summaryrefslogtreecommitdiff
path: root/src/soc/imgtec
AgeCommit message (Collapse)Author
2015-04-22soc: select generic gpio lib on (almost) all non-x86 SOCsStefan Reinauer
BOARD_ID functionality is not what requires the GPIO lib, but it is the mainboard specific implementations that do. The option essentially says whether the SoC provides <soc/gpio.h> (with the interface required by the common GPIO code). Right now, x86 and Samsung's Exynos SOCs don't have support for this interface. So this should be selected by the SOC, not by BOARD_ID_SUPPORT. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> BUG=none BRANCH=none TEST=emerge-storm coreboot still successfully compiled an image Change-Id: I0ce2bd7ce023f22791d31a6245833b61135504b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0dd4dea521372194eedf11b077d95fd3b15ad9f7 Original-Change-Id: I3dea6c2fb42a23fcb9d384c3bbfa7fc8e217be2d Original-Reviewed-on: https://chromium-review.googlesource.com/262743 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9899 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22imgtec/pistachio: increase RAM CBFS cache sizeVadim Bendebury
CBFS cache use is very close to the limit, does not allow to read much more from CBFS. BRANCH=none BUG=chrome-os-partner:36586 TEST=the upcoming patches do not fail due to the lack of room in CBFS cache any more Change-Id: I8e784891e59ca284b3bd82557c2114a2f450d8a3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c94d55c8042db81c1eb0c10d5f24883e00cdc19a Original-Change-Id: Ic09dbd5b4a0e165ccef396ff8a9e21b12c49b705 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/263268 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21pistachio: Remove 50% DDR bandwidth restrictionIonela Voinescu
The existing DDR setup configures the burst length to be 8. However the DDR controller can only be given sufficient data per clock to satisfy a burst length of 4, hence the bursts are only half populated. This results in a 50% drop of efficiency. Fix this by configuring the burst size to 4. BUG=chrome-os-partner:31438, chrome-os-partner:37087 TEST=tested on Pistachio bring up board -> DDR initialized properly and ramstage executed correctly BRANCH=none Change-Id: I761ba73a04688841ca39a370b7cb99b6e0b22964 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0e590ab8387dbbccef45dc84d1eeafee2abc9e2e Original-Change-Id: I585385b65e330624ad70292349e50c6695eeeb6c Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256305 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9847 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21pistachio: Decrease DDR ODT from 75R to 50RIonela Voinescu
The DDR On Die Termination was incorrectly configured at 75R, where as the data sheet suggests for DDR2-800 it should be set to 50R. Correct this by adjusting the ODT setting in the EMR register. BUG=chrome-os-partner:31438, chrome-os-partner:37087 TEST=tested on Pistachio bring up board -> DDR initialized properly and ramstage executed correctly BRANCH=none Change-Id: I2f0242c422b1cb3d1f64ce3dd17b62fef5e7e155 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ac081ac59c0dc3d16a7b540cd379fb870b6cfe40 Original-Change-Id: If7951812033c4e88f4be3c143fb49526eddba142 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256304 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9846 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21pistachio: clean DDR2 initialization codeIonela Voinescu
The proper way to initialize DDR2 is for the PHY to automatically establish precise timing configuration through the training process. The alternative (used initially for testing) is no longer needed. This change determined the removal of some local variables as they ended up being used in one location only. BUG=chrome-os-partner:31438, chrome-os-partner:37087 TEST=tested on Pistachio bring up board -> DDR initialized properly and ramstage executed correctly. BRANCH=none Change-Id: I31e9a8975d176a04061f9c84fe06cce850bb53b9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e28f3ef9a22436bb0fa949df6f5a5c6a67002dfd Original-Change-Id: Ifb9c1bb6e0b71af72340381bd2349850d1b4af2d Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256303 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9845 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21pistachio: add clock setup for all I2C interfacesIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; all I2C interfaces were tested with the TPM and they all work properly. BRANCH=none Change-Id: I02202585140beb818212c02800f6b7e4966a922a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 33b2adecc4939ac73fffba47adf1c8306a888b8d Original-Change-Id: Ida7eaa72d4d6e6b034319086410de5baa63788bc Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256361 Original-Reviewed-by: Chris Lane <chris.lane@frontier-silicon.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9839 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21urara: Identity map DRAM/SRAMAndrew Bresticker
Using identity_map(), map the DRAM/SRAM regions to themselves (which happens to be using KUSEG on urara). The bootblock (which still runs in KSEG0) sets up the identity mapping in bootblock_mmu_init() so that ROM/RAM stages can be loaded into the KUSEG address range. The stack and pre-RAM CBMEM console also remain in KSEG0 since we don't really care about their physical addresses. Also splitting CBFS cache to pre and post RAM, to allow for larger rambase images. BUG=chrome-os-partner:36258 BRANCH=none TEST=With the rest of coreboot and depthcharge patches applied: - booted urara into the kernel login prompt - from depthcharge CLI tried accessing memory below 0x100000 - observed the exception. Change-Id: If78f1c5c54d3587fe83e25c79698b2e9e41d3309 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9668b440b35805e8ce442be62f67053cedcb205e Original-Change-Id: I187d02fa2ace08b9fb7a333c928e92c54465abc2 Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/246694 Reviewed-on: http://review.coreboot.org/9816 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21imgtec/pistachio: Add spi_crop_chunk()Patrick Georgi
This was added in upstream but not in Chromium OS where pistachio support was developed. Change-Id: I54f883776f19aa7bd357841731166e92d03145d8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9808 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17pistachio: Move console UART to a Kconfig variableDavid Hendricks
This allows us to define the serial console UART on a per-board basis. BUG=chrome-os-partner:31438 BRANCH=none TEST=built and booted on urara w/ follow-up patches Change-Id: Idbb0d39bf8855df4312f7499c60b8b92826fdd07 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ed4cfdd5ed6ccbf87a50f56d3e07f2f1a9d49464 Original-Change-Id: I3faeb92f026062cded390603a610e5b8f7c9bc12 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/243211 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/9777 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-04-17pistachio: add DDR2 initialization codeIonela Voinescu
This is the intialization code specific to the Winbond W972GG6JB-25 part using Synopsys DDR uMCTL and DDR Phy. This is DDR2 initialization code only (currently present on the bring up board). DDR3 initialization code will follow for boards having DDR3 memory. The programming procedure that is executed at power up to bring up the uMCTL, PHY and memories into a state where reads and writes to the memory can be performed is the following: 1. uPCTL (Universal DDR protocol controller) initialization The timining registers TOGCNT1U, TINIT, TOGCNT100N and TRSTH needed for driving the memory power-up sequence are programmed as a function of the internal timers clock frequency. Organization (memory chip specific) values are set (column/bank/row address width and number of ranks), together with other static values (latency, timing, power up configuration). All these values are static, provided by the datasheet, being determined by the memory type, size and frequency. 2. PHY initialization The PHY is programmed with datasheet provided values, specifying the initialization values for it to send to the external memory (timing parameters). Also, delay lines (DLL) and strength of drive pads are calibrated (based on external conditions: temperature, voltage, noise) and locked. After that, the PHY goes through a trainig process (also dependent on the current conditions at boot time) to establish precise timing configuration between the DDR clock and DQS (data strobe) and between DQS and DQ (data). 3. Memory power up 4. Switch from configuration state to access state. BUG=chrome-os-partner:31438, chrome-os-partner:37087 TEST=tested on Pistachio bring up board -> DDR initialized properly and ramstage executed correctly DDR2 is also tested during chip sort. Corner cases (performace of DDR in different conditions) will be tested after the chip reaches a stable state. BRANCH=none Change-Id: I0093dc175d064aad03052d5281679b008c1bf012 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3d0bacea0fd5bd3b12008b47e80de8398f447785 Original-Change-Id: I8437db6c84d77c4c51a3ee2b09cd3d14913c0d16 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241424 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9769 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-17pistachio: report UART register widthVadim Bendebury
Pistachio UART closely matches 8250, the only difference is that its register file is mapped to a 32 bit bus. Provide a function to report register with so that the Coreboot table entry gets correct value. BRANCH=none BUG=chrome-os-partner:31438 TEST=with the rest of the patches integrated depthcharge console messages show up when running on the FPGA board Change-Id: Icd72b115b4f339800d6c8b210a6617398232f806 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e1dc4156949b20efafbca2c19ff424436a400087 Original-Change-Id: Icafb014af338e05bbf1044b791683733685ffab3 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/240028 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9740 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17uart: pass register width in the coreboot tableVadim Bendebury
Some SOCs (like pistachio, for instance) provide an 8250 compatible UART, which has the same register layout, but mapped to a bus of a different width. Instead of adding a new driver for these controllers, it is better to have coreboot report UART register width to libpayload, and have it adjust the offsets accordingly when accessing the UART. BRANCH=none BUG=chrome-os-partner:31438 TEST=with the rest of the patches integrated depthcharge console messages show up when running on the FPGA board Change-Id: I30b742146069450941164afb04641b967a214d6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42 Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/240027 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9738 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: implement clock setup for I2C0Ionela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; I2C0 clock is set up properly. BRANCH=none Change-Id: I15ffc5f7d8e8aadfc3cd249284bc492d0d13d9a1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 6404ab6ad12ea1579eaf5ae55a9eddd9bd9f96e2 Original-Change-Id: Iafdf492291b47f0088f3b5e621d630b8d21ab106 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/250450 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9673 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: Fix ROM clock base addressIonela Voinescu
The base address used was TOP CLOCK control address instead of the PERIPH CLOCK CONTROL. That was incorrect and is fixed with the current patch. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; now the hash accelerator, fed by this clock, is correctly clocked at 200MHz. BRANCH=none Change-Id: I0ead3951dc1dfc872881b8d1ae9b63f8104af50d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 871cb50ca43a6c760f346eb447e8ff102d8ca0b6 Original-Change-Id: I198d64f97a85a6fcf00c3853bf23d2d767e0e631 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245313 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9670 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ie386d6af9eeba7a72b1b88d515e6cb1821569c6b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: d4b8d8b6f965296f9ecf62da8e5f383c3667b077 Original-Change-Id: I9eb464340b0475ae735ba5573ab0841dac0d74eb Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243215 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9669 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: fix clocks setup codeIonela Voinescu
Some of the asserts were not done properly: the value has to be shifted before is matched with the mask. Added condition to exit while loop for USB clock setup. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; after this patch is applied none of the asserts fail and the code is executed properly. BRANCH=none Change-Id: Ib3aae9f7751a9f077bc95b6e0f9d63e3e16d8e4b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 96999a4322ba98e87bc6746ad05b30cc56704e2e Original-Change-Id: I8d2d468d618ca1ffcb1421409122482444e6d420 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243214 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9667 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: Use 1.8433179 MHz for UART refclkDavid Hendricks
BUG=chrome-os-partner:31438 BRANCH=none TEST=built and booted on urara w/ follow-up patches Change-Id: I3b03ce937e68539343e58b01e3bb714dd1f8c2dd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 9493c57a14c8ab074baac1c065c6f39050dd9b2f Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I8e50c99913ea155ba0d5699f4789c1fe38b46808 Original-Reviewed-on: https://chromium-review.googlesource.com/243210 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/9666 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: increase size of bootblock to 18 KBIonela Voinescu
With the added code for clock and MFIOs setup, bootblock now exceeds 16KB. This patch increases the allowed limit to 18KB. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works as expected BRANCH=none Change-Id: I166f882bd3db446bcd6f9e1f828cab22266c6ac7 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: da95db5ed348419b7905dc1ab68fd64d7b2eb5e0 Original-Change-Id: I0cacc6163f21ae3673c2716b12dde66bd48290f9 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243213 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9665 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: change memory layout as to allow bigger CBFS cacheIonela Voinescu
As the payload increases in size, a bigger CBFS cache is required. Therfore, bootblock, romstage and the cbfs cache were placed in GRAM (128 K) and the stack and cbmem console were moved to SRAM (64 K). With the exception of CBFS cache, the sizes of all the other regions remains the same. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA and bring up board; behavior was as expected. BRANCH=none Change-Id: I19857f785ca1514f7483d582c7ad6ee470a8fefc Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c895660dbdcd113bdc9d832beab30886313c28d6 Original-Change-Id: I004f8f081d04f83e3f5cee969e50803685cfdf67 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236551 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9664 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: spi: use same clock edge for RX and TXIonela Voinescu
When using this mode data is received and transmitted on the same edge of the SPFI clock, which allows for higher frequencies of operation. In this mode the maximum supported frequency is 50Mhz. If this mode is not enabled the maximum supported frequency is 25Mhz. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; the SPFI hardware block is fed by the system clock (with a fixed freqency of 400 MHz). To achieve the SPFI frequency of 50MHz the internal divider of SPFI must be set to 64. To achieve a frequency of 25 Mhz the internal divider must be set to 32. A value of 64 = division by 8 A value of 32 = division by 16 BRANCH=none Change-Id: Ifd5f739b6157b99e4c1f92b5bb72615ee610ae6c Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 8b6cce616ec7926682d4eff096563acf1dfd6c65 Original-Change-Id: I337b6fcf462bcf6021ca77a8b1133cf49140ba76 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241425 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9663 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
Set elements: - UART1 clock dividers and MFIOs - SPIM1 clock dividers and MFIOs - USB clock dividers - System clock divider - System PLL - MIPS CPU PLL BUG=chrome-os-partner:31438 TEST=tested on Pisachio bring up board; UART, SPI NOR, SPI NAND, and USB have proper functionality. BRANCH=none Change-Id: Ib01186a652fd59295a4cafc3ca99b94aa9564f74 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 65e68d82f34bb40ef3cfb397ecf5df0c83201151 Original-Change-Id: Ia2c31bbbfc020dc4fd71c72b877414adfdfc42a8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241423 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9662 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
Non-x86 boards currently need to hardcode the position of their CBFS master header in a Kconfig. This is very brittle because it is usually put in between the bootblock and the first CBFS entry, without any checks to guarantee that it won't overlap either of those. It is not fun to debug random failures that move and disappear with tiny alignment changes because someone decided to write "ORBC1112" over some part of your data section (in a way that is not visible in the symbolized .elf binaries, only in the final image). This patch seeks to prevent those issues and reduce the need for manual configuration by making the image layout a completely automated part of cbfstool. Since automated placement of the CBFS header means we can no longer hardcode its position into coreboot, this patch takes the existing x86 solution of placing a pointer to the header at the very end of the CBFS-managed section of the ROM and generalizes it to all architectures. This is now even possible with the read-only/read-write split in ChromeOS, since coreboot knows how large that section is from the CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be changed on systems that place other data next to coreboot/CBFS in ROM). Also adds a feature to cbfstool that makes the -B (bootblock file name) argument on image creation optional, since we have recently found valid use cases for CBFS images that are not the first boot medium of the device (instead opened by an earlier bootloader that can already interpret CBFS) and therefore don't really need a bootblock. BRANCH=None BUG=None TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco. Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229975 Reviewed-on: http://review.coreboot.org/9620 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13spi: support controllers with limited transfer size capabilitiesVadim Bendebury
Some SPI controllers (like Imgtec Pistachio), have a hard limit on SPI read and write transactions. Limiting transfer size in the wrapper allows to provide the API user with unlimited transfer size transactions. The tranfer size limitation is added to the spi_slave structure, which is set up by the controller driver. The value of zero in this field means 'unlimited transfer size'. It will work with existion drivers, as they all either keep structures in the bss segment, or initialize them to all zeros. This patch addresses the problem for reads only, as coreboot is not expected to require to write long chunks into SPI devices. BRANCH=none BUG=chrome-os-partner:32441, chrome-os-partner:31438 TEST=set transfer size limit to artificially low value (4K) and observed proper operation on both Pistachio and ipq8086: both Storm and Urara booted through romstage and ramstage. Change-Id: Ibb96aa499c3eec458c94bf1193fbbbf5f54e1477 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 4f064fdca5b6c214e7a7f2751dc24e33cac2ea45 Original-Change-Id: I9df24f302edc872bed991ea450c0af33a1c0ff7b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/232239 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9571 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13urara: add support for DMA coherent memory areaIonela Voinescu
The information about the DMA memory area is further passed through the coreboot table to the payload. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA; DMA memory area was used to test the functionality of the DWC2 USB controller driver; behavior was as expected. BRANCH=none Change-Id: I658e32352bd5fab493ffe15ad9340e19d02fd133 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0debc105b072a37e2a8ae4098a9634d841191d0a Original-Change-Id: Icf69835dc6a385a59d30092be4ac69bc80245336 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/235910 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9593 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13pistachio: increase the size of romstage to 36KIonela Voinescu
This is necessary for the subsequent changes that will add to the size of romstage. BUG=chrome-os-partner:31438 TEST=coreboot builds successfully;tested on Pistachio FPGA BRANCH=none Change-Id: I132215bd44708913d878bbd8b6147bef535b52df Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 00f73f9d80a36fc43735f093365564b9d74ed7f7 Original-Change-Id: Ie858416a1c9ab63cfe85eea40a76a093cbd2c79c Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/233871 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9589 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-09pistachio: add timer frequency for SOC; correct platform IDIonela Voinescu
Corrected platform ID and added timer frequency for SOC. The timer frequency is half the CPU frequency. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; behaves as expected. BRANCH=none Change-Id: If7e03232106b52f2522fc7da586bdaf95f5eefec Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: d94789950d5300bbe5defbf529480d8d545e743e Original-Change-Id: I1187e4b5280eaf796777d882a2e154e2808e9e37 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241426 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9193 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-09pistachio: add SOC descriptorVadim Bendebury
With this descriptor added ramstage properly allocates memory resources and creates entries in coreboot table. This also allows to proceed to booting depthcharge, as it now can be loaded into the existing memory. BRANCH=none BUG=chrome-os-partner:31438 TEST=with the set of patches applied the firmware properly finds depthcharge in CBFS, uncompresses it and attempts to start: ... Booting payload fallback/payload from cbfs Loading segment from rom address 0x9b000058 code (compression=1) New segment dstaddr 0x80124020 memsize 0x2099a0 srcaddr 0x9b000090 filesize 0xbbe Loading segment from rom address 0x9b000074 Entry Point 0x80124038 Loading Segment: addr: 0x0000000080124020 memsz: 0x00000000002099a0 filesz: 0x0000000000000bbe lb: [0x0000000080000000, 0x0000000080013858) Post relocation: addr: 0x0000000080124020 memsz: 0x00000000002099a0 filesz: 0x0000000000000bbe using LZMA [ 0x80124020, 8012596c, 0x8032d9c0) <- 9b000090 Clearing Segment: addr: 0x000000008012596c memsz: 0x0000000000208054 dest 80124020, end 8032d9c0, bouncebuffer 8ffd4f50 Loaded segments BS: BS_PAYLOAD_LOAD times (us): entry 129 run 34579421 exit 129 Jumping to boot code at 80124038 ERROR: dropped a timestamp entry CPU0: stack: 9a00c800 - 9a00d800, lowest used address 9a00d498, stack used: 872 bytes entry = 80124038 Change-Id: I15809e146407d66b04f2a97c47c961fdccb8e175 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a1577c5532a064426a3ea88b6f7f30ccdae24eaf Original-Change-Id: Ifed5550f2c18430e9ae06ad1ecacaa13191b5995 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/232571 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9192 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-09pistachio: modify memory layoutVadim Bendebury
With the code now running on the FPGA board it makes sense to correct the memory layout definitions to match the actual hardware. Note that the latest FPGA board firmware introduced support of the additional 128KB of SRAM (called GRAM) at base address of 0x9a000000. These are still interim values, which will be tweaked when the actual bring up board is available. BRANCH=none BUG=chrome-os-partner:31438 TEST=the code put into SPI NOR flash boots all the way to ramstage. Change-Id: I00aa5bc3aabba50df2187bb208cf2fcd11b26b3d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a6378be5cd304744b40c57a34d7a276233d45779 Original-Change-Id: I50183c2d5f9017801d5c8a7a7addf08efa492b35 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229203 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9337 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-09pistachio: set correct CBMEM top addressVadim Bendebury
This is required for proper dynamic CBMEM operation. BRANCH=none BUG=chrome-os-partner:31438 TEST=urara ramstage does not crash anymore in CBMEM initialization Change-Id: Id8e001be20fc245c91b2639f89775e594b0de966 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: b7c6e4090d76a172c269bff002428015cc8aac8a Original-Change-Id: I5d44907443724891c8cff805208a7a3bb8e36752 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/232292 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9191 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-09pistachio: allow more room for bootblockVadim Bendebury
32K is a more appropriate room for Pistachio bootblock. BRANCH=none BUG=chrome-os-partner:31438 TEST=there is no bootblock overflow even when compiled with -O0. Change-Id: I454746ce0b9daabc93ccbf3316655fac836af8ff Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 56adf22ba12f5a7c69d11c0c720996de32ca9149 Original-Change-Id: I74b6674aea95b1138e2168527239e2cfb4a7ad42 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/232291 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9190 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-09pistachio: implement timer supportVadim Bendebury
C0_COUNT register is a free running counter clocked by the CPU frequency divided by two. On the FPGA board it results in 25 MHz, on real SOCs it will have to be figured out later. Some magic addresses and numbers are used to find out if the code is running on the FPGA board. timestamp_get() and timer_monotonic_get() are kept in the same file. The CPU initialization makes sure that CO COUNT is in fact enabled and starts from zero. BRANCH=none BUG=chrome-os-partner:33595,chrome-os-partner:31438 TEST=with timer enabled, the startup code properly initializes UART and prints the coreboot bootblock banner message on the serial console. Change-Id: I98fe330b961f677448b222917ab7d586494ed4b7 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a7324221c1d856ac72fa2b0ab586b5ea8cab3a05 Original-Change-Id: I2d518213de939e91a35f8aea174aed76d297dd72 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/227888 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9188 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-07pistachio: Change all SoC headers to <soc/headername.h> systemJulius Werner
This patch aligns pistachio to the new SoC header include scheme. Also alphabetized headers in affected files since we touch them anyway. BUG=None TEST=Tested with whole series. Compiled Urara. Change-Id: I0609b307695ba6a922384ac34dd604bffcb20692 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0a577918babf26adf10baa0f56a7065f5659d285 Original-Change-Id: I3ed405a3efdeec28965538d19a22f2b5b8204f01 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224503 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9335 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
With kconfig understanding wildcards, we don't need Kconfig files that just include other Kconfig files anymore. Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9298 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-04-02pistachio: add gpio type definitionVadim Bendebury
This is necessary to support generic gpio interface in src/lib. This file will be later populated with more GPIO definitions. BRANCH=none BUG=chrome-os-partner:31438 TEST=none Change-Id: I3fa93f1b3b1ce99d921bbfb378b3f7ae4eb652c2 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 26f564ee10a770d57cb4af0a8ab5a264aaf1a7cd Original-Change-Id: I68c9c3a28fcc747575436b502cb25b31afed8700 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226181 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9184 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-02urara: Fix CBFS header definitionsVadim Bendebury
Urara CBFS header configuration is broken. CBFS header needs to be right above the bootblock, and the CBFS data - 0x100 bytes above, to allow room for proper CBFS wrapper structures. Ideally only the header offset should be specified (and even that could be derived from the bootblock size). But this is a more generic problem to be addressed with different architectures' image layout requirements in mind. BRANCH=none BUG=chrome-os-partner:31438 TEST=coreboot image passes the integrity check now (it was failing before because CBGS header was overlaying the bootblock) $ FEATURES=noclean emerge-urara coreboot $ /build/urara/tmp/portage/sys-boot/coreboot-9999/work/coreboot-9999/build/util/bimgtool/bimgtool \ /build/urara/firmware/coreboot.rom.serial $ cbfstool /build/urara/firmware/coreboot.rom.serial print coreboot.rom.serial: 1024 kB, bootblocksize 9956, romsize 1048576, offset 0x4100 alignment: 64 bytes, architecture: mips Name Offset Type Size fallback/romstage 0x4100 stage 7100 fallback/ramstage 0x5d00 stage 18995 config 0xa780 raw 2452 (empty) 0xb140 null 1003096 Change-Id: Id615bdcc6261dea9f36a409bd90f1e4764353bb9 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 8a0115963aa7460e4c7255ab8508d7d52d67fb67 Original-Change-Id: Id200ab5421661ef39b7c7713e931c39153fdc8be Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/227523 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/9187 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-03-30imgtec/pistachio: Bring uart driver to modern standardsPatrick Georgi
The console interface changed in upstream, and the driver didn't reflect that yet. This wasn't obvious because the driver wasn't compiled at all. Change-Id: Id18391e62e7ebd8f5fc929838ce27bf414e364f9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/9165 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-28pistachio: don't open code ramstage loadingAaron Durbin
Use the run_ramstage() function to load and run ramstage. Change-Id: I783801bf506fa2f9608eefe1cd20257292c80af5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9148 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-03-27soc/imgtec/pistachio: Add IMGTEC SPI controller driverIonela Voinescu
The Serial Peripheral Flash Interface (SPFI) block allows communication with various devices over the SPI bus. It uses a configurable transaction interface and it clocks the bus according to the configured command, address, gap (aka dummy) and data lengths. This controller requires the SPI_ATOMIC_SEQUENCING flag set (write and read done in the same transaction) as it cannot directly control CS and will assert/de-assert CS at the beginning/end of a transaction itself. Note that the size of any transfer cannot be greater than 64KB - 1, as this is configured in a 16-bit field. The SOC has 2 SPFI interfaces each of them providing 5 slave select lines. SPFI 0 supports single and dual modes, SPFI 1 supports single, dual and quad modes. For SPFI interface 0: - The block needs the system PLL and the following top level SPI clock registers to be set: - CR_cr_top_spi0clkinternal_CTRL[2:0] with division value - CR_MIPS_CLOCK_GATE[19]: bit cr_top_SPI0CLKOUT_MIPS set - CR_cr_top_SPI0CLKOUT_CTRL[6:0] with division value - The following MFIO configuration parameters are also required: Signal name Pad name MFIO mode spim0_d0_txd MFIO_MIPS_10 0 spim0_d1_rxd MFIO_MIPS_9 0 spim0_mclk MFIO_MIPS_8 0 spim0_cs0 MFIO_MIPS_2 1 spim0_cs1 MFIO_MIPS_1 1 spim0_cs2 MFIO_MIPS_55 1 MFIO_MIPS_28 1 spim0_cs3 MFIO_MIPS_56 1 MFIO_MIPS_29 1 spim0_cs4 MFIO_MIPS_57 1 MFIO_MIMPS_30 1 For SPFI interface 1: - The block needs the system PLL and the following top level SPI clock registers to be set: - CR_cr_top_spi1clkinternal_CTRL[2:0] with division value - CR_MIPS_CLOCK_GATE[20]: bit cr_top_SPI1CLKOUT_MIPS set - CR_cr_top_SPI1CLKOUT_CTRL[6:0] with division value - The following MFIO configuration parameters are also required: Signal name Pad name MFIO mode spim1_d0_txd MFIO_MIPS_5 0 spim1_d1_rxd MFIO_MIPS_4 0 spim1_mclk MFIO_MIPS_3 0 spim1_d2 MFIO_MIPS_6 0 spim1_d3 MFIO_MIPS_7 0 spim1_cs0 MFIO_MIPS_0 0 spim1_cs1 MFIO_MIPS_1 0 MFIO_MIPS_58 1 spim1_cs2 MFIO_MIPS_2 0 MFIO_MIPS_55 2 MFIO_MIPS_31 1 spim1_cs3 MFIO_MIPS_56 2 spim1_cs4 MFIO_MIPS_57 2 BUG=chrome-os-partner:31438, chrome-os-partner:32441 TEST=Tested as bare-metal driver on Pistachio FPGA Change-Id: I3b3e4475976e6fba58cef93b12d997ec5cb26341 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 621849942e27f7d6cf2c8ade7f2c4d18d2318b91 Original-Change-Id: Ib257eb6236bd2895281175871b4ab979660f1239 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/217320 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9049 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-27urara: use proper SOC nameVadim Bendebury
Danube has become Pistachio, let's rename all instances where this SOC is mentioned. BUG=none TEST=board urara still builds Change-Id: Iea91419121eb6ab5665c2f9f95e82f461905268e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 58696cc7c77a70dca2bfd512d695d143e1097a78 Original-Change-Id: Ie5ede401c4f69ed5d832a9eabac008eeac6db62d Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/220401 Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-on: http://review.coreboot.org/9048 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23mips: fix bootblock stack definitionsVadim Bendebury
Bootblock stack on Danube should be SRAM and defined separately from the rest of the coreboot stack. The actual coreboot stack will be defined later. The top of the stack should be above the bottom, as the stack grows towards lower addresses. BUG=chrome-os-partner:31438 TEST=ran bootblock on simulator under codescape, observed stack properly initialized. Change-Id: I43d2bae5f85a09a95ca0103b253399bd92555aef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e02724cb4b30990ebaa631dabb45917af29d6437 Original-Change-Id: I3c37c8b5a1c0e7fd19411558a8f6d899fc283191 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/218732 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8767 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-03-23danube: Use the generic timer interfaceVadim Bendebury
Actual timer support is not yet available for Danube, it will be added soon. For now, just to make the target build, modify it to use GENERIC_UDELAY and HAVE_MONOTONIC_TIMER configuration option. BUG=none TEST=the target builds again Change-Id: Iad1ceb966d5dbc8687b966be4d2506c8f92eba5a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 261837539fb5a31f96e682edbcbbbc0e588f2750 Original-Change-Id: Ie3289eace9d2baadd01bd641b5dffc635ac80c0f Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/220395 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8765 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23danube: use SOC specific rom stage codeVadim Bendebury
Romstage initialization code does not need to be board specific, keep it in the SOC directory. Should there be a need for the board specific code, it can be added later. BUG=chrome-os-partner:31438 TEST=with upcoming patches, the urara board coreboot builds fine Change-Id: Ib619fa9313d463ded13e9259e50bb5aeaab4fb05 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c08977aaa5e9b5da29359d1920d7d8b61ce86d3 Original-Change-Id: I27e2d225bd36c42ccd29128d0ea9a970566c02af Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/215992 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8764 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-21danube: prepare SOC directory for uraraVadim Bendebury
These modules are necessary to resolve external names when building the board image. These are just skeletons for now which will be filled later. BUG=chrome-os-partner:31438 TEST=when config is enabled, emerge-urara coreboot succeeds. more extensive testing to come later Change-Id: I0fcb5d33187172ecac77041425402b33e89e8944 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94ec79b0ab872f5c5fe7db5bef5fdabf77d6b3b6 Original-Change-Id: I69cc178976a910ebf8031ed9ac9ad67b4cc0878a Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/215678 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8763 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-21imgtec/danube: Add support for ImgTec Danube SoCPaul Burton
Add build infrastructure and basic support code for the ImgTec Danube SoC. This support is sufficient to run on a simulator. BUG=chrome-os-partner:31438 TEST=none yet Change-Id: I59e36589765bf06b075fd4850215a0ef71246bb1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 881278d7fbb8e6803bc8f6f9e84c64640b097401 Original-Change-Id: Ia7ed7288b13085db7ff37b5ad75d978b6137f958 Original-Signed-off-by: Paul Burton <paul.burton@imgtec.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/207974 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8762 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 11:24:24 +0000