summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-03-15soc/intel/common: Check prerequisites for GLOBAL_RESET commandSridhar Siricilla
Check prerequisites before sending GLOBAL RESET command to CSE. TEST=Verified on hatch. Change-Id: Ia583e4033f15ec20e942202fa78e7884cf370ce4 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/common/block/cse: Modify handling of HMRFPO_ENABLE commandSridhar Siricilla
Below changes are done: 1. Allow execution of HMRFPO_ENABLE command if CSE meets below prerequisites: - Current operation mode(COM) is Normal and Curret working state(CWS) is Normal. -(or) COM is Soft Temp Disable and CWS is Normal if ME's Firmware SKU is Custom. 2. Check response status. 3. Add documentation for send_hmrfpo_enable_msg(). 4. Rename padding field of hmrfpo_enable_resp to reserved. The HMRFPO (Host ME Region Flash Protection Override) mode prevents CSE to execute SPI I/O cycles to CSE region, and unlocks the CSE region to perform updates to it. This command is only valid before EOP(End of Post). For Custom SKU, follow below procedure to place CSE in HMRFPO mode: 1. Ensure CSE boots from BP1. When CSE boots from BP1, it will have opmode Temp Disable Mode. 2. Send HMRFPO_ENABLE command to CSE. Then, CSE enters HMRFPO mode. CSE Firmware Custom SKU Image Layout: = [RO] + [RW + DATA PART] = [BP1] + [BP2 + DATA PART] Here, BP1 will have reduced functionality of BP2, and the BP1 will be CSE's RO partition and [BP2 + DATA PART] together will represent CSE's RW partition. CSE can boot from either BP1(RO) or BP2(RW). CSE Image Layout in Consumer SKU: BP2 + BP3 + DATA PART TEST=Verfied on hatch board. Change-Id: I7c87998fa105947e5ba4638a8e68625e46703448 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15nb/intel/pineview: Clean up code and commentsAngel Pons
- Reformat some lines of code - Put names to all MCHBAR registers in a separate file - Rewrite several comments - Use C-style comments for consistency - Rewrite some hex constants - Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0) - Align a bunch of things Tested with BUILD_TIMELESS=1, foxconn/d41s remains unaffected. Change-Id: I29104b0c24d66c6f49844f99d62ec433bb31bdaf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-15cpu/intel/model_2065x: Add missing CPU IDsAngel Pons
The missing CPU IDs were found on CPU-World's database: - 0x20650: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132688 - 0x20651: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132689 - 0x20652: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132690 - 0x20654: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132692 - 0x20655: http://www.cpu-world.com/cgi-bin/CPUID.pl?SIGNATURE=132693 Note that these CPUs are not Nehalem, but rather Arrandale on laptops and Clarkdale on desktops, so also update the comments accordingly. Change-Id: I285961b62b9a8ada5a1659cd9ad75f7075259664 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38943 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15treewide: Replace uses of "Nehalem"Angel Pons
The code in coreboot is actually for the Arrandale processors, which are a MCM (Multi-Chip Module) with two different dies: - Hillel: 32nm Westmere dual-core CPU - Ironlake: 45nm northbridge with integrated graphics This has nothing to do with the older, single-die Nehalem processors. Therefore, replace the references to Nehalem with the correct names. Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15nb/intel/nehalem: Rename to ironlakeAngel Pons
The code is for Arrandale CPUs, whose System Agent is Ironlake. This change simply replaces `nehalem` with `ironlake` and `NEHALEM` with `IRONLAKE`. The remaining `Nehalem` cases are handled later, as changing some of them would impact the resulting binary. Tested with BUILD_TIMELESS=1 without adding the configuration options into the binary, and packardbell/ms2290 does not change. Change-Id: I8eb96eeb5e69f49150d47793b33e87b650c64acc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15ec/google/wilco: Store LID status into LIDS and change device nameEric Lai
Store LID status into LIDS and change device name to LID0. Then Intel driver can reference it. BUG=b:151134069 TEST=check LID status by evtest Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifdac938730eac034b626aa8ad9d52462f65137ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/39497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-03-15nb/intel/i945/raminit: Use boolean type for helper variablesPaul Menzel
Change-Id: I465a68f281534cd9fc5a7bde02c32d1353cfdaed Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15nb/intel/i945/raminit: Remove space for correct alignmentPaul Menzel
Change-Id: I35d14541e0eab4474b03a9d2f114c7aa3e92918c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-15mb/asus/p8z77-m_pro: Use uppercase for *PRO*Paul Menzel
Consistently use the official uppercase spelling. Change-Id: I2e2d62389d1b965f4a391080a10e7f97fa787d14 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39350 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15lib/spd_bin: Add spaces around operatorPaul Menzel
Change-Id: Ic0571d06e94708dd5e151621ab7790f3c9f775c2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/icelake: Re-flow comment for 96 charactersPaul Menzel
Change-Id: I7a5d7bb476c33ab995136eb47ef0258b483a42ef Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/icelake: Correct past participle in commentPaul Menzel
Change-Id: I117c8d2f71824292c4ca87b6f9434d2106bb512d Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-15soc/intel/tigerlake: Match RP number with TGL EDSWonkyu Kim
Update RP number to 12 according to PCH EDS#576591 vol1 rev1.2. BUG=b:151208838 TEST=build RVP successfully Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iabdbfd99f7154741c16da53bcd9d1c7ca4f81129 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-15lib/spd_bin: Cleanup spd_get_banksEric Lai
Remove the switch case in spd_get_banks. The LPDDR4X adapt DDR4 attributes. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icfaefd1856d2350c6e5a91d233ccdb10d5259391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-15lib/spd_bin: Add LPDDR4X SPD information and DDR5, LPDDR5 IDsEric Lai
Follow JESD 21-C: DDR4 SPD Document Release 4 to add new DDR type. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I455c9e4c884ae74c72572be6dc2bd281a660e517 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-15soc/intel/tigerlake: Enable CNVi through dev_enabledSrinidhi N Kaushik
Check for dev enabled status for CNVi and update the UPD accordingly. BUG=none BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I15a03cc70f12e094badf942dd81f22bd09531051 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-15soc/intel/tigerlake: Update Cpu Ratio settingsSrinidhi N Kaushik
Add config to override CpuRatio or setting CpuRatio to allowed maximum processor non-turbo ratio. BUG=151175469 BRANCH=none TEST=Build and boot tglrvp and observe there is no extra reset in meminit. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I2fa883b443d0a4c77d62275faeacd1ed2c67a97c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39493 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15nb/intel/haswell: Tidy up code and commentsAngel Pons
- Reformat some lines of code - Put names to all used MCHBAR registers - Move MCHBAR registers into a separate file, for future expansion - Rewrite several comments - Use C-style comments for consistency - Rewrite some hex constants - Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0) Tested, it does not change the binary of Asrock B85M Pro4. Change-Id: I926289304acb834f9b13cd7902801798f8ee478a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38434 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/intel/tglrvp: Enable CNVi in devicetree for Tiger Lake UP3Srinidhi N Kaushik
Enable CNVi in devicetree and add gpio pad configs for CNVi BUG=none BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I71146960e0d53dae87946a0365dac6f224a72391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39464 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/google/hatch: Create palkia variantKane Chen
Add Palkia as a variant of Hatch. BUG=b:150254194 BRANCH=none TEST=none Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I6a303d9fc2be9ea358ad66cd648738187c974193 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38860 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/google/volteer: Use generic SPD filesNick Vaccaro
Volteer uses 4 bits (hardware straps) to indicate what memory configuration the board is populated with (i.e. which SPD file to use for the populated memory). This allows for only 16 different SPDs for supporting Volteer and all future variants of Volteer. Currently, each memory chip needs its own SPD file, so we can only support 16 different memory chip options for Volteer and all of its variants. Generic SPD files are just SPD files that have been stripped down to contain only fields that are important for the memory controller (strips out items like vendor info, for example). Using generic SPD files allows for more than 16 different memory options given it's no longer a 1-to-1 mapping as similar memory modules from different vendors can share the same generic SPD file. BUG=b:147857288 TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto and verify ripto boots to kernel and "cat /proc/meminfo" reports 8GB of memory. Change-Id: I17bd4f4a00b4e3bbaf845d6d321962c11569a186 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39423 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15soc/intel/tigerlake: Configure Vmx support using KconfigJohn Zhao
Change VmxEnable UPD value based on Kconfig ENABLE_VMX BUG=None TEST=Built image and booted to kernel. Change-Id: I725474643193223865a135813cf882fd7636d24a Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-14mb/google/dedede: Configure WLANKarthikeyan Ramasubramanian
Turn on CNVi device. Turn on PCIe Root port that hosts WLAN device. Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used for WLAN - both CNVi and M.2. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I9bb8e57cdb688bc544929c94af380b9ef1d936a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-14mb/google/dedede: Add BT Disable GPIO configurationKarthikeyan Ramasubramanian
Disable the BT module in bootblock and enable it in ramstage. This allows for loading the BT firmware during reboot. TEST=Build and boot the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0406a68ffcab2675a1aedb212cb7c8508a5b61fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/39446 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/google/drallion: Enable GEO SAREric Lai
Enable GEO SAR function. BUG=b:150347463 BRANCH=drallion TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iace9aa0245840328aa13920512747ca7f60e85dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/39467 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/intel/tglrvp: Update GPIO settingWonkyu Kim
Update GPIO reset type from PLTRST to DEEP. DEEP setting is more conservative for S3/S4/S5. Detail information is bug. BUG=b:151305120 TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie7d08560ea2ef3623bbd4734b30c80e707869c7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39476 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14ec/google/chromeec/acpi: Move ECPD under CRECPrashant Malani
Move the ECPD (GOOG0003) device under CREC (GOOG0004) so that the ECPD AP device drivers can access the parent EC device to communicate with the EC. Also, update the Notify() call to reflect the new location of the ECPD device. Signed-off-by: Prashant Malani <pmalani@chromium.org> Change-Id: I830b030c7a063506f50f9cd51df3a5018e248fc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-13mb/google/volteer: Enable Audio DSP UPDSrinidhi N Kaushik
Provide settings for configuring the link between HD-Audio controller and display unit for purposes of HDMI/DP Audio playback. BUG=b:144708516, b:148385924 TEST=none Change-Id: I225faac68729b28be65b4d8f1f83769a874f84ff Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39356 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-13mb/google/hatch/Kconfig: Disable VBOOT_EARLY_EC_SYNC on PuffEdward O'Callaghan
Early ec sync needs to be disabled for EFS2 to function. BUG=b:151115320 BRANCH=none TEST=none Change-Id: I384d072d9614a5cd30837f7cdfb777ad5e4f6b19 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-12soc/intel/tigerlake: Enable VT-d and generate DMAR ACPI tableJohn Zhao
Tigerlake platform supports Virtualization Technology for Directed I/O. Enable VT-d feature and generate DMAR ACPI table. BUG=None TEST=Booted to kernel and "dmesg | grep DMAR" to verify the DMAR ACPI remapping table existence. Retrieve /sys/firmware/acpi/tables/DMAR and "iasl -d DMAR" to check all entries. Change-Id: Ib89d0835385487735c63062a084794d9da19605e Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-12soc/intel/*/smihandler: Only compile in TCO SMI handler if neededPatrick Georgi
commit 7f9ceef disables TCO SMIs unless specifically enabled, so help the linker throw out the function that handles them in that case. Change-Id: Ia3c93b46e979fb8b99282875b188415f249d38dd Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Michael Niewöhner
2020-03-12mb/google/dedede: Enable trackpad supportPandya, Varshit B
1. Configure trackpad interrupt GPIO. 2. Set i2c0 configuration. 3. Add trackpad ACPI support. TEST= Verify trackpad working. Verify I2C SCL frequency below 400Khz on trackpad operation. Change-Id: I52c578aef591f5be90fb709bab4c8342ea9729e6 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-12mb/google/hatch: Create nightfury variantraymondchung
Create new variant and build for nightfury. BUG=b:149226871 TEST=FW_NAME="nightfury" emerge-hatch coreboot chromeos-bootimage Change-Id: If08692f4a2d216c57499098cc0e35abd708d99d4 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2020-03-12mb/google/volteer: configure L1Substate for PCIeWonkyu Kim
Limit PcieL1Substate for RP9, RP11 for ES1 NVMe warm reboot workaround. Reference: #613582 Tiger Lake PCH-LP Sightings Report issue id #1409566330 BUG=none BRANCH=none TEST= boot to OS and check warm reboot with NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie85bf71c43427e326ef2ba674da4566f8f51495a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-12soc/intel/tigerlake: Configure L1Substates for PCH Root portsWonkyu Kim
Set value for PcieRpL1Substates according to devicetree. Chip config parameter PcieRpL1Substates uses (UPD value + 1) because UPD value of 0 for PcieRpL1Substates means disabled for FSP. In order to ensure that mainboard setting does not disable L1 substates incorrectly, chip config parameter values are offset by 1 with 0 meaning use FSP UPD default. get_l1_substate_control() ensures that the right UPD value is set in fsp_params. Chip config parameter values 0: Use FSP UPD default 1: Disable L1 substates 2: Use L1.1 3: Use L1.2 (FSP UPD default) BUG=none BRANCH=none TEST=Boot up and check FSP log for PCIe config for this values Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I66743a29ad182bd49b501ae73b79270a9eb88450 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39412 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-12vboot: remove extraneous vboot_recovery_mode_memory_retrainJoel Kitching
Just call get_recovery_mode_retrain_switch() directly. BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: Icb88d6862db1782e0218276984e527638b21fd3a Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-12soc/intel/tigerlake: Enable HDA through dev_enabledSrinidhi N Kaushik
Check for dev enabled status for HDA controller and update the UPD accordingly. BUG=151174264 BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Id5dfff275ed9906852ef7eb7461fbe89a3a115c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39441 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/dedede: Add ACPI configuration for USB portsKarthikeyan Ramasubramanian
Enable USB ACPI driver. Add ACPI configuration for all the USB ports. Since one of the USB ports is used for Bluetooth configure the reset_gpio used by that port. TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3e7b8f00102c96dcc295601359d3ecfbcd1bea00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-03-11mb/intel/tglrvp: Enable Hybrid storage modeWonkyu Kim
BUG=b:148604250 BRANCH=none TEST=Build and test booting TGLRVP form NVMe and Optane Check PCIe lane configuration Show all the NVMe devices lspci -d ::0108 Show all the NVMe devices and be really verbose lspci -vvvd ::0108 Print PCIe lane capabilities and configurations for all the NVMe devices. lspci -vvvd ::0108 | grep -e x[124] Print all the PCIe information of the device ae:00.0 lspci -vvvs ae: Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5fc8fa0897ad006de9ebe20115bf3033e1e1b499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-11soc/intel/common/block/smm: add case intrusion to SMI handlerMichael Niewöhner
This adds case intrusion detection to the SMI handler. At this point one can add the code to be executed when the INTRUDER signal gets asserted (iow: when the case is opened). Examples: - issue a warning - trigger an NMI - call poweroff() - ... Tested on X11SSM-F. Change-Id: Ifad675bb09215ada760efebdcd915958febf5778 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-11mb/google/dedede: Add SPD hex file for Samsung memory partMeera Ravindranath
BUG=b:150154457 BRANCH=none TEST=Build dedede, flash and boot to kernel. Change-Id: I7248861efd1edd5a0df0e17d39a47c168cab100e Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39348 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11superio/nuvoton/nct5539d: Update documentation and remove DSDTPatrick Rudolph
There seems to be no board using this, but some currently under review. Remove the DSDT, which doesn't work together with the SSDT ACPI code generation. Also update the documentation pointing to the SSDT generator. Change-Id: I8b7daeadaaac93d74ee2fc9eb18f0eff5ef50eb3 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11drivers/intel/gma/acpi: Prevent DivideByZero errorPatrick Rudolph
In case backlight control isn't enabled BCLM is zero. Return early instead of running into a DivideByZero error. This happens on devices that don't have backlight control, like desktops and servers. The proper fix is to not include those ACPI methods, but that requires a much bigger refactoring. Change-Id: Ie9bdb00949d6d44fd99321db556d6008d2d12a7f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11soc/intel/tigerlake: Save DIMM info by available nodesJamie Ryu
TEST=Verified that dmidecode produces output identical to private repo Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: I951ea94c280b7dd5b67f320a264d13fca82a4596 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39359 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/drallion/variants/drallion: Set PCH Thermal Trip point to 77°CSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown when S0ix is enabled. BUG=None BRANCH=None TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)] value is 0xFE on Drallion. Change-Id: I146068d8019859be1c27e2a8174dfe7909d42d0a Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2020-03-11mb/google/hatch: Add LP_4G_2133 SPDraymondchung
Add LPDDR3 4GB 2133MHz SPD file. BUG=b:149226871 TEST=Build and check cbfs has the spd.bin Change-Id: I1598774a87eecc76082286540beadaa3c26eda69 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39271 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/google/volteer: Enable pcie rp11 for optaneVenkata Krishna Nimmagadda
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk related pins. Configuring pciecontroller3 to be set from 2x2. This will by done by auto detecting optane memory: enabling HybridStorageMode. BUG=b:148604250 BRANCH=chromeos TEST='Build, boot and look for two NVMe devices with lspci on Volteer' Cq-Depend: chrome-internal:2501837 Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: I5430829b496ed275e2e3bda3c0bf21c3d2132628 Reviewed-on: https://chrome-internal-review.googlesource.com/c/chromeos/third_party/coreboot-intel-private/jsl-tgl/+/2424428 Tested-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39420 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11soc/intel/tigerlake: Correct FSP log interfaceRonak Kanabar
select correct UART settings according to Kconfig DEBUG_INTERFACE_UART: Legacy UART DEBUG_INTERFACE_SERIAL_IO: PCH UART Add check for DEBUG_INTERFACE_TRACEHUB selection and set "PcdDebugInterfaceFlags" UPD accordingly. BUG=None TEST=boot jslrvp board with Debug FSP and check FSP UART log Change-Id: I7be7f93082f9c64c1c45963d70ee2e3b3d29986a Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-03-11soc/intel/tigerlake: Fix stale device pointer usageKarthikeyan Ramasubramanian
TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I43cccd32589d75a9b0c7e60f8c82b19bbe6b69a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-03-11mb/google/volteer: Disable WWAN PCIeAlex Levin
Disable WWAN PCIe to allow WWAN enumerate as USB on Volteer. BUG=b:146226689 BRANCH=none TEST=lsusb shows WWAN device Change-Id: I04e49e3ec989d20ea3469fce06051c475b0ed0c8 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-11commonlib/cbfs.c: Remove unused macroElyes HAOUAS
Change-Id: I330de4357fa48ee3d76a97a682b389ef42e7a135 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-11mb/intel/tglrvp: sync up variant folders with latest up3Wonkyu Kim
During intial UP4 patch, below UP3 patches merged which should be applied for UP4. https://review.coreboot.org/c/coreboot/+/39201 https://review.coreboot.org/c/coreboot/+/39229 Merge these patches to UP4 BUG=none BRANCH=none TEST=Build TGL UP4 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I7b24cb2b0d03309cf67c6c21ddc2031a054f6110 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
2020-03-11soc/intel/common/block: tco: enable intruder SMI if selectedMichael Niewöhner
Set TCO to issue an SMI when the case instrusion switch gets pressed. The SMI is controlled along with the general TCO SMI Kconfig. Tested on X11SSM-F. Change-Id: I3bc62c79ca3dc9e8896d9e2b9abdc14cfa46a9e7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39264 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-11mb/biostar/am1ml: Remove old reference to olivehillplusElyes HAOUAS
Change-Id: I219fb2c12bb865288364f6e48b1e3d64c14bc036 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-11mb/asus/am1i-a: Remove old reference to olivehillplusElyes HAOUAS
Change-Id: Idfb8c834ae63226546a4e2860d9b206ba0288718 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-11mb/amd/olivehillplus: Drop unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: Ie79637c992874bd06009ed9b3e9f470b44e749b7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39064 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/amd/bettong: Drop unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: I1bce09ba5041a6636f900de611846467653f35a9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11mb/amd/db-ft3b-lc: Drop unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: Ib4a95c650cc4d1cddc2ba530c12ce448a1943b34 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11mb/amd/lamar: Drop unmaintained ROMCC boardElyes HAOUAS
Remove unmaintained and unsupported old ROMCC board. This board wasn't hooked up for build. Change-Id: Iaa812dc66ddc14c24263a68e73115502ba5e2417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11intel/i945: Call fixup_i945_errata() only for mobile versionElyes HAOUAS
Per Mobile Intel ® 945 Express Chipset Family - Specification Update Document Number: 309220-013 (page 15), the power saving optimization Erratum is for Mobile Intel ® 945 Express Chipset family. So rename 'fixup_i945_errata()' to 'fixup_i945gm_errata()' and apply that function only for I945GM. Change-Id: I2656021b791061b4c22c0b252656a340de76ae5e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-11prog_loaders: Remove CONFIG_MIRROR_PAYLOAD_TO_RAM_BEFORE_LOADINGJulius Werner
This option is not used on any platform and is not user-visible. It seems that it has not been used by anyone for a long time (maybe ever). Let's get rid of it to make future CBFS / program loader development simpler. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I2fa4d6d6f7c1d7a5ba552177b45e890b70008f36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-11cbfs: Remove unused functionsJulius Werner
cbfs_boot_load_stage_by_name() and cbfs_prog_stage_section() are no longer used. Remove them to make refactoring the rest of the CBFS API easier. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ie44a9507c4a03499b06cdf82d9bf9c02a8292d5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-11mb/google/puff: Enable cros_ec_keyb deviceKangheui Won
This is required to transmit button information from EC to kernel. BUG=b:150830342 BRANCH=None TEST=firmware_ECPowerButton test passes on puff Change-Id: I10ba9d55e8997ce2412deb0613cfcaa8f24f271d Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-03-10soc/intel/common: Add more GPIO definition macrosNico Huber
Make i/o-standby state and termination configurable for GPIs. Change-Id: Id1a3c00aa8a857afa08e745b0b6a578b01fa6d47 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel/dnv: Set INT_LINE accouting for PIRQ routing & swizzlingStephen Douthit
This code also sets unused interrupt lines to the recommended safe value of 0xff instead of ignoring such devices. Change-Id: I7582b41eb3288c400a949e20402e9820f6b72434 Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel/dnv: Add ACPI _PRT methods for virtual root portsStephen Douthit
This eliminates Linux kernel warnings that look like: pcieport 0000:00:17.0: can't derive routing for PCI INT B ixgbe 0000:07:00.1: PCI INT B: no GSI - using ISA IRQ 10 Change-Id: I2029e7a8252b9e48c1df457d8da5adce7d1ac21d Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel/dnv: Fix ACPI reporting of root port interrupt routingStephen Douthit
pcie_port.asl defines an IRQM method that looks up legacy interrupt swizzling based on incoming interrupt "pin" A-D and root port number. Unfortunately the 8-bit root port number stored at offset 0x4F in the config space matches the device number, not the 1-8 scheme used in the LUT reported to the OS. Fix the case values to match the hardware. Change-Id: I103d632a4bc99461f02e05aa0f9a9eb7376770d9 Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10mb/intel/{saddlebrook,kunimitsu}: Add macro for SaGv configPraveen Hodagatta Pranesh
Change-Id: Ia31da9997ba46c15cd385bf55e009cf299848b64 Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36423 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10src: Remove unneeded 'include <arch/cache.h>'Elyes HAOUAS
Change-Id: I6374bc2d397800d574c7a0cc44079c09394a0673 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10winbond/w83667hg-a: Disable mouse controller also during resumePaul Menzel
There is no reason to not disable the controller during resume. That way, no ASL is needed. Change-Id: I282a03647ee0958abb118fafe306abe5782db71c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/22286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel/dnv: Don't clobber SATA_MAP while trying to set modeStephen Douthit
SATA Mode Select is bit 16 of the SATA General Configuration register. This code currently incorrectly pokes at the Port Clock Disable bits in the Port Mapping Register, and without clock the affected ports can't link. Change-Id: I37104f520a869bd45a32cfd271d0b893aec3c8ed Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vanessa Eusebio <vanessa.f.eusebio@intel.com> Reviewed-by: David Guckian Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10soc/intel: fix eist enablingMatt Delco
There was a bug like this for skylake that seems to have been copied to other SoCs. Signed-off-by: Matt Delco <delco@chromium.org> Change-Id: Ib4651eda46a064dfb59797ac8e1cb8c38bb8e38c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-10soc/intel/xeon-sp,mb/ocp/tiogapass: Don't fake binariesNico Huber
If we don't pretend to have binaries, there is no need to add fake ones. This also fixes building the default config. Change-Id: I8f933f24a734a9ce3d82ef57f7f234ee4dfa86e9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39383 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10lib/spd_bin: Correct LPDDR3 SPD informationEric Lai
Follow JEDEC 21-C to correct JEDEC LPDDR3 SPD information. Based on JEDEC 21-C, LPDDR3 has the same definition with LPDDR4. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I7c9361caf272ea916a3a618ee2b72a6142ffc80c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39366 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10mb/libretrend/lt1000: Add Libretrend LT1000 mainboardMichał Żygowski
Change-Id: I32fc8a7d3177ba379d04ad8b87adefcfca2b0fab Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-10mb/protectli/vault_kbl: Add FW6 supportMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I03e8e8db5d827fe113280f2a6376d364edf42870 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-10mb/intel/tglrvp: add CNVi ASL entry for dynamic SSDT generationSrinidhi N Kaushik
This change uses drivers/intel/wifi chip for CNVi device and adds dynamic SSDT entires for CNVi also export wake gpio for CNVi BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check for SSDT entries for CNVi Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Icdbffa0c29c9e0849a6a99f8592b6f35c0bb3207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39315 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10soc/intel/tigerlake: Enable Hybrid storage modeWonkyu Kim
To use Optane memory, we need to set 2x2 PCIe lane mode while we need to set 1x4 PCIe lane mode for NVMe. The mode can be selected using the FIT tool at build time. By enabling hybrid storage mode in FSP, FSP will set 2x2 PCIe lane mode if Optane memory is detected and the mode is not 2x2 and set 1x4 PCIe lane mode if Optane memory is not detected and the mode is not 1x4 during boot up. The mode is saved in SPI NOR for next boot. BUG=b:148604250 BRANCH=none TEST=Build and test booting TGLRVP from NVMe and Optane Check PCIe lane configuration. Show all the NVMe devices lspci -d ::0108 Show all the NVMe devices and be really verbose lspci -vvvd ::0108 Print PCIe lane capabilities and configurations for all the NVMe devices. lspci -vvvd ::0108 | grep -e x[124] Print all the PCIe information of the device ae:00.0 lspci -vvvs ae: Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I25bc380697b0774cc30ad1b31ad785ee18822619 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39232 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10mb/google/volteer: set TcssXhciEn to 1Brandon Breitenstein
BUG=144874778 TEST=Built with Volteer recipe and verified USB functionality Change-Id: I6cbdbd8a4f65a0fe19e3fb8d7b60b8b849f104e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09arch/arm: Use 'print("%s...", __func__)'Elyes HAOUAS
Change-Id: I83fb453344c31f2cfa97bdaf1b8791a7bef97fd7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-09mb/google/dedede: Add PCIe Root Port ConfigurationKarthikeyan Ramasubramanian
Add configuration for all the PCIe Root ports and Clock Source. Configure the Root Ports as disabled and clock sources as not used. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0a1ad7e056907e454a93f51c84e1d99f08b7bdef Reviewed-on: https://review.coreboot.org/c/coreboot/+/39166 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/dedede: Configure EDP_HPD GPIOKarthikeyan Ramasubramanian
This enables display for use by payload. TEST=Build and boot the mainboard. Ensure that the screens displayed by payload are visible. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I5fcd70623b15ae39954242605e75b2c5ce02ff14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/dedede: Configure EC <-> AP GPIOsKarthikeyan Ramasubramanian
BUG=b:150869661 TEST=Build and boot the mainboard. Trigger apreset from EC console. Trigger reboot from AP console. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0d6dd0b4264c11f7ee0ef436cc819b0bb92974f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39325 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/dedede: Add GPIO listKarthikeyan Ramasubramanian
Leave all the GPIOs in not connected state so that they can be configured depending on the use-case. This is done to park the GPIOs in a known safe state. This will also help to ensure that the required GPIOs are configured when the concerned use-cases are enabled. Below GPIOs are configured in Native Function 1 and are required for boot-up. * VCCIN_AUX_VID0 * VCCIN_AUX_VID1 * AP_SLP_S0_L * PLT_RST_L * CPU_C10_GATE_L * GPDs BUG=None TEST=Build and boot the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I5293536f66a6b08c9c2d2a6281684755a0c0b1b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39114 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/volteer: Enable FPMCU on volteerAlex Levin
BUG=b:147500717 TEST=none Change-Id: I32fa27b399127dbf8608e0556c77431d2dad652d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/volteer: change two gpio settingsNick Vaccaro
- declare the FPMCU interrupt to be level-triggered - change EC_PCH_WAKE_ODL gpio to native function mode - corrected spelling of a signal name in a comment BUG=b:144933687, b:148179954 BRANCH=none TEST=none Change-Id: I62da900d0b71139e55b52d06ec09ca25106f73cd Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/protectli/vault: Add FW2B and FW4B Braswell based boards supportMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I553fd3a89299314a855f055014ca7645100e12e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-09mb/asus/p5g41t-m_lx: Do not set BSEL GPIOs in devicetreeAngel Pons
This mainboard has the FSB BSEL straps wired to SuperIO GPIOs. They are set up in romstage, so it makes no sense to clobber the registers with garbage in ramstage. Tested, my Asus P5G41T-M LX still boots and it does not need a full reset on almost every reboot. Change-Id: I6ea498119df44243ec42e3cb5c2903de32a17373 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39384 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/asus/p5g41t-m_lx: Correct GPIO directionAngel Pons
Not all GPIO4 pins on the SuperIO are configured as outputs. Change-Id: Idf6350551a91c4c1a25a83e3fb9b1a6722a81c36 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-09mb/asus/p5qpl-am: Do not set BSEL GPIOs in devicetreeAngel Pons
This mainboard has the FSB BSEL straps wired to SuperIO GPIOs. They are set up in romstage, so it makes no sense to rewrite their values in ramstage. Tested, my Asus P5QPL-AM still boots. Change-Id: Ic47f96d12420ebcc70ab5cea940c4c09620c03ca Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-09soc/intel/braswell/chip.h: Include smbios.h for Type9 EntriesMichał Żygowski
In order to add the smbios_slot_desc for the SMBIOS Type9 entries into the devicetree, and not use numbers but strings like "SlotTypePciExpressGen3X4", smbios.h needs to be included in the static.c. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Id15fe4101d14479b02e536fdf63748a241c02bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-09drivers/ipmi: Fix buffer double-freeJacob Garber
If reading the data for the asset_tag fails, that buffer should be freed, not the one for serial_number. Change-Id: I2ecaf7fd0f23f2fb5a6aa0961c7e17fff04847f4 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1419481, 1419485 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-093rdparty/libgfxinit: Update submodule pointerNico Huber
Changes allow to use the integrated panel logic (power sequen- cing and backlight control) for more connectors. The Kconfigs GFX_GMA_PANEL_1_PORT and GFX_GMA_PANEL_2_PORT can now be set to any port, e.g. config GFX_GMA_PANEL_1_PORT default "DP3" Now that the panel logic is not tied to the `Internal` port choice anymore, we can properly split it into `LVDS` and `eDP`. This also adds Comet Lake PCI IDs which should still work the same as Kaby and Coffee Lake. Change-Id: I78b1b458ca00714dcbe7753a7beb4fb05d69986b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38921 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/intel/tglrvp: Add memory config for Tiger Lake UP4Srinidhi N Kaushik
Add LPDDR4 memory configuration for Tiger Lake UP4 platform which includes 1. DQ/DQs Mapping 2. Board id Support 3. SPD indexing BUG=none BRANCH=none TEST= Build TGL UP4 successfully Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ibbd7036919c1a91ef12049d2af657f0a3597b57e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39365 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/intel/tglrvp: Add TGL UP4 RVPWonkyu Kim
Add initial TGL UP4 RVP build enviorment BUG=none BRANCH=none TEST= Build TGL UP4 successfully Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iab7ada0746394539586e7cc159112dc8208fdd7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39363 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09vendorcode/intel/fsp/fsp2_0/tgl: Update FSP header for Tiger LakeSrinidhi N Kaushik
Update FSPS header to include HybridStorageMode Upd for Tiger Lake platform version 2457. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ib6ac89163c0f7a11910e56b9804e386f8bcf355d Reviewed-on: https://review.coreboot.org/c/coreboot/+/39364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-07mb/google/volteer: add CNVi ASL entry for dynamic SSDT generationSrinidhi N Kaushik
This change uses drivers/intel/wifi chip for CNVi device and adds dynamic SSDT entires for CNVi also export wake gpio for CNVi. BUG=none BRANCH=none TEST=Build and boot volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ia8baf1c7b770db23f31383bda46ae8d090468560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-07lib/spd_bin: Add "number" to log messageEric Lai
Correct the missing log. Should be the part number not just part. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I17ac9c6f9545d84645665d3abe1d1613baef4e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39353 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07lib/spd_bin: Extend LPDDR4 SPD informationEric Lai
Follow JEDEC 21-C to extend LPDDR4 SPD information. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I68c9782c543afab4423296fa7ac1c078db5649c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>