summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2017-11-30acpi/tpm: remove non-existent IRQ for Infineon TPM chipMatt DeVillier
The Infineon TPM chip used on these platforms doesn't use an IRQ line; the Linux kernel has been patched to work around this, but better to remove it completely. Test: boot linux on google/wolf,lulu,cyan without tpm_tis.interrupts=0 kernel parameter, observe no abnormal delays in boot or resume from S3. Change-Id: Id510c73cfdc14b7f82b0cc695691b55423185a0b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30acpi/tpm: update TPM preprocessor guardsMatt DeVillier
Replace '#ifdef ENABLE_TPM' with '#if IS_ENABLED(CONFIG_LPC_TPM)' for platforms which use a TPM on the LPC bus, so that the TPM ACPI code isn't included when the Kconfig option is deselected. Change-Id: Ia4c0d67dd3b044fe468002dff9eeb4f75f9934f9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-11-30soc/intel/skylake: Set low maximum temperature threshold for Thermal DeviceSubrata Banik
PMC logic shuts down the thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in S0ix is enabled. BUG=b:69110373 BRANCH=none TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)] value is 0xFA. Change-Id: I94d09a28bf1ea07a53cfa04c54752358bafca610 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-30soc/intel/{APL,GLK}: Use Intel SRAM common codeV Sowmya
TEST:Build and boot reef. Verified that SRAM common code is used to set the resources. Change-Id: If9f5d400df09b4a0aa4b464d7f1f24320696b0aa Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/22608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-30soc/intel/common: Add Intel SRAM common code supportV Sowmya
Add SRAM code support in intel/common/block to read and use fixed resources on BAR0 and BAR2 for SRAM. Change-Id: I7870a3ca09ac7b57eb551d5eb42d8361d22f362a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/22607 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28soc/intel/skylake: Make use of Intel common DSP blockSubrata Banik
TEST=Build and boot soraka/eve. Change-Id: I8be2a90dc4e4c5eb196af57045d2a46b7f0c9722 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28intel/common/block: Add SKL CSME device IDSubrata Banik
This patch ensures SKL code is using CSME common PCI driver. TEST=Build and boot soraka/eve. Change-Id: Ic229c60e434d83eb4a3e5392ce90a7d47fddbd73 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-23soc/intel/cannonlake: Add PM methods to power gate SD card controllerVaibhav Shankar
When system enters S0ix, system fails to power gate SD card controller. This patch implements PM methods to put the SD card controller in D3 during S0ix entry. TEST=Suspend and resume using 'echo freeze > /sys/power/state'. The System should not be blocked by sd card controller. Change-Id: I9a9fe14fb6cd3b76ee95c565b3359cdae1a3c445 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/22487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-11-23soc/intel/cannonlake: Invoke pmc and hard reset only if CSE fails to resetJohn Zhao
If CSE fails to do a global reset with the calling sequence of heci reset/send/receive, then invoke pmc and hard reset. TEST= Force global reset from early or late romstage. The function send_heci_reset_message has the calling sequence of heci reset/send/receive. It is observed timed out error (associated with heci_receive) occurs only if global reset is forced during early romstage. If global reset is trigged at late stage (i.e, after fsp_memory_init), then no timed out error and CSE handles reset properly. Change-Id: I5bb12554e5745d7704a1b684a3a51034bb35f787 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22549 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-23Constify struct cpu_device_id instancesJonathan Neuschäfer
There is currently no case where a struct cpu_device_id instance needs to be modified. Thus, declare all instances as const. Change-Id: I5ec7460b56d75d255b3451d76a46df76a51d6365 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-21src/soc/intel/apollolake: move TCO1 disable into bootblockVadim Bendebury
Cr50 reset processing could take long time, up to 30 s in the worst case. The TCO watchdog needs to be disabled before Cr50 driver starts, let's disable it in bootblock. BRANCH=none BUG=b:65867313, b:68729265 TEST=verified that resetting the device while keys are being generated by the TPM does not cause falling into recovery. Change-Id: Iaf1f97924590163e45bcac667b6c607503cc8b87 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-20soc/intel/cannonlake: Add ACPI workaround for EMMCLijian Zhao
Two W/A had been added here for EMMC to make it working properly. 1. Enable power gating after D3 entry, disable power gating before D0 entry. 2. Add 50 ms delay to ensure Rcomp calibration done before EMMC out of D3. BUG=b:69323943 TEST=Run multiple ACPI S3 cycles on cannonlake u LPDDR4 platform. Change-Id: Ic6e98264521fb02b911a8c157a7982afa35fe20c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-17soc/intel/cannonlake: fix gpio pin numbersBora Guvendik
Update pin numbers to match kernel cannonlake pinctrl driver. TEST=boot to OS Change-Id: Id65736db03200fd434dd9292ce081727abd6832b Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22477 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-17soc/intel/cannonlake: Add cpu.asl fileShaunak Saha
This patch adds the cpu.asl file in cnl. We are only defining the PNOT method here in this patch as this is needed by the ec/google/chromeec/acpi/ec.asl file for the AC methods. TEST= code compiles and boots when we include the ec.asl file. Change-Id: Id93012833fac116d4d7514aa2d0b8493d2f666a9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-11-15soc/intel/skylake: Make use of common CSE code for skylakeSubrata Banik
TEST=Ensures global reset could able to reset system. Change-Id: I11ce1812a5a0aa2da6b414555374460d606e220e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-15soc/intel/common: Use HOST_CSR to get circular Buffer DepthSubrata Banik
As per CSME BWG section 3.4.4. The Circular Buffer Depth can find by checking B0:D22:F0 MMIO_HOST_CSR register. TEST=Build and boot eve/soraka/reef/cnl-rvp Change-Id: I1d3c09077e040b5c32b3c8be867a07f392ea4e1c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-15soc/intel/common: Add HECI message retry countSubrata Banik
Send/Receive HECI message with 5 retry count in order to avoid HECI message failure. TEST=Build and boot eve/soraka/reef/cnl-rvp Change-Id: I76662f8080fe312caa77c83d1660faeee0bdbe7e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22443 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-15soc/intel: Enable ACPI DBG2 table generationDuncan Laurie
Enable the ACPI DBG2 table generation for Intel boards. This is a Microsoft defined ACPI extension that allows an OS to know what the debug port is on a system when it is not enabled by the firmware, so it does not show up in the coreboot tables and cannot be easily found by a payload. broadwell: Use byte access device, set up only when enabled since it relies on the port being put in byte access mode and using this serial port for debug was not standard in this generation. skylake: Enable for the configured debug port. Skylake uses intelblocks for UART but not ACPI. common: Enable for the configured debug port. This affects apollolake and cannonlake. Tested by compiling for apollolake/broadwell, tested by reading the DBG2 ACPI table on kabylake board and using IASL to dump: [000h 0000 4] Signature : "DBG2" [004h 0004 4] Table Length : 00000061 [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 3B [00Ah 0010 6] Oem ID : "CORE " [010h 0016 8] Oem Table ID : "COREBOOT" [018h 0024 4] Oem Revision : 00000000 [01Ch 0028 4] Asl Compiler ID : "CORE" [020h 0032 4] Asl Compiler Revision : 00000000 [024h 0036 4] Info Offset : 0000002C [028h 0040 4] Info Count : 00000001 [02Ch 0044 1] Revision : 00 [02Dh 0045 2] Length : 0035 [02Fh 0047 1] Register Count : 01 [030h 0048 2] Namepath Length : 000F [032h 0050 2] Namepath Offset : 0026 [034h 0052 2] OEM Data Length : 0000 [036h 0054 2] OEM Data Offset : 0000 [038h 0056 2] Port Type : 8000 [03Ah 0058 2] Port Subtype : 0000 [03Ch 0060 2] Reserved : 0000 [03Eh 0062 2] Base Address Offset : 0016 [040h 0064 2] Address Size Offset : 0022 [042h 0066 12] Base Address Register : [Generic Address Structure] [042h 0066 1] Space ID : 00 [SystemMemory] [043h 0067 1] Bit Width : 00 [044h 0068 1] Bit Offset : 00 [045h 0069 1] Encoded Access Width : 03 [DWord Access:32] [046h 0070 8] Address : 00000000FE034000 [04Eh 0078 4] Address Size : 00001000 [052h 0082 15] Namepath : "\_SB.PCI0.UAR2" Change-Id: If34a3d2252896e0b0f762136760ab981afc12a2f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/22453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-15soc/intel/cannonlake: Fix and clean up xhci ACPI codeVaibhav Shankar
During S3 cycling, system entered S3 only once and falied to enter S3 the second time. The system gets stuck at this point and we have to do a cold reboot to restore the system. Since XHCI IP is able to power gate during kernel freeze/suspend, this patch removes unnecessary device gating from ASL. This helps in continuous cycling of S3. BUG=b:69115421 TEST=run powerd_dbus_suspend multiple times and check if the system enters and resumes from S3. Change-Id: Id459631ea2d32feea4b8f658fd34fa25945f909e Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/22389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-13soc/intel/common: Add error print in common i2cLijian Zhao
Print error message when using common i2c without default clock defined. TEST=Do not define default clock in Kconfig, compile will stop for assertion. Change-Id: I803f97698b3928e6b64df0010e71a6ded1400f87 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-11-13soc/intel/cannonlake: Define default LPSS clockLijian Zhao
Default LPSS clock need to be defined for SOC. TEST=Turn on COMMON_I2C_DEBUG, add I2C clock entry and check I2C programing properly during coreboot. Change-Id: I2c6b9bb23950b09f6f05e3ef762ccb1a260efc5f Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/apollolake: Make use of Intel SPI common blockSubrata Banik
TEST=Build and boot reef Change-Id: I1bb22ef1737b9e35892294ec0d66df39c546d72e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/apollolake: Add support for SPI deviceSubrata Banik
Provide a translation table to convert SPI device structure into SPI bus number and vice versa. Change-Id: I4c8b23c7d6f289927cd7545f3875ee4352603afa Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/cannonlake: Make use of Intel SPI common blockSubrata Banik
TEST=Build and boot RVP Change-Id: I5ff9867f08e43016a797b1b3719053df0c382174 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/skylake: Make use of Intel SPI common blockSubrata Banik
TEST=Build and boot soraka/eve Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I10de3ff75a3b063c4c46471e380bbbe2630c35f3 Reviewed-on: https://review.coreboot.org/22361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/{cannonlake,skylake}: Add _soc_ prefix in spi soc routineSubrata Banik
This ensures that function callback into the SoC code. Change-Id: Idc16d315ba25d17a2ab537fcdf0c2b51c8802a67 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/common/block: Add Intel common SPI supportSubrata Banik
SOC need to select specific macros need to compile common SPI code. Change-Id: I82f7d1852d12ca37f386b64a613a676753da959c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-10soc/intel/cannonlake: Remove structure variable initialization with 0Subrata Banik
Variable without an initializer will default to 0 hence no need of an explicit initialization. Change-Id: I208d5e475600b102cd3d972919b170c10c790b32 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-10soc/intel/common: Fix CSE common code to accomodate Skylake/KabylakeSubrata Banik
This patch ensures Skylake/Kabylake soc can make use of common CSE code in order to perform global reset using HECI interface. TEST=Build and boot on soraka/eve/reef/cnl-rvp Change-Id: I49b89be8106a19cde1eb9b488ac660637537ad71 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-10soc/intel/apollolake: Include HECI BAR0 address inside iomap.hSubrata Banik
This ensures HECI1_BASE_ADDRESS macro is coming from respective SoC dirctory and not hardcoded inside common cse code. As per firmware specification HECI1_BASE_ADDRESS might be different between different socs. Change-Id: I502b5b41b449bb07f14f07435bf311bbd4f943b6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-07soc/intel/kabylake: Add Dialog da7219 NHLT blob supportNaveen Manohar
Add APIs and required parameters for creating Dialog da7219 SSP endpoints in NHLT table. The use of a NHLT table is required to make audio work on the kabylake SoCs employing the internal DSP. The table describes the audio endpoints (render vs capture) along with their supported formats. BUG=b:68686020 TEST=check that NHLT table for da7219 is created properly Change-Id: I57b88873f1c59c8aadf8eec3c80a9d95165a2cc3 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/22324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-07src: Fix all Siemens copyrightsMario Scheithauer
Some Siemens copyright entries incorrectly contain a dot at the end of the line. This is fixed with this patch. Change-Id: I8d98f9a7caad65f7d14c3c2a0de67cb636340116 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07soc/intel/denverton_ns: re-factor HSIO configurationJulien Viard de Galbert
The main goal is to allow configuring the HSIO lines from the mainboard code. Also share the code for both romstage and ramstage. Remove explicit dependency on the harcuvar mainboard. Change-Id: Iec65472207309eae878d14eef5bc644b80fdbb1d Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/22309 Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-04soc/intel/cannonlake: Add DSP supportLijian Zhao
Add dsp driver support for cannonalake, especially the scan_bus function of Audio controller required. TEST=N/A Change-Id: I573fecedbd4d6619112765c3f2f8baccabeb5ac5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2017-11-04soc/intel/cannonlake: Install common i2cLijian Zhao
Add common i2c support for cannonlake. TEST=N/A Change-Id: I5c60b0579f9e6050308896dcb13dda0bbb724d2b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22238 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-04soc/intel/apollolake: Fix nhlt blobs path for GLKHannah Williams
Change-Id: Iabea32654918575c952857145ee6edb165899baf Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-04sb and soc: Enforce correct offset of member "chromeos" in global_nvs_tJonathan Neuschäfer
The padding has recently been broken in commit 90ebf96df5 ("soc/intel/skylake: Add GNVS variables and include SGX ASL") and fixed again in commit af88398887 ("soc/intel/skylake: Fix broken GNVS offset for chromeos"). Avoid this bug in the future. Change-Id: I1bf3027bba239c8747ad26a3130a7e047d3b8c94 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-04soc/intel/skylake: Update coding style for i2cLijian Zhao
From comment from https://review.coreboot.org/#/c/22238/, the coding style need to be update. TEST=N/A Change-Id: Id022648951c0f11216aa32f422b5095476f82f8c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-04soc/intel/apollolake: Move to common dsp driverLijian Zhao
Move dsp driver implementation to common dsp driver. TEST=Boot up and check dsp driver loaded or not in OS. Change-Id: Ia2be1c9f18e0e110600bd56a0b6cb8d40ca5e01f Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04soc/intel/common: Add common dsp driverLijian Zhao
Audio DSP pci driver can be common across different platforms. TEST=N/A. Change-Id: Ia9206657864b8795799dc71af54996017c1eec57 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22232 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2017-11-03soc/intel/quark/spi: Correct conversion specifierPaul Menzel
Use the correct conversion specifier for `size_t` to fix the error below. ``` from src/soc/intel/quark/spi.c:18: src/soc/intel/quark/spi.c: In function 'xfer': src/soc/intel/quark/spi.c:107:20: error: format '%ld' expects argument \ of type 'long int', but argument 3 has type 'unsigned int' \ [-Werror=format=] printk(BIOS_ERR, "bytesin > %ld\n", sizeof(ctrlr->data)); ^ ``` Found-by: gcc (Debian 7.2.0-8) 7.2.0 Change-Id: I3974d116e85715086a2bd5533a80a20c4cc43303 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/22130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-03soc/intel/common/block/lpc: Make integer literal unsigned longPaul Menzel
``` CC romstage/soc/intel/common/block/*/lpc_lib.o src/soc/intel/common/block/lpc/lpc_lib.c:91:17: warning: The result of the '<<' expression is undefined alignment = 1 << (log2_ceil(window_size)); ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ ``` Change-Id: I9bf2283e23ca7739a7e5b0993d9b6034ea28fb78 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-11-03soc/intel/common/block: Make integer literal unsigned longPaul Menzel
Fix the warning below by making the integer literal unsigned. ``` CC bootblock/soc/intel/common/block/*/lpc_lib.o src/soc/intel/common/block/lpc/lpc_lib.c:91:17: warning: The result of the \ '<<' expression is undefined alignment = 1 << (log2_ceil(window_size)); ~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ ``` Found-by: Clang static analyzer scan-build (clang version 4.0.1-6 (tags/RELEASE_401/final)) Fixes: e237f8b7 (soc/apollolake/lpc: Open I/O to LPC based on resource allocation) Change-Id: I094fb469f020f3c1fae936e304b4458858842a8e Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-11-03soc/intel/apollolake: Add APL CPU device IDMario Scheithauer
Add Apollo Lake CPU device ID for E0 stepping. Change-Id: I28fa222cd28b783d22c347cdbbd769e66bf10c30 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03soc/intel/apollolake: Set CPU to Max Non-Turbo RatioMario Scheithauer
If the Running Average Power Limits (RAPL) feature is disabled, the CPU should be set to the Max Non-Turbo Ratio. RAPL is switched off by CONFIG_APL_SKIP_SET_POWER_LIMITS. Furthermore, a frequency change should be prevented by disabling Enhanced Intel Speedstep Technology (EIST). So the CPU should run with constant frequency with this setting. Change-Id: I67020f7e75700255629294fd9bcf67ee01765a01 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-01soc/intel/cannonlake: Use SCS common codeBora Guvendik
This patch uses common SCS library to set up sd card. Change-Id: I7978bebaeba3a04fbfd01b3a5e5a37af61d2f4ce Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-31intel/common/smbus: increase spd read performanceKane Chen
This change increases the spd read performance by using smbus word access. BUG=b:67021853 TEST=boot to os and find 80~100 ms boot time improvement on one dimm Change-Id: I98fe67642d8ccd428bccbca7f6390331d6055d14 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-27soc/intel/apollolake: Switch to common p2sbLijian Zhao
Using common p2sb driver instead of private one. TEST=Boot up into OS, and read back registers through PCR by iotools, return is not 0xffffffff. Change-Id: I30f3ef7bc37a8cb268af6fe2e4da3ec835c17633 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-27soc/intel/cannonlake: Use common p2sb driverLijian Zhao
Add common p2sb driver support. TEST=Boot up into OS and read back pcr mmio address by iotools, return is not 0xffffffff. Change-Id: Ida66663e6daabfcb94d7e3224d75b118fc7cf829 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-27intel/common/p2sb: Add common p2sb driverLijian Zhao
Add common p2sb device driver that will use fixed resource instead dynamic assigned by PCI enumeration. TEST=None Change-Id: Ie3f7036a5956e3db1662678aaf43023ff79ae10e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22189 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-26soc/intel/cannonlake: Add support for C state and P stateShaunak Saha
This patch adds the C state and P state configurations for cannonlake soc. TEST = Boot and test the CPU states for all the cores are present in "powertop" tool output. Change-Id: I4ba156354f87646b25d0f9114ebf0583eedf72df Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/21891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-26soc/intel/cannonlake: remove duplicate power_state migrationPatrick Georgi
Common PMC code comes with its own. Change-Id: Ic055f046a2da1c56af4cc7936602d6191ffe7eef Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-26soc/intel/apollolake: avoid double accounting for power statePatrick Georgi
intel/common's pmclib already keeps track of the power state (since commit f073872e22728fe8ade85022740af95cc129e9a5 and doing it twice can mess up the data that ends up in cbmem (and from there, everything else), so don't. BUG=b:67976359 BRANCH=none TEST=builds Change-Id: I69c804a2a3bee43add940d8c827b7250f2fe9024 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-25soc/intel/apollolake: Fix broken GNVS offset for chromeosFurquan Shaikh
Change 03a235(soc/intel/apollolake: Add GNVS variables and include SGX ASL) added new GNVS variables but did not adjust the unused array size and thus broke chromeos offset. This change fixes the above issue by reducing the size of unused array. BUG=b:68254376 TEST=Verified that chromeos offset is correct. crossystem is able to read all variables. Change-Id: I279bfc4c702e46b88c1c7a067a24326ff8fed368 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22177 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-25soc/intel/skylake: Fix broken GNVS offset for chromeosFurquan Shaikh
Change 90ebf9 (soc/intel/skylake: Add GNVS variables and include SGX ASL) added new GNVS variables but did not adjust the unused array size and thus broke chromeos offset. This change fixes the above issue by reducing the size of unused array. BUG=b:68254376 TEST=Verified that chromeos offset is correct. crossystem is able to read all variables. Change-Id: I5f76f5bba4f0f50a23a863450743385ad2a82b2b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22176 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-23soc: Add Kconfig for each soc vendorChris Ching
Allows explicit ordering for vendors that share a common configuration that must be sourced last. The issue is that chips in soc/{amd,intel}/[ab].* will be able to override defaults set in this file, but Kconfig files that get sourced later (soc/amd/[d-z].*) will NOT be able to override these defaults. Note: intel and amd soc chips now need to be added manually to the new Kconfig file BUG=b:62235314 TEST=make lint-stable Change-Id: Ida82ef184712e092aec1381a47aa1b54b74ed6b6 Signed-off-by: Chris Ching <chingcodes@google.com> Reviewed-on: https://review.coreboot.org/22123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-23soc/intel/cannonlake: Increase stack size from 4KiB to 8KiBJohn Zhao
Backtracking stack used BEFORE each function call: 1. cbfs_boot_locate(&file_desc, "vbt.bin", NULL): 4104 (stack overrun) 2. locate_vbt: 4068 3. vbt_get: 4036 4. platforms_fsp_silicon_params_cb: 3924 5. do_silicon_init(&fsps_hdr): 3684 (3684-1092=2592 due to fsps) 6. fsp_silicon_init: 1092 Increase the stack size from 4kiB to 8kiB to prevent stack overrun. TEST=No stack overrun is observed and it boots to OS properly. Change-Id: I7e458b4489cea32449f197621ec81009ea7dd0bd Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21977 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-22soc/intel/cannonlake: Change max root port to 16Lijian Zhao
Cannonlake SOC support up to 16 PCI express root port. BUG=CID 1381813;1381814; Change-Id: I4df610e3fb01bd8e62be7e9c62144125f2a96c25 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-22security/vboot: Move vboot2 to security kconfig sectionPhilipp Deppenwiese
This commit just moves the vboot sources into the security directory and fixes kconfig/makefile paths. Fix vboot2 headers Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22soc/intel/skylake: pass SataSpeedLimit param to FSP2Matt DeVillier
The Librem13v2 needs to set this parameter to work around power-related issues with some SATA devices. Change-Id: I7fcef36ec8662e18834394b72427a0633c6b7e92 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22045 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-22skylake/me: Add debug output of HFST registersYouness Alaoui
The ME status is the interpretation of the status registers, but having the actual status registers printed is important and it doesn't hurt to show them. Change-Id: I6ef3401b36fedfa8aed14f4a62bdbec3d8c6d446 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/21960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-20soc/intel/cannonlake: Add platform.aslLijian Zhao
Include common platform.asl to have generic indication of power transition state of system. TEST=Enter and resume from S3, check the post code had been changed to 0096 and 0097. Change-Id: Ic38ac6d7e60441caeba5c088c9dbe4d901355782 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22111 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-20soc/intel/skylake: update GNVS with SGX dataPratik Prajapati
- Call sgx_fill_gnvs to update GNVS data, if CONFIG_SOC_INTEL_COMMON_BLOCK_SGX is set. - With this patch SGX ACPI device would get pached with enumaretd values of ECP device status, base address and length Change-Id: Ief0531fbab34838a3f8adb9cdc7d3fe19203c432 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20soc/intel/apollolake: update GNVS with SGX dataPratik Prajapati
Call sgx_fill_gnvs to update GNVS data, if CONFIG_SOC_INTEL_COMMON_BLOCK_SGX is set. Change-Id: I692f466d2c6f537d44aa042c4890ee8055c982c8 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20intel/common/block/sgx: Add API to enumerate SGX resources and update GNVSPratik Prajapati
Intel SDM: Table 36-6. CPUID Leaf 12H, Sub-Leaf Index 2 is called to enumerate SGX resources. Change-Id: I62f3fd8527e27040336c52bc78768035f4b7e5a9 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20soc/intel/skylake: Add GNVS variables and include SGX ASLPratik Prajapati
- Add GNVS variables for SGX - Include SGX ASL if CONFIG_SOC_INTEL_COMMON_BLOCK_SGX is set - With this patch SGX ACPI device would get created and kernel SGX driver would let loaded Change-Id: Ie95eb79a01e1c0005e0f137b015b7fe000c1ab2a Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20soc/intel/apollolake: Add GNVS variables and include SGX ASLPratik Prajapati
- Add GNVS variables for SGX - include SGX ASL if CONFIG_SOC_INTEL_COMMON_BLOCK_SGX is set - With this patch SGX ACPI device would get created and kernel SGX driver would let loaded Change-Id: I112cad3cd871082b1884787084c4cc0ebdc7d08f Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20intel/common/acpi: Add common SGX ASLPratik Prajapati
- Add EPC device for SGX. Kernel SGX driver expects EPC device. - Hid is INT0E0C - version of the object is 1.0, so _STR is "Enclave Page Cache 1.0" Change-Id: I9efba46469a125ea99241b04fe1ae550d6e03598 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/cannonlake: Fix HECI error on resetLijian Zhao
Move HECI init from bootblock to romstage, the HECI bar saved by CAR_GLOBAL, which will be lost on different stage. HECI BAR in ramstage will be read back from PCI. Also add fail safe option to reset in case of HECI command not successful. TEST= Force global reset from FSP and read back HECI bar in debug print. Change-Id: I46c4b8db0a80995fa05e92d61357128c2a77de4b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/cannonlake: Use EBDA structure to store soc reserve memory sizeSubrata Banik
Avoid calling calculate_dram_base() function to get chipset reserved memory size during pci resource allocation. Rather use EBDA to store chipset reserved memory size while calling cbmem_top_int(). This patch avoids one extra calculate_dram_base() call. BRANCH=none BUG=b:63974384 TEST=Ensures DRAM based resource allocation has taken care of Intel SoC reserved ranges. Change-Id: I2771ea55253ca7d16cd2e2951889ab092b47a9b1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22099 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-19soc/intel/skylake: Use EBDA structure to store soc reserve memory sizeSubrata Banik
Avoid calling calculate_dram_base() function to get chipset reserved memory size during pci resource allocation. Rather use EBDA to store chipset reserved memory size while calling cbmem_top_int(). This patch avoids one extra calculate_dram_base() call. BRANCH=none BUG=b:63974384 TEST=Ensures DRAM based resource allocation has taken care of Intel SoC reserved ranges. Change-Id: I52f359db5a712179d7f2accb4d323d759f3b052b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/cannonlake: Add IGD Support and pre-OS display codeAbhay Kumar
1. Add IGD opregion initialization. 2. Use frame buffer return by FSP for display. 3. Derived from "src/soc/intel/apollolake/graphics.c" with changes needed for CNL. TEST=Pre-OS screen comes up and VBT is getting passed to kernel. Change-Id: I19c0cf6cfc03fc9df9e98c75af4e486cb5a19e32 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/21999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-19soc/fsp_broadwell_de: Add support for GPIO handlingWerner Zeh
Add functionality to initialize, set and read back GPIOs on FSP based Broadwell-DE implementation. Change-Id: Ibbd86e2142bbf5772eb4a91ebb9166c31d52476e Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/22034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Probe XHCI for wake source for Internal PMEFurquan Shaikh
If GPE_STS indicates that the wake source is internal PME, but none of the controllers have the PME_STS bit set, then try probing individual XHCI ports to see if one of those was a wake source. In some cases e.g. gsmi logging with S0ix, pci_pm_resume_noirq runs before gsmi callback and clears PME_STS_BIT in controller register. In such cases, xhci port status might provide a better idea about the wake source. BUG=b:67874513 Change-Id: I841bb2abccfa9bd6553c1513e88a6306b40315e4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Prevent false logs in pch_xhci_port_wake_checkFurquan Shaikh
1. Ensure that port_status read is not all 1s to ensure that read from mmio address returned valid data. 2. If device connect/disconnect shows that it was a wake source, there is no need to check for usb activity. BUG=b:67874513 Change-Id: Id8b4a1fec7bfe530fe435a0f52944b273cdd89ad Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Define mask for SMI handlers that can be run in SCI modeFurquan Shaikh
This change adds a mask to allow SMI handlers to be run even in SCI mode. This prevents any SMI handlers from accidentally taking unnecessary action in SCI mode. Add APM_STS and SMI_ON_SLP_EN_STS to this mask to allow gsmi and sleep to work in SCI mode. BUG=b:67874513 Change-Id: I298f8f6ce28c9746cbc1fb6fc96035b98a17a9e3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Support logging wake source in SMMFurquan Shaikh
This change adds support for logging wake source information in gsmi callbacks. With this change, all the elog logging infrastructure can be used for S0ix as well as S3 on skylake. BUG=b:67874513 Change-Id: Ie1f81e956fe0bbe2e5e4c706f27997b7bd30d5e0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Move power_state functions to pmutil.cFurquan Shaikh
This change moves soc_fill_power_state and soc_prev_sleep_state to pmutil.c. It allows the functions to be used across romstage and smm. BUG=b:67874513 Change-Id: I375ac029520c2cdd52926f3ab3c2d5559936dd8c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22085 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-19soc/intel/skylake: Use PCH_DEV_* instead of PCH_DEVFN_*Furquan Shaikh
This change allows the same functions to be used across ramstage and smm without having to add checks for what stage is using it. BUG=b:67874513 Change-Id: I3b10c9e8975e8622d8cb0f66d90d39a914ba7e1c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Use newly added pmc_read_pm1_controlFurquan Shaikh
BUG=b:67874513 Change-Id: I298065f30647ae9bba8f6a8481bd34eec64f1d8e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/apollolake: Use newly added pmc_read_pm1_controlFurquan Shaikh
BUG=b:67874513 Change-Id: I6d5a76122b7d6e508e5ff3f4099e5d706fb48f9d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/common/block/pmc: Add helper routines to read/write PM1_CNTFurquan Shaikh
This change adds and uses helper routines for reading and writing PM1_CNT register. BUG=b:67874513 Change-Id: I69b9347ab54a392b67ba733eb00922583dc1ee5f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22081 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-19soc/intel/common/block/pmc: Add new function pmc_fill_pm_reg_infoFurquan Shaikh
This change creates a new function pmc_fill_pm_reg_info that fills chipset_power_state structure with all the PM register information. On the other hand, already existing pmc_fill_power_state calls into pmc_fill_pm_reg_info and then checks and returns previous sleep state information. This allows caller to get all the PM register information when previous sleep state is not relevant. BUG=b:67874513 Change-Id: Idc91e4aef5379549355aceb685f7afafa6a220c5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22080 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-18soc/intel/cannonlake: Set platform Debug Probe TypeLijian Zhao
Add option for user to select what kind of probe can be used for platform debug. TEST=Set to XDP and boot up system with XDP hooked, able to halt. Change-Id: Ib6add93e3f1c8a646aa625a4cea9be0acecc0487 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21942 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-18soc/intel/cannonlake: Update PCIE CLKREQ programingLijian Zhao
UPD of PCI express clock request was updated in FSP 7.0.14.11, change that in coreboot accordingly. TEST=NONE Change-Id: I2261deccfb489c0de577d580997744a484f07a04 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21878 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-18soc/intel/cannonlake: Add finalize functionLijian Zhao
Before OS boot up, the following actions need to be taken. 1. Lock down PMC/SPI/DMI/TCO register. 2. Disable Sideband Access. 3. Disable Heci interface. 4. Disable PMtimer base on config settings. TEST=Boot up into OS properly on both cannonlake y and cannonlake u rvp board. Change-Id: Icfa05b50fd76fbaeb856d398918990aedac4c5e6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21943 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-18soc/intel/cannonlake: Calculate soc reserved memory sizeSubrata Banik
This patch implements soc override function to calculate reserve memory size (PRMRR, ME stolen, PTT etc). System memory should reserve those memory ranges. BRANCH=none BUG=b:63974384 TEST=Ensures DRAM based resource allocation has taken care of intel soc reserved ranges. Change-Id: I3052a255c4496dc81c8dfc6882d3ad504abae9c6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Use EBDA area to store cbmem_top addressSubrata Banik
This patch uses BIOS EBDA area to store relevent details like cbmem top during romstage after MRC init is done. Also provide provision to use the same EBDA data across various stages without reexecuting memory map algorithm. BRANCH=none BUG=b:63974384 TEST=Ensures HW based memmap algorithm is executing once in romstage and store required data into EBDA for other stage to avoid redundant calculation and get cbmem_top start from EBDA area. Change-Id: I763ad8181396ea8d8c0d5cf088264791ba62dceb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Refactor memory layout calculationSubrata Banik
This patch split entire memory layout calculation into two parts. 1. Generic memory layout 2. SoC specific reserve memory layout. usable memory start = TOLUD - Generic memory size - - soc specific reserve memory size. Change-Id: I56e253504a331c0663efb2b90eaa0567613aa508 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Create acpi_get_sleep_type() to get previous sleep stateSubrata Banik
This patch uses PMC common function to get previous sleep state using cbmem or chipset_power_state global structure. acpi_get_sleep_type is needed in PRE_RAM stage when soc selects CONFIG_EARLY_EBDA_INIT kconfig option. Change-Id: Ib9f8bdc1c682807450b6c01941b9a0927789b2d8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-17soc/intel/common/block/pmc: Move pmc_disable_all_gpe to romstageFurquan Shaikh
Instead of disabling all GPEs during PMC init in bootblock, this change moves it to pmc_fill_power_state which allows romstage to correctly fill up GPE_EN registers in chipset_power_state. This is essential for correctly identifying the wake source. Disabling all GPEs was added recently in change 74145f76 (intel/common/pmc: Disable all GPEs during pmc_init) because keeping GPEs enabled in coreboot while enabling SMI could lead to side-effects as explained in the change. Moving pmc_disable_all_gpe to pmc_fill_power_state should be safe as that happens before SMI is enabled in coreboot. TEST=Verified that GPE-based wake source is correctly identified. Also, no issues observed while resuming from S3. Change-Id: I8e992ad09ffdefba62de11fa572e783715776bf1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22033 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-16soc/intel/common: sanity check ebda signatureAaron Durbin
It's possible for chipsets utilizing ebda to cache the cbmem_top() value to be called prior to the object being entirely setup. As such it's important to check the signature to ensure the object has been initialized. Do that in a newly introduced function, retrieve_ebda_object(), which will zero out the object if the signature doesn't match. Change-Id: I66b07c36f46ed9112bc39b44914c860ba68677ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-10-16console/flashconsole: Enable support for postcarYouness Alaoui
If FSP 2.0 is used, then postcar stage is used and the flashconsole as well as spi drivers needed to be added. Change-Id: I46d720a9d1fe18a95c9407d08dae1eb70ae6720e Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/21959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16src/soc/skylake: Fix Null pointer dereferencesShaunak Saha
Fix bug detected by coverity to handle the NULL pointer dereference Coverity Issues: * 1379849 * 1379848 TEST=Build and run on skylake platform Change-Id: Iec7a88a03531bbfeb72cedab5ad93d3a4c23eef5 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/21909 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-16intel/common: CAR setup CQOSNaresh G Solanki
Enable CQOS on Geminilake. In Apololake, CBM_LEN is 0x7. Whereas the same in Geminilake is 0xF. Thus get CBM_LEN using cpuid instruction & generate CBM_LEN_MASK. Later use the CBM_LEN_MASK when writing to IA32_L2_MASK_* to set right bits. BUG=None TEST= Build for Geminilake platform i.e., glkrvp & check for successful CAR setup. Even verified the same on APL platform i.e., on Reef Change-Id: Ic736dba1a46629ff5bf3183082799c0c1468e6d9 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com Reviewed-on: https://review.coreboot.org/21701 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-14intel/skylake: Use Sata related registers from devicetreeYouness Alaoui
Enable the use of the SataPortsEnable and SataPortsDevSlp registers which were being ignored from the devicetree and were not affecting the resulting UPD parameters. SataPortsEnable was only being copied for the first SATA port, while the other ports were left ignored. Change-Id: Iae70a4d6375fa5d1b05ee89f6b97c65dbbf28dda Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/21958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-12intel/common/pmc: Disable all GPEs during pmc_initFurquan Shaikh
If GPEs are not cleared during pmc_init, it could result in issues if standard wake events are generated while coreboot is initializing. e.g. (Observed on soraka): 1. Suspend to S3 2. Lidclose 3. Lidopen 4. EC wakes up the host using WAKE# pin 5. On wakeup, pmc_init occurs which does not clear GPEs 6. MP init enables SMI 7. In order to add wake event to elog, coreboot sets wake mask on the EC, which causes the EC to assert WAKE#. 8. Since WAKE# is asserted, it results in an SMI#. However, EC does not de-assert WAKE# until host queries and clears the host event bit (which does not happen since coreboot is stuck in handling the SMIs). This is one of the issues that can occur when GPEs are unnecessarily enabled in coreboot. Before the move to PMC common library, SKL PMC driver set all GPEs to 0 and hence this issue did not occur. This change explicitly disables all GPEs during pmc init in order to avoid any side-effects. BUG=b:67712608 TEST=Verified that device resumes fine using lidclose/lidopen to suspend and resume. Change-Id: Ic5be02a23a8dbf43c4d7adf00251639ded4a94c9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21969 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-12soc/intel/common: Clean up PMC library GPE handling APIFurquan Shaikh
1. Update gpe handling function names to explicitly mention if they are operating on: a. STD GPE events b. GPIO GPE events c. Both 2. Update comment block in pmclib.h to use generic names for STD and GPIO GPE registers instead of using any one platform specific names. BUG=b:67712608 Change-Id: I03349fe85ac31d4215418b884afd8c4b531e68d3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21968 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-12soc/intel/cannonlake: add length information for communitiesBora Guvendik
TEST = Boot to OS, check if pinctrl probed successfully Change-Id: Ib20c955d535cd9c48175b4d3934b4699b6186874 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-12soc/intel/cannonlake: Add ACPI platform sleep capabilityVaibhav Shankar
Add the required ACPI sleep states Change-Id: I7750062554f087e4f88da56790e4122d5fa20529 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/21975 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 23:11:17 +0000