Age | Commit message (Collapse) | Author |
|
Change-Id: I5cd04972936c14d92295915fad65c7a45a8108d9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
How it approximately works:
(During a normal system run):
1. OS puts a capsule into RAM and calls UpdateCapsule() function of EFI
runtime
2. If applying the update requires a reboot, EFI implementation creates
a new CapsuleUpdateData* EFI variable pointing at the beginning of
capsules description (not data, but description of the data) and does
a warm reboot leaving capsule data and its description in RAM to be
picked by firmware on the next boot process
(After DEV_INIT:)
3. Capsules are discovered by checking for CapsuleUpdateData* variables
4. Capsule description in memory and capsule data is validated for
sanity
5. Capsule data is coalesced into a continuous piece of memory
(On BS_WRITE_TABLES via dasharo_add_capsules_to_bootmem() hook:)
6. Buffer with coalesced capsules is marked as reserved
(On BS_WRITE_TABLES via lb_uefi_capsules() hook:)
7. coreboot table entry is added for each of the discovered capsules
(In UEFI payload:)
8. CapsuleUpdateData* get removed
9. coreboot table is checked for any update capsules which are then
applied
Change-Id: I162d678ae5c504906084b59c1a8d8c26dadb9433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
The underlying IMD function already returns an integer which indicates
success or failure.
This removes the need to have initialized variables that need to be
checked for NULL later. In some cases this actually adds the appropriate
check for returned values.
Dying is appropriate if cbmem is not found as it is essential to the
bootflow.
Change-Id: Ib3e09a75380faf9f533601368993261f042422ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch adds a GBB flag to coreboot, which, when enabled, enforces
CSE sync even if the current CSE version matches the version in CBFS.
The CSME sync GBB and flag are designed to enhance autotest
functionalities and are not intended or recommended for use in
developing any other features.
BUG=b:353053317
TEST=futility gbb --help
Cq-Depend: chromium:5718196
Change-Id: I6352959e1e898a90b4c6e12a22f8d6513f90ded9
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83685
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most x86 platforms use CMOS as the vboot nvdata (VBNV) backend storage.
On some platforms such as AMD, certain CMOS registers must be configured
before accessing the CMOS RAM which contains VBNV. More precisely,
according to AMD's spec [1], the bit 4 of Register A of CMOS is bank
selection. Since VBNV is accessed via bank 0 (see the MC146818 driver),
the bit must be cleared before the VBNV can be successfully written to
CMOS. Saving VBNV to CMOS may fail in verstage, if CMOS has lost power.
In that case, all the CMOS registers would contain garbage data.
Therefore, for AMD platforms the bit must be cleared in verstage, prior
to the first save_vbnv_cmos() call.
Introduce vbnv_platform_init_cmos(), which is no-op by default, and can
be defined per platform. The function will be called from vbnv_init() if
VBOOT_VBNV_CMOS.
[1] 48751_16h_bkdg.pdf
BUG=b:346716300
TEST=none
BRANCH=skyrim
Change-Id: Ic899a827bd6bb8ab1473f8c6c03b9fde96ea6823
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83494
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If BMP_LOGO is set, currently display_init_required() will always return
1, so that platform code will always initialize display. However, that
information isn't passed to vboot, which may result in unnecessary extra
reboots, for example when the payload needs to request display init (by
vb2api_need_reboot_for_display()).
Since there is already a Kconfig option VBOOT_ALWAYS_ENABLE_DISPLAY to
tell vboot that "display is available on this boot", enable it by
default if BMP_LOGO is set.
BUG=b:345085042
TEST=none
BRANCH=none
Change-Id: I20113ec464aa036d0498dedb50f0e82cb677ae93
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Code dealing with PAE can be used outside of memset_pae(). This change
extracts creation of identity mapped pagetables to init_pae_pagetables()
and mapping of single 2 MiB map to pae_map_2M_page(). Both functions are
exported in include/cpu/x86/pae.h to allow use outside of pgtbl.c.
MEMSET_PAE_* macros were renamed to PAE_* since they no longer apply
only to memset_pae().
Change-Id: I8aa80eb246ff0e77e1f51d71933d3d00ab75aaeb
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82249
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<stdio.h> header is used for input/output operations (such as printf,
scanf, fopen, etc.). Although some input/output functions can manipulate
strings, they do not need to directly include <string.h> because they
are declared independently.
Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code used to reserve MEMSET_PAE_PGTL_SIZE (20 KiB) for page used
for clearing the memory above 4 GiB that was assumed to be 2 MiB page.
memset_pae() checks only the alignment and not the size of this region,
so no error was reported by it.
In most cases this reserved memory in 2-4 MiB range, and because this
range isn't usually used by coreboot (architectural stuff is located in
lower 1 MiB, coreboot tables and ramstage are close to TOLUM and payload
isn't yet loaded when the broken code is executed), it never caused any
problems.
Change MEMSET_PAE_PGTL_SIZE to MEMSET_PAE_VMEM_SIZE and fix wrong macro
definition to reserve properly sized region.
Change-Id: I0df15b0d1767196fe70be14d94428ccdf8dbd5d3
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The cr50.c file currently prints "cr50" in debug messages no
matter the system is using Cr50 or Ti50. This can be confusing
for developers.
This patch replaces "cr50" with "GSC" in debug messages. Using
"GSC" makes the messages more clear and easier to search via
`grep`.
BUG=none
TEST=Build and test on karis
Change-Id: I21f66cf8b608ca4e4dc82d7a55a851ec996c8bb3
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82420
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Fix checkpatch error.
Change-Id: I890fcfa4ad7b7abe032248b435271514e8e264f3
Signed-off-by: Naveen R. Iyer <iyernaveenr@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82001
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Starting from here CONFIG_TPM1 and CONFIG_TPM2 are no longer mutually
exclusive.
Change-Id: I44c5a1d825afe414c2f5c2c90f4cfe41ba9bef5f
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69162
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most of the original secdata_tpm.c was TPM2-specific implementation.
Just moving the code around, with trivial tweaks:
- drop now unnecessary #ifdef directives from _factory_initialize_tpm()
- drop leading underscore from _factory_initialize_tpm{1,2}() (external
identifiers should not start with an underscore in C)
- drop unused <security/vboot/tpm_common.h> include and sub-includes of
tss.h which should be considered its part (so this isn't an indirect
inclusion)
- fixed formatting of RETURN_ON_FAILURE() which didn't have slashes
aligned no matter what tab width was used
Change-Id: I0090b748d7d3b2d76a941b87b5885682fd81c4fc
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81415
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This prepares the code for enabling both CONFIG_TPM1 and CONFIG_TPM2
during compilation, in which case actual TPM family in use can be
determined at runtime.
In some places both compile-time and runtime checks are necessary.
Yet in places like probe functions runtime state checks don't make sense
as runtime state is defined by results of probing.
Change-Id: Id9cc25aad8d1d7bfad12b7a92059b1b3641bbfa9
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69161
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
No functional changes. Refactor code such that there won't be any
compiler or linker errors if TSS 1.2 and TSS 2.0 were both compiled
in.
One might want to support both TPM families for example if TPM is
pluggable, while currently one has to reflash firmware along with
switching TPM device.
Change-Id: Ia0ea5a917c46ada9fc3274f17240e12bca98db6a
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Via an out parameter. This is needed to be able to dynamically pick TSS
implementation based on the information discovered on probing.
Change-Id: I5006e0cdfef76ff79ce9e1cf280fcd5515ae01b0
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69159
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This also sets a good default in arch and vboot to have a separate
romstage when it makes sense.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I09ab5f8c79917bf93c9d5c9dfd157c652478b186
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80580
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch passes the correct flag to vboot to enable SIMD crypto
acceleration on arm64 devices. This uses a core part of the ISA and
should thus be supported on all arm64 SoCs -- so we normally always
want it enabled, but there should still be a Kconfig in case a SoC wants
to use the hwcrypto interface for its own (off-CPU) crypto acceleration
engine instead. (You could also disable it to save a small amount of
code size at the cost of speed, if necessary.)
Change-Id: I3820bd6b7505202b7edb6768385ce5deb18777a4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: Ie63499a4b432803a78af1c52d49e34cf1653ba17
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80589
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At the moment this is to handle the situation when device ID is the
same for TPM1 and TPM2 versions of a device. Later this TPM family will
be returned to the caller.
Change-Id: I23b85e6da0e02999704f3ec30412db0bdce2dd8a
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I4bdfcd0cc0e2d9b5f884ea7275659c12488715e0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80194
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41f8a9b5d1bdb647a915da1a5e95161b2e34df28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80082
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To verify the boot chain, we will need to extend the PCR with the
firmware version. And the server will be able to attest the firmware
version of devices.
The "firmware version" here is the RW firmware anti-rollback version,
determined by the ChromeOS's signing infra, and will be verified in
vb2api_fw_phase3, by comparing it with the version stored in the TPM.
This version will be increased when there is critical vulnerability
in the RW firmware.
According to [1], PCRs 8-15 usage is defined by Static OS. Therefore
PCR_FW_VER is chosen to be within that range. Ideally the existing
PCR_BOOT_MODE and PCR_HWID should also be allocated in the same range,
but unfortunately it's too late to fix them. Because PCRs 11 and 13
have been used for other purposes in ChromeOS, here PCR_FW_VER is set
to 10.
[1] https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClient_PFP_r1p05_05_3feb20.pdf
BUG=b:248610274
TEST=Boot the device, and check the PCR 10
BRANCH=none
Signed-off-by: Yi Chou <yich@google.com>
Change-Id: I601ad31e8c893a8e9ae1a9cdd27193edce10ec61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79437
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables retrieval of factory configuration data from
Google TPM devices (both Cr50 and Ti50).
This patch utilizes vendor-specific command
TPM2_CR50_SUB_CMD_GET_FACTORY_CONFIG (68).
The factory config space is a 64-bit, one-time programmable.
For the unprovisioned one, the read will be 0x0.
BUG=b:317880956
TEST=Able to retrieve the factory config from google/screebo.
Change-Id: Ifd0e850770152a03aa46d7f8bbb76f7520a59081
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79736
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add `VBOOT_X86_RSA_ACCELERATION' Kconfig option to enable SSE2
instruction set implementation of modulus exponentiation which is part
of the RSA signature verification process.
BUG=b:312709384
TEST=Able to use SSE2 accelerated implementation on rex0
Change-Id: Ib6e39eb9f592f36ad3dca76c8eaf2fe334704265
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79289
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This updates all warnings currently being printed under the files_added
and build_complete targets to the show_notices target.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia14d790dd377f2892f047059b6d24e5b5c5ea823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79423
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
vboot_fw.a is built via a sub-invocation of make, but make is not able
to track dependencies between different invocations. That means the
toplevel make assumes that the vboot_fw.a target depends only on the
dependencies explicitly listed in coreboot's Makefile (only config.h in
this case), and thus assumes that if config.h didn't change it does not
need to rebuild the library. This breaks incremental builds when files
inside the vboot repository change.
This patch marks the target as .PHONY so that it will always be rebuilt.
The vboot Makefile's own dependency tracking will then ensure that on an
incremental build we only rebuild the vboot sources that actually
changed, so if nothing changed this will just add a simple and quick
$(AR) call.
Change-Id: I8bdd4e1589124914ba1e877e04b40ee709ea4140
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79375
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For ChromeOS platform the recovery reason is cleared in
vb2api_kernel_phase2 which is probably not called by any non-ChromeOS
system. It results in the platform being stuck in recovery mode, e.g.
when RW firmware verification fails. Even if the RW partition is
flashed with correctly signed image, the persistent non-zero recovery
reason will prevent vboot from attempting the RW partition check.
Use the newly exposed vb2api_clear_recovery and
VBOOT_CLEAR_RECOVERY_IN_RAMSTAGE Kconfig option to clear the recovery
reason and save it immediately to the VBNV. The idea is to let
non-ChromeOS coreboot platform to clear the recovery reason when
needed.
TEST=Clear the recovery reason in mainboard_final function right
before payload jump when RW partition is corrupted and RW partition is
valid. In case it is corrupted, the platform stays in recovery mode,
when valid the platform boots from RW partition. Tested on MSI PRO
Z690-A DDR4.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7ffaf3e8f61a28a68c9802c184961b1b9bf9d617
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74343
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code for "phase 4" of firmware verification currently only sets a
recovery reason when there's an actual hash mismatch detected in
vb2api_check_hash_get_digest(). This is the most likely way how this
section of code can fail but not the only one. If any other unexpected
issue occurs, we should still set a recovery reason rather than just
reboot and risk an infinite boot loop.
This patch adds a catchall recovery reason for any error code that falls
out of this block of code. If a more specific recovery reason had
already been set beforehand, we'll continue to use that -- if not, we'll
set VB2_RECOVERY_FW_GET_FW_BODY.
Change-Id: If00f00f00f00aa113e0325aad58d367f244aca49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78866
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In vboot_get_context(), vb2api_reinit() is called to restore the vboot
context from the previous stage. We use assert() for the return value of
vb2api_reinit() because there shouldn't be runtime errors, except for
one edge case: vb2_shared_data struct version mismatch. More precisely,
when RW firmware's VB2_SHARED_DATA_VERSION_MINOR is greater than RO's,
vb2api_reinit() will return VB2_ERROR_SHARED_DATA_VERSION.
To avoid using an invalid vb2_context pointer (when FATAL_ASSERTS is
disabled), change assert() to die() on vb2api_reinit() failure. For the
vb2api_init() case the assertion is unchanged because there shouldn't be
any runtime error for that.
Also move the vb2api_init() call outside the assert() argument, as
assert() may be a no-op macro depending on the implementation.
Change-Id: I4ff5ef1202bba2384c71634ec5ba12db1b784607
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
init() was always followed by open() and after successful initialization
we only need send-receive function which is now returned by tis_probe()
on success, thus further reducing number of functions to export from
drivers.
This also removes check for opening TIS twice that seems to have no
value.
Change-Id: I52ad8d69d50d449f031c36b15bf70ef07986946c
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76954
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Having a separate romstage is only desirable:
- with advanced setups like vboot or normal/fallback
- boot medium is slow at startup (some ARM SOCs)
- bootblock is limited in size (Intel APL 32K)
When this is not the case there is no need for the extra complexity
that romstage brings. Including the romstage sources inside the
bootblock substantially reduces the total code footprint. Often the
resulting code is 10-20k smaller.
This is controlled via a Kconfig option.
TESTED: works on qemu x86, arm and aarch64 with and without VBOOT.
Change-Id: Id68390edc1ba228b121cca89b80c64a92553e284
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55068
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit 7499d9610016c4a89b722498885f196ed6d217aa.
Reason for revert: coreboot build fails
Change-Id: I8ef853d81ee9b1f18d36dfd82cdf687381ece2c6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78845
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The code for "phase 4" of firmware verification currently only sets a
recovery reason when there's an actual hash mismatch detected in
vb2api_check_hash_get_digest(). This is the most likely way how this
section of code can fail but not the only one. If any other unexpected
issue occurs, we should still set a recovery reason rather than just
reboot and risk an infinite boot loop.
This patch adds a catchall recovery reason for any error code that falls
out of this block of code. If a more specific recovery reason had
already been set beforehand, we'll continue to use that -- if not, we'll
set VB2_RECOVERY_FW_GET_FW_BODY.
Change-Id: If00f8f8a5d17aa113e0325aad58d367f244aca49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78821
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
STM_RSC_MEM_DESC defines rws_attributes as 3 bits, which can't be
greater than 7.
Found-by: Coverity Scan #1430578
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1efd007e96abd6d5d36f314752abfadffb0024d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The macro ENV_HAS_CBMEM achieves the same as this inline function.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6d65ca51c863abe2106f794398ddd7d7d9ac4b5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77166
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Set default to enabled for hibernate on setup failure for all devices
using a Google EC. This will have no impact on devices that don't
bring the GSC down on hibernate, but will provide a recovery path
for all devices that do.
BUG=b:296439237
TEST=Force error on Skyrim with custom build, boot normally with
normal build
Change-Id: I2d9e8f75b25fb6c530a333024c342bea871eb85d
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78098
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add additional failure mode logic for the TPM to enable an
automated recovery mode for GSC hangs.
BUG=b:296439237
TEST=Force the error by hard coding the return code and observe the
device entering hibernate.
BRANCH=None
Change-Id: Ieec7e9227d538130354dea8b772d0306cdda1237
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77667
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert TPM functions to return TPM error codes(referred to as
tpm_result_t) values to match the TCG standard.
BUG=b:296439237
TEST=build and boot to Skyrim
BRANCH=None
Change-Id: Ifdf9ff6c2a1f9b938dbb04d245799391115eb6b1
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77666
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert hex print values to use the %#x qualifier to print 0x{value}.
BUG=b:296439237
TEST=build and boot to Skyrim
BRANCH=None
Change-Id: I0d1ac4b920530635fb758c5165a6a99c11b414c8
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78183
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adopt TCG standard naming and definitions for TPM Return codes.
BUG=b:296439237
TEST=Build and boot to OS on skyrim
BRANCH=None
Change-Id: I60755723262ec205a4c134948b0250aac4974d35
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77665
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This PCR digest length check is no longer necessary.
Signed-off-by: Yi Chou <yich@google.com>
Change-Id: I256938c69be7787f5c8fca3e633ac93a69368452
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78084
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Remove the unnecessary tss_common.h header from the repo.
tss_errors.h is a more appropriate place for the TPM_SUCCESS
value, and the other define is only used by tpm_common.c and
can be placed there.
BUG=b:296439237
TEST=Builds
Change-Id: I99cf90f244a75c1eeab5e9e1500e05c24ae0a8e5
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78033
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Make naming convention consistent across all functions return values.
BUG=b:296439237
TEST=Boot to OS on Skyrim
BRANCH=None
Change-Id: If86805b39048800276ab90b7687644ec2a0d4bee
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77536
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add the TPM return code to the vboot fail call to provide additional
context.
BUG=None
TEST=builds
Change-Id: Ib855c92d460d1e728718b688ff71cdc6e1d9a84a
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Since vboot_extend_pcr() returns vb2_error_t, the return type of
extend_pcrs() should be vb2_error_t too.
Also fix an assignment for vboot_locate_firmware(), which returns int
instead of vb2_error_t.
Change-Id: I1a2a2a66f3e594aba64d33cfc532d1bd88fa305e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
coreboot offers two vboot schemes VBOOT_SLOTS_RW_A and
VBOOT_SLOTS_RW_AB. When VBOOT_SLOTS_RW_AB is not selected then the
resulting image is rather not expected to have the FW_MAIN_B FMAP
region. When only RW_A region is used, vboot does additional full_reset
cycles to try RW_B, even though it does not exist / the build was not
configured for two RW partitions. To avoid it, a new vboot context
flag has been introduced, VB2_CONTEXT_SLOT_A_ONLY, which can be set
right after context initialization to inform vboot about absence of
slot B. This will result in less full_reset cycles when vboot runs
out of available slots and cause vboot to switch to recovery mode
faster.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie123881a2f9f766ae65e4ac7c36bc2a8fce8d100
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75462
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
x86 pre-memory stages do not support the `.data` section and as a
result developers are required to include runtime initialization code
instead of relying on C global variable definition.
To illustrate the impact of this lack of `.data` section support, here
are two limitations I personally ran into:
1. The inclusion of libgfxinit in romstage for Raptor Lake has
required some changes in libgfxinit to ensure data is initialized at
runtime. In addition, we had to manually map some `.data` symbols in
the `_bss` region.
2. CBFS cache is currently not supported in pre-memory stages and
enabling it would require to add an initialization function and
find a generic spot to call it.
Other platforms do not have that limitation. Hence, resolving it would
help to align code and reduce compilation based restriction (cf. the
use of `ENV_HAS_DATA_SECTION` compilation flag in various places of
coreboot code).
We identified three cases to consider:
1. eXecute-In-Place pre-memory stages
- code is in SPINOR
- data is also stored in SPINOR but must be linked in Cache-As-RAM
and copied there at runtime
2. `bootblock` stage is a bit different as it uses Cache-As-Ram but
the memory mapping and its entry code different
3. pre-memory stages loaded in and executed from
Cache-As-RAM (cf. `CONFIG_NO_XIP_EARLY_STAGES`).
eXecute-In-Place pre-memory stages (#1) require the creation of a new
ELF segment as the code segment Virtual Memory Address and Load Memory
Address are identical but the data needs to be linked in
cache-As-RAM (VMA) but to be stored right after the code (LMA).
Here is the output `readelf --segments` on a `romstage.debug` ELF
binary.
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x02000000 0x02000000 0x21960 0x21960 R E 0x20
LOAD 0x0219e0 0xfefb1640 0x02021960 0x00018 0x00018 RW 0x4
Section to Segment mapping:
Segment Sections...
00 .text
01 .data
Segment 0 `VirtAddr` and `PhysAddr` are at the same address while they
are totally different for the Segment 1 holding the `.data`
section. Since we need the data section `VirtAddr` to be in the
Cache-As-Ram and its `PhysAddr` right after the `.text` section, the
use of a new segment is mandatory.
`bootblock` (#2) also uses this new segment to store the data right
after the code and load it to Cache-As-RAM at runtime. However, the
code involved is different.
Not eXecute-In-Place pre-memory stages (#3) do not really need any
special work other than enabling a data section as the code and data
VMA / LMA translation vector is the same.
TEST=#1 and #2 verified on rex and qemu 32 and 64 bits:
- The `bootblock.debug`, `romstage.debug` and
`verstage.debug` all have data stored at the end of the `.text`
section and code to copy the data content to the Cache-As-RAM.
- The CBFS stages included in the final image has not improperly
relocated any of the `.data` section symbol.
- Test purposes global data symbols we added in bootblock,
romstage and verstage are properly accessible at runtime
#3: for "Intel Apollolake DDR3 RVP1" board, we verified that the
generated romstage ELF includes a .data section similarly to a
regular memory enabled stage.
Change-Id: I030407fcc72776e59def476daa5b86ad0495debe
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Previously the clear_ec_ap_idle() is implemented in
cr50_enable_update.c and be called in the file. Move it to
common code so that it can be called in cse_board_reset.c
TEST=emerge-brask coreboot
Change-Id: I2dbe41b01e70f7259f75d967e6df694a3e0fac23
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77631
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Change-Id: Id35a0a589128ea2dfb2f0e5873d4fa087b0886a9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I0d2a9c30d332b16efd548433a54f974067bd281e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the commonlib, console, northbridge, security, and
southbridge directories that don't already have an SPDX license line
at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I02804a10d0b0355e41271a035613d9f3dfb122f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Recent ChromeOS devices use Ti50 instead of Cr50. Therefore, some
strings or comments are not accurate anymore. When applicable, rename
Cr50 to GSC (Google security chip).
BUG=b:275544927
TEST=./util/abuild/abuild -x -t GOOGLE_TOMATO -a
BRANCH=none
Cq-Depend: chromium:4756700
Change-Id: Ie5b9267191a5588830ed99a8382ba1a01933028f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I3ab3538b276fee5ed135bb4e88d9ef2cd6a00bb9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76843
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I79e4b34fe682f5f21415cb93cf65394881173b34
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76842
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The preram TPM log was being copied to the end of the CBMEM TPM log no
matter what the size of the CBMEM TPM log was. Eventually, it would
overwrite anything else in CBMEM beyond the TPM log.
This can currently be reproduced by enabling TPM_MEASURED_BOOT and
performing multiple S3 suspends, as coreboot is incorrectly performing
TPM measurements on S3 resume.
Change-Id: If76299e68eb5ed2ed20c947be35cea46c51fcdec
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73297
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The static function read_space_firmware() is used only once, so merge it
into antirollback_read_space_firmware(). Also change a debug log to
error.
BUG=none
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: I8abcb8b90e82c3e1b01a2144070a5fde6fe7157f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
tis_plat_irq_status() function is used only by Google TPM. It should
be moved to drivers/tpm/cr50.c. The name of the function was changed
to cr50_plat_irq_status().
BUG=b:277787305
TEST=Build all affected platforms
Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Commit d054bbd4f1ba ("Makefile.inc: fix multiple jobs build issue")
added a dependency on $(obj)/fmap_config.h to all .c source files in all
stages, so it's not needed any more to add it as a dependency to files
that include fmap_config.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b62917f32ae9f51f079b243a606e5db07ca9099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76002
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \
src/commonlib/include/commonlib/console/post_codes.h;
myArray=`grep -e "^#define POSTCODE_" \
src/commonlib/include/commonlib/console/post_codes.h | \
grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`;
for str in ${myArray[@]}; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r POST_$splitstr src | \
cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g";
grep -r "POST_$splitstr" util/cbfstool | \
cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g";
done
Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8
Signed-off-by: lilacious <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
It seems that using a wildcard (*) in the import path is not supported
in the context of the Makefile.
This to fix this error:
malformed import path "cmd/cbnt-prov/*.go": invalid char '*'
Change-Id: I953e06f1ff70a2b61bc5f505f7df9936b7f9b55b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Board IDs are now filled in as part of the signing process, so we don't
need to set them in coreboot.
BUG=b:240620735
TEST=Build and check VBOOT_GSC_BOARD_ID is set to ZZCR.
Change-Id: I7dda8ad59046a1dd9a28595e037eda86e91c98df
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75641
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This updates the go modules in the intel-sec-tools git submodule. This
is not needed.
Change-Id: I2012d519b07321317fef415df892bbb966512ee2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55845
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
vboot code changes have eliminated the redundant call to WP the EC-RO
region as protecting RW flash implies protecting both RO and RW flash,
so the call to protect RO is redundant. google/rex currently takes
about 17 ms to lock down the EC.
Along with vboot changes, this patch drops argument to choose between
RO and RW slot to protect while calling into `vb2ex_ec_protect()`.
It ensures vb2ex_ec_protect() is explicitly meant for protecting RW
regions.
w/o this patch:
517:waiting for EC to allow higher power draw 846,196 (17,297)
w/ this patch:
517:waiting for EC to allow higher power draw 838,258 (9,719)
Additionally, update vboot submodule to upstream main to avoid the
compilation error.
Updating from commit id 35f50c3154e5:
Fix build error when compiling without -DNDEBUG
to commit id 034907b279c9db:
vboot_reference: eliminate redundant call to write protect EC-RO
Change-Id: I2974f0cb43ba800c2aaeac4876ebaa052b5ee793
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
At this moment, only GBB flags are moved from PCR-0 to PCR-1 when
vboot-compatibility is not enabled.
Change-Id: Ib3a192d902072f6f8d415c2952a36522b5bf09f9
Ticket: https://ticket.coreboot.org/issues/424
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Currently this is only used in bootblock and expects a fixed offset.
Change-Id: I3c4db6fffe3343f12383fe9585620ffefb01cf81
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
Pre-RAM TPM logs use a separate define for the max number of logs. This
one fits into the 2 KiB region assigned to TPM_LOG in the CAR linker
script.
Change-Id: Idda08a33c4a29fcb50085ca93487585dedf11012
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Used by default for all boards with TPM2 which don't specify log
format explicitly.
Change-Id: I0fac386bebab1b7104378ae3424957c6497e84e1
Ticket: https://ticket.coreboot.org/issues/422
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Used by default for all boards with TPM1 which don't specify log format
explicitly.
Ticket: https://ticket.coreboot.org/issues/423
Change-Id: I89720615a75573d44dd0a39ad3d7faa78f125843
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
After first recovery request coreboot would get stuck in bootloop with
VB2_RECOVERY_PREAMBLE as recovery reason due to not checking whether
coreboot is alread in recovery mode, and calling failing code.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Idc947a1d150ff6487cf973b36bf4f0af41daa220
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add Kconfig option for VBOOT_ARMV8_CE_SHA256_ACCELERATION, which will
use ARMv8 Crypto Extension for SHA256[1] instead of software
implementation.
This will speed up firmware verification in verstage.
[1] https://crrev.com/c/4170144
BUG=b:263514393
BRANCH=corsola
TEST='calculating body hash (SHA2)' get 13 msecs improvement on
Tentacruel.
Before:
509:finished calculating body hash (SHA2) 161,548 (14,490)
After:
509:finished calculating body hash (SHA2) 155,101 (1,187)
Change-Id: I02671338fd9e0deb5294dbb7c03528061edc18c4
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72711
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add methods to store and retrieve the hash of the data stored in the
VBIOS cache FMAP region. Add a dedicated index in TPM NVRAM to store
the hash, and methods to calculate/read/write it.
Modeled after mrc_cache_hash_tpm.{c,h}
BUG=b:255812886
TEST=tested with rest of patch train
Change-Id: I030017d3bf956b8593bc09073ad6545b80a5b52b
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
We don't need flashrom support just for vboot payloads. The current
default (USE_FLASHROM=1) is mostly harmless, especially if libflashrom
is not present (the autodetection in vboot_reference just spits out a
pkg-config error but doesn't actually fail the build), but it's better
to be clear we don't need it.
BUG=b:172225709
TEST=build
Change-Id: I53bcc2d1e7666646ddad58ba3717cfdd321014e8
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72716
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This avoids runtime failures of lacking a RW_NVRAM section in fmap or
one having a size too small.
Change-Id: I3415bd719428a23b21210eb2176dbe15fa44eb9c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71868
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: Ib24129829bef3764a8ba1e2c0d92bc42c5cfbc8d
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I3013bd5f29f1412fbe646dc74d8946704b750a66
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
TCPA usually refers to log described by TPM 1.2 specification.
Change-Id: I896bd94f18b34d6c4b280f58b011d704df3d4022
Ticket: https://ticket.coreboot.org/issues/423
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When AP boots up after Cr50 firmware update and reboot, AP finds
that Cr50 reset is required for Cr50 to pick the new firmware so
it trigger Cr50 reset and power off the system, AP expects system
will power on automatically after Cr50 reset. However this is not
the case for Chromebox, Chromebox EC set AP_IDLE flag when system
is shutting down, when AP_IDLE flag is set in EC, the system stays
at S5/G3 and wait for power button presssend. It cause an issue in
factory that the operator needs to press power button to power on
the DUT after Cr50 firmware update.
This patch sends EC command to direct EC to clear AP_IDLE flag
after AP shutdown so AP can boot up when Cr50 reset.
BUG=b:261119366
BRANCH=firmware-brya-14505.B
TEST=DUT boots up after Cr50 firmware update in factory test flow
Change-Id: If97ffbe65f4783f17f4747a87b0bf89a2b021a3b
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70773
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a function to disable TXT as per TXT BIOS spec Section 6.2.5. AP
firmware can disable TXT if TXT fails or TPM is already enabled.
On platforms with TXT disabled, the memory can be unlocked using
MSR 0x2e6.
TEST=Able to perform disable_txt on SoC SKUs with TXT enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27f613428e82a1dd924172eab853d2ce9c32b473
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch decouples useful TXT related operations from the romstage.c
file alone and moves them into a helper txtlib.c. This effort will be
helpful for SoC users to perform TXT related operations
(like Disabling TXT) even without selecting INTEL_TXT config.
At present, those helper functions are only available upon selecting
INTEL_TXT which is not getting enabled for most of the SoC platform in
the scope of the Chromebooks.
TEST=Able to access functions from txtlib.c even without selecting
INTEL_TXT config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iff5b4e705e18cbaf181b4c71bfed368c3ed047ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Change-Id: Id57a9c689d5fa35cf1b4df9c37b12dd95cb9ef23
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2af3bc9bf9eaf258b9180da5fc5494b21764f379
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71518
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit d43154486d27323f64334203e9bc8baf08af6845.
From CB:68991: This causes CraterLake boot up process to die.
Investigation in progress.
Change-Id: I4a6c11b0e638a891108fe230bdaea92d5fbca020
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: siemens-bot
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
<types.h> provides <commonlib/bsd/cb_err.h>, <stdint.h> and <stddef.h>.
Change-Id: I966303336e604b1b945df77e5d4c3cccbf045c56
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
It's true that vbnv_udc_enable_flag() is called after vbnv_init()
(that's why the assertion was added). However, the former is called in
the ramstage, while the latter in verstage. This means that
vbnv_initialized will be false in ramstage, which leads
to the assertion failure:
[EMERG] ASSERTION ERROR: file 'src/security/vboot/vbnv.c', line 88
Since the ctx->nvdata will be restored in ramstage (by vb2api_reinit()),
simply remove the assertion. So, the patch drops assert call from
vbnv_udc_enable_flag() function.
TEST=Verify Rex system boots to OS without assert error.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I49022155239febd5c5be5cf2c5eca2019ca61c12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Init was always followed by open and after successful initialization we
need only send-receive function, which is now returned by tis_probe on
success further reducing number of functions to export from drivers.
Change-Id: Ib4ce35ada24e3959ea1a518c29d431b4ae123809
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68991
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the temporary nvdata storage inside the vboot context is already
initialized then return immediately without reinitializing from the
backup NV storage. This allows vbnv_init to be called more than once.
Also the check to enable USB Device Controller (UDC) happens after
NVdata is initialized. Hence the nvdata in vboot context can be used
instead of reading from the backup storage again.
BUG=b:242825052
TEST=Build Skyrim BIOS image and boot to OS in Skyrim.
Change-Id: Id72709e2fc3fe6a12ee96df8df25e55cf11e50a7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
<device/mmio.h>` chain-include `<arch/mmio.h>:
https://doc.coreboot.org/contributing/coding_style.html#headers-and-includes
Also sort includes while on it.
Change-Id: Ie62e4295ce735a6ca74fbe2499b41aab2e76d506
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
CONFIG_VBOOT_CBFS_INTEGRATION images are signed differently than normal
images. futility needs to be able to tell this difference, and it parses
the `config` file included in CBFS to do this. This change codifies that
dependency in Kconfig so that nobody can accidentally break this by
turning off config file inclusion.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2b2d245b850bc65abb4e72f20b4e360312c828f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70157
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function was never called from outside of drivers and
src/drivers/pc80/tpm/tis.c was the only one doing it in a questionable
way.
tpm_vendor_cleanup() also isn't needed as one of tis_close() functions
was its only caller.
Change-Id: I9df76adfc21fca9fa1d1af7c40635ec0684ceb0f
Ticket: https://ticket.coreboot.org/issues/433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Adjust asserts to allow to store and compare (at S3 resume) hashes
without padding to maximum hash length / slot size.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: If6d46e0b58dbca86af56221b7ff2606ab2d1799a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Compilers are not optimizing-out code correctly. This patch fixes
incorrect behavior by splitting if statement and extracting code to
another function, this allowing for better code size optimization and
reduction of undefined references.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ia5330efeeb4cfd7477cf8f7f64c6abed68281e30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69761
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Ic64625bdaf8c4e9f8a5c1c22cece7f4070012da7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69903
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibd41382d0e0ef58498ac925dc9e10b54a76a798a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69800
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit doesn't add any new format options, just makes selecting
existing format explicit.
Ticket: https://ticket.coreboot.org/issues/422
Change-Id: I3903aff54e01093bc9ea75862bbf5989cc6e6c55
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Until now tcg-2.0/tss.c was just assuming certain buffer size and
hash algorithm. Change it to accept digest type, which the call sites
know.
Also drop `uint8_t *out_digest` parameter which was always `NULL`
and was handled only by tcg-1.2 code.
Change-Id: I944302b502e3424c5041b17c713a867b0fc535c4
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68745
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
This removes the dev_index argument from the google_chromeec_reboot
API. It's always set to 0, so don't bother passing it.
BUG=b:258126464
BRANCH=none
TEST=none
Change-Id: Iadc3d7c6c1e048e4b1ab8f8cec3cb8eb8db38e6a
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69373
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch introduces support signing and verification of firmware
slots using CBFS metadata hash verification method for faster initial
verification. To have complete verification, CBFS_VERIFICATION should
also be enabled, as metadata hash covers only files metadata, not their
contents.
This patch also adapts mainboards and SoCs to new vboot reset
requirements.
TEST=Google Volteer/Voxel boots with VBOOT_CBFS_INTEGRATION enabled
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I40ae01c477c4e4f7a1c90e4026a8a868ae64b5ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66909
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch groups vboot context, recovery reason and subcode saving, and
reboot calls into two handy functions:
- vboot_save_and_reboot() - save context and reboot
- vboot_fail_and_reboot() - store recovery reason and call function
above
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ie29410e8985e7cf19bd8d4cccc393b050ca1f1c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69208
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Currently build rules allow using x86 SHA extensions for all coreboot
stages when enabled. On some SoCs where verstage can run in non-x86
environment, x86 SHA extension cannot be used. Update build rules
accordingly such that x86 SHA extensions can be used in AMD SoCs. This
is particularly useful when CBFS verificiation is enabled which verifies
the hash of the CBFS file being loaded.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim. Observe that hardware acceleration
is used when a CBFS file is loaded and observe an overall improvement of
10 ms.
Change-Id: I4f388e963eb82990cda41d3880e66ad937334908
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68953
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|