| Age | Commit message (Collapse) | Author |
|---|
|
This is added at runtime.
Change-Id: I7716f8a972e2280179aa6aee00488b22413c0c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69298
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
C5, C6 and slfm depend on the southbridge and the northbridge to be able
to provide this functionality, with some just lacking the possibility to
do so. Move the devicetree configuration to the southbridge.
This removes the need for a magic lapic in the devicetree.
Change-Id: I4a9b1e684a7927259adae9b1d42a67e907722109
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Zork boards will not boot without PSP verstage/VBOOT, so select it
by default.
Change-Id: I2447bf69baefd5560a0153dcd3d9b87b0a91a3f9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69763
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds PCIe based SD controller at RP 7 (from RP 11) with
Proto 1 schematics dated 11/30.
Additionally, added the RTD3 entries for the SD controller.
Finally, ensured that EN_PP3300_SD (GPP_D03) is configured in
bootblock and SD_PERST_L (GPP_D02) is configured in romstage to
meet the power cycle requirement.
BUG=b:242917011
TEST=Able to build and boot Google/Rex. SD card detection is due
for the Proto 1 hardware.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23d53e4d61ec36d2145f9e5816d97d13eb5b219e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70064
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This patch drops the usage of reading `board_id()` while performing
the GPIO configuration.
The reason to drop the board_id check is to ensure that GPIO
configuration for MLB (mainboard) would remain the same and the only
GPIO PIN configuration that differs would be due to usage of having
different DBs (daughter board) which will be taken care using
CBI (and fw_config.c file) in coreboot.
Additionally, drop unused early GPIO default configuration table.
BUG=b:260804656
TEST=Able to perform the GPIO configuration and able to boot
Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I96cafd1c904001cbf4199977e9e721afe5eab470
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Enable this feature, and it can use the probe statement in devicetree
to cache of fw_config field as oem string.
TEST=With CBI FW_CONFIG field set to 0x1561
localhost ~ # dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: AUDIO-MAX98357_ALC5682I_I2S
String 2: CELLULAR-CELLULAR_PCIE
String 3: UFC-UFC_MIPI
String 4: WFC-WFC_MIPI
String 5: DB_SD-SD_GL9755S
Change-Id: I6cb35eb9c0fbe32764ca76bb7a929cc92fc38404
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70228
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
NVMe is determined by a logical bit 1, not the physical SKU pin.
Thus, (logical) sku_id & 0x2 == 0x2 would mean that the device has
NVMe enabled on it. Previously, I thought that it was tied to a
physical pin, but this is not correct.
BUG=b:254281839
BRANCH=None
TEST=flash and boot on villager and make sure that NVMe is not
initialized in coreboot.
Change-Id: Iaa75d2418d6a2351d874842e8678bd6ad3c92526
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70230
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ied55add6d7549f165d8b97032d7f21ede0ce2dde
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Fixes using USB-C devices in either orientation on left-side USB-C
port.
Test: Plug USB-C device in both orientations on left-side USB-C port,
check speed with lsusb -t.
Change-Id: I9fbc53bb51a5225e92b0b6bb9ced87a0ab90c9ce
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69702
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add WiFi SAR table for zydron.
BUG=b:260770999
TEST=build FW and checked SAR table can load by WiFi driver.
Change-Id: I8d5f966c7af3ac6d9923d4f6c851bfb340f31fab
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Per Intel doc 621483, 26.1.1 - NMI_STS_CNT, 8254 timer is required
for Speaker Data output (buzzer) at GPP_B14 NF1, as it is using
8254 timer counter 2 output. However when 8254 timer is used, S0ix
will not work as 8254 has to be gated instead. For further info on
s0ix requirements, refer to Intel doc 610002 (Modern Standby Unified
Checklist).
This CL also disables s0ix because it is not required by the
platform.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Ib5e7787a47509ed09818d8515d21a80196fb1ec6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67553
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update VBT configurations for DP++ and DP dongles support.
Tested working on customer's side.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I7aa34297a10bf16b9043140bff91fd3a8c4009d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70154
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5f11bde99dfcde81c9dc62c1102330c0a6c16e04
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ia71692ecf74fd8921eeafabac9a4cb862da90e81
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70114
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
"use_crt" and "use_lvds" are boolean, so use "true/false".
Change-Id: I5b5b42c27351331ad40fbe92fb87390cb1284aa9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70148
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After changing EC detection of S0ix from CPU_C10_GATE# to SLP_S0# in
system76/ec@cc3effb6a451 ("board/system76/common: use SLP_S0# pin for
modern standby detection"), DevSlp blocks suspend entry. Disable it
until it is fixed.
Change-Id: I586245ebf9f9d5ad08f6745a450411f194a661da
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The Galago Pro 6 (galp6) is an Alder Lake-P board.
Tested with a custom edk2 UefiPayloadPkg.
Working:
- PS/2 keyboard, touchpad
- Both DIMM slots (with NMSO480E82-3200EA00)
- M.2 NVMe SSD (with MZVL2500HCJQ)
- All USB ports
- All USB ports
- SD card reader
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- Backlight controls on Windows 10 and Linux 6.1
- HDMI output
- DisplayPort output over USB-C
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio
- S0ix suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.0.6
- Internal flashing with flashrom v1.2-1087-gde016a17
Not working:
- Detection of devices in TBT slot on boot
Change-Id: I8940fb3777d7f18393ef50baec32f9445b375648
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Change-Id: I13777cf6f663ca8c52a059a60cfcdfe6ecc5b9ae
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The Piglin & Hoglin boards were built with a couple of different sizes
of ROM chips. Despite this, the desire was to use just a single FMD
file. The different sizes are already accounted for in Kconfig, so
add the Kconfig size here to be used.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ia75725b0c4d61e832c94160fa4cd455e89c60274
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Adjust scl_lcnt, scl_hcnt, sda_hold value for I2C5 to meet
touchpad SPEC.
BUG=b:260540852
BRANCH=firmware-brya-14505.B
TEST=build, checked TP function work normally,
and measure the timing meet SPEC
tLOW ~1.72 us
tHIGH ~0.63 us
tHD ~0.69 us
fscl 383 kHz
Change-Id: I9036a604a90558911c4f8a492db9f1f0f28bf404
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Fine-tune eMMC DLL based on Xivu EVT system.
BUG=b:256538132
TEST=executed 3000 cycles of cold boot successfully
Change-Id: Iaa8338fd0faa0e01f42ee77dea135c7a241ed3be
Signed-off-by: Lawrence Chang <lawrence.chang@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69892
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DPTC support for frostflow.
BUG=b:257187831
TEST=emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Iac7b8789a5189827fe98cb06328d666300841a5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69931
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refer to brask board to add audio settings for gaelin.
BUG=b:253177160
BRANCH=firmware-brya-14505.B
TEST=Able to verify audio playback on gaelin with kernel v5.10.
Change-Id: Ibc8cacce6cb4b3e55fc7332bb9eb9ac20848fc5b
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Modify USB2.0 port[4] settings to support camera.
BUG=b:238252678
BRANCH=firmware-brya-14505.B
TEST=with brask overlay changes, camera in camera app works
Change-Id: I42325b75e129429ee451ded6a2086fd3808e581a
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
GSPI2 interface is not used on this mainboard and can be disabled. It
will in addition remove the warning of a leftover static device in the
log.
Change-Id: I6e7462312953d50385ca7bb2f2e0abb8fc3a5886
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Commit 2c102232e8f7 ("mb/amd/chausie,google/skyrim: increase
RW_MRC_CACHE size to 120 kByte") increased the MRC cache size, but with
the change the default AMD_FWM_POSITION_INDEX which is 5 for the 16MByte
flash size, the amdfw part won't be placed on the expected position,
since the cbfs header is in that exact location and cbfstool places the
amdfw part right after that. Change the AMD_FWM_POSITION_INDEX to 4 for
the non-chromeos builds to work around this.
TEST=Non-chromeos chausie build now boots and doesn't fail any more
before releasing the x86 cores from reset
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I89fe1d0672139e04070f05c6c8fa8955edcfc7ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70133
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new audio sku configure for Pujjo board.
BUG=b:260538412
TEST=Boot to OS on pujjo and check that audio are configured
based on fw_config.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ia9ddc683945002a0b19efd67006e1983b2eb9f2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I0a7b3167392c152da6459dfc202ef11b2e61400a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69295
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4f30f5275d38c3eecf54d008b3edbf68071ab10d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69294
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4a49f37e6fe0cb04c8112baf36fd8d01ab218045
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69293
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of using a fake lapic device hook up the cpu cluster to chip
cpu/intel/model_206ax.
The lapic device is also not needed as the mp init will allocate it for
the BSP at runtime.
Change-Id: Id3b1c4ca027e2905535e137691c3e3e60417dbf3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Also remove the now unnecessary comments from the devicetree.
Change-Id: Iebbe12fd413b7a2eb1078a579e194eba821ada7c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When retrieving the SKU id value through the sku_id() function in
mainboard_needs_pcie_init(), we only want the values in the lower 5
bits as we can only represent SKU id up to 27. Everything in the
higher bits should be masked out because they are not needed.
BUG=b:254281839
BRANCH=None
TEST=Make sure that NVMe is not initialized
Tested on a herobrine board with SKU id 0
Change-Id: I0e786ec392b5e1484cb2ff6d83a8d4fdd698950c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70164
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, we are getting the sku id from the EC every time we call
the sku_id() function. However, this will never change so we only
need to retrieve it once. Inserting exit condition if sku id is
already set, then don't get it from the EC again.
Also, removing the ram_code function, which does nothing right now.
There is already a weak stub_function for this in
src/lib/coreboot_table.c that already does the same thing.
BUG=b:260740438,b:182963902
BRANCH=None
TEST=make sure image still boots to login on herobrine device
Change-Id: Ia787968100baf58a41ccce0cf95ed3ec9ce1758a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
|
|
Configure birman GPIOs per schematic 105-D67000-00B v0.7
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I5459efb38431e568e25405c440b5b9cf1354f02f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Expand DPTC_INPUT macro to supoort 13 DPTC thermal table parameters for
dynamic table switching support.
BRANCH=none
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I6d6a00f0eca0b0941860b9bc75da41d7a10d60e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Icbf9348447b9e7acc0caa8082cf5dd00853da37a
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
FSP silicon discards the request if the Voltage Regulator or SoC does
not support the feature.
BUG:b:259057787
TEST:Verify that the feature is enabled by reading from pcode
No PnP regression observed
BRANCH=firmware-brya-14505.B
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7e318534f1429af8ec06048430966344ddd346a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69579
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Jeremy Compostella <jeremy.compostella@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This only moves CPU configuration to a common place. Other PCI devices
can be done in follow-ups.
Change-Id: I9c5b6f25b779e28b6719cf70455ff0f1a916ad87
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56912
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch supports multiple camera modules based on FW_CONFIG.
BUG=b:251235140
TEST=Test the changes with ov2740/hi556 camera.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ib0a4f46d889e9f6c2898efee6825cf2d02252d87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jim Lai <jim.lai@intel.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
This patch enables crashlog for all brya projects.
BUG=b:190756531, b:259978562
BRANCH=None
TEST=emerge-brya coreboot chromeos-bootimage & ensure the crashlog
PCIe device 0xa.0 is enabled and intel-pmt kernel driver is
loaded.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Ib632c8ac9ea7a4f0e0b08b96eb149f8ef1386be0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68526
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This change disables unused PCIE RP8 and CLKSRC4. Without this change
sasukette cannot enter into s0ix properly.
BUG=b:259891452
TEST=Build and verified in sasukette
Change-Id: I61bcefa128d4f39613a760b647048f9e19e262c2
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I70fb470b63ddd06f1d1e34deaea296d81e24f75f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70058
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI DmaProperty for ethernet devices.
BUG=b:259716145
TEST=Verified SSDT on google/osiris.
Before:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
}
}
After:
Scope (\_SB.PCI0.RP01)
{
Device (RLTK)
{
Name (_HID, "R8168") // _HID: Hardware ID
Name (_UID, 0xD0E889DD) // _UID: Unique ID
Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name
Name (_ADR, 0x00000000) // _ADR: Address
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x07,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
})
}
}
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I647593fd02644d30cd21b60d8305c0ec55dc64cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70017
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:259716145
TEST=TBD
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ifaa0912b38129ed2db01fb78ed39c0db89e746fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70018
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ram_id:0100 for memory Samsung K3LKBKB0BM-MGCP.
Add new ram_id:0101 for memory Samsung K3LKCKC0BM-MGCP.
The RAM ID table has been assigned as:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
H9JCNNNCP3MLYR-N6E 1 (0001)
MT62F2G32D8DR-031 WT:B 2 (0010)
H9JCNNNFA5MLYR-N6E 3 (0011)
K3LKBKB0BM-MGCP 4 (0100)
K3LKCKC0BM-MGCP 5 (0101)
BUG=b:254758998
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I8ff879ff7185f5a0ca1b9632820aba3b0f5d02c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Set Package Power Parameters from AMD DevHub document #57316.
"stapm_time_constant_s" = "200"
BRANCH=none
BUG=b:257187831
TEST=emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I15a69df1436aba05bc19eaffd79394e5ca9bdb3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69565
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
The Skyrim devices share a common set of DPTC values to enable booting
with low/no battery. Rather than duplicating them in each variant's
overridetree.cb, move them into the baseboard/devicetree.cb.
BUG=b:217911928
TEST=tast run <IP> power.ShutdownWithCommandBatteryCutoff
Change-Id: I20f0a8259c2fc986da23026da88feadd69942046
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69904
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Name a variable based on its utility. `is_external` variable adds
`ExternalFacingPort` _DSD property to an ACPI device hence
rename it to `add_acpi_external_facing_port`.
BUG=b:259716145
TEST=Build google/rex with this flag and verify it in SSDT at
runtime.
SSDT snippet:
Name (_DSD, Package (0x04) // _DSD: Device-Specific Data
{
ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
Package (0x01)
{
Package (0x02)
{
"HotPlugSupportInD3",
One
}
},
ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
Package (0x01)
{
Package (0x02)
{
"ExternalFacingPort",
One
}
}
})
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I65100283ed9b65037c9890f28ecab41fcfa25d83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69970
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch will create the baseboard structure for mtlrvp. Changes
include,
1. Adding Baseboard config for mtlrvp in Kconfig
2. Move gpio.h to corresponding baseboard directory
3. Append header reference to CPPFLAGS_common in Makefile.inc
BUG=none
TEST=FW_NAME=mtlrvp_p emerge-rex coreboot chromeos-bootimage
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I82acb6879fecb242014258f2c358804d5abbbd48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69971
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
mayan is the reference board for the morgana SoC. It needs to be
updated to match the actual board design as well. amd/mayan is started
as a copy of amd/birman.
Change-Id: Id6801e6c6e706ae3878ce9e2c3d6452964235148
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70010
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on latest schematic to update the gpio table.
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=marasov emerge-brya coreboot
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I03b443826d39182eaf23ad3e4e0ba8d6b8a93022
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69180
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
SATA is not supported on google/rex hence disable it.
BUG=none
TEST=Build and boot to google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I35a742ab9782feed86c3af514505d870d181b34b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable NVMe GPIOs based on fw_config and add NVMe to devicetree.
Note, eMMC and NVMe are not probed in devicetree. On first boot in
factory, the device needs to boot with unprovisioned fw_config, so all
storage devices should be enabled when unprovisioned. Currently,
devicetree disables all probed devices when unprovisioned. If we want
eMMC and NVMe to be probed, support needs to be added for enabling
probed devices when unprovisioned.
BUG=b:259211172
TEST=Verified by ODM. On craask, LTE and WCAM still work. On craaskneto,
eMMC and NVMe SKUs can both boot.
Change-Id: I76a056cddff2246cfb5bb26ddbdfc333b49d9aaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69958
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow thermal table from thermal team.
1. Modify TS1 passive policy to 68.
BUG=b:249446156
TEST=emerge-nissa coreboot chromeos-bootimage
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I8539a29cab4863034a2b64d38aef4b772473246d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69960
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As for mainboard mc_ehl1, a hard real-time dependency is also required
for this mainboard. The L1 prefetcher on Elkhart Lake is too aggressive
which in the end leads to an increased number of cache misses. Disabling
the L1 prefetcher boosts up the performance (in some cases by more than
10 %) in this specific use case.
Change-Id: I07b27dd672533e693a6c2987d16f54333850760e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Move the chip configuration to the cpu cluster device.
It looks like none of the devicetree were featuring a lapic 0xacac,
nor was tcc_offset ever set, so this remains a NOP.
Change-Id: I296631511b0e31b0ed43ca8193552483bdab4482
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59315
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These boards do no fill MADT with useful information.
Change-Id: Ie61e4e4b03c9b7fcd70aba7a2bd71eadd6f4dab1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69777
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The cpu cluster is always present and it's the proper device to contain
the settings that need to be applied to all cpus. This makes it possible
to remove the fake lapic from devicetrees.
Change-Id: Ic449b2df8036e8c02b5559cca6b2e7479a70a786
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59314
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Set of boards and platforms did not have LINT1 configured
as NMI source.
Change-Id: I65044125562bda363b3a0d92da6137c77a28b587
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69528
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it
makes sense to have a unified name across different device drivers.
BUG=b:259716145
TEST=Verified that the _DSD object is still present in the SSDT.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I4e0829a76a193b0a1e1e0f2b7ce2119bb00dd696
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69937
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Perform a codec reset before configuring to avoid potential issues like
oryp5 had before 86f410479ca9 ("mb/system76/oryp5: Reset HDA before
configuring").
Inspecting proprietary firmware for multiple boards shows that this is
always done as well.
Change-Id: I64c1fd23f708f77a81fad0bc889f42d4df3f6e61
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66918
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
A function declaration without a prototype is deprecated in all versions
of C.
Change-Id: Ie22231908233f2fba25d78f6c5f53940011e8158
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69748
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add conn0/conn1 for pch_espi.
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I5969d2941c02400788d66521680fcd13d3a6b13f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69785
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Declare touchscreen and touchpad under I2C3 and I2C5
BUG=b:254365935
BRANCH=firmware-brya-14505.B
TEST=Built successfully
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ifc865fc0c0c42af0d74272289c562e347fac3a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69467
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set downshift counter to 2 for all Marvell PHYs on this mainboard before
the PHY downshifts to the next highest speed.
Change-Id: I32b5f25a3e1e0f962dff3110143e236992ef8e7d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69887
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On this mainboard Marvell PHY INTn is routed to LED[2] pin.
Change-Id: I28a78afdcf0599bb998f906ce8056a0586e24f33
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69434
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This mainboard has three Marvel PHYs connected to the internal SOC GbE
controllers. The default LED status after HW reset of this PHYs shows a
different mode than what is needed. LED[2] is not connected on this
mainboard.
This patch sets the following LED status:
LED[0] - 7 = On - 1000 Mbps Link, Off - Else
LED[1] - 1 = On - Link, Blink - Activity, Off - No Link
LED[2] - not connected
TEST=Try different register values to verify LED feature.
Change-Id: I51d817bc720bf787279777f503efdc17dbb1274d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69387
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust SPD ID order
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 1 (0001)
MT62F1G32D4DR-031 WT:B 2 (0010)
H9JCNNNCP3MLYR-N6E 3 (0011)
BUG=b:254365935
BRANCH=None
TEST=run part_id_gen to generate SPD id
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I3a62cf355508debce387c48d9d089e73763b2bf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69784
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adding cros_gpios for crossystem to access WP GPIO
BUG=b:258048687
TEST= run FAFT firmware_WriteProtect passed.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: Ieac1df805c6399aefdc13aae136630d496aacd58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69924
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The brask doesn't include a real chassis so we don't need to configure
the fan setting in the overridetree.cb. Instead, we can leave the fan
running at full speed after the device boot up.
BUG=b:259643676
BRANCH=firmware-brya-14505.B
TEST=flashed the bios to the device and make sure the fan spinned
at full speed.
Change-Id: I6075b6171ca4d7b907679efd0ce7e355759385bc
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Based on the latest schematic to update the gpio table.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ifaf0629dcd77d21cf09fe84e760f1f22c075467f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Override devicetree configuration based on the latest gaelin schematic.
BUG=b:249000573, b:254375472
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=emerge-brask coreboot
Change-Id: I3a741feec52cf73da8d6ec0b03cc93d6a4cba256
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update devicetree setting per the schematic.
BUG=b:239513596
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I8746d44daa43c06723bdfcac6803eb90a3c124b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This reverts commit 7203aa5c2dcb90e50356305cabbe062bd4f4dc76.
BUG=b:260138434
TEST=None
Cq-Depend: chrome-internal:5126951, chromium:4049177
Change-Id: Ieaa44a33a7c65d384581b5145821b449783ca3fa
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
All parameters of DPTC_INPUT() need to be configured on devicetree
when SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enabled. The parameters without
configurations on devicetree would be 0 when
SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enable. Follow AMD DevHub document
#57316. Configure vrm_current_limit_mA, vrm_maximum_current_limit_mA
and vrm_soc_current_limit_mA on devicetree with thermal table config E
as default table for SMT. Since the dynamic thermal table switching
mechanism is still under cooking, after discussing with thermal team,
suggest adopting config E(limit Soc not reach to max power) as default
thermal config to avoidany thermal-related issue during phase build.
Once the dynamic thermal table switching mechanism is finished, will
change the default value to config A.
BUG=b:258572474, b:248976976, b:259167917, b:257394883
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Ic1e7a46cac4119c7237d96a7bd0d23c8db028680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
It shouldn't be assumed that all variants of skyrim will use the same
gpio for TPM interrupts.
Use the PSP's new mailbox command to tell it what gpio the tpm interrupt
comes in on.
BUG=b:248193764
TEST=tast run <ip> hwsec.TPMContest
Verify log entry:[DEBUG] PSP: Setting TPM GPIO to 18...OK
Use incorrect GPIO in mailbox cmd and verify TPMContest test
failed.
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Change-Id: I9f4005e10987caf9f32e5ac99ff5f2b9467e586c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69874
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For nissa, the ISH main firmware will be included in the CSE region in
flash instead of loading it from rootfs. So remove the ISH
firmware-name.
BUG=b:234776154
TEST=Boot to OS on nirwen and yaviks UFS SKUs. Check ISH firmware is not
loaded by kernel, and device still goes to S0i3.
Cq-Depend: chrome-internal:5102230
Change-Id: I68f963e17bc0dbf9db9adaaa3f96f06b8737523b
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:253387689
Test:Boot to OS on craask and check SAR Proximity Sensor GPIO pin
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I2b2a2516890b68036e96d1a542e6a10a098cb6a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69790
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Move smbios_ec_revision to ocp folder so that all ocp boards
share the same function without implementing again.
TESTED=Execute "dmidecode -t 0" to check corresponding field.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Jonzhang Zhang <jonzhang@meta.com>
Change-Id: I898662b78d3dbab1861cee6f1b6e148297a5d11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68785
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
field STORAGE 30 31
option STORAGE_UNKNOWN 0
option STORAGE_NVME 1
option STORAGE_UFS 2
end
BUG=b:254365935
TEST=emerge-brya coreboot.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I17f8a852808d279a1f2b08b364cd4e525a807560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69786
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
One register configuring multi-pin functions was outside of the Global
Configuration Registers space and skipped in the initial port patches.
Replicate the vendor configuration and set the Super I/O pin for PECI
functionality.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I90f142a1a9ee27dd061fc71b791bd4c7df97da6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68711
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables the DisplayPort detection at preboot for Rex board.
BUG=b:247670186
TEST=Built image and validated DisplayPort feature at preboot on Rex.
Change-Id: I1a8a13e937c7132696aa39d85c3c6b6fb2dd13a5
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67742
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all
references.
BUG=b:216485035,b:258126464
BRANCH=none
TEST=none
Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:235919755
Test=Check error message "Exposing GPIOs in Power Resource and _CRS"
not show in firmware log.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I21a47adde48555098d041b94d483cad308bdb717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This patch deselects `USE_PM_ACPI_TIMER` kconfig to ensure that
ACPI PM timer remains disabled.
The PM timer (by PMC IP) consumes more power and blocks S0ix so the
timer is emulated by ucode to save power and unblock S0ix.
TEST=Able to boot Google, Rex and ensure PMC MMIO register 0x18fc
BIT 1 is set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2a23b417ff7fb6328323380a7df46b4b397fc8eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69685
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:231291430
TEST=See STB Spill-to-DRAM enabled
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib60b7fc2ba85c7a8025c9f8c6495e94049499f56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69707
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
device
Instead of creating a dummy I2C device in order to force Linux to
decrease the I2C bus speed, use the own 'bus_speed' field of RV3028
device config structure.
Linux should always set the bus speed to the speed of the slowest
device sitting on the bus. Hence the dummy device is not needed
here anymore.
BUG=none
TEST=See if the RV3028 RTC is visible and working (date/time can
be set/read) in Linux. At the time, a driver modification is needed
to add a match table for the "MCRY3028" ACPI HID. A proper kernel
patch is pending.
Change-Id: I6e269dc67d1fe2a6747fcf3bee224def7b553f08
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69544
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Implement mainboard_needs_pcie_init() for herobrine in order to
determine if we need to initialize the pcie links. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with
NVMe will fail to boot.
BUG=b:254281839
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I8972424f0c5d082165c185ab52a638e8b134064c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Modify the chromeos FMD file for nissa variants to redistribute the
buffer in SI_ME region obtained due to CSE size optimizations to SI_BIOS
region.
1. Modify SI_ALL region size to 3712K. SI_DESC remains at 4K and SI_ME
is 3708K.
2. Modify SI_BIOS region to 12672K. This results in an addition of 32K
buffer each to FW_MAIN_A/B regions.
BUG=b:228936671
BRANCH=firmware-nissa-15217.B
TEST=Verify CSE FW update with new FMD and ME RW blobs on craask.
Cq-Depend: chrome-internal:5094491
Change-Id: I5ead2f81850a2aa79e677c7f271db672e235750a
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
+-----------+-------+-------+---------+-------------+----------+
| Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time |
| |(mOhms)|(mOhms)| (A) | (A) | (msec) |
+-----------+-------+-------+---------+-------------+----------+
| IA | 2.8 | 2.8 | 80 | 43 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
| GT | 3.2 | 3.2 | 40 | 23 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
- IA TDC current from 20A to 43A.
- GT TDC current from 20A to 23A.
BUG=b:256754175
TEST=Build test image and use PTAT to check IA and GT value
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: Ife36655f077bae567bff3c3e33f779c990cf5ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69135
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
No boards now have a missing dependency so remove the workaround.
Change-Id: I787f6aa588175ba620a068918c42edc9d257c3ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69514
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch adds unique device-locators, bank-locators and
asset-tags to the smbios type17 tables by making use of a
DIMMs controller-ID. This way we avoid name clashes when,
for example, two DIMMs share the same channel-ID and DIMM-ID
but have a distinct controller-ID.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I8aef79faa43f2475485f581c675ee152e580f678
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Update touchscreen setting.
Change hid as panel team request to fix touchscreen with no function.
The panel team verification result is on b/251378772 comment#17.
BUG=b:251378772
TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is
functional.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I07d446111b1c18bfe15d00b6eacff23382cd461a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
None of the touchscreens (over I2C) used in the rex program requires
exporting GPIOs in the ACPI _CRS method.
This can cause i2c devices to malfunction or cause timing
sequence violations if ACPI exports a PowerResource for the
device that uses GPIOs that are also exported in _CRS.
BUG=none
TEST=Able to build and boot Google, Rex platform.
Without this patch:
[ERROR] I2C: 00:10: Exposing GPIOs in Power Resource and _CRS
With this patch:
None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I578a60eff27f94d6dc94b900604bc7560337d60b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69612
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tune timing between power on and reset on SD device RTD3.
BUG=b:250746988
TEST=Use the value to boot on Pujjo successfully.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I1ea77ec8381000249229653f1c0b9044bdf7866d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Commit 9bbc039c457774dbeb44ea37ecc6507144d49b61 ("soc/intel/skylake:
Hook up FSP hyper-threading setting to option API") already hooks up
the `hyper_threading` CMOS option in SoC code, so there's no need to
do it from mainboard code.
Change-Id: I602452266a8465cced12454f800ea023f382ba6f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69522
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `hyper_threading` CMOS option was hooked up to the wrong enumeration
and lacked a default value in `cmos.default`. Thus, use the correct enum
for the `hyper_threading` option, remove the now-unused "backwards" enum
and provide a default value in `cmos.default`.
Change-Id: I2ee9ced2881ed5e348e84a35e8abd6b7a363d936
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69491
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6d8efe783e6cc5413c3fd0583574a075a2c3876b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
