Age | Commit message (Expand) | Author |
2010-09-24 | Make SB600/SB700 more similar for easier diffs (trivial). | Uwe Hermann |
2010-09-24 | Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure. | Uwe Hermann |
2010-09-22 | Here is a proposed way how to handle the SATA PHY settings on SB700. It | Rudolf Marek |
2010-09-21 | First round of i82801ax clean-ups (trivial). | Uwe Hermann |
2010-09-19 | Make ASUS P3B-F RAM init actually work by enabling SPD access. | Uwe Hermann |
2010-09-13 | Move initialization of MMCONF BAR to cache_as_ram setup phase, in order | Arne Georg Gleditsch |
2010-09-13 | Print an error and correct pci scan limits. Skip sb700 ISA DMA init if needed. | Juhana Helovuo |
2010-09-09 | Please find appended. This patch gets rid of the %gs magic altogether, | Arne Georg Gleditsch |
2010-09-08 | Code must not access the smbus registers before the RTC power well is | Kevin O'Connor |
2010-09-08 | Make timer2 the default choice for TSC initialization. | Patrick Georgi |
2010-09-07 | Remove unused ide0_enable and sata0_enable entries from SB7xx | Rudolf Marek |
2010-08-26 | CONFIG_DEBUG_RAM_SETUP and CONFIG_DEBUG_SMBUS are only available if the board / | Jens Rottmann |
2010-08-17 | Tilapila supports both dual slot and single slot. The difference should be | Wang Qing Pei |
2010-08-17 | Whatever happened here,... The DEC Tulip is a network card, no bridge of any | Stefan Reinauer |
2010-08-17 | Look for actual framebuffer size instead of hardcoding UMA | Rudolf Marek |
2010-08-17 | Feature of lane reversal of AMD RS780 is tested. | Zheng Bao |
2010-08-14 | My old mcp55 azalia fix from May 2010. Was never checked in. | Stefan Reinauer |
2010-08-04 | Remove warnings from USB debug console code. | Myles Watson |
2010-08-03 | VGA code needs to be refactored before it can be compiled conditionally. | Myles Watson |
2010-08-02 | Build VGA code conditionally to avoid errors when using SeaBIOS. | Myles Watson |
2010-08-01 | Clarify a comment on an old hack, remove the call to early_mtrr_init | Corey Osgood |
2010-08-01 | - fix SMM code relocation race | Stefan Reinauer |
2010-08-01 | Update my old, no longer active email addresses | Corey Osgood |
2010-07-28 | Let Geode GX2 use geode_post_code.h just like Geode LX | Nils Jacobs |
2010-07-26 | This patch converts the Geode GX2 boards to CAR. | Nils Jacobs |
2010-07-08 | Fix all warnings in the tree | Stefan Reinauer |
2010-07-08 | get rid of even more fam10 and k8 warnings. | Stefan Reinauer |
2010-07-07 | fix some more warnings | Stefan Reinauer |
2010-07-07 | Kill a few more warnings. | Myles Watson |
2010-07-06 | A bug fix: | Myles Watson |
2010-06-21 | This patch adds support for the Intel D810E2CB (i810e/ICH2) desktop board. Hu... | Joseph Smith |
2010-06-19 | Trivial. Cleaning up about the blank line. | Zheng Bao |
2010-06-17 | Always enable parent resources before child resources. | Myles Watson |
2010-06-09 | Same conversion as with resources from static arrays to lists, except | Myles Watson |
2010-06-09 | The interrupt controller lives at I/O 0x4d0/0x4d1. | Stefan Reinauer |
2010-06-07 | Fix some of Peter's suggestions for the Nokia IP530. | Myles Watson |
2010-06-07 | Remove the rest of cardbus_scan_bus. | Myles Watson |
2010-06-07 | This patch extends the reserved resources for the cs5536 to avoid the excluded | Myles Watson |
2010-06-05 | Fix two warnings: | Stefan Reinauer |
2010-06-04 | This patch replaces the headers of the following files: | Frank Vibrans |
2010-06-03 | The code was ported. Now it is what it should be. | Zheng Bao |
2010-05-30 | don't generate C source code file but use objcopy to include the SMM blob. | Stefan Reinauer |
2010-05-27 | fix warnings. | Stefan Reinauer |
2010-05-25 | Move CS5535 specific setup from GX2 driver to CS5535. | Stefan Reinauer |
2010-05-25 | also rename the config option. | Stefan Reinauer |
2010-05-25 | fix most usbdebug warnings and fix function names. | Stefan Reinauer |
2010-05-25 | Long ago we agreed on kicking the _direct appendix because everything in | Stefan Reinauer |
2010-05-23 | Fix bug from r5476 re CS5536 device search during GeodeLX PCI domain enable | Peter Stuge |
2010-05-22 | Add tinybootblock support for broadcom/bcm5785. | Patrick Georgi |
2010-05-21 | Use lists instead of arrays for resources in devices to reduce memory usage. | Myles Watson |
2010-05-16 | Add TI PCI 7412 support. | Stefan Reinauer |
2010-05-14 | clean up some prototypes | Stefan Reinauer |
2010-05-14 | license header fixes | Nils Jacobs |
2010-04-30 | get rid of some more warnings.. | Stefan Reinauer |
2010-04-30 | Doesn't need to be a warning. | Stefan Reinauer |
2010-04-30 | Get rid of a few more warnings. | Myles Watson |
2010-04-27 | Since some people disapprove of white space cleanups mixed in regular commits | Stefan Reinauer |
2010-04-25 | Fix the the build of r5494 on Asus A8V-E SE. The K8M890 and K8T890 | Rudolf Marek |
2010-04-25 | try to unify timing initialization across those boards that need it... | Stefan Reinauer |
2010-04-25 | Following patch changes the K8M890 VGA handling. It reverts the framebuffer size | Rudolf Marek |
2010-04-25 | no warnings days. | Stefan Reinauer |
2010-04-25 | zero warnings days | Stefan Reinauer |
2010-04-23 | Attached patch adds support for tinybootblock on VT8237* to decode whole flash | Rudolf Marek |
2010-04-23 | zero warnings days... | Stefan Reinauer |
2010-04-22 | Fix AHCI mode on i82801gx. Fixes SATA hotplug on iBASE:MB899. | Bernhard M. Wiedermann |
2010-04-22 | zero warnings days... | Stefan Reinauer |
2010-04-22 | None of the cs5536 settings in devicetree.cb were ever used and nobody noticed. | Stefan Reinauer |
2010-04-22 | fix compilation remaining geode boards | Stefan Reinauer |
2010-04-21 | * clean up all but two warnings on artecgroup dbe61 | Stefan Reinauer |
2010-04-20 | As Myles suggested a while back: Switch long time #warnings to be comments | Stefan Reinauer |
2010-04-16 | fix up sb600 and it8712f tree. | Stefan Reinauer |
2010-04-15 | remove more warnings. move ROOT_COMPLEX selection to fam10 | Stefan Reinauer |
2010-04-15 | zero warnings days... | Stefan Reinauer |
2010-04-14 | zero warning days. Move RAMTOP and RAMBASE together. | Stefan Reinauer |
2010-04-14 | Remove few more warnings and some dead code. | Myles Watson |
2010-04-14 | geeesh! And this really compiles and even runs? | Stefan Reinauer |
2010-04-14 | zero warnings days. Down to under 600 different warnings | Stefan Reinauer |
2010-04-11 | do better error reporting in i82801dx early smbus functions. | Stefan Reinauer |
2010-04-09 | fix the broken nvidia chipset boards, | Stefan Reinauer |
2010-04-09 | zero warnings days. | Stefan Reinauer |
2010-04-09 | zero warnings days. | Stefan Reinauer |
2010-04-09 | zero warning days. | Stefan Reinauer |
2010-04-09 | 1. This patch adds CAR for Intel P6 series processors. | Joseph Smith |
2010-04-07 | no warnings day | Stefan Reinauer |
2010-04-07 | clean up age old via epia target. | Stefan Reinauer |
2010-04-07 | fix epia-m700 compilation, and remove more warnings. | Stefan Reinauer |
2010-04-07 | switch some ROMCC boards back to ROMCC. | Stefan Reinauer |
2010-04-07 | "no warnings day" | Stefan Reinauer |
2010-04-07 | - unify use of SB_HT_CHAIN_UNITID_OFFSET_ONLY | Stefan Reinauer |
2010-04-06 | fix CK804 boards. | Stefan Reinauer |
2010-04-06 | No warnings day, next round. | Stefan Reinauer |
2010-04-05 | Add RS785G, looks like it works although it is RV620. | Rudolf Marek |
2010-04-03 | device_t wants device/device.h | Stefan Reinauer |
2010-04-03 | remove more warnings. | Stefan Reinauer |
2010-04-02 | remove more warnings. | Stefan Reinauer |
2010-04-02 | remove some more warnings | Stefan Reinauer |
2010-03-31 | Drop \r\n and \n\r as both print_XXX and printk now do this internally. | Stefan Reinauer |
2010-03-30 | fix some southbridge warnings (trivial) | Stefan Reinauer |
2010-03-30 | reduce warnings in MCP55 and Fam10 code | Stefan Reinauer |
2010-03-28 | drop __ROMCC__ define checks.. __PRE_RAM__ is what the code should be looking... | Stefan Reinauer |