Age | Commit message (Collapse) | Author |
|
This avoids a lot of if (CONFIG(ELOG_GSMI)) boilerplate.
Change-Id: I87d25c820daedeb33b3b474a6632a89ea80b0867
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36647
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I64063bbae5b44f1f24566609a7f770c6d5f69fac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The x86 timers are a bit of a mess. Cases where different stages use
different counters and timestamps use different counters from udelays.
The original intention was to only flip TSC_CONSTANT_RATE Kconfig
to NOT_CONSTANT_TSC_RATE. The name would be incorrect though, those
counters do run with a constant rate but we just lack tsc_freq_mhz()
implementation for three platforms.
Note that for boards with UNKNOWN_TSC_RATE=y, each stage will have a
slow run of calibrate_tsc_with_pit(). This is easy enough to fix with
followup implementation of tsc_freq_mhz() for the platforms.
Implementations with LAPIC_MONOTONIC_TIMER typically will not have
tsc_freq_mhz() implemented and default to UNKNOWN_TSC_RATE. However,
as they don't use TSC for udelay() the slow calibrate_tsc_with_pit()
is avoided.
Because x86/tsc_delay.tsc was using two different guards and nb/via/vx900
claimed UDELAY_TSC, but pulled UDELAY_IO implementation, we also switch
that romstage to use UDELAY_TSC.
Change-Id: I1690cb80295d6b006b75ed69edea28899b674b68
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It is a user-visible option and enabled by default for ARCH_X86,
some consider it as debugging aid only. Therefore platform design
should not depend on it.
It must remain selected with CHROMEOS and boards are allowed
to explicitly select it as well.
For siemens/mc_bdx1,mc_aplX boot time will be increased due
the use of get_us_since_boot() with COLLECT_TIMESTAMPS=n.
When unable to determine if N seconds has elapsed from boot,
this turns into a delay of N seconds.
Change-Id: I6ee4195d266440143344781d39db9578cd8bdcb3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
We only need this defined with udelay() implementation
on top of LAPIC_MONOTONIC_TIMER.
Change-Id: I490245fa0d57de3a6e8609e735f668626cf1201e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36526
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a common cbmem_top implementation to all coreboot target.
In romstage a static variable will be used to cache the result of
cbmem_top_romstage.
In ramstage if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is set a global variable
needs to be populated by the stage entry with the value passed via the
calling arguments. if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is not set the
same implementation as will be used as in romstage.
Change-Id: Ie767542ee25483acc9a56785ce20a885e9a63098
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:143229128
Change-Id: I03aa12b16979dc07869b0d33daedcde4fe84bc27
Signed-off-by: Justin Frodsham <justin.frodsham@amd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36281
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a driver that can properly configure the pads needed to run the
correct audio mode. I2S requires the 48M oscillator enabled
regardless of an external connection.
Change-Id: I1137eae91aa28640ca3e9e2b2c58beed2cdb7e3c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I0c965e598e260ff8129aa07fb9fc5bf6e784e1d8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
An important piece of information contained in the APCB is a copy of
SPD-type data to use for soldered down memory. The amdfwtool has
been updated with the ability to build five APCBs into the PSP's BIOS
Directory Table. Modify Picasso's Kconfig and Makefile.inc to take
advantage of the flexibility, and pass the correct instance ID to
amdfwtool.
Change-Id: I0efa02cb35f187ca85a8f0d8bd574fc438e6dc0a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix a handful of errors that slipped through in 2e0f2788
"soc/amd/picasso: Update GPIO configuration".
Change-Id: I5784ab3cd95abc28fdc80a3815d0a52d955cff26
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36118
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Let the mainboard decide whether to let coreboot load the verb table.
Change-Id: I8f05ac02f690a43ada470916f5292b83aeaa8a4f
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35274
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the driver work with stepping=0.
Change-Id: Id0961369b9cc9cfe1b0c09ebc50e6966ccd2e919
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35273
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2a94c3b6282e9915fd2b8136b124740c8a7b774c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Clarify names as I2C2, etc. Use iomap.h defines for base addresses.
Update IRQs.
Change-Id: I3800592e4b0bcb681d0dcf24f69e269f845be025
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ieedc2062948a0d1563f82e4d0b1ca9c5bc3291a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33991
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a function to uart.c to ensure the right IOMux settings are
programmed for the console UART. Update Kconfig to reflect the
new addresses.
Give the user the ability to downclock the UARTs' refclock to
1.8342MHz.
Add the abiltiy to use an APU UART at a legacy I/O address.
Update the AOAC register configuration for the two additional
UARTs.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I74579674544f0edd2c0e6c4963270b442668e62f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Picasso's Device ID and default filename.
Only a single Device ID is documented for Picasso so remove the oprom
remapper function.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Iaf43d7c8da41beb05b58c494f0a6814f8f571b18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34422
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Picasso's SATA controller operates only in AHCI mode. Remove the
Kconfig symbols previously used to select between other possibilities.
Change-Id: Iaeb8b4a2540e976d2e7361faf8c6d261e60398fd
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
SATA is no longer defined in AOAC so remove its definitions.
Change-Id: Ief0ab6b5f69f2d17c11d8e2ee40941ac56c077f6
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Picasso's FCH has many similarities to Stoney Ridge, so few changes
are necessary. The most notable changes are:
* Update the index values for the C00/C01 interrupt routing
* FORCE_STPCLK_RETRY is not present
* PCIB is not defined
* FCH MISC Registers 0xfed80e00 numbering has changed
* C-state base moves from PM register to MSR
* Add option to determine the intended MUX settion for LPC vs. eMMC
* Remove the LEGACY_FREE option
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I69dfc4a875006639aa330385680d150331840e40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The standard PCI register space for D14F0 is accessible at 0xfed80000.
Add functions for use as helpers.
Change-Id: Icbf5bdc449322c3f5e59e6126d709cb2808591d5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The LPC-ISA bridge supports two ranges for SuperIO control registers.
Add a generic function to allow a mainboard to enable the appropriate
range. Provide #define values that are more descriptive than the
register's field names.
Change-Id: Ic5445cfc137604cb1bb3ee3ea4c3a4ebdb9a9cab
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35271
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change to the appropriate device IDs. Remove the ehci resource
call. Remove overcurrent settings, as this will be passed to
AGESA in later change.
Remove unused USB2 ACPI name assignment.
Change-Id: Ic287a05b30ca03e3371cc4a30aaa93b236c6d3fb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Kconfig options and Makefile command line options to generate
the amdfw.rom image. A new intermediate image is introduced, which
is the initial BIOS image the PSP places into DRAM prior to
releasing the x86 reset. The amd_biospsp.img is a compressed
version of the romstage.elf program pieces.
Additional details of the PSP items are not public information. See
NDA document PID #55758.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ib5e393e74ed60e968959012b6275686167a2d78a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic90dcff9d0b49a75a26556e4a1884a2954ef68f6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36063
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Devices behind LPC can expose more buses (e.g. I2C on a super-i/o).
So we should scan buses on LPC devices, too.
Change-Id: I0eb005e41b9168fffc344ee8e666d43b605a30ba
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29474
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
scan_usb_bus() and root_dev_scan_bus() had the very same implementation.
So rename the latter to scan_static_bus() and use that for both cases.
Change-Id: If0aba9c690b23e3716f2d47ff7a8c3e8f6d82679
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31901
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All solid state devices have vendor id defined by JEDEC specification JEP106,
which originally allocated only 7 bits for it plus parity. When number of
vendors exploded beyond 126, a banking proposition came maintaining
compatibility with older vendors while allowing for 4 extra bits (16 banks)
through the introduction of the concept "Continuation code", denoted by the
byte value of 0x7f.
Examples:
0xfe, 0x60, 0x18, 0x00, 0x00 => vendor 0xfe of bank o
0x7f, 0x7f, 0xfe, 0x60, 0x18 => vendor 0xfe of bank 2
BUG=b:141535133
TEST=Build and boot grunt.
Change-Id: I16c5df70b8ba65017d1a45c79e90a76d1f78550c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=None, code already tested with grunt.
Change-Id: I68008ce076d348adbdabf7b49cec8783dd7134b4
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=Build and boot grunt using new SPI code, with debug enabled. Check
output.
Change-Id: I639973d993316a10daa7564462e689b2c183f536
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Create a new SPI code that overrides flash operations and uses the SPI
controller within the FCH to its fullest.
Reference: Family 15h models 70h-7Fh BKDG revision 3.06 (public)
BUG=b:136595978
TEST=Build and boot grunt using this code, with debug enabled. Check
output.
Change-Id: Id293fb9b2da84c4206c7a1341b64e83fc0b8d71d
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Change-Id: I80c92f744fb9a6c3788b8b9ba779deef76e58943
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33530
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PCO_HDA0 device contains the "ATI" vendor ID 0x1002 and was
incorrectly added to this file. It isn't anticipated that the
device will need special handling, so remove it from the list
of supported IDs.
Change-Id: I306a806dc510e3a4ee3d9c0663306dc93b1d936d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Change-Id: I898188d31fcfd153eb95d0a7324fa9fd85316e3c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Replace the raw register definitions with device numbers and macros
for determining the register offsets. Rewrite the source to refer
to AOAC device numbers instead of a structure.
Remove the calculated offset for the console UART. Picasso's UARTs
are not contiguous so handle them separately.
Change-Id: Iffc87f39ebe38394a56d41bb0940e9701fd05db9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
This patch removes dedicated function call to make TSEG region cache
from soc and refers to postcar_enable_tseg_cache().
BUG=b:140008206
Change-Id: I18a032b43a2093c8ae86735c119d8dfee40570b1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Picasso's TimeStamp Counter is a new design and different than
Stoney Ridge. Although advertised as invariant, the ST TSC did
not become so until midway through POST making it an unreliable
source for measuring time. This is not the case for Picasso.
Remove the Stoney Ridge monotonic timer code and rely on the TSC.
Modify the calculation used in Family 15h of finding the number
of boost states first, and get the frequency directly out of the
Pstate0 register.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I909743483309279eb8c3bf68852d6082381f0dff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
It is already trivial to set D14F3x44 to 0, but add a function to wipe
both that and the settings in D14F3x48, along with x48's associated
addresses.
Change-Id: Ibec25562b2a1568681aea7caf86f00094c436a50
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: If33765b6dc4236c4b38860bfc4f2cef9b226b81d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: I3eae80a677e9d6932dc115523da2c0819a371fa7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35268
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: Ib0eea9bfd0c8d9e3eba257b561980accf5b4bab4
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35267
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows for minor optimization as num_timestamps becomes
a constant zero for a function with local scope. The loop
with calls to timestamp_add() gets removed from bootblock.
Change-Id: Id230075c0e76fe377b6ea8c8ddf8318e07d29b91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Start with moving all postcar_frame related function
declarations here from <arch/cpu.h>.
Change-Id: I9aeef07f9009e44cc08927c85fe1862edf5c70dc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34911
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These platforms use different signature for this function, so
declare them with different name to make room in global namespace.
Change-Id: I77be9099bf20e00ae6770e9ffe12301eda028819
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34909
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I62104894b5a956523f509d88d49e45a0bd1c587d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34749
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I02ad07e049cb74ccb52ba3d41eb16c58a2cfb38b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34748
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use a name consistent with the more recent soc/intel.
Change-Id: I4d67a7c3107758c81a67e1668875767beccfcdb0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Use a name consistent with the more recent soc/intel.
Change-Id: I491e609bed00dc79c628b321c74ad7f4cc31b5fe
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Make the prototypes match what drivers/amd/agesa would
rather see, in preparation to use the same code with
open-source AGESA.
Change-Id: I1506ee2f7ecf3cb6ec4cce37a030c05f78ec6d59
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some timeouts given were too small when serial console is enabled due to
its spinlock making code runtime worse with every AP present.
In addition we usually don't know how long specific code runs and how
long ago it was sent to the APs.
Remove the timeout argument from mp_run_on_all_cpus and instead wait up
to 1 second, to prevent possible crashing of secondary APs still
processing the old job.
Tested on Supermicro X11SSH-TF.
Change-Id: I456be647b159f7a2ea7d94986a24424e56dcc8c4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I909e9b5fead317928d3513a677cfab25e3c42f64
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34792
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At the moment we only have two splitting of TSEG,
one with and one without IED. They can all use
same implementation.
Make configuration problems of TSEG region assertion
failures.
Rename file from stage_cache.c to tseg_region.c to
reflect it's purpose.
Change-Id: I9daf0dec8fbaaa1f4e6004ea034869f43412d7d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34776
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Guckian
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9a4e57f8fd032f2824eab0e5b59d635710e3e24b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Any platform should need just one of these.
Change-Id: Ia0ff8eff152cbd3d82e8b372ec662d3737078d35
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34820
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is easier to track CAR_GLOBAL_MIGRATION which is
the approach to be deprecated with the next release.
This change enforces new policy; POSTCAR_STAGE=y is
not allowed together with CAR_GLOBAL_MIGRATION=y.
Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Almost all platforms force it on. Make it enabled by
default but under user control to optionally disable it.
Change-Id: I6b0f19c8bfd6ffed93023d57a1d28ca6acc06835
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change the stoneyridge definitions into picasso. The named 0 and 1
buses are controlled by the PSP and not directly accessible by host
firmware. I2C4 operates only in slave mode so is not added to to
the bus clear-after-reset sequence.
The I2C controller is fundamentally the same as on Stoney Ridge so
the ability to clear a potentially jammed bus is still required.
Program Picasso's new pad control registers in the MISC AcpiMmio
space according to the recommended settings.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ibbc5504ebc36654e28c79fe3ae17cc0d9255118f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change the Stoney Ridge ID to Picasso. Rename family 15h. Get the
number of cores/threads from CPUID as all D18 registers are new.
Change-Id: I44c45db637897f6caf320032c9f79a3a1ab4d6c9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Picasso has only a single 48M output. Simplify the setup function.
Note that while the feature is similar to older products, the register
definition and Enable bit has changed.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Iebaf5219fdcd3145a4faf906f656a7fbdc7e0c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove the Family 15h device. It's not in Family 17h documentation
and isn't detectable with HDT.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ifa9c06f78f39a3ec3b555d4ecc542172cd44a0b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33990
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I42bb0edb6fa2c6fa92829ef5d3623483aa448a5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33771
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Iae48a0c3fb2abf2aa3fb78af8d50431c8533f76f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33769
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the scratch register indicators. Per AMD, AGESA no longer
uses these. Use a new IO register to determine whether a warm
reset should occur.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I0ff7935004b3d1ac5204d3ef575cfa98116a57fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33989
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: If24bed8b3f10d945b9988445025409c8420dd07a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make the definitions match Picasso's definitions. Add/remove pins
that differ from stoneyridge, update GEVENTs for the FCH mapping.
Change-Id: I59f958151f27ed4ca0eb1a87ade6102eec1e5061
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Don't make assumptions about which subregion will
be accessed first.
Change-Id: I558fa4acc5068014b3748be6fc1bc34999054c0a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34775
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The callers don't necessarily check return value of
function. Make sure the parameters are not left
uninitialised in that case.
Change-Id: Ic02db2d35b2ec88506320e7df609940de4aef005
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34708
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Do this to avoid some amount of explicit typecasting
that would be required otherwise.
Change-Id: I5bc2c3c1dd579f7c6c3d3354c0691e4ba3c778e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This is declared weak so that platforms that do not
have smm_subregion() can provide their own implementation.
Change-Id: Ide815b45cbc21a295b8e58434644e82920e84e31
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add explicit CBMEM_STAGE_CACHE option. Rename
CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE.
Platforms with SMM_TSEG=y always need to implement
stage_cache_external_region(). It is allowed to return with a
region of size 0 to effectively disable the cache.
There are no provisions in Kconfig to degrade from
TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE.
As a security measure CBMEM_STAGE_CACHE default is changed to
disabled. AGESA platforms without TSEG will experience slower
S3 resume speed unless they explicitly select the option.
Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Iaf370e04adb04eb81555a57e81812ebe3339971d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I361fb0e02fd0bd92bb1e13fe84c898a1ac85aa40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34703
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No need to limit these declarations to FSP. Both
PARALLEL_MP_INIT smm_relocate() and TSEG_STAGE_CACHE
can be built on top of this.
Change-Id: I7b0b9b8c8bee03aabe251c50c47dc42f6596e169
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
* Increase log level from ERR to CRITICAL in run_ap_work().
* Print or return errors if mp_run_on_all_cpus() failed.
Tested on Supermicro X11SSH-TF.
Change-Id: I740505e3b6a46ebb3311d0e6b9669e7f929f9ab9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Stoney Ridge is family 15h models 70h-7Fh, Merlin Falcon is family 15h models
60h-6Fh. Add changes based on config parameter SOC_AMD_MERLINFALCON to make
the code backward compatible with Merlin Falcon.
BUG=none.
TEST=Tested later with padmelon board.
Change-Id: I00fe832324500bcb07fca292a0a55f7258a2d82f
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33624
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DIMM_SPD_SIZE is no longer used and should have been removed in
78025f6 "soc/amd/picasso: Remove all AGESA references".
Change-Id: Iae15998835e4d8afdb44cca77d2c9009b7e3947a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make the option match the change in I7c3b3ec.
"stoneyridge/Kconfig: Enable stage cache based on HAVE_ACPI_RESUME"
Change-Id: I7fa13428ec0119b61f429116a52986067e833bdf
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The decision to leave the alignment in stoneyridge was driven because
of a spec difference with picasso. AMD has checked the design
materials and has confirmed there was no change.
TEST=Build Grunt successfully
BUG=b:130343127
Change-Id: If3a1d5a41dc175c9733fd09ad28627962646daf9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch fixes inconsistent issue with stage cache enabling with
HAVE_ACPI_RESUME config enable. Only enable stage cache if
CONFIG_HAVE_ACPI_RESUME=y
Change-Id: I7c3b3ec4642a615e17fb3dbdedca6af8ca95ea2b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add config parameter for Merlin Falcon (SOC_AMD_MERLINFALCON) and modify
the Makefile.inc based on this config parameter.
BUG=none.
TEST=Tested later with padmelon board.
Change-Id: Id9f960b8f012c5a1cfd398611d6a51838493da27
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id56139a3d0840684b13179821a77bc8ae28e05ae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This is only a qualifier between TSEG and ASEG.
Change-Id: I8051df92d9014e3574f6e7d5b6f1d6677fe77c82
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
SMM_TSEG is a qualifier between TSEG and ASEG memory
region. ASEG is deprecated and not supported for
this platform in coreboot codebase.
The SMM lock should be set based on whether SMM is
installed or not, HAVE_SMI_HANDLER currently tells
that.
Change-Id: I9756f8a59ccfedd59d5b997b35313452dd0c4f46
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34127
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Family 17h will not use the Arch2008 (a.k.a. v5) wrapper. Remove
all source, support functions, and comments related to AGESA.
Family 17h requires v9 which has no similarities to v5 for
integration into a host firmware. AGESA v9 support will be added
via subsequent patches into the appropriate locations.
Change-Id: Iea1a41941a0ba364a6abaaf31cc8e1145db4a236
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
With VBOOT=y && VBOOT_MEASURED_BOOT=y message
digest will be allocated from the stack and
1 KiB reserve used with the recent platforms
was no longer sufficient.
The comment of LZMA scratchpad consuming stack
was obsolete for postcar, so these can be reduced
to same 4 KiB.
Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I02e6fdcd6685e0dd3fa7872b054ebe508157a0ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33758
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ib000e12cd568dd83b9533efe66e67878b806b3f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I02b279a2b625ecbdf827cb4643d772eb81ddfe70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Remove the mailbox call to notify the PSP that DRAM is ready. This
is not supported on Family 17h.
Remove the selectable SMU firmware. This is a feature of the PSP
bootloader and the standard bootloader doesn't contain the ability.
Clean up additional mentions of PSP within picasso.
Change-Id: I8abeb4c375dbff3b438cd18ccaaf66e11c86e72e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
The command line options for picasso will look different than
stoneyridge. Remove the fanned/fanless distinction to simplify
the makefile.
Picasso will use subprograms instead of fanned/fanless SKUs.
Change-Id: I50d8751e14b00ca53a6498f8e6c7f3f42543dace
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33753
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie9cf361ed0caba9c73727453c4a503557edc854d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I9d0098082c224bbf5ab2b4f0f41eb8b5b729eec7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Picasso doesn't implement the AcpiMmio XHCI_PM registers. Remove
source that uses these. Remove USB devices from the AOAC registers.
Remove the D0/D3 support from ASL, including all supporting xHCI
firmware loading support. Remove xHCI firmware from amdfw.rom.
Change-Id: Iae4c72c5a8e353ca8db02d04735f8d2b28441793
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Remove the hudson-style support for the Gigabit Ethernet Controller.
Change-Id: I2124b949a866148a97d9cd6e7fd418f7de8e2216
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Convert all remaining stoneyridge names to picasso.
Change-Id: I0ed3eaa5b1d2696448ae18b62c7218de59c61883
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Change-Id: I7031b07ae105a14be3c5d4e52ecc1364956fd845
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33750
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove all Picasso bootblock support. CAR is not a supportable
feature, and the first code executed at the reset vector will be
a hybrid romstage. Details for this implementation may be found
in Documentation/soc/amd/picasso/family17h.md.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I8edf45c02dc5bfcdca03abf1294db4be508682cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Update paths. There are still a few paths in Kconfig relating to PSP
and the firmware directory table. Those will be updated in a follow-on
commit.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I18f3d80dbeabd754ebcee6593864fd613fc2ef7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32412
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the Makefile is updated, we can change the name back without
it affecting the Stoney build.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I18ee48865fb64265f38179560265827783d50820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|