summaryrefslogtreecommitdiff
path: root/src/soc/amd/glinda
AgeCommit message (Collapse)Author
2023-10-20soc/amd/*: Set AMD_FW_AB_POSITION to either 64 or 128 bytesKarthikeyan Ramasubramanian
When CBFS verification is enabled, add amdfw_a/b.rom at offset 128 bytes to account for CBFS file header with hash attribute. When CBFS verification is disabled, add amdfw_a/b.rom at offset 64 bytes to account for CBFS file header without hash attribute. BUG=None TEST=Build Skyrim, Myst BIOS images with and without CBFS verification enabled. Change-Id: Ic374ac41df0c8fb8ce59488881ce5846e9058915 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-10-04soc/amd: rework SPL file override and SPL fusing handlingFelix Held
The SPL_TABLE_FILE and SPL_RW_AB_TABLE_FILE Kconfig options provide a way to override the default SPL file configured in the SoC's fw.cfg file by passing the '--spl-table' parameter to amdfwtool which will then use the override instead of the SPL file from the fw.cfg file. When SPL*_TABLE_FILE is an empty string, the corresponding add_opt_prefix call in the makefile will result in no '--spl-table' parameter being passed to amdfwtool, so it'll use the default SPL file from fw.cfg. In order to not pass an SPL override by default, remove the default from the SPL_TABLE_FILE in the SoC's Kconfig. The SoC default pointed to the same SPL file as in fw.cfg file anyway. Now only when a mainboard sets this option to point to a file, that file will be used as an override. This override is used to include a special SPL file needed for the verstage on PSP case on the Chromebooks. Since SPL_TABLE_FILE is an empty string by default, neither the SPL_TABLE_FILE Kconfig option nor it being evaluated in the Makefile need to be guarded by HAVE_SPL_FILE, so remove the dependency in the Kconfig and the ifeq in the Makefile. Before this patch, the HAVE_SPL_FILE option controlled two things that shouldn't be controlled by the same Kconfig option: Only when HAVE_SPL_FILE was set to y, the SPL_TABLE_FILE override was taken into account, and it also controls if spl_fuse.c got added to the build which when added will send the SPL fusing command to the PSP. So the case of needing an SPL file override, but not updating the SPL fuses wasn't supported before. The SPL file in the amdfw part will be used by the PSP bootloader for the anti-rollback feature which makes sure that the SPL file version isn't lower than what is in the SPL fuses. For this the SPL file needs to be present in the PSP directory table. The SPL version check happens way before we're running code on the x86 cores. The SPL fusing PSP command that can be sent by coreboot will tell the PSP to update the SPL fuses so that the fused minimal SPL version will be updated to the current SPL version. Since the former HAVE_SPL_FILE option now only controls if the SPL fusing command will be sent to the PSP mailbox, rename it to PERFORM_SPL_FUSING to clarify what this will do and update the help text correctly describe what this does. TEST=With INCLUDE_CONFIG_FILE set to n, timeless builds for both Birman with Phoenix APU and Skyrim result in identical binaries. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6cec1f1b285fe48e81a961414fbc9978fa1003cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/78178 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-21soc/amd/*/cpu: factor out common noncar mp_init_cpusFelix Held
Since all non-CAR AMD SoCs have the same mp_init_cpus implementation, factor it out and move it to a common location. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibf4fa667106769989c916d941addb1cba38b7f13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-09-18soc/amd: introduce SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGIONFelix Held
Add a separate Kconfig option for adding np_region.c to the build. Only the code for Picasso, Cezanne, Mendocino, Phoenix and Glinda call data_fabric_set_mmio_np which is implemented in that file, so only select the new SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION Kconfig option for those. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic49ce039462b52e2c593c7d2fef43efc50901905 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77987 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-12soc/amd/*/Makefile: drop wrong EFS diagramsFelix Held
The EFS data structure diagrams in the Makefiles of Picasso and newer SoCs were wrong, since the BIOS directory table pointer is in a different location than shown in the diagram. Since the diagram also wasn't that easy to understand and amdfwtool does all of that handling, drop the wrong diagram from the Makefiles. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5f86fea29f956ff10746d35dbe967a4a89e11cca Reviewed-on: https://review.coreboot.org/c/coreboot/+/77799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2023-09-06soc/amd: correctly report I2C controller state in ACPIFelix Held
Instead of reporting all I2C controllers in the system as enabled in the corresponding ACPI device's _STA method, report the I2C devices that are disabled in the devicetree as disabled in the corresponding _STA method too. This is done by returning the contents of the STAT variable inside each device's scope in the DSDT that have a default value of 0 (device not present/disabled). For all enabled and hidden I2C devices i2c_acpi_fill_ssdt gets called which then writes 0xf (device enabled and visible) or 0xb (device enabled, but hidden) to the STAT name inside the same scope, but in the SSDT. This object in the SSDT will then override the default in the DSDT resulting in the _STA method returning the correct status of each device. The code was inspired by commit 7cf9c7451808 ("soc/amd/*: Fix UART ACPI device status"). TEST=On Mandolin all I2C controllers are disabled and with this patch none shows up in the Windows 10 device manager. When enabling an I2C controller in the devicetree for testing, it shows up again in the Windows device manager. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4cd9f447ded3a7f0b092218410c89767ec517417 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2023-09-01util/amdfwtool: Deal with psp position in flash offset directlyZheng Bao
It is based on work by Arthur Heymans, 69852. Get rid of the confusing "position index" and use the relative flash offset as the Kconfig setting instead. TEST=binary identical on amd/birman amd/majolica amd/gardenia amd/mayan amd/bilby amd/mandolin amd/chausie amd/pademelon pcengines/apu2 google/skyrim google/guybrush google/zork google/kahlee google/myst (The test should be done with INCLUDE_CONFIG_FILE=n) Change-Id: I26bde0b7c70efe9f5762109f431329ea7f95b7f2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-08-26soc/amd: Move psp_transfer.h out of each SOC into commonMartin Roth
The psp_transfer.h file was the same under all SoCs, and is really tied to the file common/vboot/transfer.c, not the SOC. This patch makes an include directory under vboot to put the header into and sets it to be included for all SoCs using SOC_AMD_COMMON. This makes the header file available to all platforms, so that new chips that don't use the psp_verstage don't have to make a psp_transfer.h file just to satisfy the compiler. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5b9f2adee3a1d4d8d32813ec0a850344b7d717b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77303 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-15soc/amd/*/root_complex: introduce get_iohc_fabric_idFelix Held
Implement get_iohc_fabric_id for each SoC that translates the coreboot domain number to the fabric ID of the corresponding PCI root. This allows the primary domain to have the number 0 even though the destination data fabric ID will be non-zero. Keeping the primary domain number 0 allows to use config_of_soc() which can be resolved at link time and not need to dynamically find the SoC device to get the config. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6538a777619eed974b449fc70d3fe3084ba447dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/77168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-08-12soc/amd/common/data_fabric: read PCI bus decoding from DF registersFelix Held
The data fabric also controls which PCI bus numbers get decoded to the PCI root. In order for the resource allocator to know how the hardware is configured, read the corresponding data fabric registers to get the information that then gets passed to the allocator. Picasso, Cezanne, Mendocino and Rembrandt only support one PCI segment with 256 buses while the Phoenix and Glinda data fabric hardware has support for more PCI segments. Due to this change, the register layout is different and incompatible between those two, so introduce the SOC_AMD_COMMON_BLOCK_DATA_FABRIC_MULTI_PCI_SEGMENT Kconfig option for a SoC to specify which implementation is needed. At the moment, coreboot doesn't have support for multiple PCI segments and the code doesn't support PCI segments other than segment 0. On Picasso the PCI bus number limit read back from the data fabric register is 255 even though CONFIG_ECAM_MMCONF_BUS_NUMBER is set to 64, so also make sure that the bus and limit returned by data_fabric_get_pci_bus_numbers is within the expected limits. TEST=PCI bus allocation still works on Mandolin (Picasso) and Birman (Phoenix). Picasso has 64 PCI buses. coreboot puts this info into the resource producer in _SB\PCI0\_CRS which the Linux kernel reads: * coreboot: PCI0 _CRS: adding busses [0-3f] * Linux: pci_bus 0000:00: root bus resource [bus 00-3f] This matches the information in the ACPI MCFG table. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ide5fa9b3e95cfd59232048910cc8feacb6dbdb94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77080 Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-11soc/amd/glinda/Kconfig: fix commentFelix Held
The SOC_AMD_REMBRANDT_BASE comment at the end of Glinda's Kconfig is probably a leftover from the Mendocino/Rembrandt SoC this file was copied from. Change it to SOC_AMD_GLINDA to match the corresponding 'if SOC_AMD_GLINDA' in the file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I85132e4840c1bc713cfc2f3493f800d66edd10ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/77121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2023-08-09treewide: Get rid of "NO_DDRx" selectionElyes Haouas
Change-Id: I8fa26e7a398eee855c31a76f0f89b4111368c2a6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-09soc/amd/glinda/include/data_fabric: add DF PCI config map registerFelix Held
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie54fd6c5a82f368018d0b5fb811a6c9220c2c70b Reviewed-on: https://review.coreboot.org/c/coreboot/+/77079 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-09soc/amd/*: Fix UART ACPI device statusMatt DeVillier
Prior to commit d1c0f958d198 ("acpi: Call acpi_fill_ssdt() only for enabled devices"), uart_inject_ssdt() was used to set the ACPI status (_STA) for both enabled and disabled devices. The aforementioned commit limited it to being called only on enabled devices, which left disabled devices without any _STA method at all -- which the OS assumes means that the device is present and enabled. To fix this, create the _STA method in the UART asl code for each port, and set the return value to a name variable (STAT) which defaults to 0 (not present/disabled). Then, have uart_inject_ssdt() set STAT to present and enabled (0xF) for UARTs actually present on the board. TEST=build/boot google/skyrim (frostflow), dump ACPI tables, and verify that _STA returns 0xF only for UARTs enabled in devicetree. Change-Id: Id89e74c3ea7f53280935898ee35311b7cf3b152a Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77092 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-08soc/amd/glinda/include/data_fabric: add data fabric IO decode registersFelix Held
PPRs #57254 Rev 1.52 and #57255 Rev 0.33 were used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia58e26caa1ba910b41911991b176a1ac8c4e0065 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-08soc/amd/*/include/data_fabric: add dst_ prefix to fabric_id fieldFelix Held
Rename the fabric_id struct field in the df_mmio_control union to dst_fabric_id to both better match the register definitions and also be a bit clearer about what this is doing. Also use tabs for indentation in the struct inside the df_mmio_control union. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0a17d82a5d7b66a8f84854f21fbbb319da81ac43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-08-08soc/amd/*/include/data_fabric: reorder register definitionsFelix Held
Order the data fabric register definitions by function number and register offset. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia3066ad0f564520cb322a3e41a413eb3bf51260d Reviewed-on: https://review.coreboot.org/c/coreboot/+/76923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-08soc/amd/*/include/data_fabric: rename D18F0_MMIO_* to DF_MMIO_*Felix Held
Now that the data fabric PCI device functions are included in the register definitions, the remaining data fabric device function numbers can be dropped from the define names. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia0355838ac1d513ba562fd6fb4672342dd383498 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76888 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-08soc/amd/common/include/data_fabric_defs: introduce & use DF_REG_* macrosFelix Held
To have both the PCI function number and the register offset into the config space of that function of the data fabric device in the data fabric register definitions, introduce and use the DF_REG_ID, DF_REG_FN and DF_REG_REG macros. The DF_REG_ID macro is used for register definitions where both the function number and the register offset are specified, and the DF_REG_FN and DF_REG_REG macros are used to extract the function number and the register offset from the register defines. This will allow having one define for accessing an indexed group of registers that are on different functions of the data fabric device. TEST=MMIO resources read from the data fabric's MMIO decode registers don't change on Mandolin and the ACPI CRAT table is also identical. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I63a284b26081c170a217b082b100c482f6158e7e Reviewed-on: https://review.coreboot.org/c/coreboot/+/76886 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-05src/*/post_code.h: Change post code prefix to POSTCODEYuchen He
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. header="src/soc/amd/common/block/include/amdblocks/post_codes.h \ src/include/cpu/intel/post_codes.h \ src/soc/intel/common/block/include/intelblocks/post_codes.h" array=`grep -r "#define POST_" $header | \ tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2` for str in $array; do splitstr=`echo $str | cut -d '_' -f2-` grep -r $str src | cut -d ':' -f 1 | \ xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g" done Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad Signed-off-by: Yuchen He <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-07-27soc/amd/common/fsp: factor out read_fsp_resources from root_complex.cFelix Held
Factor out the common FSP-specific code to report the usable and reserved memory resources read from the HOBs that FSP has put into memory. This both reduces code duplication and also moves FSP-specific code out of the SoC code into the FSP-specific common AMD SoC code folder. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib373c52030209235559c9cd383f48ee1b3f8f79b Reviewed-on: https://review.coreboot.org/c/coreboot/+/76759 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-07-25soc/amd/*/root_complex: introduce and use SMN_IOHC_MISC_BASE_13B1Felix Held
On the mobile SoCs, SMN_IOHC_MISC_BASE_13B1 is the only IOHC misc base address, but on for example Genoa it's the address of the IOHC misc base of the second IOHC. Due to it not being the first one on Genoa, use 13B1 as part of the name instead of using an index of 0 which would look odd in the Genoa case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1db28ec03a3ba1c2040d8a1500ae17aa9705f6e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76756 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-07-25soc/amd/*/root_complex: don't report root complex IOAPIC resource twiceFelix Held
Since the per PCI root IOAPIC is now reported as domain MMIO resource and the IVRS code now again probes for the IOAPIC resource on the domain device, the IOAPIC resource doesn't need to be reported as resource of the northbridge PCI device any more. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8604bd321ec4239076b1be99dca095e47f8b75a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76600 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-25soc/amd/glinda/root_complex: add non-PCI MMIO registersFelix Held
Add the SoC-specific non-PCI MMIO register list. PPR #57254 Rev 1.52 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I29b4ef947776ab8a6c215c1a5204769a9f61e6fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/76598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-24soc/amd/*/Makefile.inc: Do not add APOB NV entry when disabledFred Reitberger
Do not add type 0x63 entry to amdfw.rom when APOB_NV cache is disabled. BUG=b:290763369 TEST=boot birman multiple times with/without APOB_NV cache enabled Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Iefe6f56d7dbedd289680f25a5f372eaa12e967b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76568 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/amd/*/root_complex.c: Use newer function for resource declarationsArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: If2048c9cade731b2e4464d0670e0578f5f4bcea0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-07-17soc/amd/glinda/early_fch: don't call enable_acpimmio_decode_pm04Felix Held
The enable_acpimmio_decode_pm04 function uses the IO port based indirect access of the PM register space. The PM_INDEX and PM_DATA registers don't exist any more on Glinda, so the code shouldn't access those. Since the PM_04_ACPIMMIO_DECODE_EN bit in the ACPIMMIO_DECODE_REGISTER_04 register is 1 after reset, the ACPIMMIO space is still accessible. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic6bc0479ea4ea2b9fe3629a6e15940b31b2864d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-07-07soc/amd/*/globalnvs,nvs: remove deprecated & unused CBMC field from GNVSFelix Held
Commit cde4f3b2790d ("acpi/gnvs.c: Drop unused pointer to the cbmem console") removed writing the coreboot memory console pointer to the GNVS and kept the CBMC field as reserved. Since those fields aren't needed any more and there are no dependencies on the absolute position of the different fields in GNVS as long as both GNVS definitions on the C and the ASL side match, remove the deprecated and unused CBMC field from the GNVS structs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iadfaf5a4ec1401b027dbfb6a7c6ce74a1dcecdfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/76351 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-07-07soc/amd/*/Makefile.inc: Use _tohex instead of printfFred Reitberger
Use the _tohex function to convert values to hex instead of 'shell printf' TEST=timeless builds identical for grunt,dalboz,guybrush,chausie,birman Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ic7f7d1b764479088cc0980b208d8d603bc712832 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76314 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-07-06acpi/gnvs.c: Drop unused pointer to the cbmem consoleArthur Heymans
Change-Id: I7e2018dbccead15fcd84e34df8207120d3a0c57c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64303 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
2023-07-03soc/amd/*: Utilize get_fmap_value() Makefile function where possibleMatt DeVillier
Replace: $(shell awk '$$2 == "xyz" {print $$3}' $(obj)/fmap_config.h) with: $(call get_fmap_value,xyz) to improve code readability/maintainability. Change-Id: If6859108c7d5611a63fc38909dc75195bfb1d59a Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76168 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-06-23commonlib/console/post_code.h: Change post code prefix to POSTCODElilacious
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \ src/commonlib/include/commonlib/console/post_codes.h; myArray=`grep -e "^#define POSTCODE_" \ src/commonlib/include/commonlib/console/post_codes.h | \ grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`; for str in ${myArray[@]}; do splitstr=`echo $str | cut -d '_' -f2-` grep -r POST_$splitstr src | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; grep -r "POST_$splitstr" util/cbfstool | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; done Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-19soc/amd/*: Use proper resource function to declare GNB IOAPICsArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I296697d579b9ad8e35b22ada939a74a5ef6d6f61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75828 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-15soc/amd/*/root_complex: reserve IOMMU MMIO areaFelix Held
This makes sure that the resource allocator won't use this address range for anything else. In the systems I looked at, this was between the end of the above 4GB memory and the beginning of the above 4GB PCI BAR MMIO region, but better reserve it here so nothing else will get allocated there if this expectation isn't met. TEST=Reserved region is printed in the console logs: update_constraints: PCI: 00:00.0 09 base fd00000000 limit fdffffffff mem (fixed) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5a8150873cb019ca1d903ed269e18d6f9fabb871 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-14soc/amd/acpi/ivrs: Use specific IOMMU resource index on all SOCArthur Heymans
By adding all DXIO IOAPIC with the same resource index, the IVRS code can always pick that resource which simplifies the code. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I10345e2337dcb709c2c1a8e57a1b7dd9c04adb9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
2023-06-09soc/amd: add ops xhci_pci_ops to XHCI controllers in devicetreeFelix Held
Instead of adding the new PCI IDs of the XHCI controllers in every new chip generation to the pci_xhci driver, bind the driver to the internal PCI devices of the XHCI controllers via the device ops statement in the chipset devicetree. The PCI device function of the XHCI2 controller in Mendocino can be either a dummy device or the XHCI controller, so the device ops are attached to that device in the mainboard devicetree instead. The Glinda code is right now just a copy of the Mendocino code, so it'll change in the future, but for consistency the equivalent changes to those in Mendocino are applied there too. Since the device ops are now attached to the devices via the static devicetree entry, also remove both the xhci_pci_driver struct and the amd_pci_device_ids array from drivers/usb/pci_xhci/pci_xhci.c. TEST=SSDT entries for the XHCI controllers are still generated on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9c455002c6d2aac576fe24eee0c31744b4507bb0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-07soc/amd/*/root_complex: use VGA_MMIO_* definesFelix Held
Replace the magic constants by using defines. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I16179a37b6ee19bc3b4862b7dcb3bbc4caf63f2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-06-07soc/amd/glinda/acpi: use ROOT_BRIDGE macroFelix Held
Use the ROOT_BRIDGE macro in soc.asl to replace the pci0.asl file. The soc/amd/common/acpi/lpc.asl file which was included in the now removed pci0.asl file now gets included in the correct scope in the soc.asl file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I373c171f7f4754391012b41d44965561ced4f0b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75595 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-07soc/amd/glinda/chip: use common data fabric domain resource codeFelix Held
Use the new common AMD code that gets the usable non-fixed MMIO windows from the data fabric MMIO decode registers and generate the PCI0 _CRS ACPI code based on those regions. For a more detailed description see the corresponding patch that changes the Picasso code to use this new code. In contrast to the Picasso code, this change will drop the unneeded _STA method inside the PCI0 scope which wasn't present in Picasso's ACPI code before it got replaced by the SSDT that gets generated by amd_pci_domain_fill_ssdt. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I948d882b2e2c6d19f73c0be094e4ff6e42ec81d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75560 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-06soc/amd/*/root_complex: reserve PCI config IO portsFelix Held
This makes sure that the resource allocator won't use those ports for anything else. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie42260902ee2b383dd5867ac813cae029f706f2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/75556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-06-02soc/amd/common/block/cpu: Refactor ucode allocationGrzegorz Bernacki
Move microcode load/unload to pre_mp_init and post_mp_init callbacks. It allows to make sure that ucode is freed only if all APs updated microcode. BUG=b:278264488 TEST=Build and run with additional debug prints added to confirm that data are correctly unmapped Change-Id: I200d24df6157cc6d06bade34809faefea9f0090a Signed-off-by: Grzegorz Bernacki <bernacki@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-05-13soc/amd/*/acpi/mmio.asl,sb_fch.asl: hide MISC deviceFelix Held
Don't set bit 2 of the return value of the _STA method in order for Windows not to show a warning about an unknown device in the device manager for this device. TEST=The unknown device with device instance path ACPI\AMD0040\3 disappeared from the device manager in Windows 10 build 19045 on a Mandolin board with a Picasso APU. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If005f06843956004c281fd70cf364171148cb9ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/68962 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-13soc/amd/*/acpi/mmio.asl,sb_fch.asl: change AAHB's _STA back to methodFelix Held
Commit 396fb3db74db ("soc/amd/*/acpi/mmio.asl,sb_fch.asl: hide AAHB device") didn't only change the visibility of the device, but also changed the _STA method to a name. While this worked, the specification says that _STA is supposed to be a method, so change it back to being a method. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id0932b2875aaf563a4dbd860bdd11a04272e3780 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75169 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-08soc/amd/*/acpi/northbridge,pci0: don't hide PCI0 root device from OSFelix Held
Return 0xf from PCI0 _STA method so that bit 2 is set which indicates that the device should be shown in the user interface. This ports commit c259d7192806 ("soc/amd/stoney/acpi: Unhide PCI0 root device from OS") forward from Stoneyridge to the newer AMD SoCs. TEST=On Mandolin the PCI Express Root Complex now shows up in the device manager on Windows 10 and when switching the view to 'devices by connection', all PCI(e) devices are shown below it. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4155556dc5df8f163fe06aa6719fadbb2684cc19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74949 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-29sb,soc/amd,intel: Drop include <cpu/x86/smm.h>Kyösti Mälkki
I forgot to remove these in commit 0fe36db154eb ("ACPI: Make FADT entries for SMI architectural"). Change-Id: Ib1bc1dad6053ddb0454d4510917fd2bcf0901f35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74811 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-29ACPI: Make FADT entries for RTC/CMOS architecturalKyösti Mälkki
For AMD, replace name RTC_ALT_CENTURY with RTC_CLK_ALTCENTURY that points to same offset. Since the century field inside RTC falls within the NVRAM space, and could interfere with OPTION_TABLE, it is now guarded with config USE_PC_CMOS_ALTCENTURY. There were no reference for the use of offset 0x48 for century. Change-Id: I965a83dc8daaa02ad0935bdde5ca50110adb014a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74601 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-27ACPI: Make FADT entries for SMI architecturalKyösti Mälkki
Change-Id: I80aa71b813ab8e50801a66556d45ff66804ad349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74600 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-27soc/amd: Drop acpi_fill_madt_irqoverride()Kyösti Mälkki
It is unused. The use of field irq is problematic as it should appear relative to IOAPIC GSI bases in the devicetree. Change-Id: I460fd5fde3a7fba5518ccfc153a266d097a95a39 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-26soc/amd: Use ACPI_COMMON_MADT_IOAPICKyösti Mälkki
Change IRQ #0 to GSI #2 override to positive edge trigger from the bus ISA default (positive edge). Change-Id: I2de941071fca6f7208646a065a271fbf47ac2696 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74354 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-26arch/x86/ioapic: Promote ioapic_get_sci_pin()Kyösti Mälkki
Platform needs to implement this to provide information about SCI IRQ pin and polarity, to be used for filling in ACPI FADT and MADT entries. Change-Id: Icea7e9ca4abf3997c01617d2f78f25036d85a52f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-22soc/amd/glinda: drop code for non-existing eMMC controllerFelix Held
Glinda doesn't have an eMMC controller and also doesn't have GPIO pins that eMMC signals can be multiplexed on, so drop the eMMC related code from Glinda. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I49ead01075780ea97dae99a36632f7659fd00587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74662 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-22soc/amd/*/include/pci_devs: fix copy-paste error in PCIE_ABC_C_DEVFNFelix Held
Since it's an internal bus, it's PCIE_ABC_C_DEVFN and not PCIE_GPP_C_DEVFN. This also makes it consistent with the rest of the internal PCI buses. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ica8b666161c3cd3b0b4a29f8a4b0aff473b4d833 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-21ACPI: Obsolete FADT p_lvl2_lat and p_lvl3_lat fieldsKyösti Mälkki
After the obsoletion of Processor() it is necessary to provide _CST package to define P_LVLx IO addresses for C2/C3 transitions. The latency values from _CST will always replace those in FADT. Change-Id: I3230be719659fe9cdf9ed6ae73bc91b05093ab97 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-15sb,soc/amd,intel: Add and use ACPI_COMMON_MADT_LAPICKyösti Mälkki
Boards with SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID have special handling for the time being. Change of aopen/dxplplusu is coupled with sb/intel/i82801dx. Change of emulation/qemu-i440fx is coupled with intel/i82371eb. For asus/p2b, this adds MADT LAPIC entries, even though platform has ACPI_NO_MADT selected. Even previously ACPI_NO_MADT creates the MADT, including an entry for LAPIC address. Change-Id: I1f8d7ee9891553742d73a92b55a87c04fa95a132 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-04soc/amd/*/Makefile: use all_x86 targetFelix Held
Use the newly introduced 'all_x86' make target to add the compilation unit to all stages that run on the x86 cores, but not to verstage on PSP. TEST=Timeless builds for Mandolin without verstage on PSP and Guybrush with verstage on PSP result in identical images with and without this patch applied. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I94de6de5a4c7723065a4eb1b7149f9933ef134a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74151 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-03soc/amd/cezanne,glinda,mendocino,phoenix,picasso/Kconfig: use all targetFelix Held
The i2c.c compilation unit is added to all stages in all cases, so use the all target instead of adding it to all stages separately. Also order the all targets alphabetically. TEST=Timeless build on Mandolin results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie90380075a3c87d226cdcb0f41f7e94275eaaa42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-29soc/amd/common/block/cpu/Kconfig: drop FAM17H_19H suffix from TSC optionFelix Held
The SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option is valid for all SoCs with Zen-based CPU cores including the family 1Ah, so remove the suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I58d29e69a44b7b97fa5cfeb0e461531b926f7480 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-03-29soc/amd/common/block/cpu/tsc/tsc_freq: use get_pstate_core_freqFelix Held
Use get_pstate_core_freq instead of open-coding the calculations in tsc_freq_mhz. In the case of the CPU frequency divider being 0, get_pstate_core_freq will return 0; in this case that shouldn't happen, TSC_DEFAULT_FREQ_MHZ will be used as frequency, since for the TSC frequency it's better to err on the end of the expected frequency being too high which will cause longer than expected delays instead of too short delays. Now that the code is using get_pstate_core_freq, this code is valid for Glinda too, so also remove the comment on the SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option being selected in the Glinda Kconfig. This Kconfig option will be renamed in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I01168834d4018c92f44782eda0c65b1aa392030d Reviewed-on: https://review.coreboot.org/c/coreboot/+/74013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-03-29soc/amd/common/cpu/tsc: factor out family-specific get_pstate_core_freqFelix Held
Factor out the get_pstate_core_freq function from the SoC's acpi.c files to both avoid duplication and to also be able to use the same function in the TSC frequency calculation in a follow-up patch. The family 17h and 19h SoCs use the same frequency encoding in the P state MSRs while the family 1Ah SoCs use a different encoding. The family 15h and 16h SoCs use another encoding, but since this isn't implemented in Stoneyridge's acpi.c, this will be added in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8619822c2c61e06ae5db86896d5323c9b105b25b Reviewed-on: https://review.coreboot.org/c/coreboot/+/74010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-03-27soc/amd: factor out common get_pstate_core_power implementationFelix Held
Now that all get_pstate_core_power implementations in each SoC's acpi.c file is identical, factor it out into a common implementation. This implementation will also work for Stoneyridge which isn't using the common P state code yet. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iba3833024a5e3ca5a47ffb1c1afdbfd884313c96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73997 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-27soc/amd: introduce and use get_pstate_core_uvolts for SVI2 and SVI3Felix Held
Since SVI3 has the CPU voltage ID split into two parts, a serial voltage ID version specific function is needed to get the raw core VID value. This will allow making get_pstate_core_power common for all AMD CPUs in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I71ca88c38b307558905a26cce8be1e8ffc5fbed4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73996 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-27soc/amd: introduce and use get_uvolts_from_vid for SVI2 and SVI3Felix Held
Instead of implementing the conversion from the raw serial voltage ID value to the voltage in microvolts in every SoC, introduce the SOC_AMD_COMMON_BLOCK_SVI[2,3] Kconfig options for the SoC to select the correct version, implement get_uvolts_from_vid for both cases and only include the selected implementation in the build. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I344641217e6e4654fd281d434b88e346e0482f57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73995 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-24soc/amd/*/include/msr: add version number to SERIAL_VID_* define namesFelix Held
Picasso and Cezanne use the serial voltage ID 2 standard to communicate the CPU voltage to the voltage regulator module on the mainboard, while Mendocino, Phoenix and Glinda use the serial voltage ID 3 standard for this. Both standards encode the voltage in a different way, so add the serial VID version number to the defines to clarify for which version the define is. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8ddab8df27c86dc2c70a6dfb47908d9405d86240 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73994 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-03-24soc/amd/*/include/msr: drop _LO part from PSTATE definition namesFelix Held
The _LO part in the definition names is a leftover from before moving to the pstate_msr union access to the bitfield elements where it still mattered if a bit was in the lower of higher half of the MSR. With the mask-and-shift access to the two parts of the MSR being gone, the _LO part in the name isn't useful any more and possibly a bit misleading, so drop that part. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib43c71e946388c944ecf40659d4c12ca02a27a5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73927 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-24soc/amd: pass pstate_msr union to get_pstate_core_[freq,power]Felix Held
Since we already have and use the pstate_msr union in get_pstate_info, also pass it directly to the get_pstate_core_freq and get_pstate_core_power function calls avoids having to sort-of convert the msr_t type parameter in the implementations of those two functions. In amdblocks/cpu.h a forward declaration of the pstate_msr union is used since soc/msr.h doesn't exist in the two pre-Zen SoCs that also include amdblocks/cpu.h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I112030a15211587ccdc949807d1a1d552fe662b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73926 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-23soc/amd/glinda: introduce and use pstate_msr bitfield structFelix Held
Add the pstate_msr union of a bitfield struct and a raw uint64_t to allow easier access of the bitfields of the P state MSRs which will be implemented in a following patch. PPR #57254 Rev 1.52 was used as a reference. This patch adds and uses the cpu_vid_8 bit which is the 9th bit of the voltage ID specified in the SVI3 spec. The way the CPU frequency is encoded in the PSTATE MSR has changed compared to Phoenix, so also update the comment in the SoC's Kconfig file that the selected SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H is likely incompatible which will be addressed in the future. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3d1878ce4d9bc62ac597e6f71ef9630491628698 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-22soc/amd/*/acpi: assign proper boolean values in get_pstate_core_freqFelix Held
Assign true/false instead of 1/0 to the valid_freq_divisor bool variable in get_pstate_core_freq. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I92d0eb029c55f80a2027ff6d404c63ed84282750 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-15soc/amd: Print amdfwtool debug info if V=1Martin Roth
When doing coreboot builds, we can set V=1 to see all of the make info printed as the compile is happening. Use this flag to set the debug flag for amdfwtool so it doesn't have to be enabled separately. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5b05cbc9f9b540a174db479822af657cf35733de Reviewed-on: https://review.coreboot.org/c/coreboot/+/73658 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-03-10amdfwtool: Add HW IPCFG file whose subprog is 1Zheng Bao
And rename PSP_HW_IPCFG_FILE to PSP_HW_IPCFG_FILE_SUB0 Change-Id: Ia1ab8482074105de367905be2b4b0418066823d2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-08soc/amd: factor out ACPI_SSDT_PSD_INDEPENDENT to common AMD ACPI KconfigFelix Held
Now that the code using the ACPI_SSDT_PSD_INDEPENDENT Kconfig symbol is moved to soc/amd/common/block/acpi/cpu_power_state.c, also move the Kconfig symbol to the Kconfig file in this directory. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ide18111df38d4e9c81f7d183f49107f382385d85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-08soc/amd/include/msr: factor out P state MSR enable bit to cpu/amd/msr.hFelix Held
The bit position of the P state enable bit in the 8 P state MSRs is identical for all AMD chips including the family 16h model 30h APU that lives outside of soc/amd. The other bits in those 8 MSRs are more or less family- and model-specific. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia69c33e28e2a91ff9a9bfe95859c1fd454921b77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-08soc/amd/*/acpi: factor out common get_pstate_info implementationFelix Held
The implementations of get_pstate_info of Picasso, Cezanne, Mendocino, Phoenix and Glinda are identical, so factor it out and move it to the common AMD SoC code. The SoC-specific get_pstate_core_freq and get_pstate_core_power functions remain in the SoC-specific code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibe0494f1747f381a75b3dd71a8cc38fdc6dce042 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-08soc/amd/*/acpi: factor out common generate_cpu_entries implementationFelix Held
With the exception of the generate_cppc_entries call, the implementations of generate_cpu_entries of Picasso, Cezanne, Mendocino, Phoenix and Glinda are identical, so factor it out and move it to the common AMD SoC code. Since all SoCs that support CPPC already select the SOC_AMD_COMMON_BLOCK_ACPI_CPPC Kconfig option, this can be used to only call generate_cppc_entries for platforms where it is available. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I71323d9d071b6f9d82852479b60dc56c24f2b9ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/73504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-08soc/amd/glinda/acpi: rework C state info table handlingFelix Held
Rework the way the C state info is generated before it gets passed to acpigen_write_CST_package in generate_cpu_entries by separating the data from the code. For this, the newly introduced common get_cstate_info function is used. Separating the data from the code will eventually allow moving generate_cpu_entries to the common AMD code. The actual values in cstate_cfg_table haven't been checked against the reference code yet. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5157fc031c5b19d8633132222520f582620208c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-06soc/amd: rename ACPI_CPU_CONTROL to ACPI_CSTATE_CONTROL for non-CAR CPUsFelix Held
The legacy ACPI CPU control registers in IO space where the first 4 IO locations control the CPU throttling value don't exist any more on the Zen-based CPUs. Instead this IO address is written to MSR_CSTATE_ADDRESS in set_cstate_io_addr which will cause accesses from the 8 IO addresses beginning with ACPI_CSTATE_CONTROL to be trapped in the CPU core. Reads from those IO addresses will cause the CPU to enter low C states. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2c34e201cc0add1026edd7a97c70aa57f057782b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-06soc/amd/*/acpi: drop unnecessary duty_offset/duty_width field writesFelix Held
The FADT data structure is zero-initialized in acpi_create_fadt which then calls the SoC-specific acpi_fill_fadt function, therefore it's not needed to assign 0 to the duty_offset and duty_width FADT field in acpi_fill_fadt for all SoC except Stoneyridge. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib63b24891d44298841153dfc500b030619e1a5ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/73421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-06soc/amd/*/acpi: drop unneeded pstate_cnt FADT assignmentFelix Held
The FADT data structure is zero-initialized in acpi_create_fadt which then calls the SoC-specific acpi_fill_fadt function, therefore it's not needed to assign 0 to the pstate_cnt FADT field in acpi_fill_fadt. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If3ddb466de1d437361d811e45e328a1dbff02fcc Reviewed-on: https://review.coreboot.org/c/coreboot/+/73419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-06soc/amd/*/acpi: drop unneeded mon_alrm FADT assignmentFelix Held
The FADT data structure is zero-initialized in acpi_create_fadt which then calls the SoC-specific acpi_fill_fadt function, therefore it's not needed to assign 0 to the mon_alrm FADT field in acpi_fill_fadt. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iabb5fc7367f1e4e7acea1a58abdb643fc46ca776 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-28soc/amd: introduce and use PSTATE_MSR macroFelix Held
Instead of adding the P-state number to the PSTATE_0_MSR number to get the P-state MSR number for the rdmsr call, provide a macro that directly calculates the MSR number for a given power state. Also drop the unused PSTATE_[1..4]_MSR definitions which also didn't cover all P-state MSRs available in the hardware. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If85acf556efe82c209e1608e56c05f7a2a748403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-02-28soc/amd/*/acpi: add comment about p_lvl[2,3]_lat FADT field usageFelix Held
The latency values in the _CST package override the values in the p_lvl2_lat and p_lvl3_lat FADT fields. In Picasso, Cezanne, Mendocino, Phoenix and Glinda generate_cpu_entries generates the _CST packages for each CPU device. The coreboot code for Stoneyridge doesn't generate _CST packages for the CPU objects, but those are provided via the PSTATE SSDT binaryPI generates and agesa_write_acpi_tables gets and adds to the ACPI tables. The AGESA reference code also sets those two FADT entries to the equivalents of ACPI_FADT_C2_NOT_SUPPORTED and ACPI_FADT_C3_NOT_SUPPORTED so this also matches the AGESA behavior. From the ACPI 6.4 spec: "Values provided by the _CST object override P_LVLx values in P_BLK and P_LVLx_LAT values in the FADT." Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1116a3013576b18b6f521604d6b0a9d75b971e0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-02-16soc/amd/glinda: Remove non-functional APCB checkFred Reitberger
The way the PSP_APCB_FILES list is created will always insert at least a space into it. When tested by the if, this space will prevent the else clause from ever running and never generate a build error. Remove the non-functional check. Instead, mainboards should select warn_no_apcb or die_no_apcb to generate a warning message or build error if the APCB is missing. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I26b96966495dc35a8b4a0cb7d5a841f3812f2a70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73007 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-14amdfwtool: use SoC ID info instead of misleading comboable flagZheng Bao
Since it actually depends on the SoC type whether the old PSP directory table pointer or the new comboable PSP directory table pointer is used in EFS, get this information from the SoC ID instead of passing the comboable flag for the SoCs that need to use the new comboable PSP directory table pointer. TEST=Binary identical on amd/majolica, pcengines/apu2, amd/gardenia Change-Id: I0c3f21065939d1b13c2607aba16cbef74dd8d389 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-11soc/amd/*/Makefile.inc: remove command line soc-nameZheng Bao
The function has already moved to fw.cfg. 4/5 of split changes of https://review.coreboot.org/c/coreboot/+/58552/28 Change-Id: Idf9e491ed46ae574ccd17f24925e3e5c595039fa Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-11soc/amd/*: Add SOC_NAME in fw.cfg(s)Zheng Bao
2/5 of split changes of https://review.coreboot.org/c/coreboot/+/58552/28 Change-Id: I18f73462a3995038fe93750320dfc053fec969ba Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-10soc/amd(MDN/PHX/Glinda): Update DISABLE_KEYBOARD_RESET_PIN helpMartin Roth
For MDN, PHX, & Glinda platforms, the Keyboard Reset functionality has been moved from GPIO 129 to GPIO 21. Additionally, the issue where the system would reset when the KBDRST_L pin went low even when not configured for Keyboard reset seems to have been fixed, so remove that text. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Iefe7e00d63777577b59ee98cb974b07afea1fd12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72912 Reviewed-by: Jon Murphy <jpmurphy@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09arch/x86/include/cpu: introduce CPU_TABLE_END CPU table terminatorFelix Held
Instead of having a magic entry in the CPU device ID table list to tell find_cpu_driver that it has reached the end of the list, introduce and use CPU_TABLE_END. Since the vendor entry in the CPU device ID struct is compared against X86_VENDOR_INVALID which is 0, use X86_VENDOR_INVALID instead of the 0 in the CPU_TABLE_END definition. TEST=Timeless build for Mandolin results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I0cae6d65b2265cf5ebf90fe1a9d885d0c489eb92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72888 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08soc/amd: use CPUID_FROM_FMS macro instead of magic numbersFelix Held
Port over the remaining AMD SoCs to use CPUID_FROM_FMS. The Glinda CPUID still needs to be updated to the actual CPUID, but for now just change it to use CPUID_FROM_FMS. TEST=Resulting image of timeless build for Gardenia (Stoneyridge), Majolica (Cezanne), Chausie (Mendocino), Mayan (Phoenix) and Birman (Glinda) don't change. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia508f857d06f3c15e3ac9f813302471348ce3d89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72862 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/glinda/cpu: use CPUID_ALL_STEPPINGS_MASKFelix Held
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Glinda steppings once GLINDA_A0_CPUID is updated. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic9b8cbb2dc925a8258db6a4eb0d1b00b2745637f Reviewed-on: https://review.coreboot.org/c/coreboot/+/72852 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08arch/x86/cpu: introduce and use device_match_maskFelix Held
Instead of always doing exact matches between the CPUID read in identify_cpu and the device entries of the CPU device ID table, offer the possibility to use a bit mask in the CPUID matching. This allows covering all steppings of a CPU family/model with one entry and avoids that case of a missing new stepping causing the CPUs not being properly initialized. Some of the CPU device ID tables can now be deduplicated using the CPUID_ALL_STEPPINGS_MASK define, but that's outside of the scope of this patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0540b514ca42591c0d3468307a82b5612585f614 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72847 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-08soc/amd/*/data_fabric: introduce and use DF_MMIO_REG_SET_SIZEFelix Held
To be able to handle a special case, add a per-SoC define for DF_MMIO_REG_SET_SIZE instead of having this hard-coded as 4 in the DF_MMIO_* macros. To avoid some duplication, also introduce the DF_MMIO_REG_OFFSET macro. TEST=Output from data_fabric_print_mmio_conf doesn't change on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I67420a2973c8ef9a7f0ce19ddc0013de69731689 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08soc/amd/*/data_fabric: rename define for MMIO decode register set countFelix Held
This should make it a bit clearer that those registers are in the data fabric configuration registers. Also move those defines right after the register definition those are related to. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic107bd217f4af0a9ddfbe41aafd3c882aa968e22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-06soc/amd/glinda: remove LIDS field from global NVSFelix Held
Since the LIDS field is only used in the ACPI code and not in the C code of any mainboard using the Glinda SoC, remove it form the global NVS. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I627d05c09d9637caf15e17285dd2c8e0389747c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-02-04soc/amd: Use common reset code for PHX & Glinda SoCsMartin Roth
This switches the Phoenix & Glinda SoCs to use the common reset code. Cezanne and newer do not support warm reset, so use cold resets in all cases (including the OS). Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I4593fa9766ac9e988722a02e355c971e147b8fae Reviewed-on: https://review.coreboot.org/c/coreboot/+/72754 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-31soc/amd/glinda/acpi: use acpigen_write_processor_deviceFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iec9cf7c195fa5cb5c8d992aeab400d05cbe801c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-01-22soc/amd/*: Enable override of MAINBOARD_BLOBS_DIRFred Reitberger
MAINBOARD_BLOBS_DIR is defined the same way by picasso/cezanne/mendocino/phoenix/glinda and unused by stoneyridge, so move it to a common area. This makefile variable is currently only used to locate APCB blobs for the different mainboards. Add a Kconfig option to point to the APCB blobs directory. This allows simple overriding to locations such as site-local. TEST=Timeless builds Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I0702fdb97fbc2c73d97994ab4d5161ff0f467518 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69410 Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-20soc/amd/glinda,mendocino,phoenix/espi_util: add comment about registerFelix Held
Even though the register name begins with ESPI, it resides in the SPI registers and not in the eSPI registers, so add a comment to point this out to hopefully avoid some confusion. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9f8d15ceb98f51aad0816021f98ec5c78953e7f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-01-20soc/amd/glinda/espi_util: update file to match documentationFelix Held
Checked against document #57396 revision 1.52 and removed the DIS_ESPI_MASCTL_REG_WR define, since that bit is marked as reserved. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3e8b1c65118b4e85e7934e822a7a7e329746a88d Reviewed-on: https://review.coreboot.org/c/coreboot/+/72121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-01-20soc/amd/glinda: clean up global NVSFelix Held
From Cezanne on, the TMPS, TCRT and TPSV fields are unused in both the C and ACPI code, so they can be removed. Also remove the unused fields that were previously used for PCNT and PWRS. The LIDS field is only used in the ACPI code, but keep if for now, since it would require a bigger rework to remove it from the global NVS. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie1c3c25591deadb27b7bf38a81dcd6fe746de55b Reviewed-on: https://review.coreboot.org/c/coreboot/+/72096 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-18soc/amd/*/agesa_acpi: add TODO for adding CRAT tableFelix Held
The Picasso SoC code generates a CRAT ACPI table which is not done for Cezanne and newer. A significant part of the Picasso CRAT generation code can likely be moved to the common AMD SoC code and then used in all SoCs, but this still needs to be checked. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8f1ebe74f0376c60396dbd80e64676d1374ed811 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72027 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-18soc/amd/glinda/agesa_acpi: use acpi_align_current to align IVRS & ALIBFelix Held
This changes the alignment of the IVRS table from 8 bytes to 16 bytes and aligns the ALIB table to a 16 byte boundary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I965791fbbe499702e191dcbf1f5fbfcb5e1bab6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/72026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 16:21:26 +0000