summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2015-09-22coreboot: introduce commonlibAaron Durbin
2015-09-17broadwell: Switch to using common ACPI _SWS codeDuncan Laurie
2015-09-17braswell: Switch to using common ACPI _SWS codeDuncan Laurie
2015-09-17skylake: Use common ACPI _SWS codeDuncan Laurie
2015-09-17glados/kunimitsu: remove the implementation of mainboard_add_dimm_inforobbie zhang
2015-09-17kunimitsu: Enable wake-on-wifiDuncan Laurie
2015-09-17glados: Enable wake-on-wifiDuncan Laurie
2015-09-17Skylake: update C state latency and power numbersrobbie zhang
2015-09-17drivers/intel/fsp1_1: split relocation code for tool useAaron Durbin
2015-09-17drivers/intel/fsp1_1: handle UEFI endiannessAaron Durbin
2015-09-17drivers/intel/fsp1_1: prepare relocation code for sharingAaron Durbin
2015-09-17linking: Repair special treatments for non-x86 bootblocksJulius Werner
2015-09-17t210: lp0_resume: Configure unused SDMMC1/3 pads for low power leakageYen Lin
2015-09-17intel/skylake: Create "RtcLock" Silicon UPD from corebootBarnali Sarkar
2015-09-17vbnv: check alignment of nvram in advanceDaisuke Nojiri
2015-09-17kunimitsu: Remove code to set USB charge behavior on sleepDuncan Laurie
2015-09-17glados: Remove code to set USB charge behavior on sleepDuncan Laurie
2015-09-17intel/common: Add common code for filling out ACPI _SWSDuncan Laurie
2015-09-16riscv-virtual-memory: move page tables into virtual address spaceThaminda Edirisooriya
2015-09-16riscv-memlayout: fix existing memlayout issues, add sbi interfaceThaminda Edirisooriya
2015-09-16kunimitsu: Enable ALS connected to ECDuncan Laurie
2015-09-16glados: Enable ALS connected to ECDuncan Laurie
2015-09-16kunimitsu: Disable Deep S3 on kunimitsu platformSubrata Banik
2015-09-16Move final Intel chipsets with ME to intel/common/firmwareMartin Roth
2015-09-16x86: remove double link step for romstageAaron Durbin
2015-09-16AMD Merlin Falcon: update vendorcode header files to CarrizoPI 1.1.0.0WANG Siyuan
2015-09-16AMD Steppe Eagle: update vendorcode header files to MullinsPI 1.0.0.AWANG Siyuan
2015-09-15riscv-trap-handling: Add functionality, prevent stack corruptionThaminda Edirisooriya
2015-09-14qemu: initialize lapicGerd Hoffmann
2015-09-14AGESA S3 support: Fix excessive stack usageKyösti Mälkki
2015-09-11endian: fix le64toh()Aaron Durbin
2015-09-10endian: add portable endian functionsAaron Durbin
2015-09-10fsp1_1: provide binding to UEFI versionAaron Durbin
2015-09-10riscv-trap-handling: Add implementation for trap calls in riscvThaminda Edirisooriya
2015-09-10riscv-virtual-memory: Add virtual memory setupThaminda Edirisooriya
2015-09-10intel/skylake: HAVE_UART_MEMORY_MAPPED doesn't exist anymorePatrick Georgi
2015-09-10skylake: Move ACPI init to SOC instead of mainboardDuncan Laurie
2015-09-10kunimitsu: Remove functions from acpi_tables.cDuncan Laurie
2015-09-10glados: Remove functions from acpi_tables.cDuncan Laurie
2015-09-10sklrvp: Remove thermal.h and functions from acpi_tables.cDuncan Laurie
2015-09-10intel/common: Print board ID if enabledDuncan Laurie
2015-09-10kunimitsu: Clean up mainboard code to match gladosDuncan Laurie
2015-09-10kunimitsu: Select EC PD and software sync and do early initDuncan Laurie
2015-09-10kunimitsu: Select BOARD_ID_AUTO and clean up boardid codeDuncan Laurie
2015-09-10glados: Add Board ID supportDuncan Laurie
2015-09-10glados: Enable DPTFDuncan Laurie
2015-09-10glados: Misc code cleanupsDuncan Laurie
2015-09-10glados: Remove thermal.hDuncan Laurie
2015-09-10glados: Change include headers to relative pathDuncan Laurie
2015-09-10skylake: Enable DPTF based on devicetree settingDuncan Laurie
2015-09-10Skylake: Print GPIO MMIO base and pad config using gpio_debug tokenSubrata Banik
2015-09-10FSP: Pass FSP image base address to find_fspLee Leahy
2015-09-09glados: Select EC PD and call early EC initDuncan Laurie
2015-09-09samus: Use EC PD kconfig instead of manual PD rebootDuncan Laurie
2015-09-09chromeec: Add kconfig entry for EC PD supportDuncan Laurie
2015-09-09skylake: dptf: Add TSR3 thermal sensor and CPU code cleanupDuncan Laurie
2015-09-09braswell: acpi: Allow DPTF thresholds to be defined at board-levelShawn Nematbakhsh
2015-09-09intel/skylake: ACPI: Clean up formatting in and fix ASL codeDuncan Laurie
2015-09-09x86: link ramstage the same way regardless of RELOCATABLE_RAMSTAGEAaron Durbin
2015-09-09linking: add and use LDFLAGS_commonAaron Durbin
2015-09-09x86: link romstage and ramstage with 1 fileAaron Durbin
2015-09-09rmodule: use program.ld for linkingAaron Durbin
2015-09-09verstage: use common program.ld for linkingAaron Durbin
2015-09-09x86: link romstage like the other architecturesAaron Durbin
2015-09-09linking: move romstage and bootblock to use program.ldAaron Durbin
2015-09-09x86: link ramstage like the other architecturesAaron Durbin
2015-09-09linking: lay the groundwork for a unified linking approachAaron Durbin
2015-09-09x86: provide minimum alignment for romstageAaron Durbin
2015-09-09rules.h: add fall through where no ENV_<STAGE> is setAaron Durbin
2015-09-09drivers/pc80: Do not initialize PS2 keyboard by defaultAlexandru Gagniuc
2015-09-09intel/model_2065x/Kconfig: Don't use LAPIC_MONOTONIC_TIMERMartin Roth
2015-09-09x86: remove unused sections from romstage.ldAaron Durbin
2015-09-09x86: add romstage.S to bind program flow and orderingAaron Durbin
2015-09-09x86: don't create MAINBOARDDIR/romstage.inc for !ROMCC boardsAaron Durbin
2015-09-09x86: bootblock: remove linking and program flow from build systemAaron Durbin
2015-09-08cpu: fix cpu_microcode classAaron Durbin
2015-09-08rk3288: Allow board-specific APLL (CPU clock) settingsDavid Hendricks
2015-09-08skylake: igd: clean up igd.cDuncan Laurie
2015-09-08braswell: Tristate CFIO 139 and CFIO 140Ravi Sarawadi
2015-09-08drivers/pc80/tpm: Set "Found TPM" message to BIOS_INFO levelDuncan Laurie
2015-09-08veyron: Unify identical mainboardsJulius Werner
2015-09-08kunimitsu: Modify DQ/DQS mappingMike M Hsieh
2015-09-08Skylake:Set DISB inside romstage after mrc initDhaval Sharma
2015-09-08skylake: Clean up chip.hDuncan Laurie
2015-09-08kunimitsu: Clean up devicetree.cbDuncan Laurie
2015-09-08glados: Clean up devicetree.cbDuncan Laurie
2015-09-08sklrvp: Clean up devicetree.cbDuncan Laurie
2015-09-08kunimitsu: Fix incorrect comment format in devicetree.cbDuncan Laurie
2015-09-08glados: Fix incorrect comment format in devicetree.cbDuncan Laurie
2015-09-08kunimitsu: Disable unused USB portsDuncan Laurie
2015-09-08glados: Disable unused USB portsDuncan Laurie
2015-09-08skylake: Apply USB2 and USB3 port enable/disable settingsDuncan Laurie
2015-09-08skylake: Remove dead codeLee Leahy
2015-09-08skylake: refactor flash_controller codeAaron Durbin
2015-09-08skylake: move flash_controller.h to the proper placeAaron Durbin
2015-09-08skylake: fix eventlog on resume pathAaron Durbin
2015-09-08skylake: allow timer_monotonic_get() in all stagesAaron Durbin
2015-09-08skylake: ACPI: Clean up GPIO controllerDuncan Laurie
2015-09-08skylake: ACPI: Clean up and fix XHCI ACPI DeviceDuncan Laurie
2015-09-08skylake: ACPI: Remove SerialIO ACPI mode codeDuncan Laurie
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 17:03:00 +0000