summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-09-09mb/asrock/h110m: disable unused serial busesMaxim Polyakov
Disable spi0, i2c0 and i2c1 in the “SerialIoDevMode” register for the following reasons: 1. when the AMI BIOS is used, these pci devices are disabled in lspci.log; 2. there are no pads in the inteltool.log that use the functions of these buses Change-Id: I01ab10eb3fd41e81a1726805247c2b472d72287c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35070 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09mb/asrock/h110m: remove unsed i2c_voltage settingsMaxim Polyakov
The string "register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" was mistakenly taken from the Intel KBL-RVP8 devicetree.cb. Remove it, since the i2c4 bus is disabled in the "SerialIoDevMode" register Change-Id: I44ecd5c22efd66b02a2851dc14a1a95421f39a71 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-09mb/asrock/h110m: use VR_CFG_AMP() macro to set PSI thresholdMaxim Polyakov
Change-Id: Iafeb7f7689a16d3b16eb0564c4dd72919a8d1382 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-09mb/asrock/h110m: fix VR domains configurationMaxim Polyakov
1) VR domains current limit Icc max for Sky/Kaby Lake S is set based on the processor TDP [1]. Updates information about this 2) Sets VR voltage limit to 1.52V, as described in the datasheets [2,3] [1] Change-Id: I303c5dc8ed03e9a98a834a2acfb400022dfc2fde [2] page 112-119, 6th Generation Intel(R) Processor Families for S-Platforms, Volume 1 of 2, Datasheet, August 2018. Document Number: 332687-008EN [3] 7th Generation Intel(R) Processor Families for S Platforms and Intel(R) Core(TM) X-Series Processor Family Datasheet, Volume 1, December 2018, Document Number: 335195-003 Change-Id: I6e1aefde135ffce75a5d837348595aa20aff0513 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-06mb/google/hatch/variants/helios: Update DPTF parameters and TDP PL1/PL2Frank_Chu
Applying first tuned DPTF parameters and TDP PL1/PL2 values for helios. BUG=b:138752455 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ic7a96c33ce710c32b57e2ad8066830ff83398c57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-09-05mb/google/octopus: Set sar file name for meep skuWisley Chen
Set meep sar file name by sku number Cq-Depend: chromium:1768380 BUG=b:138261454, b:118782854 BRANCH=octopus TEST=emerge-octopus coreboot, and check wifi_sar-meep.hex Change-Id: I25aa3080392ce277e537c973088dde569246630e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-05mb/google/drallion: modify PCIE settingEric Lai
Based on HW schematic to modify PCIE setting. BUG=b:138082886 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia744a6f3cba76c507c1c43b0a981cb6d89c1a40f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-05mb/google/octopus: Load custom SAR values by SKU ID for BloogTony Huang
Use sku-id to load the SAR values for Bloog device. BUG=b:138180187 BRANCH=octopus TEST=build and verify load Bloog SAR by sku-id Cq-Depend: chromium:1771477 Change-Id: Id0bc2609fd1c4eaeb380f8f1532ab30d34e2aeb3 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-05mb/siemens/mc_apl5: Disable IGD if no EDID data availableMario Scheithauer
To avoid possible panel failures due to incorrect timing settings for PTN3460, the internal graphic device should be disabled. Change-Id: Ie0b9ed99fb78461bb48d6f2ff328643cd8c2cd15 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-04mb/google/kahlee/treeya: Update the memory timing table for Treeya to the 2T ↵Peichao Wang
table Rename the table from Liara specific to simply specifying that it's using 2T command rate BUG=139841929 TEST=build and do stress test Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6e10b95c8aea50e68d8a3b710f30dda4f6b807d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-04mb/google/kahlee/treeya: override sku_id() functionPeichao Wang
override 'uint32_t sku_id(void)' so that lib_sysinfo.sku_id get a correct value in depthcharge BUG=b:140010592 BRANCH=none TEST=boot treeya board, in depthcharge stage, lib_sysinfo.sku_id print correct value. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I631f62021e8104a69a43667a811c9c23e3105596 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Magf - <magf@bitland.corp-partner.google.com> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-04mb/google/hatch/var/kindred: Update DPTF parameters and TDP PL1/PL2David Wu
Add TEMP_SENSOR_3 to DPTF, Update DPTF parameters and TDP PL1/PL2 values Cq-Depend: chromium:1751304 BUG=b:140127035 TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-ec chromeos-bootimage Change-Id: I1817e277f4641db6bedc8b640b1dc5d57502d5dd Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-09-04mainboard/amd: Add padmelon board codeRichard Spiegel
Padmelon board code was written for Merlin Falcon (family 15h models 60h-6fh), but as the needed binaries are not yet merged (commit 33615), a config HAVE_MERLINFALCON_BINARIES was added. If the binaries are not available, the board defaults to Prairie Falcon, which use the same binaries as Stoney Ridge. Once the binaries are merged, the config will be eliminated. Fan control is done through F81803A SIO, and IRQ/GPIO and other board characteristics are the same regardless of Merlin Falcon or Prairie Falcon. Padmelon board was created to accept Prairie Falcon, Brown Falcon and Merlin Falcon. The requested development was for Merlin Falcon. There are some small spec changes (such as number of memory channels) between SOCs. Brown Falcon was not investigated, Prairie Falcon is very similar to Stoney Ridge. Started from Gardenia code, added changes created by Marc Jones and finally revised against schematic, which added changes to GPIO settings. BUG=none. TEST=Both versions tested and boot to Linux using SeaBIOS. Change-Id: I5a366ddeb4cfebd177a8744f6edb87aecd4787dd Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-03mb/google/hatch/var/kindred: Update DRAM IDs for 8G and 16G 3200David Wu
Update DRAM IDs to support 8G and 16G 3200 spds BUG=b:132920013 b:131132486 TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage Change-Id: I8e55b5e24ee2cefe90472a331e829b073bf0f92a Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-02mb/facebook/watson: Select no UART on SuperIOPatrick Rudolph
Select NO_UART_ON_SUPERIO as the SoC internal UART is used. The current code is working, so this is just a cosmetic fix to remove some unused options from Kconfig. Change-Id: I206557c397da74b572e669feb1e38f0c8473d0d9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35151 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mb/google/drallion: add memory sku idEric Lai
Drallion will use soldered down memory and use GPP_F12 to GPP_F16 indicates mem_id. BUG=b:139397313 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib5ada54fd2b8f358b59de8089e5405cf3e34825a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-02mb/google/drallion: Enable HDA for drallion platformAamir Bohra
Enable PchHdaIDispCodecDisconnect and PchHdaAudioLinkHda for drallion variants. This is needed with FSP 1263. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I13d3dd832c6fbdc2aad5ba578695edb8470806e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-02arch/ppc64: move misc.c to qemu-power8 as timer.cMarty E. Plummer
Its entirely no-op and is getting in the way of real hardware timers for power9/talos ii. Change-Id: I2d21d4ac3d1a7d3f099ed6ec4faf10079b1ee1d1 Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35082 Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mb/google/hatch/var/helios: Increase touchscreen reset delay to 120msPhilip Chen
As per GT7375P programming guide rev0.4, we want to enforce a delay of 120ms after the reset is completed, before HID_I2C starts. BUG=b:140276418 Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Id69a9db996bcd9001ef850c50898fbd55327b4df Reviewed-on: https://review.coreboot.org/c/coreboot/+/35158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-02mb/ocp/monolake: use VPD data to configure FSP UPDJonathan Zhang
Summary: This patch calls monolake board specific function to query settings stored in VPD binary blob to configure FSP UPD variable HyperThreading. Test Plan: * Build an OCP MonoLake coreboot image, run following command to initialize RW_VPD and insert HyperThreading key: vpd -f build/coreboot.rom -O -i RW_VPD -s 'HyperThreading=0' * Flash the image to MonoLake, boot and observe following message in boot log: Detected 16 CPU threads If RW_VPD partition does not exist, or if HyperThreading key/value pair does not exist, the boot log has: Detected 32 CPU threads Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I799d27734fe4b67cd1f40cae710151a01562b1b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-02mb/*: Use common IPMI KCS driverPatrick Rudolph
Remove duplicated code and instead use the IPMI KCS driver, which provides the same functionality. Change-Id: I419713c9bef02084cca1ff4cf11c33c2e3e8d3c1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com>
2019-09-01mb/asrock/h110m: rewrite gpio config using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 [1] registers values from the inteltool dump, is more understandable and makes the code much cleaner. The pad configuration in this patch was generated using the pch-pads-parser utility [2]. The inteltool dump before and after the patch is identical (see notes) Notes: 1. For some reason, GPIO RX State (RO) for the GPP_F4 and GPP_G10 changed the value to 0, but this doesn't affect the motherboard operation. Perhaps this is because PAD_CFG1_GPIO_DRIVER is set to PAD_CFG_GPI_INT(), and the pad is not actually connected. So far I haven't circuit diagram to check this out. 2. According to the documentation [1], the value 3h for RXEVCFG is implemented as setting 0h. 3. If the available macros from gpio_defs.h [3] can't determine the configuration of the pad, the utility [2] generates common _PAD_CFG_STRUCT() macros [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN [2] https://github.com/maxpoliak/pch-pads-parser/tree/stable_1.0 [3] src/soc/intel/common/block/include/intelblocks/gpio_defs.h Change-Id: I01ad4bd29235fbe2b23abce5fbaaa7e63c87f529 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-01mb/supermicro/x11ssh: Add Supermicro X11SSH-TFChristian Walter
Add support for the X11SSH-TF which is based on Intel KBL. Working: * SeaBIOS payload * LinuxBoot payload * IPMI of BMC * PCIe, SATA, USB and M.2 ports * RS232 serial * Native graphics init Not working: * TianoCore doesn't work yet as the Aspeed NGI is text mode only. * Intel SGX, due to random crashes in soc/intel/common For more details have a look at the documentation. Please apply those patches as well for good user experience: Ica0c20255f661dd61edc3a7d15646b7447c4658e Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Felix Singer <felix.singer@9elements.com> Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-30mb/google/octopus/variants/garg: update new SKUKevin Chiu
For Garg EVT build, add new SKU ID below: SKU4 LTE DB, touch: SKU ID - 18 SKU5,6 Convertible, 2A2C, Touch, Stylus, rear camera: SKU ID - 37 BUG=b:134854577 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Iea1d17efb9a5f274f8eefb2aaa683e75ab5de7d2 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-08-30mb/google/kahlee/variants/careena: override DRAM SPD tableKevin Chiu
override DRAM SPD and add new 4 DRAM: Samsung (TH) K4AAG165WA-BCTD Hynix (TG) H5ANAG6NCMR-XNC Micron (TF) MT40A1G16RC-062E:B Samsung (TH) K4AAG165WA-BCWE BUG=b:139912383 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage extract spd.bin and confirm 4 new SPD was added. Change-Id: Ie1b2c1bae5ffe9f3a6a6560348f6e1b117ffd457 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-30google/buddy: adjust CID for realtek audio codecMatt DeVillier
Adjust CID to allow for Windows driver to attach without breaking functionality under Linux. Same change made as to google/cyan (which uses same Realtek RT5650 codec) in commit 607d72b. Test: build/boot Windowns 10 on google/buddy, observe audio drivers correctly attached to codec and Intel SST devices. Change-Id: I839acc8427ee9b5c425885858a513e9b0b9d0f93 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30mb/google/drallion: change servo board debug to UART 0Eric Lai
Drallion will change debug port UART from 2 to 0. Followed HW schematic to modify it. BUG=b:139095062 BRANCH=N/A TEST=Build without error Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib2bcded8de3c9fb2c0a4ccbd002b1f219bccceb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-30mb/google/hatch: Add settings for noise mitgationDtrain Hsu
Enable acoustic noise mitgation for hatch platform, the slow slew rates are fast time dived by 8 and disable Fast PKG C State Ramp(IA, GT, SA). BUG=b:131779678 TEST=waveform test and reduce the noise level. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I49e834825b3f1e5bf02f9523d7caa93b544c9d17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-30mb/google/hatch: Add 16G 3200 generic SPD fileShelley Chen
BUG=b:139792883 BRANCH=None TEST=None Change-Id: I22974b015a40fb7ae592e182cf5da83a8252c031 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-08-29arch/arm: Make ARM stages select ARCH_ARMArthur Heymans
This removes the need to select ARCH_ARM in SOC Kconfig Also don't define the default as this result in spurious lines in the .config. Change-Id: I1ed4a71599641db606510e5304b9f0acf9b7eb88 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31313 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-29mb/google/drallion: Update memory mapBernardo Perez Priego
This will enable to optionally inject ISH binaries into coreboot. BUG:b:139820063 TEST='compile successfully' Change-Id: I38659460726a3f647cda3bc3efd442f18aea24f0 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-29mb/google/drallion: Correct drallion HWID and add HWID for variantsMathew King
The current HWID for drallion is reported as invalid by chrome, generate new valid HWID with the following command and taking last 4 digits. `printf "%d\n" 0x$(crc32 <(echo -n '$1'))` BUG=b:140013681 Change-Id: I410d37fc3f3372e9420d674b65f2c9a704b670f2 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-28google/rambi,intel/baytrail: Simplified romstage flowKyösti Mälkki
Change-Id: I99440539d7b7586df66395776dcd0b4f72f66818 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34964 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28mb/google/hatch/variants: Increase touchscreen reset delay to 120msSumeet Pawnikar
During boot sequence sometime touchscreen reset keeps failing. Also, kernel dmesg shows "dmesg:i2c_hid i2c-GDIX0000:00: failed to reset device" message. This adds around 4 more seconds to the boot sequence. Setting the appropriate delay of 120ms between enable and reset for Goodix Touchscreen helps to synchronize and address this failure. This value is 120 ms as per Goodix Spec. BUG=b:138413748 BRANCH=None TEST=Built and tested on Hatch system Change-Id: I15005c568f285ec7bad9a0bec4498e2fdd20782b Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34626 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28google/leon: Add DRIVERS_I2C_RTD2132Kyösti Mälkki
This is LVDS bridge, I assume this was lost while upstreaming or converting boards to variants. Change-Id: I816a6b4035c4e935150cc77089c4224eee719c10 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-08-28lenovo/t431s,w530: Add DRIVERS_RICOH_RCE822Kyösti Mälkki
Device is present in devicetree but not included in the build. Change-Id: I8555d94902e94c623d8fbe6f1a4ffe7637988530 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-28mb/google/hatch: Enable Override DLLs for KindredJamie Chen
Enable SOC_INTEL_COMMON_MMC_OVERRIDE for Kindred BUG=b:136784418 BRANCH=none TEST=Boot to OS 100 times on Kindred proto 1 board. Change-Id: I390d237b9119ae42f4b0bb802bf9857552af78bf Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-28mb/google/hatch: Override DLL values for KindredJamie Chen
New emmc DLL values for Kindred BUG=b:136784418 BRANCH=none TEST=Boot to OS 100 times on Kindred proto 1 board. Change-Id: I52acb445c47fcdb9b60512dd501d810b1ae4dc10 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35041 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28mb/google/drallion: remove GBE fileEric Lai
Drallion doesn't have on board LAN, remove GBE bin file config. BUG=b:139906731 TEST=emerge-drallion coreboot chromeos-bootimage and check image-drallion.bin not include GBE region Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifbc295afd8d875b5098b0ce75252b51523a5c76e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-28mb/google/drallion: add dummy SPD fileEric Lai
Drallion will use soldered down memory. Add dummy spd file. BUG=b:139397313 BRANCH=N/A TEST=Build and check cbfs has the dummy spd.bin Change-Id: Ife59c2dd689d72b117f30e832a3ce7eed4fa4220 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35113 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28mb/google/poppy/variant/nami: add sku ids of bard/ekkoRen Kuo
add sku ids of bard/ekko BUG=b:139886622 TEST=emerge-nami coreboot Change-Id: Iabc3d587c3839e4a3121cea8504c50e2dc4f9699 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35115 Reviewed-by: Vincent Wang <vwang@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27smsc/superio/sio1007: Fix header nameKyösti Mälkki
The file chip.h has a special purpose for defining the configuration structure used in static devicetree. Change-Id: If0289c29ca72768009c1b7166311bc4c3cee4171 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-08-26emulation/qemu-x86: Rename memory.c to memmap.cKyösti Mälkki
Change-Id: I311423cb565485236f89bd6043155aaf6296a031 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34974 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26emulation/qemu-x86: Use common romstage codeKyösti Mälkki
This provides stack guards with checking and common entry into postcar. Change-Id: If0729721f0165187946107eb98e8bc754f28e517 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34973 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26soc/intel: Use common romstage codeKyösti Mälkki
This provides stack guards with checking and common entry into postcar. The code in cpu/intel/car/romstage.c is candidate for becoming architectural so function prototype is moved to <arch/romstage.h>. Change-Id: I4c5a9789e7cf3f7f49a4a33e21dac894320a9639 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26Split MAYBE_STATIC to _BSS and _NONZERO variantsKyösti Mälkki
These are required to cover the absensce of .data and .bss sections in some programs, most notably ARCH_X86 in execute-in-place with cache-as-ram. Change-Id: I80485ebac94b88c5864a949b17ad1dccdfda6a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26mb/scaleway/tagada: Remove use of car_get_var()Kyösti Mälkki
Board has CAR_GLOBAL_MIGRATION=n and can use .bss for a variable that was previously declared with CAR_GLOBAL. Test for !defined(__PRE_RAM__) can be transformed into ENV_RAMSTAGE here as the warnings about invalid bmcinfo structure do not need to be repeated in SMM console, which is generally disabled anyways due to DEBUG_SMI=n. Change-Id: I6b63213484107fa0eeb0d952d8766916b44a3c4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-26google/kukui: Enable CHROMEOS_USE_EC_WATCHDOG_FLAGYu-Ping Wu
Kukui AP doesn't remember if the last AP reset was due to AP watchdog. We need to enable CHROMEOS_USE_EC_WATCHDOG_FLAG so that it will query the reset reason from EC. BUG=b:109900671,b:118654976 BRANCH=none TEST=1. run 'mosys eventlog clear; stop daisydog; echo > /dev/watchdog' 2. wait for watchdog reset 3. check 'mosys eventlog list | grep watchdog' Change-Id: I053cc7664bbaf0d3fcae26ba9481a0ad700dca90 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-26mb/facebook/fbg1701/data.vbt: Correct EFP1 configurationFrans Hendriks
EFP1 is configured as 'DisplayPort with HDMI/DVI compatibility'. Using this setting 4K monitor is configured into lower resolution. Change EFP1 setting to 'HDMI/DVI' The next addtional small changes are made in VBT: UEFI GOP Driver Child Device 2 = LFP Child Device 3 = EFP1/LFP LFP Panel configuration Y-Res of Panel #10 = 1920 BUG=N/A TEST=LCD and HDMI on Facebook FBG1701 Change-Id: Idc694b15ff94b83291a8c8252e269b7e6d96f87b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35043 Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26google/link: fix detection of dimm on channel 1Matt DeVillier
Changes to the sandybridge memory init code (both MRC and native) now require SPD data on all populated channels in order for dimms to be detected properly, so copy spd_data[0] to spd_data[2], as LINK always has 2 channels of memory down. Test: boot google/link, observe onboard RAM correctly detected on both channels Change-Id: Id01d57d5e5f928dfc1cd9063ab1625c440ef2bbe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-08-26mainboard/emulation/qemu-aarch64: Update DRAM_SIZE_MBAsami Doi
DRAM_SIZE_MB should be the maximum size (255GiB / -m 261120M) that’s possible with QEMU on AArch64 virt because it tries to search the DRAM_SIZE_MB range to find the true memory size. Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Change-Id: Id479c0b18d1e1adceecdcca13e36119b95617e6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/35024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-08-24mb/google/octopus: Re-assign sku number for vortininjaWisley Chen
Re-assign sku number for vortininja. BuG=b:138177049 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I3166a635151fcc7b2e3c0122fa05925cfa5df7d0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-23mb/google/hatch/var/kindred:: Add enable signal for touch screenPhilip Chen
In the next board version, we will use GPP_D9 as enable control for touch screen. BUG=b:137133946 TEST=build Change-Id: I213d0878bfca1ce4059ec0393f59d8e79e1b274c Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-23mb/google/hatch/variants/kindred: Remove unused devicesPhilip Chen
sx9310 and FPMCU are not used in Kindred. BUG=none TEST=build Change-Id: Ied09d4bdb899d991131a75d7c848ff8637022f53 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-23mb/google/rambi: update GPIO, RAM config for clapperMatt DeVillier
When upstreamed, GPIO and RAM config for clapper variant was taken from an older branch, leading some boards to fail to boot. Update based on chromium branch firmware-clapper-5216.199.B, commit 362d845 [baytrail: implement baytrail technical advisory 556192] Change-Id: I099ee2cd0833e4b9ab093663c4549c79ec044127 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-23Revert "mb/google/octopus: Disable WLAN prior the entry of S5"Kane Chen
This reverts commit 38dbd6892080c93ccd24fbfa46ed5d9bdb7d9e99. Reason for revert: ODM helped to verify w/ BT runtime suspend disabled + revert this change And issue is gone. so I revert this change see the test result in https://partnerissuetracker.corp.google.com/issues/136039607#comment32 Change-Id: I248e9613cc39247a2bb88270c234c7d36d0ff60f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-08-23mb/google/drallion: Add two variants - arcada_cml & sarien_cmlThejaswani Putta
These variants are to support the sarien and arcada boards with CML SOC, the drallion variant will be used to support the upcoming drallion board. Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I766bdccb6f8b6924d6ae1abbe57035f4ff1f6f17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-23mb/google/kukui: Add panel for KodamaPeichao Wang
Declare the following panel for Kodama: - AUO B101UAN08.3 BUG=b:139699622 TEST=builds Kodama image and working properly Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I3f688ffd0ece6afac08d353ab5a6cf1cf876b32f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35001 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22mb/google/kukui: Add flapjack panelsHung-Te Lin
Add panels supported by flapjack. Change-Id: I547bf6f26bdbfed52a00c8cfb268d4e7c17ed889 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-22arch/x86: Add <arch/romstage.h>Kyösti Mälkki
Start with moving all postcar_frame related function declarations here from <arch/cpu.h>. Change-Id: I9aeef07f9009e44cc08927c85fe1862edf5c70dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34911 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21mb/google/kukui: Move panel description to CBFS filesHung-Te Lin
The panel description may be pretty large (for example, 1.3k for BOE TV101) due to init commands and we should only load the right config when display is needed. BUG=None TEST=make -j; boots and see display on Krane. Change-Id: I2560a11ecf7badfd0605ab189d57ec9456850f75 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21mediatek/mt8183: add scp voltage initializationHsin-Hsiung Wang
Add scp voltage initialization. BUG=b:135985700 BRANCH=none Test=Boots correctly on Kukui and scp can boot up normally Change-Id: I5afb60af3c14490e20f28f1c089cfca42ddf7fcf Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-21arch/x86: Rename some mainboard_romstage_entry()Kyösti Mälkki
These platforms use different signature for this function, so declare them with different name to make room in global namespace. Change-Id: I77be9099bf20e00ae6770e9ffe12301eda028819 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34909 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21AMD fam10: Remove HAVE_ACPI_RESUME supportKyösti Mälkki
Change-Id: I62bbba8cfe515b3cae413582ff8d062a20e6741b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/15474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-21mb/google/kohaku: Correct DPTF temp sensor IDsSeunghwan Kim
This change corrects DPTF temperature sensor IDs BUG=none BRANCH=none TEST=none Change-Id: I25c76b0e938b2568da1833a4a5685ed36c00275e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21mb/google/octopus/variants/bloog: Add G2Touch touchscreen supportTony Huang
Add G2Touch touchscreen support for blooglet. BUG=b:139725457 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen by evtest. Change-Id: I6ebcc60f58857d8b28446932787742c2740fadd8 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21mb/google/kahlee/treeya: Update Raydium TS device ACPI nodesChris Wang
Update I2C irq to EDGE trigger for Raydium TS. BUG=b:135551210 BRANCH=master TEST=emerge-grunt coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ic0a00a31eefa756b6e4ee9aac8d25c1be5ac9195 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-21mb/google/kahlee/treeya: remove keyboard backlight supportChris Wang
Treeya doesn't support the keyboard backlight. BUG=b:135551210 BRANCH=grunt TEST=emerge-grunt coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I02dfc77d3cb7ac00b3f10d577d92775db99c1bdf Reviewed-on: https://review.coreboot.org/c/coreboot/+/34903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2019-08-21mb/google/kahlee/treeya: Use GPIO_10 for EC_SYNC_IRQChris Wang
Use AGPIO 10 as the EC sync interrupt for MKBP events for sensor data. Reference to Aleena project. BUG=b:135551210 BRANCH=grunt TEST=emerge-grunt coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ie0b719ebce90710bca2109b7ff255e19329f9cac Reviewed-on: https://review.coreboot.org/c/coreboot/+/34902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2019-08-21mb/google/kahlee/treeya: Add EC_ENABLE_TBMC_DEVICEChris Wang
Enable ACPI TBMC notification on tablet mode change to support convertible treeya devices. BUG=b:135551210 BRANCH=grunt TEST=emerge-grunt coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Id0618c8df66267b88008dc5057892de6b530629f Reviewed-on: https://review.coreboot.org/c/coreboot/+/34899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2019-08-21mb/google/kahlee/treeya: Enable Synaptics touchpad andPeichao Wang
Synaptics touchscreen BUG=b:139699619 TEST=emerge-grunt coreboot chromeos-bootimage flash bios image to DUT and make sure the touchpad and touchscreen can work Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I002badd49e678e1c32c802352923ca51efb45cef Reviewed-on: https://review.coreboot.org/c/coreboot/+/35000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-20mb/ocp/monolake: Add IPMI CMOS clear supportJohnny Lin
coreboot would clear CMOS by request via IPMI command, for example BMC can issue "bios-util server --boot_order enable --clear_CMOS" to set the request and reboot the system, then coreboot would clear CMOS on the next boot. Tested on Mono Lake Change-Id: I21d44557896680cfac3c3b6d83e07b755b242cad Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34857 Reviewed-by: Johnny Lin Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20mb/google/hatch: Skip SD card controller WP pin configuration from FSPAamir Bohra
BUG=b:123907904 TEST=SD WP GPIO PAD retains coreboot configuration and FSP ScsSdCardWpPinEnabled UPD is set to 0. Change-Id: I30367cda09cc8c88abb649f70b4587889083f9af Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34901 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20mb,autoport: Fix GCC 9 Port_List build errorJacob Garber
Port_List is an array of 8 elements, and GCC 9 is warning that there are no 'others' when all 8 elements are explicitly initialized, which is causing the build to fail. Remove the 'others => Disabled' clause to silence this. Change-Id: Id082e7a76641438f3fb4c4d976dbd254a7053473 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34918 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20mb/amd/serengeti_cheetah_fam10: Add null pointer checkJacob Garber
Print an error message and die if the PCI device cannot be found. Change-Id: I10c58502658ebf12d1a8fe826ee7d47a618fd1c8 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1403000 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-20mb/{asrock,intel,purism}: Copy channel arrays separatelyJacob Garber
DqByteMapCh0 and DqByteMapCh1 are declared adjacently in the FSP_M_CONFIG struct, so it is tempting to begin memcpy at the address of the first array and overwrite both of them at once. However, FSP_M_CONFIG is not declared with the packed attribute, so this is not guaranteed to work and is undefined behaviour to boot. It is cleaner and less tricky to copy them independently. The same is true for DqsMapCpu2DramCh0 and DqsMapCpu2DramCh1, so we change those as well. Change-Id: Ic6bb2bd5773af24329575926dbc70e0211f29051 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 136538{8,9}, 140134{1,4} Reviewed-on: https://review.coreboot.org/c/coreboot/+/33135 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20mb/google/{eve,glados}: Copy channel arrays separatelyJacob Garber
DqByteMapCh0 and DqByteMapCh1 are declared adjacently in the FSP_M_CONFIG struct, so it is tempting to begin memcpy at the address of the first array and overwrite both of them at once. However, FSP_M_CONFIG is not declared with the packed attribute, so this is not guaranteed to work and is undefined behaviour to boot. It is cleaner and less tricky to copy them independently. The same is true for DqsMapCpu2DramCh0 and DqsMapCpu2DramCh1, so we change those as well. Change-Id: If394f14c4a39d6787ae31868241229646c26be7a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1365730, 14013{38,39,40,42,43} Reviewed-on: https://review.coreboot.org/c/coreboot/+/33066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-20mb/asus/kfsn4-dre: Return early if CK804 not foundJacob Garber
It probably doesn't make sense to continue if the CK804 isn't found, and doing so would perform uninitialized reads of the busn and io_base arrays anyway, so let's return early. Change-Id: I13c663314496caf51a57da7f27f9ea24e3d7fcbd Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1370586 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-20AGESA,binaryPI: Replace use of __PRE_RAM__Kyösti Mälkki
Change-Id: Id878fd33ec3d2de640d9a488058a805be3ccd223 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-20mb/google/kohaku: Use level trigger for touchscreen interruptSeunghwan Kim
Level trigger is recommended setting for touchscreen interrupt of kohaku, so we would change it as the recommedation. BUG=b:139179200 BRANCH=none TEST=Verified touchscreen works on kohaku Change-Id: Ibbcdbe3ab555d014048f66ff527e539c5b566187 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-20google/stout: Use MAYBE_STATICKyösti Mälkki
Change-Id: I11027acb11a4656536384134d0caebd14b63770c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-20google/butterfly: Replace use of __PRE_RAM__Kyösti Mälkki
Change-Id: Iae944b589d587b30826e935feae029aa8d07d5d9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-20arch/non-x86: Remove use of __PRE_RAM__Kyösti Mälkki
Change-Id: Id8918f40572497b068509b5d5a490de0435ad50b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-19google/rambi: Replace __PRE_RAM__ with ENV_ROMSTAGEKyösti Mälkki
Change-Id: I9d86f8475221b52ccdb45cdeaf538e85ab7a17c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-19mainboard/google: Remove use of __PRE_RAM__Kyösti Mälkki
Change-Id: I2ebeb393e4a5a4bfac8a37a877d067aca484ca2e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-18cpu/intel: Enter romstage without BISTKyösti Mälkki
When entry to romstage is via cpu/intel/car/romstage.c BIST has not been passed down the path for sometime. Change-Id: I345975c53014902269cee21fc393331d33a84dce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-18mainboards: Remove floating __PRE_RAM__ commentsKyösti Mälkki
Change-Id: I110e54175a81b6a651213e0f18ddc1e3e71160cf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-16mediatek/mt8183: Add SAMSUNG 4GB LPDDR4X discrete DDR supportHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly and stress test passes on Kukui. Change-Id: I27164f0909edb9d9398835e292fb845f0e342391 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34532 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-16mb/google/hatch: Create Akemi variantPeichao Wang
This is based on the hatch variant BUG=b:138879565 TEST=FW_NAME="akemi" emerge-hatch coreboot depthcharge intel-cmlfsp chromeos-bootimage look for image-akemi.*.bin generated under the /build/hatch/firmware/ Change-Id: I1a868839e2c598f8052d37c99713bc58b21e887c Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-15mb/google/hatch/var/kindred: Configure GPIOs for eMMC SKUsDavid Wu
Configure GPIOs for eMMC SKUs BUG=b:132918661 TEST=Verify SSD is disabled when SKU ID = 2/4/21/22 Change-Id: I9f678a40555dbc841487811cc1f680b211a51a89 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-08-15mb/google/hatch/var/kindred: Disable SATA controller for eMMC SKUsDavid Wu
Disable SATA controller and SATA port 1 for eMMC SKUs BUG=b:132918661 TEST=Verify SSD is disabled when SKU ID = 2/4/21/22 Change-Id: I6d95ff94b079a564f74c19739370101899843f00 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34789 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/hatch/var/kindred: Configure GPIOs for SSD SKUsDavid Wu
Configure GPIOs for SSD SKUs BUG=b:132918661 TEST=Verify eMMC is disabled when SKU ID = 1/3/23/24 Change-Id: Ief48a2fd2fa078aa5d89aec01f99af75510334b2 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34851 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/hatch/var/kindred: Disable eMMC for new SKU ID 23 and 24David Wu
1. Disable eMMC controller for new SKU ID 23 and 24 2. Disable HS400 mode BUG=b:132918661 TEST=Verify eMMC is disabled when SKU ID = 1/3/23/24 Change-Id: I0d893f0f7339e7b1a1e6b56d1598c0a361c8d604 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-08-15cpu/x86/smm: Promote smm_memory_map()Kyösti Mälkki
Change-Id: I909e9b5fead317928d3513a677cfab25e3c42f64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mainboard/google: Fix indirect includesKyösti Mälkki
Change-Id: Ie79702efab519b16cff45ccad61b95e7d8c2fbac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34854 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/kukui: Report panel manufacturer nameHung-Te Lin
The src/lib/edid now supports reporting manufacturer name so we should define that in MIPI panels and print out in initialization. BUG=None TEST=emerge-kukui coreboot; boots properly Change-Id: If844da84ecca31307127b14c66bbe17c408699f3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-15soc/mediatek: Change DSI init commands to take flexible length arrayHung-Te Lin
The fixed size of init command in lcm_init_table is wasting lots of space and we should change to packed array since the command buffer already provides length information. With this change, BOE panel init commands have been reduced from 4848 bytes to 1309 bytes. BUG=b:80501386,b:117254947 TEST=emerge-kukui coreboot chromeos-bootimage; Boots properly Change-Id: I359dde8e6f2e1c0983f4677193bb47a7ae497ca6 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34778 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/kukui: Support eDP panels via PS8640Hung-Te Lin
Some Kukui variants may have eDP panels connected via a PS8640 MIPI bridge which we may retrieve EDID dynamically. BUG=b:b:137517228 TEST=emerge-jacuzzi coreboot chromeos-bootimage; boots and see display. Change-Id: I85aac5255e6a3e6019299670486214ecffbf9801 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34516 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/kukui: Add panel for KodamaPeichao Wang
Declare the following panel for Kodama: - BOE TV101WUM-N53 BUG=b:138156559 TEST=builds Kodama image and working properly Change-Id: I129cb6bf084b76da3ad33b7a19e38e884442b1aa Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34505 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-15mb/google/kukui: Add panel for KukuiHung-Te Lin
Support Kukui rev 2 panel (via SSD2858). BUG=b:129299873 BRANCH=none TEST=Build as Kukui and boots on Rev 2 unit. Change-Id: Icc16c4297eb3c6b6a4770a36661a2e3cab418048 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 22:03:33 +0000