539c91834cf331fcd7efa996
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83980
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
This mainboard does not have AT24RF08C (Asset Identification EEPROM) and
will show "*INVALID*" in the SMBIOS table.
Change-Id: If6f948bc4c63c7afdc8b31e1945d3c3beb99883f
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Icc5546a8073c03ce77480b634b367d10d1ad0111
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83992
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Iaa761108acbf275820ecbec9837b81bc5d64613e
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83991
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Enable Intel CrashLog diagnostic feature by default on all Google
Dedede variants.
BUG=b:354834461
TEST=Built for Google Dedede and verifed that CrashLog is enabled by
default.
Change-Id: Ib0487bd6a5bfdad2a80fd0787e009e48f4527d38
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Extend support for CrashLog to Intel Jasperlake based platforms.
This commit is based on 15cbc3b5996ae64aff2e4741c4c3ec3d7f5cc1a7,
originally reviewed on https://review.coreboot.org/c/coreboot/+/49943.
BUG=b:354834461
TEST=CrashLog can be enabled in Kconfig for Jasperlake based platforms
and can generate a BERT table, if enabled.
Change-Id: Ia18a79d8de849d556b4b8fd0e6b43090311eb23f
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Define feature check macros for MCE (machine check exception)
and MCA (machine check architecture).
Change-Id: I014c25ced1dbe21f35486f8305b1de7669e932d0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch extends the eSOL implementation on Alder Lake to render text
messages during late CSE sync (from ramstage).
Currently, the eSOL is limited to the early boot phase (until romstage)
and only displays FSP-M memory training warnings or messages during
early CSE sync (at romstage).
Platforms like Nissa/Nirul and Trulo, which use CSE sync from ramstage,
cannot display any eSOL messages, resulting in a brief black screen
during CSE firmware updates.
This patch implements the following logic to scale eSOL for late CSE
sync (at ramstage) without recompiling eSOL code for ramstage:
1. During boot, check if the MRC cache is available. This indicates the
need for memory/DRAM training and triggers an eSOL message.
2. For CSE lite SKUs (applicable to CrOS), leverage the
`is_cse_fw_update_required` API to check if the current CSE RW
firmware version differs from the CBFS metadata file version.
If so, trigger an eSOL message indicating a CSE sync is required.
3. If either condition #1 and/or #2 is true, the AP firmware renders
an eSOL text message using LibGfxInit for the Alder Lake platform.
BUG=b:359814797
TEST=eSOL text messages are displayed during CSE sync and FSP updates.
tirwen-rev3 ~ # elogtool list
0 | ... | Log area cleared | 4088
1 | ... | Early Sign of Life | MRC Early SOL Screen Shown
1 | ... | Early Sign of Life | CSE Sync Early SOL Screen Shown
2 | ... | System boot | 197
3 | ... | Memory Cache Update | Normal | Success
4 | ... | System boot | 198
5 | ... | Firmware Splash Screen | Enabled
Change-Id: I1c7d4475ed5cf6888df1beebab0641ee4203b497
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83975
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
This patch prevents the eSOL screen from being wiped out on Alder Lake
platforms that use late CSE sync (from ramstage). This allows the eSOL
text message to remain visible until ramstage.
Currently, the eSOL only functions during the early boot phase (until
romstage), so platforms like Nissa/Nirul and Trulo, which use CSE sync
from ramstage, cannot display any eSOL messages to the user.
A future patch will ensure the eSOL remains relevant for CSE sync in
ramstage, but this patch is necessary to avoid tearing down the IGD text
mode when exiting romstage.
BUG=b:359814797
TEST=eSOL text mode is not torn down when exiting romstage.
Change-Id: I81548b4057ab95ce3da0dbc69703977baf0581f1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This enables SOC_QDF_DYNAMIC_READ_PMC and adds pmc_dump_soc_qdf_info
to report_cpu_info to dump QDF information from bootblock.
Change-Id: Iaf6f46cd9be831dde345c3b3728cd66145746d68
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Saurabh Mishra <mishra.saurabh@intel.com>
|
|
This adds pmc_ipc to bootblock if SOC_INTEL_COMMON_BLOCK_PMC is enabled.
The good place to report SoC QDF can be report_cpu_info in bootblock.
QDF read is done by PMC IPC Command, so this adds pmc_ipc to bootblock
to enable calling pmc_dump_soc_qdf_info.
Change-Id: Id0391eae48fc53cd652acd09e6380ca6802eaf88
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Kinox has two VBT options, selected via fw_config. Add the second
option to CBFS, and update the original file.
Extracted from Google_Kinox.14505.704.0.bin.
TEST=build/boot kinix, verify firmware display init successful and
payload menu visible. Verify correct VBT selected via cbmem log.
Change-Id: I01c19222628fee3874ef592ec40b40d9bd679dce
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83996
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested to still boot, SeaBIOS -> Void Linux
Change-Id: Idc61e5d17f4c71fc50cf87c60a5063fc893c1d8c
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79544
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`CONFIG_DCACHE_RAM_SIZE' is not necessarily a multiple of way size. As
a result, when the `div' instruction is called to compute the needed
number of ways, there could be a remainder. When there is, one extra
way should be added to cover `CONFIG_DCACHE_RAM_SIZE'.
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83982
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 16ab9bdcd578612bb3822373547f939eb90afd82 ("soc/intel/common:
Calculate and configure SF Mask 2") breaks the computation of the
number of ways and as result, all the derived masks. It results in MSR
such as `IA32_L3_MASK_1' to be improperly programmed yielding
unpredictable NEM issues such as hangs.
Indeed, this commit has introduced a backup of 0x1 into %edx before
comparing the requested cache-as-RAM size against the way size. When
the requested cache-as-RAM is larger, it reaches the second part of
the algorithm which computes the necessary number of ways to fit the
requested cache-as-RAM.
This algorithm uses the `div' instruction. Per specification, the div
instruction divides the 64 bits combination of %edx and %eax register.
Since 0x1 got backed up in %edx and assuming a
`CONFIG_DCACHE_RAM_SIZE' of 0x200000, we end up dividing 0x100200000
by the way size instead of 0x200000 which result in a necessary number
of ways of 4098 for a way size of 0x100000.
This commit clears the %edx register before calling the `div'
instruction.
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521d
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83948
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel's PMC CrashLog size in legacy mode is expressed in DWORDs and
therefore needs to be explicitly recalculated to bytes.
BUG=None
TEST=Built and checked the size in logs
Change-Id: I2678d537439c24fbd10aa3ceffee63c9a849d28b
Signed-off-by: Jędrzej Ciupis <jciupis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
The power off code in depthcharge disables all GPEs prior to power off.
The problem is that for gpio wake sources that are locked, this power
off code cannot successfully clear any pending interrupt from that
source. This can result in the device incorrectly waking back up after
it's been powered off from the firmware dev screen.
BUG=b:360380950, b:359692570
BRANCH=None
TEST=verify brox DUT is able to power down and stay powered down when
selecting the "Power off" button in the firmware dev screen.
Change-Id: I5cd36640677996209beb8fe29f522ff8e07ebf00
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The power off code in depthcharge disables all GPEs prior to power off.
The problem is that for gpio wake sources that are locked, this power
off code cannot successfully clear any pending interrupt from that
source. This can result in the device incorrectly waking back up after
it's been powered off from the firmware dev screen.
BUG=b:360380950, b:359692570
BRANCH=None
TEST=verify rex DUT is able to power down and stay powered down when
selecting the "Power off" button in the firmware dev screen.
Change-Id: I3fdc02a82d197fd2b075e0a66c578149cef3a69f
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The power off code in depthcharge disables all GPEs prior to power off.
The problem is that for gpio wake sources that are locked, this power
off code cannot successfully clear any pending interrupt from that
source. This can result in the device incorrectly waking back up after
it's been powered off from the firmware dev screen.
BUG=b:360380950, b:359692570
BRANCH=firmware-brya-14505.B
TEST=verify brask, nissa, or brya DUT is able to power down and stay
powered down when selecting the "Power off" button in the firmware dev
screen.
Change-Id: Ic0ac73f8f29761f072d42f35e97198b56d32a9bc
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_PANTHERLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
TEST=Able to build and boot google/fatcat without any functional impact
while debugging.
Change-Id: I36bbe14d02654ed9dbda21df0d9a6a6769b87754
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83962
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_METEORLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/rex0 without any functional impact
while debugging.
Change-Id: I657d20a38e15eee333a4e45c0c600736148173d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83961
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces the SoC-specific config option
`SOC_INTEL_ALDERLAKE_DEBUG_CONSENT` with the generic
`SOC_INTEL_COMMON_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/redrix without any functional impact
while debugging.
Change-Id: I9a9c81b72d707f5ed2e1a53c139ee22be0e30068
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_TIGERLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/volteer without any functional
impact while debugging.
Change-Id: I3e96b20e7e8b3ce3c2e4884abd315a5cc55fe71d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_JASPERLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/dedede without any functional
impact while debugging.
Change-Id: I3e7abaf5fb3a0d5528041af5ce767a15fc738870
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83960
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_ELKHARTLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot intel/elkhartlake_crb without any
functional impact while debugging.
Change-Id: Idb8db7230c432792e742218d41d891c529b2114f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83959
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the SoC-specific config option
`SOC_INTEL_CANNONLAKE_DEBUG_CONSENT`.
Additionally, updates the FSP configuration to use the new generic
config option.
TEST=Able to build and boot google/hatch without any functional impact
while debugging.
Change-Id: Ifad11652b5fa6ff14f713f55a721cdbbfbfde471
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83958
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With commit 26b1a5f62b ("mb/acer/g43t-am3: Rework mainboard for variant
mechanism"), the files related to the G43T-AM3 mainboard were supposed
to be moved into its own variant directory. However, it seems it was
forgotten to delete the old ones and thus remove the duplicates.
Change-Id: I450fab074621d21e80216e4667eaf2510b0e14ad
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83985
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This board now uses merlin so it can be removed.
Change-Id: I6036695ccf80b0a7d6e6463d26e5b32aa6cb9d57
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove the ITE mirror functionality; all devices will mirror
automatically when they exit G3, and this is good enough.
Change-Id: I9b82e1b1386b4607dfe7da9b25ba432ec0303cf8
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83629
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This properly supports power_on_after_fail setting on affected
mainboards.
Tested on GA-H61M-S2PV
Change-Id: I3dcc4f032bc5f629fb916c4122beb8dc096bab20
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I15dfd5ed0541352930c3b70252b3e536ad1e6efd
Signed-off-by: Michael Strosche <michael.strosche@gmail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Previously RAM probing was necessary for our QEMU-RISCV target in order
to find the available amount of memory.
Now we get the memory from the devicetree propagated by QEMU, so there
is no reason to keep it anymore.
Tested:
Start QEMU-RISCV and cause an exception to make sure the trap handler
still works.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I9b1e0dc78fc2a66d6085fe99a71245ff46f8e63c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83873
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a generic config option, SOC_INTEL_COMMON_DEBUG_CONSENT,
to control the debug interface on Intel SoCs. This eliminates the need
for SoC-specific config options like SOC_INTEL_<SOC_NAME>_DEBUG_CONSENT.
Default values are provided for various debug types:
- 0: Disabled
- 1: Enabled (DCI OOB + [DbC])
- 2: Enabled (DCI OOB)
- 3: Enabled (USB3 DbC)
- 4: Enabled (XDP/MIPI60)
- 5: Enabled (USB2 DbC)
- 6: Enabled (2-wire DCI OOB)
- 7: Manual
Specific SoCs can override the SOC_INTEL_COMMON_DEBUG_CONSENT value
using SoC config override methods.
TEST=Able to build google/rex.
Change-Id: I84ad03f0ffe5da4bc53c665489c430fe9b65ede7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch selects the SOC_INTEL_COMMON_BASECODE option for Elkhart
Lake so that future patches can incorporate the common code debug
feature with it.
TEST=Able to build the EHL platform.
Change-Id: I71d95352fe627a7f1912f802aa971ad1ebbbead7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Adjust settings as recommended by thermal team.
Set tcc_offset value to 12 in devicetree.
BUG=b:308704811
BRANCH=firmware-rex-15709.B
TEST=emerge-ovis coreboot chromeos-bootimage
built bootleg and verified test result by thermal team
Change-Id: I0ae97bb0b2dbb2fe8f35221522506ec1f7da47f6
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83971
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:345596420
TEST=Build and test on revin, check BRDS is shown in SSDT.
Change-Id: I87cfbdd0b8a97d84a96af373855219c60f39f173
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:345596420
TEST=Build and test on nivviks, check BRDS is shown in SSDT.
Change-Id: Ib654f22033c68edbc602f14537aaa2151800598d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83943
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds SoundWire driver to support ALC722 audio codec.
The existing ALC711 codec driver is refactored to include support for
ALC722 device based on config flag.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 0 and has strap
settings configuring it for unique ID 1:
chip drivers/soundwire/alc711
register "desc" = ""Headset Codec""
device generic 0.1 on end
end
reference datasheet: Realtek ALC722-CG ver. 0.56
TEST=This driver was tested on Intel RVP with on board ALC722 codec
by booting and disassembling the runtime SSDT to ensure that the
devices have the expected address and properties. Test soundcard
binding works and devices are detected and check for audio playback
using speaker output.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ieb16a1c6f3a79321fdc35987468daa8be33b6e49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
