| Age | Commit message (Collapse) | Author |
|---|
|
Configuring the Early Caching Ramtop range as Write-Back (WB) before
memory initialization is NOT RECOMMENDED. Speculative execution within
this WB range can lead to issues. WB configuration should be applied
to this range ONLY AFTER memory initialization is complete.
To enable Ramtop caching before memory initialization, use
Write-Combining (WC) instead of Write-Back (WB).
This change applies the recommendation by always configuring the early
ramtop caching range as WC.
BUG=b:373290479
TEST=Able to build and boot google/trulo.
Change-Id: Idf6f0be1bc0daa8037ea9c52932eb72434156071
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85027
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This patch adds a new field, `size`, to the `ramtop_table` structure to
store the size of the RAMTOP region.
The RAMTOP size is calculated as the difference between the cbmem top
and the FSP reserved memory base address, aligned up to the nearest 4MB
boundary.
This change allows for more accurate tracking of the RAMTOP region and
improves compatibility with different memory configurations.
Previously, the RAMTOP size was always assumed to be 16MB. This could
lead to boot hangs on systems with different memory configurations,
where the actual RAMTOP size exceeded 16MB.
By dynamically calculating and storing the RAMTOP size, this patch
ensures that the correct memory range is used for intermediate
caching, preventing boot hangs and improving boot speed.
The `update_ramtop()` function is updated to write the calculated
RAMTOP size to CMOS along with the RAMTOP address.
The `early_ramtop_enable_cache_range()` function is also updated to
use the RAMTOP size from CMOS to set the correct MTRR range.
BUG=b:373290479
TEST=Built and booted successfully on various platforms. Verified that
the RAMTOP size is correctly calculated and stored in CMOS
Change-Id: I16d610c5791895b59da57d543c54da6621617912
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85003
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Map a proper DRAM range for memory test during calibration.
TEST=memory test passed on Rauru
BUG=b:317009620
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Change-Id: I06f31ef14715897ba889076d78b8c2d015dd08ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85035
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Increase the bootblock size to support TPM.
TEST=Build pass
BUG=b:317009620
Change-Id: I11fb505790a85d967032d48d9aa18e22f525a2e5
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
BUG=b:357011633
TEST=build and boot coreboot image on Google/Fatcat board.
Change-Id: I14fa8cf06144f46369cc8cab6087c790280e9859
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h
to static.h") and commit 05a13e7ed9b9 ("sconfig: Move (WEAK_)DEV_PTR
from device.h to static.h"), sources that use code generated from the
devicetree should directly include static.h. This allows static.h to be
removed from device.h, eliminating many unnecessary dependencies on the
devicetree for objects that only need the device types and function
declarations.
Add static.h to the includes of all remaining files that require static
devicetree access through config_of_soc(), the sconfig generated names,
or DEV_PTR().
Change-Id: I1d35ff2ac22f9ff5e0aa38b7ad707619e50387f3
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84591
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
As per commit 05a13e7ed9b9 ("sconfig: Move (WEAK_)DEV_PTR from device.h
to static.h"), sources that require access to devicetree static devices
should directly include static.h. This allows static.h to be removed
from device.h, eliminating unnecessary dependencies on the devicetree
for objects that only need the device types and function declarations.
The DEV_PTR macro resolves to names declared in static_devices.h, which
is then included in static.h, so include the header whenever the macro
is used.
Change-Id: Ie281e9a9c015b19bfc96b83021a6e3afd98abcc3
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84677
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h
to static.h"), sources that require access to the devicetree should
directly include static.h so that it can be removed from device.h,
eliminating unnecessary dependencies on static.h for files that only
need the types and function declarations in device.h.
Change-Id: I3c118a707dfe7bb8932606f30eae52ef0b4c9efe
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
HPET General Capabilities and ID Register at offset 0x0 and Timer 0
Configuration and Capability Register at offset 0x100 are used to
determine the generation of HPET ACPI tables. This patch adds
macro definitions for these registers and fields. Definitions are
from IA-PC HPET (High Precision Event Timers) Specification Revision
1.0a.
Change-Id: I31413afcbfc42307e3ad3f99d75f33f87092d7aa
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84252
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel common IMC contains an embedded SMBus controller for SPD data
access. This patch implements IMC based SPD access supports through
MMIO.
Register definitons are from Intel Atom Processor C5100, C5300, P5300
and P5700 Product Families EDS, doc No. 575160 rev 2.0.
Change-Id: I3f47ddeda94d3882852d64c0052f8fb42b6b7ad2
Tested-by: Yuchi Chen <yuchi.chen@intel.com>
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
By default, PCH SMBus codes will be called to retrieve SPD data. This
patch adds a SPD IO layer so that SoC could implement its specific SPD
IO layer functions such as using Integrated Memory Controller to get
SPD data.
Change-Id: I656298aeda409fca3c85266b5b8727fac9bfc917
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84201
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel server processors have a different system agent design, it has
some differences with client platform such as (1) no BDSM and BGSM
registers; (2) different alignment size and bit fields in TOLUD,
TOUUD and TSEG registers. Thus this patch adds a new common block for
server platform system agent.
Change-Id: If32c2a6524c9d55ce7f9c3dd203bcf85cab76c2c
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83318
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This updates power_limits_config for Panther Lake U and H.
Source:
Intel PTL PDG 813278
Intel PTL FSP Power limit profiles table
BUG=b:357011633
TEST=Build fatcat and boot with Panther Lake SoC and RVP.
Change-Id: I1b9276af7f1e30b1cda3d8c016524fd6397fa4b2
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This patch adds new DID0 PCI device IDs for Intel PTL-H.
Additionally, updates the System Agent driver's `systemagent_ids`
list and Panther Lake SoC bootblock to support these new IDs.
Source: Intel PTL-FAS. Document Number 812562
BUG=b:347669091
TEST=Build fatcat and boot with Panther Lake SoC with newly added
MCH ID.
With patch, coreboot log:
`[DEBUG] MCH: device id b004 (rev 00) is Pantherlake H`
`[DEBUG] MCH: device id b00a (rev 00) is Pantherlake H`
Change-Id: I56e795696f661d88828d7549f856eee19c46c942
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84916
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Add SPI controller driver code with support for 8 buses (SPI0 to SPI7).
Test=Build pass, verify the wavefroms for SPI0~7 are correct.
BUG=b:317009620
Change-Id: I10dd1105931c4911ce5257803073b7af76115c75
Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84930
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PLL and clock init code, frequency meter and APIs for raising
little CPU frequency and set tvdpll frequency.
TEST=build pass and driver init ok
BUG=b:317009620
Signed-off-by: Guangjie Song <guangjie.song@mediatek.corp-partner.google.com>
Change-Id: Icac99fb210c87c8b7b14af627fbd2f14e4c47240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Reduce stack usage of acpi_fill_srat_memory() by 18KiB.
Directly write the SRAT table entries instead of using a temporary
buffer on the stack.
FIXES: Crash on ocp/tiogapass when writing SRAT table
TEST: Still boots on intel/archercity_crb
Change-Id: I91a6787ade8b465da7837b241c0aab00251f7de4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84832
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When soc_acpi_name() returns NULL do not create the AML code.
This prevents errors on the OS side when it tries to parse the AML
code and doesn't find a name string for the device:
ACPI Warning: Invalid character(s) in name (0x44415F08), repaired: [*_AD]
Change-Id: I72225a975663a1028283437cac3b9231b7c77ead
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
In coreboot, LPC ACPI objects with its attached devices are
usually provided by static DSDT. For Xeon-SP Gen6 LPC, its logical
attached devices are created from dynamic SSDT (e.g. super IO).
Create a simple SSDT for LPC in dynamic way as well to complete
the device relationship chain.
Fix below issues during Linux OS boot. The issue will block
Windows OS boot as well.
[ 22.986142] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.DI00.LPCB], AE_NOT_FOUND (20230628/dswload2-162)
[ 22.986792] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
[ 22.987786] ACPI: Skipping parse of AML opcode: Scope (0x0010)
Change-Id: I08543fc77f0f3e633b05889e921c5183e6e20d8e
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84842
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable IRQ routing per PCH IRQ usage convention and report domain
_PRT.
Change-Id: I095c7a302894437c90d854ce4e30467357eee2ba
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84328
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch addresses uninitialized usb_cfg pointer warning which is also
an error - src/soc/intel/meteorlake/fsp_params.c: error: 'usb_cfg' may
be used uninitialized in this function [-Werror=maybe-uninitialized]
BUG=None
TEST=./util/abuild/abuild for GOOGLE_HATCH, GOOGLE_VOLTEER, GOOGLE_KARIS
Change-Id: I169b6d3a979c4db78e7c0932a126d8b0a9306da7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85026
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch introduces an API to check whether CSE is booting from
the RW slot.
This information can be used to determine if a CSE firmware update is
pending, which would help to optimize the boot flow by knowing if any
reset is expected due to CSE sync.
TEST=Able to build google/brox.
Change-Id: I1a63ae9992d83b439a0f995d599ee475f7abd75b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch introduces support for storing the MRC cache based on the
MRC version for RPL platforms. This patch selects the
MRC_CACHE_USING_MRC_VERSION option when client SOC_INTEL_RAPTORLAKE is
chosen.
BUG=b:281846937
TEST=Able to build and boot google/brox and verify MRC version in CBMEM.
Change-Id: I8adf519c7f27b30d69c19f1c37cf410ac8ae54db
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Call the PSP RPMC NVRAM 'PSP RPMC NVRAM' instead of 'PSP NVRAM' in the
debug console output to not be misleading, since the RPMC feature uses
the 'PSP_RPMC_NVRAM' fmap section and not the 'PSP_NVRAM' fmap section.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie89dfcfe4b8780f422c222477bb627e03bd3662d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/85007
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
acpigen_write_PRT_pre_routed writes _PRT covering all direct
subordinate child devices based on interrupt line/pin info from
their PCI configuration spaces. It is required that IRQ routing
and PCI configuration space update to be done ahead of time.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ic54888f76d2ec9804442bec5aec54267d9a16d7c
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82253
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
TEST=emerge-geralt coreboot
Change-Id: I9ee64677e9126789a07db1963a2c17a504cb4d9c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84959
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rather than using a static array size for the `offset` variable, use a
pointer named `offsets` that points to a dynamically allocated array. A
separate variable called `offset_size` stores the size of this array.
TEST=emerge-corsola coreboot && emerge-geralt coreboot
Change-Id: I4b89c27fd693ee08e670c1a9ab4cbdbec220bee7
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch addresses uninitialized usb_cfg pointer warning which is also
an error - src/soc/intel/alderlake/fsp_params.c:936:48: error: 'usb_cfg'
may be used uninitialized in this function [-Werror=maybe-uninitialized]
BUG=None
TEST=./util/abuild/abuild
Change-Id: I764fed561dfe2a571f3404fe505997edd7aa5ff7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84939
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RPL FSP v5311 uses 202305 Edk2. Select UDK_202305_BINDING Kconfig for
RPL SoC.
BUG=b:281846937
TEST=Able to build and boot google/brox.
Change-Id: I8dcc7d85cddadcce148ded5a81658253e8598413
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84722
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Reserve Root Port LTR mechanism in FSP, in case some devices
need to optimize LTR.
BUG=366383364
TEST=Tested on Awasuki with RTL8852BE
use lspci -xxx to get PCIE config space dump, and LTR Mechanism Enable
bit is offset 68h[10].
00:1c.0 PCI bridge: Intel Corporation Device 4dbf (rev 01)
00: 86 80 bf 4d 07 05 10 00 01 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 20 20 00 20
20: c0 7f c0 7f f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 04 12 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 13 4c 72 08
50: 43 00 11 70 00 b2 3c 00 00 00 40 01 08 00 00 00
60: 00 00 00 00 37 08 00 00 00 04 00 00 0e 00 00 00
70: 03 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 38 02 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 86 80 bf 4d 00 00 00 00 00 00 00 00
a0: 01 00 03 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 10 00 07 42 18 01 40 08 00 9e 09 00 00 00 00
e0: 00 03 e3 00 00 00 00 00 16 00 10 00 00 00 00 00
f0: 50 01 00 00 00 00 00 4c b5 0f 02 01 04 00 00 84
Change-Id: I85e50b01cc9fb5522d457cfce3700b7c85d7012f
Signed-off-by: Lawrence Chang <lawrence.chang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84866
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: David Ruth <druth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the SOC_INTEL_GFX_MBUS_JOIN configuration option.
Support for fast modeset joining has been added to the mainline i915
kernel driver (https://patchwork.freedesktop.org/series/130480/),
making this coreboot-specific workaround unnecessary.
BUG=b:291885733
TEST=Successful build and boot of google/screebo with single and dual
displays, no redundant boot splash.
Change-Id: Ifb0416df53a453ce16815f9fd52ec6b53fade5e2
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81034
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Paz Zcharya <pazz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Irq2axi translates wire-based interrupt into message signal interrupt.
Since MT8196 uses legacy wire-based interrupt, this feature needs to be
disabled. If the interrupt is not handled, it will cause the system fail
to boot.
TEST=Build pass, check irq2axi_disable log and the interrupt can be
correctly handled by checking /proc/interrupts.
BUG=b:317009620
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I0e89a0ee75e574a4b9e8df0a0f6a5f6e03bba2d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84896
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The boot time is improved by 58ms in bootblock. (78ms -> 20m)
BUG=b:361729697
TEST=check cbmem
Change-Id: I27ce378ba8e3744cfb3921835e34b32bbba991cb
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84897
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
De-assert PERST# at romstage to reduce the waiting time in ramstage.
BUG=b:361728592
TEST=The boot time improves 62ms
Change-Id: I2cd5cd59e7513b6e4036c3e8013a3c7322d2f787
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Since the functions that call 'spi_controller_available' end up checking
if the SPI controller is busy, refactor the function into
'spi_controller_busy' to simplify the logic on the caller's side. Also
move printing of the notice that the SPI controller is busy to
'spi_controller_busy' to not have that duplicated in caller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibc21ab6eacf07c4adffdb4658142c2f9dfcbf2a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84920
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the RPMC-related functions will only need the spi_flash struct,
but not the region_device struct of the store region corresponding to
the 'target_nv_id', factor out 'get_flash_device' from
'find_psp_spi_flash_device_region'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia99d3454df2c1c4182c193da7de1bbb4eef18313
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84905
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ana Carolina Cabral
|
|
Disable UFS controllers during romstage initialization only when
resuming from S5 (full power off).
On warm reboot, the UFS controllers are already disabled by the
previous boot cycle, so disabling them again is unnecessary.
TEST=Able to ensure UFS controller is already disabled in warm reboot
path and not causing any problem during S0ix cycle test.
Change-Id: Ia27d2156a002cef032d5f57d212cf4eb520b3bdf
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
Disable the `FSP_UGOP_EARLY_SIGN_OF_LIFE` option (eSOL) for the
Ovis baseboard.
eSOL currently only supports display output over eDP and HDMI.
Ovis/Deku exclusively use Type-C for display, and eSOL cannot render
output over Type-C during early boot because it depends on Type-C
firmware loaded in a later stage.
TEST=Able to build and boot google/deku.
Change-Id: I5ddbd340f667b1631a42d130a793f0b1831aa0ba
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
The size of the inner array of the 2-dimensional array pad_funcs should
be 4 instead of SPI_BUS_NUMBER (6). This bug leads to two extra
gpio_set_mode() calls with unexpected GPIOs.
Inspecting spi.o, the data immediately after the .rodata.pad_funcs
section is .rodata.spi_ctrlr_bus_map, with the following data:
00000428 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00
00000438 00 00 00 00 00 00 00 00 ...
This is equivalent to the following calls:
gpio_set_mode(GPIO(GPIO05), 0);
gpio_set_mode(GPIO(GPIO00), 0);
The second call is already included in the pad_funcs array, so the first
call is the only practical impact of this bug.
Change-Id: I9c44f09b3cdadbbf039b95efca7144f213672092
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
If the mainboard expects upcoming reset, then skip the reset after
disabling UFS. This will reduce the number of resets during firmware
update.
BUG=b:375444631
TEST=Build Brox BIOS image and boot to OS. Perform a firmware update and
confirm that the number of reset is reduced by 2 resets.
Change-Id: I4399555302ec23a76f89f406f437f311eea0ef99
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84935
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch implements the `save_dimm_info()` API to populate and pass
DRAM-related information to the next stage. This information
is used to generate the SMBIOS memory table, providing details about
installed DIMMs.
This addresses the issue where SMBIOS lacked detailed DIMM information.
Verified that `dmidecode` correctly dumps the DIMM information from the
SMBIOS table after this change.
BUG=b:376103463
TEST=Built and booted successfully. Verified DIMM info in SMBIOS using
`dmidecode`.
> dmidecode -t 17
```
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x000B, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2 GB
Form Factor: Row Of Chips
Set: None
Locator: Channel-0-DIMM-0
Bank Locator: BANK 0
Type: LPDDR5
Type Detail: Unknown Synchronous
Speed: 6400 MT/s
Manufacturer: Hynix
Serial Number: 00000000
Asset Tag: Channel-0-DIMM-0-AssetTag
Part Number: H58G56BK7BX068
Rank: 1
Configured Memory Speed: 6400 MT/s
Minimum Voltage: 0.5 V
Maximum Voltage: 0.5 V
Configured Voltage: 0.5 V
...
...
Handle 0x0012, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 16 bits
Data Width: 16 bits
Size: 2 GB
Form Factor: Row Of Chips
Set: None
Locator: Channel-3-DIMM-0
Bank Locator: BANK 0
Type: LPDDR5
Type Detail: Unknown Synchronous
Speed: 6400 MT/s
Manufacturer: Hynix
Serial Number: 00000000
Asset Tag: Channel-3-DIMM-0-AssetTag
Part Number: H58G56BK7BX068
Rank: 1
Configured Memory Speed: 6400 MT/s
Minimum Voltage: 0.5 V
Maximum Voltage: 0.5 V
Configured Voltage: 0.5 V
```
Change-Id: I3b942610272de401589ee0463de9cd0985974774
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch adds ACPI names for the following devices:
- THC0 (PCI: 00:10.0)
- THC1 (PCI: 00:10.1)
- SRAM (PCI: 00:14.2)
- FSPI (PCI: 00:1f.5)
TEST=Able to build and boot google/fatcat without any error.
w/o this patch:
[ERROR] Missing ACPI Name for PCI: 00:10.0
[ERROR] Missing ACPI Name for PCI: 00:10.1
[ERROR] Missing ACPI Name for PCI: 00:14.2
[ERROR] Missing ACPI Name for PCI: 00:1f.5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I474089607522a4bd13375cc34b8f8645ca3663d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84910
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This change sets the SMBUS device to min sleep state D0 in the ACPI
sleep state table.
TEST=Able to build and boot google/fatcat.
w/o this patch:
[WARN ] Unknown min d_state for PCI: 00:1f.4
w/ this patch:
No Error or Warning.
Change-Id: If84d2ee8abfef34f6411e01e6c37d4e2008a3666
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84909
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This to fix the error when using C23:
cannot cast an object of type 'nullptr_t' to 'uintptr_t' (aka 'unsigned long')
return (uintptr_t)NULL;
^
Change-Id: Ibdc8794513a508fc61a5046692f854183c36b781
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Use the resource size to determine Vtd BAR size and drop the code to
calculate the Vtd BAR size.
While on it do not truncate the resource address to 32-bit, since the
DMAR entry is 64-bit wide anyway.
TEST: Booted on intel/archercity_crb
Change-Id: Ibaadc25c44345ba2eb9e6f75989d32b43d00d7a5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Align DSDT names with SSDT naming scheme, as provided by
iio_domain_set_acpi_name() and hide unused devices by implementing
the _STA method as done on newer platforms.
Change-Id: I8488907f28a78a6f71046dba54ba9cbd4b0652eb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Get rid of some helper functions by properly using a pci_driver.
Configure SAD if necessary and lock SAD if necessary in the newly added
SAD PCI driver. This allows to drop lock_pam0123(), unlock_pam_regions()
and socket0_get_ubox_busno().
- Fixes SAD instance on secondary sockets not decoding the C-F segments
as DRAM, which would prevent those sockets to access the ACPI/SMBIOS
table anchor
- Adds PCI multi segment support
(SKX and CPX only, other were working properly already)
- Moves locking of PAM0123_CSR and PAM456_CSR from SoC to driver code
Change-Id: I167b6ce48631fe3f97359ee33704f52ca854dbd1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84794
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the code to request the provisioning of the RPMC root key from the
PSP. When RPMC hasn't already been provisioned enabled and the PSP has
detected a SPI flash chip that both supports RPMC and has monotonic
counters that can still be provisioned, we send the PSP mailbox command
to request the RPMC provisioning and then reset the system, so the PSP
can do the actual provisioning.
TEST=On an out of tree AMD reference board using the Cezanne SoC code,
provisioning RPMC works as expected when selecting the corresponding
PERFORM_RPMC_PROVISIONING Kconfig option:
1st boot to initiate the RPMC provisioning:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC isn't provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 can still be provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 can still be provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
[DEBUG] RPMC: perform fusing using RPMC counter address 0
[DEBUG] OK
[NOTE ] RPMC: Rebooting
[INFO ] warm_reset() called!
2nd boot after the provisioning is done:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC is provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 has already been provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 has already been provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7760c0bf7618ca60ef160329d0110ac8109032a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84707
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the code to query the status of the replay-protected monotonic
counter (RPMC) infrastructure from the PSP and display it in a decoded
form.
Certain SPI flash chips have 4 32-bit monotonic counters in addition to
the actual flash storage. During the RPMC root key provisioning process,
which is done at the end of manufacturing, a 256 bit RPMC root key is
generated by the PSP and programmed into both SoC fuses and the RPMC SPI
flash chip. After that, commands to read or increment the monotonic
counters can be sent to the SPI flash which are protected by a
HMAC-SHA-256 signature using a key derived from the provisioned RPMC
root key.
The code to do the RPMC provisioning is added in a follow-up patch.
TEST=On an out of tree AMD reference board using the Cezanne SoC code
and with the SOC_AMD_COMMON_BLOCK_PSP_RPMC Kconfig option selected, the
newly added code prints this on the console after the provisioning was
done:
[DEBUG] PSP: Querying PSP capabilities...OK
[DEBUG] PSP: Querying HSTI state...OK
[SPEW ] RPMC is provisioned
[SPEW ] SPI flash supports RPMC
[SPEW ] RPMC revision 0
[SPEW ] PSP NVRAM isn't healthy
[SPEW ] PSP NVRAM is using RPMC protection
[SPEW ] SPI flash RPMC counter 0 has already been provisioned
[SPEW ] SPI flash RPMC counter 1 can still be provisioned
[SPEW ] SPI flash RPMC counter 2 can still be provisioned
[SPEW ] SPI flash RPMC counter 3 can still be provisioned
[SPEW ] SPI flash RPMC counter 0 is in use
[SPEW ] SPI flash RPMC counter 1 is not in use
[SPEW ] SPI flash RPMC counter 2 is not in use
[SPEW ] SPI flash RPMC counter 3 is not in use
[SPEW ] SoC RPMC slot 0 has already been provisioned
[SPEW ] SoC RPMC slot 1 can still be provisioned
[SPEW ] SoC RPMC slot 2 can still be provisioned
[SPEW ] SoC RPMC slot 3 can still be provisioned
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I498eec58189da710b725ac6575c68ba7ab0bcc43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84706
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The functions psp_get_ftpm_capabilties, psp_get_hsti_state, and
psp_get_psp_capabilities which were added in commit 5e7ab1a23346
("soc/amd/common/psp: add helper functions to retrieve capability bits")
have a bug in the 'cmd_status' error handling logic. In case of an
error, 'cmd_status' is non-zero, while the check somehow expected the
opposite. Fix the bug by returning an error if 'cmd_status' is non-zero.
Change-Id: Iafcd185ec4a8a4c0e463b0ac5bac3ef78a0af305
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84836
Reviewed-by: Ana Carolina Cabral
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Enable PCIe support for mt8196.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I9c0aaa1c6da8c247b319e7ed2317dd871e276461
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84698
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCIe driver for MT8196 platform.
According to the PCIe CEM specification, the deassertion of PERST#
should occur at least 100ms after the assertion. To ensure the 100ms
delay requirement is met and to save delay time in the ramstage, add
an early init data region to store the elapsed time since assertion.
This will speed up the boot time by 100ms.
PCIe port 1 and port 2 share the same PCIe resources, but PCIe port 2 is
not used. Therefore, in mtk_pcie_pre_init(), make sure PCIe port 2 is
reset to prevent interference with PCIe port 1.
TEST=Build pass, show pcie init pass log:
mtk_pcie_domain_enable: PCIe link up success (1)
BUG=b:317009620
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: I826a96822e88972bcd4966b6681797a646adf3d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
To reduce duplicate pcie.h in other SOC folder, mocw pcie.h to
mediatek/common folder
TEST=Build pass
BUG=b:317009620
Change-Id: I8e29ed4027433700652b07b3461eeb8546d45c9b
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This code is never reached since the hardware uses different SoCs.
Besides, mainboard specific code should not be added to SoC code.
Change-Id: Id82d5d0b829442c35c093974c06a029259838a9a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This commit improves the debug messages when initializing SPI flash
windows by adding the window type (Fixed Decode or Extended Decode)
to the log output.
This makes it easier to understand which window is being initialized
and can help with debugging issues related to SPI flash access.
w/o this patch:
[INFO ] MMAP window: SPI flash base=0x1000000, Host base=0xff000000, Size=0x1000000
[INFO ] MMAP window: SPI flash base=0x900000, Host base=0xf9900000, Size=0x700000
w/ this patch:
[INFO ] Fixed Decode Window: SPI flash base=0x1000000, Host base=0xff000000, Size=0x1000000
[INFO ] Extended Decode Window: SPI flash base=0x900000, Host base=0xf9900000, Size=0x700000
Change-Id: I904f70f42fa70ea06e6f49bd44631a8491463207
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
This patch adds SPI and some accelerator device IDs for SNR platform.
IDs are from Intel Atom Processor C5100, C5300, P5300 and P5700 Product
Families EDS, doc No. 575160 rev 2.0.
Change-Id: I7bd135d788816e4c3c42ac937450cf8cdcea00bc
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84782
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use boolean for pch_is_wpt() and pch_is_wpt_ulx().
Change-Id: Ifd1a46ebdbe08df6cc21ada100b94930b02cd7de
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
|
|
Add and use a new helper function to determine if a device is
1) a PCIe device
2) it's mark hot-plug capable
Change-Id: I61cc013844024b43808cd2f054310cb6676ba69e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
In case of a PCH-less platform, no DRHD_INCLUDE_PCI_ALL flags are
used, all PCIe integrated end points should be explicitly listed
under the DRHD they are affiliated to. Otherwise, the device MSI
setting could fail.
TESTED = Build and boot on intel/beechnutcity CRB
In CentOS Stream (5.14.0-479.el9.x86_64) 9 5.14.0-479.el9.x86_64,
without the changes, below failure logs will occur,
[ 6.908347] ------------[ cut here ]------------
[ 6.908353] WARNING: CPU: 0 PID: 8 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908374] Modules linked in:
[ 6.908379] CPU: 0 PID: 8 Comm: kworker/0:0 Not tainted 5.14.0-479.el9.x86_64 #1
[ 6.908385] Hardware name: Intel Beechnut City CRB/Beechnut City CRB, BIOS c1e9362c93be-dirty 09/25/2024
[ 6.908389] Workqueue: events work_for_cpu_fn
[ 6.908401] RIP: 0010:pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908411] Code: 90 90 90 0f 1f 44 00 00 48 8b 87 00 03 00 00 89 f2 48 85 c0 74 14 f6 40 28 01 74 0e 48 81 c7 c8 00 00 00 31 f6 e9 19 de ac ff <0f> 0b b8 ed ff ff ff c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00
[ 6.908417] RSP: 0000:ffffac47c0137c80 EFLAGS: 00010246
[ 6.908423] RAX: 0000000000000000 RBX: ffff9a0a874e2000 RCX: 000000000000009c
[ 6.908428] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9a0a874e2000
[ 6.908433] RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000001
[ 6.908437] R10: ffff9a0a8adcb258 R11: 0000000000000000 R12: 0000000000000001
[ 6.908440] R13: 0000000000000001 R14: ffff9a0a8738be00 R15: ffff9a0a874e20c8
[ 6.908443] FS: 0000000000000000(0000) GS:ffff9a0ded000000(0000) knlGS:0000000000000000
[ 6.908448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.908451] CR2: ffff9a11fffff000 CR3: 00000003cd410001 CR4: 0000000000770ef0
[ 6.908455] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6.908457] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
[ 6.908460] PKRU: 55555554
[ 6.908462] Call Trace:
[ 6.908465] <TASK>
[ 6.908470] ? show_trace_log_lvl+0x1c4/0x2df
[ 6.908484] ? show_trace_log_lvl+0x1c4/0x2df
[ 6.908492] ? msi_capability_init+0x193/0x280
[ 6.908501] ? pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908509] ? __warn+0x7e/0xd0
[ 6.908519] ? pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908527] ? report_bug+0x100/0x140
[ 6.908537] ? handle_bug+0x3c/0x70
[ 6.908545] ? exc_invalid_op+0x14/0x70
[ 6.908551] ? asm_exc_invalid_op+0x16/0x20
[ 6.908561] ? pci_msi_setup_msi_irqs+0x27/0x40
[ 6.908569] msi_capability_init+0x193/0x280
[ 6.908577] __pci_enable_msi_range+0x1a3/0x230
[ 6.908586] pci_alloc_irq_vectors_affinity+0xc3/0x110
[ 6.908594] pcie_port_enable_irq_vec+0x3f/0x250
[ 6.908604] ? __pci_set_master+0x31/0xd0
[ 6.908614] pcie_portdrv_probe+0xdf/0x300
[ 6.908620] local_pci_probe+0x4c/0xa0
[ 6.908627] work_for_cpu_fn+0x13/0x20
[ 6.908635] process_one_work+0x194/0x380
[ 6.908643] worker_thread+0x2fe/0x410
[ 6.908649] ? __pfx_worker_thread+0x10/0x10
[ 6.908655] kthread+0xdd/0x100
[ 6.908665] ? __pfx_kthread+0x10/0x10
[ 6.908673] ret_from_fork+0x29/0x50
[ 6.908686] </TASK>
[ 6.908688] ---[ end trace 0000000000000000 ]---
Change-Id: Ib015b002f2c077f50d48c046513504bdbd5b35aa
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84315
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I79b08630753b3aceb94becc8b9d682a3d3ca8310
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84308
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Alicja Michalska <ahplka19@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Id2a2946b7fdfd7fd245835afe6abc9a3f7e1a508
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Xeon-SP simics doesn't provide simulation of writable PAM-F
(Programmable Attribute Map) segment and hence coreboot needs to
enable SHADOW_ROM_TABLE_TO_EBDA to write system table pointers to
EBDA (Extended BIOS Data Area).
Change-Id: I216204987ad646a5d1655323d2725cfd3415a2d7
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The newly added enums and struct members will be used by MT8196.
BUG=none
TEST=emerge-corsola coreboot; emerge-geralt coreboot
Change-Id: I32e758cc4244114073606c418a69e0467cdf1039
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84773
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8196 has different pmif_spmi_arb and pmif_spi_arb configurations. Move
the common pmif data to a separate file in order to reuse common/pmif.c
as much as possible.
BUG=none
TEST=emerge-corsola coreboot; emerge-geralt coreboot
Change-Id: I24643ce58a57b9cc3c5220bc06a85b141b366eee
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
MT8196 has differenet configurations from other platforms. Make
CAL_TOL_RATE and CAL_MAX_VAL as per SoC configuration in order to reuse
common/pmif_clk.c
BUG=none
TEST=emerge-corsola coreboot; emerge-geralt coreboot
Change-Id: Iefc8180e1719d9796df7457b619a8792ceb762b2
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84771
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables SOC_INTEL_DEBUG_CONSENT to set PlatformDebugOption
to Trace Ready to have the safe configurations for Panther Lake
ES SoC.
This safe configuration will be removed once the feature is fully
verified and safe to be set to the default value.
BUG=b:373915085
TEST=Build fatcat and check the platform boots without an issue.
Change-Id: I1eaabcb2e2aaff16ee4e64d1c7709b229de18459
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84823
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pranava Y N <pranavayn@google.com>
|
|
If project set configure_ext_fivr = 0 will cause
PchFivrVccstIccMaxControl do not set correctly.
BUG=b:361831628
TEST=Verified on Teliks360 that affected DUTs.
Change-Id: I816de9c0c507aad3b73ab29e9f72048704f4662d
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84812
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Alder Lake, Meteor Lake and Panther Lake use the effective way size
when setting up the Enhanced No-Eviction Mode (cf.
`INTEL_CAR_ENEM_USE_EFFECTIVE_WAY_SIZE').
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521b
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83947
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
|
|
On Alder Lake, Meteor Lake and Panther Lake platforms the way size to
consider for NEM+ computation is the effective way size.
On Alder Lake, the External Design Specification #627270 "3.5.2
No-Eviction Mode (NEM) Sizes" provides a way to compute the effective
way size by reading the number of CBO. Unfortunately, reading the
number of CBO is not possible on Meteor Lake and Panther
Lake. Therefore, we instead compute the effective way size as the
biggest of power of two of the way size which works across all three
platforms.
The Kconfig `INTEL_CAR_ENEM_USE_EFFECTIVE_WAY_SIZE' is introduced to
control this behavior.
The issue addressed by this commit can be observed with the following
experiment: using a 18 MB LLC SKU, set `DCACHE_RAM_SIZE` to
0x400000 (4 MB).
The number of ways that used to be computed is round(0x400000 /
0x180000) = round(2.66) = 3. 3 ways were mapped to cover the 0x400000
NEM+ region. When the bootblock code accesses memory between 3 MB and
4 MB, the core would raise a page fault exception.
The right computation is: 0x400000 / eff_way_size(0x180000) = 4. 4
ways needs to be mapped to cover the entire 0x400000 NEM+ region.
BUG=b:360332771
TEST=Verified on PTL Intel reference platform
Change-Id: I5cb66da0aa977eecb64a0021268a6827747c521c
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
N-1 IBL (Integrated Boot Logic) codes are initially forked from
EBG (Emmitsburg PCH) codes (src/soc/intel/xeon_sp/ebg). N-1 IBL
codes are a set of stub codes to fulfill build sanity check for GNR
SoC and CRB codes before the formal codes are published.
Change-Id: I6bd5a2ed973ff91750c5ed1f9a57d30e41d8b97e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
TEST=Build & boot in IBM SBP1 system. Verified the settings are effective in FSP logs.
Change-Id: I4341ead89a2683f64c834a6981ba316fcfef4f9a
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84741
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Print a warning when the FSP UPD for CNVi Audio Offload is enabled
without the corresponding USB ACPI driver being enabled.
Throw an error when the USB ACPI driver is enabled without the
corresponding UPD being enabled.
Change-Id: I449c43998dd379dc68a33db47a2fe51cfe5cda2f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
GNR/SRF supports up to 18 logical IIO stacks. Revise IIO domain
ACPI name encoding in below form to support GNR/SRF,
prefix (16 bit) | socket (3-bit) | stack (5-bit)
Change-Id: I6f4c3c22980f2797dd47c8e0d684e0a3175030b7
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Since the Kconfig default for boolean options is already 'n', there's no
need to add that default to the option. Still kept the 'default n' for
the 3 options that result in fuses inside the SoC to be burnt
(PERFORM_RPMC_PROVISIONING, PERFORM_SPL_FUSING and
PSP_PLATFORM_SECURE_BOOT) to point out the fact that that's not selected
by default more clearly.
Change-Id: I55971f1f130d8ec23d4572a215008d9465e1520a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add the data structures used for the command buffers for the PSP SMI
commands to increment and request the state of the monotonic counters in
the SPI flash. These data structures are specific to the PSP SMI mailbox
interface and not the data structures from the RPMC specification. The
AGESA code was used as a reference.
Change-Id: I8bc8ff4cf9b7ebd0e034f040dde2db8385bb8f79
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
PEG0 should be set to PCI_INT_D, not PCI_INT_A. This fixes:
pcieport 0000:00:06.0: can't derive routing for PCI INT D
pcieport 0000:00:06.0: PCI INT D: not connected
PEG1 should also be PCI_INT_B.
Tested on `starbook_adl` with Ubuntu 24.04 by running SSD
benchmark with GNOME disks and suspend.
Change-Id: I0f37bb9ac8572d7335084a20fceca6977a491498
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84619
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This method is used to provision the CNVi, and ensure
that it is in the correct state.
Intel document #559910 details this.
Change-Id: Id8a36a09c7beaf3ba8b29d3276bd9dc59420dab5
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83713
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This method is used to limit frequencies on CNVi.
Intel document #559910 details this.
Change-Id: Idc4c35e71076fd31786212995472bb8d58c961de
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
Only the _PRR method is used here, however, _PS0, _PS3 and _DSW must
exist to avoid a BSOD on Windows.
Change-Id: Ib4a1a8a76ce74b991a3e8686e9594c2c2b145a39
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
Add a general purpose handle to allow CNVi to be notified
of state changes.
Intel document #559910 details this.
Change-Id: I36c98c525c99fb2b7b5ebd8b0e392e6626e97290
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83710
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a _PRR method that the OS can use to reset the wireless.
This is only used for integrated solutions and depends on the
CNMT Mutex that's created with `drivers/usb/acpi`. Whilst new
ACPI is added, the behavior of existing boards won't be
changed unless they configure the accompanying Bluetooth device.
Intel document #559910 details this.
Change-Id: I25e8462780badcad88b13052a6eb282c83af5def
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
All CNVi modules, integrated or dedicated only support D3 Hot
so add _S0W to limit the sleep state.
Intel document #559910 details this.
Change-Id: I1541cebc022adc927a9cd883500320e9ef82359f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
These fields are used to monitor events on CNVi.
Intel document #559910 details this.
Change-Id: I3c1efc039e929ad1eeb8a0dd7c176e370e502e0c
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83709
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
The CNVi driver is relatively basic in coreboot and most
noticeably, recent Linux kernels flag that lack of a _PRR
method, which is used to reset WiFi and Bluetooth.
This patch series adds methods recommended by Intel in
document #559910.
This patch defines an OpRegion for CNVi, for both
integrated and dedicated solutions.
Change-Id: Idd2ff93fb65c40f656804d96966e1881202ccb56
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Hook up CNVi Bluetooth UPDs to the devicetree. Set CnviBtCore to
`true` so the current behaviour is not changed.
Change-Id: Ic5640c23af3ce30498be814a6d7ce56988653b25
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84596
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the case where the x86 owns the SPI controller and the RPMC feature
is used, the PSP will send an SMI to the x86 side for it to send the
RPMC increment monotonic counter and RPMC request monotonic counter
commands to the SPI flash and return the result to the PSP. Add stubs
as handlers for those two PSP SMI commands.
Change-Id: If6091d2b0002f817922cac4cba373f0f981b646e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84702
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ana Cabral
|
|
Meteor Lake handles a misconfigured devicetree better than Alder Lake
and Tiger Lake; it throws a warning and corrects the FSP config rather
than asserting.
Copy that behavior to Alder Lake and Tiger Lake.
Change-Id: Ifd768fc31a0a6ef2fa0ae7e890cf0b47a9968d30
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84647
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
|
|
The Intel Bluetooth driver can be combined with either CNVi, or
full PCI wireless cards such as the AX210. Move it to the USB
code so it can be used by either or.
Change-Id: Ib456b1870501182b2d8788e5d53bbf4d7981f91b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84627
Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP for Comet Lake S allows one to configure 16 USB2 (PortUsb20Enable
array) ports and 10 USB3 (PortUsb30Enable array) ports [1, 2].
[1] src/soc/intel/cannonlake/chip.h
[2] 3rdparty/fsp/CometLakeFspBinPkg/CometLakeS/Include/FspsUpd.h
Change-Id: Ie69543f335be1a69cf0c068335c2e17eebf4c6a9
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
All newer Intel SoCs use `s_cfg` as the variable name for a FSP_S_CONFIG
struct pointer, so use that for CNL as well to avoid copy/paste errors
when applying changes across SoCs which touch the FSP_S_CONFIG struct.
Change-Id: I5eadb77f312ad6ad1072bc02adf98d97b1940236
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84653
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h
to static.h"), sources that require access to the devicetree should
directly include static.h so that it can be removed from device.h,
eliminating unnecessary dependencies on static.h for files that only
need the types and function declarations in device.h.
Change-Id: I03e42689487c6d63436d9c2945558073aae87cd1
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84586
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hook up PCIEXP_CLK_PM, PCIEXP_ASPM and PCIEXP_L1_SUBSTATE to the
option API.
This provides users an easy way to disable power saving options
that can limit performance.
Change-Id: I2b06a7c734a4fd4073e86c668742ee35e1d79956
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81906
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP-S UPDs are programmed according to the configuration (Kconfig and
device tree) in ramstage.
BUG=348678529
TEST=Hardware is programmed as desired and Intel Panther Lake
reference board boots to UI.
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6989
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84552
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Remove TODO after checking the addresses are still valid.
source:
PPR 57254 Rev 1.59 Table "Address Space Mapping under APB BUS"
Change-Id: If282ce5687b8a2bdae03ebfc5a37fe5b8b17647a
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Avinash Munduru <AvinashMunduru@amd.com>
Change-Id: I427186aa9f0fb0650b2ab8d6171a51a33edf2778
Tested-by: Avinash Munduru <Avinash.Munduru@amd.com>
Reviewed-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84384
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
HPET and MISC1/2 and registers are used interchangeably in the
datasheets. Add an alias to emphasise that they refer to the same.
source:
PPR #57396 Rev 3.10 Table "ValidValuesTable: PCI interrupt index list"
PPR #57254 Rev 1.59 Table "ValidValuesTable: PCI interrupt index list"
PPR #57396 Rev 3.10 FCH::IO::IntrMisc1Map and FCH::IO::IntrMisc2Map
PPR #57254 Rev 1.59 FCH::IO::IntrMisc1Map and FCH::IO::IntrMisc2Map
Change-Id: I64f685e507e1cd5ee90e1b18526b9d59ed4c1b34
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84574
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h
to static.h"), sources that require access to the devicetree should
directly include static.h so that it can be removed from device.h,
eliminating unnecessary dependencies on static.h for files that only
need the types and function declarations in device.h.
Change-Id: I9db5d80ca0a75ccff3b8e24db0ccbd6b36c84dcb
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This commit removes the unnecessary layer provided by soc_info.[hc].
It was providing an abstraction which only was resulting in extra
function calls without any added value as the returned constants are
well identified and could be used directly. More importantly, and this
is the actual selling point in my opinion, this extra indirection was
preventing the compiler from detecting array overflows.
BUG=348678529
TEST=Build is successful
Change-Id: Iea26d962748116fa84afdb4afcba1098a64b6986
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Intel TXT SINIT required the D_LCK bit set. Although coreboot
tries to set it, the bit ws still clear. The D_LCK bit has to be
set using I/O CF8/CFC cycle.
TEST=Boot Linux with tboot on Protectli VP4670 with Intel TXT enabled
Change-Id: I03aff482b53ab7b0bcaccf18e47ad4c22b53583c
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
|
|
The ACPI is adjusted based on SOFTWARE_CONNECTION_MANAGER, so set
the UPD to match this to avoid the connection type being mismatched.
If it's mismatched, the TBT port will timeout.
TEST=Boot starbook/rpl and check TBT 4 dock is correctly identified.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3ab68c01f682723dab39870f0676e59ae3d89add
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77567
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
