| Age | Commit message (Collapse) | Author |
|---|
|
The superio.asl wasn't being included within the right scope.
Fix that as well as clean up the per-mainboard header includes
to be in one place.
BUG=chrome-os-partner:56677
Change-Id: I5e6a82f9f2e3c7455132263d19b32b2f06220376
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16413
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
|
|
Some of the macros in gpio.h are no longer used because
devicetree.cb is being used to autogeneric the ACPI AML.
Therefore remove the unused macros.
BUG=chrome-os-partner:56677
Change-Id: I433a929229a0318f6c1df652655d046a5152cc63
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16412
Tested-by: build bot (Jenkins)
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
The following patch is based off of the UEFI 2.6 patch. The FSP header files
are temporarily staying in soc/intel/apollolake and FspUpd.h has been relocated
since the other headers expect it to be in the root of an includable directory.
Any struct defines were removed since they are defined in the headers and no
longer need to be explicity declared as struct with the UEFI 2.6 includes.
BUG=chrome-os-partner:54100
BRANCH=none
TEST=confirmed coreboot builds successfully
Change-Id: I10739dca1b6da3f15bd850adf06238f7c51508f7
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>#
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/16308
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Replace the use of the old device_t definition inside
mainboard/lenovo/x60.
The patch has been tested both with the arch/io.h definition of device_t
enabled and disabled in order to ensure compatibility while the
transaction takes place.
Change-Id: Icaceeae2fc7276efa82d37582ecac93aaf37c41c
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16372
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Uses gpio.h instead of default_southbridge_gpio_setup to configure
southbridge GPIO's. This is more consistent with how GPIO's are
configured on newer targets.
Change-Id: I6ccd0564b929e958864739b7cde04f5592c58479
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16379
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
All but ga-g41m-es2l/cmos.default had multiple final newlines.
ga-g41m-es2l/cmos.default had no final newline.
Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16361
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Antonello Dettori <dev@dettori.io>
|
|
Many changes make proto boards very hard to work with since
proto boards were using A stepping processors. Everyone has
moved on. Therefore, drop non-proto support.
BUG=chrome-os-partner:56791
Change-Id: I2985e3965b1b69445e22506bd664b4cbca13c8ab
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16377
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
A pen interface was added. Prepare for possibly testing it by
plumbing in the gpio configuration. It's very possible these
changes need to be tweaked, but no driver code has been seen
yet nor a datasheet detailing how some of these signals actually
function.
BUG=chrome-os-partner:56739
Change-Id: I208ff3e151ce55d62e5fcc33a1e39cc87e229970
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16376
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The formerly name FP_INT_L net is actually active high and is push-pull.
Therefore adjust for the new net name, FP_INT, and polarity. The
pulldowns are there because the device is on another board that isn't
always available.
BUG=chrome-os-partner:56740
Change-Id: I6706fd2c2bd164cf3b5f1457aef69f5675f2112d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16375
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Two new SKUs are being utilized for reef DVT. Add the following:
Hynix 8GiB using H9HCNNNBPUMLHR-NLE -- id: 4'b0100
Hynix 4GIB using H9HCNNN8KUMLHR-NLE -- id: 4'b0101
BUG=chrome-os-partner:56738
Change-Id: I39ed9e827501939b92cbcce6092302b5a23d1d78
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16374
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The reef DVT build added another way to assert the wifi module's
reset line. Ensure it's deasserted by default. For previous boards
this GPIO doesn't matter because it wasn't routed anyway.
BUG=chrome-os-partner:56737
Change-Id: I63e97b091ca0a278682c883303b1d7e052d8e677
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16373
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Before, we calculate the pwm duties for cpu cores and centerlogic by
hand, adding pwm_regulator.c to handle this. The default pwm design
min/max voltage may be different between revs.
With the pwm regulator, this patch changes the little cpu frequency from
600M to 1512M, and raises CPU voltage to 1.2V correspondingly.
This also means we decide to drop the ES1 because it may fail to
bootup with 1.5G ~ 1.2v.
BRANCH=none
BUG=chrome-os-partner:54376,chrome-os-partner:54862
TEST=Bootup on kevin board
Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9
Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b
Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/364410
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16368
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On i945 the vram size is the default 8mb. It is also possible
to set it 1mb or 0mb hardcoding the GGC register in early_init.c
The intel documentation on i945, "Mobile Intel® 945 Express Chipset
Family datasheet june 2008" only documents those three options.
They are set using 3 bits. The documententation also makes mention
of 4mb, 16mb, 32mb, 48mb, 64mb but not how to set it.
The other non documented (straight forward) bit combinations allow
to change the VRAM size to those other states.
What this patch does is:
- add those undocumented registers with their respective vram size to
the i945 NB code;
- make this a cmos option on targets that have this northbridge.
TEST: build, flash to target, set cmos as desired and boot linux.
On Debian it can be found using "dmesg | grep stolen".
NOTE: dmesg message about reserved vram are quite different depending
on linux version
Change-Id: Ia71367ae3efb51bd64affd728407b8386e74594f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/14819
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The romstage.c is more board related than soc specific, like
setting the pwm regulators, so moving it to mainboard/gru.
BRANCH=none
BUG=chrome-os-partner:54819
TEST=Bootup on kevin board
Change-Id: I83c6cde9f451480e47e2b4b549cedf65b345134c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 35feeb07131a6a9de4adde035236987391833474
Original-Change-Id: If2bf245302eb4fb20bb089c1b3ffa03909722443
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/375398
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16367
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide GBB's hardware ID (used on Chrome OS devices) because it will be
dropped from depthcharge.
BRANCH=none
BUG=none
TEST=none
Change-Id: I4851c1bdb21863983277d3283105c88b85a6166b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 705251d2899bc006e21ff3e34a3fc3eba2dd4d00
Original-Change-Id: I7488533b83b8119f8c85cbf2c2eeddabb8e9487d
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/372579
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16363
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Certain LPDDR4 models have some HW issues that can be worked around
by turning off Periodic Retraining feature in the memory controller.
Add option to disable PR per SKU.
BUG=chrome-os-partner:55466
TEST=run RMT test, pass
Change-Id: Ie7aa79586665f6d3a7edd854a9eef07e6a1b2ab8
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/16320
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This corrects indentation for sdram configs in nyan_blaze.
Change-Id: Ia9ad2a37c6e3b79e1260f490db893244c32685b6
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/16342
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The reef board needs at least ~28ms for its S0 rails to discharge
when S3 is entered. Because of the granularity in the chipset the
effective SLP_S3_L assertion width is 50ms.
BUG=chrome-os-partner:56581
Change-Id: I20514eb0825cd4bc2ee9276b648204b7bfd6a7b0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16327
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch changes Gru SDRAM parameters from structures that just get
compiled into the romstage to individual CBFS files. This allows us to
only load the parameter set we need for the board we're booting from
flash, which reduces our boot time and the SRAM memory footprint
required to hold the romstage.
TEST=Booted Kevin.
Change-Id: Ie88a515cbdb19a794ca0a230a56bcc82bed1e550
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16274
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This enables the C4 low power state on the lenovo x200 and t400.
It's inspired by the thread on the mailinglist:
"[coreboot] Lenovo X200 running Coreboot drains 3-4W more power
than with Vendor BIOS".
What this does, is to enable a C3 state using MWAIT(C3) request
and set the southbridge config c4onc3_enable to automatically
upgrade C3 to the lower power C4 state.
The latency (0x37) is the same value used by the vendor bios.
With C4 enabled the idle power consumption is about ~2-3W lower.
TEST= build and install on target. Use powertop top to measure power
usage. To manually disable c-state to compare them,
do (tested on linux 4.4):
echo 1 > /sys/devices/system/cpu/cpu*/cpuidle/stateX/disable
Change-Id: I1a1663a7662ebc7157a965667680688ad6a33545
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/15251
Tested-by: build bot (Jenkins)
Reviewed-by: Swift Geek
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
On x86 platforms, google_chromeec_early_init() is used to put the EC
into RO mode when there's a recovery request. This is to avoid training
memory multiple times when the recovery request is through an EC host
event while the EC is running RW code. Under that condition the EC will
be reset (along with the rest of the system) when the kernel verification
happens. This leads to an execessively long recovery path because of the
double reboot performing full memory training each time.
By putting this logic into the verstage program this reduces the
bootblock size on the skylake boards. Additionally, this provides the
the correct logic for all future boards since it's not tied to FSP
nor the mainboard itself. Lastly, this double memory training protection
works only for platforms which verify starting from bootblock. The
platforms which don't start verifying until after romstage need to
have their own calls (such as haswell and baytrail).
Change-Id: Ia8385dfc136b09fb20bd3519f3cc621e540b11a5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16318
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Apply eMMC tuned DLL settings for reef evt.
Modify comments to avoid replicating info.
Add EDS reference.
BUG=chrome-os-partner:55648
BRANCH=none
TEST=Verify that reef evt boots to OS from eMMC.
Change-Id: If3bf51f3b7d38320f504ea6fbecf7c188a94ae5c
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-on: https://review.coreboot.org/16296
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Not all SBI calls are implemented, but it's enough to see a couple dozen
lines of Linux boot output.
It should also be noted that the SBI is still in flux:
https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/6oNhlW0OFKM
Change-Id: I80e4fe508336d6428ca7136bc388fbc3cda4f1e4
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16119
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I9789b0b3339435fbe30c69221826bf23c9b3c77b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16283
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add cmos.default file in order to ease future testing and debugging of
cmos related code.
Change-Id: I7c6a0aa4e38bb08a520e4838fa216c81b50f2917
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16247
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The ASUS KGPE-D16 accepts an optional Infineon LPC TPM module.
Expose the TPM LPC device to the host operating system.
Change-Id: If500e9162bf1e233ccaa35db79452daa59a34f2f
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-on: https://review.coreboot.org/16269
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I49925040d951dffb9c11425334674d8d498821f0
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-on: https://review.coreboot.org/16268
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
|
|
Add support for SMBIOS memory HOB save.
Add DIMM 'part_num' info to be saved as part of SMBIOS memory HOB.
BUG=chrome-os-partner:55505
TEST='dmidecode -t 17' and 'mosys -k memory spd print all'
Change-Id: I53b4a578f31c93b8921dea373842b8d998127508
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/16249
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We should be running faster. Faster = better.
BRANCH=None
BUG=chrome-os-partner:54873
TEST=Boot; stressapptest -M 1028 -s 10000
Change-Id: I7f855960af3142efb71cf9c15edd1da66084e9d8
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 51bfd2abb1aba839bd0b5b85e9e918f3cc4fd94d
Original-Change-Id: Iec9343763c1a5a5344959b6e8c4dee8079cf8a20
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/362822
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16241
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This aligns the code in qemu-riscv with the code in spike-riscv.
The previous code gives an error in the updated toolchain as the
send_ipi CSR is no longer valid.
This gave the build error:
src/mainboard/emulation/qemu-riscv/qemu_util.c:64:
Error: Instruction csrw requires absolute expression
Change-Id: Iac0f66e8e9935f45c8094d5e16bedb7ac5225424
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16244
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
Before entering sleep, ensure that the NFC gpios are configured
correctly to avoid leakage.
BUG=chrome-os-partner:56281
Change-Id: I2bb2e7ba468df445aa5f6c2b22ae0a74fcaa44f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16243
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update eMMC DLL setting for amenia board, after that system can
boot up with eMMC successfully.
BUG=chrome-os-partner:51844
TEST=Boot up with eMMC
Change-Id: Ia7bd96db69fbe575e57847249c34d91b2a1fdcef
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16237
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Almost all boards and chipsets within the codebase assume or
use SPI flash as the boot device. Therefore, provide an option
for the boards/chipsets which don't currently support SPI flash
as the boot device. The default is to assume SPI flash is the
boot device unless otherwise instructed. This falls in line
with the current assumptions, but it also allows one to
differentiate a platform desiring SPI flash support while it not
being the actual boot device.
One thing to note is that while google/daisy does boot with SPI
flash part no SPI API interfaces were ever implemented. Therefore,
mark that board as not having a SPI boot device.
BUG=chrome-os-partner:56151
Change-Id: Id4e0b4ec5e440e41421fbb6d0ca2be4185b62a6e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16191
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector
code) the reboot counter stored in `reboot_bits` isn't reset on a reboot
with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR
enabled, later stages (e.g. payload, OS) have to clear the counter too,
when they want to switch to normal boot. So change the bits to (h)ex
instead of (r)eserved.
To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also
remove all occurences of the obsolete `last_boot` bit that have sneaked
in again since 24391321 (mainboard: Remove last_boot NVRAM option).
Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/16157
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This reverts commit 462e1413 ("rockchip: rk3399: enable sdhci clk
for emmc")
Enabling this clock in coreboot is no longer needed as it's handled
in the kernel driver now.
BUG=chrome-os-partner:52873
TEST=boot from usb/sdcard and check there is /dev/mmcblk0
BRANCH=none
Change-Id: I92cf51f175fe56a09ab9329b29a27c77ef4328e1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5707d1269a253dabf825be120d1f9348ffaab6d0
Original-Change-Id: I8bca870c663d8ce8fac5daaaaf8225489f22ed13
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/367421
Original-Commit-Ready: Brian Norris <briannorris@chromium.org>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16152
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is a temporary work-around since the current threshold of 70 on
TSR2 results in thermal trip and shutdown while the kernel is
booting. Changing this threshold to 100 allows kernel to boot up to
userspace. Following values were read:
$ cat /sys/class/thermal/thermal_zone4/temp
81800
$ cat /sys/class/thermal/thermal_zone4/type
TSR2
BUG=chrome-os-partner:56155
BRANCH=None
TEST=Boots to OS.
Change-Id: I951553ed4c93b02239a51a0d3036e4a750eea04b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16156
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
The BOOT_MEDIA_SPI_CHIP_SELECT option is not used in any of the
code. Remove its usage.
BUG=chrome-os-partner:56151
Change-Id: I522b62a2371b8a167ce17c48117669390cda14cd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16185
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I990038c09f5805c8e670fd316808dde767e8671b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16159
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15987
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This reverts commit 850e45f19f498eedd80da4a97a5ce641e2cec6d5.
google_chromeec_init() is a weird function that can lead to confusing
behavior. I'm not sure how it's meant to work on the boards that use it,
but it causes problems on Kevin and other non-x86 boards have never used
it either. It doesn't really do anything anyway (the EC works fine
without an initial HELLO), so at best it's just a waste of time... let's
take it back out.
There's also no need to display the current time on every boot... other
boards don't do that and the eventlog already fills the same purpose.
Cut it out to avoid one extra host command overhead.
BRANCH=None
BUG=chrome-os-partner:55995
TEST=Recovery reasons now get correctly propagated across the EC reboot.
Change-Id: Ic3b772780d4d05e362c269969e6e4e7069482bb6
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 103d86e68cd164bea39aa1edc8668d80358edbde
Original-Change-Id: I58fd5e6094e1c8cb6368e7a4569ab9231375fbc9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/367351
Original-Reviewed-by: Simon Glass <sjg@chromium.org>
Original-Reviewed-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/16153
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
1. Get rid of LBP2 partition
2. Shrink RO size
3. Increase RW-A and RW-B sizes
4. Increase RW_MRC_CACHE size
CQ-DEPEND=CL:366793
BUG=chrome-os-partner:52127, chrome-os-partner:55699,
chrome-os-partner:55778
BRANCH=None
TEST=Compiles successfully. Boots to OS.
Change-Id: Iad41d8cc7697e6d73f1aa2c699b0e8559349b77e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/16145
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like
SuperSpeed line muxing for rotated cable orientations in the SoC. While
fancy, this is very complicated and we don't want to implement support
for the whole thing in firmware. The USB Type-C standard has
intentionally been designed in a way that the USB 2.0 (HighSpeed) lines
always "just work" in any orientation (by just shorting different pins
in the connector together) so that simple use cases like ours can get
basic USB functionality without much hassle.
However, a semi-configured Type-C PHY can confuse USB 3.0 capable
devices into thinking we're actually supporting SuperSpeed, and fail at
that rather than establishing a reliable HighSpeed connection. This
patch sets enough bits in the Type-C PHY to electrically isolate the
SuperSpeed lines from the connector so that the connected device isn't
going to get any fancy ideas and reliably falls back to USB 2.0.
Also clean up the rest of the USB code while we're at it: avoid writing
a few bits that are already in the right state from their reset values
anyway, or reading values whose content we already know for this SoC.
Rename the USB controllers to the name actually used in the Rockchip
documentation (USB OTGx) rather than the name blindly copied from
Exynos code (USB DRDx).
BRANCH=None
BUG=chrome-os-partner:54621
TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all
orientations, observe how it gets reliably detected now (safe for some
known hardware issues on my board).
Change-Id: Ifce6bcddd69f2e8f2e2a2f48faf65551e084da1e
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: c526906f998bf66067d3addb8b3d3a126c188b1e
Original-Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/366160
Original-Reviewed-by: liangfeng wu <wulf@rock-chips.com>
Original-Reviewed-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-by: <515506667@qq.com>
Reviewed-on: https://review.coreboot.org/16125
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I5a6d41f815f65719780499fa18c131311a9dc8f7
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/16136
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add GPIOs initialisation before dock check.
Needed in order to properly detect the presence or absence of the lenovo
dock.
Previously the check always reported the dock as connected and currently
it always reports it as disconnected since the GPIOs are not properly
initialised during the check.
Tested and confirmed working.
Change-Id: I7fbf8c2262a1eb5dee9cbe5e23bf44f7f8181009
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16139
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
BUG=chrome-os-partner:51844
TEST=Boot to chrome
Change-Id: I66178cc75872f14941434081d9650a569a084d04
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16135
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=chrome-os-partner:51844
TEST=Boot to chrome
Change-Id: I60d411482812d98cb8dd11d66b0fc96ea9bae895
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16134
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Set default value for UART port
BUG=chrome-os-partner:51844
TEST=Boot to chrome and check console
Change-Id: I5e76066e0ff531303595dcd5a99f2f8db379e89b
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16133
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update flash image size to 16MB and update image layout
in flashmap descriptor file.
BUG=chrome-os-partner:51844
TEST=Boot to chrome
Change-Id: Ibdfb2949d06aedc38ddcef1078c2d14abcfa2dac
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/16083
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch adds mainboard_smi_gpi_handler which handles the
SMI event. This can happen in situations like lidclose and
system goes to shutdown.
BUG=chrome-os-partner:54977
TEST=When system is in firmware mode executing the command
lidclose from ec console shuts down the system.
Change-Id: I8ff6001e48dcbbd4cee5097e759352d8fea6189b
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15834
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The write protect GPIO is active high, not active low.
After fixing I can see this after removing the write-protect screw:
$ crossystem | grep wpsw_boot
wpsw_boot = 0
Putting the screw in shows:
$ crossystem | grep wpsw_boot
wpsw_boot = 1
Caution: this CL contains explicit material. It explicitly sets the
pullup on the WP GPIO even though that's the boot default.
BRANCH=None
BUG=chrome-os-partner:55933
TEST=See desc.
Change-Id: I23e17e3bbbe7dcd83e81814de46117491e61baaa
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: e6969f4be42c00c6e88bbb14929cf0454462ad21
Original-Change-Id: Ie65db9cf182b0a0a05ae412f86904df6b239e0f4
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/366131
Original-Tested-by: Brian Norris <briannorris@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16115
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This adds a cmos.layout and a cmos.default to ga-g41m-es2l.
This allows to set things like baud_rate, debug_level, etc.
from cmos.
Change-Id: I25df7a1f3a0ce486b96cfe05bda628f604b0baec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/15493
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The rush_ryu board was a development platform that never made it into
a product. Remove it as it's not available to anyone.
BUG=chrome-os-partner:55932
Change-Id: Ia3836ff8cade3009730543177a66736ae197572b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16107
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The rush board was a development platform that never made it into
a product. Remove it as it's not available to anyone.
BUG=chrome-os-partner:55932
Change-Id: I0f77bb791491509da7bd9cf25050e01c2f734a2f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16106
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Looks like our hardware guys have decided to change some voltage ranges
in the Gru/Kevin ADC IDs since we last wrote a table. This patch updates
it to the latest values from the Spreadsheet of Truth. Also adds further
values up to rev15.
BRANCH=none
BUG=none
TEST=none
Change-Id: I1aa093ca3abe952afd658eb7da01b325f798eaa0
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: e42b4685c91f01ce1cff61638b17042be9d575fd
Original-Change-Id: I646fd03dc385df1a8f0af8cb85ff3128cc31f8d8
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/365111
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16053
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I84d61c8ade6e42e314a31e1155b4d5628b16199a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16081
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Program PIRQ Routing with correct values, as done by FSP, and also in
'soc/intel/skylake/romstage/pch.c' file. If not done, these values get
overridden by "0" during PxRC -> PIRQ programming in ramstage, in
'soc/intel/skylake/lpc.c' file pch_pirq_init()function.
BUG=none
BRANCH=none
TEST=Build and boot kunimitsu
Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16044
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
SDIO D1 pin needs to be configured as Native mode to
enable SCS Power Gating.
BUG=chrome-os-partner:54251
TEST=Verify SCS Power Gating
Change-Id: Ic33b26443203217678e11d195eb965a7e628ad82
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/16062
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable I2C bus 2 for early init so it can be used by vboot for TPM
communication for verifying the memory init code.
BUG=chrome-os-partner:53336
BRANCH=none
TEST=build and boot on reef
Change-Id: Id4940ab01d8ccf288ab0a7a9a2f19867ed464e8d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/16059
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SD CLK and CLK_FB needs to be pulled down by 20K.
SD CD_N is active LOW, needs to be pulled up by 20K
SD WP pin is not connected for uSD cards, enable writes
by default by pulling low by 20K.
BUG=chrome-os-partner:54866
BRANCH=None
TEST=Test with uSD cards.
Change-Id: Ia4bbd966ffb21e276dfc31a74f4ea54718900d66
Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Reviewed-on: https://review.coreboot.org/16057
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the pieces necessary to successfully build and run romstage using
the FSP 2.0 build. Because romstage is using postcar, add the postcar
pieces so that romstage can attempt to load postcar.
TEST=Build and run on Galileo Gen2
Change-Id: I66b3437e3c7840223535f6ab643599c9e4924968
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15866
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add the pieces necessary to successfully build and run bootblock using
the FSP 2.0 build.
TEST=Build and run bootblock on Galileo Gen2
Change-Id: I2377f0b0147196f100396b8cd7eaca8f92d6932f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15865
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In some cases, we don't want the Chrome EC firmwares (both EC and PD)
built directly by the coreboot build system or included in images at
all. This is already supported with EC_EXTERNAL_FIRMWARE but it does
implement a binary (build and include) or (neither build nor include)
policy.
Some cases require the ability to separately control whether the EC
and PD firmwares should be built and included by the coreboot build
system, only included from externally-built images or not included
at all.
This introduces config changes implementing that behaviour, renaming
options to make it clear that they are specific to the Chrome EC.
Change-Id: I44ccee715419360eb7d83863f4f134fcda14a8e4
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/16033
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
PMIC/PMU: Set the iosstates for PMIC to assert the reset
signal, PMU to assert SLP_S0 signal.
Change-Id: If5a6a1cb8f065a8c3a6a19d9441a21d60b39e579
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Signed-off-by: Shankar, Vaibhav <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/16031
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
I'm not sure if that's the right fix here, but assuming the bit mask is
right, the inb is wrong.
Change-Id: I7e33019af088780a09be12513200bec63734bf97
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1229556
Reviewed-on: https://review.coreboot.org/16026
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
EVT1 has two board IDs.
Use binary first mode of base3 encoding for board ID.
BUG=chrome-os-partner:55320
TEST=None.
BRANCH=None
Change-Id: I1cac1f74207f42616111d39db5c0494b7d1a0fb2
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 2b16cc74c4c147315b7db345678bbaf536ab4a7b
Original-Change-Id: I6e95c7be4a6d28a0aae38b0838bd2ab71d288ba1
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/364623
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org>
Reviewed-on: https://review.coreboot.org/16030
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Coming Kevin revisions will switch back to an I2C TPM. This patch adds
the required configuration options and code to support that. Since the
TPM type can currently only be changed at compile time, we can no longer
support older Kevins with the same image. In order to build for Kevin
revisions < 5, you have to explicitly override the CONFIG_GRU_HAS_TPM2.
BRANCH=None
BUG=chrome-os-partner:55523
TEST=Compiled both Kevin and Gru, confirmed that bootblock and verstage
binary had the appropriate code differences.
Change-Id: I1b2abe0f331eb103eb0a84f773ee7521d31ae5d8
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 3245bff937154f0f9f39894de9c98a75631d59d9
Original-Change-Id: I81a15c9fb037a7ca2d69818e46cbb4f9a5ae1989
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/364222
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16029
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
This patch adds support for the Gru rev1 board. This board differs from
rev0 by no longer relying on the I2C backlight booster and requiring the
same ODT SDRAM settings as newer Kevin boards.
BRANCH=None
BUG=chrome-os-partner:55087
TEST=None
Change-Id: I1428760540a0aaaa0c02c6cb5b0981294ba4df33
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 8de7bcc78c6c48c251c85185e238cea7812f7a28
Original-Change-Id: I3cb49bc644190f35300e6c618b2934956fa88e5b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/364624
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/16028
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add and adjust the Kconfig flags to support both FSP 1.1 and FSP 2.0
builds for Quark.
TEST=Build and run on Galileo Gen2
Change-Id: I7c5b7efd2635180edcfe4e1a98bb292030117bc8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15864
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add assert.h to use coreboot's ASSERT macro.
Replace the use of UINT8 data type with uint8_t.
TEST=Build and run on Galileo Gen2.
Change-Id: I0756b0f30b3488647530e2dd1a4ab62813815f3e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15859
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
mb() is used in src/arch/riscv/ and src/mainboard/emulation/*-riscv/.
It is currently provided by atomic.h, but I think it fits better into
barrier.h.
The "fence" instruction represents a full memory fence, as opposed to
variants such as "fence r, rw" which represent a partial fence. An
operating system might want to use precisely the right fence, but
coreboot doesn't need this level of performance at the cost of
simplicity.
Change-Id: I8d33ef32ad31e8fda38f6a5183210e7bd6c65815
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15830
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The Chrome EC codebase no longer supports the google/lars and
intel/kunimitsu boards. Disable the build in those platforms.
Change-Id: Ic4f5a1a34bb19ee31632c1ad8430c30f7154f138
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15869
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
per hw team's check and info from EDS, this pin needs to be pu 20K.
Otherwise SoC may not notice interrupt request from
EC over LPC because SERIRQ line is floating.
BUG=chrome-os-partner:55586
BRANCH=none
TEST=boot ok and Quanta factory verified the keyboard issue is gone
Signed-off-by: Kane Chen <kane.chen@intel.com>
Change-Id: I5b0213514ce152d4e2cecdda8786925495a0f24a
Reviewed-on: https://review.coreboot.org/15951
Tested-by: build bot (Jenkins)
Reviewed-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
PMIC/PMU: Set the iosstates for PMIC to assert the reset
signal, PMU to assert SLP_S0 signal.
Change-Id: Iec2dd659ea21f07d0bfe74194756786375cf775c
Signed-off-by: Shankar, Vaibhav <vaibhav.shankar@intel.com>
Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/15777
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These non-ascii & unprintable characters aren't needed.
Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15977
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15974
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I1c9af223d3598c4822905acce0cf9b1dca6ad1b6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287066
Reviewed-on: https://review.coreboot.org/15981
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch adds IO and IRQ information for UART 3/4 to the devicetree.
Patch with Change-Id: Ief5d70c8b25a2fb6cd787c45a52410e20b0eaf2e is needed.
Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0
Change-Id: I1d8fa16950079a47775f48166486415bd5d24f42
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15621
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch adds two SPD files with different DDR3 clk settings.
The user can choose which setting to use.
Lower clk settings saves power under load.
SoC Model GX-411GA supports only up to DDR3-1066 clk mode.
Both SPD settings were tested with memtest for several hours.
Power saving is around half a watt under heavy memory load.
Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0
Change-Id: Ibb81e22e19297fdf64360bc3e213529e9d183586
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15907
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch binds PCIe lanes 2 and 3 to one PCIe device.
PCIe device 2.4 becomes x2.
Tested with the connected FPGA on PCIe 2.4.
FPGA doubles transfer rate from/to the AMD.
Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0
Change-Id: Icee567272312a7df4c3b5a6db5b420a054ec3230
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15905
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This probably never happens, but since we already test for the presence
of the device, it makes no sense to try to configure it after its
absense was determined.
Change-Id: I9877dcd15819fb7949fa08a0954b05780df66316
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1347362
Reviewed-on: https://review.coreboot.org/15982
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Update RO_SECTION to match the changes in depthcharge:
https://chromium-review.googlesource.com/#/c/364261
BUG=chrome-os-partner:55713
Change-Id: I7238856cf73a62345778ea87e191a11190b7fb38
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15966
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch enables DPTF support for Intel Amenia
platform, adds the ASL settings specific to Amenia
boards.
BUG=chrome-os-partner:53096
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal in Amenia board. Navigate to
/sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: I400e2312a20870058f3a386004fad748d3ee4460
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15094
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
This patch enables DPTF support for Google Reef
platform, adds the ASL settings specific to Reef
boards.
BUG=chrome-os-partner:53096
TEST=Verify that the thermal zones are enumerated
under /sys/class/thermal in Reef boards. Navigate to
/sys/class/thermal, and verify that a thermal
zone of type TCPU exists there.
Change-Id: Ib43e4e9dd0d92fffc1b2c8459c552acd04ca0150
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15640
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
After the indentation is fixed in commit *mainboard: Format
irq_tables.c* [1], the comment is redundant. So remove it.
[1] Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a
Change-Id: Iebbcf10ee3cef1b4cf60ea34a6b3ad51e2208671
Reviewed-on: https://review.coreboot.org/15933
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Run the command below to format the files `irq_tables.c` of (mostly AMD)
mainboards correctly with GNU indent 2.2.10.
```
$ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l
```
Fix up the following two checkpatch.pl errors manually.
```
ERROR: that open brace { should be on the previous line
#1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129:
+ uint8_t reg[8] =
+ { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 };
ERROR: that open brace { should be on the previous line
#1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131:
+ uint8_t irq[8] =
+ { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 };
```
This is needed, so that follow-up commits, fixing checkpatch.pl errors
and warnings, won’t run into conflicts with the git commit hooks, when
for example, spaces instead of tabs are used for indentation.
Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/15932
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change EVT3 board id to 5.
BUG=chrome-os-partner:55320
TEST=None.
BRANCH=None
Change-Id: I020be47e1fdbf886c7c471d7fdcace1537875b6d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 63bd6541055172765c31a9b1220a24d4e3604cdc
Original-Change-Id: I21a8764ff95892430944778f4898d2f1d4c97fd7
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/362391
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/15949
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Almost all of the places where we have the degree symbol '°', it's
encoded as 0xc2 0xb0 (utf-8 encoding). There are a few places where it
is encoded as just a high ascii byte: 0xb0. Editors that support the
high ascii 0xb0 seem to support the utf-8 0xc2 0xb0 encoding as well,
but the opposite does not seem to be true.
Change the high-ascii degree symbols to utf-8 encoding.
Change-Id: I3d06289b802f45e938dc72b4c437fca56235b62b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15978
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Keep this enabled by default as most x86 platforms could have PCI-e
slots equipped with one of these Intel WiFi adapters.
The Kconfig entries under google boards had no function previously,
the variable was never referenced.
Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15931
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add next generation of BAPs (https://www.unibap.com/) SOC module,
called ode_e21XX.
Hardware is similar to e20XX (AMD G-Series GX-411GA Kabini),
but it includes a new AMD G-Series GX-412HC (Steppe Eagle)
and an updated Microsemi FPGA.
Changes to Olivehillplus:
- Add SuperIO Fintek F81866D
- Soldered down DDR3 with ECC
- User can choose between different DDR3 clk settings
(lowest setting can save up to 1.2W)
- Soldered down Microsemi M2S060 FPGA on PCIe lanes 2-3
Tested with:
- Payload SeaBIOS 1.9.1
- Lubuntu 16.04, Kernel 4.4.0
- Windows 10 (UART functionality)
Known problems:
- S3 not working
- IOMMU not working
Change-Id: I41f6a3334ad2128695a3f7c0a6444f1678d2626e
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15918
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Initial copy of olivehillplus.
Change-Id: Ibe9b450c05bfad15a95852addb1465ac2d3cef61
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15917
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use the ACPI generator for creating the Chrome OS gpio
package. Each mainboard has its own list of Chrome OS
gpios that are fed into a helper to generate the ACPI
external OIPG package. Additionally, the common
chromeos.asl is now conditionally included based on
CONFIG_CHROMEOS.
Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15909
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Due to GPE routing, raw GPIO cannot be used for indicating the wake
signal for touchpad. Instead we need to reference GPE pins.
BUG=chrome-os-partner:55670
Change-Id: Ie5d8473df4301c7beef0cae8fe84e71b2838261b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15947
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We need to enable DRAM ODT on kevin/gru board to improve the
DRAM signal. Note, if the DRAM ODT is enabled and set to 120ohms,
the sdram VREF need to adjust to 840mv.
This patch also makes following changes:
1. For compatiblity with the old board, add the
"sdram-lpddr3-hynix-4GB-666-no-odt.inc" and
"sdram-lpddr3-hynix-4GB-800-no-odt.inc" files
which do not enable sdram ODT.
2. Delete the 300MHz dram inc file. The 300MHz sdram config just
reduced 666MHz to 300MHz based on the 666MHz config file, and it is
not stable, so delete it.
3. Delete the 928MHz dram inc file, 928MHz sdram config still in
debuging, delete it for now.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Change-Id: If0248e1bc4cef2c298762080f1ca018653af0521
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 78d8a28e2d3489c99c9bba2c1c9aa76812e2e33f
Original-Change-Id: I35f0685782d6fb178a95780ec77c45f565dd2194
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/358763
Original-Commit-Ready: Dan Shi <dshi@chromium.org>
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15813
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update the write protect GPIO reported in ACPI to GPIO_75.
Also update the controller ID to "INT3452:01" which will
point at the goldmont device and includes write protect GPIO.
BUG=chrome-os-partner:55604
BRANCH=none
TEST=verify crossystem output for wpsw_cur.
Change-Id: Ibe6a013aaab18bfa2436698298177218ca934fab
Signed-off-by: Susendra Selvaraj <susendra.selvaraj@intel.com>
Reviewed-on: https://coreboot.intel.com/7929
Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com>
Tested-by: Petrov, Andrey <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15691
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Define LPC decode ranges for EC communication.
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu to ensure no EC timeout error
Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15898
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move mainboard post console init functionality (google_chrome_ec_init &
early_gpio programming) from verstage to bootblock.
Add chromeos-ec support in bootblock
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and boot kunimitsu till POST code 0x34
Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15786
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Currenty, boot reason is being added to elog only for some
ARM32/ARM64 platforms. Change this so that boot reason is logged by
default in elog for all devices which have CHROMEOS selected.
2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that
want to add details about watchdog reset in elog. This requires a
special region WATCHDOG to be present in the memlayout.
3. Remove calls to elog add boot reason and watchdog reset from
mainboards.
BUG=chrome-os-partner:55639
Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15897
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This is required to enable elog support in ChromeOS by default.
BUG=chrome-os-partner:55639
Change-Id: I9c97143d794de4bf220ddf67c0ca2eac2f7a326d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15896
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
