summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-11-02mb/system76/*: CMOS: Drop power_on_after_fail optionTim Crawford
Our boards do not boot if power_on_after_fail=Disable. Drop the option and use the default of powering on. Change-Id: Ia1857e52f838337048f79f8ca5c12d669cae321a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-02soc/amd/common/block/cpu: Add support for cbfs_cache regionRaul E Rangel
This change adds the cbfs_cache region into the x86 memlayout. The SoC or mainboard can decide how big the region should be by specifying CBFS_CACHE_SIZE. BUG=b:179699789 TEST=Build guybrush and verify cbfs_cache region wasn't added. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I268b6bc10906932ee94f795684a28cfac247a68c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-02psp_verstage: convert relative address in EFS2Kangheui Won
Addresses in AMD fw table with EFS gen2 are relative addresses, but PSP doesn't accept relative addresses in update_psp_bios_dir(). Check for EFS gen2 and convert them as needed. BUG=b:194263115 TEST=build and boot on guybrush and shuboz Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I95813beba7278480e6640599fcf7445923259361 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-02google/trogdor: Add backlight support for Parade ps8640xuxinxiong
Add backlight support in ps8640 through the AUX channel using eDP DPCD registers. BUG=b:202966352 BRANCH=trogdor TEST=verified firmware screen works on homestar rev4 Change-Id: Ief1bf56c89c8215427dcbddfc67e8bcd4c3607d2 Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-02mb/google/brya: Correct AT24 NVM address sizeVarshit B Pandya
Currently, the address size field of AT24 NVM is incorrect, and Linux v5.10 kernel logs the message below: at24 i2c-PRP0001:01: Bad "address-width" property: 14 The valid size of the AT24 NVM is 16 bits so modify the value from 0x0E to 0x10. TEST=Boot brya and check the kernel log and see "Bad address-width" error message is not shown. Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I6c1ed5334396e0ca09ea0078426a7b5039ae4e8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-02mb/google/brask: add the mkbp deviceZhuohao Lee
In order to let the ec passing the key event like recovery and power key to the OS, we need to include EC_ENABLE_MKBP_DEVICE to generate the MKBP device. BUG=b:204519353, b:204512547 BRANCH=None TEST=pressed recovery key and power button in the OS and checked the UI behavior. Change-Id: Ia1d0b9b301994ad9a0f4bf28b75ab0310a1d63a0 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-02mb/siemens/mc_ehl1: Clean up PCIe root port settings in devicetreeWerner Zeh
PCIe root ports #5 (00:1c.4) and #6 (00:1c.5) are not used on this mainboard and are not routed either, so remove them from the devicetree completely. PCIe root port #7 (00:1c.6) is connected and used. Add the missing settings for L1 substates and latency reporting to disable these features for this port as well. Change-Id: I06f59f0369ffcd958b5fe12bb3c646d37103811f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58568 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-02mb/siemens/mc_ehl1: Clean up devicetreeWerner Zeh
There are a bunch of devices in the devicetree that are disabled in FSP-S and not used on this board. Having them around in the devicetree, even if disabled, is not necessary and leads to a message in the log (left over static devices...check your devicetree). This commit cleans up devicetree.cb and removes all unused and disabled devices. Change-Id: Ia5ffb382e3524e61b8583aca801063942fe2f247 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-11-02lib: Add new argument as `ddr_type` to smbios_bus_width_to_spd_width()Subrata Banik
Add DDR5 and LPDDR5 memory type checks while calculating bus width extension (in bits). Additionally, update all caller functions of smbios_bus_width_to_spd_width() to pass `MemoryType` as argument. Update `test_smbios_bus_width_to_spd_width()` to accommodate different memory types. Create new macro to fix incorrect bus width reporting on platform with DDR5 and LPDDR5 memory. With this code changes, on DDR5 system with 2 Ch per DIMM, 32 bit primary bus width per Ch showed the Total width as: Handle 0x000F, DMI type 17, 40 bytes Memory Device Array Handle: 0x0009 Error Information Handle: Not Provided Total Width: 80 bits Data Width: 64 bits Size: 16 GB ... BUG=b:194659789 Tested=On Alder Lake DDR5 RVP, SMBIOS type 17 shows expected `Total Width`. Change-Id: I79ec64c9d522a34cb44b3f575725571823048380 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-02mb/google/zork/var/vilboz: Generate new SPD ID for new memory partsFrank Wu
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. Hynix H5ANAG6NCJR-XNC 2. Micron MT40A512M16TB-062E:R 3. ADATA 4JQA-0622AD BUG=b:199469240 BRANCH=firmware-zork-13434.B TEST=FW_NAME=vilboz emerge-zork coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I57cca403800d9731a7b689ac9773a7940e83904e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-01commonlib/region: Add rdev_readat_full helper methodRaul E Rangel
This helper method makes the code a bit cleaner. BUG=b:179699789 TEST=none Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie442217eba2e8f99de1407d61f965428b5c6f3bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/58761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-01soc/intel: Don't send CSE EOP if CSME is disabledSean Rhodes
CSE EOP will fail if the CSE is disabled (CB:52800) Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic00fdb0d97fefac977c0878d1d5893d07d4481ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/57149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-01soc/intel/braswell: Set GNVS DPTE via devicetreeAngel Pons
Introduce the `dptf_enable` devicetree setting to set the DPTE GNVS field, as newer Intel platforms do. Change-Id: I88b746c64ca57604f946eefb00a70487a2fb27c0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-11-01soc/intel/braswell/chip.h: Use `bool` typeAngel Pons
Use `bool` type where applicable. Change-Id: I4d5422c16381676738b8614e8e50737b59739921 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-11-01security/intel/txt: Get addr bits at runtimeArthur Heymans
This removes the need for a Kconfig value. Change-Id: Ia9f39aa1c7fb9a64c2e5412bac6e2600b222a635 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-11-01mb/google/dedede/var/storo: Add fw_config probe for multi audio codecZhi Li
Compatible headphone codec "Realtek ALC5682I-VD" and "ALC5682I-VS" BUG=b:202463494 BRANCH=dedede TEST=ALC5682I-VD or VS audio codec can work normally Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: Ib808ddadef1029d3f06eb2d68164243c386d4905 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-01mb/google/brya/var/brya0: add HPS as generic I2C peripheralDan Callaghan
Some brya0 units have HPS fitted and connected to PCH I2C2, rather than a user-facing camera. Because HPS uses I2C address 0x51, which may conflict with the user-facing camera EEPROM, introduce a new fw_config bit to indicate whether HPS is present. BUG=b:202784200 TEST=FW_NAME=brya0 emerge-brya coreboot chromeos-bootimage TEST=ectool cbi set 6 0x28191 4 # set bit 17 for HPS TEST=flashrom -p internal -w image-brya0.serial.bin Signed-off-by: Dan Callaghan <dcallagh@google.com> Change-Id: I322548bcfccf16ba571396bc88fd6fc03c036a4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58646 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-01vc/mediatek/mt8195: Remove unused code and commentsRyan Chuang
Remove unused code and comment to align with the latest MTK memory reference code which is from MTK internal dram driver code without upstream. version: Ib59134533ced8de09d23dd9f347c934d315166e2 TEST=boot to kernel Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I95ab3cf8809ad22a341ceb7fd53a68e13fb0420d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58635 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-01amd/lpc: Remove the weak functionZheng Bao
BUG=b:140165023 Change-Id: Idb4613dc08c8dee6c92b4dabb39c2f5c189471aa Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-01soc/intel/common/block/cse: Add get_me_fw_version functionJohnny Lin
Modify print_me_fw_version to get ME firmware version by calling it. Tested=On a not yet to be public platform, verified the function can get ME FW version successfully. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I50d472a413bcaaaa085955657bde6a0e6ec2c1db Reviewed-on: https://review.coreboot.org/c/coreboot/+/58520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-01commonlib: Add new TS for IA pre-cpu reset entitiesBora Guvendik
The idea here is to capture the various boot entities prior to IA cpu reset. BUG=b:182575295 TEST=Boot to OS, check cbmem -t output Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: If89befa362d7852a2c0743d05155a0b6c1634672 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-01mb/google/brya: Enable DRIVERS_GENESYSLOGIC_GL9755 for braskDavid Wu
Enable DRIVERS_GENESYSLOGIC_GL9755 support for brask. BUG=b:197385770 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If421e0df058b6f2b87267d5e3822940b90062f71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-01mb/google/brya/var/taeko: Add probe for MAX98357+ALC5682I_VSJoey Peng
Add probe function for the "VS" version of the audio amplifier so taeko can recgonize MAX98357 with ALC5682I_VS. BUG=b:202913837 TEST=FW_NAME=taeko emerge-brya coreboot and check taeko can recgonize MAX98357 with ALC5682I_VS Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Id4ff2003ee6a6f6f4ad98694996689e1a84092c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2021-11-01mb/google/dedede/var/kracko: Add Wifi SAR for krackoRobertChen
Add wifi sar for kracko BUG=b:194460420 TEST=emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage Change-Id: I83bca544c9f71142f95ea1137f732c182b3f29b7 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
2021-10-30soc/intel/common: Add DDR5 and LPDDR5 into the SMBIOS tableSubrata Banik
Add DDR5 and LPDDR5 memory technology into the SMBIOS Memory Type table. Change-Id: I1ec442cf0bd830db99e3636445724b6be01c5564 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-30lib: Use `smbios_bus_width_to_spd_width` for setting dimm.bus_widthSubrata Banik
Make use of `smbios_bus_width_to_spd_width()` for filling DIMM info. Additionally, ensures dimm_info_util.c file is getting compiled for romstage. TEST=dmidecode -t 17 output Total Width and Data Width as expected. Change-Id: I7fdc19fadc576dec43e12f182fe088707e6654d9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-30drivers/intel/fsp2_0: Check return type against CB_SUCCESSSubrata Banik
commit 6af980a2a (drivers/intel/fsp2_0: Allow `mp_startup_all_cpus()` to run serially) drops CB_SUCCESS check for mp_run_on_all_aps function hence, this changes bring back the required return type against CB_SUCCESS. Change-Id: I9fc81e6a7eebbf0072ea2acb36b3c33539b517a7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29mb/google/brya/var/brask: Correct the GPIO config of buzzerAlan Huang
GPP_B14 is used by buzzer and should be set to NF1 'SPKR'. BUG=b:198998974 TEST=emerge-brask coreboot depthcharge and verify if the buzzer beeps. Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: I84978af152a7117c1f3398a9b7adde161db058dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29lib/cbfs: Enable cbfs_cache for x86Raul E Rangel
The reason cbfs_cache was disabled on x86 was due to the lack of .data sections in the pre-RAM stages. By using ENV_STAGE_HAS_DATA_SECTION we enable x86 to start using the cbfs_cache. We still need to add a cbfs_cache region into the memlayout for it to be enabled. BUG=b:179699789 TEST=Build guybrush and verify cbfs_cache.size == 0. Suggested-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I74434ef9250ff059e7587147b1456aeabbee33aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/56577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-29mb/google/brya/anahera: Disable autonomous GPIO power managementWisley Chen
With cr50 fw 0.3.22 or older version, it needs to disable autonomous GPIO power management and then can update cr50 fw successfully. BUG=b:202246591 TEST=FW_NAME=anahera emerge-brya coreboot chromeos-bootimage. Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I9137b6264ee80bc9e00dfdc3ab3926bccb4bf47c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29soc/intel/alderlake: Add ACPI addition for USB4/TBT latency optimizationJohn Zhao
The PCI-SIG engineering change requirement provides the ACPI additions for firmware latency optimization. This change adds additional ACPI DSM function with both of FW_RESET_TIME and FW_D3HOT_TO_D0_TIME to the USB4/TBT topology which has the same implementation on Tiger Lake in commit I5a19118b75ed0a78b7436f2f90295c03928300d7. BUG=b:199757442 TEST= It was validated that the first connected device waits only 50ms instead of 100ms and all functions work on Alder Lake platform boards. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I0c8977c96de27ab0e554469eba658660975b8493 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29mb/google/brya/var/kano: disabled autonomous GPIO power managementDavid Wu
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or less to production that will need to disable autonomous GPIO power management and then can get H1 version by gsctool -a -f -M BUG=b:201266532 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If6783e0df1404c9a353061fb564210aa0d12896e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29mb/prodrive/hermes: Enable LTR for all PCIe portsAngel Pons
Set the `PcieRpLtrEnable` option to enable the LTR capability on all PCH PCIe root ports. TEST=Verify LTR capability enabled in `DevCap2` using `lspci -vv` Change-Id: I07ea37d178ea61d904c4f131fdea31479e899ef3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58326 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-29mb/prodrive/hermes: Map PCIe clocks to root portsAngel Pons
Map each PCIe clock source to the corresponding root port. Also, correct the CLKREQ# mapping for clock sources not associated to any CLKREQ# pin. The default `PcieClkSrcClkReq` value of 0 corresponds to CLKREQ# 0. TEST=Check that Linux sees the same PCIe devices with this commit: - All 5 onboard Ethernet NICs - BMC - Two random graphics cards in PEG0 and PEG1 slots - M.2 M NVMe SSD Change-Id: I0515877a36d42fb8858a0f0b3c0af1199a18d9af Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-29soc/intel/apollolake: Fix BUG-message when checking for XDCI deviceWerner Zeh
The current check for XDCI enabled uses a static device path to an internal PCI device at a very late point in the boot flow. At this time the devicetree has been processed and disabled devices have been already removed. If this device (00:15.1, XDCI) is disabled in devicetree this will trigger the message 'BUG: check_xdci_enable requests hidden 00:15.1' in the log. This looks weird and is wrong since it is not a bug to disable this device when it is not needed. To avoid this look up the devicetree by a tree walk instead of using a static value for the devicetree. Change-Id: If193be724299c4017e7e10142fac8db9fac44383 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-29mb/prodrive/hermes: Fix PCIe ClkSrc configurationAngel Pons
Correct the PCIe clock source configuration as per the schematics. Apparently, FSP does not turn off unused PCIe clock sources when using SPS (Server Platform Services) firmware, but it does when using CSME firmware. TEST=BMC and Ethernet NICs get detected when using CSME firmware. Change-Id: Id25a34816f512510640db95251a7a792c1eebe62 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-29drivers/intel/fsp2_0: Allow `mp_startup_all_cpus()` to run seriallySubrata Banik
As per MP service specification, EDK2 is allowed to specify the mode in which a 'func' routine should be executed on APs. `SingleThread` sets to 'true' meaning to execute the function one by one (serially) or sets to 'false' meaning to execute the function simultaneously. MP service API `StartupAllAPs` was designed to pass such options as part of function argument. But another MP service API `StartupAllCPUs` doesn't specify any such requirement. Running the `func` simultaneously on APs results in a coherency issue (hang while executing `func`) due to lack of acquiring a spin lock while accessing common data structure in multiprocessor environment. BUG=b:199246420 Change-Id: Ia95d11408f663212fd40daa9fd9b0881a07f1ce7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29Revert "mb/intel/adlrvp: Remove EC region"Bernardo Perez Priego
This reverts commit 0a1602217fd0d60c59a497cb83a23b44cf4973d9. EC region is required in order to provide unified coreboot image for Chrome and Windows SKU RVP's. Also removing EC region causes a regression for ADL-P platforms. With this patch EC region is included back into flash map. Change-Id: I0f7f2b5dd392b08e1978a3b3f3236eac0dab1f12 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-10-29mb/google/brya/var/kano: Add fw_config probe for MIPI cameraDavid Wu
Add fw_config probe for MIPI OVTI2740 camera BUG=b:194926283 TEST=FW_NAME=kano emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ic5a7cebf1f5c847c01e951a237af691e0ad6c73d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-29acpi/acpigen.c: Remove weak gpio definitionArthur Heymans
Compiletime errors > runtime errors. Change-Id: I1db0a8f01eaecf012e5444c03f8d4e2bb6e42a77 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-29soc/intel/icelake: select SOC_INTEL_COMMON_BLOCK_ACPI_GPIOArthur Heymans
The Intel icelake rvp boards actually rely on this but this failure was hidden in a runtime error instead of a compile time error, due to weakly linked functions. Change-Id: Idbbe774efa1515ce1d34ce2ce8f87953300a3312 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58662 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-28mb/google/brya/var/taeko: add HPS as generic I2C peripheralDan Callaghan
BUG=b:202784200 TEST=FW_NAME=taeko emerge-brya coreboot chromeos-bootimage Signed-off-by: Dan Callaghan <dcallagh@google.com> Change-Id: I400719d762b001811f809f9549fd030dff9928d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-28drivers/net/r8168.c: Guard against generating power resourceArthur Heymans
Not all platforms need to generate power resources, but the code does not get optimized out at build time because the devicetree gets compiled into a linked list. As this code pulls in some heavy ACPI dependencies that is even implemented with weak empty function it makes sense to optimize out this code using a Kconfig constant. This saves 1.5K in ramstage size on gigabyte/ga-945gcm-s2l. Change-Id: I82289aa7e6e82318417f3b827b86182891dfc2a6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58657 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-28mb/google/guybrush/var/nipperkin: update telemetry settingsKevin Chiu
Currently, the AMD SDLE stardust test fails with incorrect VDD/SOC scale/offset value, it needs to update the two load line slope settings for the telemetry. AGESA sends these values to the SMU, which accepts them as units of current. Proper calibration is determined by the AMD SDLE tool and the Stardust test. VDD scale: 92165 -> 73457 VDD offset: 412 -> 291 SOC scale: 30233 -> 30761 SOC offset: 457 -> 834 BUG=b:200194315 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage pass AMD SDLE/Stardust test Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: If53c173000a276a80247ccb08736280a25948939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-27mb/google/guybrush: Move EN_PWR_FP from GPIO_32 to GPIO_3Rob Barnes
EN_PWR_FP is used to enable power to the FPMCU. This frees up GPIO_32 for other uses. This move applies to all board except: * Guybrush * Nipperkin board version 1 Add callbacks for variants to override fpmcu shtudown gpio table and fpmcu disable gpio table. BUG=b:202992077 TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure fingerprint still works. Change-Id: I4501554da0fab0cb35684735e7d1da6f20e255eb Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/guybrush: Move GSC_SOC_INT_L from GPIO_3 to GPIO_85Karthikeyan Ramasubramanian
GSC_SOC_INT_L gpio is used by Google Security Chip (GSC) to interrupt SoC when the SoC is in S0 state. Hence use GPIO_85 which is in S0 domain and save the GPIO_3 in S5 domain for other use-cases. This move applies to all board except: * Guybrush * Nipperkin board version 1 Update the GPIO configuration, device tree configuration accordingly. BUG=b:202992077 TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure that the SoC <-> TPM communication is working fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I019f10f2f457ab81bcff77ce8ca609b2b40cb2ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/58638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/guybrush: Fix GPIO overrides during verstageKarthikeyan Ramasubramanian
GPIO overrides are defined for verstage. But the overrides are neither enabled nor applied during verstage. Enable the overrides and apply them during verstage. BUG=None TEST=Build and boot to OS in Guybrush. Perform suspend/stress, warm and cold reboot cycling for 10 iterations each. Ensure that all the PCIe devices are enumerated fine. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I510313bf860d8d55ec3b04a9cfdfa942373163f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27soc/intel/common/acpi: Correct IPC sub command for reading LPM requirementEthan Tsao
Modify IPC sub command to 2 from 0 for reading LPM requirement from PMC. Reference: https://github.com/otcshare/CCG-ADL-Generic-Full ClientOneSiliconPkg\Include\Register\PmcRegs.h #define V_PMC_PWRM_IPC_SUBCMD_GEN_COMM_READ 2 It is consumed in below. ClientOneSiliconPkg\IpBlock\Pmc\Library\PeiDxeSmmPmcLib\PmcLib.c Change-Id: I58509f14f1e67472adda78e65c3a2e3ee9210765 Signed-off-by: Ethan Tsao <ethan.tsao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/brya/var/gimble: disabled autonomous GPIO power managementMark Hsieh
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or less to production that will need to disable autonomous GPIO power management and then can get H1 version by gsctool -a -f -M BUG=b:200918380 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I83cc1a5d80bf23d052e83c9791ef866966a3d9b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58626 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27soc/amd/common/block/graphics: add missing GPU PCI IDsFelix Held
Since the iGPU PCI device IDs for AMD Renoir (family 17h, model 60h) and Lucienne (family 17h, model 68h) are already defined in pci_ids.h, also add them to the pci_device_ids list in the common AMD graphics support block. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1c554d21eece182ecea7b09b45b7aa8a733425d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-27mb/google/dedede/var/lantis: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204015941 TEST=run part_id_gen to generate SPD id Change-Id: I78ec575d354a5ae7c014a6050364d0a5214e4e92 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com>
2021-10-27mb/google/dedede/var/driblee: Generate new SPD ID for new memory partsFrank Wu
Add new memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: 1. K4U6E3S4AB-MGCL 2. H54G46CYRBX267 BUG=b:204023388 BRANCH=firmware-keeby-14119.B TEST=FW_NAME=driblee emerge-keeby coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I1b40e24faf8d85f32839a3d44fd936ca7ee7e09f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/guybrush: Remove WWAN_DISABLE GPIOKarthikeyan Ramasubramanian
In-band controls work to enable/disable the WWAN module. Hence WWAN_DISABLE_GPIO is not critical and can be marked as not connected. BUG=b:188415287 TEST=Build and boot to OS in Guybrush. Ensure that the WWAN module is enumerated on boot and reboot. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7fefba3de9c749971911b21ed4712e950cef5a6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-27mb/google/guybrush: Update SD_AUX_RESET_L signalKarthikeyan Ramasubramanian
On all upcoming variants and board versions of existing variants, SD_AUX_RESET_L signal moves from GPIO_69 to GPIO_5. This means all boards except: * All board versions of Guybrush * Nipperkin Board Version 1. Also in Nipperkin, LCD_PRIVACY_PCH signal moves from GPIO_5 to GPIO_18. Configure the gpios accordingly in baseboard, guybrush and nipperkin variants accordingly. Also update the DXIO port descriptor for SD PCIe engine with the corresponding AUX reset GPIO. BUG=b:202992077 TEST=Build and boot to OS in Guybrush & Nipperkin. Ensure that the SD Controller and SD Card are enumerated fine. Ensure that the enumeration is successful after a suspend/resume cycle. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: If28810747e6b4eaae2a693a98e1adc830f80bcf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/google/brya/var/kano: Disable unused PCIE root port in devicetreeDavid Wu
The baseboard enables PCIe RPs 6, 8 and 9, but kano doesn't use these. Having them enabled will occasionally cause suspend attempts to fail, therefore disable them in the overridetree. BUG=b:203389490 b:192370253 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie2b82cff6d910c961eeb56704dcbae2bdc2a8c53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/guybrush: Reconfigure GPIO_5Karthikeyan Ramasubramanian
On Guybrush, pen is stuffed and GPIO_5 is used to enable Pen power. On Nipperkin board version 1, pen is not stuffed and instead the GPIO is used to control LCD Privacy settings. On upcoming Nipperkin board versions and other variants, GPIO_5 is not used. Configure GPIO_5 accordingly. BUG=b:202992077 TEST=Build and boot to OS in Guybrush. Ensure that the configuration is retained on existing boards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I2aa2f16282b91f157701212ee27ddd2e89918767 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/siemens/chili: Drop redundant Kconfig selectAngel Pons
The `SMBIOS_PROVIDED_BY_MOBO` Kconfig option is already selected through the `SECUNET_DMI` option. So, there's no need to select both of them. Change-Id: I784df87893043a011906af8808aff27d636c7626 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58625 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-27src/lib/fmap.c: use le*toh() functions where neededKrystian Hebel
FMAP was developed with assumption about endianness of the target machine. This broke the parsing of the structure on big endian architectures. This patch converts the endianness of the fields where applicable. Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Change-Id: I8784ac29101531db757249496315f43e4008de4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-10-27mb/google/dedede/var/drawcia: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204014463 TEST=run part_id_gen to generate SPD id Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I43df98d84c6a274d6f96c8818ce6acff9337d8d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/dedede/var/haboki: Generate new SPD ID for new memory partsWisley Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Micron MT53E512M32D1NP-046 WT:B Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:204015944 TEST=run part_id_gen to generate SPD id Change-Id: Icf2f7352a4bd6a58e3e7abdcaac823b863984732 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-27mb/google/brask: Correct GPIO GPP_R6 and GPP_R7 settingDavid Wu
Correct GPIO GPP_R6 and GPP_R7 setting to NF2 (DMIC_CLK1 and DMIC_DATA1). BUG=b:197385770 TEST=emerge-brask coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia3813306f8c7b69fe5cf0e188c55256b68d329ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/58578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/brya/var/kano: Update the FIVR configurationsDavid Wu
This patch set disables the external voltage rails since kano board doesn't have V1p05 and Vnn bypass rails implemented. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot and verify it builds without error. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia1f3f4b2ada0154c716aedd521d4151124411ba3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-27mb/google/guybrush/var/nipperkin: config eSPI alert as in-bandKevin Chiu
To prevent unexpected alert from eSPI to SOC, configure this alert pin to in-band. BUG=b:199458949,b:203446084 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I18d38fe504bd9f2069b9977d5a35729691f672d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-10-27mb/google/guybrush/var/nipperkin: Add G2 GTCH7503 HID TS supportKevin Chiu
Follow up the G2 spec: G7500_Datasheet_Ver.1.2 BUG=b:203607764,b:202090378 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage TS is functional Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I98dd3095043ab537d91e81b84944779240b203ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/58564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-26intel/adlrvp: Add sub-regions to SI_ME in chromeos.fmdFurquan Shaikh
This change adds sub-regions to SI_ME in chromeos.fmd. These are required to support stitching of CSE components. BUG=b:189177538 Change-Id: Ife48aafcec43555175aad44f8b6307beeaea9184 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58592 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-26src/cpu: drop CPU_X86_CACHE_HELPER and x86_enable_cache wrapper functionFelix Held
Selecting CPU_X86_CACHE_HELPER only added the x86_enable_cache wrapper function around enable_cache which additionally wrote a POST code to port 0x80 and printed a message to the console. This function was only called during multi-processor initialization in ramstage via the init function pointer in the CPU's device operations struct and was run on all cores, so the message on the console was printed once per CPU core. This patch replaces all x86_enable_cache calls by calls to enable_cache and removes the wrapper function and the Kconfig symbol CPU_X86_CACHE_HELPER which was used to only add this when the corresponding CPUs used the x86_enable_cache wrapper function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I5866b6bf014821ff9e3a48052a5eaf69319b003a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58579 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-26cpu/x86/Kconfig.debug_cpu: drop HAVE_DISPLAY_MTRRS optionFelix Held
Since all x86 CPUs in tree have MTRR support, there is no need to guard the DISPLAY_MTRRS option with HAVE_DISPLAY_MTRRS. Also all x86 CPUs/SoCs have a display_mtrrs call at least somewhere in their code, so selecting the DISPLAY_MTRRS option will always have an effect. All SoCs that don't select RESET_VECTOR_IN_RAM have the postcar stage where it gets called. The two AMD SoCs that select RESET_VECTOR_IN_RAM use the FSP2 driver which contains plenty of display_mtrrs calls. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2894689ce58e7404d9d5a894f3c288bc4016ea19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: drop CPU_X86_LAPIC Kconfig optionFelix Held
All x86 CPUs in the coreboot tree have a local APIC, so the corresponding code can be unconditionally included in the build. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifc354fb386977b0fca4caa72c03aa77a20bc348e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/intel/quark/Kconfig: don't unselect CPU_X86_LAPICFelix Held
The Intel Quark SoC does have a LAPIC on its x86 CPU core, so we should select CPU_X86_LAPIC. This will additionally include the Makefile from cpu/x86/lapic. Since none of AP_IN_SIPI_WAIT, LEGACY_SMP_INIT and UDELAY_LAPIC gets selected, only the boot_cpu.c and lapic.c targets will be added to the build. Since SMP isn't set, adding the boot_cpu.c target won't change the resulting binary of a timeless build, since the only function inside will be removed by the compiler's pre-processor in the !SMP case. So the only thing that will change the resulting binary is the addition of the lapic.c target. From this target only the function cpu_get_lapic_addr will be used which overrides the weak implementation in acpi/acpi.c. The call in arch/x86/mpspec.c can be ignored, since GENERATE_MP_TABLE isn't selected. So this change will result in the LAPIC address in the MADT being changed from 0 to to LAPIC_DEFAULT_BASE. Since the documentation of the Quark SoC mentions that it has a LAPIC on its one x86 core, this should work. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2f163bd608f0548abb0e8de90843d2a796b8ef6c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-26mb/google/dedede/var/blipper: Add fw_config probe for multi audio codecYongkun Yu
Compatible headphone codec "Realtek ALC5682I-VD" and "ALC5682I-VS" BUG=b:197694580 BRANCH=dedede TEST=ALC5682I-VD or VS audio codec can work normally Signed-off-by: Yongkun Yu <yuyongkun@huaqin.corp-partner.google.com> Change-Id: I422f206b8f1f3705a65808041f1a1544c461b431 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-26include/device/pci_ids: move AMD device IDs below AMD vendor IDFelix Held
Half of the AMD PCI device ID definitions were below the ATI vendor ID, so move those below the AMD PCI vendor ID definition. The entries are kept in the order they were before and added before the existing AMD device ID definitions below the AMD vendor ID definition. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I34ffdc49884737541b8653bebf023a68050375d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26include/device/pci_ids: fix typo in PCI_DEVICE_ID_AMD_FE_GATE_700DFelix Held
The definitions isn't used in either spelling. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id6faea2b9c89f0bd3c164a6dc76fac5ea712d313 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-26soc/intel/alderlake: set lock offset for gpio pad communitiesNick Vaccaro
Initialize the pad_cfg_lock_offset field for the various gpio pad_community structures in the adl_communities. BUG=b:201430600 TEST='emerge-brya coreboot' and verify it compiles successfully. Change-Id: I2cd3e43a84b0140bb2aeae5de1e299db714d419b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-26soc/intel: Update api name for getting spi destination idWonkyu Kim
Update api name and comments to be more generic as spi destination id is not DMI specific. Update api name as soc_get_spi_psf_destination_id and comments. And move PSF definition from pcr_ids.h as it's not pcr id. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie338d05649d23bddae5355dc6ce8440dfb183073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2021-10-26soc/example/min86/Kconfig: don't unselect CPU_X86_LAPICFelix Held
Since all multi-core x86 CPUs need to have LAPICs, this option should be selected for soc/example/min86. TEST=The example/min86 mainboard still builds. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5aa6e850f0b4dca27309385ba889b04335fe4f0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/intel/socket_LGA775: Drop commented-out entriesFelix Held
The code for these CPU models isn't present in coreboot. These lines have been commented-out since they where added, so drop them. Change-Id: I8fc53fea4225217bc5bb70d839c280ebb64fd3a6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/intel/*/Kconfig: move selection of CPU_X86_CACHE_HELPERFelix Held
Move the selection of CPU_X86_CACHE_HELPER to the Kconfig file of the CPU models which call the x86_enable_cache function that gets added to the build by selecting this option. Change-Id: Ie75682f5d20a79fc2f3aab9b8a2c3ccf79d1ad5c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26mb/prodrive/hermes: Remove overridetreeAngel Pons
There's no need to have an overridetree with a single board variant. TEST=Compare static.c and observe only device order has changed. Change-Id: I2097e247c27d5d0c5479cb533b477cd490a4c827 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-26mb/prodrive/hermes: Reorganize per-port PCIe settingsAngel Pons
Move per-port PCIe settings inside the corresponding PCIe root port device. Also, remove several unnecessary and/or redundant comments. Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical. Change-Id: I3f64d56b3b2c592194b18ae7b7c63ef41a1e060f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-26cpu/x86: Introduce `CPU_X86_CACHE_HELPER`Felix Held
There's no need for relative paths with Kconfig options. Change-Id: Ib9b9b29a158c34a30480aaabf6d0b23819d28427 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/amd,intel/*/Makefile: don't add cpu/x86/cacheFelix Held
Some CPUs don't use the ramstage-only x86_enable_cache helper function to call enable_cache with some added port 0x80 and console output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ia44c7b150cd12d76e463903966f67d86750cbdd9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/*/Makefile: don't add cpu/x86/cacheFelix Held
No SoC uses the ramstage-only x86_enable_cache helper function to call enable_cache with some added port 0x80 and console output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I7c5039e1341fd4089078ad7ffb2fe6584a94045c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/intel/common: Add HECI Reset flow in the CSE driverSridhar Siricilla
This change is required as part of HECI Interface initialization in order to put the host and CSE into a known good state for communication. Please refer ME BIOS specification for more details. The change adds HECI interface reset flow in the CSE driver. It enables coreboot to send HECI commands before DRAM Init. BUG=b:175516533 TEST=Run 50 cold reset cycles on Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ie078beaa33c6a35ae8f5f460d4354766aa710fba Reviewed-on: https://review.coreboot.org/c/coreboot/+/55363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-26soc/intel/adl: Skip sending MBP HOB to save boot timeMAULIK V VAGHELA
MBP Hob is being generated by FSP after getting data from ME. coreboot does not consume this HOB and FSP provides an option for bootloader to skip generation of MBP HOB. This will help in saving ~14 ms of boot time. Here is the data from Brya P1 Board: Before: 955 returning from FspSiliconInit 879,432 (99,156) After: 955 returning from FspSiliconInit 1,177,513 (84,506) BUG=b:188577893 BRANCH=None TEST=No functional impact on Brya system and boot time is reduced with this patch. Change-Id: Ibb64e4d0f4ae7212defb6704b05a78e754f75cd7 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58289 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-25mb/google/guybrush/var/nipperkin: override dxio to turn off WLAN ASPM L1.2/L1.2Kevin Chiu
turn off WLAN ASPM L1.1/L1.2 as a short-term w/a for WLAN AP probe failure. BUG=b:198258604 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage AP is able to be probed by wlan module Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ic7be523626b0ff6e4b1c66ba6af13b15061ef4cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-25sc7280: Add AOP FW download supportRavi Kumar Bokka
AOP firmware support from sc7280. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Ib7027cdf78a9cdcccc8cfff7eef3cc540fb4093e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/qualcomm: Commonize AOP firmware supportRavi Kumar Bokka
Move AOP firmware support from qualcomm/sc7180 into qualcomm/common BUG=b:182963902 TEST=Validated on qualcomm sc7180 development board Change-Id: I90b0f48e15df390970e027bff2065b7a89b14cec Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/qualcomm/sc7280: define the aop symbolsRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I62044f6fcb301c0ca35c42598f998913f9b94b95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-25soc/amd/common/block/lpc/Makefile: simplify handling spi_dma.cFelix Held
Use the verstage_x86 class for the spi_dma.c target instead of using the verstage class and guarding it with !VBOOT_STARTS_BEFORE_BOOTBLOCK. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9b8cafd1ef17df8c485f6594bc0928cea88e436b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-25cpu,soc/amd/*/Makefile: don't add cpu/x86/pae a second timeFelix Held
Since cpu/x86/Makefile.inc already adds the pae sub-directory, there is no need to include it in the Makefile of a CPU or SoC, so remove it from those Makefiles. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I78368f7eb880fb64f511a2fa8c8acde222d0dca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-25soc/intel/common: Skip CSE post hook when CSE is disabledSubrata Banik
This patch fixes regression introduced by commit bee4bb5f0 (soc/intel/common/cse: Late sending EOP msg if !HECI_DISABLE_USING_SMM) FAFT test case fail when doing `firmware_DevMode` test. If CSE is already hidden then accessing CSE registers would be wrong and will receive junk, hence, return as CSE is already disabled. BUG=b:203061531 TEST=Brya system can boot to OS with recovery mode. Change-Id: I2046eb19716c397a066c2c41e1b027a256bd6cf9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-25drivers/pc80/tpm: Use '%u' as printf formatter for unsigned variablesWerner Zeh
Use %u instead of %d for printing unsigned variables. Change-Id: I0f4bf7b80dfbde0802af8ad96fd553cb75d60e6e Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25drivers/pc80/tpm: Use stopwatch for timeout-loopsWerner Zeh
There are manual timeout-loops which use a fixed value and udelay(). In all cases there is a debug printk() inside this loop which, when enabled, takes way longer than the counted microsecond delay. This leads to the result that e.g. a 1 second delay takes nearly an eternity if the debug messages are enabled due to the longer function execution time. This patch uses the stopwatch scheme for the timeout-loops which still makes sure that the timeout period is maintained while it takes longer function calls like printk() into account. In order to keep the minimum delay between two register accesses on the TPM keep the udelay(1)-call. TEST=Enable TPM debug messages on a board where the TPM hits a timeout by failure and make sure that the debug messages occur in the log just in the timeout period. It still works as expected if the debug messages are disabled. Change-Id: I8fd261c9d60a9a60509c847dbc4983bc05f41d48 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25mb/google/brya/variants/gimble: Enable Bluetooth offload supportMac Chiang
Enable CnviBtAudioOffload UPD BUG=b:199180746 TEST=emerge-byra coreboot Signed-off-by: Mac Chiang <mac.chiang@intel.com> Change-Id: Ic507b1d0f7c2f38de8d24247cd677b897a7463f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-23arch/x86: fix a wrong variable in ioapic_set_max_vectors()Iru Cai
The commit 04a40379b has a wrongly written variable, which sets an IOAPIC register to a wrong value and makes the Linux kernel unable to boot. Tested on HP EliteBook 2760p, the kernel boots after this patch. Change-Id: Ifda7bb61a431dbf9c2df2f738aa806dd6d8097b8 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-22soc/amd/cezanne,picasso/chipset.cb: drop LAPIC deviceFelix Held
After adding code to handle the case of missing the link/bus on the CPU cluster device in mp_cpu_bus_init, there's no need to have the LAPIC device in the devicetree any more. TEST=Mandolin still boots successfully. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icfc4fb61b373129f3bf4f4de09c38076a8f66733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22soc/intel/denverton_ns: use mp_cpu_bus_initFelix Held
After adding the functionality to add a bus/link on the CPU cluster device in mp_cpu_bus_init if it is missing due to no LAPIC device being present in the devicetree below the CPU cluster device, we can use mp_cpu_bus_init as init function in cpu_bus_ops and implement mp_init_cpus. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I76aebeca1b3227cfd310b6c45f506c042b35ae04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22include/device: ensure valid link/bus is passed to mp_cpu_bus_initFelix Held
When a chipset or mainboard devicetree doesn't have any LAPIC devices in its CPU cluster, not only the LAPIC device, but also the link/bus between the CPU cluster device and the LAPIC devices will be missing and the CPU cluster's dev->link_list will be NULL. This patch handles this case in the common code like commit 3c0ecd57c174b7391c66d22406effe18ce570cac (soc/intel/common/cpu: Handle non-zero BSP APIC ID in init_cpus) and commit ba936ce5db819d5ecb34e83a998b2390ecbdc4b9 (soc/intel/denverton_ns: Ensure CPU device has a valid link) already did in the common Intel SoC and the Denverton code. With this change all CPUs and SoC that use the common mp_cpu_bus_init as init function in the CPU cluster's device operations struct won't require having at least one LAPIC device in the chipset or mainboard device tree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib0d85de5cafb6390b8fbd512186899d6a815e972 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 11:38:01 +0000