summaryrefslogtreecommitdiff
path: root/src/soc/intel/tigerlake
AgeCommit message (Collapse)Author
2020-06-22mb/google/volteer: Override power limits with SKU-specific limitsTim Wawrzynczak
Using guidance from Intel, a new set of power limits (PL1, PL2 & PL4) are available for TGL-U. They are dependent upon the SKU of the CPU that the mainboard is running on. Volteer is updated here to use these new limits. To accomplish this, the SoC chip config's power_limits_config member was expanded to an array, which can be indexed by POWER_LIMITS_*_CORE macros. Just before power limits are applied, the correct set of them is chosen from the array based on System Agent PCI ID. Therefore, a TGL board should have two sets of power limits available in the devicetree. BUG=b:152639350 TEST=On a Volteer SKU4 (4-core), verified the following console output: CPU PL1 = 15 Watts CPU PL2 = 60 Watts CPU PL4 = 105 Watts Change-Id: I18a66fc3aacbb3ab594b2e3d6e2a4ad84c10d8f0 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-06-22soc/intel/tigerlake: Update platform.asl to ASL2.0 syntaxV Sowmya
This change updates platform.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for volteer. Change-Id: I248f5e9a1e3ba4f6426167f0406073252cc6513a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42506 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19soc/intel/tigerlake: Update TCSS for SW CM supportJohn Zhao
This change adds support for SW CM. Add Operating System Capabilities (_OSC) method to enable USB/DisplayPort/Inter-domain USB4 Internet Protocol tunneling and enable PCIe tunneling as well. Remove Connect Topology(CNTP) command because kernel driver directly works with SW CM Thunderbolt firmware. Update _DSD method for USB4 support across XHCI and PCIe root ports. BUG=b:140645231 TEST=Check Type C device all ports connection/enumeration with SW CM. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I859c5075882e40d7be30d4ba88cc825886712b74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-19tigerlake: add unique acpi device ids for dptfSumeet R Pawnikar
Add unique new acpi device ids for dptf for Tiger Lake soc based platforms and update volteer speficic dsdt.asl file accordingly. The Linux kernel driver expects these new acpi device ids for dptf functionalities. BUG=None BRANCH=None TEST=Build and boot on volteer system Change-Id: I7dbb812c0fc0f5084c98cf2752ce7ddce8e4d50e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-18soc/intel/tigerlake: Enable FSP-S compressionKarthikeyan Ramasubramanian
Use LZ4 compression technique to compress FSP-S. This provides some SPI ROM space savings (~36 KiB) in each CBFS. FSP-M is XIP and hence not compressed. LZ4 is chosen over LZMA since the decompression saves ~25 ms for an extra overhead of ~1KiB. LZ4 Compression: fsps.bin 0xe6fc0 fsp 254262 LZ4 (290816 decompressed) LZ4 Decompression: 17:starting LZ4 decompress (ignore for x86) 712,361 (1,072) 18:finished LZ4 decompress (ignore for x86) 750,695 (38,334) LZMA Compression: fsps.bin 0xe6fc0 fsp 253415 LZMA (290816 decompressed) LZMA Decompression: 15:starting LZMA decompress (ignore for x86) 707,696 (1,150) 16:finished LZMA decompress (ignore for x86) 767,763 (60,067) BUG=b:158034451 TEST=Build and boot volteer mainboard. Change-Id: I91e33eb7b688b5383f3a0075a28ac21250314973 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42444 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-17soc/soch/intel/tigerlake: Integrate PCIe hot-plug config UPDWonkyu Kim
This patch adds support for enabling/disabling PCIe hot-plug via a chip config option PcieRpHotPlug, which is copied to the corresponding FSP-S UPD. BUG=b:156879564 BRANCH=none TEST=Boot Volteer/RVP with FSP log and check hotplug enabled/disabled Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4c0187644b6ca9735f1b159e110e3466af14ff71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41794 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-16soc/intel/common: Replace smm_soutbridge_enable(SMI_FLAGS)Kyösti Mälkki
Change-Id: I8c4dc5ab91891de9737189bd7ae86df18d86f758 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-16arch/x86: Create helper for APM_CNT SMI triggersKyösti Mälkki
Attempts to write to APM_CNT IO port should always be guarded with a test to verify SMI handler has been installed. Immediate followup removes redundant HAVE_SMI_HANDLER tests. Change-Id: If3fb0f1a8b32076f1d9f3fea9f817dd4b093ad98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41971 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14soc/intel/tigerlake: enable CPU_INTEL_COMMONAlex Levin
Since we plan to use VMX, enable CPU_INTEL_COMMON. BUG=b:157388365 TEST=tested on Volteer Signed-off-by: Alex Levin <levinale@chromium.org> Change-Id: I5e7bdb4310947dd8a94ee554834a67ce94377ea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-12soc/intel/tigerlake: Add devicetree support to change PCH VR settingsVenkata Krishna Nimmagadda
For Tiger Lake platforms, this patch set provides a way to override PCH external VR settings and ext rail voltage/current through devicetree. This enables setting of optimal settings for FIVRs for a particular PCH type. BUG=None BRANCH=None TEST=Build and boot volteer. Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Ic55472d392f27d153656afbe8692be7e243bb374 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41424 Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10soc/intel/tigerlake: Add Hot-Plug and PME event handlers for ThunderboltJohn Zhao
This change adds Hot-Plug and power management event handers(_L61 & _L69) respectively for Thunderbolt in the GPE scope. The _L61 method invokes sub-method HPEV to support Hot-Plug wake event from Thunderbolt PCIe root ports. This method intercepts Presence Detect Changed interrupt and make sure the L0s is disabled on empty slots. The _L69 method checks and clears root port's PME SCI status. BUG=b:156435065 TEST=Verified multiple hot plug successfully with Lenovo dock. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I022cf4aa3f2ee459b9dc87849494e10755d995c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-06-10ACPI: Remove Kconfig COMMON_FADTKyösti Mälkki
Also remove default mb/*/fadt.c from Makefiles. Change-Id: I6a2839c524f8311ec9a382a84066afc7d579eaca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41948 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-09soc/intel/tigerlake: Set FSPS UPD ITbtConnectTopologyTimeoutInMsJohn Zhao
The Connect Topology Command(CNTP) is sent with default timeout value (0x1388) along with FW CM. The CNTP is supposed to be skipped while using SW CM. While transition from FW CM to SW CM, the default timeout value could cause boot time delay up to ~10 seconds. Set this FSPS UPD ITbtConnectTopologyTimeoutInMs to be 0 in order to avoid the 10 seconds delay. Future FSP release will evaluate this ITbtConnectTopologyTimeoutInMs value. While FSP finds this UPD value being 0, FSP will skip sending CNTP. BUG=b:155893566 TEST=Built image with SW CM Thunderbolt firmware and verified no outstanding delay time while using FSP v3197 during boot to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I47e3519fd818cb56e6abd16464d8370ffddabc5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/42056 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-09soc/intel/tigerlake: Increase heap sizeDuncan Laurie
With SoundWire and USB4 enabled some boards are running out of memory with all of the ACPI devices and properties. Increase the heap size to accommodate. BUG=b:147462631 TEST=Successfully boot on volteer SKU5 board with SoundWire enabled, before boot was failing with "Error! memalign: Out of memory" Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I0245bdfad93b381871514578e66640e7fe6fa5c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-08spd/lp4x: Set manufacturer part name to blank (0x20)Furquan Shaikh
As per JEDEC spec, manufacturer part name should be set to blank (0x20). This change updates gen_spd.go to set bytes 329-348 as 0x20 and regenerates SPDs for TGL and JSL. Change-Id: I6af18d89afd7264cec7e54b38e95df83d55aa058 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42023 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-07soc/intel/tigerlake/acpi: Update gpio_op.asl to ASL2.0 syntaxVenkata Krishna Nimmagadda
This change updates gpio_op.asl to use ASL2.0 syntax. This increases the readability of the ASL code. BUG=none BRANCH=none TEST="BUILD for Volteer" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Ib54b3f7da828ce8d232fcea0639077970638f610 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-06-06soc/intel/tigerlake: Add CPU ID for TGL B0Jamie Ryu
Reference: - TGL User Guide #613584 Rev 2.2 - TGL User Guide #605534 Rev 1.0 BRANCH=none BUG=none TEST=build and boot tglrvp Change-Id: I5da80fd4ad321b1ded369c2b6c039b73fcb3773e Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41516 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06lp4x: Add new memory parts and generate SPDsFurquan Shaikh
This change adds the following memory parts to LP4x global list and generates SPDs using gen_spd.go for TGL and JSL: 1. MT53E512M32D2NP-046 WT:E 2. K4U6E3S4AA-MGCR 3. H9HCNNNCPMMLXR-NEE 4. K4UBE3D4AA-MGCR BUG=b:157862308, b:157732528 Change-Id: Ib7538247d39dfe5faab277d646f87f09103d6969 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41989 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06soc/intel/tigerlake: Generate LP4x SPD files using gen_spd.goFurquan Shaikh
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to generate SPD files for currently known LP4x memory parts that can be used with TGL-based mainboards. Following files are added: 1. spd-*.hex: SPD files auto-generated by gen_spd.go 2. spd_manifest.generated.txt: Manifest file auto-generated by gen_spd.go Mainboards can use the SPD files from SoC directly when creating SPD binary to add to CBFS. BUG=b:147321551,b:155239397 Change-Id: Ic3935e4f6d106cbdf496fdfa28a0991e2d238fd9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-03soc/tigerlake: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I1731313798a4aadcbc17808bfe02b50bf8bd41db Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-03soc/intel/tigerlake: update elog to include CSME reset causesderek.huang
Call out the CSME-initiated bits from HPR_CAUSE0 register and update the elog to include reset causes Change-Id: I32ffb55ff2ad26ec4e7609c41fc65e021a327a14 Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-06-02soc/intel/common/{pch,sata}: Remove SATA common code driverSubrata Banik
Right now all FSP2.0 based IA platform doesn't need this driver anymore hence removing to avoid debug and maintenance effort. TEST=Verified booting from SATA on SPT/CNP/ICP/TGP PCH platforms. Change-Id: Ied3832b26ba1fdd4c30fafe8149689a01d302c3e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41674 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02src: Remove unused 'include <bootstate.h>'Elyes HAOUAS
Change-Id: I54eda3d51ecda77309841e598f06eb9cea3babc1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-02{icelake,jasperlake,skylake,tigerlake}/bootblock.c: Clean up includesElyes HAOUAS
Drop unused includes and add missing <intelblocks/systemagent.h>. Change-Id: I06c8b2bf65283c3c1fcd25fdaae298b82fc0e09c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-02src: Remove unused '#include <cpu/x86/lapic.h>'Elyes HAOUAS
Also, replace 'lapic.h' by 'lapic_def.h' in 'soc/intel/braswell/northcluster.c'. Change-Id: I71cff43d53660dc1e5a760ac3034bcf75f93c6e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41489 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-31soc/intel/tigerlake/acpi: Update pch_hda.asl to ASL2.0 syntaxVenkata Krishna Nimmagadda
This change updates pch_hda.asl to use ASL2.0 syntax. This increases the readability of the ASL code. BUG=none BRANCH=none TEST="BUILD for Volteer" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Ia2bab6dcbac9eae76ac4258c44bb19425c8b5c80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-05-31soc/intel/tigerlake/acpi: Update camera_clock_ctl.asl to ASL2.0Venkata Krishna Nimmagadda
This change updates camera_clock_ctl.asl to use ASL2.0 syntax. This increases the readability of the ASL code. BUG=none BRANCH=none TEST="BUILD for volteer" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: I6370e4b268331bfba5bc0392f27c560836b6ea72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-05-30soc/intel/tigerlake: Configure TcssDma0En and TcssDma1EnJohn Zhao
Determine the TcssDma0 and TcssDma1 enabling based on TBT DMA controllers setting. BUG=:b:146624360 TEST=Booted on Volteer and verified TcssDma0 and TcssDma1 enabling. lspci shows TcssDma0(0d.2) and TcssDma1(0d.3). Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I61ac4131481374e9a2a34d1a30f822046c3897fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/41812 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28soc/intel/tigerlake: Implement soc_get_pmc_mux_device()Tim Wawrzynczak
The ChromeOS EC is adding new entries to its USBC.CONx devices (see later patch), and it needs to get access to the PMC.MUX device so that its ACPI path can be retrieved. This provides a weak function to return NULL for all Intel SoCs except for Tiger Lake, which locates the device if it is found in the devicetree. Change-Id: I3fe3ef25e9fac8748142f5b1bd870c9bc70b97ff Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40948 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28soc/intel/tigerlake: Generate PMC ACPI device at runtimeTim Wawrzynczak
In an attempt to help reduce the amount of static ASL files that are littered throughout the codebase, pmc.asl was converted to runtime SSDT generation instead. If future SoCs reuse the same PMC, then this function can be moved to soc/intel/common/block/pmc for example. TEST=Verified the following was in the decompiled SSDT: Scope (\_SB.PCI0) { Device (PMC) { Name (_HID, "INTC1026") // _HID: Hardware ID Name (_DDN, "Intel(R) Tiger Lake IPC Controller") Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, 0xFE000000, // Address Base 0x00010000, // Address Length ) }) } } Also the following found in linux's /var/log/messages: "acpi INTC1026:00: GPIO: looking up 0 in _CRS", indicating the PMC ACPI device was found and its _CRS was locatable. Change-Id: I665c873d8a80bd503acc4a9f0241c7a6ea425e16 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/41408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-28soc/intel/tigerlake: Configure THCWonkyu Kim
Enable/Disable THCx though devicetree BUG=None BRANCH=None TEST=Boot and check FSP log for THC setting Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: If7683969161be67f68f441c28c80503de39079b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41571 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28soc/intel/tigerlake: Correct GPIO community PID configurationEric Lai
Current implementation returns the incorrect GPIO community PID. The GPIO community index 3 should return PID for COMM_4 and index 4 should return PID for COMM_5. TEST=Verify PCR port id is correct for each community. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5dc48e5b31f43853b3a613c17f13f7df71f1fbfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/41725 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28soc/intel/common: Improve Type16 SMBIOS tablesPatrick Rudolph
Use CAPID0_A to provide information closer to reality. * Correctly advertise ECC support, max DIMM count and max capacity * CAPID0_A hasn't changed since SNB, but most EDS mark the bits as reserved even though they are still used by FSP. * Assume the same bits for Tiger Lake as for Ice Lake * Assume the same bits for Skylake as for Coffee Lake * Add CAPID0_A to Icelake headers The lastest complete documentation can be found in Document: 341078-002. Change-Id: I0d8fbb512fccbd99a6cfdacadc496d8266ae4cc7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-05-27soc/intel/gma: Implement fsp_soc_get_igd_bar() in common codeNico Huber
`fsp/util.h` draws incompatible UDK headers in. Hence, we have to declare it locally again. Change-Id: Iaa5981088eeb5c36f765d6332ae47a38a6a4c875 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40729 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-27soc/intel/gma: Move display and opregion init to common codeNico Huber
Change-Id: I359b529df44db7d63c5a7922cb1ebd8e130d0c43 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40725 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-27drivers/intel/gma: Move IGD OpRegion to CBMEMNico Huber
It never was in GNVS, it never belonged among the ACPI tables. Having it in CBMEM, makes it easy to look the location up on resume, and saves us additional boilerplate. TEST=Booted Linux on Lenovo/X201s, confirmed ASLS is set and intel_backlight + acpi_video synchronize, both before and after suspend. Change-Id: I5fdd6634e4a671a85b1df8bc9815296ff42edf29 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40724 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26soc/intel/tigerlake: Remove MIPI clock setting from devicetreeSrinidhi N Kaushik
In Tiger Lake we have support for enabling MIPI clocks at runtime in ACPI. Hence remove setting pch_islclk from devcietree and chip.h. Also update functions which reference pch_isclk. BUG=b:148884060 Branch=None Test=build and boot volteer and verify camera functionality Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I6b3399172c43b4afa4267873ddd8ccf8d417ca16 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41570 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26soc/intel/tigerlake: Delete unused configurationWonkyu Kim
Delete below configuration - Heci3Enabled: deprecated, see https://review.coreboot.org/cgit/coreboot.git/tree/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h#n442 - PchIshEnable: don't need as it's handled by devicetree dev on/off, see https://review.coreboot.org/cgit/coreboot.git/tree/src/soc/intel/tigerlake/romstage/fsp_params.c#n87 BUG:b:151166877 BRANCH=none TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: If96cc7db7118dd6c2ac02aab3bb0c96763ffc722 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-26soc/intel/tigerlake: Disable VMDWonkyu Kim
It's already disabled by FSP default but disable VMD by devicetree to remove dependency with FSP default setting. BUG=None Branch=None Test=Build TGLRVP and boot up and check FSP log for checking VMD is disabled. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ief81fe481b94abed9754881cf1f454999fafa52e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41061 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26soc/intel/tigerlake: Add FSP UPD D3HotEnable and D3ColdEnableJohn Zhao
This adds FSP UPD D3HotEnable and D3ColdEnable for configuration. D3Hot low power mode support is for TCSS xhci, xdci, TBT PCIe root ports and DMA controllers. D3Cold is lower mode for TBT PCIe root ports and DMA controllers with D3Hot->D3Cold transition. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I6782cde6a1bfe13f46e75db8c85537c6d62f5d41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-26soc/intel/tigerlake: Fix wrong operation region for CPU to PCH methodJohn Zhao
CPU to PCH method refers to PCH ACPI operation region which was wrongly defined as SystemMemory and PCH_PWRM_BASE_ADDRESS. Change the operation region to be SystemIO and ACPI_BASE_ADDRESS. BUG=b:156530805 TEST=Built and booted to kernel. Signed-off-by: John zhao <john.zhao@intel.com> Change-Id: Ifa291a993ec23e1e4dfad8f6cdfabc80b824d20c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-23soc/intel/{jsl,tgl}: Override PRERAM_CBMEM_CONSOLE_SIZE default valueSubrata Banik
This patch increases PRERAM_CBMEM_CONSOLE_SIZE to fix *** Pre-CBMEM romstage console overflowed, log truncated! *** issue. TEST=Verified on TGL platform. Change-Id: Iae66b6a1260a9290b35d804487b7a07242c5ebc2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-22soc/intel/tigerlake: Provide SoundWire controller propertiesDuncan Laurie
The Intel Tigerlake SoundWire controller has 4 master links which are configured differently depending on the external crystal oscillator which is connected to the PCH. This function will read the PCH PMC EPOC register to determine the frequency and then fill out the master link entries with the correct table values. The frequency is also provided directly in a custom "ip-clock" property which will be added to the link descriptor and passed to the OS driver so it can know the clock rate of the master. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I98b7df21210c29cd8defeff648f2c2207d629295 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-22soc/intel/tigerlake: Add definition for PMC EPOCDuncan Laurie
The PMC EPOC register indicates which external crystal oscillator is connected to the PCH. This frequency is important for determining the IP clock of internal PCH devices. Add definitions that allow this register to be read and extract the crystal frequency, and a helper function to extract and return this as the defined enum. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I959fe507f3dbf93b6176b333a9e725ed09f56328 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40887 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20tigerlake: enable DPTF functionality for volteerSumeet R Pawnikar
Enable DPTF functionality for volteer platform BRANCH=None BUG=b:149722146 TEST=Built and tested on volteer system Change-Id: I385fb409ccd291d97369295ff99f21c9430880f9 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41427 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/tigerlake: Add TCSS devices to soc_acpi_name()Duncan Laurie
Add ACPI device names for TCSS devices which were not already defined which match those declared in the DSDT at acpi/tcss.asl. Change-Id: I6a79da7dd78c73345986c12d6ffe467cd4322e05 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-20soc/intel/tigerlake: Move pmc_soc_set_afterg3_en to pmutilTim Wawrzynczak
pmc.c was included in the SMM object, but only needed the one function, pmc_soc_set_afterg3_en. pmutil.c was already doing power management- related functionality, and was included in SMM, so moving pmc_soc_set_afterg3_en to pmutil.c allows pmc.c to be removed from the SMM build. Change-Id: I87f65fd10d35f1f75516e804501d5319b81a0383 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41407 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/tigerlake: Move PMC PCI resources under PMC deviceTim Wawrzynczak
Historically in coreboot, the PMC's fixed PCI resources were described by the System Agent (the MMIO resource), and eSPI/LPC (the I/O resource). This patch moves both of those to a new Intel SoC-specific function, soc_pmc_read_resources(). On TGL, this new function takes care of providing the MMIO and I/O resources for the PMC. BUG=b:156388055 TEST=verified on volteer that the resource allocator is aware of and does not touch these two resources: ("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 0 PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff flags c0000100 index 1") Also verify that the MEM resource is described in the coreboot table: ("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved") Verified the memory range is also untouchable from Linux: ("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved") Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20tigerlake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Tigerlake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on volteer system Change-Id: Iccd387d78bb45ca3de73f531a901d1d3f793d7bd Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39345 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/tigerlake: Add devicetree configurability for IomTypeCPortPadCfgBrandon Breitenstein
In order for the SOC to be able to control the Aux line orientation for Type-C ports that do not have a retimer, the IomTypeCPortPadCfg UPD needs to be configurable through devicetree to correctly set the GPIO pins that the SOC should use to flip orientation. BUG=b:145220205 BRANCH=NONE TEST=booted Volteer proto 2 and verified that the AUX channels flip when the cable is flipped Change-Id: I2e48adb624c7922170eafb8dfcaed680f008936e Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40244 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/tigerlake: Add FSP UPD TcssDma0En and TcssDma1EnJohn Zhao
This adds FSP UPD TcssDma0En and TcssDma1En for configuration. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I04af970f74ab9dfe84f9c0c09ec2098e0093fa57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-05-18soc/intel/tigerlake: Add PchHdaIDispCodecDisconnect overrideEric Lai
This is a missing config override in fspm_upd. iDisplay Audio Codec disconnection 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. BUG=b:156447983 TEST=None Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifbbc22d14e06713009c550cbe8a7292de64e1fdc Reviewed-on: https://review.coreboot.org/c/coreboot/+/41394 Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/tigerlake: Fix wrong operation region for CPU to PCH methodJohn Zhao
CPU to PCH method refers to PCH ACPI operation region which was wrongly defined as SystemIO. This causes ACPI AE_LIMIT error from PM _DSW method. Change the operation region from SystemIO to SystemMemory to resolve this execution failure. BUG=b:140290596 TEST=Built and booted to kernel. _DSW method executes successfully without ACPI AE_LIMIT error. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3965c3d891f7d3cf4a448edc0c3f7e7749a905a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/intel: Drop ABOVE_4GB_MEM_BASE_SIZE and use cpu_phys_address_size()Furquan Shaikh
This change uses cpu_phys_address_size() to calculate the size of high MMIO region instead of a macro for each SoC. This ensures that the entire range above TOUUD that can be addressed by the CPU is used for MMIO above 4G boundary. Change-Id: I01a1a86c0c65856f9f35185c2f233c58f18f5dfe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/intel/common/block/systemagent: Use TOUUD as base for MMIO above 4GFurquan Shaikh
This change sets the base for MMIO above 4G to TOUDD. It matches what is used by resource allocator if MMIO resources are allocated above 4G and also matches the expectation in northbridge.asl. This change also gets rid of the macro ABOVE_4GB_MEM_BASE_ADDRESS since it is now unused. BUG=b:149186922 TEST=Verified that kernel does not complain about MMIO windows above 4G. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ibbbfbdad867735a43cf57c256bf206a3f040f383 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41155 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12soc/intel/tigerlake: Correct IRQ interruptWonkyu Kim
Current Interrupt setting use 2nd parameters as device function number. - Correct as interrupt pin number according to _PRT package format. {Address, pin, Source, Source index} - Use irq number directly rather than irq definition as its number is not for PCI device. The issue found while enabling GBE and GBE interrupt is not working without this change. Reference - ACPI spec 6.2.13 _PRT - FSP reference code: https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/ ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/ PeiItssPolicyLibVer2.c - BIOS reference code: https://github.com/otcshare/CCG-TGL-Generic-Full/blob/master/ TigerLakeBoardPkg/Acpi/AcpiTables/Dsdt/PciTree.asl TEST=boot to OS with GBE enabled and check GBE interrupt Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8084b30c668c155ebabbee90b5f70054813b328e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41153 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12device/pci_device: Extract pci_domain_set_resources from SOCRaul E Rangel
pci_domain_set_resources is duplicated in all the SOCs. This change promotes the duplicated function. Picasso was adding it again in the northbridge patch. I decided to promote the function instead of duplicating it. BUG=b:147042464 TEST=Build and boot trembyle. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/intel/tigerlake: Control SATA and DMI power optimizationShaunak Saha
FSP provides the UPD's for SATA and DMI power optimization. In this patch we are adding the soc's config support to set those power optimization bits in FSP. By default those optimizations are enabled. To disable those we need to set the DmiPwrOptimizeDisable and SataPwrOptimizeDisable to 1 in devicetree. BUG=b:151162424 BRANCH=None TEST=Build and boot volteer and TGL RVP. Change-Id: Iefc5e7e48d69dccae43dc595dff2f824e53f5749 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11soc/intel/tigerlake: Update C-State infoWonkyu Kim
C-State latency table was exposed by both intel-idle driver and BIOS/coreboot. And table in Kernel was used before. After kernel patch (https://patchwork.kernel.org/patch/11290319/), only BIOS/coreboot exposes C-State latency table through _CST. As current C-State latency table info is not correct for Tigerlake, update proper info according to BWG and reference code. - Update latency: CpuPowerMgmt.h Use BIOS reference code as values in BWG is not up-to-dated - Remove MSR program for latency: BWG 4.6.4.3.4 Reference: - TGL BWG #611569 Rev 0.7.6 - https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/ ClientOneSiliconPkg/Cpu/Include/CpuPowerMgmt.h BUG=b:155223704 BRANCH=None TEST=Boot to OS and check C-State latency expected result >cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency} POLL C1_ACPI C2_ACPI C3_ACPI 0 1 253 1048 For detail, refer Bug info. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8bf2976ad35b4cf6f637a99c26b4f98f9f6ee563 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08soc/intel: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: I468d2ba85033c41ba53333ebbfd6f4108a36e407 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-07soc/intel/tigerlake: Add PMC to platform ACPI name entryJohn Zhao
PMC device name string "PMC" is added to platform soc_acpi_name() for pmc driver. BUG=b:151646486 TEST=Built and booted to kernel successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ida7fc7e2340f2a809464ca66fd1922f3229e2e18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: Move "is part of the coreboot project" line in its own commentPatrick Georgi
That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-06soc/intel/tgl: Synchronize GPIO ASL table with Linux kernelShaunak Saha
Kernel pinctrl driver changed for Tiger Lake and went to old scheme. Kernel patch: https://chromium-review.googlesource.com/c/chromiumos/ third_party/kernel/+/2116670 BUG=b:151683980 BRANCH=none TEST=Build and boot tgl board. In /sys/kernel/debug/pinctrl verify INTC34C5:00 listing all the pins. Cq-Depend:chromium:2116670 Change-Id: I9f1d399ff7380125ad5b935f9590a7d9cc442b04 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39801 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06soc/intel/tigerlake: Print HPR_CAUSE0 registerderek.huang
In addition to GBLRST_CAUSE0 and GBLRST_CAUSE1, print the value of HPR_CAUSE0. Change-Id: Idc57c3cd6a8d156c5544640898e8e7147d34c535 Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-05soc/intel/tigerlake: Add PMC mux controlJohn Zhao
PMC supports messages that can be used for configuring the USB Type-C Multiplexer/Demultiplexer. BUG=b:151646486 TEST=Booted to kernel on volteer board and verified PMC and Mux agent devices identification. Change-Id: I00c5f929b2eea5de3f8eba794dbe9b36c8083c52 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-04soc/intel/tigerlake: Update interrupt settingWonkyu Kim
Update interrupt setting based on latest FSP(3163.01) Reference: https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/ ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/ PeiItssPolicyLibVer2.c BUG=b:155315876 BRANCH=none TEST=Build with new FSP(3163.01) and boot OS and login OS console in ripto/volteer. Without this change, we can't login due to mismatch interrupt setting between asl and fsp setting. Cq-Depend: chrome-internal:2944102 Cq-Depend: chrome-internal:2939733 Cq-Depend: chrome-internal:2943140 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ibf70974b8c4f63184d576be3edd290960b023b1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40872 Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04src/soc/tigerlake: Update SerialIoDebugMode UPD in FSP-MSrinidhi N Kaushik
Due to refactoring of Serial IO code in FSP v3163 onwards we need to set SerialIoUartDebugMode UPD in FSP-M to SkipInit so that SerialIoUart initialization is skipped in FSP. This makes sure that SerialIo initialization in coreboot is not changed by FSP. BUG=b:155315876 BRANCH=none TEST=build and boot tglrvp/ripto/volteer and check UART debug logs Cq-Depend: chrome-internal:2944102 Cq-Depend: chrome-internal:2939733 Cq-Depend: chrome-internal:2943140 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I8ba4b9015fa25a84b6b99419ce4d413c9d9daa44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40899 Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-01soc/intel/{jsl,tgl}: Rename PcdDebugInterfaceFlags macros for better ↵Subrata Banik
understanding BIT 1 -> DEBUG_INTERFACE_UART_8250IO BIT 4 -> DEBUG_INTERFACE_LPSS_SERIAL_IO Change-Id: I566b9dc82b2289af42e58705ebeee51179886f1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-01soc/intel/tigerlake: Fill PcieRpClkReqDetect from devicetreeMeera Ravindranath
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree. Filling this UPD will allow FSP to enable proper clksrc gpio configuration. BUG=None BRANCH=None TEST=Build and boot tglrvp. Change-Id: Iad0ba94fea019623a5b98fff0cb4a2cd1d2a7bd7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-05-01src: Remove unused 'include <cpu/x86/cache.h>'Elyes HAOUAS
Change-Id: I2bf1eb87bb5476dd77b5a56dfe8846e82d414523 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40666 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/intel/tigerlake: Check SPD is not NULL before printEric Lai
Check SPD is not NULL before print. This can prevent the system from hanging up. BUG=b:154445630 TEST=Check NULL SPD is not print. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iccd9fce99eda7ae2b8fb1b4f3c2e635c2a428f04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40560 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29soc/intel/tigerlake: Add method to look up GPIO com ID for an indexVenkata Krishna Nimmagadda
This patch adds GPID, a helper method to look up GPIO community ID for an index. This patch also includes Intel's common GPIO ASL code. CGPM method in the common code uses the GPID method introduced in this patch. BUG=b:148892882 BRANCH=none TEST="BUILD volteer and ripto" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Id6a00fb8adef0285d6bbc35cd5a44539bd3be6b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40478 Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28soc/intel/tigerlake: fix call to print_spd_info()Nick Vaccaro
Pointer passed to print_spd_info() from meminit.c needs to be dereferenced first, so this change dereferences it. BUG=b:154352883 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer, login to kernel and execute the following cbmem command: localhost ~ # cbmem -c | grep LPDDR4X and verify it returns "SPD: module type is LPDDR4X" Change-Id: I5ff64121f0d50947c4946e9e02460dfb7319d01a Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-28device: Constify struct device * parameter to write_acpi_tablesFurquan Shaikh
.write_acpi_tables() should not be updating the device structure. This change makes the struct device * argument to it as const. Change-Id: I50d013e83a404e0a0e3837ca16fa75c7eaa0e14a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-04-25soc/intel/tigerlake: Fix FSP SPD index for DDR4Furquan Shaikh
For DDR4, FSP expects channel 0 to set SPD for index 0 and channel 1 to set SPD for index 4. This change adds a helper macro to translate DDR4 channel # to the index # that the FSP expects. BUG=b:154445630 TEST=Verified that memory initialization for DDR4 is successful. Change-Id: I2b6ea2433453a574970c1c33ff629fd54ff5d508 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-04-24soc/intel/tigerlake: Add ACPI GPIO opAlex Levin
Add acpigen methods which generate operations to get/set/clear RX/TX GPIOs. Verify it matches https://doc.coreboot.org/acpi/gpio.html. BUG=b:149588766 TEST=confirmed with touchscreen gpios. Signed-off-by: Alex Levin <levinale@chromium.org> Change-Id: Id9fe26f14a606ceedb9db02d76fe8d466d3a21af Reviewed-on: https://review.coreboot.org/c/coreboot/+/40550 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jes Klinke <jbk@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-22soc/intel/tigerlake: Configure TCSS power managementJohn Zhao
Add Type-C subsystem power management support for RTD3. BUG=b:140290596 TEST=Include "tcss.asl" in platform "dsdt.asl" for coreboot build with the firmware CM. Added acpi debug and booted to kernel. Probed devices PM_STATE transition from D0 to D3 entry/exit while system at S0. TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3, offset:0xA4, PM_STATE:D3HT. xhci:00:0d.0, offset:0x74, PM_STATE:D0D3. dma:00:0d.2/00.0d.3, offset:0x84, PM_STATE:PMST. Verified xhci/dma/pcie root ports power runtime_status to be suspended and suspended time tick through /sys/bus/pci/devices/bus:device:func/power. Change-Id: I127d3700ad426a44639ee93b4477be6638b42e1b Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-20soc/intel/tigerlake: Update iDisp Link UPD settingsSrinidhi N Kaushik
Remove explicit setting of iDisp Link parameters. These settings are related to configuration for the link between HD-Audio controller and Display unit for purposes of HDMI/DP Audio playback. During PO, observed that without setting these params display part was not binding. With the latest code verified that we dont need to explicitly set these parameters anymore. HDMI/DP audio playback works fine with default settings. BUG=b:151451125 BRANCH:none TEST= build and boot volteer/ripto and verify HDMI/DP audio playback Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jairaj Arava <jairaj.arava@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20soc/intel/tigerlake: Merge the recent change from other platformsWonkyu Kim
Merge the recent change from other platform(ICL/JSL). - Update SKpMpInit setting - Update APIs for getting dev info - Update IGD related setting - Update debug interface setting BRANCH=none TEST=build and boot ripto/volteer Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie4dd4bcef3d8afc71ae4a542dbe8e4ba385593cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/40349 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-17soc/intel/tigerlake: Remove eMMC/SD supportDuncan Laurie
Tigerlake platform does not have built in eMMC/SD support so all this code is unused and can be removed. Change-Id: I70ff983d175375171d5a649378f32f1062c0876d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40372 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-14soc/intel/tigerlake: Fix TCSS TBT PCIE root ports scope typeJohn Zhao
TCSS TBT PCIE root ports scope type was mistakenly set to PCI_ENDPOINT. Fix the scope type to be PCI_SUB. BUG=b:141609884 TEST=Booted to kernel and verified no TBT PCIE root ports scope type mismatch error in kernel log. Change-Id: I844e7e9583992be496223fb51f24c5aa24fc7d21 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-14soc/intel/tigerlake: Implement CHIPSET_LOCKDOWNWonkyu Kim
BUG=b:151161585 BRANCH=none TEST=build and boot ripto/volteer and check FSP logs for lockdown parameters Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I63cec8a718285f424914e426d0399ed821588dfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/39710 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-14soc/intel/tigerlake: Add function to dump ME firmware status informationKrishna Prasad Bhat
Add a function to dump ME Host Firmware Status registers. In tigerlake, Manufacturing mode is “No” if below conditions are satisfied, indicating end of manufacturing. Otherwise, manufacturing mode is "Yes". 1. Intel fuses are programmed (Indicated by HFSTS6[30] bit set) 2. The SPI flash descriptor region is locked. (Indicated by HFSTS1[4] cleared) BUG=None BRANCH=None TEST=Build and boot tglrvp. Change-Id: I831a51f9f482425bd3b97ef1d2404b1d06844d07 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-04-14soc/intel/{icl,tgl}: Make use of print_me_fw_version() from CSE libKrishna Prasad Bhat
Make use of print_me_fw_version() which is defined in the CSE lib to print ME firmware version information for icl,tgl. BUG=None BRANCH=None TEST=Build and boot iclrvp, tglrvp boards. Change-Id: Ief75403c490eee499a84372e54fa38ea3016cc11 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-04-14soc/intel/tigerlake: Configure RP settingWonkyu Kim
Add LTR and AER configuration to the root ports config. BUG=b:151166040 TEST= build and boot volteer and check LTR and AER value from FSP log Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I668f2e5fea15019a9e5ae06fb4d55fa2aea69e8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40262 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-13acpi: Bump FADT to revision 6Patrick Rudolph
Some of the revision 4 FADT fields were already updated to ACPI spec revision 6, but not all of them. In addition the advertised FADT revision was 3. Implement all fields as defined in version 6 and bump the advertised FADT revision to 6. Also set all used access_size fields and x_gpe0_blk to sane values as Windows 10 verifies those fields starting with FADT revision 5. Fixes: https://ticket.coreboot.org/issues/109 Tested on Windows 10. Change-Id: Ic649040025cd09ed3e490a521439ca4e681afbbf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-04-13soc/intel/tigerlake: Remove scs.aslAamir Bohra
Remove EMMC and SD card ACPI devices copied from Ice Lake. Tiger Lake does not support these controllers. BUG=b:151208782 TEST= Build volteer board Change-Id: I4b3e37f93b94757d16d775fb27bee644d9dc539e Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40228 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-11soc/intel/tigerlake: Disable MrcSafeConfigSrinidhi N Kaushik
This change disables MrcSafeConfig option during MRC training. MrcSafeConfig was enabled as part of the early testing. Now with FSP 2527, there is no need to set this config anymore. BUG=b:150357377 BRANCH=master TEST=build and boot ripto/volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I4e4069d83754aaf1e4885d6912ab2a6d506c5269 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40106 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-10Replace DEVICE_NOOP with noop_(set|read)_resourcesNico Huber
`.read_resources` and `.set_resources` are the only two device operations that are considered mandatory. Other function pointers can be left NULL. Having dedicated no-op implementations for the two mandatory fields should stop the leaking of no-op pointers to other fields. Change-Id: I6469a7568dc24317c95e238749d878e798b0a362 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40207 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-10Drop unnecessary DEVICE_NOOP entriesNico Huber
Providing an explicit no-op function pointer is only necessary for `.read_resources` and `.set_resources`. All other device-operation pointers are optional and can be NULL. Change-Id: I3d139f7be86180558cabec04b8566873062e33be Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40206 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-10soc/intel/tigerlake: Add support to initialize DDR4 MemoryVarun Joshi
Support to configure DDR4 memory variant. -Add support to read SPD data based on different memory topology. -Initialize FSP UPD's for DQ and DQS mapping. BUG=b:151702387 Signed-off-by: Varun Joshi <varun.joshi@intel.corp-partner.google.com> Change-Id: I47a5dcad3ee316871a6103b9d53ef7f6fc88d7d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39847 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-07soc/intel/tigerlake/acpi: Fix typo in HDA in commentSubrata Banik
HSA -> HDA (High Definition Audio) Change-Id: Ic0e6ad7b26105fdd6eca6cd11edcf2236e5c7123 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-07soc/intel/tigerlake: Allow mainboard to override DRAM part numberMarco Chen
In order to support mainboards that do not store DRAM part number in the traditional way i.e. within the CBFS SPD for soldered memory, this change provides a runtime callback to allow mainboards to provide DRAM part number from a custom location e.g. external EEPROM on volteer / dedede. For other boards it should be a NOP since the weak implementation of mainboard_get_dram_part_num does nothing. BUG=b:152019429 Change-Id: If940a76d36a7645a7441ba418aa7aec9af9f6319 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-06soc/intel/tigerlake: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I482715c166ccf5d2f3cc25118d25b07dbfd6650a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-04-05fsp2_0: Gather Kconfig declarationsNico Huber
Move more Kconfig declarations to drivers/intel/fsp2_0/ and document them properly. This way, we don't have to repeat dependencies and have the prompts in a common place. We can also easily hide the prompt for the header path in case the FSP repository is used. SP platforms were skipped as their Kconfig is too weird but they shouldn't hold other platforms back. Change-Id: Iba5af49bcd15427e9eb9b111e6c4cc9bcb7adcae Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 23:41:48 +0000