summaryrefslogtreecommitdiff
path: root/src/soc/intel/quark/Kconfig
AgeCommit message (Collapse)Author
2017-06-20soc/intel/quark: Add legacy SPI flash controller driverLee Leahy
Add SPI driver code for the legacy SPI flash controller. Enable erase and write support allowing coreboot to save non-volatile data into the SPI flash. TEST=Build and run on Galileo Gen2. Change-Id: I8f38c955d7c42a1e58728c728d0cecc36556de5c Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-06fsp1_1: Verify FSP_IMAGE_ID/_REV against headersNico Huber
FSP_IMAGE_ID and FSP_IMAGE_REV are defined in `FspUpdVpd.h`. Check against these to avoid mismatching definitions in coreboot and the FSP blob. Change-Id: Ic86229e7f0c2d0525b8a79add292c6c81a349aa6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-05-12commonlib: Move drivers/storage into commonlib/storageLee Leahy
Move drivers/storage into commonlib/storage to enable access by libpayload and indirectly by payloads. * Remove SD/MMC specific include files from include/device * Remove files from drivers/storage * Add SD/MMC specific include files to commonlib/include * Add files to commonlib/storage * Fix header file references * Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver * Add Kconfig source for commonlib/storage * Rename *DEVICE* to *COMMONLIB* * Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE* TEST=Build and run on Galileo Gen2 Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-08soc/intel/quark: Add SD/MMC test supportLee Leahy
The SD/MMC test support consists of: * Add Kconfig value to enable the SD/MMC test support. * Add Kconfig value to enable the logging support. * Add SD/MMC controller init code and read block 0 from each partition. * Add logging code to snapshot the transactions with the SD/MMC device. * Add eMMC driver for ramstage to call test code. * Add romstage code to call test code. * Add bootblock code to call test code. TEST=Build and run on Galileo Gen2 Change-Id: I72785f0dcd466c05c1385cef166731219b583551 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-14soc/intel/quark: Add ESRAM display to FSP 1.1Lee Leahy
Add ESRAM display to FSP 1.1 TEST=Build and run on Galileo Gen2 Change-Id: Ia47b0bdba65606a7f0695332d298fc1e910b0e2f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18804 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-04soc/intel/quark: Add monotonic timer supportLee Leahy
Add the Kconfig value HAVE_MONOTONIC_TIMER and the routine to read the TSC for the monotonic timer. Simplify the routine to get the TSC frequency. TEST=Build and run on Galileo Gen2 Change-Id: I806fb864b01e39277bf2d6276254b0543930c2f6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18002 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03soc/intel/quark: Add early debugging codeLee Leahy
Add Kconfig values and early debugging code to better segment and debug the early code in bootblock by using the SD LED as an indicator. Update the help text for the debug Kconfig values to point to the various failure locations. TEST=Build and run on Galileo Gen2 Change-Id: I1cd62eba3e9547cb1dd7f547aaec5d4827e14633 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03soc/intel/quark: Fix serial port configurationLee Leahy
Fix serial port configuration broken by how PCI configuration space was referenced introduced by change 3d15e10a (MMCONF_SUPPORT: Flip default to enabled). TEST=Build and run on Galileo Gen2 Change-Id: I2ab52cf598795e94f1f16977f8d12b7fdd95e146 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/17984 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-30soc/intel/quark: Support multiple version of FSPLee Leahy
Add support for multiple versions of FSP. BRANCH=none BUG=None TEST=Build FSP 1.1 (SEC/PEI core, with all FSP debug off) and run on Galileo Gen2 Change-Id: Ie7e7f0f883c4d3bfcb18fa25571e505cdde00b2d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16807 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add FSP 2.0 romstage supportLee Leahy
Add the pieces necessary to successfully build and run romstage using the FSP 2.0 build. Because romstage is using postcar, add the postcar pieces so that romstage can attempt to load postcar. TEST=Build and run on Galileo Gen2 Change-Id: I66b3437e3c7840223535f6ab643599c9e4924968 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15866 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add FSP 2.0 boot block supportLee Leahy
Add the pieces necessary to successfully build and run bootblock using the FSP 2.0 build. TEST=Build and run bootblock on Galileo Gen2 Change-Id: I2377f0b0147196f100396b8cd7eaca8f92d6932f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15865 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03soc/intel/quark: Make ramstage relocatableLee Leahy
Relocate ramstage into CBMEM. TEST=Build and run on Galileo Gen2 Change-Id: I38861f2af4b7b976c7ebb7226d81242f950981e3 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15994 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-01soc/intel/quark: Enable use of hard resetLee Leahy
Select HAVE_HARD_RESET in the KCONFIG file to enable use of the hard_reset routine. TEST=Build and run on Galileo Gen2 Change-Id: Ib11a80b64cf1c55aec24f2576d197da9017b9751 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15992 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27cpu/x86: Support CPUs without rdmsr/wrmsr instructionsLee Leahy
Quark does not support the rdmsr and wrmsr instructions. In this case use a SOC specific routine to support the setting of the MTRRs. Migrate the code from FSP 1.1 to be x86 CPU common. Since all rdmsr/wrmsr accesses are being converted, fix the build failure for quark in lib/reg_script.c. Move the soc_msr_x routines and their depencies from romstage/mtrr.c to reg_access.c. TEST=Build and run on Galileo Gen2 Change-Id: Ibc68e696d8066fbe2322f446d8c983d3f86052ea Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15839 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-08soc/intel/quark: Remove use of PDAT.bin fileLee Leahy
Remove the unused Kconfig values which specify the PDAT file, its location and inclusion into the coreboot file system. Remove the code in romstage which locates the pdat.bin file. TEST=Build and run on Galileo Gen2 Change-Id: I397aa22ada6c073c60485a735d6e2cb42bfd40ab Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15205 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-12soc/intel/quark: Add C bootblockLee Leahy
Add a bootblock which builds with C_ENVIRONMENT_BOOTBLOCK selected. This is the first piece in supporting FSP 2.0. Move esraminit from romstage into the bootblock. Replace cache_as_ram with car_stage_entry.S and code in romstage.c TEST=Build and run on Galileo Gen2 Change-Id: I14d2af2adb6e75d4bff1ebfb863196df04d07daf Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15132 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31quark: Enable HSUART0 as consoleLee Leahy
The use of HSUART0 on galileo requires early initialization of the I2C GPIO expanders to direct the RXD and TXD signals to DIGITAL 0 and 1 on the expansion connector. TEST=None Change-Id: I11195d79e954c1f6bc91eafe257d7ddc1310b2e7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
Allow the platform to override the input clock for the UART by implementing the routine uart_platform_refclk and setting the Kconfig value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk routine which is disabled when UART_OVERRIDE_REFCLK is selected. This works around ROMCC not supporting weak routines. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14612 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-09soc/intel/quark: Identify the console UARTLee Leahy
Pass the UART identifier to CorebootPayloadPkg Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: I9db1c31c3544d56b66f5a79ac8c3acee41788983 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04soc/intel/quark: Add USB PHY initializationLee Leahy
Add register access support using register scripts. Initialize the USB PHY using register scripts. TEST=Build and run on Galileo Gen2 Change-Id: I34a8e78eab3c7314ca34343eccc8aeef0622798a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10soc/intel/quark: Call FSP SiliconInitLee Leahy
Optionally relocate FSP into DRAM and then call FSP SiliconInit. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_FSP_ENTRY_POINTS" * Add "select DISPLAY_HOBS" * Optionally add "select RELOCATE_FSP_INTO_DRAM" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * FSP entry points are displayed and * The message "FspSiliconInit returned 0x00000000" is displayed and * The HOBs are displayed correctly and * The message "ERROR - Missing one or more required FSP HOBs!" is not displayed Change-Id: I91e660ea373a8bb00fc97fe8b760347cbfa96b1e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13631 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10soc/intel/quark: MTRR supportLee Leahy
Add the SoC specific routines to access the MTRR registers. These registers exist in the host bridge and are not accessible via the rdmsr/wrmsr instructions. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_MTRRS" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * The message "FSP TempRamInit successful" is displayed Change-Id: I7c124145429ae1d1365a6222a68853edbef4ff69 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13530 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-09soc/intel/quark: Enable Serial PortLee Leahy
Add the code to enable debug serial output using HSUART1: * Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1 * Note that the BIST value is always zero as validated in esram_init.inc * The initial TSC value is currently not saved! Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if serial output is present on HSUART1 at 115200 baud, 8-bit, no parity Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13445 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-08soc/intel/quark: Add TempRamInit supportLee Leahy
Successfully invoke TempRamInit from the FSP binary: * Don't relocate the FSP binary image * Copy the FSP binary into ESRAM * Specify Kconfig values to easily debug ESRAM and TempRamInit code * Specify the FSP binary file location * Specify the FSP binary image ID * Specify where in the flash image the FSP image must reside * Specify the FSP data file location * Specify where to place the FSP data file in the flash image * Specify where in the ESRAM the FSP image must reside Test 1 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select ENABLE_DEBUG_LED_FINDFSP" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Test 2 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Remove "select ENABLE_DEBUG_LED_FINDFSP" * Add "select ENABLE_DEBUG_LED_TEMPRAMINIT" * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13443 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-08soc/intel/quark: Enable ESRAMLee Leahy
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires that utils/xcompile/xcompile change the machine architecture from i686 to i586 to ensure that the Quark does not attempt to execute unsupported instructions: * Adjust Makefile.inc to add the RMU to the coreboot image * Add code to enable the ESRAM Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h file from the EDK2 tree (https://github.com/tianocore/edk2.git) to enable easy differences and correct issues in coreboot that were found in EDK2. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_RMU_FILE" * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Remove power from the board * Apply power to the board * Testing is successful if the SD LED is on indicating that the end of esram_init.inc was reached Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13440 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-04soc/intel/quark: Add minimal Quark SoC X1000 filesLee Leahy
Add the files for minimal Quark X1000 SoC support: * Declare pei_data structure * Declare sleep states and chipset_power_state structure * Specify top of memory * Empty FspUpdVpd.h file TEST=None Change-Id: If741f84904394780e1f29bd6ddbd81514c3e21c9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 17:11:33 +0000