summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2018-06-08amd/stoneyridge: Set SCI_MAP for SCI enabled GPIOsDaniel Kurtz
By default we use a 1:1 mapping between GEVENT bits and the corresponding SCI_MAP entry. However, we still must program the SCI_MAP entries with the GEVENT number. BUG=b:109759838 TEST=(1) powerd_dbus_suspend (2) move finger on touchpad for ~1 second => system resumes from S3 Change-Id: Ie7be45264f9bfec56efc47a03071fdb924d16b6a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26930 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07soc/intel/common/pch: Add pch lockdown codeSubrata Banik
pch lockdown functionality can be used by supported PCH. Right now pch lockdown functionality is applied for SPT (Skylake SOC) and CNP(Cannon Lake SOC) PCH. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL and CNL platform. Change-Id: I0b81bbc54f737cb4e7120f44bbe705039b45ccb3 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07mediatek: Move uart, timer and cbmem code to a common directory.Tristan Shieh
This patch moves uart, timer and cbmem code which can be reused into a common directory under soc/mediatek. BUG=b:80501386 BRANCH=none TEST=the refactored code works fine on the new platform (with the rest of the patches applied) and Elm platform Change-Id: I5210149b324947ee90f1a481b42f0e2e1f7cfc25 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-06-07mediatek: Refactor to sharing code among similar SOCsTristan Shieh
This patch refactor cbmem and timer code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=the refactored code works fine on the new platform (with the rest of the patches applied) and Elm platform Change-Id: I397ebdc0c97c7616bd547022d2ce2a8f08f3c232 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26881 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07mediatek: Refine whitespace and formating changesTristan Shieh
This patch fix whitespace and formating issues: 1. Using two spaces between code and single line comment. 2. No space after asterisk. 3. Fix checkpatch error. 4. Remove spaces after cast operators. BUG=b:80501386 BRANCH=none TEST=the refactored code works fine on the new platform (with the rest of the patches applied) and Elm platform Change-Id: Ib36c99b141c94220776fab606eb36af8f64f65bb Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-06arch/x86: Always select RELOCATABLE_MODULESKyösti Mälkki
All boards except those with NO_RELOCATABLE_RAMSTAGE or explicit select already had this feature built. Change-Id: I838e12141243ec49c2555c09269e07476eb0cfad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-06arch/x86: Make RELOCATABLE_RAMSTAGE the defaultKyösti Mälkki
No need to provide an option to try disable this. Also remove explicit ´select RELOCATABLE_MODULES' lines from platform Kconfigs. Change-Id: I5fb169f90331ce37b4113378405323ec856d6fee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-06arch/x86: Flag platforms without RELOCATABLE_RAMSTAGEKyösti Mälkki
To flip the Kconfig default, flag some platforms with NO_RELOCATABLE_RAMSTAGE. Change-Id: I72c6d07e5a60789bbe0e068a0130d7e3bd07a1d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-06soc/intel/common/block: Move i2c common functions into block/i2cSubrata Banik
This patch cleans soc/intel/{apollolake/cannonlake/skylake} by moving common soc code into common/block/i2c. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL/CNL/APL platform. Change-Id: I88f2f836eee4f80b79486dd8644d1bb3826c5af1 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06soc/intel/common/block: Move gspi common functions into block/gspiSubrata Banik
This patch cleans soc/intel/{apollolake/cannonlake/skylake} by moving common soc code into common/block/gspi. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL/CNL/APL platform. Change-Id: I877c7c48af928ca1e0399ec794d9400bc52edfcb Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-06soc/intel/{cannonlake, skylake}: Select Gen-6 PCH binding for SKL/CNLSubrata Banik
This patch creates a glue layer between SOC and common block IPs in terms of PCH. All common IP blocks now can be selected based on SOC_INTEL_COMMON_PCH_BASE config option. BUG=none BRANCH=b:78109109 TEST=Build and boot Cannonlake RVP and EVE. Change-Id: I4e1f009489f2d8338ae94b78d7e9eb3f88a85d99 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06soc/intel/common/pch: Make infrastructure ready for pch common codeSubrata Banik
This patch is intended to make Intel common PCH code based on Gen-6 Sunrisepoint PCH (SPT). All common PCH code blocks between Gen-6 till latest-PCH should be part of soc/intel/common/pch/ directory. A SoC Kconfig might select this option to include base PCH package while building new SOC block. Currently majority of common IP code blocks are part of soc/intel/common/block/ and SoC Kconfig just select those Kconfig option. Now addition to that SoC might only selects required base PCH block to include those common IP block selections. BUG=none BRANCH=b:78109109 TEST=soc code can select PCH config option Change-Id: I2934e3b1aed9d692eb00df18ce69a7fcd3096f6b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06soc/intel/apollolake: Add missing entries to pmc_to_gpio_route for GLKFurquan Shaikh
This change adds missing entries in PMC to GPIO route mapping for GLK. BUG=b:77224247 Change-Id: I66cadaa23b8bd4518a199733c8fba81168e60323 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-06soc/intel/apollolake: Fix macro name for GPIO_GPE_NW group 2Furquan Shaikh
Bit 63 is part of GPIO_GPE_NW group 1 and group 2 starts from bit 64. This change corrects macro name to GPIO_GPE_NW_95_64 to reflect this. BUG=b:77224247 Change-Id: Ib94617ad102eea5084281f0dda3475e33d3a7833 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-05soc/intel/{apollolake, geminilake}: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization for APL and GLK. Change-Id: I9253af6f28bf694782c117296766fd8564dc2b14 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-05soc/intel/cannonlake: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization for CNL. Change-Id: Ia7da0842996a9db09e6e2b7b201b3a883c3887a2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-05soc/intel/skylake: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization. Change-Id: I8de24e662963f4600209ad1b110dc950ecfb3a27 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05soc/intel/skylake: Swap PCI devfn resides in same PCI deviceGaggery Tsai
After FSP-S, a device on PCI function n will be function swapped to function 0 if there is no device presnet on function 0. It needs some modification for DT and causes mismatches between software configuration and hardware schematic. This patch is from d779605, which swaps the devfn of the first enabled device in DT and function 0 resides in a PCI device. BUG=b:80105785 BRANCH=None TEST=Make sure the device is still enabled after coalescence with device on bus 0 and w/o device on bus 0. Test with suspend and resume and ensure it's consistent. Change-Id: Ibbc5d6e979977011f5904c8bd4b2f1be16bd23dc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/26479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-04soc/dmp: Drop leftover fileKyösti Mälkki
Change-Id: I6994b48b48fb7177b9ae32825dcd9af099b85410 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-04soc/broadcom/cygnus: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Id41279a1cdc7c68d3dcc44e238863f2f4a452499 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04src/soc: Get rid of whitespace before tabElyes HAOUAS
Change-Id: Ia024fb418f02d90c38b9a35ff819c607b9ac4965 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04soc/imgtec/pistachio: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ia36b4ef7d66c50a044bc51f452ac8b7c7ff14323 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04soc/marvell/mvmap2315: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I6db25850d46ea3a940ea2a6f263303d4b5304cb3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04soc/mediatek/mt8173: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ifadb894f98ce60cf0778de7fbcec67d125e48fd6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04soc/samsung: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ibf21100eb2232932ea52740bd5250319d3c9adfa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04soc/rockchip: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Idf47ea3b29c3fab7256d7a6722c7978594001d8d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04src: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ib2bb6cc80ac2bdc389c60c7ffac4bba937f0fca8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04soc/{amd,intel}: Use postcar_frame_add_romcache()Nico Huber
Change-Id: Iee816628ac3c33633f5f45798562a4ce49493a65 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-04soc/intel/denverton_ns: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I15e624b40d11f61a3870a6083be82d062690498d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-04soc/intel/skylake: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Idf00c029331aba30c8bfca71546cad62ff6bb0a7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26541 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04soc/intel/apollolake: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Id6bcf98892c1944ec9c7e637f63c4c05fe9a0c07 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-04soc/intel/braswell: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I05a46ab0ae6b4493895c1231fedb59c96efdf793 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-04soc/intel/fsp_broadwell_de: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I68c455d4bc524c2dd2d3ba87ab6641e70c78521c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-04soc/intel/fsp_baytrail: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I52534b67cd3cd8489925941f45a756b3d430e072 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-03soc/intel/apollolake: Add Page table mapping for System MemoryHannah Williams
Since we do not know before hand the memory range initialized by FSP memory init until it completes and as memory gets accessed from within FSP memory init to migrate FSP from CAR to memory, we need to add this mapping in coreboot. Change-Id: I1ce2d489240e6e3686ceb7f6e824e5a94398d47e Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/26745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-02soc/intel/common: Add edge trigger configuartion for IOAPIC IRQ modeAamir Bohra
Change-Id: I4e1f009489f2d8338ae94b78d7e9eb3f88a85daa Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/26730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-06-01soc/intel/cannonlake: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Iea56a6560bb23d48d19211304e57fc08e1c27fd6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26584 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-01soc/intel/broadwell: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I043f4169ad080f9a449c8780500332c9512b62ff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26583 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-01soc/amd/stoneyridge: Add ACPI device name lookupMarc Jones
Add the ACPI devices defined in ASL to the soc_acpi_name() lookup function. BUG=b:80280671 TEST=Add ACPI method to specific GPP bridge. Boot and verify method with ACPI dump. Change-Id: I5117e0d39db831364173c9c61ccdab6e34f18c59 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/26698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-05-31soc/intel/broadwell: decouple PEI memory struct from coreboot headerMatt DeVillier
Recent changes to field lengths in include/memory_info.h resulted in a mismatch between the memory_info struct the MRC blob writes to and the struct used by coreboot to parse out data for the SMBIOS tables. This mismatch caused type 17 SMBIOS tables to be filled incorrectly. The solution used here is to define the memory_info struct as expected by MRC in the pei_data header, and manually copy the data field by field into the coreboot memory_info struct, observing the more restrictive lengths for the two structs. Test: build/boot google/lulu, verify SMBIOS type 17 tables correctly populated. Change-Id: I932b7b41ae1e3fd364d056a8c91f7ed5d25dbafc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/26598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-31soc/{amd,intel}: Use CACHE_ROM_(BASE|SIZE)Nico Huber
Boards could choose a high ROM_SIZE that would result in an MTRR config that conflicts with other resources. Thus, always use the filtered CACHE_ROM_SIZE. Change-Id: I66d36b84ce49c1cb98cb36a4731977baaedf3225 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26575 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31{cpu,drivers,nb,soc}/intel: Use CACHE_ROM_BASE where appropriateNico Huber
Change-Id: Ibc2392cd2a00fde3e15dda4d44c8b6874d7ac8a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-31soc/intel/skylake: Select common P2SB codeSubrata Banik
This patch select CONFIG_SOC_INTEL_COMMON_BLOCK_P2SB to include common p2sb code block. BUG=b:78109109 BRANCH=none TEST=Build and boot EVE. Change-Id: I3f6aa6398e409a05a35766fb7aeb3aa221dd3970 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26165 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-30soc/intel/cannonlake: Enable IDT and expection handling support for all stagesAamir Bohra
Change-Id:I4146a040e5e43bed7ccc6cb0a7dc2271f1e7a8ea Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/26661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-29src/soc: Add and update license headersMartin Roth
This change adds and updates headers in all of the soc files that had missing or unrecognized headers. After this goes in, we can turn on lint checking for headers in all soc directories. Change-Id: I8b34dcd10c692f1048bd8d6c0fe3bfce13d54967 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-28fsp_broadwell_de: Select TSC_MONOTONIC_TIMER by defaultDavid Hendricks
This is currently selected by each derivative board's Kconfig even though it's really an SoC-specific option. Change-Id: Iad135261915a0857c53c18aaebde7e46c97a8f40 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/26344 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-28intel/skylake: nhlt: Update Max98373's capture formatSathyanarayana Nujella
Max98373's NHLT capture configuration is used for IV feedback for DSM algorithm. Feedback is 4-channel data. Without this configuration below error is seen in dmesg: [ 315.784250] snd_soc_skl 0000:00:1f.3: Blob NULL for id 0 type 3 dirn 1 [ 315.784263] snd_soc_skl 0000:00:1f.3: PCM: ch 4, freq 48000, fmt 32 So, update nhlt configuration accordingly. BUG=b:79362472 TEST=Audio playback works with IV feedback enabled Change-Id: I75434a63fe030ed9bb963c6d300d833a8e7d2d66 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26384 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-28soc/intel/quark: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I102c9b9b1066064589149388d5ebbcd6d0d81fa7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-28soc/qualcomm: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ib7bcfefaecc053a1ed28d708a614acb81207bccf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-28soc/nvidia: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I065ed3a0deab2f59e510717f5d52beb2a62e900d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-27soc/intel/cannonlake: Select common XHCI codeSubrata Banik
This patch select CONFIG_SOC_INTEL_COMMON_BLOCK_XHCI to include common xhci code block. BUG=b:78109109 BRANCH=none TEST=Build and boot cnlrvp Change-Id: I7f1e59792159dae5835fbbe7fcb1604fc01893ba Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-27grunt: Wire up the EC SMI handlerRaul E Rangel
This won't actually get called yet since the GPIO pin has not been configured as SMI. BUG=b:80295434 TEST=grunt: Made sure events could be processed. Change-Id: I189e26196e4543b3e34bff5d9df8566eff07d585 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-27amd: Don't call halt() when in SMMRaul E Rangel
This copies what Intel does. BUG=b:80295434 TEST=grunt: Made sure that the S5 SMI interrupt gets fired. Change-Id: I7874824cad01054c6bdeff12d248e671f27be030 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-27stoneyridge GPIO: Create and use PAD_INT for interrupt pinsRichard Spiegel
The default interrupt control for GPIO pins within stoneyridge is for edge triggered, high. However, sometimes these need to change, or maybe the interrupt needs to be reported or delivered. This was the case of platform grunt, where the interrupt related bits were being changed afterwards. Ideally all the bits should be programmed through the same procedure. Create several PAD_INT definitions (for general configuration, for trigger configuration and for interrupt type configuration) and change function sb_program_gpios() to accept the output from PAD_INT_XX and program all the necessary bits while keeping compatibility with other PAD_XX definitions. BUG=b:72875858 TEST=Add code to report GPIO and interrupt configuration, build grunt and record a baseline. Add new code, rebuild grunt and record a test output. Compare baseline against test, there should be no change in GPIO or interrupt programming. Remove code that reports GPIO/interrupt configuration. Change-Id: I3457543bdf64ec757fd82df53c83fdc1d03c1f22 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-25soc/amd/stoneyridge: Increment boot_count on non-S3 bootsDaniel Kurtz
Increment the boot_count from romstage when not resuming from S3. BUG=b:80266624 TEST=firmware_EventLog TEST=boot, then: mosys eventlog list | grep boot 1 | 2018-05-24 16:51:42 | System boot | 1 reboot mosys eventlog list | grep boot 1 | 2018-05-24 16:51:42 | System boot | 1 6 | 2018-05-24 16:52:34 | System boot | 2 Change-Id: Ideec9da809e494fb0ea073f648540285972f8238 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26525 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25soc/amd/stoneyridge: Record ACPI Wake events in ELOGDaniel Kurtz
We are already reporting the Wake source, but we must also report the ACPI wake itself. BUG=b:79865267 TEST=firmware_EventLog Change-Id: Id26dff46379800a63ab9b77f135d23c6382f77e6 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26522 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25soc/intel/cannonlake: Reduce STACK_SIZE to 4KiBSubrata Banik
TEST=Build and boot cannonlake rvp till OS. Change-Id: I5369afd0d1d66e25d210416730a2c1c91ca8e94a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-24soc/intel/baytrail: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I8b2cfe3e2090fb8eed755e40d337c6049d8dd96e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24src: Remove space after `defined`Elyes HAOUAS
Change-Id: If450a68e98261ffba4afadbce47c156c7e89e7e4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26460 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-23mb/google/kahlee/dsdt.asl: Add method _SWSRichard Spiegel
_SWS is the recommended method of wake source retrieval. Now that PM1I and GPEI are available at NVS, add the method _SWS to kahlee/grunt ACPI code. BUG=b:76020953 TEST=Build grunt Change-Id: I5930438af40e6f9177462582cafb65401d9c60f4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-23stoneyridge: Store wake parameters in NVSRichard Spiegel
ACPI _SWS needs information on PM1 and ACPI events (though events can be read directly). Unfortunately PM1 is cleared in normal path and in resume path. Save PM1 and ACPI events in NVS to be accessed by ACPI _SWS. BUG=b:75996437 TEST=Build and boot grunt recording serial. Run suspend stress test, after 3 resumes closed file and examined for the message indicating what was being saved to NVS. Two different path, normal boot (first boot) and resume path had different PM1. Change-Id: If3b191854afb27779b47c3d8d9f5671a255f51b5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26208 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-23soc/amd/common/block/pci: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I82089475eb43d58303d1091f35aee06f1f04b4a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-05-23soc/amd/stoneyridge/: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I84fbc90b2a81fe5476d659716f0d6e4f0d7e1de2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-05-22soc/intel/apollolake: Bypass FSP's CpuMemorytest, PCIe pwr seq & SPI InitSrinidhi N Kaushik
CpuMemoryTest in FSP tests 0 to 1M of the RAM after MRC init. With PAGING_IN_CACHE_AS_RAM enabled for GLK, there was no page table entry for this range which caused a page fault. Since this test is anyway not exhaustive, we will skip the memory test in FSP. There is an option to do PCIe power sequence from within FSP if provided with the GPIOs used for PERST to FSP. Since we do this from coreboot, will skip the PCIe power sequence done by FSP. FSP does not know what the clock requirements are for the device on SPI bus, hence it should not modify what coreboot has set up. Hence skipping SPI clock programming in FSP. CQ-DEPEND=CL:*627827 BUG=b:78599939, b:78599576, b:76058338 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I4fa7a73fbb4676bb7af2416c8a33bf10ef41dd53 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/26284 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22soc/nvidia/tegra(124|210): Add distclean targetsMartin Roth
Add distclean targets so these can be called by the junit.xml test target needed for jenkins testing. Change-Id: I5991b43503da1778a6d74a57fbc0daf862e570d7 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/26433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-22amd/stoneyridge: Increase SMM reserved memoryMarshall Dawson
Add 64KB to the reserved memory used for stage_cache. This corrects an error observed when using a debug build of the AGESA blob. Messages on initial boot AGESA: Saving stage to cache Error: Can't add stage_cache 57a9e101 to imd and during resume AGESA: Loading stage from cache Error: Can't find stage_cache 57a9e101 in imd TEST=boot/suspend/resume Grunt with debug and release builds BUG=b:79154155 Change-Id: I3f27059fcef37e335d0301142ba4dedb3809e369 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/26386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22src: Remove non-ascii charactersMartin Roth
Change-Id: Iedb78e24a286a51830c85724af0179995ed553be Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-22rk3399: Enable bootblock compressionJulius Werner
This patch enables the new bootblock compression feature on RK3399, which requires moving MMU initialization into the decompressor stage and linking the decompressor (rather than the bootblock) into the entry point jumped to by the masked ROM. RK3399's masked ROM seems to be using a bitbang SPI driver to load us (very long pauses between clocking in each byte), with an effective data rate of about 1Mbit. Bootblock loading time (as measured on a SPI analyzer) is reduced by almost 100ms (about a third), while the decompression time is trivial (under 1ms). Change-Id: I48967ca5bb51cc4481d69dbacb4ca3c6b96cccea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-22bootblock: Allow more timestamps in bootblock_main_with_timestamp()Julius Werner
This patch adds more parameters to bootblock_main_with_timestamp() to give callers the opportunity to add additional timestamps that were recorded in the platform-specific initialization phase. Change-Id: Idf3a0fcf5aee88a33747afc69e055b95bd38750c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-19cpu/x86: Add support to run function on single APSubrata Banik
This patch ensures that user can select a specific AP to run a function. BUG=b:74436746 BRANCH=none TEST=Able to run functions over APs with argument. Change-Id: Iff2f34900ce2a96ef6ff0779b651f25ebfc739ad Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26034 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-19soc/intel/cannonlake: Add CONFIG_SMM_RESERVED_SIZE configSubrata Banik
This patch ensures to make SMM_RESERVED_SIZE for cannonlake platform else smm_subregion() returns 0 size. Change-Id: I6a95a244bbcf40d672fd11d1c62e01224b2554f2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-05-18soc/amd/stoneyridge: Support ACPI USB code generationDuncan Laurie
To support generating USB devices in ACPI the platform needs to know how to determine a device name for each USB port, and for any root hubs that may be present. The AMD Stoney Ridge platform has separate controllers for USB 2.0 and USB 3.0. The USB 2.0 ports are connected through a hub to an EHCI controller while the USB 3.0 ports are directly connected to the xHCI controller. This topology is described in ACPI and the port names are exposed by the soc_acpi_name() function. The USB controllers are configured to scan for static USB devices in the devicetree and use the soc_acpi_name() function to identify them. Change-Id: I2bb677f84a49d2531929985dba319455b88e1686 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-18soc/intel: Add support for USB ACPI code generationDuncan Laurie
To support generating USB devices in ACPI the platform needs to know how to determine a device name for each USB port, and for any root hubs that may be present. Recent Intel platforms route all ports to an XHCI controller through a root hub. This is supported by considering the root hub to be USB port type 0, the USB 2.0 ports to be type 2, and the USB 3.0 ports to be type 3. This was tested with a Kaby Lake platform by adding entries to the devicetree and checking the resulting SSDT. Change-Id: I527a63bdc64f9243fe57487363ee6d5f60be84ca Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-17soc/intel/skylake: Fix AP timeout issue while executing sgx_configureSubrata Banik
Increase AP timeout limit for sgx_configure function. As per debug log sgx_configure was not successful on all cores with given timeout value. TEST=Ensures no timeout error in AP function execution. Change-Id: Ia83f7a7eb6cd6c4808d55febfebe32724a633173 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com>
2018-05-15soc/intel/skylake: check DPTF_TSR1_ACTIVE_AC* in _ACx methodsJohn Su
Because thermal table is not included the values of DPTF_TSR1_ACTIVE_AC from internal nami/vayne thermal team. Add conditional compilation in _ACx methods if DPTF_ENABLE_FAN_CONTROL is defined in the dptf.asl. BUG=b:72974136 TEST=Match the result. Change-Id: I4b593118ca460a59aa49786cb99df417d135112a Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-15soc/intel/apollolake: add rt5682 NHLT supportNaveen Manohar
Add APIs and required parameters for creating Realtek 5682 SSP endpoint in NHLT table. BUG=b:79235534 TEST=check that NHLT table defined is created properly. With the series merged & required driver support in kernel. Verify Headset Audio playback. Change-Id: Ic26a0b881f77af64ba00fd714b08c0f17c0acb3d Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/26057 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-14soc/intel/denverton_ns: Enable common code for CPUJulien Viard de Galbert
Change-Id: Ib215aa17dd20112946b74a1b63ce8a735388873c Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/24927 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-14soc/intel/denverton_ns: port gpio to intelblockJulien Viard de Galbert
The intelblock code is common code already used by appololake and cannonlake platform. The denverton platform also use a similar gpio controller so the intelblock code can be used as well. Change-Id: I7ecfb5a3527e9c893930149f7b847a41c5dd9374 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/24928 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-14soc/intel/denverton_ns + mb: Rename gpio configurationJulien Viard de Galbert
In order to use the shared code in intelblock, this patch renames the denverton specific implementation to not use the same names (for files and types). - rename pad_config to remove conflict with soc/.../intelblocks/gpio.h - rename gpio.c, soc/gpio.h to not conflict with intelblock Note: There is no functional change in this patch. Change-Id: Id3f4e2dc0a118e8c864a96a435fa22e32bbe684f Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/24926 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-14cpu/x86: Add support to run function with argument over APsSubrata Banik
This patch ensures that user can pass a function with given argument list to execute over APs. BUG=b:74436746 BRANCH=none TEST=Able to run functions over APs with argument. Change-Id: I668b36752f6b21cb99cd1416c385d53e96117213 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-14grunt: use stage cache when waking from S3Raul E Rangel
BUG=b:79154155 TEST=built and tested on grunt 31 entries total: 0:1st timestamp 20,917 900:calling AmdInitReset 87,525 (66,608) 901:back from AmdInitReset 98,318 (10,793) 902:calling AmdInitEarly 99,165 (847) 903:back from AmdInitEarly 139,619 (40,454) 5:start of verified boot 156,301 (16,682) 503:starting to initialize TPM 156,697 (396) 504:finished TPM initialization 186,107 (29,410) 505:starting to verify keyblock/preamble (RSA) 187,316 (1,209) 506:finished verifying keyblock/preamble (RSA) 208,000 (20,684) 507:starting to verify body (load+SHA2+RSA) 208,108 (108) 508:finished loading body (ignore for x86) 273,238 (65,130) 509:finished calculating body hash (SHA2) 290,364 (17,126) 510:finished verifying body signature (RSA) 294,236 (3,872) 511:starting TPM PCR extend 295,071 (835) 512:finished TPM PCR extend 320,512 (25,441) 513:starting locking TPM 320,514 (2) 514:finished locking TPM 332,081 (11,567) 6:end of verified boot 332,083 (2) 13:starting to load romstage 332,187 (104) 4:end of romstage 395,559 (63,372) 10:start of ramstage 395,999 (440) 916:calling AmdS3LateRestore 396,135 (136) 917:back from AmdS3LateRestore 428,066 (31,931) 30:device enumeration 428,087 (21) 40:device configuration 434,640 (6,553) 50:device enable 438,185 (3,545) 60:device initialization 439,565 (1,380) 70:device setup done 453,326 (13,761) 918:calling AmdS3FinalRestore 454,363 (1,037) 919:back from AmdS3FinalRestore 455,520 (1,157) 98:ACPI wake jump 467,541 (12,021) Total Time: 446,624 Change-Id: I326e81d3c987130e258c616c7c66dd82ddc0d942 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26219 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09drivers/intel/gma, soc/intel/common: improve cooperationPatrick Georgi
Instead of both featuring their own VBT loaders, use a single one. It's the compression-enabled one from soc/intel/common, but moved to drivers/intel/gma. The rationale (besides making all the Kconfig fluff easier) is that drivers/intel/gma is used in some capacity on all platforms that load a VBT, while soc/intel/common's VBT code is for use with FSP. BUG=b:79365806 TEST=GOOGLE_FALCO and GOOGLE_CHELL both build, exercising both affected code paths. Change-Id: I8d149c8b480e457a4f3e947f46d49ab45c65ccdc Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/26039 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09sdm845: Add DRAM resourcesT Michael Turney
TEST=build Change-Id: Icf934caf8b4584ef2633054a5cc7f5be7cc734ee Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-05-09vendorcode/amd/pi/00670F00: Control which procedure buildsRichard Spiegel
Vendor code is compiled as a library, thus the whole library is included into the final image. However, not all procedures are required, they are there because original AGESA code had them. We cannot remove them, in order to facilitate porting of fixed AGESA code. Therefor add #if throughout the code to allow the control if unneeded procedures will be build. BUG=b:78610011 TEST=Build and boot grunt; build kahlee and gardenia. Change-Id: I68f9e359b2331f715a3b85486c4181866985afdf Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26135 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-08amd/common/pi: Insert missing newline in printkMarshall Dawson
Add a newline to the unsupported callout message. Change-Id: I9bfff0ed920843f6c0818b51ee0046366f2a5c8d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/26144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-08soc/intel/skylake: Support PCH UART 0 and 1 for consoleDuncan Laurie
The current PCH UART support for console is limited to UART2. This change adds support for specifying UART0 or UART1 to be used instead by changing CONFIG_UART_FOR_CONSOLE in the board level Kconfig. The default is still 2. This is tested with a board that uses UART0 for debug output. Change-Id: I91323ed3298f9b2558764aa4b54173833c021a7b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/26140 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-08soc/intel/fsp_broadwell_de: Spell verb *set up* with spacePaul Menzel
Change-Id: If2e66f3531696d430b3ae133c4b7ec0d929713b7 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/26129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-08soc/intel/denverton_ns: Fill dimm info for SMBIOS table 17Julien Viard de Galbert
Rework display_fsp_smbios_memory_info_hob (shared code). Import code to convert memory HOB to dimm info for SMBIOS table 17 mostly copied from fsp1_1 mainboard_save_dimm_info. Change-Id: Id5c4ceaf4e65359f72ec764f0914b5daa82f257e Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23851 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-08{mb,nb,soc}: Remove references to pci_bus_default_ops()Nico Huber
pci_bus_default_ops() is the default anyway. Change-Id: I5306d3feea3fc583171d8c865abbe0864b6d9cc6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-08intel/broadwell: Add option to enable/disable the PCIe AER capabilityYouness Alaoui
The Advanced Error Reporting capability was hardcoded in the PCIe extended capability list, but it might not always be possible. The Librem 13v1 does not seem to have working AER and this option was needed and tested on the Librem 13v1. Without it, the linux console gets spammed with AER errrors. Change-Id: If2e0ec42c93f1fee927eacdf0099004cf9302fbe Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-08intel/broadwell: If L1 Sub state is disabled, do not set capabilityYouness Alaoui
I finally found out why disabling the L1 sub state option did not prevent some NVMe drives from locking up in L1 substate. I expect that the disabled L1 substate initialization that coreboot does is negated because Linux might itself configure it if it finds the capability enabled on the PCIe root port. Removing the capability from the PCIe root port when L1 sub states are disabled in the configuration should fix the problem. This was not tested because it's a difficult issue to reproduce and I do not have the problematic hardware that caused it anymore. Change-Id: I293a650db307e77cee024a43fbfc81e1d8c86265 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-05intel/acpi: Fix ACPI compile errorLijian Zhao
According to ACPI 6.1 spec 19.6.44, External informs compiler that object is external to this TABLE, no necessary for object in same DSDT tables. BUG=None TEST=Build pass Intel mainboard with 20180427 iasl. Change-Id: I153e7d0e97f9a29919676fbb73a7c26fd22f252c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/26045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-05soc/intel/cannonlake: Include stage cache support for CNLSubrata Banik
TEST=Build and boot cannonlake rvp. cpu_index() returns correct cpu index based on caller. Change-Id: I23f80ef455d075a14121577f401cfc7c44ba0cfa Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-05soc/intel: Add KBL-R pci id supportLijian Zhao
Add KBL-R internal graphics device pci ids into coreboot. BUG=N/A TEST=Boot up fine on kabylake-r platform with display on. Change-Id: I0813247624770b70fe8b3ec3825fd17a9878cd0e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/26018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@chromium.org>
2018-05-05fsp_broadwell_de: Add option to enable EHCI controllersDavid Hendricks
Change-Id: I74ee9448923015ac5ec3eec770669f3491a375ba Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/26042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-04soc/intel/common: Allow exporting the size of the VBTPatrick Georgi
Change-Id: Ib340aad846ea7cb61d650928b495efaa1fc2d641 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/26038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-04soc/intel: unify VBT fetching APIPatrick Georgi
Skylake used the inner function, wrapping it in the same set of tests as the common code does, but expressed differently. Change-Id: Ifa6912255e7874a6e80301d49128adda6f624209 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/26037 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-04soc/amd/stonyridge: Add misc deviceAkshu Agrawal
oscout system clock is present in FCH misc device. The kernel acpi misc driver will use the resource to register oscout system clock. BUG=b:74570989 TEST=Tested clock enable/disable in kernel driver Change-Id: Ia90d3abab447fb5d27f454d9d6c33d0b5c3a0f16 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/25918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 19:18:36 +0000