summaryrefslogtreecommitdiff
path: root/src/southbridge/intel
AgeCommit message (Expand)Author
2013-03-22romstage: add support for vboot firmware selectionAaron Durbin
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
2013-03-21lynxpoint: Fix up handling for LynxPoint-LP chipsetsDuncan Laurie
2013-03-21lynxpoint: Change sata.c to get rid of #ifDuncan Laurie
2013-03-21lynxpoint: Fix ELOG logging of power management eventsDuncan Laurie
2013-03-21haswell/lynxpoint: Use new PCH/PM helper functionsDuncan Laurie
2013-03-21lynxpoint: Fix GPIO and PM base reservationsDuncan Laurie
2013-03-21lynxpoint: remove DEBUG_PERIODIC_SMISDuncan Laurie
2013-03-21lynxpoint: Add power management helper functionsDuncan Laurie
2013-03-21lynxpoint: Add helper functions for reading PM and GPIO baseDuncan Laurie
2013-03-21lynxpoint: Add function for checking for LP chipsetDuncan Laurie
2013-03-21lynxpoint: Enable EC IO ports 0x62/0x66Duncan Laurie
2013-03-21lynxpoint: update MBP give up routineAaron Durbin
2013-03-21LynxPoint: Move RCBA helper function to its own fileDuncan Laurie
2013-03-19lynxpoint: Add cbfs_load_payload() implementationAaron Durbin
2013-03-19bd82x6x: Fix compiling with USB debug port supportRonald G. Minnich
2013-03-18lynxpoint: Move a bit of generic RCBA into early_pchDuncan Laurie
2013-03-18haswell: Use SMM ModulesAaron Durbin
2013-03-17Intel HD Audio: clean up initialization codeStefan Reinauer
2013-03-17haswell platforms: restructure romstage mainAaron Durbin
2013-03-17bd82x6x: Add config option to force SATA link to different speeds.Shawn Nematbakhsh
2013-03-17Pantherpoint: Add XHCI device initDuncan Laurie
2013-03-17bd82x6x: don't use absolute symbolsAaron Durbin
2013-03-17Add bd82x6x XHCI(USB3) S3/S4 workaroundMarc Jones
2013-03-17Add bd82x6x PCH functions to SMMMarc Jones
2013-03-17lynxpoint: Add support for disabling ULT devicesDuncan Laurie
2013-03-14lynxpoint: lpc resource reservationsAaron Durbin
2013-03-14haswell: more ULT/LP support and minor tweaksDuncan Laurie
2013-03-14lynxpoint: Update device IDs and clock gating setupDuncan Laurie
2013-03-14lynxpoint: Add new GPIO interface for Lynxpoint-LPDuncan Laurie
2013-03-14lynxpoint: Add Kconfig entry for Low Power chipsetDuncan Laurie
2013-03-14lynxpoint: ME to BIOS Payload UpdatesAaron Durbin
2013-03-14lynx point: add new ME status informationAaron Durbin
2013-03-14haswell: remove GPIO60 memory reset gate on S3 transitionDuncan Laurie
2013-03-14haswell: remove explicit pcie config accessesAaron Durbin
2013-03-14lynxpoint: PMIR register renameAaron Durbin
2013-03-14lynxpoint: Management Engine UpdatesAaron Durbin
2013-03-14haswell: add PCI id supportAaron Durbin
2013-03-14lynxpoint: Update IOBP programming methodDuncan Laurie
2013-03-14haswell: Add initial support for Haswell platformsAaron Durbin
2013-03-09Add Intel Panther Point USB3 initializationMarc Jones
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
2013-02-28Use defines for some i82801ex/gx registersKyösti Mälkki
2013-02-27smm: Update rev 0x30101 SMM revision save stateAaron Durbin
2013-02-26Unify setting 82801a/b/c/d IOAPIC IDKyösti Mälkki
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
2013-02-11spi.h: Rename the spi.h to spi-generic.hZheng Bao
2012-11-27Drop driver-y from GM45/ICH9/RK9Stefan Reinauer
2012-11-27Get rid of drivers classPatrick Georgi
2012-11-27intel/i82801ix: new southbridge, ICH9Patrick Georgi
2012-11-16Drop Kconfig variable BOARD_HAS_HARD_RESETStefan Reinauer
2012-11-14Move HAVE_SMI_HANDLER from mainboards to chipsetsStefan Reinauer
2012-11-14SMM: Fix save state searching for GSMIDuncan Laurie
2012-11-14SMM: Pass the ACPI GNVS pointer via state save mapDuncan Laurie
2012-11-14SMM: Avoid use of global variables in SMI handlerDuncan Laurie
2012-11-14SMM: Extract function for finding save state nodeDuncan Laurie
2012-11-13Add Kconfig option to lock/unlock ME firmware during buildStefan Reinauer
2012-11-13SandyBridge/IvyBridge: Add IFD and ME firmware automaticallyStefan Reinauer
2012-11-12SPI: Add early romstage SPI driver using hardware sequencingDuncan Laurie
2012-11-12SPI: Fix and enable Fast Read supportDuncan Laurie
2012-11-12Add bd82x6x mainboards ASPM overrides.Marc Jones
2012-11-12SPI: Configure Software Sequence SPI Freq to match descriptorDuncan Laurie
2012-11-12SPI: Add Fast Read to the OPMENU for locked down SPIDuncan Laurie
2012-11-12Define post codes for OS boot and resumeDuncan Laurie
2012-11-12Pass correct sleep type to mainboard sleep handlerStefan Reinauer
2012-11-09PCH: Add register descriptions used by IGD OpRegionStefan Reinauer
2012-11-09Add IGD Opregion variables to NVSStefan Reinauer
2012-11-09SPI: re-init SMM SPI driver after lockdownDuncan Laurie
2012-11-08smi: make tseg_relocate check pointer offsetDuncan Laurie
2012-11-08elog: add extended management engine eventDuncan Laurie
2012-11-08spi: fix erase in SMM while SPIBAR is lockedDuncan Laurie
2012-11-07ELOG: Don't disable SPI controller lockdownDuncan Laurie
2012-11-07SPI: opmenu special case for WREN as atomic prefixDuncan Laurie
2012-11-07SMI: Change order of SMI_EN and PM1_EN initDuncan Laurie
2012-10-08hpet: common ACPI generationPatrick Georgi
2012-10-07Remove chip.h files without config structureKyösti Mälkki
2012-08-22Auto-declare chip_operationsKyösti Mälkki
2012-08-07Sandy/Ivy Bridge and Cougar/Panther Point: Fix namesStefan Reinauer
2012-08-07bd82x6x: Add beep commandsDylan Reid
2012-08-04Perform additional programming requirements for SATAStefan Reinauer
2012-07-30bd82x6x: Fix CONFIG_USBDEBUGSven Schnelle
2012-07-26Refactor driver structsPatrick Georgi
2012-07-26bd82x6x: Use CMOS variable if available for power-on on power failureStefan Reinauer
2012-07-26Log event for abnormal management engine statusDuncan Laurie
2012-07-26NVS: Add a temp sensor ID and an ACPI Method to set itDuncan Laurie
2012-07-26ME: Move ME v8 lockdown to finalize stepDuncan Laurie
2012-07-26Reserve bd82x6x LPC decode ranges in the resource allocatorMarc Jones
2012-07-26ELOG: Log run-time SMI southbridge eventsDuncan Laurie
2012-07-26SATA: Add option to configure gen3 transmitterDuncan Laurie
2012-07-26ELOG: Support GSMI in CPT/PPT southbridge SMI handlerDuncan Laurie
2012-07-25SMM: Skip locking SPI registers in finalize stepDuncan Laurie
2012-07-25ELOG: Log boot-time events found in southbridgeDuncan Laurie
2012-07-25SMM: rename tseg_fixup to tseg_relocate and exportDuncan Laurie
2012-07-25CougarPoint/PantherPoint: Add HM77 device ID to tableKimarie Hoot
2012-07-25bd82x6x: Drop unneeded pci_dev_tStefan Reinauer
2012-07-24CPU: Set flex ratio to nominal TDP ratio in bootblockDuncan Laurie
2012-07-24SMM: Fix state save map for sandybridge and TSEGDuncan Laurie
2012-07-24SMM: Add option for SPI driver to be available in SMMDuncan Laurie
2012-07-24Fix automatic ME detection in finalizeStefan Reinauer
2012-07-24Cougar/Panther Point: Compile in ME7 and ME8 code at the same timeStefan Reinauer
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 10:13:31 +0000