| Age | Commit message (Collapse) | Author |
|---|
|
When enable_gpio is used as active low output, the _STA returns
incorrect value.
Also, simply the logic for _STA method.
When enable pin is used for _STA:
| polarity | tx value| get_tx_gpio() | State |
| active high | 0 | 0 | 0 |
| active high | 1 | 1(active) | 1 |
| active low | 0 | 1(active) | 1 |
| active low | 1 | 0 | 0 |
When reset pin is used for _STA:
| polarity | tx value| get_tx_gpio() | State |
| active high | 0 | 0 | 1 |
| active high | 1 | 1(active) | 0 |
| active low | 0 | 1(active) | 0 |
| active low | 1 | 0 | 1 |
Generated _STA method:
Ex: for using active low power enable GPIO pin GPPC_H17:
Method (_STA, 0, NotSerialized) // _STA: Status
{
Local0 = \_SB.PCI0.GTXS (0x5C)
Local0 ^= One
Return (Local0)
}
TEST=Check the SSDT when booted to OS.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ie6f1e7a5b3e9fd0ea00e1e5b54058a14c6e9e09e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72421
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For Carrizo, the soc name was set as UNKNOWN.
The change is supposed to be binary unmodified, except the SPI
settings. According to the spec, the Stoneyridge and Carrizo have the
same definition of SPI setting in EFS.
Change-Id: I9704a44773b2f541f650451ed883a51e2939e12a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Found by linter
Change-Id: I7a49cce0b56cf83d0e4490733f9190284a314c4a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
"break" is useless after "return".
Change-Id: I84bc506a3d50e937797f42659299bf90ce392e09
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Also remove unnecessary whitespace before "\n"
Change-Id: Ia2c8fcb82658ed3e247759535d3112270d46e65d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The AMD SimNow tool supports fast logging through an IO port. Add a new
console to support SimNow logging through port 80.
TEST=observe significant speed improvements on SimNow console log
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I42a431f48ea14ba4adacbd4a32e15abe7c5e4951
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For Geralt, we use BOE_TV110C9M_LL0 as MIPI firmware display, so add the
power-on sequence for BOE_TV110C9M_LL0.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: I3ef0b2e26d8cc0dc35c2985363ee4c3557dac8a9
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72749
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The regulator MT6359P is needed by both firmware display and SD card.
To avoid duplicate initialization in ramstage, publicize init_pmif_arb()
as mt6359p_init_pmif_arb() and call it from mainboard_init(). This would
save 13 ms for boot time on Geralt.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: I29498d186ba5665ae20e84985174fc10f8d4accd
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72839
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch removes hybrid_storage_mode variable from
soc_intel_meteorlake_config struct since hybrid storage is no longer
supported on Meteor Lake platform.
TEST=Verify the build for Rex board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I40ec3775b827ab6e1ebd4778c6c8e13eac1944e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit d6e04aa00bc5a8912a041a569eb57f6962d1119a.
Reason for revert: Breaks master.
Change-Id: If7daeaaffe3f9ae9f5e2fbecef5817b9b62827d3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72917
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Add NO_S0IX_SUPPORT for boards that do not support, or do not want
to support S0IX.
As all the boards in the tree that do this, don't support D3Cold,
add D3COLD_SUPPORT that defaults to `n` when NO_S0IX_SUPPORT is
selected to disable D3Cold support.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I04abc7efe2db06ae6daba9e09835441b62ee44f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Use common sdhci driver in coreboot to initialize eMMC for sc7280.
This should allow us to initialize eMMC earlier in the boot process,
taking it out of the critical path.
BUG=b:254092907
BRANCH=None
TEST=emerge-herobrine coreboot chromeos-bootimage
Change-Id: Ifa88da500e82b44d7523f2e68763e01399c89f4d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71829
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Porting from depthcharge changes for supporting eMMC driver
functionality with standard SDHC controller on Qualcomm chipsets.
sdhci_msm_init() needs to be run before the standard
sdhci_mem_controller initiailzation.
BUG=b:254092907
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I6f4fd1360af1082b335f9cc3046871ce9963b5d0
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72634
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Port over the remaining AMD SoCs to use CPUID_FROM_FMS. The Glinda CPUID
still needs to be updated to the actual CPUID, but for now just change
it to use CPUID_FROM_FMS.
TEST=Resulting image of timeless build for Gardenia (Stoneyridge),
Majolica (Cezanne), Chausie (Mendocino), Mayan (Phoenix) and Birman
(Glinda) don't change.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia508f857d06f3c15e3ac9f813302471348ce3d89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72862
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement a get_soc_type function to determine if the silicon the code
is running on is Phoenix or Phoenix 2. This will for example be needed
to provide the correct DXIO descriptor table for the SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f2b668b83432426b04e7f1354b694ddd6c300d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72861
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that there is a cpuid_match function, we can use it instead of doing
basically the same thing manually. In the functions is_fam17_1x and
is_fam17_2x both the stepping number and the lower nibble of the model
number are masked out. To avoid having magic constants in the code,
introduce the CPUID_ALL_STEPPINGS_AND_BASE_MODELS_MASK definition.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I758f9564c08c62c747cc4f93a8d6b540a1834a62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72860
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To provide power to MIPI panel BOE_TV110C9M_LL0, add support for
regulator VM18.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: Ib8c3b2df1157b23b37492b1e9b1716903ea67799
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72747
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable is already a boolean, so the !! is not needed.
BUG=None
TEST=build pass.
Change-Id: I25a7cec632f21a258b8364c82e25b59e55ab7453
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72869
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
TEST=Resulting image of timeless build for Mandolin doesn't change.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44cb7759206e9e1ce79fd57f62b9a844e52f7394
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72857
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all family
15h model 60h and 70h steppings.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id05f849d59c04efa9f38dd66892f3cb99d94e3ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72855
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are multiple Phoenix steppings, but that is now covered by using
CPUID_ALL_STEPPINGS_MASK.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4eb3502dec5ebdfdbba263b15b34621952d0554
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72853
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Glinda
steppings once GLINDA_A0_CPUID is updated.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic9b8cbb2dc925a8258db6a4eb0d1b00b2745637f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72852
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all
Phoenix 2 steppings that might be available in the future. Right now it
shouldn't change any behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If9878b4687360250cac4cfe1409d5dbad7147cf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72851
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all
Mendocino steppings that might be available in the future. Right now it
shouldn't change any behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77ea8c6162667e0a318176e62078b1f57726c10c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72850
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Cezanne
steppings. This adds support for Cezanne stepping A1 and possible future
steppings.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb020052685d9369109f391797fdd8f8790a91d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72849
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CPUID_ALL_STEPPINGS_MASK to only need one CPU device ID table entry
per family & model combination and not one per stepping.
TEST=Mandolin with a Picasso APU with PICASSO_B1_CPUID (0x00810f81)
still finished mpinit and boots successfully even though now only
PICASSO_B0_CPUID (0x00810f80) with CPUID_ALL_STEPPINGS_MASK specified as
device match mask. When commenting out the line with PICASSO_B0_CPUID
as a negative test, mpinit fails as expected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I00ba43834ad86ecffa09d60599b17d122acd0b99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72848
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Instead of always doing exact matches between the CPUID read in
identify_cpu and the device entries of the CPU device ID table,
offer the possibility to use a bit mask in the CPUID matching. This
allows covering all steppings of a CPU family/model with one entry and
avoids that case of a missing new stepping causing the CPUs not being
properly initialized.
Some of the CPU device ID tables can now be deduplicated using the
CPUID_ALL_STEPPINGS_MASK define, but that's outside of the scope of this
patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0540b514ca42591c0d3468307a82b5612585f614
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72847
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Both Alder Lake and Tiger Lake have Kconfig options for S3, which
disables support for D3Cold. Unify these so that they are easier
to compare.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6eaba99e5483053a91ca20df2b7788edac5d65b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72798
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since all SoCs define the df_mmio_control union for the bits used in the
code, data_fabric_print_mmio_conf can take advantage of that and also
print a decoded version of those bits.
Output on Mandolin before the patch:
=== Data Fabric MMIO configuration registers ===
idx control base limit
0 93 fc000000 febfffff
1 93 10000000000 ffffffffffff
2 93 d0000000 f7ffffff
3 1093 fed00000 fedfffff
4 90 0 ffff
5 90 0 ffff
6 90 0 ffff
7 90 0 ffff
Output on Mandolin with the patch:
=== Data Fabric MMIO configuration registers ===
idx base limit control R W NP F-ID
0 fc000000 febfffff 93 x x 9
1 10000000000 ffffffffffff 93 x x 9
2 d0000000 f7ffffff 93 x x 9
3 fed00000 fedfffff 1093 x x x 9
4 0 ffff 90 9
5 0 ffff 90 9
6 0 ffff 90 9
7 0 ffff 90 9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06e1d3a3e9abd664f59f2bb852394e7f723f2b30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
In contrast to Mendocino and all other AMD SoCs in the coreboot tree,
Rembrandt, on which Mendocino is based on, has a DF_MMIO_REG_SET_SIZE of
3 instead of 4, so the next data fabric MMIO register is 3 DWORDs after
the last one instead of the 4 DWORDs on the other SoCs. This was checked
against PPR #56558 Rev 3.04.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I454ad5d182f0040db93c9b3a83941333392c6061
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
To be able to handle a special case, add a per-SoC define for
DF_MMIO_REG_SET_SIZE instead of having this hard-coded as 4 in the
DF_MMIO_* macros. To avoid some duplication, also introduce the
DF_MMIO_REG_OFFSET macro.
TEST=Output from data_fabric_print_mmio_conf doesn't change on Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67420a2973c8ef9a7f0ce19ddc0013de69731689
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Since the MMIO decode range registers in the data fabric are part of the
data fabric and not of the northbridge, replace the NB prefix with a DF
prefix to make this a bit clearer.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ife5e4581752825e9224b50252955d485a067af74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This should make it a bit clearer that those registers are in the data
fabric configuration registers. Also move those defines right after the
register definition those are related to.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic107bd217f4af0a9ddfbe41aafd3c882aa968e22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
CPUID 0x00a70f80 is Phoenix 2 and not Phoenix, so update the define name
to match.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie7500130d5470fdd824980b81746f3a0f6d277d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72843
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Since things are done a bit differently on Stoneyridge, it's probably
safer to run a test instead of assuming that the test on Picasso was
sufficient to be reasonably sure that this will also work as expected on
Stoneyridge.
TEST=No change of ACPI-related messages in dmesg with this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I432752fae8be08d3cbd7d30215b350c4528c7206
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I85fc5dabf10c6df7f11fd1defe8a39afc9f95325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72797
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of just printing the register contents, normalize the contents
of the base and limit registers to actual MMIO addresses and then print
those. This will hopefully avoid some confusion caused by the shifted
addresses.
Output on Mandolin before the patch:
=== Data Fabric MMIO configuration registers ===
Addresses are shifted to the right by 16 bits.
idx control base limit
0 93 fc00 febf
1 93 1000000 ffffffff
2 93 d000 f7ff
3 1093 fed0 fedf
4 90 0 0
5 90 0 0
6 90 0 0
7 90 0 0
Output on Mandolin after the patch:
=== Data Fabric MMIO configuration registers ===
idx control base limit
0 93 fc000000 febfffff
1 93 10000000000 ffffffffffff
2 93 d0000000 f7ffffff
3 1093 fed00000 fedfffff
4 90 0 ffff
5 90 0 ffff
6 90 0 ffff
7 90 0 ffff
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I62eeb88ddac6a7a421fccc8e433523459117976a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This moves the definition for POST_BOOTBLOCK_CAR from the intel-specific
postcodes into the common postcode list, and uses it for the
cache-as-RAM init as needed.
Because POST_BOOTBLOCK_CAR was set to 0x20 in some spots and 0x21 in
most of the others, the values were consolidated into 0x21. This will
change the value on some platforms.
Any conflicts should get sorted out later in the conversion process.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8527334e679a23006b77a5645f919aea76dd4926
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Found-by: linter
Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Glinda SoC, remove it form the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I627d05c09d9637caf15e17285dd2c8e0389747c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Phoenix SoC, remove it form the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I24ad0a2fbc5a973c0cb40ed10942b5efc31191aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Mendocino SoC, remove it form the global NVS
and add an ACPI object for this in the DSDT of the mainboards that use
it in their ACPI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1ed0407826f579eb14169246b7b14ba677c20e8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Cezanne SoC, remove it form the global NVS
and add an ACPI object for this in the DSDT of the mainboards that use
it in their ACPI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6953da5e0f1966aa3022364d9a9c72ebafc698cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Picasso SoC, remove it form the global NVS
and add an ACPI object for this in the DSDT of the mainboards that use
it in their ACPI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia265f3eebf5e48c185d2e4bf4ef74f8eab7c9606
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Stoneyridge SoC, remove it form the global
NVS and add an ACPI object for this in the DSDT of the mainboards that
use it in their ACPI code. Eventually the LIDS object should probably be
moved to the EC's ACPI code, but that's out of scope for this patch.
TEST=google/liara doesn't show ACPI errors in Linux' dmesg
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I778c4189607035b4765c6cb8b2e74030dcf9069f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This simplifies the code flow of the cpu init. APL can do CPU init after
calling FSP-S, while GLK needs to do that before. This is now reflected
directly in the cpu ops rather than using
CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT as a proxy.
Change-Id: I7fd1db72ca98f0a1b8fd03a979308a7c701a8a54
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Not exactly sure about the usb4_xhci controllers, but for now I assume
those will behave like any other XHCI controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22384f58e245a1486793831d29d22e9c618f646c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The PCI Device ID Assignments table from PPRs #57019 Rev 1.65 and
PPR #57396 Rev 1.54 were used as a reference. Some devices will need to
have ops added in future patches. Since the xhci_2 device isn't there
any more, also drop it from the mainboard devicetrees. The actual USB
port configuration on xhci_0 and xhci_1 is updated in the next patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49721bc44fa1e2a0118a8c3ac79a36aee64be687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Now that the PCIe ports on device 1 are added, rename the aliases for
the PCIe ports on device 2 to have a common naming scheme. For phoenix
the device alias names are based on the device and function number the
bridge is connected to.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f5698408019bb9222b599dd78540ca1b187b56d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72737
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only the PCIe ports on the functions of device 2 were present in the
devicetree and had the amd_external_pcie_gpp_ops ops assigned. Add the
missing PCIe ports on the functions of device 1 and assign the
amd_external_pcie_gpp_ops ops to them.
This SoC uses a slightly different naming scheme for its PCIe GPP ports.
Previously the PCIe GPP bridge number from the PCI Device ID Assignments
table from the PPR was used. Those bridge numbers are one less than the
function numbers of the device. This is due to function 0 being a dummy
bridge to avoid having to shuffle around the function numbers when the
first bridge is unused, since the PCIe specification mandates the
function 0 to be implemented if any other function on the same device is
implemented. In order for the device aliases to be consistent with the
PCIe device and function numbers which is way more commonly used and
also what lspci shows and what goes into the DXIO descriptors, change
the naming scheme of the aliases.
This was checked with PPR #57019 Rev 1.65 and PPR #57396 Rev 1.54.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib5c62c1df585877d9b6986a462a3636d4f2eb4c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72736
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch requests FSP to enable the MRC fast boot feature along
with FSP v2473.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If4a621e55c853505f7a702181ae5a70dc56d5b5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72745
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit b171f768127d ("soc/amd/*: Hook up GPP bridges ops to devicetree")
missed adding the amd_external_pcie_gpp_ops ops to the gpp_gfx_bridge
PCIe ports, so add them. Those devices were previously covered by the
PCI_DID_AMD_FAM17H_MODEL60H_PCIE_GPP_D1 PCI device ID in the list that
got removed in the referenced commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I55434bf486569b32901b3840193a09cc5955abb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This switches the Picasso SoC to use the common reset code.
Picasso supports warm resets, so set the SOC_AMD_SUPPORTS_WARM_RESET
flag.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I52515b20ef6c70b137f176d95480757b16bd8735
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72755
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This switches the Phoenix & Glinda SoCs to use the common reset code.
Cezanne and newer do not support warm reset, so use cold resets in all
cases (including the OS).
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4593fa9766ac9e988722a02e355c971e147b8fae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72754
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This switches the Cezanne & Mendocino SoCs to use the common reset code.
This patch does not change any behavior on those chips.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie05c790573e4e68f3ec91bacffcc7d7efb986d79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72659
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows us to use the same file for PCO, CZN, MDN, PHX, & Glinda.
PCO supports the warm reset, and future chips can support it by setting
the SOC_AMD_SUPPORTS_WARM_RESET option.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib6459e7ab82aacbe57b4c2fc5bbb3759dc5266f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72658
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No bootstate hook is called on exit of BS_OS_RESUME or BS_PAYLOAD_BOOT.
Change-Id: I2b5b834d0663616a9523fd119f007e3bac8e7bf2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib96fcb86fd2c3fe16f23c8f038f4930a832a5b01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I7eaf625e5acfcefdae7c81e186de36b42c06ee67
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
This commit provides a dev tree setting for partners to enable/disable
TccoldHandshake for the sighting in doc:723158
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=compile ok and FSP UPD is config properly
Change-Id: Ica13b98204acebef7f0b9a4411b4ac19f53cad6e
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68635
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some reserved address range listed in Alder Lake Platform Firmware
Architecture Specification document 626540 section 6.4 ADL - System
Memory Map such as North TraceHub ranges were missing. Details about
North TraceHub (aka. Intel TraceHub) can be found in Intel Trace
Hub (Intel TH) Developer's Manual document 671536.
BUG=b:264648959
TEST=Compilation successful
Change-Id: I14803a7297c8c5edefe564d92bfe7314f6769942
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds the {MCH:a706, TDP:28W} missing 28W configuration.
BUG=b:267666609
BRANCH=firmware-brya-14505.B
TEST=Power Limit are properly set on skolas 28W
Change-Id: Ice35d622eeec5799c53de086430d00dc8789097e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
If we show the user early signs of life during CSE FW sync or MRC
(re)training, log these to the eventLog (ELOG_TYPE_FW_EARLY_SOL).
These can be used to ensure persistence across global reset (e.g. after
CSE sync) so that they can be later retrieved in order to build things
such as test automation ensuring that we went through the SOL
path/display initialized.
BUG=b:264648959
TEST=event shows in eventlog after CSE sync and/or MRC
Change-Id: I8181370633a1ecff77b051d3110f593c3eb484a2
Signed-off-by: Tarun Tuli <taruntuli@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71295
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Intel SPR-SP (Sapphire Rapids Scalable Processor) was product launched
on Jan. 10, 2023.
Change-Id: I14cf115b02d8edff9b48e744b798a3b1ba18b8bf
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
This patch enables S0i2.2 by letting 1.5V Phy supply to control the
externa FET.
BUG=b:256805904
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8771c11ce3b305343c7e96510e1375538d5e7f04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72709
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
USB1_DRV_VBUS is used to provide 5V power for USB on MT8188 EVB and it's
not used on Geralt. Therefore, remove the GPIO setting of USB1_DRV_VBUS.
TEST=read usb data successfully.
BUG=b:236331724
Change-Id: Iffea7b288c83c81648d4c7ca30d2f0961f9853ff
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72641
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With New Crypto upgrade we need to have 1 block of 4Kb increase in
romstage, by which we can see an improvement of Boot performance
by 100 msec.
BUG=b:218406702
TEST=Validated on qualcomm sc7280 development board
Boot performance improved by 100 msec observed.
Change-Id: I9f5c8a79993fc1c529fae5cea4c4182663643ddd
Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72646
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
During boot, gpi_firmware_load gets called twice because there are
2 serial engines. Thus gsi_fw blob is also decompressed twice and is
written to base addresses of SEs. This is redundant.
Perform the decompression once on first call and save the header
in static variable which can be reused in next call.
BUG=b:262426214
TEST=Validated on qualcomm sc7280 development board
Saving of 80ms observed while testing with 130 boot cycles.
Change-Id: If98a3974f0791dffdf675c02cc28375d0485c485
Signed-off-by: Vijaya Nivarthi <vnivarth@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71927
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Like Cezanne, Mendocino does not support warm resets. Change all resets
(including resets in the OS) to cold resets (like Cezanne).
BUG=b:248221908
TEST=Run suspend_stress_test, then reboot
Change-Id: I1fbb4cc6eb6e6de9616d00d0191ccf3c0ac55278
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72486
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I58faed286718f5eab714cd39001177e50feb4f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic42c67163fe42392952499293e91e35537cb9147
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I34d3c4a60653fe0c1766cd50c96b8d3fe63637d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The D-state list lists the devices with the corresponding
D-state that the devices should be in, in order to enter LPM.
DPTF is not mentioned in Intel's document 595644 as one of
the devices.
This CL removes it to avoid a potential error seen in ADL
devices as mentioned in commit 3fd5b0c4cdeb ("soc/intel/adl:
remove DPTF from D-states list used to enter LPM")
TEST=Built and tested on Rex, saw SSDT generated properly.
BUG=b:231582182
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I9192ed9a7fb59ebba14f6d5082b400534b16ca72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72603
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<device/pci.h> chain-includes <device/pci_def.h> & <device/pci_type.h>.
Change-Id: I4e5999443e81ee1c4b1fd69942050b47f21f42f8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72626
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iec9cf7c195fa5cb5c8d992aeab400d05cbe801c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I103cdce8c23ff4adbf1057fa26bd67275f2ab0e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I036dcddf89e8d865d0dc3ef0bd9e48842d8bf6c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77a91c0a6d937772bf25fa936cec8a710b9acf72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In CB:71614 Kyösti pointed out that ACPI_GPE0_BLK is the wrong address
to assign to proc_blk_addr; the correct one would be ACPI_CPU_CONTROL.
When looking a bit closer into this, it turned out that
acpigen_write_processor is generating deprecated AML opcodes, so replace
the acpigen_write_processor call with a call to the newly added
acpigen_write_processor_device function that also doesn't have the
proc_blk_addr and proc_blk_len parameters. The information about the IO
port for entering C-states is already written into an SSDT by
acpigen_write_CST_package which is likely also the reason why the wrong
proc_blk_addr value wasn't noticed for a very long time.
TEST=Mandolin still boots Ubuntu 22.04 LTS and Windows 10 and no
possibly related errors show up. Linux gets the expected C-state
information from the _CST package inside the processor device scope.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie67416e19e431029dd12da66ad44ddfa8586df03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This register isn't used in coreboot and isn't defined in the Picasso
PPR #55570 Rev 3.18.
To enter a lower C-state, a read request to a special IO port is done.
The base address of this group of IO ports is configured in
set_cstate_io_addr via the MSR_CSTATE_ADDRESS and that read won't leave
the CPU. IIRC trying to put the MMIO mapping for entering the lower
C-states into the _CST package didn't work as expected when it was tried
on I think Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib189993879feaa0a22f6810c4bd5c1a0bc8c5a27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I7dfd331e70f6d03c88248ca5147dbe6785a8e69d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
It turns out that the [0xfa000000-0xfaffffff] range conflicts with
some North TraceHub address space ranges ([0xfad00000-0xfadfffff] and
[0xfacfc000-0xfacfffff]).
Experiments have established that this conflicting range results in an
unpected PIPE A underrun issue reported by i915 and some visible
flickers on the display during boot.
The [0xf0000000-0xffffffff] range is a crowded memory space with
resources statically assigned to some devices but also some ranges
used at various point in the boot flow by the FSP.
To not run into any other potential conflicts, we want to pick a
unused memory space. But at this early stage of the boot, we do not
have full knowledge of what memory space is going to be used by the
FSP. As a result, we decided to pick the [0xaf000000-0xafffffff] range
as:
1. It does not conflicting with any coreboot memory space usage
2. It is the address the FSP uses by default for GFX MMIO BAR0 and as
such should not conflict with any FSP memory space usage.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=No flickers observed on boot
Change-Id: I6a00350ff4007bb7692d2ff6598b946cc6123302
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72605
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This fixes a NULL pointer deref introduced by 69cd729 (mb/*: Remove
lapic from devicetree).
Change-Id: I816fddfe3efe3c3aefe1b2ee28426dc1e1f3c962
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72599
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The LPC BIOS decode lock bit is defined in EBG EDS documentation.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I60df7e6da2b22b8eeb2094aeb5ee9667043bb30b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71954
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Intel SPR-SP (Sapphire Rapids Scalable Processor) chipset
belongs to Xeon-SP family. It was product launched on
Jan. 10, 2023.
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ifece05e2fbcc454cdee8e849cb4f146c89f54333
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The PMC registers are quite different between LBG and EBG. Move pmc.h
to lbg directory to differentiate.
Change-Id: I6f14059942210c222631e11cced0b5c05d3c1dc6
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72399
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I43590f0f792fca1c90ee8f8b32e6be47943c59df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72453
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add functions that allow checking and changing PTT state at runtime.
Can be useful for platforms that want to use dTPM instead and have no
means to stitch ME firmware binary with disabled PTT.
The changing function also checks for the current feature states via
HECI to ensure that the feature state will not be changed if not
needed.
TEST=Successfully switch to dTPM on Comet Lake i5-10210U SoC.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8426c46eada2d503d6ee72324c5d0025da3f2028
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
The D-state list lists the devices with the corresponding
D-state that the devices should be in, in order to enter LPM
DPTF is not mentioned in Intel's document 595644 as one of
the devices.
This CL removes it to avoid an error seen after it was added
to that table:
"ACPI Error: AE_NOT_FOUND, While resolving a named reference
package element - \_SB_.PCI0.DPTF (20200925/dspkginit-438)"
TEST=Built and tested on anahera and saw the error is gone
BUG=b:231582182
Change-Id: I00eddd7e4cc71a0c25e77ff53025dee5bf942de1
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This CL adds claimed memory regions that were missing for the
resource allocator. See commit ca741055e6b6 ("soc/intel/adl: Add
missing claimed memory regions") for details.
TEST=Booted rex and saw the previously missing ranges getting added
from AP Log (with this CL):
SA MMIO resource: MCHBAR -> base = 0xfedc0000, size = 0x00020000
SA MMIO resource: DMIBAR -> base = 0xfeda0000, size = 0x00001000
SA MMIO resource: EPBAR -> base = 0xfeda1000, size = 0x00001000
SA MMIO resource: REGBAR -> base = 0xd0000000, size = 0x10000000
SA MMIO resource: EDRAMBAR -> base = 0xfed80000, size = 0x00004000
SA MMIO resource: CRAB_ABORT -> base = 0xfeb00000, size = 0x00080000
SA MMIO resource: LT_SECURITY -> base = 0xfed20000, size = 0x00060000
SA MMIO resource: APIC -> base = 0xfec00000, size = 0x00100000
SA MMIO resource: PCH_RESERVED -> base = 0xfd800000, size = 0x01000000
SA MMIO resource: MMCONF -> base = 0xc0000000, size = 0x10000000
SA MMIO resource: DSM -> base = 0x7c000000, size = 0x04000000
SA MMIO resource: TSEG -> base = 0x7b000000, size = 0x00800000
SA MMIO resource: GSM -> base = 0x7b800000, size = 0x00800000
dmesg:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000759c9fff] usable
BIOS-e820: [mem 0x00000000759ca000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000c0000000-0x00000000e0ffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000f9ffffff] reserved
BIOS-e820: [mem 0x00000000fd800000-0x00000000fe7fffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb7ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed83fff] reserved
BIOS-e820: [mem 0x00000000feda0000-0x00000000feda1fff] reserved
BIOS-e820: [mem 0x00000000fedc0000-0x00000000feddffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
BIOS-e820: [mem 0x000003fff0aa0000-0x000003fff0aa1fff] reserved
Change-Id: I749e7b6e969f8d6314fcd2906acd7de69d4d9f9c
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The Alder Lake PEIM graphics driver executed as part of the FSP does
not wait for the panel power cycle to complete before it initializes
communication with the display. It can result in AUX channel
communication time out and PEIM graphics driver failing to bring up
graphics.
If we have performed some graphics operation in romstage, it is
possible that a panel power cycle is still in progress. To prevent any
issue with the PEIM graphics driver it is preferable to ensure that
panel power cycle is complete.
This patch replaces commit ba2cef5b5493
("soc/intel/common/block/early_graphics: Introduce a 200 ms delay")
workaround patch.
BUG=b:264526798
BRANCH=firmware-brya-14505.B
TEST=Developer screen is visible in the recovery flow
Change-Id: Iadd6c9552b184f7d6ec8df9d0d392634864ba50b
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72419
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
We were using the libgfxinit `Initialize' function with the
`Clean_State' parameter because the more appropriate `Update_Output'
function was not performing all the necessary clean up operations for
the PEIM driver to be successful when libgfxinit was used in romstage.
Thanks to a lot of experiments and some log analysis efforts, we were
able to identify the missing operation and fix the `Update_Output'
function (cf. https://review.coreboot.org/c/libgfxinit/+/72123).
The `initialized' global variable is now unnecessary as we track the
initialization in the Ada code instead.
Since the `Update_Output' function does not return any value, this
patch modifies the `gma_gfxstop' prototype accordingly. This does not
have any impact as the return value was not used anyway.
BUG=b:264526798
BRANCH=firmware-brya-14505.B
TEST=Developer screen is visible
Change-Id: I53d6fadf65dc09bd984de96edb4c1f15b64aeed0
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72125
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Getting an error from the Kernel on Rex devices:
> ACPI Error: AE_NOT_FOUND, While resolving a named reference
> package element - \_SB_.PCI0.FSPI (20210730/dspkginit-438)
FSPI is defined in src/soc/intel/meteorlake/chipset.cb:
device pci 1f.5 alias fast_spi on end
This CL adds the corresponding FSPI device to the DSDT to prevent
the error mentioned above.
See commit feed8e4bd9dc ("soc/intel/adl/acpi: add FSPI to DSDT") for
the corresponding ADL CL.
TEST=Built and tested on brya by verifying the error is gone.
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Id8d2a1b5e074f036345e028b117d420bf36a9042
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This function reads out the current value set to output for a GPIO pin.
Ex: GPP_E0 is set to output
int e0_val;
e0_val = gpio_tx_get(GPP_E0);
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ib02b9ab50d378eb163d91aed1576428b49cec2cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72127
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Current size of the cbmem premem buffer (8KB) is sometimes insufficient
to contain the complete debug log causing the cbmem console buffer to
indicate overflow.
This patch increases the premem cbmem buffer size to 16KB so that
the complete debug log can be stored in it.
TEST=Make sure that logs from all the boot stages can be seen using
'cbmem -c'.
Change-Id: I60c68322c52191eabf7e06b4be06e66f90ff8751
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71290
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently ASPM cannot be disabled by individual mainboards, if the
soc Kconfig includes SOC_INTEL_COMMON_PCH_CLIENT. Other options like
PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE are already configurable by
individual mainboards if needed. This change makes PCIEXP_ASPM one of
these configurable options.
Test: build prodrive/atlas and see that build/config.h lists the
option CONFIG_PCIEXP_ASPM as disabled.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ic9c049f1d225bc21d8da5bd208651ad847ae0c6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72117
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Currently most of the FSP debug messages (when enabled) are truncated due to insufficient size of cbmem buffer.
Increase premem cbmem console size to 0x16000 bytes and cbmem buffer size to 0x100000 bytes so that cbmem buffer can contain most of the debug logs when FSP debug messages are enabled.
TEST=Verify output of 'cbmem -c' when FSP debug messages are enabled but MRC debug message.
Change-Id: I0273fb14916f213b686270a9dec4c1b47612af4d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71289
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current size of the cbmem buffer (128KB) is insufficient to contain the
complete debug log causing the cbmem console buffer to wrap.
This patch increases cbmem buffer size to 256KB so that the complete
debug log can be stored in it.
TEST=Make sure that logs from all the boot stages can be seen using
'cbmem -c'.
Change-Id: I2099386dd87a010c3a5937bd896620270f587b1c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71288
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel SPR-SP (Sapphire Rapids Scalable Processor) was product launched
on Jan. 10, 2023. The chipset includes Emmitsburg PCH.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I05ed8f753bf63b6cb3035e973eb6a7974edfd673
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
This patch implements a new API to make the UFS controller function
disabled. Additionally, perform a warm reset post disabling the UFS
controller to let PMC know about the state of the UFS controller
and disable the MPHY clock.
BUG=b:264838335
TEST=Able to build and boot Google/Marasov successfully.
From the AP log, I am able to confirm that UFS is function disabled
using PSF.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I940a634f70f8c97ef1234866d4c5a1ff224c6e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
