| Age | Commit message (Collapse) | Author |
|---|
|
Check prerequisites before sending GLOBAL RESET command to CSE.
TEST=Verified on hatch.
Change-Id: Ia583e4033f15ec20e942202fa78e7884cf370ce4
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Below changes are done:
1. Allow execution of HMRFPO_ENABLE command if CSE meets below
prerequisites:
- Current operation mode(COM) is Normal and Curret working state(CWS)
is Normal.
-(or) COM is Soft Temp Disable and CWS is Normal if ME's
Firmware SKU is Custom.
2. Check response status.
3. Add documentation for send_hmrfpo_enable_msg().
4. Rename padding field of hmrfpo_enable_resp to reserved.
The HMRFPO (Host ME Region Flash Protection Override) mode prevents CSE to
execute SPI I/O cycles to CSE region, and unlocks the CSE region to perform
updates to it. This command is only valid before EOP(End of Post).
For Custom SKU, follow below procedure to place CSE in HMRFPO mode:
1. Ensure CSE boots from BP1. When CSE boots from BP1, it will have
opmode Temp Disable Mode.
2. Send HMRFPO_ENABLE command to CSE. Then, CSE enters HMRFPO mode.
CSE Firmware Custom SKU Image Layout:
= [RO] + [RW + DATA PART] = [BP1] + [BP2 + DATA PART]
Here, BP1 will have reduced functionality of BP2, and the BP1 will be
CSE's RO partition and [BP2 + DATA PART] together will represent
CSE's RW partition. CSE can boot from either BP1(RO) or BP2(RW).
CSE Image Layout in Consumer SKU: BP2 + BP3 + DATA PART
TEST=Verfied on hatch board.
Change-Id: I7c87998fa105947e5ba4638a8e68625e46703448
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I7a5d7bb476c33ab995136eb47ef0258b483a42ef
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I117c8d2f71824292c4ca87b6f9434d2106bb512d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update RP number to 12 according to PCH EDS#576591 vol1 rev1.2.
BUG=b:151208838
TEST=build RVP successfully
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Iabdbfd99f7154741c16da53bcd9d1c7ca4f81129
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
|
|
Check for dev enabled status for CNVi and update the
UPD accordingly.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I15a03cc70f12e094badf942dd81f22bd09531051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add config to override CpuRatio or setting CpuRatio to
allowed maximum processor non-turbo ratio.
BUG=151175469
BRANCH=none
TEST=Build and boot tglrvp and observe there is no extra reset
in meminit.
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I2fa883b443d0a4c77d62275faeacd1ed2c67a97c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39493
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change VmxEnable UPD value based on Kconfig ENABLE_VMX
BUG=None
TEST=Built image and booted to kernel.
Change-Id: I725474643193223865a135813cf882fd7636d24a
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Tigerlake platform supports Virtualization Technology for Directed I/O.
Enable VT-d feature and generate DMAR ACPI table.
BUG=None
TEST=Booted to kernel and "dmesg | grep DMAR" to verify the DMAR ACPI
remapping table existence. Retrieve /sys/firmware/acpi/tables/DMAR and
"iasl -d DMAR" to check all entries.
Change-Id: Ib89d0835385487735c63062a084794d9da19605e
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
commit 7f9ceef disables TCO SMIs unless specifically enabled, so help
the linker throw out the function that handles them in that case.
Change-Id: Ia3c93b46e979fb8b99282875b188415f249d38dd
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michael Niewöhner
|
|
Set value for PcieRpL1Substates according to devicetree.
Chip config parameter PcieRpL1Substates uses (UPD value + 1)
because UPD value of 0 for PcieRpL1Substates means disabled for FSP.
In order to ensure that mainboard setting does not disable L1 substates
incorrectly, chip config parameter values are offset by 1 with 0 meaning
use FSP UPD default.
get_l1_substate_control() ensures that the right UPD value is set in
fsp_params.
Chip config parameter values
0: Use FSP UPD default
1: Disable L1 substates
2: Use L1.1
3: Use L1.2 (FSP UPD default)
BUG=none
BRANCH=none
TEST=Boot up and check FSP log for PCIe config for this values
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I66743a29ad182bd49b501ae73b79270a9eb88450
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39412
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Check for dev enabled status for HDA controller and
update the UPD accordingly.
BUG=151174264
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Id5dfff275ed9906852ef7eb7461fbe89a3a115c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39441
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds case intrusion detection to the SMI handler. At this point one
can add the code to be executed when the INTRUDER signal gets asserted
(iow: when the case is opened).
Examples:
- issue a warning
- trigger an NMI
- call poweroff()
- ...
Tested on X11SSM-F.
Change-Id: Ifad675bb09215ada760efebdcd915958febf5778
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
TEST=Verified that dmidecode produces output identical to private repo
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I951ea94c280b7dd5b67f320a264d13fca82a4596
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39359
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
select correct UART settings according to Kconfig
DEBUG_INTERFACE_UART: Legacy UART
DEBUG_INTERFACE_SERIAL_IO: PCH UART
Add check for DEBUG_INTERFACE_TRACEHUB selection and set
"PcdDebugInterfaceFlags" UPD accordingly.
BUG=None
TEST=boot jslrvp board with Debug FSP and check FSP UART log
Change-Id: I7be7f93082f9c64c1c45963d70ee2e3b3d29986a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I43cccd32589d75a9b0c7e60f8c82b19bbe6b69a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Set TCO to issue an SMI when the case instrusion switch gets pressed.
The SMI is controlled along with the general TCO SMI Kconfig.
Tested on X11SSM-F.
Change-Id: I3bc62c79ca3dc9e8896d9e2b9abdc14cfa46a9e7
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Make i/o-standby state and termination configurable for GPIs.
Change-Id: Id1a3c00aa8a857afa08e745b0b6a578b01fa6d47
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This code also sets unused interrupt lines to the recommended safe
value of 0xff instead of ignoring such devices.
Change-Id: I7582b41eb3288c400a949e20402e9820f6b72434
Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This eliminates Linux kernel warnings that look like:
pcieport 0000:00:17.0: can't derive routing for PCI INT B
ixgbe 0000:07:00.1: PCI INT B: no GSI - using ISA IRQ 10
Change-Id: I2029e7a8252b9e48c1df457d8da5adce7d1ac21d
Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
pcie_port.asl defines an IRQM method that looks up legacy interrupt
swizzling based on incoming interrupt "pin" A-D and root port number.
Unfortunately the 8-bit root port number stored at offset 0x4F in the
config space matches the device number, not the 1-8 scheme used in
the LUT reported to the OS.
Fix the case values to match the hardware.
Change-Id: I103d632a4bc99461f02e05aa0f9a9eb7376770d9
Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
SATA Mode Select is bit 16 of the SATA General Configuration
register. This code currently incorrectly pokes at the Port Clock
Disable bits in the Port Mapping Register, and without clock the
affected ports can't link.
Change-Id: I37104f520a869bd45a32cfd271d0b893aec3c8ed
Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vanessa Eusebio <vanessa.f.eusebio@intel.com>
Reviewed-by: David Guckian
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There was a bug like this for skylake that seems to have been copied to
other SoCs.
Signed-off-by: Matt Delco <delco@chromium.org>
Change-Id: Ib4651eda46a064dfb59797ac8e1cb8c38bb8e38c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If we don't pretend to have binaries, there is no need to add fake ones.
This also fixes building the default config.
Change-Id: I8f933f24a734a9ce3d82ef57f7f234ee4dfa86e9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39383
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To use Optane memory, we need to set 2x2 PCIe lane mode while we need
to set 1x4 PCIe lane mode for NVMe. The mode can be selected using
the FIT tool at build time.
By enabling hybrid storage mode in FSP, FSP will set 2x2 PCIe lane mode
if Optane memory is detected and the mode is not 2x2 and set 1x4 PCIe
lane mode if Optane memory is not detected and the mode is not 1x4
during boot up. The mode is saved in SPI NOR for next boot.
BUG=b:148604250
BRANCH=none
TEST=Build and test booting TGLRVP from NVMe and Optane
Check PCIe lane configuration.
Show all the NVMe devices
lspci -d ::0108
Show all the NVMe devices and be really verbose
lspci -vvvd ::0108
Print PCIe lane capabilities and configurations for all the NVMe devices.
lspci -vvvd ::0108 | grep -e x[124]
Print all the PCIe information of the device ae:00.0
lspci -vvvs ae:
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I25bc380697b0774cc30ad1b31ad785ee18822619
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39232
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to add the smbios_slot_desc for the SMBIOS Type9 entries into
the devicetree, and not use numbers but strings like
"SlotTypePciExpressGen3X4", smbios.h needs to be included in the
static.c.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Id15fe4101d14479b02e536fdf63748a241c02bd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Coverity detects pointer dev as FORWARD_NULL. Add sanity check
for dev to prevent NULL pointer dereference if dev did not point
to the audio device.
BUG=CID 1420208
TEST=Built image successfully.
Change-Id: I2a62da44c7044f9dc281eae0949f7f7b612ab238
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add registers that are relevant for the case intrusion detection
functionality.
Intel documents: 332691-003EN, 335193-006, 341081-001, ...
Change-Id: If12d21e8e6721abb877cbbfbbba8f0127a86d96b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Enable TCO SMIs in common code, if selected by Kconfig. This is needed
for the follow-up commits regarding INTRUDER interrupt.
Tested on X11SSM-F.
Change-Id: If63effe74ac59b5d051a6454bc6375bb89605215
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Allow the user to select if TCO shall issue SMIs or not.
Change-Id: Id22777e9573376e5a079a375400caa687bc41afb
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39326
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Automatically add microcode binaries from intel-microcode 3rdparty
respository for Braswell processors using Makefile.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iec57e4d5cd63b9bccc869bf178053f1c99b81b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add configs to enable CNVi mode and CNViBtCore.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ic372348a1409b2594a85b71b2fc742be96b84b87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39317
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support for Intel Xeon-SP.
This patch is developed and verified with Skylake Scalable
Processor, which is a processor in Xeon-SP family. The code
is expected to be reusable for future geneations of Xeon-SP
processors, and will be updated with smaller targeted
patches accordingly, to add support for additional Xeon-SP
processors, to add features, and to improve the code base.
The Skylake-SP FSP is based on FSP 2.0. The FSP is a
proof-of-concept build. The binary is not shared in public,
when this patch is upstreamed.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Tested-by: johnny_lin@wiwynn.com
Change-Id: Idc9c3bee17caf8b4841f0bc190cb1aa9d38fc23e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The register TCO1_STS is never cleared, which will cause SMIs to either
retrigger over and over again (e.g. TIMEOUT) or prevent concurrent
interrupt events, depending on which event triggered.
Clear both TCO2_STS and TCO1_STS.
This also fixes the issue where SECOND_TO_STS will always end up set in
the SMI handler by unconditionally (re)setting it.
Tested on X11SSM-F, where enabling TCO caused the terminal to get
flooded with SMI debug messages. With this patch, a message gets written
every ~1 second.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Ia57c203a672fdd0095355a7e2a0e01aaa6657968
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39259
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allows to override the PortUsb20Enable and PortUsb30Enable FSP options
(which are set to 1 by default) to enable/disable USB ports if the
usb_config_override flag is set to "1". Therefore, these changes will
not affect other boards with an Apollo Lake processor.
Change-Id: Ia94a2be1647f7743ef0c918ae3b34437a179261c
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Coverity detects pointer dev as FORWARD_NULL. Add sanity check
for dev to prevent NULL pointer dereference.
BUG=CID 1353148
TEST=Built and boot up to kernel.
Change-Id: Ic0ad1ec79c950a3c17feccdde4f87f4a107fe8c0
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Change-Id: Iaa295c74e9c470d5830e22d0b0c73013c7333293
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39266
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The cache as ram code will use one form of a non-eviction mode.
Change-Id: I418eb48434aa3da3bf5ca65315bb8c9077523966
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I55bbb535372dc9af556b95ba162f02ffead2b9e2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current elog implemetation searches for an active PME status bit by
iterating the PCI devices. On disabled or hidden devices a BUG gets
triggered: BUG: pch_log_rp_wake_source requests hidden ...
This is caused by the use of the PCH_DEV_* macros which resolve to
_PCH_DEV and finally call pcidev_path_on_root_debug.
Disabled devices are skipped already so we can safely use the DEVFNs
instead, circumventing the BUG.
Change-Id: Id126e2c51aec84a4af9354b39754ee74687cefc8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
|
|
update SerialIoUartAutoFlow settings for Tiger Lake platform.
BUG=none
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I5ff2c63857a868ca4ed72c6d93bf518e085b8879
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39169
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: caveh jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit is adding a dependency check for the FSP_USE_REPO
config option which so far was not able to deal with Denverton
systems.
Change-Id: I615305da5865bef305f560f5c90482cf0937b25a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
|
|
Allows to enable/disable NPK device from the device tree:
device pci 00.2 off end # NPK
Tested on Kontron come-mal10.
Change-Id: I910245d4ff35a6a0a9059fb6911d4426cdb999b6
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38814
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adds PAD_CFG_NF_BUF_IOSSTATE_IOSTERM macro to configure native function,
iosstate, iosterm and disable input/output buffer. This is used in the
pad configurations for the Kontron COMe-mAL10 module board [1].
[1] https://review.coreboot.org/c/coreboot/+/39133
Change-Id: I7aa4d4dee34bd46a064079c576ed64525fd489e6
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure ethernet based on board config
BUG=none
BRANCH=none
TEST= build TGLRVP and check ethernet is disabled based on devicetree
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I3286f5fefc962a5e55b5554982271ed6b885f7d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39153
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adapted from implementation in sb/intel/common.
Test: build/boot variants of google/{jecht, auron}
with Tianocore and SMMSTORE enabled
Change-Id: I4d2aaa80dad229a6c7b947d0edf8fb1174050ad0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Adapted from implementation in sb/intel/common.
Test: build/boot variants of google/cyan with Tianocore
and SMMSTORE enabled
Change-Id: Ife4681983d0eecbc01c539b477664f3dd8bb9368
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Adapted from implementation in sb/intel/common.
Test: build/boot variants of google/rambi with Tianocore
and SMMSTORE enabled
Change-Id: Id8adeda982feba1cbcf5e04cf0bef0a6710ad4f0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add gpio definition for Jasper Lake gpio controller.
Also created a separate file for JSL and TGL gpio keeping common asl file.
gpio_soc_defs.h must pass correct information/macro values to asl file
for code to work.
GPIO controller includes 4 gpio community and 10 groups. Patch adds
definition for all gpio within community and groups
Updated IRQ mapping for all gpios
TEST=Check if jslrvp and tglrvp code is compiling
Change-Id: Iae4e694ecb30658e43c5ed99e5436579fd7d2ed2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
BUG=none
BRANCH=none
TEST=Build and verify boot of WaddleDoo.
Change-Id: I8de502d3f05d52b9dae34e3b013c6d5b1896fa85
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Set DEBUG_INTERFACE_TRACEHUB as default and select correct UART.
DEBUG_INTERFACE_UART: Legacy UART
DEBUG_INTERFACE_SERIAL_IO: PCH UART
BUG=None
BRANCH=None
TEST=Build with debug FSP and boot tglrvp boards and check FSP uart log
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I5374a5562ac56b305f57db10b1a61b297a4a1c67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39167
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since there is only one device ID used for UART,
an array is not needed. Therefore, just save the
device ID to the device variable.
Change-Id: Icd325e1102a85cc175f6025519a47a1b64ee5b46
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch moves the PCI ID definitions to pci_ids.h file
and replaces every occurrence with the new names.
The resulting binary doesn't differ from the one
without this patch.
Used documents:
- Intel 337018
Change-Id: Ib7d2aae78c8877f3c9287d03b20a5620db293445
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This time, it failed to build if measured boot was not enabled. Fix this
problem, and make sure flashconsole will not break like that again.
Change-Id: I5f5ffd14a3225804524cb0c1518e3d99737e0a93
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Move print_me_fw_version(), remove print_me_version/dump_me_version from
cnl/skl/apl and make changes to call print_me_version() which is defined
in the CSE lib.
TEST=Verified on hatch, soraka and bobba.
Change-Id: I7567fac100b14dc207b7fc6060e7a064fb05caf6
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Remove HOST_RESET_ONLY reset type of GLOBAL_RESET HECI command as it
is not supported.
Change-Id: I17171e1e5fe79710142369499d3d904a5ba98636
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch includes the change required to display Apollo Lake platform
information which reports CPU, MCH, PCH and IGD information in romstage.
BUG=None
TEST=
1. Boot to OS on Bobba board.
2. Verified below info from CPU Console log in romstage
CPU: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz
CPU: ID 706a1, Geminilake B0, ucode: 00000031
CPU: AES supported, TXT NOT supported, VT supported
MCH: device id 31f0 (rev 03) is Geminilake
PCH: device id 3197 (rev 03) is Geminilake
IGD: device id 3185 (rev 03) is Geminilake EU12
Change-Id: Id4edfeae7faee9f5f80698cf34b31fdcb066a813
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38824
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change is mainly to control PlatformDebugConsent FSP UPD.
PlatformDebugConsent is enabled if SOC_INTEL_<SOC>LAKE_DEBUG_CONSENT != 0.
PlatformDebugConsent in FspmUpd.h has the details.
TEST=Able to connect ITP/DCI with target system.
Change-Id: I39fe84025cb2bff186d61b2fcad531db52e2b440
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
The following plumbs through the enabling of Intel's TetonGlacierMode
allows for reconfiguring the PCIe lanes at runtime for hybrid drives
to be accessable via devicetree.
BUG=b:149171631
BRANCH=none
TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and
run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration
on Puff.
Change-Id: Id9a72161494db6a4da4abd3302b06df7c70634ab
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
TEST=Build dedede board
Change-Id: I942a7036bf627b3d8262756e5e2026dcb0949dd5
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39131
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FSP parameters for various configurations like:
- graphics
- USB
- PCIe root ports
- SD card
- eMMC
- Audio
- Basic UART configuration
These are the initial settings for JSL.
This patch also corrects the debug_interface_flag definitions.
TEST=Build dedede board
Change-Id: Ia8e88f92989fe40d7bd1c28947e005cc0d862fcb
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This patch overrides required FSP-S UPDs to enable 8254 timer
support for TGL if CONFIG_USE_LEGACY_8254_TIMER is selected.
TEST=Required to boot TianoCore payload.
Change-Id: Iaeff5c4b92691ed6ba7b71541ed4f947d5d299a8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes all legacy 8254 FSP UPDs (Enable8254ClockGating and
Enable8254ClockGatingOnS3) depend on CONFIG_USE_LEGACY_8254_TIMER to
avoid discrepancy between S0 and S3 resume flow.
TEST=Able to boot to TianoCore without any hangs and errors, also
verified S3 resume path doesn't clock gate 8254 timer using FSP-S UPD.
Change-Id: Id6fe74a51537abbb9ff48db925e37a64e5b21f78
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39110
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update Jasper Lake CPU, SA and PCH IDs.
BUG=b:149185282
BRANCH=None
TEST=Compilation for Jasper Lake board is working
Change-Id: I2c9ec1eb4236184b981d99250f263172c82f7117
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This patch cleans soc/intel/{cnl, icl, tgl} by moving common
soc code into common/block/cse.
Supported SoC can select existing HECI_DISABLE_USING_SMM option to
select common cse code block to make heci function disable using
sideband interface during SMM mode at preboot envionment.
BUG=b:78109109
TEST=Able to make HECI disable in SMM mode successfully without any hang
or errors in CNL, ICL and TGL platform.
Change-Id: I22a4cc05d3967c7653d2abe2c829b4876516d179
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26133
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch cleans soc/intel/{apl/cnl/skl/icl/tgl} by moving common soc
code into common/block/smihandler.c
BUG=b:78109109
TEST=Build and boot KBL/CNL/APL/ICL/TGL platform.
Change-Id: Ic082bc5d556dd19617d83ab86f93a53574b5bc03
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add Thermal Design Current (TDC) defaults for CML:
1. TdcEnable
2. TdcPowerLimit
BUG=b:148912093
BRANCH=None
TEST=build coreboot and Intel FSP with fw_debug enabled, flash image to
the device, capture the log from the serial port during boot-up and
check TdcEnable and TdcPowerLimit for each domain in captured log
Signed-off-by: Marx Wang <marx.wang@intel.com>
Change-Id: Ie4b17e5b4ce41c1adb436ae5646f0d8578a440e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I1d36e554618498d70f33f6c425b0abc91d4fb952
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38928
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Default FSP values for "GtFreqMax" and "CdClock" UPDs are "Auto", hence
related FSP-S UPD override can be avoided from coreboot.
As per FSP-S UPD Header (FspsUpd.h)
/** Offset 0x020E - GT Frequency Limit
0xFF: Auto(Default)
**/
UINT8 GtFreqMax;
/** Offset 0x0209 - CdClock Frequency selection
0: (Default) Auto
**/
UINT8 CdClock;
TEST=Able to get Pre-OS display on ICLRVP and Dragonegg platform.
Change-Id: Ie500dd5fad5cd358ea3fad4d5c0be1b0c148584b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Change-Id: Ia05cb2de1b9f2a36fc9ecc22fb82f0c14da00a76
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove me_hfs3 union from cnl/me.c since it's already defined in soc/me.h.
Rename below union tags for consistency:
hfsts2 -> me_hfsts2
hfsts3 -> me_hfsts3
hfsts4 -> me_hfsts4
hfsts5 -> me_hfsts5
hfsts6 -> me_hfsts6
TEST=Verified on hatch
Change-Id: If81edbad0322425ee3e96c55a9c84a5087604308
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This patch makes all bit field macro definition for SMI_STS register
(offset 0x44) be consistent i.e. ending with "_STS_BIT".
Also modified relevant files where those macros are getting used.
Change-Id: Ibe3fbb459c106a3a58cd9a8b6eb3d7ee92e6ed82
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The STM is a part of the core VTx and using ENABLE_VMX will make the
STM option available for any configuration that has an Intel
processor that supports VTx.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: I57ff82754e6c692c8722d41f812e35940346888a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38852
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes unnecessary helper function pch_lpc_interrupt_init()
and directly uses soc_pch_pirq_init() function to avoid redundant
device NULL check.
TEST=Able to build and boot CML platform.
Change-Id: I3d11afb7e98f9b7f84beb2fdf308bbffeb3bbff7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38952
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tigerlake irq.h and pci_irqs.asl have differences compared to
Jasperlake. Hence renaming irq.h as irq_tgl.h and pci_irqs.asl as
pci_irqs_tgl.asl
Also adding a new file irq_jsl.h and pci_irqs_jsl.asl for Jasperlake
SoC and allowing irq.h and pci_irqs.asl to choose the correct file based
on SoC selected.
BUG=None
BRANCH=None
TEST=Compilation for Jasperlake board is working
Change-Id: Ia8e88f92929fe40d7be1c28947e005cb0d862fcb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
PCH_DEV_P2SB already covers both __SIMPLE_DEVICE__ cases. The values are
only used for PCI-config access functions, which also check for NULL
when necessary.
The PCI_DEV_INVALID case can't occur by definition, and if we wanted to
check, we could do so at compile time using _Static_assert().
Change-Id: I400fc20133809aaa0fd0519531a62ec9b8812ef1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Below helper function is added:
cse_wait_com_soft_temp_disable() - It polls for CSE's operation mode
'Soft Temporary Disable'. CSE enters this mode when it boots from
RO(BP1) partition. The function must be called after resetting CSE to
wait for CSE to enter 'Soft Temporary Disable' Mode.
BUG=b:145809764
Change-Id: Ibdcf01f31b0310932b8e834ae83144f8a67f1fef
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Send HMRFPO_GET_STATUS command when CSE's current working state is Normal.
TEST=Verified on hatch.
Change-Id: I4380e5096c6346d88aae6826d19a2f4ed1e97036
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Also replace 'BIOS' by coreboot when the image is 'coreboot.rom'.
Change-Id: I8303b7baa9671f19a036a59775026ffd63c85273
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Configure UPDs to support Audio enablement.
Correct the upd name in jslrvp devicetree to avoid compilation issue.
BUG=b:147436144
BRANCH=none
TEST=Build and boot tigerlake rvp board
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Idd3927a33d303ed5a663b5b838f43ed4ebc7a0db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Changes:
1. Define HFSTS3 register across SoCs(apl/cnl/icl/tgl).
2. Define cse_is_hfs3_fw_sku_custom() which checks ME's Firmware SKU
is Custom or not.
TEST=Verified on hatch, soraka, bobba and iclrvp.
Change-Id: I4188e58a4a08d87be2d84674e00ed1407fb8bf82
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Rename below union tags for consistency:
me_hfs2 -> me_hfsts2
me_hfs3 -> me_hfsts3
me_hfs6 -> me_hfsts6
TEST=Verified on Soraka
Change-Id: Ibb53e6a5f2b95021f86b3e42e100b711b7d6e64e
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Updating MCH, GSPI And I2C base addresses for JSP in iomap header.
BUG=None
BRANCH=None
TEST=Compilation for Jasper lake board is working
Change-Id: Ia8e88e02989fe80d7bd1f28942e005cb0d862fcb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38754
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add device id for Tiger Lake Dual core part.
BUG=b:148965583
BRANCH=none
TEST="emerge-tglrvp coreboot chromeos-bootimage", flash and boot
Change-Id: Ied0cef2fcc8ae6f25949f98f886c4d79f64b54cd
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Make sure the Skylake comment refers to the correct BWG paragraph and
update the text for all.
BUG=N/A
TEST=build
Change-Id: Id383f200e079bdb91cea2240bd7a957d723a7b89
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
DMI PCR 2770 (LPC IO DECODE RANGES) should be identical to LPC PCI
offset 0x80. This is specified in PCH BWG par 2.5.1.5.
Add the support to make sure this PCR is always set correctly.
BUG=N/A
TEST=tested on facebook monolith.
Change-Id: I33ff2b96dea78b5ff1c7c9416cf74f67d79f265d
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38746
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With CL:1940398, this option is no longer needed. Recovery
requests are not cleared until kernel verification stage is
reached. If the FSP triggers any reboots, recovery requests
will be preserved. In particular:
- Manual requests will be preserved via recovery switch state,
whose behaviour is modified in CB:38779.
- Other recovery requests will remain in nvdata across reboot.
These functions now only work after verstage has run:
int vboot_check_recovery_request(void)
int vboot_recovery_mode_enabled(void)
int vboot_developer_mode_enabled(void)
BUG=b:124141368, b:35576380
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I52d17a3c6730be5c04c3c0ae020368d11db6ca3c
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38780
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI files for xhci in JSL is different from TGL. Hence, renaming
xhci.asl to xhci_tgl.asl and adding a new file xhci_jsl.asl for JSL.
Also, allowing xhci.asl to choose the correct file based on the SoC
selected.
BUG=None
BRANCH=None
TEST=Compilation for JasperLake board is working
Change-Id: Ia8e88e02989ff80d7cd1f28941e005cb0d842fcb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Change:
1. PCR_PSF3_TO_SHDW_PMC_REG_BASE_JSP to 0X0A00 for JSP
2. Platform check in espi.c
BUG=None
TEST=
1. Test for JSL RVP Boot
2. Verify PMC register values are valid for GEN_PMCON
and GBLRST_CAUSE from the coreboot console logs.
Change-Id: I6017a9703764b5454e7be479c1e08afe614908f1
Signed-off-by: Usha P <usha.p@intel.com>
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38704
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update Kconfig:
1. select INTEL_CAR_NEM for SOC_INTEL_JASPERLAKE
2. Update the right value of MAX_ROOT_PORTS and MAX_PCIE_CLOCKS
for SOC_INTEL_JASPERLAKE
Change-Id: I4aa52c80bfd6134164a0925ea548579b3cc54a55
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
1. Move ME firmware SKU types into common code.
2. Define ME_HFS3_FW_SKU_CUSTOM SKU.
TEST=Verified on hatch & soraka.
Change-Id: Iaa4cf8d5b41c1008da1e7aa63b5a6960bb9a727b
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
By updating the FSP submodule we now got all FSP headers from within
that repo. This commit changes the default paths to use these and
fixes some include paths to allow the usage of
vendorcode/intel/edk2/UDK2017 together with the official Intel
distribution.
We are also adding back the CHANNEL_PRESENT enum, that is
missing in the official headers.
This was tested on the Razer Blade Stealth (late 2019).
Change-Id: I7d5520dcd30f4a68af325125052e16e867e91ec9
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37579
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christoph Pomaska <github@slrie.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add function to return the fixed io decode ranges contained in register
0x80 of the LPC interface.
BUG=N/A
TEST=build
Change-Id: Ie46d7c9d7a399a8489c030d906f75ba61db19cc4
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38745
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selecting STM on an arbitrary platform would likely result in a brick,
so let's hide the prompt by default.
Change-Id: I50f2106ac05c3efb7f92fccb1e6edfbf961b68b8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: <cedarhouse1@comcast.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move some of the common memory code that was being performed in
mainboard into the soc to reduce redundant code going forward.
BUG=b:145642089
BRANCH=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer, log into kernel and verify memory size shows 8GB.
Change-Id: I8de502d4f05d52b9dae34e3b013c6d5b1886fa55
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
send_heci_reset_req_message()
Below changes have been implemented in send_heci_reset_req_message():
1. Modify return values to align with other functions in the same file.
2. Add additional logging.
3. Replace macro definitions of reset types with ENUM.
4. Make changes to caller functions to sync with new return values.
5. Rename send_heci_reset_req_message() to cse_request_global_reset().
Test=Verified on hatch board.
Change-Id: I979b169a5bb3a5d4028ef030bcef2b8eeffe86e3
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37584
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Below changes are implemented:
1. Fix typos.
2. Rename 'padding' field of hmrfpo_get_status_resp struct to
'reserved' to match with ME BWG Guide.
3. Add documentation for HMRFPO Status.
TEST=Build and boot hatch
Change-Id: I4db9bdf7386c48e17ed0373cf334ccff358d1951
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Below changes are done:
1. Rename below functions to have consistent naming:
set_host_ready() -> cse_set_host_ready()
wait_cse_sec_override_mode() -> cse_wait_sec_override_mode()
send_hmrfpo_enable_msg() -> cse_hmrfpo_enable()
send_hmrfpo_get_status_msg() -> cse_hmrfpo_get_status()
2. Additional debug messages are added in cse_wait_sec_override_mode().
TEST=Build and Boot hatch board.
Change-Id: Icfcf1631cc37faacdea9ad84be55f5710104bad5
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Below changes are implemented:
1. Move HFSTS1 register definition to SoC since HFSTS1 register definition
is specific to a SoC. Moving structure back to SoC specific to avoid
unnecessay SoC specific macros in the common code.
2. Define a set of APIs in common code since CSE operation modes and
working states are same across SoCs.
cse_is_hfs1_com_normal(void)
cse_is_hfs1_com_secover_mei_msg(void)
cse_is_hfs1_com_soft_temp_disable(void)
cse_is_hfs1_cws_normal(void)
3. Modify existing code to use callbacks to get data of me_hfs1 structure.
TEST=Build and Boot hatch, soraka, tglrvp, bobba and iclrvp boards.
Change-Id: If7ea6043d7b5473d0c16e83d7b2d4b620c125652
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
